STOUCO Drilling Equipment

Size: px
Start display at page:

Download "STOUCO Drilling Equipment"

Transcription

1 STOUCO Drilling Equipment

2 Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift tr. travel speed : 0 30 m/min (0-98 ft/min) travel mode : PS to SB / SB to PS travel distance : 2,5 mtr Lift. head travel speed : 0 12 m/min (0-39 ft/min) travel mode : Up / Down travel distance : ~6 mtr Tubular range : Drillpipe 3,5" 5" 5,5" 6 5/8" : Casing 5" 7" 9 5/8" 13 3/8"

3 Automatic Greasing System Material (cabinet) : AISI 316L Outside dimensions (cabinet) : LxBxH = 1.2 x 0.5 x 1.2 mtr Weight : approx. 250 kg E-motor : 0.18kW, 400V/3ph/50Hz, IP56 Pump capacity : 41.6cc per day Operating temperature : -20 upto + 80ºC Working pressure : upto 200 bar Numbers of ports : 12 Port connection : R ¼ Volume of grease reservoir : 30 Ltr. Allowable grease sorts : Grease on mineral oil base till NLG1-class2, DIN : For: -20ºC to 70ºC NLG # 2 (Shell Alvania EP2) : For: -45ºC to 5ºC NLG #0 (Shell Alvania EPR0)

4

5 BOP Guidance System Type :Stouco GD320.5 Overall SWL GD320-5 travel Dolly travel GD travel speed Dolly travel Weight Classification Operation area : 50T (Horizontal). : ± 14 mtr. from centreline ship to portside : ± 16 mtr. from centreline ship to starboard : ± 5.5 mtr. up / down : 0 5 m/min (0-16,4 ft/min) travel mode: PS to SB / SB to PS : 0 5 m/min (0-16,4 ft/min) travel mode: Up / Down : 28T : ABS : West Africa

6

7

8 Derricksman Cabin Type :Stouco-CA2 Material : AISI 316L. Outside dimensions : LxBxH = 2,25 x 1,35 x 2,1 mtr Door width : 600mm Capacity : 2 Persons Weight : approx kg Painting : pickled & glass blasted Included : Heating : 3x Window wipers : 1x Adjustable chair : Insulation : Ventilation hatch Control : From chair & touch screen

9 Drill Floor Manipulator Technical Specification: Weight : 8T Height in stowed position : 2540 mm Total length with boom retracted : 5150 mm Stroke telescopic boom : 5100 mm Luffing angle from horizontal : Slewing angle : 120 Gripperhead tilting angle : Push/pull force horizontal arm : 30 kn Lift capacity at min. reach : 1.9T Lift capacity at max. reach : 1T Slewing torque : 116 knm Gripping head torque max. : 1.75 knm Clamping force max. : 30 kn Telescoping time over 5,1m stroke in/out Luffing time over 45 up/down Slewing speed max. Gripperhead rotation continuous max. : 20 sec. : 15 sec. : 3 rpm : 5 rpm Clamping range O.D. set no. 1 : from 3,5" to 9,5" Clamping range O.D. set no. 2 : from 9.5" to 16" Clamping range O.D. set no. 3 : from 16" to 26"

10 Fairleaders Fairleaders for (steel)wire rope guidance Capacity Number of rollers : 1T upto 20T : 4x (for guiding in all directions)

11 Finger board Monkey board Finger board type Monkey board type :Stouco - FB55 :Stouco - FB658 :Stouco - FBDC :Stouco - MB14 SMST-FB55 : Maximum size drill pipes : 5 ½ : Maximum stands in complete board : 196 SMST-FB658 : Maximum size drill pipes : 6 5/8 : Maximum stands in complete board : 144 SMST-FBDC : Maximum drill collar size : 9 ½ : Maximum stands in complete board : 8 SMST-MB14 : Length : 4.5 mtr. (14-9 ) : With : 1.29 mtr. (4-2 3/4 ) : SWL (one person at end) : 100 Kg (220 lb.) : Test load : 200 Kg (440 lb.) : Storage : Vertical down

12 Foldable cabin platform Type :Stouco.FCP-750x Load on platform : 150 Kg/m 2 Capacity : 1 person with tools (100kg) Folding : by hydraulic cylinder Railing heigt : 1100 mm Weight : abt 700kg Materials : S355J2G3 Surface treatment : All parts Hot Dip Galvanized 70 mu Operating area : North Sea

13 BOP Guidance System Type :Stouco GD320.5 Overall SWL GD320-5 travel Dolly travel GD travel speed Dolly travel Weight Classification : 50T (Horizontal). : ± 14 mtr. from centreline ship to portside : ± 16 mtr. from centreline ship to starboard : ± 5.5 mtr. up / down : 0 5 m/min (0-16,4 ft/min) travel mode: PS to SB / SB to PS : 0 5 m/min (0-16,4 ft/min) travel mode: Up / Down : 28T : ABS

14 Jigger Winch Jigger winch for replacement of the hydraulic hoses via a drag chain Type :Stouco-JW817 Capacity : 17 hoses 4 Steel layers ¾ hose OD : 32 mm Maximum travel of hoses to trolley : 15,4 mtr Overall dimensions (lxbxh) : 0,771 x 2,290 x 10,407 mtr. Weight : 4T

15 Monkey board Diving board Type :Stouco.HDRB :Stouco.HDRB Load on platforms Static hold Diving board stroke Monkey board stroke Monkey board Diving board : 1 person at tip approx. 80 kg SWL in operation : 150 Kg : 1500 mm (59 ) in abt. 40 sec. : 1700 mm (67 ) in abt. 40 sec. : Fixed : Travel speed 0-16 m/min (52.5 ft./min)

16 Man Working Basket Type :Stouco.MWB.2,5.TT.5,6/10,6 SWL in basket Allowed in basket Min. reach (boom horizontal) Max. reach (boom horizontal) Stroke of basket Luffing angle below/above horizontal Rotating Operating pressure (dynamic load) System test pressure Required flow Weight : 250 Kg : 2 persons : 6200 mm : mm : 2x2125 mm : 60 / 85 degrees : 60 degrees : abt 160 bar : 320 bar : abt 50 L/min : 2880 Kg

17 Pipe Handling Crane Type :Stouco-PHC14 Installed power : 2x30kW HPU (100% backup) Minimum handling : 20 stands per hour Tubular Capacity : 3 ½ upto and including 6 5/8 SWL : 1,4T (3000 lb.) All over weight : 11,5T (25400 lb.)

18 Riser-Casing Transporter Type :Stouco-RCT400 Installed power Overall SWL Hook speed : 225kW : 2x25T (55115 lb.) : 0-5 m/min (0-16 ft./ min) Riser Handling mode (SWL 35 tons) : 0-30 m/min (0-98ft./ min) Casing handling (SWL max. 4 tons) RCT travel speed (FWD-AFT) : 0 25 m/min (0-82 ft/min) (FWD-AFT) Overhead speed (PS-SB) : 0 8 m/min (0-26 ft/min) Riser handling mode 0 30 m/min (0-98 ft/min) Casing handling mode (max. 4T)

19 Setback stabber A stabbing machine that can operate as a - Setback stabber - Collar stabber - Casing stabber Type Stouco-SBS4000 Capacity : 900kg Installed power : 15 kw HPU (EX II 2G Eex m II T6) Backup control on HPU Tubular capacity : 3 ½ upto and including 6 5/8 drill pipe : 4 ¾ upto and including 9 ½ drill collar : 4 ½ upto and including 13 3/8 casing Mounting level : abt. 9 mtr. above drill floor Outreach, boom horizontal : abt 4 mtr. Boom luffing/lowering : 10 up and 90 down, from vertical position Lowering time : abt. 30 sec. Rotating : 160 CW and 160 CCW Rotating speed : 0 2 rpm Telescoping distance : 2350mm in abt. 15 sec. Weight : 3.5T

20 Extendable Sinkerbar platforms Specification The structure comprises of two adjustable type of platforms in the derrick at 56 & 49 mtr. level. Both platforms will be used to handle one sinker bar. The stroke with or without load of the extendable platforms is approx mm. A third platform is located at 52 mtr., to create an easy access between the platforms. At the EPT 49 a two persons waiting station is located All functions are hydraulically operated in an open loop circuitry, with a max. operating pressure of 180 bar. All components are designed for a max. pressure of 350 bar. - Designs load on platforms is 9000N/mm 2 (ABS)

21 Variable working platform Type :Stouco.WFLS-250 SWL in basket Allowed in basket Min. reach Max. reach Stroke 1 st telescopic arm Stroke 2 nd telescopic arm Operating pressure Weight : 250 Kg : 2 persons : 0 mtr : 11.5 mtr. : 3.5 mtr. : 1.2 mtr. : 210 Bar (3000 psi) : abt kg (5510 lb)

22

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom

More information

Maersk Resilient. Maximised drilling efficiency and uptime. Optimised for concurrent activities

Maersk Resilient. Maximised drilling efficiency and uptime. Optimised for concurrent activities Maersk Resilient Maximised drilling efficiency and uptime Optimised for concurrent activities Maersk Resilient TYPE MSC CJ50-X100 MC, 350 ft jack-up drilling rig BUILT Keppel FELS, 2008 CLASS American

More information

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features: ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................

More information

THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85

THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85 THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS New Model Presentation In this presentation, we will outline the innovations and technical advances integrated into the new 90 tonne metre crane of the Amco

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

LOC 400 DRILLING RIG HUISMAN PRODUCT BROCHURE

LOC 400 DRILLING RIG HUISMAN PRODUCT BROCHURE LOC 400 DRILLING RIG HUISMAN PRODUCT BROCHURE RILLING GENERAL INTRODUCTION 2 Huisman offers complete drilling packages and is dedicated to explore and realise new solutions to improve drilling operations.

More information

RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features

RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane

More information

288 Range 24-28 tm. Technical data. www.hiab.com. Min. 4685 Max. 20970

288 Range 24-28 tm. Technical data. www.hiab.com. Min. 4685 Max. 20970 HIAB 288 Range 24-28 tm Min. 4685 Max. 20970 2842 Technical data www.hiab.com HIAB XS 288 Contents Introduction...3 Safety Regulations...4 Disclaimer...4 Explanation of Symbols...4 Explanation of Diagrams...4

More information

1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB

1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:

More information

Helping Our Customers Achieve Superior Results. Offshore Handling Equipment

Helping Our Customers Achieve Superior Results. Offshore Handling Equipment Helping Our Customers Achieve Superior Results Offshore Handling Equipment Offshore Handling Equipment Product Jack-Up Semi / Drillship Derrick Top Drive / Dolly Retract Drawworks Torque Wrench Drilling

More information

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

301.7D. Mini Hydraulic Excavator

301.7D. Mini Hydraulic Excavator 301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb

More information

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l

Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity

More information

HC 110. Hydraulic Crawler Crane FEATURES

HC 110. Hydraulic Crawler Crane FEATURES HC 110 Hydraulic Crawler Crane FEATURES 110 tons (100 mt) max lift capacity 230 ft. (70 m) max main boom length 200+70 ft. (61+21 m) max lift crane boom & jib length Power up/down and freefall on main

More information

TELESCOPE Motorized Lighting Suspension

TELESCOPE Motorized Lighting Suspension TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend

More information

PALFINGER marine cranes are developed to meet a wide range of specific applications...

PALFINGER marine cranes are developed to meet a wide range of specific applications... Marine Cranes PALFINGER marine cranes are developed to meet a wide range of specific applications... Foldable knuckle boom cranes (PC and PK). Compact all-rounders. Thanks to their sophisticated crane

More information

Boom and fly capacities for this machine are listed by the following sections:

Boom and fly capacities for this machine are listed by the following sections: Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range

More information

RH 12.5 RH 16.5. Crawler Excavator Specifications

RH 12.5 RH 16.5. Crawler Excavator Specifications Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic

More information

CHRISTENSEN 140. Surface core drilling rig for medium to large depths

CHRISTENSEN 140. Surface core drilling rig for medium to large depths CHRISTENSEN 140 Surface core drilling rig for medium to large depths GAME CHANGER THE NEW CHRISTENSEN 140 EXPLORATION DRILL RIG FROM ATLAS COPCO CAN BE THE GAME CHANGER YOU NEED. EQUIPPED WITH THIS NEW

More information

Worldwide network in over 40 countries.

Worldwide network in over 40 countries. Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers

More information

Product catalogue, tank cleaning systems

Product catalogue, tank cleaning systems Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance

More information

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling

More information

AF 280 HYDRAULIC DRILL RIG

AF 280 HYDRAULIC DRILL RIG AF 280 HYDRAULIC DRILL RIG AF 280 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 280 is a drill rig that can easily overcome any kind of problem on the job site, even the most difficult ones.

More information

2010 APPLICATION REFERENCE GUIDE

2010 APPLICATION REFERENCE GUIDE 2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE

More information

HMIS Top Drive System

HMIS Top Drive System System Description HMIS Top Drive System 250TON HMIS 475HP DOCUMENT NAME: 880025 REV 2 SYSTEM DESCRIPTION COPYRIGHT AND DISCLAIMER Tesco Corporation ("TESCO") has made every effort to ensure that this

More information

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length

More information

KESLA FORESTERI. Timber Loaders. Uplifting Innovations WWW.KESLA.COM

KESLA FORESTERI. Timber Loaders. Uplifting Innovations WWW.KESLA.COM KESLA FORESTERI Upliing Innovations Timber Loaders WWW.KESLA.COM The unique V-base of the Kesla Foresteri boom section guarantees power and durability with one or two extensions. How do you prefer Adopt

More information

Ingersoll-Rand LIFTSTAR. Manriding Winches. Classification and compliance with safety requirements

Ingersoll-Rand LIFTSTAR. Manriding Winches. Classification and compliance with safety requirements Classification and compliance with safety requirements Meet the toughest personnel lifting requirements in the offshore industry The LIFTSTAR RLP Manriding winches are designed to the toughest type approval

More information

ASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE

ASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE Adress: FETIH AREA ADANA RINGROAD NO:113 ASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE DESCREPTION UNITE OF MEASURE L3+2 L4+2 L5+2 L6 Maksimum hidrolik uzanma ( yatay) Maximum hydraulic outreach (Ver.) 14,45

More information

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK

More information

Post Pounders & Post Hole Augers

Post Pounders & Post Hole Augers Post Pounders & Post Hole Augers High & Heavy Hitters Side Mast Our most popular model for all heavy and light duty post placement Ability to move sideways a total of 16 Four hammer head mounting positions

More information

18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS

18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS 18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels

More information

Directional seated valves type VP 1

Directional seated valves type VP 1 Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual

More information

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.

Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com. IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR

303.5E CR, 304E CR, 305E CR, 305.5E CR 303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw

More information

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated

More information

PAINTING LINE GENERAL SPECIFICATIONS

PAINTING LINE GENERAL SPECIFICATIONS PAINTING LINE Page 1 / 17 Code Brand Model PAINTING LINE TECHNICAL INFORMATION: Working width: 1700 mm Working height: 1100 mm Dimensions of boards - thickness: 2 mm - 3,2 mm - width: 1000 mm - 1620 mm

More information

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) G E N E R A L D ATA. BOOM 4-section, 10.7 m 34.7 m

TADANO ROUGH TERRAIN CRANE. (Left-hand steering) G E N E R A L D ATA. BOOM 4-section, 10.7 m 34.7 m DATE August, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-500EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 50,000 kg at 2.5 m BOOM 4-section, 10.7 m 34.7 m DIMENSION Overall length approx.

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : BME800G Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Length : 54.9 m BME800G CONTENTS 3 5 6 7 8 9 10 11 12 13 14 17 SPECIFICATIONS Power Plant Model: HINO P11C-VC Type:

More information

E08 E10. Compact Excavators

E08 E10. Compact Excavators E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition

More information

WOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear

WOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear 1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch

More information

» 30,000 to 60,000 lb. capacity» Single and tandem axle

» 30,000 to 60,000 lb. capacity» Single and tandem axle ROLL-OFF CABLE HOISTS Tel: 800.285.0666 sales@wastequip.com www.wastequip.com Extendable Tail (EX) cable hoists are ideal for areas with clearance issues that require a low loading height.» 30,000 to 60,000

More information

Product catalogue, pipe and sewer cleaning systems

Product catalogue, pipe and sewer cleaning systems Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes

More information

Fire Safety In High Rise Building

Fire Safety In High Rise Building Fire Safety In High Rise Building CLASSIFICATION OF BUILDINGS AS PER NATIONAL BUILDING CODE 1. GROUPING. Group A - Residential : Lodgings, Dwellings, Dormitories, Flats, Hotels. Group B Group C - Educational

More information

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS 18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre

More information

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK

More information

DRILLFLEX CNC HORIZONTAL MACHINING CENTER

DRILLFLEX CNC HORIZONTAL MACHINING CENTER DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic

More information

Drilling fleet. Capabilities. Agriculture. Water. Environment.

Drilling fleet. Capabilities. Agriculture. Water. Environment. Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function

More information

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile dredges catalogue ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB company profile History Dragflow S.r.l. was born at the end of the 1980 s as a manufacturer of heavy duty submersible agitator

More information

WWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES

WWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES WWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK PAGE 02 ENGLISH STATUS 01. 2013

More information

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of

More information

BLASTING SYSTEMS. Turbine blasting systems. Air blasting systems. Automatic Painting plants

BLASTING SYSTEMS. Turbine blasting systems. Air blasting systems. Automatic Painting plants BLASTING SYSTEMS Turbine blasting systems Air blasting systems Automatic Painting plants 1, Dust Collector 2, Cyclone Separator 3, Sand (shot) Storage Hopper 4, Bucket elevator 5, Primary separator 6,

More information

Highly flexible couplings

Highly flexible couplings Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations

More information

TSC Engineering Ltd is an ISO 9001:2008 accredited company.

TSC Engineering Ltd is an ISO 9001:2008 accredited company. The Rig Mechanisation Business Unit within TSC Group designs, manufactures, builds and supplies a range of material handling equipment for use on Jack-up Vessels, Semisubmersible Vessels and Drill Ships.

More information

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR 303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)

More information

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés.

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés. LM 55 UNDERGROUND coring DRill Technical Overview Copyright 2011. Tous droits réservés. LM 55 MODULAR CORE DRILL Copyright 2011. All rights reserved. The LM 55 is a compact underground diamond coring drill

More information

all VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101

all VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101 ergonomic FORKLIFT vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production.

More information

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no. 5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model

More information

Product advantages Mobile crane 1090/2

Product advantages Mobile crane 1090/2 Product advantages Mobile crane 1090/2 Max. lifting capacity: 90 t at 3 m radius Max. height under hook: 72 m with biparted swing-away jib Max. radius: 56 m with biparted swing-away jib Performance profile

More information

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2 TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION

More information

COMPACT. Drilling COMPACT

COMPACT. Drilling COMPACT COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.

More information

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL

TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK

More information

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation

More information

Container design and types

Container design and types Container technology can transport mainly piece goods over great distances. The strong container protects good during the transport, the standardized dimensions let them store in well defined stacks and

More information

ALL TERRAIN HYDRAULIC CRANE

ALL TERRAIN HYDRAULIC CRANE ALL TERRAIN HYDRAULIC CRANE Dimensions 26' 7" (8 100) R 37' 2" (11 325) Ra 34' (10 350) R 35' 4" (10 775) Ra 32' 5" (9 875) 18' 3" (5 570) 8' 4" (2 530) R 26' 11" (8 200) Ra 24' (7 325) 42' 0" (12 795)

More information

Hydraulic Crawler Crane

Hydraulic Crawler Crane Hydraulic Crawler Crane Model : 7250S Max. Lifting Capacity: 250 t x 4.6 m Max. Lifting Capacity With ower Jib: 25.0 t x 18.0 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 91.4 m Max. Fixed Jib

More information

DMU 75 / 95 monoblock

DMU 75 / 95 monoblock www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous

More information

EXPORT w w w. k r a n m a n. c o m

EXPORT w w w. k r a n m a n. c o m EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load

More information

Cardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com

Cardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can

More information

Hoistable Deck for Ferries

Hoistable Deck for Ferries TALAT Lectures 2702 Hoistable Deck for Ferries 9 pages, 7 figures Basic Level prepared by T. Höglund, Royal Institute of Technology, Stockholm Objectives: to describe as an example for the structural use

More information

ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100

ENGINE POWERED 5-10t. ~ r. - )5 F-ii'iii;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity

More information

Machine Moving. By Norm Berls

Machine Moving. By Norm Berls Machine Moving By Norm Berls Machine Moving Sources Metalworking: Sink or Swim by Tom Lipton Google Images Vendor Web Pages YouTube Own experiences Formerly professional riggers and movers moved most heavy

More information

Accessories for GF and RA machines

Accessories for GF and RA machines Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling

More information

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842 l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load

More information

Butt Fusion Welding of HDPE Pipes Work Procedure

Butt Fusion Welding of HDPE Pipes Work Procedure Butt Fusion Welding of HDPE Pipes Work Procedure A pipeline is as good as its weakest point. Accordingly it is not only important that quality pipes and components are used in a piping system, but also

More information

Topics of the Presentation

Topics of the Presentation Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents

More information

HYDRAULIC EXCAVATOR. ZAXIS-2 series

HYDRAULIC EXCAVATOR. ZAXIS-2 series ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable

More information

VOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig. Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH

TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig. Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH Outline Field study Lessons learned Rig design changes Mechanization

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN

AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete

More information

Volkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19)

Volkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19) 19 Engine - Cooling System (Page GR-19) Cooling system draining and filling general information Body components, layout Engine components, layout Radiator fan run-on checking Recommended mixture ratios

More information

VITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A

VITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A Technical Data Manual Model Nos. and pricing: see Price List Vacuum tube collector based on the heat pipe principle For the utilisation of solar energy VITOSOL r 200-T SP2A Product may not be exactly as

More information

304.5. Mini Hydraulic Excavator

304.5. Mini Hydraulic Excavator 304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator

More information

After close to 50 years working with an unloading

After close to 50 years working with an unloading NEUERO Continuous Ship Unloader for Feed Mill TOMAS KISSLINGER, NEUERO Industrietechnik, Germany A BSTRACT After close to 50 years working with an unloading system, a new system which would serve today

More information

HOW HYDRAULIC TRUCK CRANES WORK

HOW HYDRAULIC TRUCK CRANES WORK HOW HYDRAULIC TRUCK CRANES WORK Heavy rains spawned by Hurricane Danny flooded many parts of Charlotte, NC. Flood waters rose so quickly in Little Sugar Creek that the underpinnings of a train trestle

More information

SPACIOUS CABIN TEMPERATURE TELESCOPIC

SPACIOUS CABIN TEMPERATURE TELESCOPIC THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce

More information

Catalogue. 2 Wheel Drive Tow Carts Model Part No Picture Description Packaging. www.helitowcart.com info@helitowcart.com +1.418.561.

Catalogue. 2 Wheel Drive Tow Carts Model Part No Picture Description Packaging. www.helitowcart.com info@helitowcart.com +1.418.561. Catalogue 2 Wheel Drive Tow Carts V90 151 0002 00 A Application: Economical version for R22, R44 & R66 only, on regular surfaces. Ideal for private owners that operate from local airport. With rigid arm

More information

Mini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide

Mini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure

More information

DIAMOND Retractable Rodding Robot Model SPRAYROD-R

DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic

More information

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm

More information

BARRIER LIFT SYSTEM 2 BARRIER LIFT SYSTEM

BARRIER LIFT SYSTEM 2 BARRIER LIFT SYSTEM BARRIER LIFT SYSTEM BARRIER LIFT SYSTEM The crash rated elkosta Barrier Lift System BLS offers maximum security for highly sensitive entry or exit points against unauthorised vehicles attempting to break

More information

EC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM

EC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM VOLVO EXCAVATOR EC210 LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM Engine power, gross: 119 kw (160 hp) Operating weight: _ LC : 20.5 ~ 21.9 t _ NLC : 20.4 ~ 21.2 t Buckets (SAE): 950 ~ 1250

More information

Manual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE)

Manual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE) Manual: Nearshore CPT Testing NEARSHORE CONE PENETRATION TESTING (TOP PUSH TECHNIQUE) Nearshore CPT is not as difficult as it might seem. Most CPT companies do already have most of the necessary equipment

More information

Flash Butt Welding Machines

Flash Butt Welding Machines Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process

More information

Technical Description LR 611 Crawler Loader

Technical Description LR 611 Crawler Loader Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924

More information

Radial piston pumps type R and RG

Radial piston pumps type R and RG Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power

More information

Fredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.

Fredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm. Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one

More information