Direct solenoid and solenoid pilot operated valves

Transcription

1 Direct solenoid and solenoid pilot operated valves Individual mounting Series non plug-in plug-in Manifold mounting 35 non plug-in plug-in 100 onded spool Indicator light Manual operator Large piston assembly Encapsulated solenoid ir/spring return 45 External pilot supply port alanced poppet SERIES FETURES Unique patented MCSOLENOID for fastest possible response times. alanced poppet pilot valve for high flow, precise repeatability, and consistent operation. Large spool piston for maximum shifting force even at minimum operating pressure. ir/spring return for consistent shifting on single solenoid models. MC spool and bore combination for wiping away contamination, eliminating sticking, and use on non-lube service. Patented virtually burn-out proof C solenoid. Plug-in design of valves, bases, flow controls, and regulators for modular assembly and ease of maintenance. Optional low wattage DC solenoids down to 1.8 watts. Indicator lights in valve body or base and non-plug-in models available. Very high flow in a very compact package. 99 Consult Precautions page 364 before use, installation or service of MC Valves ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC 500

2 100% 100% WRRNTY 18 OF PRODUCTION TESTED 100% MONTHS SPOOL CONFIGURTIONS SGLE OPERTOR SGLE LET - DUL UST SHOWN WITH OPERTOR ENERGIZED DOULE OPERTOR SGLE LET - DUL UST SHOWN WITH OPERTOR ENERGIZED SGLE OPERTOR DUL LET - SGLE UST SHOWN WITH OPERTOR ENERGIZED DOULE OPERTOR DUL LET - SGLE UST SHOWN WITH OPERTOR ENERGIZED 3 POSITION CLOSED CENTER 3 POSITION OPEN CENTER 3 POSITION SGLE PRESSURE PRESSURE CENTER 3 POSITION DUL PRESSURE PRESSURE CENTER 100 Consult Precautions page 364 before use, installation or service of MC Valves

3 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Individual mounting Series - 1/8-1/4-3/ C v non plug-in OPERTIONL ENEFITS 1. alanced spool, immune to variations of pressure. 2. Short stroke with high flow. 3. The piston (booster) provides maximum shifting forces. 4. Powerful return force thanks to the combination of mechanical and air springs. 5. onded spool with minimum friction, shifting in a glass-like finished bore. 6. Wiping effect eliminates sticking. 7. Pilot valve with balanced poppet, high flow, short and consistent response times. 8. Long service life. HOW TO ORDER Port size Pilot air Single operator Double operator Closed center Open center Pressure center Valve less base Internal 1/8 NPTF External TM-DXXX-XXX 82---TM-DXXX-XXX 82--D-TM-DXXX-XXX TM-DXXX-XXX 82---TM-DXXX-XXX 82--D-TM-DXXX-XXX 82-E-000-TM-DXXX-XXX 82-E--TM-DXXX-XXX 82-E-D-TM-DXXX-XXX 82-F-000-TM-DXXX-XXX 82-F--TM-DXXX-XXX 82-F-D-TM-DXXX-XXX 82-G-000-TM-DXXX-XXX 82-G--TM-DXXX-XXX 82-G-D-TM-DXXX-XXX 45 Internal 82---TM-DXXX-XXX 82---TM-DXXX-XXX 82-E--TM-DXXX-XXX 82-F--TM-DXXX-XXX 82-G--TM-DXXX-XXX 1/4 NPTF External 82--D-TM-DXXX-XXX 82--D-TM-DXXX-XXX 82-E-D-TM-DXXX-XXX 82-F-D-TM-DXXX-XXX 82-G-D-TM-DXXX-XXX 3/8 NPTF Internal External 82--C-TM-DXXX-XXX 82--CD-TM-DXXX-XXX 82--C-TM-DXXX-XXX 82--CD-TM-DXXX-XXX 82-E-C-TM-DXXX-XXX 82-E-CD-TM-DXXX-XXX 82-F-C-TM-DXXX-XXX 82-F-CD-TM-DXXX-XXX 82-G-C-TM-DXXX-XXX 82-G-CD-TM-DXXX-XXX 700 SOLENOID OPERTOR D XX X- X XX * 900 XX Voltage X Wire length X Manual operator XX 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 361. OPTIONS TM-DXXX-XXX TM-DXXX-XXX - For dual pressure valves, replace by C, by D, E by M, F by L, G by H. (Requires sandwich regulator, see pressure regulator section.) - TP (Piped pilot exhaust) - For pilot exhaust out main exhaust, replace by E. lso, TM pilot body is replaced by TU pilot body. - Main exhaust cannot be restricted. vailable only on single pressure valves. 82-XX--TM-DXXX-XXX - Replace by for bottom ports (1/8 or 1/4 only) - Replace by C for side and bottom ports (1/8 or 1/4 only) J 18 (Flying leads) Connector Non-locking 2 Locking K KD J JD Electrical connection Square connector Square connector with light Rectangular connector Rectangular connector with light Flying leads Note : KD connector shown in photo. Consult Precautions page 364 before use, installation or service of MC Valves ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC 500

4 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% M O N T H S technical data Fluid : Pressure range : Pilot pressure : Lubrication : Filtration : Temperature range : Flow (at 6 bar, P=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Internal pilot : single operator and 3 positions : PSI double operator : PSI External pilot : vacuum to 150 PSI Single operator and 3 positions : PSI Double operator : PSI Not required, if used select a medium aniline point lubricant (between 180 F to 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1/8 : (0.9 C v ), 1/4" : (1.3 C v ), 3/8" : (1.35 C v ) 200 cm 3 /min Epoxy encapsulated - class wires - Continuous duty. -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 9 ms De-energize : 6 ms 120/60 Energize : 5-12 ms De-energize :6-13 ms Spare parts : Options : dimensions Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal between solenoid and pilot body : Pilot valve : TM-DXXX-XXX, including seal Mounting screw pilot to main valve : Pressure seal between valve and base : Mounting screw valve to base (x2) : SPP threads. Flow controls (Part N. FC82-) Explosion-proof model. Dimensions shown are metric (mm) 149,0 DOULE OPERTOR 120,5 SGLE OPERTOR 149,0 DOULE OPERTOR 120,5 SGLE OPERTOR 4,5 27,5 24,0 OPTIONL SNDWICH FLOW CONTROLS 27,5 2 Ø 5,3 15,5 15,5 14,5 12,5 20,5 41,0 1/8-27 NPTF External pilot port 83,2 104,2 21,0 26,0 PILOT 22,0 21,0 80,0 26,0 47,3 CONDUIT CYL CYL 9,0 1/2-14 NPSM Conduit port 14,5 11,3 50,0 25,0 38,5 PILOT Port size 1/8 & 1/4 NPTF 19.5 mm 3/8 NPTF 17.0 mm 102 Consult Precautions page 364 before use, installation or service of MC Valves

5 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Individual mounting Series - 1/8-1/4-3/ C v plug-in OPERTIONL ENEFITS 1. alanced spool, immune to variations of pressure. 2. Short stroke with high flow. 3. The piston (booster) provides maximum shifting forces. 4. Powerful return force thanks to the combination of mechanical and air springs. 5. onded spool with minimum friction, shifting in a glass-like finished bore. 6. Wiping effect eliminates sticking. 7. Pilot valve with balanced poppet, high flow, short and consistent response times. 8. Long service life. HOW TO ORDER Port size Pilot air Single operator Double operator Closed center Open center Pressure center Valve less base Internal 1/8 NPTF External TM-DXXP-XD 82---TM-DXXP-XD 82--D-TM-DXXP-XD TM-DXXP-XD 82---TM-DXXP-XD 82--D-TM-DXXP-XD 82-E-000-TM-DXXP-XD 82-E--TM-DXXP-XD 82-E-D-TM-DXXP-XD 82-F-000-TM-DXXP-XD 82-F--TM-DXXP-XD 82-F-D-TM-DXXP-XD 82-G-000-TM-DXXP-XD 82-G--TM-DXXP-XD 82-G-D-TM-DXXP-XD 45 Internal 82---TM-DXXP-XD 82---TM-DXXP-XD 82-E--TM-DXXP-XD 82-F--TM-DXXP-XD 82-G--TM-DXXP-XD 1/4 NPTF External 82--D-TM-DXXP-XD 82--D-TM-DXXP-XD 82-E-D-TM-DXXP-XD 82-F-D-TM--DXXP-XD 82-G-D-TM-DXXP-XD 3/8 NPTF Internal External 82--C-TM-DXXP-XD 82--CD-TM-DXXP-XD 82--C-TM-DXXP-XD 82--CD-TM-DXXP-XD 82-E-C-TM-DXXP-XD 82-E-CD-TM-DXXP-XD 82-F-C-TM-DXXP-XD 82-F-CD-TM-DXXP-XD 82-G-C-TM-DXXP-XD 82-G-CD-TM-DXXP-XD 700 SOLENOID OPERTOR D XX P- X D * 900 XX * Other options available, see page 361. OPTIONS Voltage 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) TM-DXXP-XD - For light in body replace by C. - For pilot exhaust out main exhaust replace by D. For light replace by F. Use TU pilot body for pilot exhaust to main exhaust, main exhaust cannot be restricted (NO flow controls) available with single pressure valve only. TU replaces TM. - For piped pilot exhaust replace TM by TP. - For dual pressure valves, replace by C, by D, E by M, F by L, G by H. (Requires sandwich regulator - see pressure regulator section) 82---TM-DXXP-XD - Replace by for bottom ports (1/8 or 1/4 only) - Replace by C for side and bottom ports (1/8 or 1/4 only) X 103 Manual operator 1 Non-locking 2 Locking Consult Precautions page 364 before use, installation or service of MC Valves ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC 500

6 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% M O N T H S technical data Fluid : Pressure range : Pilot pressure : Lubrication : Filtration : Temperature range : Flow (at 6 bar, P=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Internal pilot : single operator and 3 positions : PSI double operator : PSI External pilot : vacuum to 150 PSI Single operator and 3 positions : PSI Double operator : PSI Not required, if used select a medium aniline point lubricant (between 180 F to 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1/8" : (0.9 C v ), 1/4 (1.3 C v ), 3/8" : (1.35 C v ) 200 cm 3 /min Epoxy encapsulated - class wires - Continuous duty. -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 9 ms De-energize : 6 ms 120/60 Energize : 5-12 ms De-energize :6-13 ms Spare parts : Options : Solenoid operator (power 5.4 W ) : DXXP-XD, including mounting screws Seal between solenoid and pilot body : Pilot valve : TM-DXXP-XD, including seal Mounting screw pilot to main valve : Pressure seal between valve and base : Mounting screw valve to base (x2) : SPP threads. Flow controls (Part N. FC82-) Explosion-proof model. Lights in base. dimensions Dimensions shown are metric (mm) 149,0 DOULE OPERTOR 120,5 SGLE OPERTOR 3,9 (OPTION : light) 3,9 (OPTION : Light) 83,2 104,2 4,5 27,5 24,0 1/8-27 NPTF EXTERNL PILOT PORT 11,3 50,0 PILOT 25,0 22,0 OPTIONL SNDWICH FLOW CONTROLS 38,5 PILOT 27,5 2 Ø 5,3 21,0 26,0 47,3 1/2 NPSM 15,5 15,5 14,5 12,5 20,5 41,0 CONDUIT CYL CYL 14,5 21,0 26,0 Port size 1/8, 1/4 (OPTIONL OTTOM PORTS) 80,0 9,0 1/8-1/4 3/ Consult Precautions page 364 before use, installation or service of MC Valves

7 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Manifold mounting Series - 1/4-3/ C v non plug-in OPERTIONL ENEFITS 1. alanced spool, immune to variations of pressure. 2. Short stroke with high flow. 3. The piston (booster) provides maximum shifting forces. 4. Powerful return force thanks to the combination of mechanical and air springs. 5. onded spool with minimum friction, shifting in a glass-like finished bore. 6. Wiping effect eliminates sticking. 7. Pilot valve with balanced poppet, high flow, short and consistent response times. 8. Long service life. HOW TO ORDER Port size Pilot air Single operator Double operator Closed center Open center Pressure center Valve less base Internal 1/4 NPTF External TM-DXXX-XXX 82--K-TM-DXXX-XXX 82--KD-TM-DXXX-XXX TM-DXXX-XXX 82--K-TM-DXXX-XXX 82--KD-TM-DXXX-XXX 82-E-000-TM-DXXX-XXX 82-E-K-TM-DXXX-XXX 82-E-KD-TM-DXXX-XXX 82-F-000-TM-DXXX-XXX 82-F-K-TM-DXXX-XXX 82-F-KD-TM-DXXX-XXX 82-G-000-TM-DXXX-XXX 82-G-K-TM-DXXX-XXX 82-G-KD-TM-DXXX-XXX 45 Internal 82--CK-TM-DXXX-XXX 82--CK-TM-DXXX-XXX 82-E-CK-TM-DXXX-XXX 82-F-CK-TM-DXXX-XXX 82-G-CK-TM-DXXX-XXX 3/8 NPTF External 82--CKD-TM-DXXX-XXX 82--CKD-TM-DXXX-XXX 82-E-CKD-TM-DXXX-XXX 82-F-CKD-TM-DXXX-XXX 82-G-CKD-TM-DXXX-XXX SOLENOID OPERTOR D XX X - X XX * 700 XX Voltage X Wire length X Manual operator XX Electrical connection 120/60, 110/50 18 (Flying leads) 1 Non-locking K Square connector 240/60, 220/50 J Connector 2 Locking KD Square connectorwith light C 24/60, 24/50 J Rectangular connector F 24 VDC (1.8 W) JD Rectangular connector with D 24 VDC (5.4 W) light DF 24 VDC (12.7 W) Flying leads Note : KD connector shown in photo. * Other options available, see page 361. OPTIONS TM-DXXX-XXX - For pilot exhaust out main exhaust replace by E. lso, TM pilot body is replaced by TU pilot body. Main exhaust cannot be restricted (No flow controls) available with single pressure valve only. - For piped pilot exhaust replace TM by TP. - For dual pressure valves, replace by C, by D, E by M, F by L, G by H. (Requires sandwich regulator - see pressure regulator section) 82-XX-K-TM-DXXX-XXX - Replace K by L for bottom cyl. ports - Replace K by M for bottom inlet port - Replace K by N for bottom inlet and cyl. ports - Replace K by P for bottom and end cyl. ports - Replace K by R for bottom and end cyl. ports w/bottom inlet - Replace K by S for selector base with side ports 105 Consult Precautions page 364 before use, installation or service of MC Valves ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC 500

8 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% M O N T H S technical data Fluid : Pressure range : Pilot pressure : Lubrication : Filtration : Temperature range : Flow (at 6 bar, P=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Internal pilot : single operator and 3 positions : PSI double operator : PSI External pilot : vacuum to 150 PSI Single operator and 3 positions : PSI Double operator : PSI Not required, if used select a medium aniline point lubricant (between 180 F to 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1/4 (1.3 C v ), 3/8" : (1.35 C v ) 200 cm 3 /min Epoxy encapsulated - class wires - Continuous duty. -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 9 ms De-energize : 6 ms 120/60 Energize : 5-12 ms De-energize :6-13 ms Spare parts : Options : dimensions Solenoid operator (power 5.4 W) : DXXX-XXX, including mounting screws Seal between solenoid and pilot body : Pilot valve : TM-DXXX-XXX, including seal Mounting screw pilot to main valve : Pressure seal between valve and base : Mounting screw valve to base (x2) : Tie-rod (x2) : Fastening kit : N SPP threads. Flow controls (Part N. FC82-) Explosion-proof model. Dimensions shown are metric (mm) ,7 DOULE OPERTOR 164,2 SGLE OPERTOR 174,7 DOULE OPERTOR 164,2 SGLE OPERTOR 1 1/4 NPSM 9,0 COND 126,2 46,0 28,0 27,0 OPTIONL SNDWICH FLOW CONTROLS COND 17,5 59,0 1/8-27 NPTF (OPTIONL COMMON EXT. PILOT PORT) 26,5 47,0 164,2 3/8-4 PLCES 6,5 96,0 4,5 23,0 12,0 CYL CYL 37,0 22,5 46,0 ± 0,2 1/8 126,2 18,5 59,0 2 Ø 5,3 18,5 EXT PILOT CYL 105,2 36,0 60,5 23,0 16,0 CYL 14,0 COND 16 18,5 46,0 106 Consult Precautions page 364 before use, installation or service of MC Valves

9 Direct solenoid and solenoid pilot operated valves Function Port size Flow (Max) Manifold mounting Series - 1/4-3/ C v plug-in OPERTIONL ENEFITS 1. alanced spool, immune to variations of pressure. 2. Short stroke with high flow. 3. The piston (booster) provides maximum shifting forces. 4. Powerful return force thanks to the combination of mechanical and air springs. 5. onded spool with minimum friction, shifting in a glass-like finished bore. 6. Wiping effect eliminates sticking. 7. Pilot valve with balanced poppet, high flow, short and consistent response times. 8. Long service life. HOW TO ORDER Port size Pilot air Single operator Double operator Closed center Open center Pressure center Valve less base Internal 1/4 NPTF External TM-DXXP-XD 82--K-TM-DXXP-XD 82--KD-TM-DXXP-XD TM-DXXP-XD 82--K-TM-DXXP-XD 82--KD-TM-DXXP-XD 82-E-000-TM-DXXP-XD 82-E-K-TM-DXXP-XD 82-E-KD-TM-DXXP-XD 82-F-000-TM-DXXP-XD 82-F-K-TM-DXXP-XD 82-F-KD-TM-DXXP-XD 82-G-000-TM-DXXP-XD 82-G-K-TM-DXXP-XD 82-G-KD-TM-DXXP-XD 45 Internal 82--CK-TM-DXXP-XD 82--CK-TM-DXXP-XD 82-E-CK-TM-DXXP-XD 82-F-CK-TM-DXXP-XD 82-G-CK-TM-DXXP-XD 3/8 NPTF External 82--CKD-TM-DXXP-XD 82--CKD-TM-DXXP-XD 82-E-CKD-TM-DXXP-XD 82-F-CKD-TM-DXXP-XD 82-G-CKD-TM-DXXP-XD SOLENOID OPERTOR D XX P- X D * 700 XX Voltage 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 F 24 VDC (1.8 W) D 24 VDC (5.4 W) DF 24 VDC (12.7 W) * Other options available, see page 361. OPTIONS TM-DXXP-XD 82-XX-K-TM-DXXP-XD - Replace K by L for bottom cyl. ports - Replace K by M for bottom inlet port - Replace K by N for bottom inlet and cyl. ports - Replace K by P for bottom and end cyl. ports - Replace K by R for bottom and end cyl. ports w/bottom inlet - Replace K by S for selector base with side ports X 107 Manual operator 1 Non-locking 2 Locking - For light in body replace by C. - For pilot exhaust out main exhaust replace by D. For light replace by F. Use TU pilot body for pilot exhaust to main exhaust, main exhaust cannot be restricted (No flow controls) available with single pressure valve only. TU replaces TM. - For piped pilot exhaust replace TM by TP. - For dual pressure valves, replace by C, by D, E by M, F by L, G by H. (Requires sandwich regulator - see pressure regulator section) Consult Precautions page 364 before use, installation or service of MC Valves ISO 1 ISO 2 ISO 3 MC 125 MC 250 MC 500

10 100% 100% WRRNTY 18 O F P R O D U C T I O N T E S T E D 100% M O N T H S technical data Fluid : Pressure range : Pilot pressure : Lubrication : Filtration : Temperature range : Flow (at 6 bar, P=1bar) : Leak rate : Coil : Voltage range : Protection : Power : Response times : Compressed air, vacuum, inert gases Internal pilot : single operator and 3 positions : PSI double operator : PSI External pilot : vacuum to 150 PSI Single operator and 3 positions : PSI Double operator : PSI Not required, if used select a medium aniline point lubricant (between 180 F to 210 F) 40 µ 0 F to 120 F (-18 C to 50 C) 1/4 (1.3 C v ), 3/8" : (1.35 C v ) 200 cm 3 /min Epoxy encapsulated - class wires - Continuous duty. -15% to +10% of nominal voltage Consult factory Inrush : 10.9 V Holding : 7.7 V = 1.8 to 12.7 W 24 VDC (5.4 W) Energize : 9 ms De-energize : 6 ms 120/60 Energize : 5-12 ms De-energize :6-13 ms Spare parts : Options : dimensions Solenoid operator (power 5.4 W) : DXXP-XD, including mounting screws Seal between solenoid and pilot body : Pilot valve : TM-DXXP-XD, including seal Mounting screw pilot to main valve : Pressure seal between valve and base : Mounting screw valve to base (x2) : Tie-rod (x2) : Fastening kit : N SPP threads. Flow controls (Part N. FC82-) Explosion-proof model. Lights in base. Dimensions shown are metric (mm) 174,7 DOULE OPERTOR 164,2 SGLE OPERTOR 174,7 DOULE OPERTOR 164,2 SGLE OPERTOR 1 1/4 NPSM 46,0 28,0 9,0 COND 27,0 OPTIONL SNDWICH FLOW CONTROLS COND 126,2 17,5 1/8 (OPTIONL COMMON EXT. PILOT PORT.) 59,0 26,5 47,0 164,2 3/8-4 PLCES 6,5 96,0 4,5 23,0 12,0 CYL CYL 18,5 59,0 2 Ø 5,3 37,0 22,5 46,0 ± 0,2 EXT PILOT 1/8 105,2 126,2 18,5 CYL 36,0 60,5 23,0 16,0 CYL COND 16 14,0 18,5 46,0 108 Consult Precautions page 364 before use, installation or service of MC Valves

11 I n t r i n s i c a l l y S a f e V a l v e s HOW TO ORDER ODY OPTIONS SE OPTIONS PILOT VLVE 82 - XX - XXX - (XX - DXXX - XXX) SPOOL TYPE - VLVE FUNCTION 0 Individual base or manifold only Single Operator - single pressure Double operator - sinle pressure C Single operator - dual pressure D Double operator - dual pressure E 3-position closed center F 3-position open center G 3-position single pressure, pressure center H 3-position dual pressure,* pressure center J Single solenoid single pressure solenoid on end K Single solenoid dual pressure solenoid on end L 3-position dual pressure,* open center M 3-position dual pressure,* closed center * Note: For dual pressure w/o regulators consult factory. ODY TYPE Plug-in body Non Plug-in body D. & MNIFOLD SE PORT CONFIG. --Individ ual ase-- 0 Valve only - no base Standard side ports (1/8, 1/4, or 3/8 ) ottom ports only* C Side and bottom ports* D Side inlet, side exhaust, bottom cylinder ports* * ottom ports available in 1/8 & 1/4 only in individual base --Manifold ase-- K Standard ports (1/4 or 3/8 only) L ottom cylinder ports* M ottom inlet port N ottom inlet and cylinder ports* P ottom and end cylinder ports* R ottom cylinder & end cylinder ports w/bottom inlet port* S Selector base - standard side ports * ottom parts available in 1/4 & 3/8 only on manifold. ottom inlet available 1/4 only. For bottom O-ring ports, consult factory. T. OR EXT. PILOT* --Internal Pilot-- 0 Valve only - no base No light in base --External Pilot-- 0 Valve only - no base D No light in base * Use internal for main valve pressures of PSIG. Use external for main valve pressures of 28 Hg vacuum - 25 PSIG PILOT VLVE OPTIONS - (XX - DXXX - XXX) PORT SIZE - THRED TYPE 0 Valve only - no base 1/8 NPTF 1/4 NPTF C 3/8 NPTF D 1/8 SPPL E 1/4 SPPL F 3/8 SPPL PILOT UST F Muffled exhaust VOLTGE FR 12VDC (0,6w) FS 24VDC (0,6w) LED WIRE LENGTH --Plug-in Valve/ase-- P Plug-in 8 - standard Non Plug-in Valve/ase-- 18 E F 96 C 36 J 6 * D 48 * Lead wire length for external plug-in connectors must be J MNUL OPERTOR 0 No manual operator 1 Nonlocking operator 2 Locking operator 3 Nonlocking extended operator 4 Locking extended operator ELECTRICL CONN. --Plug-in Valve/ase-- D Plug-in (standard) --Non Plug-in Valve/ase-- Grommet C Conduit 1/2 NPS CM Metal conduit 1/2 NPS CN Metal conduit w/grd. 1/2 NPS --External Plug-in-- J Rectangular plug-in JM Rectangular male only K Mini plug-in KJ Mini plug-in male only T Dual tabs (.110) w/ receptables TJ Dual tabs (.110) w/o receptables HOW TO ORDER 82 SERIES FLOW CONTROL MODULE* FC 82- FC 82- Plug-in flow control assembly Non plug-in flow control assembly *If flow control module is to be installed between valve and base or valve and manifold at the factory, add -9 after the flow control model number, i.e., FC The flow control model number should follow the valve model number on which it is to be installed. 347 NOTE: Reference regulator ordering section if a sandwich regulator is required. NOTE: If a flow control assembly is used with the dual pressure regulator option, only the flow control on the end is functional. (Controls both cylinder ports.) Consult Precautions page 364 before use, installation or service of MC Valves

12 O p t i o n s O P T I O N S Codification table for voltages / Wire length / Manual operators / Electrical connections VLVE CODE - D XX X - X XX OPTIONS VILLE FOR - Solenoid valves 35, 45 and 82 Series 361 Consult Precautions page 364 before use, installation or service of MC Valves

13 O P T I O N S 1. VOLTGE - D XX X - X XX VOLTGE 120/60, 110/50 240/60, 220/50 C 24/60, 24/50 D 24/60 E 200/60 F 240/50 G 100/50, 100/60, 110/60 D 24 VDC (5.4 W) D 12 VDC (5.4 W) DC 12 VDC (7.5 W) DD 24 VDC (7.3 W) DE 12 VDC (12.7 W) - CLSFonly DF 24 VDC (12.7 W) - CLSF only DK 110 VDC (4.7 W) DL 64 VDC (6 W) DM 36 VDC (5.3 W) DN 6 VDC (6 W) DP 48 VDC (5.8 W) DU 24 VDC (6 W) E 12 VDC (6 W) F 12 VDC (1.8 W) F 24 VDC (1.8 W) FE 12 VDC (2.4 W) FF 24 VDC (2.4 W) 2. WIRE LENGTH - D XX X - X XX WIRE LENGTH C 36 D 48 E 72 F 96 J For external plug-in connector ( J, K & T type electrical connection) P For plug-in valves (82 Series only) 362 Consult Precautions page 364 before use, installation or service of MC Valves

14 O p t i o n s O P T I O N S 3. MNUL OPERTOR - D XX X - X XX MNUL OPERTOR 0 No operator 1 Non-locking recessed 2 Locking recessed 3 Non-locking extended 4 Locking extended 4. ELECTRICL CONNECTION - D XX X - X XX ELECTRICL CONNECTION Flying leads K with protection diode L with protection varistor (M.O.V.) ** C 1/2" NPS conduit ** CM 1/2" NPS metal conduit ** CN 1/2" NPS metal conduit w/ground ** J Rectangular connector ** JD Rectangular connector with light ** JM Rectangular connector, male only K Square connector K Square connector with protection diode KC Square connector with protection varistor (M.O.V.) KD Square connector with light KE Square connector with light and protection diode KF Square connector with light and protection varistor (M.O.V.) KG Square connector with LED light & diode KJ Square connector (male only) KK Square connector with protection diode (male only) KL Square connector with protection varistor (male only) (M.O.V.) *** M Electrical common conduit T Dual tabs T T with protection diode TD T with light TE T with light and protection diode TJ Dual tabs (male only) TK TJ with protection diode TM TJ with light TN TJ with light and protection diode D* Plug-in connector DK* D with protection diode DL* D with protection varistor (M.O.V.) FM Plug-in FN Plug-in with diode FP Plug-in with M.O.V. * To be used with 82 Series only ** Inline valves only for 35 & 45 series. No restrictions for 82 series. *** Stacking valves only for 35 & 45 series. Conduit end plate kit required, one per stack. 35 series : M series : M Consult Precautions page 364 before use, installation or service of MC Valves