Drilling fleet. Capabilities. Agriculture. Water. Environment.
|
|
- Hilary Summers
- 8 years ago
- Views:
Transcription
1 Drilling fleet Capabilities Agriculture. Water. Environment.
2 Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function mini loader, an EDECO T30m mounted on a 5.6 tonne crawler track base and a HE175 truck-mounted rotary head rig.
3 Compact Field Rig EDECO 10s (Mounted on a one-tonne, four-wheel drive multi-function mini loader) The compact design of the 10s means this powerful rig fits into tight spots like basements, buildings, car park and sites with overhead and side obstacles. Operated by a 1-2 man crew, it is ideal for concrete coring, water bore installation and niche applications. Weight Rig with auger head 960 kg Powered by a Lombardini 12LD air-cooled diesel engine that produces rpm Travelling speed 5kph Gradient 25% (1 : 4) Drill rig rated capacity Auger Drilling: 3 continuous flight 20 m 2.1/4 l/d Hollow Stem 12 m 3.1/4 l/d Hollow Stem 10 m Core Drilling: NW Rod Size 20 m AW Rod Size 25 m Concrete Coring: 150mm - 500mm Insurance and Crew Safety All rigs are fully-crewed and appropriately insured. All crews are qualified and overseen by a licensed driller. All crew are appropriately trained to meet WH&S obligations. Drilling operations are supported by expert environmental science, geology and engineering staff that can be called upon to address the client s site environmental risk assessment, management and compliance obligations. Rotary heads Auger Head: Coring Head: Working stroke Pull down/up rpm rpm 1700 mm 1000 kg
4 Compact Field Rig EDECO 10s (Mounted on a one-tonne, four-wheel drive multi-function mini loader) Multi-function Crawler Rig EDECO T30m (Mounted on a 5.6 tonne crawler track base) Mounted Power Rig HE175 (Truck-mounted, hydraulic top drive rig) The compact design of the 10s means this powerful rig fits into tight spots like basements, buildings, car park and sites with overhead and side obstacles. Operated by a 1-2 man crew, it is ideal for concrete coring, water bore installation and niche applications. Weight Rig with auger head 960 kg Powered by a Lombardini 12LD air-cooled diesel engine that produces rpm Travelling speed 5kph Gradient 25% (1 : 4) Drill rig rated capacity Auger Drilling: 3 continuous flight 20 m 2.1/4 l/d Hollow Stem 12 m 3.1/4 l/d Hollow Stem 10 m Core Drilling: NW Rod Size 20 m AW Rod Size 25 m Concrete Coring: 150mm - 500mm Rotary heads Auger Head: Coring Head: Working stroke Pull down/up rpm rpm 1700 mm 1000 kg The military-designed T30m goes where other rigs can t go. Featuring a crawler base and tilting mast, it is ideal for uneven, soft or broken ground. Operated by a 2-3 man crew, it can drill through any strata. Equipment weights Drill 5,100 kg Compressor 1,080 kg Trailer 2,000 kg approx. Powered by a Deutz F3 L1011F air-cooled diesel engine producing 2500 RPM. Maximum travelling speed is 1.6 kph. Drilling performance NWY 300m Downhole 300m (6 ) HWY 240m hammer Carousel Hydraulically operated drill rod carousel Capacity 7 x 3m 2 7/8 rods Body Hydraulically powered crawler tracks Make Wirth Howden Max speed 1.6kph Rotary Head Low speed 2000 Nm High speed Nm Drill feed 0-6.4m/min Rotary drive 2 speed hydraulic (rapid traverse of 34m/min) capacity 7500 kg Pull out 5300 kg Down thrust 3250 kg Safe Working Load: Winch Pull - 2 fall 4000 kg Working table to pass 8-5/8 casing * Fitted with pipe boom for service winch allowing equipment to be brought to the drilling position through 180 deg Designed for military use, the HE175 is mounted on an Iveco Eurotrakker 6x6 RHD truck for rapid field deployment. Operated by a 3-4 man crew and jacked-up by four hydraulic stabliser legs, this powerful rig can drill through any strata to depths of up to 500m (rotary 300mm dia). Dimensions with running gear Length 4851 mm Width 2261 mm Height 2591 mm Track width 1778 mm Weight 6169 kg Rated capacity (No drill collars) Rotary drilling: Down the hole: 300 mm dia 500 m 300 mm dia 200 m 500 mm dia 200 m 500 mm dia 100 m Power pack Caterpillar 3306B DITA water-cooled diesel engine producing RPM Rotary head output Max torque Max speed Max torque (reverse) Spindle bore RPM RPM RPM 75 mm * Total working length 6.5 m below sheave block hook Maximum drill pipe 6.0m Rotary head stroke 4.4 m Hoist capacity (pull back) 170 Kn Feed capacity (pull down) 90 Kn Fast hoist speed 22 m/min Slow hoist speed 2.8 m/min Down feed (drilling) 0-2 m/min Gross crown block capacity 160 Kn
5 Drilling fleet Pricing Rigs are available on day rates or by the metre, plus costs (e.g. mobilisation, site induction, obtaining permits etc). Stand-by rates apply. Quotes and terms are available upon request. For more information please call or
GeoDrill. Geotechnical & Environmental Drilling Specialists
GeoDrill Drilling Specialists GEODRILL services GEODRILL specialises in the following methods for Geotechnical and drilling and other services. Drilling Methods Solid Flight Augering (100 and diameter)
More informationPVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling
More information1980 to Present Day. 1869 to 1914. 1914 to 1980 DANDO
1867 1940 DANDO 1868 1869 to 1914 1896 1914 to 1980 1980 to Present Day r ta n DANDO All rigs are manufactured at our headquarters in West Sussex, England DANDO AND MANUFACTURING Dando are proud of their
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationAtlas Copco Exploration Products. Explorac reverse circulation rigs
Atlas Copco Exploration Products Explorac reverse circulation rigs Deep hole exploration with reverse circulation In many cases, exploration drillers have to modify various types of drill rigs in order
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationSUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m
SUPER 600 Tracked Paver SUPER 600 Pave Widths 0.5m 2.7m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m Mini Paver for Maximum Efficiency on Minor Job Sites T hanks to its compact size, variable
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationUS&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Contractor Equip & Helicopter Ops
US&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Equip and Methods + Helicopter Ops 22Mar08 1 Unit Objective You will be able to explain how demolition contractors and their
More informationHCR. European series
HCR European series 1 INSIDE FURUKAWA Japan, a country of old traditions, has proven its highly technical performances in many different ways. Already, many years ago, Japanese electronic equipment contributed
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationSTOUCO Drilling Equipment
STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.esystems.com AIR HYDRAULIC DRILLING UNIT BE(F) AND BE(FP) AIR HYDRAULIC DRILLING UNIT BE(F) The basic design of the BE(F) consists
More informationCOMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA GEOTHERMAL FIELDS.
Proceedings 5 th African Rift geothermal Conference Arusha, Tanzania, 29-31 October 2014 COMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA
More informationINSITU TESTS! Shear Vanes! Shear Vanes! Shear Vane Test! Sensitive Soils! Insitu testing is used for two reasons:!
In-situ Testing! Insitu Testing! Insitu testing is used for two reasons:! To allow the determination of shear strength or penetration resistance or permeability of soils that would be difficult or impossible
More informationThe Blocks and Drilling Line
rotary drilling series Unit I, Lesson 5 The Blocks and Drilling Line Third Edition, Revised By L. D. Davis Published by PETROLEUM EXTENSION SERVICE The University of Texas at Austin Division of Continuing
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationsoil and rock 1.3 soil penetrometers 1.3.1 soil penetrometers page 96
soil and rock 1.3 soil penetrometers 1.3.1 soil penetrometers page 96 96 1.3.1 soil penetrometers tecnotest tecnotest s range of penetrometers Tecnotest manufactures a complete range of static, dynamic
More informationTopics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
More informationHYDRAULIC PILING RIG
HYDRAULIC PILING RIG ATTREZZATURA IDRAULICA PER PALI TECHNICAL SPECIFICATIONS DATI TECNICI HYDRAULIC PILING RIG PILING PALI Max depth Profondità max 293 ft 89,3 m Max diameter Diametro max 118 in 3000
More informationATLAS COPCO BLASTHOLE DRILLS PIT VIPER 311. Rotary drilling Hole diameter 9 in 12 1 4 in (229 311 mm) Maximum hole depth 135 ft (41 m)
ATLAS COPCO BLASTHOLE DRILLS PIT VIPER 311 Rotary drilling Hole diameter 9 in 12 1 4 in (229 311 mm) Maximum hole depth 135 ft (41 m) BUILT FOR PERFORMANCE Designed for comfort With a 110,000 lb (50 tonnes)
More informationAtlas Copco Surface Drill Rig. ROC F9 A powerful 25 kw tophammer combining strength, productivity and hole quality. Hole range 89 127 mm (3½ 5 )
Atlas Copco Surface Drill Rig ROC F9 A powerful kw tophammer combining strength, productivity and hole quality. Hole range 89 7 mm (½ ) Flexibility and mobility are two important factors for a smooth operation.
More informationAtlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 )
Atlas Copco Surface drill rigs SmartROC T35/ T40 Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) When smart means easy and efficient Main benefits Combines low fuel
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationMaersk Resilient. Maximised drilling efficiency and uptime. Optimised for concurrent activities
Maersk Resilient Maximised drilling efficiency and uptime Optimised for concurrent activities Maersk Resilient TYPE MSC CJ50-X100 MC, 350 ft jack-up drilling rig BUILT Keppel FELS, 2008 CLASS American
More informationAUTOMATIC HYDRAULIC DRILLING RIGS HH Series HH Series hydraulic hoist series The drilling industry is actively involved in developing new technologies to solve common problems, such as increasing safety
More informationWorldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationHYDRAULIC PILING RIG
HYDRAULIC PILING RIG ATTREZZATURA IDRAULICA PER PALI DIMENSIONS DIMENSIONI 45 45 Rotating jib Falchetto girevole Rotating mast Rotazione mast 3600-4900 TRANSPORT DIMENSIONS DIMENSIONI DI TRASPORTO 1120
More informationROTARY DRILLING COMPANY
DHR-200 (Depth Range 4000 m) DHR-200 (Depth Range 4000 m) TF 25 (Romanian) - 1 1/4" drilling line - 602 BAYLOL EDDY Current Brake KANIZSA-00 (DKG) - mast 42 m (17') max. hook load with 10 lines = 200 tons
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More information304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
More informationAtlas Copco Exploration Products. Christensen core drilling rigs
Atlas Copco Exploration Products Christensen core drilling rigs 2 Christensen exploration drilling rigs user-friendly, durable technology for high productivity Exploration drilling companies are constantly
More informationCAST GROUP s.r.l. Listino Prezzi Price List
CAST GROUP s.r.l. Listino Prezzi Price List Aggiornato al 01/06/2009 PIXY THE ARTICULATED TOOL-CARRIER & COMPACT LOADER CAST GROUP s.r.l. Via Taglio Sinistro 63/B 30035 Mirano (Venezia) Italia Tel 041/5701827
More informationV-Series. 4-Way Precision Lathe with Automated Cycles. www.weiler.de. Precision in Every Dimension. New product: the first 4-way precision
Precision in Every Dimension Service New product: the first 4-way precision lathe with automated cycles V-Series 4-Way Precision Lathe with Automated Cycles www.weiler.de Manual/Engine Lathes Cycle-Controlled
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More informationSKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More informationLEADSYSTEMS. Vertical Configuration. Aft Batter Below Grade. Side Batter. Forward Reach. Raised Leads Above Grade. Forward Batter
LEADSYSTEMS Vertical Configuration Aft Batter Below Grade Side Batter Forward Reach Raised Leads Above Grade Forward Batter LEAD SYSTEM Located in Hamilton, Ontario, Canada, Bermingham Foundation Solutions
More informationTechnical Data Valid for model year 2013. The Crafter
Technical Data Valid for model year 2013 The Crafter Information on fuel consumption and can be found within the technical data. Not all combinations of engine, gearbox and auto body design are possible.
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationWOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
More informationAMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12
AMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12 As At 08/01/03 1. OVERVIEW Amada Modular Flexible Manufacturing Cell The proposal enclosed is for a fully Automated, flexible
More informationPower Tools for Professionals
Power Tools for Professionals 35 th ANNIVERSARY SPECIAL Offer v alid un 31.12. 2 til 014 2014 1979 1984 1986 1988 1999 2003 S L O O T R E W O P F 35 YEARS O 2014 THE 35 YEAR ANNIVERSARY MODELS Limited
More informationHelping Our Customers Achieve Superior Results. Top Drive
Helping Our Customers Achieve Superior Results Top Drive Intelligent Accessories Canrig s commitment to drilling efficiency has resulted in the development of a line of intelligent top drive accessories.
More informationGeneral Dimensions and Weights - Non Loader
Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport)
More informationAn introduction to Reverse Circulation drilling
An introduction to Reverse Circulation drilling Reverse Circulation, or RC, drilling is a fast and cost efficient method of retrieving high quality samples from exploration and mine drilling. The system
More informationHYDRAULIC PILING RIG
HYDRULIC PILING RIG TTREZZTUR IDRULIC PER PLI TECHNICL SPECIFICTIONS DTI TECNICI HYDRULIC PILING RIG PILING PLI Max depth Profondità max 87 m Max diameter Diametro max 3000 mm Max diameter with casing
More information912. The engine for construction equipment.
912. The engine for construction equipment....... 24-82 kw at 1500-2500 min -1 These are the characteristics of the 912: Air-cooled 3-, 4-, 5-, 6-cylinder naturally aspirated in-line-engines. Direct injection.
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More informationBasic Parameters for Concrete Drilling and Sawing equipment
I V B S Internationaler Verband der Betonbohr- und Sägeunternehmungen I A C D S International Association of Concrete Drillers and Sawers A I E F S B Association Internationale des Entreprises de Forage
More informationGAS FLAWLESS - FORM C
DESCRIPTION OF THE VESSEL 1. GENERAL 1.1 Builder and Yard HIGAKI S/Y Hull No. H/N 595 1.2 Year built 2007 1.3 Flag MALTA 1.4 Signal Letters and Normal Station Watched 9HVB8 1.5 Classification Lloyds 1.6
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationHydraulic Excavators
Chapter 8 Hydraulic Excavators Hydraulic excavators are designed to excavate below the ground surface on which the machine rests. These machines have good mobility and are excellent for general-purpose
More information308E CR SB. Mini Hydraulic Excavator with Swing Boom
308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum
More informationSupplier ID: 26421. Local Office: GLASGOW 69 Buchanan Street Glasgow G1 3HL
M D & FOUNDATIONS MIDLANDS Supplier ID: 26421 MINI PILING PILING REINFORCED CONCRETE UNDERPINNING DRILLING & GROUTING SITE INVESTIGATION & PILE TESTING NATIONWIDE SPECIALIST PILING & FOUNDATION SERVICES
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationUPGRADED KIA CEE D TECHNICAL SPECIFICATIONS (EUROPE)
UPGRADED KIA CEE D TECHNICAL SPECIFICATIONS (EUROPE) Body and chassis Three- or five-door, five-seater C-segment hatchback, with all-steel unitary construction bodyshell. Choice of diesel and gasoline
More informationZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
More information303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
More informationDUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Heavy Duty Vertical Machining Centres DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 The unique inverted slideway design
More informationSample Career Ladder/Lattice for Energy (Petroleum Sector)
Click on a job title to see examples of descriptive information about the job. Click on a link between job titles to see the critical development experiences needed to move to that job on the pathway.
More informationRX 60 Technical data.
RX 60 Technical data. Electric forklift trucks RX 60-40 RX 60-45 RX 60-50 Achieve more. RX 60 Technical Data. This specification sheet to VDI Guidelines 2198 only gives the technical figures for the standard
More informationFTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
More informationTBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig. Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH
TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH Outline Field study Lessons learned Rig design changes Mechanization
More informationHMIS Top Drive System
System Description HMIS Top Drive System 250TON HMIS 475HP DOCUMENT NAME: 880025 REV 2 SYSTEM DESCRIPTION COPYRIGHT AND DISCLAIMER Tesco Corporation ("TESCO") has made every effort to ensure that this
More informationDYNAPAC COMPACT PAVER RANGE. Dynapac F1200C /F1200CS
DYNAPAC COMPACT PAVER RANGE Dynapac F1200C /F1200CS INTRODUCING THE DYNAPAC F1200. A remarkably compact yet powerful asphalt paver. With a laying capacity of 300 tonnes per hour, and a wide range of working
More informationPC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
More informationMANUAL FOR USE OF THE HYDRAULIC DRILLING RIG AF120
MANUAL FOR USE OF THE HYDRAULIC DRILLING RIG AF120 Serial Number : Language: English REV.00-B Carried out by: Q.P. 28/01/02 Approved by: Rev. Carried out by: Date: Approved by: Date: M A N U A L f o r
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationGrassroots Drilling. A History and Look Ahead. David Wennerstrom. ICOTA Roundtable October 2005 Canadian Chapter
Grassroots Drilling A History and Look Ahead David Wennerstrom ICOTA Roundtable October 2005 Canadian Chapter In the past 10 years CTD rigs have come to dominate much of the shallow gas drilling market
More informationSAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationFAG tools for mechanical mounting and dismounting of rolling bearings. Technical Product Information
FAG tools for mechanical mounting and dismounting of rolling bearings Technical Product Information Contents Mechanical mounting and dismounting of rolling bearings 2 Tools for mounting 4 Mounting tool
More informationThe mechanics finish work on time today...
The mechanics finish work on time today......and the next crane mounting too. Crane component kits by SWF Krantechnik Your mechanics are satisfied. Your customer is satisfied. You are satisfied. And that
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More information303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
More informationZAXIS series HYDRAULIC EXCAVATOR
ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /
More informationZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationManual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE)
Manual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE) Nearshore CPT is not as difficult as it might seem. Most CPT companies do already have most of the necessary equipment
More informationSPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
More informationGEOTHERMAL DRILLING ABSTRACT
Presented at Short Course V on Conceptual Modelling of Geothermal Systems, organized by UNU-GTP and LaGeo, in Santa Tecla, El Salvador, February 24 - March 2, 2013. GEOTHERMAL TRAINING PROGRAMME LaGeo
More informationECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : BME800G Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Length : 54.9 m BME800G CONTENTS 3 5 6 7 8 9 10 11 12 13 14 17 SPECIFICATIONS Power Plant Model: HINO P11C-VC Type:
More informationNew MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan
AGRICULTURE GARDENING New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan ENGINE Engine Nº of Cylinders Displacement Rated RPM (25) Water Cooled Diesel 1,125 cc 2,500
More informationVOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationEngine catalogue. Marine Diesel engines. MAN range - light duty
Engine catalogue Marine Diesel engines MAN range - light duty ENG 10 November 2010 Marine Diesel engines Engine Power Num. of Displacement Design kw cylinders cm3 R6-730 537 6 12,8 inline R6-800 588 6
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More information1013 E. The engine for agricultural equipment.
1013 E. The engine for agricultural equipment.... -186 kw at 2300 rpm These are the characteristics of the 1013 E: Modern water-cooled 4- and 6-cylinder in-line engine Turbocharging with charge air cooling
More informationHYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
More informationPos. Qty. Article Description Price /
Offer 1 1 Vertical CNC-machining centre model FZ 08.2 KS with NC-swivel head Year of construction: 2002, weight: 3.100 kg Machine-No. 223-11 Scope of delivery: Column moving machining centre with fixed
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More informationBælte-lifte Crawlerlifts
Bælte-lifte Crawlerlifts PrisListe 2015 TRACKED PLATFORMS - 2 - EASY LIFT R130 Max. working height: 12.20 m Max. working outreach (200 kg): 06.50 m Turntable rotation: 320 Aluminium basket 1100x700x1100
More information