EROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS

Size: px
Start display at page:

Download "EROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS"

Transcription

1 MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M SPECIALTY COPPER ALLOYS FOR THE AEROSPACE INDUSTRY EROSPACE LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS

2 NBM s corporate headquarters and main distribution center was founded in 1983, and is located in Houston, Texas. We have experienced tremendous growth over the past 20 years and we have recently commenced construction of an additional 52,000 square foot warehouse (to be complete in August 2007), which will give us a total of 150,000 sq ft. We will also be adding new processing and cutting facilities to this location. Our foundry in Lorain, Ohio is one of the top producing continuous cast foundries in the Unites States. This facility utilizes both vertical and horizontal casting processes to manufacture our broad product line of continuous cast bronzes. In the summer of 2007 we will commence building a new state of the art foundry, whereby we will add a significant amount of additional capacity and introduce our own in-house heat treatment and quenching facilities. This new foundry will be built to meet future requirements for high precision casting applications. We also rough machine, warehouse, and ship material to our customers from this location. As a leading manufacturer and master distributor, our well established relationships with partnering mills around the world allows us to procure and hold one of the largest and most diverse ranges of brass, bronze and copper alloys in the USA today. Our inventories were built and designed with our customers in mind. It is an ongoing conscious effort on our part to understand your industry and applications, and to assure that we are able to deliver, not just one product, but the family of alloys that are applicable to what you manufacture. In the first quarter of 2007 NBM successfully implemented a new Enterprise Resource Planning system (Stratix by Invera Corp). The new system provides us with real-time inventory management, full traceability of all our product, material test reports delivered with every shipment, and more efficient work flows from sales quotations to production, through to shipment deliveries. In short, we have revamped our business processes to better suit our customer s needs, and draw the framework for future endeavors. We specialize in the manufacturing and distribution of brass, bronze, and copper alloys with a focus on specialty product lines for a large cross section of industries. Currently we supply more than one hundred and six different copper alloys from stock and others can be made to order to meet your full and exact requirements.

3 National Bronze & Metals, Inc. (NBM) has brought together a range of copper alloys, specifically for aerospace applications so as to provide you with one source to turn to for your ongoing requirements. This family of copper alloys is used for a wide variety of applications, such as bearings and bushings in landing gears & cargo doors, wheel and brake components, wing and tail actuators, hydraulic pump components, pylons and many other high demanding applications where heavy loads, corrosion, and abrasion are issues of concern. You will find that we have the right copper alloys that you and the entire aerospace industry demands ready for immediate shipment to anywhere in the United States or across the world. We are proud to be an ISO certified company and have maintained our certification since 1999.

4 C17200 (AMS 4533, 4534, 4535, 4650, 4651, QQ-C-530) Beryllium Copper, and plates This copper alloy can have the highest mechanical properties of all copper alloys. This alloy also has excellent bearing qualities with extremely high compressive strength for high loading applications. It also has excellent abrasion and corrosion resistant properties, plus outstanding cryogenic characteristics (for space applications). C63000 (AMS 4640) Available in solid bars and plates A high strength, tough nickel aluminum bronze used where high mechanical properties are required. This alloy is a heat treatable aluminum bronze containing 5% nickel, that provides excellent bearing properties with good corrosion resistance. It is used extensively for aircraft landing gear bushings, bearings, and other military and aircraft components. C63020 (AMS 4590) Available in solid bars A special heat treatment process improves the mechanical properties beyond the range of commercial aluminum bronzes. This alloy is an extra high strength version of nickel aluminum bronze. It is used where parts require extra high strength and hardness with some ductility and toughness. Typical applications include military aircraft bushings involving heavy loads, abrasion and high deformation. The extra high strength characteristics provide extreme wear resistance for extreme loads, abrasive wear, and high impact landings (such as aircraft carrier landings). C64200 (AMS 4631, 4634) Silicon Aluminum Bronze Available in solid bars This silicon aluminum bronze combines the self lubricity of the silicon with the higher mechanical properties of aluminum bronze and is sometimes used in place of C63000 where specifications permit a lower strength material offset by its lubricity. Typical applications involve valve stems, gears, marine and pole line hardware, wing pylons, bolts, nuts, bushings and valve body components. C65620 (AMS 4616) Silicon Bronze Available in solid bars A special high strength silicon bronze; the additional iron content provides added strength in conjunction with the self lubricity of the silicon for excellent bearing and load properties. Easily machined into ball bearing cage assemblies!

5 C67300 (SAE J463, J461) Manganese Bronze This is a high strength manganese bronze with typically good bearing and self lubricity properties. This alloy maintains high impact resistance with good machinability making it well suited for clutch bearings, shaft bushings, sleeve bearings, thrust bearings, pump parts, drive shafts, bearing pins, wear plates, gears and cams. Resists squashing out under high loads and extreme wear applications. C86300 (ASTM B-505, B-271, AMS 4862) Manganese Bronze This cast manganese bronze is typically supplied in continuous cast or centrifugally cast bars and tubes for high load gear and bearing applications. This material achieves over 110 ksi tensile strength and an elongation of 14% minimum. It is excellent in applications requiring high strength metal to metal wear. C93700 (ASTM B-505, B271, AMS 4842) High Leaded Tin Bronze " " This is a high leaded tin bronze used for high speed and heavy pressure applications where corrosion resistance is necessary. The increased lead content provides added self lubricity within the family of tin bronzes. Excellent machinability at 80%! C95400 (ASTM B-505, B-271, AMS 4871, 4873) Aluminum Bronze "9C" and wear plates This is the most popular aluminum bronze and is used in a lot of different industrial applications. This extra tough bearing material is used for heavy loads with good resistance to impact and corrosion. Aluminum bronze has a lot of good properties and is the most readily available high strength bearing material. C95510 (AMS 4880) Continuous & Centrifugal Cast C95520 (AMS 4881) Centrifugal Cast These are the most popular landing gear bushing materials specified today along with C63000 material. These continuous / centrifugal cast alloys are heat treated alloys and exhibit high mechanical strengths which meet the properties of C63000 (AMS 4640). In many cases C95510 (AMS 4880) can be substituted for C63000 with the advantage of the material being available in tube form which provides economic cost savings for you, the customer. UZ19AL6 Aircraft Bronze This is a European high strength bearing bronze which is utilized by Airbus for landing gear components. SAE 841 (ASTM B-438, B-4831) Sintered Bronze This oil impregnated bronze is one of the finest powder metal bearings on the market. The sintering process provides superior strength, reduced coefficient of friction, and uniform oil coating of the mating shaft during operation. Material is available in solid, cored, and rectangular bars from stock!

6

BRONZE. TECHNICAL INFORMATION 932 (SAE 660) Bearing Bronze Aluminum Bronze

BRONZE. TECHNICAL INFORMATION 932 (SAE 660) Bearing Bronze Aluminum Bronze BRONZE TECHNICAL INFORMATION 932 (SAE 660) Bearing Bronze... 13-2 954 Aluminum Bronze... 13-2 SIZE CHARTS 932 Rounds... 13-3 954 Rounds... 13-3 959 Rounds... 13-4 932 Flats... 13-5 954 Flats and Squares...13-6

More information

CAST IRON 2P GREY IRON. C Mn Si Ni Cr Mo P S Al Cu. Typical Analysis (Ave. values %)

CAST IRON 2P GREY IRON. C Mn Si Ni Cr Mo P S Al Cu. Typical Analysis (Ave. values %) CAST IRON 2P GREY IRON C Mn Si Ni Cr Mo P S Al Cu 3.25 0.55 2.30 0.08 0.4 0.1 0.1 0.8 0.1 0.7 1830-T260 1452-Grade 17 1691-GG35 FC-25 2P is normally called for when exceptionally good wearing qualities

More information

IBC Advanced Alloys - Copper Alloys

IBC Advanced Alloys - Copper Alloys Product Data Sheet - C17200 C17200 is manufactured to provide a combination of high strength and hardness properties coupled with superior thermal properties. This range of properties makes C17200 the

More information

General Engineering Applications

General Engineering Applications Page 1 of 5 MEEHANITE SELECTION GUIDE Presented by Lodi Iron Works, Inc 1-888-368-5395 General Engineering Applications Meehanite Flake Graphite Types -Type AQ is a wear and abrasion resisting iron that

More information

Lecture Notes on manufacturing Process. Engineering Material

Lecture Notes on manufacturing Process. Engineering Material Engineering Material Ferrous material; A general classification of engineering materials is shown in Figure 1.8. Engineering material can be broadly classified as Metallic and Non-Metallic materials. The

More information

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25 TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140

More information

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended

More information

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS INSTALLATION AND OPERATION MANUAL FOR WORM GEAR ACTUATORS Thank you for purchasing our SBWG Worm Gear Actuator. Before installing or operating actuator, please carefully read this manual. The contents

More information

Master Distributor, Brass Mill, Bronze Foundry!

Master Distributor, Brass Mill, Bronze Foundry! National Bronze and Metals Technical Training Seminars 1. Continuous Cast Foundry A. Horizontal Cast B. Vertical Cast 2. Centrifugal Castings A. Horizontal Cast B. Vertical Cast 3. Brass/Copper Extrusion

More information

DIE CASTING ALLOYS. KenWalt Die Casting Company - All Rights Reserved

DIE CASTING ALLOYS. KenWalt Die Casting Company - All Rights Reserved DIE CASTING ALLOYS A wide variety of die casting alloys, a mixture of two or more metals, are available with a comprehensive range of physical and mechanical properties for almost any application a designer

More information

SAND CAST CHILL CAST LM4 - TF

SAND CAST CHILL CAST LM4 - TF 1 This alloy conforms with British Standards 1490 and is similar to the obsolete specifications BS.L79 and D.T.D 424A. Castings may be in the cast (M) of fully heat treated (TF) conditions. CHEMICAL COMPOSITION

More information

Mechanical properties can be permanently altered by either thermal or mechanical treatment. Those properties include:

Mechanical properties can be permanently altered by either thermal or mechanical treatment. Those properties include: Training Objective After watching the program and reviewing this printed material, the viewer will become familiar with further aspects of tool design by exploring the materials used in toolmaking. Tool

More information

SECTION 710 GUARDRAIL MATERIALS

SECTION 710 GUARDRAIL MATERIALS 710.08 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SECTION 710 GUARDRAIL MATERIALS 710.01 General. Metal beam

More information

INTRODUCTION INTRODUCTION TO TYC 3 ROLLER CHAIN PARTS 5 CHAIN TYPES & FEATURES 7

INTRODUCTION INTRODUCTION TO TYC 3 ROLLER CHAIN PARTS 5 CHAIN TYPES & FEATURES 7 INTRODUCTION ANSI STANDARD ROLLER CHAINS 2 10 CONTENTS DOUBLE - PITCH ROLLER CHAINS STANDARD ROLLER CHAINS AGRICULTURAL CHAINS LEAF CHAINS SPECIAL CHAINS CHAIN PARTS 31 37 43 49 53 74 1 2 8/2/05, 1:42

More information

Innovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves

Innovative Products For Unique Applications. A Tradition of Excellence. Creative Engineering for Fluid Systems. Earthquake Proof Valves A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry Pratt Company became a trusted name in the flow control industry, setting the

More information

Materials in Mechanical Design. Materials in Mechanical Design. Classes of Material

Materials in Mechanical Design. Materials in Mechanical Design. Classes of Material Materials in Mechanical Design Materials taken from Chapter 2 of Materials in Mechanical Design The designer must specify the required materials for each part of a mechanical device. Physical properties

More information

Pos-Z-Cam. Milfact: Milfact: FEATURES: Make long-term die reliability a reality!

Pos-Z-Cam. Milfact: Milfact: FEATURES: Make long-term die reliability a reality! 2PIERCE POSITIVE RETURN CAM Pos-Z-Cam Make long-term die reliability a reality! The Milfab Pos-Z-Cam is a powerful compact positive return cam designed to maximize die runtime. PUNCH BODY GREASE FITTING

More information

Pneumatic Actuators. Apollo Rack & Pinion BENEFITS FEATURES

Pneumatic Actuators. Apollo Rack & Pinion BENEFITS FEATURES Apollo Rack & Pinion Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide outstanding service life. Pneumatic Actuators Apollo

More information

VIKING HYDRAULIC GEAR PUMPS & MOTORS

VIKING HYDRAULIC GEAR PUMPS & MOTORS SERIES GP-04, -05, -07, -10, -14 Section 341.4 Page 341.4.1 Issue B OPERATING RANGE: GP Pumps (Cast Iron, Lip-Sealed) Displacements No. 24 Flow Range GPM 0.06 to 190 M 3 /Hr 0.011 to 43 Pressure PSI to

More information

EndMills For Hardened Steel

EndMills For Hardened Steel For Hardened Hi-Performance Flute 45 For Tough Features : - Manufactured from premium sub micron grain carbide. - Increased core diameter for added strength. - Use for light finishing cuts - CG coated

More information

THE CAPABILITIES OF ZINC DIE CASTING

THE CAPABILITIES OF ZINC DIE CASTING THE CAPABILITIES OF ZINC DIE CASTING Presented by: Ryan Winter (Manager Customer Engineering Services) Eastern Alloys, Inc. Eastern Alloys, Inc. Introduction to ZINC Introduction to Zinc Zinc is the 4th

More information

BRUSH PERFORMANCE ALLOYS TOUGH BEARING MATERIAL FOR PROBLEMATIC BEARING APPLICATIONS

BRUSH PERFORMANCE ALLOYS TOUGH BEARING MATERIAL FOR PROBLEMATIC BEARING APPLICATIONS BRUSH PERFORMANCE ALLOYS TOUGH BEARING MATERIAL FOR PROBLEMATIC BEARING APPLICATIONS PROBLEMATIC BEARING APPLICATIONS PLAIN BEARING Problem: Adhesive wear, abrasive wear, pin deflection, non-ideal or edge

More information

GM POWERGLIDE PERFORMANCE PARTS

GM POWERGLIDE PERFORMANCE PARTS Powerglide Super Pump Product #743400PH Superior Transbrake operation at low rpm. * Billet Aluminum Pump Body. * 20% lighter than the Stock Pump. (11.5 lbs. versus 14.4 lbs.) * Positive Stop Bushing area

More information

PLAIN BEARING BUSHING DIE SETS

PLAIN BEARING BUSHING DIE SETS www.danly.com TRUSTED SOLUTIONS AND INNOVATION PLAIN BEARING BUSHING DIE SETS Quality, performance, economy Precise fit Ease of assembly www.danly.com PLAIN BEARING BUSHING DIE SETS Service We Deliver

More information

COPPER-BASED ALLOY SOLUTIONS. FULL PRODUCT RANGE WORLDWIDE AVAILABILITY EXPERT ADVICE.

COPPER-BASED ALLOY SOLUTIONS.  FULL PRODUCT RANGE WORLDWIDE AVAILABILITY EXPERT ADVICE. COMMITTED TO INNOVATIVE PRODUCTS AND SUPERIOR CUSTOMER SERVICE FOR OVER 90 YEARS. Ampco Metal is an integrated metal producer, offering under the Ampco and Ampcoloy brands the widest range of premium speciality

More information

VAL-MATIC VALVE AND MANUFACTURING CORP. 905 RIVERSIDE DRIVE, ELMHURST, IL TEL. (630) FAX.

VAL-MATIC VALVE AND MANUFACTURING CORP. 905 RIVERSIDE DRIVE, ELMHURST, IL TEL. (630) FAX. Manual Actuators VAL-MATIC VALVE AND MANUFACTURING CORP. 905 RIVERSIDE DRIVE, ELMHURST, IL 60126 TEL. (630) 941-7600 FAX. (630) 941-8042 www.valmatic.com MANUAL ACTUATORS INTRODUCTION Butterfly and ball

More information

DieMax XL TM Maximum Life Springs. Meets ISO Standards

DieMax XL TM Maximum Life Springs. Meets ISO Standards DieMax XL TM Maximum Life Springs Meets ISO Standards DieMax XL TM Maximum Life Springs SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON IEM is a leading manufacturer of die and mold components supplied

More information

VERSATILE, ROBUST, MODULAR BUILDING BLOCK SYSTEM DO IT YOURSELF, OR ORDER COMPLETE FROM US COMPATIBLE WITH OTHER FRAMING SYSTEMS

VERSATILE, ROBUST, MODULAR BUILDING BLOCK SYSTEM DO IT YOURSELF, OR ORDER COMPLETE FROM US COMPATIBLE WITH OTHER FRAMING SYSTEMS VERSATILE, ROBUST, MODULAR BUILDING BLOCK SYSTEM DO IT YOURSELF, OR ORDER COMPLETE FROM US COMPATIBLE WITH OTHER FRAMING SYSTEMS ASK US ABOUT OUR DESIGN AID SOFTWARE FIXTURES RACKS & CARTS TABLES WORKSTATIONS

More information

Sulzer Pumps Striving to Serve You Better. A Reputation for Excellence

Sulzer Pumps Striving to Serve You Better. A Reputation for Excellence ZPP Double Suction Pumps Sulzer Pumps Striving to Serve You Better Sulzer Pumps is a leading global supplier of reliable products and innovative pumping solutions for end users. Our active research and

More information

LOBEE VERTICAL SUMP PUMP LOBEE MODEL S/SH AND SA/SHA SUMP PUMPS INSTALLATION AND OPERATING INSTRUCTIONS

LOBEE VERTICAL SUMP PUMP LOBEE MODEL S/SH AND SA/SHA SUMP PUMPS INSTALLATION AND OPERATING INSTRUCTIONS SPT3/2010 LOBEE VERTICAL SUMP PUMP LOBEE MODEL S/SH AND SA/SHA SUMP PUMPS INSTALLATION AND OPERATING INSTRUCTIONS These instructions are important - please read them thoroughly before installing your Lobee

More information

INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES

INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES GREAT PRODUCTS ARE ONLY PART OF OUR SUCCESS. YOU SHOULD MEET OUR PEOPLE. From the machinist with over 20 years experience

More information

4. GRINDING MACHINE. 4.1 Introduction. 4.2 Types of grinding machines Rough grinding machines Precision grinding machines

4. GRINDING MACHINE. 4.1 Introduction. 4.2 Types of grinding machines Rough grinding machines Precision grinding machines 4.1 Introduction 4. GRINDING MACHINE Grinding is a metal cutting operation like any other process of machining removing metal in comparatively smaller volume. The cutting tool used is an abrasive wheel

More information

BULLETIN 74.00-2 DECEMBER 2011. DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS

BULLETIN 74.00-2 DECEMBER 2011. DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS BULLETIN 74.00-2 DECEMBER 2011 DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22

More information

Advanced Surface Repair Capabilities

Advanced Surface Repair Capabilities m Advanced Surface Repair Capabilities 1 m Moog is a global designer, manufacturer and integrator of precision motion control products and systems. Over the past 60 years, we have developed a reputation

More information

MANHOLE CASTING REFERENCE GUIDE

MANHOLE CASTING REFERENCE GUIDE MANHOLE CASTING REFERENCE GUIDE TABLE OF CONTENTS Materials...... 2 Load Bearing... 3 Key Dimensions of Round Frame and Cover... 3 Key Dimensions of Inlet Frame and Grate... 4 Frame Designs... 5 Grate

More information

Selection of Materials Definition of Testing Methods

Selection of Materials Definition of Testing Methods Selection of Materials Definition of Testing Methods Robert O Rourke is a Product Engineer and Metallurgist at Dura-Bar, with experience in production, quality management and applications research. He

More information

Pneumatic Rack & Pinion Actuator

Pneumatic Rack & Pinion Actuator Pneumatic Rack & Pinion Actuator 4120 NE Columbia Blvd. - Portland, Oregon USA 97211 Phone: 503-287-8383 - Fax: 503-281-9677 - www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds

More information

Discover the Nycast Advantage of Cast Nylons Limited. CAST NYLON STOCK SHAPES and CUSTOM CASTINGS

Discover the Nycast Advantage of Cast Nylons Limited. CAST NYLON STOCK SHAPES and CUSTOM CASTINGS Discover the Nycast Advantage of Cast Nylons Limited CAST NYLON STOCK SHAPES and CUSTOM CASTINGS Delivering your product advantage for more than 25 years. Cast Nylons Limited (CNL) is the premier producer

More information

HYDRAULIC LIFT TABLE CART 2200-LB.

HYDRAULIC LIFT TABLE CART 2200-LB. HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

Section 4: NiResist Iron

Section 4: NiResist Iron Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar

More information

PINS & BUSHINGS INCH

PINS & BUSHINGS INCH PINS & BUSHINGS INCH 1 PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die and mold components supplied globally to the parts forming industry.

More information

Safety and Operation Rx 30, 50, 70

Safety and Operation Rx 30, 50, 70 Safety and Operation Rx 30, 50, 70 Self Reversing Tapping Attachments Safety and Operation Rx 30, 50, 70 Self Reversing Tapping Attachments Safety and Operation Rx 30, 50, 70 Self Reversing Tapping Attachments

More information

Dow Corning Lubricants

Dow Corning Lubricants Lesson DC2010 Dow Corning Lubricants SECTION TEN ASSEMBLY PASTES INDEX Molykote G-n Plus.....2 Molykote G Rapid Plus.3 Molykote P40 4 Questions...5 Structured Training Plan DC2000 Series This lesson is

More information

Foundry Sand: A Recipe for Beneficial Use

Foundry Sand: A Recipe for Beneficial Use Foundry Sand: A Recipe for Beneficial Use Mike Lenahan, Resource Recovery Corp. Dan Oman, RMT, Inc. Midwest Industrial By-Products Beneficial Use Summit August 19-20, 2002 Chicago, IL Outline! Profile

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

Core Drilling and Mining

Core Drilling and Mining Core Drilling Pumps Core Drilling and Mining The durability of the FMC Technologies Bean piston pumps is unsurpassed within the vertical drilling markets. Designed for continuous duty applications, the

More information

M Z M Z 2008 PRODUCT CATALOGUE. Material Stocked at Our Edmonton Warehouse &INDUSTRIAL SUPPLY LTD. Custom Manufacturing SERVICE SELECTION SATISFACTION

M Z M Z 2008 PRODUCT CATALOGUE. Material Stocked at Our Edmonton Warehouse &INDUSTRIAL SUPPLY LTD. Custom Manufacturing SERVICE SELECTION SATISFACTION 0 PRODUCT CATALOGUE Material Stocked at Our Edmonton Warehouse Finished A B, BM A L, LM A B (0SS) A BM (SS) Heavy Hex Nuts A H A HM A Gr. & Gr. L A LM A & M Plated & Bare RediRod Plated s Bare s Cap Screws

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

Horizontal Jet Pumps 1/3-1-1/2 HP

Horizontal Jet Pumps 1/3-1-1/2 HP Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The

More information

April 26 th, Page 1. A Hitachi Group Company. Copyright 2016 All Rights Reserved

April 26 th, Page 1. A Hitachi Group Company. Copyright 2016 All Rights Reserved April 26 th, 2016 Page 1 About HTMF Key Information: AS 9100 & ISO 9001 Certified Primary NAICS Codes: 332710, 332999, 333511 Cage Code: 79N81 D&B: 969818025 Capability Statement: HI-TECH Machine & Fabrication

More information

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide: LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have

More information

AXIAL PISTON PUMPS. THEORY of OPERATION DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q

AXIAL PISTON PUMPS. THEORY of OPERATION DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q DELTA^Q THEORY of OPERATION AXIAL PISTON PUMPS Plant Location and Mailing Address 10827 Tower Oaks Blvd. Houston, TX 77070 Email: info@deltaq.com Website: www.deltaq.com Phone: (281) 807-1840 or (800) 650-3110

More information

SECTION 1 COMPANY OVERVIEW

SECTION 1 COMPANY OVERVIEW problems Selection of the problem 29 Section 4: Problem Formulation Cognitive Map of the problem 34 Theoretical Framework 35 Second Cognitive Map of the problem 45 Diagnostic formulation 46 Section 5:

More information

D I S T R I B U T E D V A L V E S. TBV Series 21/18 Cryogenic Flanged Ball Valve TBV

D I S T R I B U T E D V A L V E S. TBV Series 21/18 Cryogenic Flanged Ball Valve TBV TM TBV Series 21/18 Cryogenic Flanged Ball Valve The TBV Series 21/18 Two-Piece, Standard or Full Port, Flanged, Cryogenic Ball Valve is specifically designed for cryogenic applications. The Series 21/18

More information

Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector

Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector 1 2 About us Saudi Maintenance and Supply Chain Management Company (SMSCMC) is a top-tier integrated supply chain

More information

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment

More information

Ball bearings or Sleeve bearings?

Ball bearings or Sleeve bearings? Press News Bearing Systems for Fans: Ball bearings or Sleeve bearings? Like all rotating machine parts, the rotors of equipment fans need to be provided with bearings. Popular solutions today are either

More information

42 and Larger Cam-Centric Plug Valve

42 and Larger Cam-Centric Plug Valve Manual No. CCPV-OM4 42 and Larger Cam-Centric Plug Valve Operation, Maintenance and Installation Manual INTRODUCTION...1 RECEIVING AND STORAGE...1 DESCRIPTION OF OPERATION...1 VALVE CONSTRUCTION...2 INSTALLATION...3

More information

Water Pump Prices subject to change. Cadillac V-16 Generator Coupler to Water Pump Bolt. Cadillac V-12 & V-16 Water Pump Shaft

Water Pump Prices subject to change. Cadillac V-16 Generator Coupler to Water Pump Bolt. Cadillac V-12 & V-16 Water Pump Shaft Cadillac V-16 Generator Coupler to Water Pump Bolt $7.00 CAD-0158 1/4-20 Bolt connecting the generator coupling shaft to the generator and water pump on 1930-1931 Cadillac V- 16. Cadillac part number 892363.

More information

petroleum technologies

petroleum technologies petroleum technologies TABLE OF CONTENTS BASICS OF OIL ANALYSIS p. 4-5 Introduction p. 4 Trend Oil Analysis p. 4 Engine, Transmission & Hydraulic Systems p. 5 Oil Analysis Measure p. 5 Why Oil Analysis?

More information

American Society of Mechanical Engineers

American Society of Mechanical Engineers American Society of Mechanical Engineers ASTM A53 /ASME SA53 Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A105/ASME SA105 Forgings, Carbon Steel, for Piping Components ASTM A106/ASME

More information

AA SERIES. Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI

AA SERIES. Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI AA SERIES Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI Parts List 1 1 /2", 2" AND 2 1 /2" BORE SIZE 3 27 13 21 24 25 1 71 33 16B 30 1,2 Head and Cap Accurately machined from aluminum

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

GROUND SUPPORT EQUIPMENT

GROUND SUPPORT EQUIPMENT GROUND SUPPORT EQUIPMENT Contents 04 Engine Access Stand 08 Wide Body Aircraft Access Stand 10 Narrow Body Aircraft Access Stand 12 Main Landing Gear Access Stand 14 Cabin Access Seat Stand 16 B4 Maintenance

More information

Types 410, 420, 425 Mod, and 440A

Types 410, 420, 425 Mod, and 440A s 410, 420, 425 Mod, and 440A GENERAL PROPERTIES s 410, 420, 425 Modified, and 440A (see composition on Page 2) are hardenable, straight-chromium stainless steels which combine superior wear resistance

More information

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

More information

Website: Phone: (847) Fax: (847) PRODUCT CATALOG

Website:    Phone: (847) Fax: (847) PRODUCT CATALOG Website: www.wrdevices.com E-Mail: devices@comcast.net Phone: (847) 625-8500 Fax: (847) 625-8100 PRODUCT CATALOG Cheeper DEFECT CARD HOLDER 22-2716 NOTE: LOCATE HOLES ON CAR BODY ON A HORIZONTAL LINE.

More information

Plastic Injection Molding

Plastic Injection Molding Training Objective After watching this video and reviewing the printed material, the student/trainee will understand the principles and physical operations of the plastic injection molding process. An

More information

THE POWER OF STAINLESS THE NEW LEADER IN VERTICAL & SUBMERSIBLE TURBINE PUMPS

THE POWER OF STAINLESS THE NEW LEADER IN VERTICAL & SUBMERSIBLE TURBINE PUMPS W W W. H Y D RO F L O P U M P S. C O M THE POWER OF STAINLESS THE NEW LEADER IN VERTICAL & SUBMERSIBLE TURBINE PUMPS EXCLUSIVE FEATURES STANDARD STAINLESS IMPELLERS ALL INVESTMENT CAST STAINLESS PUMPS

More information

727 PERFORMANCE PARTS

727 PERFORMANCE PARTS 727 Full Metal Jacket Drum Kit Product #K123900AS The TCS 727 "Full Metal Jacket" Steel Sleeved Aluminum Drum Is here!! Ideal for those that use their vehicles on both the Street and Strip. Only 5.5 lbs

More information

Mueller B-101 and A-3 Drilling and Tapping Machines

Mueller B-101 and A-3 Drilling and Tapping Machines TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology

More information

ATI 410 /ATI 420 /ATI 425 Mod / ATI 440A /ATI 440C

ATI 410 /ATI 420 /ATI 425 Mod / ATI 440A /ATI 440C ATI 410 /ATI 420 /ATI 425 Mod / Stainless Steel: Martensitic (UNS S41000/S42000/xxxxx/S44002/S44004) GENERAL PROPERTIES ATI 410, ATI 420, ATI 425 Modified, and ATI 440A alloys (see composition on Page

More information

Confidence with the global standard in pressure relief devices

Confidence with the global standard in pressure relief devices QUALITROL LPRD Large pressure relief devices Confidence with the global standard in pressure relief devices Robust design and materials provide reliable protection and long life Widest array of options

More information

Stainless steel grade chart

Stainless steel grade chart Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

BLASTMASTER 6.0 CU. FT. C-SERIES ABRASIVE BLASTING POT

BLASTMASTER 6.0 CU. FT. C-SERIES ABRASIVE BLASTING POT BLASTMASTER 6.0 CU. FT. C-SERIES ABRASIVE BLASTING POT PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products

More information

FRICTION MATERIALS & BONDING SERVICES

FRICTION MATERIALS & BONDING SERVICES FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding

More information

Module 2- GEARS. Lecture 8 SPUR GEAR DESIGN

Module 2- GEARS. Lecture 8 SPUR GEAR DESIGN Module 2- GEARS Lecture 8 SPUR GEAR DESIGN Contents 8.1 Surface durability basic concepts 8.2 Surface failures 8.3 Buckingham contact stress equation 8.4 Contact stress AGMA procedure 8.5 Surface fatigue

More information

Why Lead Screws are the Best Fit for Many Linear Motion Applications - and How to Rightly Apply Them

Why Lead Screws are the Best Fit for Many Linear Motion Applications - and How to Rightly Apply Them Why Lead Screws are the Best Fit for Many Linear Motion Applications - and How to Rightly Apply Them Robert Lipsett, Engineering Manager, Thomson BSA Thomson Industries, Inc. San Jose, CA 800.882.8857

More information

ON-OFF FLOAT CONTROL VALVE

ON-OFF FLOAT CONTROL VALVE ON-OFF FLOAT CONTROL VALVE (4 and Smaller) /08 Schematics Opens when float reaches low level stop Closes when float reaches high level stop Low and High Level stop collars are adjustable P/L X Standard

More information

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines 40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

More information

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9 DIE ACCESSORIES CONTENTS page number Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller

More information

BULLETIN 70.00-1 OCTOBER 2012. DeZURIK ROTARY DIAPHRAGM ACTUATORS

BULLETIN 70.00-1 OCTOBER 2012. DeZURIK ROTARY DIAPHRAGM ACTUATORS BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:

More information

Advantages of Steel as a Structural Material

Advantages of Steel as a Structural Material CHAPTER Structural Steel Design LRFD Method INTRODUCTION TO STRUCTURAL STEEL DESIGN Third Edition A. J. Clark School of Engineering Department of Civil and Environmental Engineering Part II Structural

More information

Engr 270 AA -- Materials Science Experiment # 4 -- Hardness Testing of Materials

Engr 270 AA -- Materials Science Experiment # 4 -- Hardness Testing of Materials Engr 270 AA -- Materials Science Experiment # 4 -- Hardness Testing of Materials Purpose: This experiment aims to introduce the students to the Rockwell hardness testing and its relations to other mechanical

More information

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT 14 STEERING HANDLEBAR/FRONT WHEEL/FRONT 14 SERVICE INFORMATION... 14-2 TROUBLESHOOTING... 14-2 STEERING HANDLEBAR... 14-3 FRONT WHEEL... 14-5 HYDRAULIC BRAKE... 14-8 FRONT SHOCK ABSORBER... 14-16 FRONT

More information

NEWCO. Forged Steel Valves. Technical Data TC9308-4

NEWCO. Forged Steel Valves. Technical Data TC9308-4 NEWCO Forged Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

HOT ROLLED BLACK SHEETS

HOT ROLLED BLACK SHEETS PLATES & SHEETS CHATHAM STEEL CORPORATION 2 HOT ROLLED BLACK SHEETS COMMERCIAL QUALITY A-69 Size (In.) Nom. Thickness Weight Per Sheet GA x 48 x 96 (.9) 240.0 (Lbs.) x 48 x 20 00.0 x 48 x 44 60.0 x 48

More information

Traveling. water. screen. parts. service. rakes. bar racks

Traveling. water. screen. parts. service. rakes. bar racks Traveling water screen parts Traveling service water P.O. Box 760 Slaughter, LA 70777 Tele: 225-654-3900 Fax: 225-654-3966 email: sales@screeningsystems.com trash rakes Rebuilds bar racks screen parts

More information

Ball Valve. Selection Guide. 3-Piece Flanged Multi-Port Threaded Instrument Commercial V-Control Cryogenic

Ball Valve. Selection Guide. 3-Piece Flanged Multi-Port Threaded Instrument Commercial V-Control Cryogenic Ball Valve Selection Guide 3-Piece Flanged Multi-Port Threaded Instrument Commercial V-Control Cryogenic 3 Piece Ball Valves Triad Series Full Port ¼ through 4 Standard Port ¾ through 2 ½ Stainless Steel

More information

THE RIGHT PART THE FIRST TIME TURBO PARTS, LLC.

THE RIGHT PART THE FIRST TIME TURBO PARTS, LLC. THE RIGHT PART THE FIRST TIME TURBO PARTS, LLC. QUALITY MANUFACTURING INVENTORY GUARDIAN/VORTEX INSTALLATION ABOUT TPL ExcEllEncE in EnginEEring. ThE right part. ThE first TimE. ValVEs, components, and

More information

Distributed by: www.jameco.com 1-800-831- The content and copyrights of the attached material are the property of its owner. PIDG (Pre-Insulated Diamond Grip) Product Facts Pre-insulated terminal designed

More information

Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves

Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control

More information

The Truth About Actuator Life: Screw Drive Survival

The Truth About Actuator Life: Screw Drive Survival The Truth About Actuator Life: Screw Drive Survival By Tolomatic, Inc. About the Author: Tolomatic is a leading supplier of linear actuators, both electric and pneumatically driven. Tolomatic's expertise

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

Houston Plating & Coatings

Houston Plating & Coatings Houston Plating & Coatings Electroless Nickel SBN QPQ TM Teflon Coating Polyurethane Multi-Coat Epoxy System Dry Film Lubricant Phosphate and Oil Xylan Fluoropolymer Molybdenum Disulfide Houston Plating

More information

ATLAS RESISTANCE Pier Foundation Systems

ATLAS RESISTANCE Pier Foundation Systems ATLAS RESISTANCE Pier Foundation Systems Foundation Repair Systems for Civil Construction Applications: Residential, Commercial, Industrial Atlas Resistance Piers have been used to restore and/or stabilize

More information

Conductivity and Resistivity Values for Copper & Alloys

Conductivity and Resistivity Values for Copper & Alloys Conductivity and Resistivity Values for Copper & Alloys Material Conductivity Resistivity Reference Notes (% IACS) (Siemens/m) (Ohm-m) (See End Note) Copper and Copper Alloys by Copper Alloy Number Pure

More information