1 SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes Available with corrosion resistant, non-magnetic White Bronze plating Meets all performance requirements for MIL-C Between Series Adapters For SMA Between Series Adapters, see pages Tyco Electronics offers a complete line of SMA connectors designed for performance to 18 GHz to satisfy the growing demand for SMA connectors in the wireless communications industry. The SMA product line offers stainless steel bodies, as well as nonferrous metals. Various plating options are available, including Gold and White Bronze. The SMA interface is fully compatible with Mil-C While still offering various options on military (QPL) approved connectors, Tyco Electronics has developed a complete offering tailored to the commercial Communications industry. This includes 3 piece flexible cable products for popular RG 316, 142 and RD 316 cable utilizing industry standard HEX crimps. The SMA series meets the performance, quality and application requirements of the commercial marketplace. This includes White Bronze plating, a unique finish developed by Tyco Electronics to address the performance needs of the telecommunications market. This plating is highly resistant to wear, and contains no ferrous metals, thus displaying excellent intermodulation characteristics. To satisfy the broad range of commercial applications, SMA connectors are available in a broad range of standard configurations including; straight and right-angle cable applied plugs, bulkhead cable jacks, two and four hole flange mount panel jacks, straight and right-angle pcb mount jacks and various between and in series adapters. Numerous packaging and testing options are also available to meet specific system criteria as well. Additionally, standard military approved (QPL) interfaces are offered as well. Including connectors for semi-rigid cable and micro strip applications. The 3 Piece SMA offering is designed especially for applications in cellular infrastructure where InterModulation Products (IMP) must be minimized. By limiting non-linearities within the connectors, IMP is reduced and increased channel capacity can be offered. 100
2 Specifications MIL-C Applicable Paragraph General Material 3.3 Steel corrosion resistant per ASTM-A-582 and ASTM-A-484, Type 303. Beryllium copper per ASTM-B-196. PTFE Fluorocarbon per ASTM-D Finish Center contacts shall be gold plated to a min. thickness of [.00005] in accordance with MIL-G-45204, ASTM-B-488. All other metal parts shall be finished as to provide a connector which meets the corrosion requirements. Design 3.4 The design shall be such that the outline shown in this catalog and the interface dimensions of MIL-STD-348A are met. Electrical Insulation Resistance 3.11 The insulation resistance shall not be less than 10,000 megohms. Corona Level 3.22 Refer to applicable military slash sheet, product drawing or spec. Dielectric Withstanding Voltage 3.17 Refer to applicable military slash sheet, product drawing or spec. RF High Potential 3.23 Refer to applicable military slash sheet, product drawing or spec. Contact Resistance 3.16 Refer to applicable military slash sheet, product drawing or spec. VSWR 3.14 Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on cable used. RF Leakage 3.26 Refer to applicable military slash sheet, product drawing or spec. Insertion Loss 3.27 Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on cable used. Mechanical Force to Engage The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force is not applicable. Coupling Nut Retention lbs. min. Applicable for plug connectors only. Coupling Proof Torque in.-lbs. min. Applicable for plug connectors only. Cable Retention 3.24 Refer to applicable military slash sheet or consult factory. Mating Characteristics 3.7 Applicable to jack connectors only. Reference MIL-STD-348A for dimensions; oversize test pin.953 [.0375] min. dia., [ ] deep, insertion force 3 lbs. max. with.940 [.0370] min. dia. pin, withdrawal force 1 oz. min. with.902 [.0355] max. dia. pin. Connector Durability 3.15 The connector to be tested and its mating connector shall be subjected to 500 insertion and withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. Recommended Mating Torque 7 to 10 in.-lbs. Environmental Vibration 3.18 Specification MIL-STD-202, method 204, test condition D Shock 3.19 Specification MIL-STD-202, method 213, test condition I Thermal Shock 3.20 Refer to applicable military slash sheet or consult factory. Corrosion (Salt Spray) 3.13 Specification MIL-STD-202, method 101, test condition B. Moisture Resistance 3.21 Specification MIL-STD-202, method 106. No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity. 101
4 Interface Mating Dimensions D Plug B F H G C Plane Note 2 B A A C D B Plane Note UNS-2A Thd. G D UNS-2B Thd. E E G H K F J Plug Plug A H Dimension Minimum Maximum A B C D E F G H Jack Dimension Minimum Maximum A B C D E F G H J K Notes: 1. ID to meet VSWR and contact resistance when mated with /-.013 [ /-.0005] Pin. 2. When fully engaged, the two reference planes must coincide with metal to metal contact. 3. Metric equivalents (to the nearest 0.01mm) are given for general information only. 103
5 Flexible Cable Straight Cable Plug, Solder A 30.2 [1.187] [.312] Hex. Plane 16.7 [.658] Heat Shrink Tubing Dimension Instruction Part A Sheet No. 55, 58, 141, 142, Stainless, Gold1 No Solder , 303, , 188, 316 Stainless, Gold1 No Solder Coupling nut is passivated stainless steel Straight Cable Jack, Solder 25.6 [1.007] Plane 16.6 [.654] A Heat Shrink 6.4 Tubing [.250] Hex. Dimension Instruction Part A Sheet No. 55, 58, 141, 142, Stainless, Gold No Solder , 303, Bulkhead Cable Jack, Solder [1.225] A Plane 11.4 [.450] 0 [.374] 3.2 Max. [.125] Panel Ø 6.4 [.250] Min. [.312] Hex. Shrink Tubing 6.0 [.235] Min. Recommended Mounting Hole 104 Note: Part Numbers are RoHS compliant except: Indicates non-rohs compliant. Dimension Instruction Part A Sheet No. RG 55, 58, 141, 142, 300 Stainless, Gold No Solder , 188, 316 Stainless, Gold No Solder
6 Right-Angle Cable Plug, Solder Flexible Cable (Continued) Plane 16.9 [.666] 13.5 [.530] 10.5 [.413] [.312] Hex. A 25.9 [1.020] Heat Shrink Tubing Dimension Instruction Part A Sheet No. 55, 58, 141, 142, 223, 303, 400 Stainless, Gold1 Yes Solder , 188, 316 Stainless, Gold1 Yes Solder Coupling nut is passivated stainless steel Straight Cable Plug, Clamp 19.0 [.750] A [.312] Hex Dimension Instruction Part A Sheet No. 174, 188, 316 Stainless, Pass. Yes Solder Straight Cable Jack, Clamp 17.8 [.700] A [.312] Hex Dimension Instruction Part A Sheet No. 174, 188, 316 Stainless, Pass. Yes Solder
7 Flexible Cable (Continued) Bulkhead Feedthrough Cable Jack, Clamp 22.6 [.890] Max [.450] Plane [.374] 3.2 Max. [.125] Panel Ø 6.4 [.250] Min , UNS-2A [.312] Hex. Recommended Mounting Hole 6.0 [.235] Min. Instruction Part Sheet No. 174, 188, 316 Stainless, Pass. Yes Solder Right-Angle Cable Plug, Clamp Plane 16.9 [.665] 12.9 [.509] 10.0 [.392] [.312] Hex [.710] Max [.562] Max. Instruction Part Sheet No. 174, 188, 316 Stainless, Pass. Mechanical Solder Straight Cable Plug, Crimp Plane 25.4 [1.00] 22.4 [.883] [.312] Hex. 106 Crimp Tooling Instruction Sheet Part No. 174, 179, 187, 188, 316 Stainless, Pass. Mechanical Solder/Crimp RD316 Stainless, Pass. Mechanical Solder/Crimp , 142, 223, 400 Stainless, Pass. Mechanical Solder/Crimp , 179, 187, 188, 316 Brass, White Bronze Mechanical Solder/Crimp Use die to crimp RD316 ferrule. 2Use die to crimp center contact.
8 Flexible Cable (Continued) Straight Cable Jack, Crimp 21.3 [.837] Plane 19.3 [.761] 33.1 [1.304] 6.35 [.250] Hex [1.080] Max. Style A Heat Shrink 6.4 Tubing Hex. [.250] Hex. [.312] Style B Crimp Tooling Instruction Sheet Style Part No. 174, 316 Brass, Nickel Mechanical Solder A , 141, 303 Stainless, Pass. Mechanical Solder B , 188, 316 Stainless, Pass. Mechanical Solder B , 196 Stainless, Pass. Mechanical Solder B Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule crimp. Bulkhead Feedthrough Cable Jack, Crimp 6.4 [.250] Min. Lock Washer 26.4 [1.040] 11.4 [.450] 3.2 Max. [.125] Panel 6.0 Min. [.235] [.312] Hex Recommended Mounting Hole Crimp Tooling Instruction Sheet Part No. 174, 179, 187, 188, 316 Stainless, Pass. Mechanical Solder/Crimp RD316 Stainless, Pass. Mechanical Solder/Crimp , 141, 303 Stainless, Pass. Mechanical Solder/Crimp , 142, 223, 400 Stainless, Pass. Mechanical Solder/Crimp , 188, 316 Brass, Nickel Mechanical Crimp Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule crimp. 2Use die to crimp center contact. 3Use die to crimp RD316 ferrule. DANIELS is a trademark of Daniels Manufacturing Corporation. 107
19 Panel Mount 4 Hole Flange Mount Jack Receptacle, Straight Terminal 1.3 Slot Width Ø 1.3 Sq. 8.6 [.340] Typ. Plane [.299] 4 Plcs. [.102] Body Material Contact Slot Width RF Leakage Temperature Part & Finish Captivation +.076/-.025 [+.003/-.001] db min. Range No. Stainless, Passivated Epoxy 0.5 [.018] -(60-fGHz) -65 to 125 C Hole Flange Mount Plug Receptacle, Tab Terminal 9.9 [.390] 0.1 [.005] Thk. X 1.2 Wide Tab 8.6 [.340] Typ. 4 Plcs. [.102] 12.9 [.507] 2.5 [.100] Sq. Body Material Contact Tab RF Leakage Temperature Part & Finish Captivation Width db min. Range No. Stainless, Passivated Epoxy 1.3 -(60-fGHz) -65 to 125 C Hole Flange Mount Jack Receptacle, Tab Terminal 2.5 [.100] Sq Plcs. [.340] [.299] 0.13 [.005] Thk. X 0.5 Wide [.020] Tab 4 Plcs. [.102] Body Material Contact Tab RF Leakage Temperature Part & Finish Captivation Width db min. Range No. Stainless, Passivated Epoxy.51 [.020] -(60-fGHz) -65 to 125 C
20 2 Hole Flange Mount Jack Receptacle, Panel Mount, Tab Terminal UNS-2A 2.5 [.100] 0.13 [.005] Thk. X 1.27 Wide Tab 5.7 [.223] 12.2 [.481] Ø 15.9 [.625] Plane 7.59 [.299] [.102] 2 Plcs. Body Material Contact Horizontal RF Leakage Temperature Part & Finish Captivation Tab db min. Range No. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125 C Hole Flange Mount Jack Receptacle, for Microstrip Transmission Line Circuits Plane [.175] [.299] 3.2 [.125] 0.3 [.010] Sq. 8.6 [.340] Typ. 2.2 [.085] [.102] 4 Plcs. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125 C Hole Flange Mount Jack Receptacle, for Microstrip Transmission Line Circuits 3.2 [.125] Ø 2.2 [.085] 1.2 [.049] Ø 0.3 [.010] 5.7 [.223] 12.2 [.481] Ø 15.9 [.625] Plane [.299] [.102] 2 Plcs. Stainless, Passivated Epoxy -(60-fGHz) -65 to 125 C
21 Field Replaceable Hermetic Launchers (Continued) 4 Hole Flange Mount Jack Receptacle with EMI/RFI Gasket UNS-2A EMI Gasket Accepts Pin A 8.6 [.340] 2 Plcs. Plane [.299] 0.1 [.005] 4 Plcs. [.102] Material & Finish Captivation Pin Diameter A Stainless, Passivated Mechanical.38 [.015] Hole Flange Mount Jack Receptacle without EMI/RFI Gasket Sq. Accepts Pin A Plcs. [.340] [.299] [.102] 4 Plcs. Material & Finish Captivation Pin Diameter A Stainless, Passivated Mechanical.91 [.036] Hole Flange Mount Jack Receptacle with EMI/RFI Gasket Plane 0.1 [.005] Min. EMI Gasket Accepts Pin A [.299] 5.6 [.222] 12.2 [.481] Ø 15.9 [.625] [.102] 2 Plcs. Material & Finish Captivation Pin Diameter A Stainless, Passivated Mechanical.30 [.012] Stainless, Passivated Mechanical.38 [.015] Stainless, Passivated Mechanical.46 [.018] Hole Flange Mount Jack Receptacle without EMI/RFI Gasket, Field Replaceable Hermetic Launchers 5.7 [.223] 2 Plcs. [.102] 12.2 Ø 15.9 [.481] [.625] [.299] Accepts Pin Dia A 120 Material & Finish Captivation Pin Diameter A Stainless, Passivated Mechanical.51 [.020] Stainless, Passivated Mechanical.91 [.036]
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
SMB Series Subminiature RF Connectors ONLINE CATALOG Snap-on mating Frequency range DC-4 GHz Lightweight and economical SLB and SMC connectors also shown for comparison 104 John W. Murphy Drive P.O. Box
SMA Series Subminiature RF Connectors Screw-on mating Frequency range DC-18 GHz High performance Rugged construction ONLINE CATALOG 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com
SMA Captivated Solderless Contact Connectors for Semi-Rigid Cable The Johnson captivated solderless contact connectors for semi-rigid cable provide a unique solution for high frequency cable assemblers.
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
MICRODOT Coaxial Connectors Introduction Product Facts Designed to accept 50, 70 and 93 ohm miniature coaxial cables Three types of connectors: Screw-on Series, Slide-on Series and Quick-Connect Series
Amphenol RF 106 Connectors Description Developed in the late 1940 s as a miniature version of the Type C connector, stands for Bayonet Neill Concelman and is named after Amphenol engineer Carl Concelman.
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
Standard Flange Mount Termination Connector Miniature Flange Mount Termination Field Replaceable Flange Mount Connector Field Replaceable Connector End Index... Page (Features & Benefits)... 67 Field Replaceable...
COAX/SIGNAL HYBRID MICRO-D CONNECTORS Omnetics high reliability Micro-D connectors are available with mixed coax/signal contact layouts. The number of coax and signal contacts may be specified to provide
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 340.34 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
COXICON Series Mobile Phone Switching Coax Connectors Product Facts ble to switch RF signal from internal to external antenna SMD component for standard pick & place Up to 2.4 GHz Up to 30,000 life cycles
INTERCONNECT SOLUTIONS FOR RUGGEDIZED COMMUNICATIONS GPS Antenna Gooseneck Adapter TNC Waterproof Cable Assembly Communication radios often carry critical public safety information and must operate reliably
Connection Systems High Density Printed Circuit (HDPC) Connectors Connection Systems High Density HDPC Connectors Get connected with our expanding family of high quality connectors Delphi Connection Systems
Waveguide Adapters General Information DC - 26.5 GHz High Performance 1.15 Typical VSWR Male or Female Connectors available Choke Flange Types available -65 o C to +125 o C Operating Temperature Midwest
RF Connector Solutions C o n n e c t i n g I n n o v a t i o n t o A p p l i c a t i o n Winchester Electronics was established in 1941 and is today a global leader in the design, development, and deployment
SHIELDED COAXIAL CONTACT These contacts are required for high frequency interconnection. High speed Coax contacts within a connector provide the shielding protection in order to eliminate interferences
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors
Between Series Adapters Between Series Coaxial Transmission Line Adapters provide convenient transitions between popular series coaxial connectors. The adapter design provides a minimum length consistent
BNC, N, TNC Connectors ONLINE CATALOG AEP BNC, N, and TNC series connectors are specifically designed for use with miniature flexible and semi-rigid cable. They are available with goldplated or nickel-plated
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
RJF TV Ethernet connection system for harsh environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
s and s Size #23 Crimp s Size #23 Crimp s Standard size #23 contacts accept #22 to #28 AWG wire. Choose "small bore" versions for #26 to #30 AWG wire. For thermocouple applications, specify alumel or chromel
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series Amphenol Content Page Remarks / Safety classification IP Codes C 09 A C 09 B Circular connectors with metal screw coupling
HMCC SERIES Features: Low Profile Mated Height: (2.4mm) Ultra small PCB profile and surface area High Frequency Performance to 6 GHz Highly Shielded, Ultra-fine Coaxial Cable Three different sizes available
Coaxial Line Stretchers 3 These coaxial line stretchers maintain an impedance of 50ø while changing the length of the coaxial tube and adjusting the phase. One type is locked after the adjustment and another
Ethernet connection system for harsh environment ROHS COMPLIANT N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 50 OHM COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
66 Amphenol Board Level Interconnect products SMASH The high density interconnect system for harsh environment applications The SMASH connector offers extremely high robustness where signal integrity is
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
Coaxial Line Stretchers These coaxial line stretchers maintain an impedance of 50ø while changing the length of the coaxial tube and adjusting the phase. One type is locked after the adjustment and another
Cinch is proud to introduce our new RF coax connector line. Cinch introduces a full-line of RF/Coax connectors to meet the exacting requirements of today's designs where high frequency and low impedance
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
MAXIMUM SOLUTIONS Mill-Max Offers New SuperSpeed USB 3.0 Connectors Mill-Max has expanded its USB family to include four new USB 3.0 connectors. USB 3.0, SuperSpeed USB, provides a 10 X faster data transfer
coaxial connectors are reliable screw-on connectors with high degree of protectionand excellent intermodulation. Due to their mechanical stability and weather resistance connectors are suitable for outdoor
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
PCb Cable mount twinax ConneCtorS technical CharaCteriStiCS SPeCiFiCationS temperature rating: -55 C to + 125 C Corrosion: MIL-STD-202 Method 101, Test Condition B Shock: MIL-STD-202 Method 213, Test Condition
INCH-POUND MS27613G 7 August 2015 SUPERSEDING MS27613F 14 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECEPTACLE, PANEL MOUNT, FIREWALL SERIES Inactive for new design after 14 November
58 Interconnect products SMASH Advanced SEM E modular connector The SMASH connector offers extremely high robustness where signal integrity is required. Based on an aluminium shell with 1, 2 or 3 bays,
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight
Cable Assemblies Amphenol Connex offers a full line of pre-assembled, fixed-length cable assemblies. Fixed length assemblies are for use in a variety of commercial and industrial applications that require
Connectors - up to 280 Amps 2 Pole Wires sizes from #12 (3.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB series. The 3 pole adds an additional position for power or grounding.
Table of Contents Corning Gilbert Inc. Microwave Push-on Interconnects 1 TABLE OF CONTENTS General Information II Who We Are III Custom Designs IV Reference Guide GPO Products 2 GPO Specifications 3 Blindmate
Hand Crimping Tool and Cable Preparation Kit 59981-1 Instruction Sheet 408-6788 23 AUG 13 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
High Density Low Profile Connectors High density contact arrangement Light weight Low profile mated height Surface mount termination technology Miniature hyperboloid socket contacts Interfacial seal Polarized
WLAN 9100 Series External Antenna and Accessories Guide Table of Contents Introduction... 1 Benefits... 1 Glossary of Common Antenna Terminology... 2 WLAN 9100 External Antenna and Accessories... 3 Antenna:...
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
Subminiature, LAN Modular Jack Connectors TMR-5M Series Features.Fast Ethernet Support Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for,-3,6
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
Rosenberger RFlex Cables PERFORMANCE AND VALUE FOR YOUR DAY-TO-DAY TEST APPLICATIONS. Features and Benefits Microwave test cable performance at a fraction of the cost Excellent performance over a broad
ULTIMATE SNAP-N-SEAL F Series Compression Connectors Thomas & Betts introduces the Ultimate Snap-N-Seal Compression Connector, the newest addition to the Snap-N-Seal system. Look for the classic design
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
Elma Bustronic VPX Test Extender User Manual Elma Bustronic used creative engineering to solve a major problem in developing the VPX Extender Board - the lack of a right angle receptacle for VPX in the
WiFi Interface Identifier from Today s wireless market has exposed us to many new, and some familiar connectors. The wide range of antennas, access points, routers, WLAN s, cellular devices, PCMCIA cards,
FIRE CHNNEL D-SU COnneCtOr SerieS 150 Ohm High Speed Quadrax Connectors FETURES Standard keyed and non-keyed insert arrangements: 2, 4, 6, 8 way; hybrid options available Offered with 150 Ω impedance Data
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
EMC Test Chamber Solutions RF Cable Assemblies and Connectors RF CABLE ASSEMBLY AND CONNECTOR SOLUTONS FOR EMC MMUNTY AND EMSSON COMPLANCE TESTNG E X T N T R A T E D E P T H --> POWER LEVEL: -40.00 dbm
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 02 2006 Specification for F Port, Female, Indoor NOTICE The Society of Cable Telecommunications Engineers (SCTE)
INDUSTRIAL MINI I/O CONNECTOR FIELD INSTALLABLE Industrial Mini I/O Field Installable TE s Industrial Mini I/O connector provides innovative and timesaving wire-termination alongside serving as a space
38999 series III Bulkhead Feed-throughs Connectors and interconnect systems for harsh environments The company designs, manufactures and markets high performance interconnect solutions for severe environments
Installation Guide for the 9 dbi Omni-directional Antenna ANT2409 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 201-11248-01 April 2008 2008 by NETGEAR, Inc. All rights reserved. Trademarks