FEATURES Rods are threaded and bonded to piston The original miniature pneumatic cylinder Buna-N U -cup rod seals for smooth leakproof operation Buna-
|
|
- Camron Thompson
- 7 years ago
- Views:
Transcription
1 MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models. From sub-miniature (5/32 bore) to heavy duty ( /8 bore), the extensive Clippard line provides a wide selection of bore sizes to suit any application requirement. An even wider range of strokes are available in the complete Clippard line of miniature cylinders, in stroke sizes ranging from /4 to Clippard Instrument Laboratory, Inc. (53)
2 FEATURES Rods are threaded and bonded to piston The original miniature pneumatic cylinder Buna-N U -cup rod seals for smooth leakproof operation Buna-N U -cup piston seals for full power, low friction and trouble-free performance The Clippard line offers numerous choices in the mounting of Clippard Minimatic cylinders. The cylinders are provided in several types of mounting styles including plain end, stud mount, block mount, and clevis mount (male and female). In addition, a complementary line of mounting hardware, including brackets, male and female clevises and Clippard s Minimatic super structures are available for almost any application. Clippard cylinders are of original design, pioneered by the world s most experienced manufacturer of miniature pneumatic equipment. They are of the finest OEM quality, fully tested for outstanding performance and long life. Special steps in manufacture insure the high quality of Clippard cylinders. These include: ground, polished and roller burnished rods to protect seals and provide smooth action; tube ID precision through ballizing with carbide precision balls; high precision screw machine parts manufacture, based on concentric design that lends itself to close tolerance machining. The reputation Clippard has earned in the field is a result of our policy to test every cylinder (00%) we manufacture. Every Cylinder is 00% tested MINIMATIC CYLINDER 00% tested Pneumatic & hydraulic performance Sturdy, compact and long life Temperature range: 30 F to 80 F Cylinder Tubes: Machined from heavy wall, cold-drawn brass tubing; ballized internally for precise size, fine finish and low seal friction; /8 bore: hard coat aluminum Piston Rods: Except where otherwise specified, all rods are stainless steel, ground, polished and roller burnished for long seal life, low friction and smooth action Pistons: Brass in all models except aluminum in 7/8 bore single acting series Springs: Stainless steel for long life and resistance to corrosion Seals: Buna N compound, impervious to a wide range of hydraulic fluids, liquids, and gases; rod seals replaceable on models where applicable; piston seals replaceable only on threaded construction models Bumpers: Resilient bumpers of Buna-N or polyurethane absorb shock, increase life and reduce noise level Finish: All external brass parts are bright-dipped to resist corrosion and preserve finished appearance; /8 bore: hard coated aluminum with black oxide steel heads Did you know... Clippard built the first miniature rolled construction air cylinder, the 3PS-/2 in 949. Delrin and Viton are registered trademarks of Du Pont Clippard Instrument Laboratory, Inc. (53)
3 Minimatic Cylinders pg. MINIMATIC CYLINDER Medium Engineering Data Force Factor Rec. Max. Working Pres. Piston Seals Rod Seals Design Features Rod Dia. Rod End Ports Tapped Construction 5/32 Bore 85 Air psi U-Cup.062 Plain 0-32 Rolled or 3-56 Welded /4 Bore 85 Air psi U-Cup.35 Thd Rolled 6.35 mm 3/8 Bore 86 Air.0 25 psi U-Cup 3/6 Plain 0-32 RF Silver Soldered 3/8 Bore 87 Air &.0 25 psi -Air U-Cup Vee /8 Plain 0-32 RF Silver Double Acting Hyd. 500 psi -Hyd.* Ring Soldered 3/8 Bore 86 Air.0 25 psi U-Cup /8 Thd RF Silver Spring Extend Soldered Air Retract 9/6 Bore 88 Air psi U-Cup 3/6 Plain 0-32 RF Silver Soldered 9/6 Bore 89 Air & psi -Air U-Cup Vee 3/6 Plain 0-32 RF Silver Double Acting Hyd. 500 psi -Hyd.* Ring Soldered 9/6 Bore 88 Air psi U-Cup Vee /4 Thd Threaded Spring Extend Ring Air Retract 9/6 Bore 90 Air psi U-Cup /4 Thd. /6 Threaded Heavy Duty NPT 9/6 Bore 9 Air & psi -Air T- Vee /4 Thd. /6 Threaded Heavy Duty Hyd. 000 psi -Hyd.* Ring Ring NPT Double Acting ** 7/8 Bore 92 Air psi U-Cup /4 Thd. /8 Threaded NPT 7/8 Bore 93 Air & psi -Air T- Vee /4 Thd. /8 Threaded Double Acting Hyd. 000 psi -Hyd.* Ring Ring NPT ** 7/8 Bore 92 Air psi U-Cup Vee /4 Thd. /8 Threaded Spring Extend Ring NPT Air Retract -/8 Bore 95 Air psi U-Cup Vee 3/8 Thd. /8 Threaded Double Acting Ring NPT ** -/8 Bore 94 Air psi U-Cup 3/8 Thd. /8 Threaded NPT Quick Cylinder Computations: Cylinder Force = Force Factor x Pressure Displacement = Force Factor x Stroke (Force factor given in table above equals effective piston area) Remarks 45 Tapered rod end on SM-2 Spring force extend- 2 oz. Spring force compressed- 5 oz. Spring force extend- 6 oz. Spring force compressed-0 oz. Model 3PS-/2 is rolled construction with non-rotating thd. brass rod, others; non-thd. stainless steel Spring force extend- 2 oz. Spring force compressed- 30 oz. Min. of 4 psi to retract Spring force extend- 2 oz. Spring force compressed- 30 oz. 9PS-3/4 & 9SS-3/4 have nonrotating, thd., stainless steel rods, others; non-thd., stainless steel Spring force extend-.6 oz. Spring force compressed- 3.7 oz. Min. of 9 psi to retract Spring force extend- 2 lb. Spring force compressed- 4 lb. Spring force extend- 2 lb. Spring force compressed- 4 lb. Sintered bronze rod bushing Spring force extend- 7 lb. Spring force compressed- 2 lb. Sintered bronze rod bushing Min. of 23 psi to retract Spring force extend- 7 lb. Spring force compressed- 2 lb. Sintered bronze rod bushing Low friction - 2 psi to operate Spring force extend- 8 lb. Spring force compressed- 2 lb. **NOTE: Double rods also available in these models. Temperature: 30 F to +230 F *Consult factory for hydraulic applications 84 Clippard Instrument Laboratory, Inc. (53)
4 Single Acting Single Acting Single Acting SM-2 SM-3- SM-6 SUB-MINIATURE MINIMATIC CYLINDER Bore: 5/32 Mount: Rear Thread Type: Bore: 5/32 Mount: Rear Thread Type:.063 #0-80 thd. on -T model only Bore: /4 Mount: Body* Type:.25 *Super structure recommended Super structure 2327 pictured here is recommended for mounting the SM-6 cylinder. For more information see page 0. Available Stroke Lengths: /4 Materials: Stainless steel body, piston & rod, Buna-N U-cup, Beryllium copper spring "L" #6-32 thd..740 "U" cup seal Model SM-3-2 SM-3-3 SM-3-4 Stroke /2 3/4 Length L #0-32 thd..88 #0-32 thd..32 #0-32 thd. #3-56 thd. #3-56 thd. Available Stroke Lengths: 3/8 Materials: Brass body, Buna-N U-cup, stainless steel piston & rod Did you know... The tiny SM-2 cylinder gives 2 lbs of force at 00 psi. Materials: Stainless steel tube and rod, brass piston, Buna-N U-cup SM-2 Clippard Instrument Laboratory, Inc. (53)
5 3SS-AR-/2 3PS-/2 First Cylinder SS- 3CS- 3/8 BORE BRASS MINIMATIC CYLINDER Spring Extended Mount: Body* *Super Structure recommended Mount: Clevis Available Stroke Lengths: / #5-40 thd..468 #8-32 thd..32 5/6-24 thd. L /6-24 thd. Available Stroke Lengths: /2 Ports: End or Side L #0-32 port 2 #0-32 port #0-32 port typ. Stroke /2 2 3 Length L Add -T after stroke for a 0-32 x /2 rod thread #0-32 port Stroke /2 2 3 Length L Add -T after stroke for a 0-32 x /2 rod thread Brass Rod - non-rotating.437 To order: Add stroke length to the end of the part number To order: Add stroke length to the end of the part number 86 Clippard Instrument Laboratory, Inc. (53)
6 3BDS- 3BDD- 3SD- 3CD- 3/8 BORE BRASS MINIMATIC CYLINDER Mount: Block Available Stroke Lengths:, 2, 3, 4, 5, 6 Add -T after stroke for a 5-40 x /2 rod thread + stroke.25 typ stroke.28 + stroke #0-32 ports #0-32 mtg. Mount: Block Available Stroke Lengths:, 2, 3, 4 Double Rod stroke #0-32 mtg..25 Add -T after stroke for a 5-40 x /2 rod thread + stroke.687 #0-32 holes Available Stroke Lengths:, 2, 3, 4 Add -T after stroke for a 5-40 x /2 rod thread Mount: Clevis Available Stroke Lengths:, 2, 3, stroke #0-32 port typ. 5/6-24 thd. Add -T after stroke for a 5-40 x /2 rod thread stroke #0-32 ports Clippard Instrument Laboratory, Inc. (53)
7 9PS-3/4 9BS- 9SS- 9CS- 9/6 BORE BRASS MINIMATIC CYLINDER Mount: Body* *Super Structurre recommended Mount: Block Mount: Clevis Available Stroke Lengths: 3/4 Non-Rotating Shaft #0-32 thd..87 5/32-32 thd #0-32 port typ..32 Stroke 3/4 /2 2 /4 3 Length L A Add -T after stroke for a 0-32 x /2 rod thread /4-20 mtg Stroke 3/4 /2 2 /4 3 Length L Add -T after stroke for a 0-32 x /2 rod thread L L #0-32 port.87 L A 0-32 port #0-32 port typ. To order: Add stroke length to the end of the part number To order: Add stroke length to the end of the part number Note: On 3/4 stroke rod is hexagonal stainless steel (non-rotating) and threaded 0-32 x 5/8 Stroke 3/4 /2 2 /4 3 Length L Add -T after stroke for a 0-32 x /2 rod thread To order: Add stroke length to the end of the part number 88 Clippard Instrument Laboratory, Inc. (53)
8 9BDS- 9BDD- 9SD- 9CD- 9/6 BORE BRASS MINIMATIC CYLINDER Mount: Block Available Stroke Lengths:, 2, 3, 4, 5, 6 Add -T after stroke for a 0-32 x /2 rod thread.53 + stroke.87 typ Mount: Block Available Stroke Lengths:, 2, 3, 4, 5, 6 Double Rod Add -T after stroke for a 0-32 x /2 rod thread /32-32 thd. 3 + stroke + stroke /4-20 mtg. #0-32 ports Available Stroke Lengths:, 2, 3, 4, 5, 6 Add -T after stroke for a 0-32 x /2 rod thread stroke Mount: Clevis Available Stroke Lengths:, 2, 3, 4, 5, stroke 2 + stroke /2 + stroke /4-20 mtg. #0-32 ports.32 #0-32 port typ. Add -T after stroke for a 0-32 x /2 rod thread.28 #0-32 port typ Clippard Instrument Laboratory, Inc. (53)
9 9SS-AR- H9S- S H9S- D H9C- S 9/6 BORE BRASS HEAVY DUTY CYLINDER Spring Extended Mount: Clevis /4-28 thd. /4-28 thd. /4-28 thd. Available Stroke Lengths: /2-20 thd. /2-20 thd. typ. /4-28 thd. /2-20 thd. Stroke 2 3 Length L "L" stroke "L" /6-27 NPT 4 Available Stroke Lengths:, 2, 3, 4, 5, 6 Stroke 2 3 Length L Exhaust /6-27 NPT port /6-27 NPT typ..562 /2-20 thd. flats /6-27 NPT To order: Indicate stroke in box.687 To order: Indicate stroke in box flats To order: Indicate stroke in box flats 90 Clippard Instrument Laboratory, Inc. (53)
10 Consult factory for hydraulic applications H9C- D H9U- S H9U- D H9D- D 9/6 BORE BRASS HEAVY DUTY CYLINDER Mount: Clevis Available Stroke Lengths:, 2, 3, 4, 5, 6 Mount: Universal typ. typ. /4-28 thd. /4-28 thd. /2-20 thd. both ends 5/8 typ stroke /6-27 NPT Stroke 2 3 Length L "L" /4-28 thd. /2-20 thd. both ends typ. /4-28 thd. typ. typ stroke stroke /6-27 NPT Mount: Universal Available Stroke Lengths:, 2, 3, 4, 5, 6 Available Stroke Lengths:, 2, 3, 4, 5, 6 Double Rod Note: Maximum recommended hydraulic working pressure for heavy duty cylinders is 000 psig (2*stroke) /2-20 thd. typ. /6-27 NPT typ..562 /2-20 thd /6-27 NPT + stroke To order: Indicate stroke in box flats To order: Indicate stroke in box flats To order: Indicate stroke in box flats To order: Indicate stroke in box Clippard Instrument Laboratory, Inc. (53)
11 7/8 BORE BRASS HEAVY DUTY CYLINDER Consult factory for hydraulic applications 7SS-AR- 7SS- 7SD- 7S- Spring Extended Mount: Universal Available Stroke Lengths: 2 /4-28 thd. /4-28 thd. /4-28 thd. /4-28 thd /4-20 thd. /8-27 NPT Available Stroke Lengths: 3/4-20 thd. 3/4-20 thd. 3/4-20 thd. both ends Available Stroke Lengths:, 2, 3, 5, 7, 9 Available Stroke Lengths: stroke /8-27 NPT thru flats /8-27 NPT /8-27 NPT typ. flats flats 92 Clippard Instrument Laboratory, Inc. (53)
12 Consult factory for hydraulic applications 7D- 7DD- 7/8 BORE BRASS HEAVY DUTY CYLINDER Mount: Universal Available Stroke Lengths:, 2, 3, 5, 7, 9 /4-28 thd. + Stroke /4-28 thd. both ends typ..28 3/4-20 thd. both ends typ stroke Mount: Universal Available Stroke Lengths:, 2, 3, 5, 7, 9 Double Rod Did you know... Leonard Clippard made the prototype cylinder piston seals by punching leather disks from his kids old shoe tongues (2*Stroke) Stroke.28 typ. 3/4-20 thd. both ends Note: Maximum recommended hydraulic working pressure for heavy duty cylinders is 000 psig..28 -thru /8-27 NPT both ports /8-27 NPT both ports flats Clippard Instrument Laboratory, Inc. (53)
13 Features /8 BORE HEAVY DUTY ALUMINUM CYLINDER Very low breakaway force - allows for a consistent stroke speed (no sudden jumps) Hard-anodized aluminum body - attractive, yet durable Force factor of - 00 psig input provides 00 lbs. output force Available in many stroke lengths (even up to 8 ft. in special quantities!) Brass piston, stainless steel rod 3/8 8SS- 8S- /8-27 NPT both ports /4 -thru 3/8 flats.33 Mount: Universal.274 3/8-24 thd stroke Available Stroke Lengths: -20 thd. Available Stroke Lengths: 3/8-24 thd. -20 thd. both ends /8-27 NPT " - 20 thd. both ends.28 -thru 3/8-24 thd flats /8-27 NPT flats 94 Clippard Instrument Laboratory, Inc. (53)
14 /8 BORE HEAVY DUTY ALUMINUM CYLINDER 8CSD- 8SD- 8DD- 8D- Mount: Clevis Double Rod typ. Mount: Universal Available Stroke Lengths:, 2, 3, 4, 5, 6, 7, 8, 9, 0, 2, 4, 6, 8, 20 3/8-24 thd. typ. + stroke 3/8-24 thd. both ends 3/8-24 thd (2 x stroke) stroke stroke "-20 thd. /8-27 NPT both ports 3/8-24 thd thd. Available Stroke Lengths:, 2, 3, 6.28 typ. -20 thd. both ends "-20 thd. both ends stroke /8-27 NPT both ports stroke /8-27 NPT both ports thru dia -thru.32 slot flats Available Stroke Lengths:, 2, 3, 4, 5, 6, 7, 8, 9, 0, 2, 4, 6, 8, flats /8-27 NPT both ports Available Stroke Lengths:, 2, 3, 4, 5, 6, 7, 8, 9, 0, 2, 4, 6, 8, 20 Clippard Instrument Laboratory, Inc. (53)
15 767 3/8 BORE MOUNTING BRACKETS #0-32 thd..200 (2) places.062 #8-32 thd. - thru thru both sides.87 Male Clevis 996 Mounts in rear of cylinder tapped Ceramic Insulator Use with cylinder having 8-32 threaded shaft to insulate cylinder from heat or electricity.25 slot.593 hex. Mounting Bracket (flat) #8-32 thd deep Female Clevis Use with cylinder having 8-32 threaded shaft thru both sides slot.200 (2) places.328 hex. Mounting Bracket (angled) Clippard Instrument Laboratory, Inc. (53)
16 #0-32 thd deep.87 r. typ thru both sides slot.203 (2) req d r. hex /6 BORE MOUNTING BRACKETS.87 r. typ. pin /4-28 thd..343 r. sq Lockwasher /4-28 thd. (7/6 hex. nut) (2) req d 996 #0-32 thd thru both sides Female Clevis Rod Clevis Assembly 509 For use with cylinders having 0-32 threaded shaft slot pin hex..26 (4) holes Male Clevis Mounts in rear of cylinder tapped 0-32 Mounting Mounting Bracket (flat) Bracket (angled) Clevis Mounting Bracket Mounting Bracket (angled).26 (2) holes Clippard Instrument Laboratory, Inc. (53)
17 505 7/8 BORE MOUNTING BRACKETS pin /4-28 thd Rod Clevis Assembly sq..32 Lockwasher Foot Mounting Bracket /4-28 thd. (.437 hex. nut) (2) holes 509 Clevis Mounting Bracket pin.26 (4) holes 98 Clippard Instrument Laboratory, Inc. (53)
18 .28 (4) holes pin /8 BORE MOUNTING BRACKETS FB typ..03 thru Female Clevis Mounting Bracket pin.28 (4) holes sq. 3/8-24 thd. Rod Clevis Assembly pin.28 Lockwasher 3/8-24 thd. (9/6 hex. nut) Male Clevis Mounting Bracket 2 2 Clippard Instrument Laboratory, Inc. (53)
19 SUPER STRUCTURE Here s a building block concept to speed construction of small equipment, fixtures, jigs and tooling. Machined steel blocks adapt to any position on the column and base. Offset extensions are provided through use of fixture and block mounting shafts of various lengths. Use of proper size brass slotted adapter permits mounting small bore cylinders or other parts. Column base is drilled for mounting. The Super Structure is extremely solid and secure, yet fully adjustable. Perpendicular mounting block 236 (black oxide finished steel) 2362 " typ. 5/6-24 socket head cap screws sq. " typ..25 5/6-24 socket head cap screws sq. "D" Inline mounting block 2363 (black oxide finished steel) 2364 Part # D Slotted adapters (brass) Perpendicular mounting block (black oxide finished steel) " typ. 2 5/6-24 socket head cap screws " typ. 5/6-24 socket head cap screws sq. sq. Inline mounting block (black oxide finished steel).82 -thru Bracket mounting adapter block 4 #0-32 thd. -/2 deep 00 Clippard Instrument Laboratory, Inc. (53)
20 Cylinder mounting squeeze block 2327 CMB (for SM-6) "L" thru thru.32 - thru Cylinder mounting squeeze blocks (for 3/8 & 9/6 standard bore) Part # A /8 (for 9/6 stand. bore cylinder) /6 (for 3/8 stand. bore cylinder) "A" - thru Fixture and bracket mounting shafts (black oxide finished steel) Part # L SQUEEZE BLOCKS Column and mounting base (black oxide finished steel) thru socket head set screws.32 typ. /4-20 thd. (4) places Clippard Instrument Laboratory, Inc. (53)
21 Miniature Swing-In Automated Arbor Press Clippard Modular Valve Two Hand No Tie Down Clamping Circuit with Adjustable Pressure Clippard Fittings Clippard MAV-3 Limit Valves with Cam Actuator Clippard Polyurethane Hose Clippard Pneumatic Sequencing Control Clippard UDR-08- /2 /2 Bore Stainless Steel Cylinder Clippard PG-0 Pressure Guage Super Structure Clippard s Squeeze Block Adjustable Fixturing Clippard /8 Bore Aluminum Cylinder Clippard JFC-3A Flow Control Valve Clippard Pressure Indicator IND-3-YL Press Fixture Arbor Press Clippard Cams C Clippard MAV-3 Limit Valve Clippard Swivel Rod End Clippard MAV-3 Limit Valve with PC-Y Button 02 Clippard Instrument Laboratory, Inc. (53)
SMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationFDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationHAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
More informationOriginal Line Cylinders
Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non- Original Line Steel (Bell Ring Style) Original
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationWILROY. Operation. Optional Diaphragm Rupture Detection HYDRAULICALLY ACTUATED DIAPHRAGM PUMP
WILROY ATEX Approved HYDRAULICALLY ACTUATED DIAPHRAGM PUMP Williams and Milton Roy have combined technologies to design a pump blending the proven mroy hydraulic by-pass diaphragm design with the Williams
More informationPUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationThe "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.
The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.com (c) 2/20/03 The David steam engine is a simple oscillating steam engine, many plans
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationActuators & Positioners LP - Linear Pneumatic Piston Actuator. Cylinder Actuators. High resolution, sensitivity, and fast response
Data Sheet DS/LP-EN Rev. F Actuators & Positioners LP - Linear Pneumatic Piston Actuator Cylinder Actuators High resolution, sensitivity, and fast response Available with 4 to 20mA position feedback Cylinders
More informationGEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationPlastic Injection Molding
Training Objective After watching this video and reviewing the printed material, the student/trainee will understand the principles and physical operations of the plastic injection molding process. An
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationModel Marine Engine Requires No Castings
Model Marine Engine Requires No Castings EXHAUST PORTS No. 29 No. 31 CROSSHEAD-GUIDE BRACKET No. 29 (STEAM PORT) CYLINDER BLOCK R CYLINDER COVERS No.31 CYLINDER SUPPORT No.29 (STEAM PORT) VALVE LINER VENT,
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationCHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
More informationAUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612
AUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612 Len & Jerry's specializes in finding solutions to reduce: Weight deflection/vibration frequency cost Problems found frequently
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationBlock and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationTHE SIMPLEX HAND PUMP
INTRODUTION HND PUMPS THE SIMPLEX HND PUMP Pivoting linkage reduces wear for longer pump life. djustable pivot for the absolute lowest handle effort. Large bronze piston for more speed and durability.
More informationRear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationITT Industrial Products
ITT Industrial Products Providing custom industrial solutions to meet customers application needs globally. ITT Control Technologies GmbH under the ITT Enidine brand provides quality energy absorption
More informationCOMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More informationMASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationExperience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
More information2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationARB AIR LOCKER Air Operated Locking Differentials
CKMTA12 & CKMTA24 On-Board Air Compressor Kit, Maximum Performance Specs: ITEM # QTY DESCRIPTION PART # NOTES 01(a) 2 COMPRESSOR ASSEMBLY (12V) CKM01 1 Voltage 12 Volts (CKMTA12), 24 Volts (CKMTA24) 01(b)
More informationREGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationTooling CORPORATION. Scandinavia AB www.btmscand.se. Standard Punches, Dies, Strippers, & Holders +46 480 868 75
733461 Tooling Standard Punches, Dies, Strippers, & Holders Lance-N-Loc is a sheet metal clinching system which creates a strong mechanical joint without the use of external fasteners or welding. The metals
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationHT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationHC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
More informationBERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationBETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS PART NUMBER: 132581 REVISION: A RELEASE DATE: 24 March 2000 Page 1 of 10
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationPiston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationBaumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More information7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationPRODUCT RELEASE CKMTA12 / 24. Copyright 2011 by ARB Corporation Limited
PRODUCT RELEASE CKMTA12 / 24 Copyright 2011 by ARB Corporation Limited ARB 4x4 ACCESSORIES 720 SW 34Th Street Tel: (425) 264-1391 Renton, Washington 98057 Fax: (425) 264-1392 USA North and South American
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationSystem Accessories Pricing. Page 0 Effective 7/02
System Accessories Pricing Page 0 Effective 7/02 Firetrace Tubing 200005 Firetrace Detection Tubing (FDT) (Per Foot) (Available in continuous lengths up to 333 ft.) Accessories 400001 400004 400061 400060
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationEROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS
MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M SPECIALTY COPPER ALLOYS FOR THE AEROSPACE INDUSTRY EROSPACE LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS NBM s corporate
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationOP300S / OP350 2:1 RATIO TRANSFER PUMP
OP300S / OP350 2:1 RATIO TRANSFER PUMP OPERATING MANUAL WITH PARTS IDENTIFICATION Copyright 2013 International Pump Manufacturing, Inc. This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. Read and
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More information2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationWorld Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationA&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.
More informationPneumatic. PXC Limit Switches. Authorised Distributor TTS Valve Technologies Sdn Bhd
Pneumatic PXC Limit Switches Limit Switches Series PXC High durability Very good repeat accuracy Design for process duty cycle Push-in or threaded connection Versatile and easily maintained Wide range
More informationMUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
More informationTypical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
More informationValves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More information