WELCOME TO MAGNATROL

Transcription

1 Catalog 6

2 BULLETIN 6-INDEX WELCOME TO MAGNATROL Process Control Solenoid Valves For Water Oil Air Gas Steam Cryogenics Vacuum Solvents Brine Oxygen Corrosive Fluids Magnatrol Valve Corp. Established 1936 Experienced Dedicated Sales Staff Application / Engineering Assistance Excellent Product Support Quick Delivery Our continued success has come from manufacturing a top quality product, product support, commitment to service and on-time delivery assuring complete customer satisfaction. Our Products Every valve is manufactured and tested in-house following Quality Assurance Standards where production operations are under the control of our dedicated, experienced staff and workforce. TABLE OF CONTENTS Category Pages(s) Coils Construction Features Bronze Valves N & NR & A & AR & 9 M & MR & S & SR & 13 L & LR & 15 G & GR & 1 D Strainers Stainless Steel Valves J & JR & 21 K & KR & W & WR & Optional Features & 2 Special Valves Universal Mount P Sandy Well Water Gritty Coolant & 31 Ordering Information & Terms & Conditions/Contact Info * Custom Engineered Valves, Special Alloys, Temperatures, Pressures and Applications as well as Modifications to Standard Magnatrol Valves are available through Magnatrol s Clark-Cooper Division. (See bottom of page 3) High Quality Bronze and Stainless Steel Solenoid Valves* Pressures up to 0 * Temperatures up to 0 F * Cryogenic and Oxygen Service Applications Normally Closed (Energize to Open) Normally Open (Energize to Close) Continuous Duty Coils for all & Voltages NO Differential Pressure Required to Open Full Port-Internal Pilot Operated or Direct Acting 2-Way Straight Thru Design Packless Construction 2 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

3 BULLETIN 6-VALVE SELECTION CHART VALVE SELECTION CHART Ordering Information - See Pages 32 & For Optional Features - See Pages 26 & 2 VALVE SELECTION CHART (For Fluids/Gases Not Listed And For Special Applications, Consult Factory) Max. Temperature Up To 212 F Up To 0 F Construction Bronze Stainless Steel Valve Type D G/GR N/NR A/AR M/MR S/SR L/LR K/KR W/WR Page 16 & 1 6 & & 9 & 12 & & & & Max. Pressure / /4-3 3/ -3/ Internal Port Full Full Reduced Full Reduced Full Full Full Full Air Brine Gas Oil Solvents Water Vacuum Steam Cryogenic Oxygen, Liquid Oxygen, Gaseous Corrosive Use the chart above to determine suitable types of Magnatrol valves for a given application. Example: A normally closed valve for use on 0 psi steam, there are three types suitable and the final selection can only be made after referring to Bulletins 6-M, 6-S and 6-W on pages, 12 and 22 respectively. Maximum Differential Pressure: When specifying a valve, the Maximum Differential Pressure must be equal to or greater than the application. Care should be taken not to over specify the valve by choosing a valve with a Maximum Differential Pressure that is excessively beyond the application. If you are unsure please consult the factory. 2-Way and 3-Way 1/4 Thru 6 Pressures to,000 s up to 5 F Dirty / Viscous & Corrosive Fluids Bronze, 316SS, Monel, Alloy 20 & Hastelloy 3-Valve Manifold for CNG Refueling End connections: NPT, Flange, Union, Socket Weld, Butt Weld, Nipples etc. Options: Remote Trip with Manual or Automatic Reset and many others High Pressure Cartridge Valve,000 3-Way Trip Valve with 2 Position Indicating Switches and Manual Reset Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 3

4 BULLETIN 6-COIL SOLENOID COILS CONTINUOUS DUTY COILS ELECTRICAL CHARTERISTICS Coils are stocked for the following voltages: Voltage , Hertz * * 5V for locomotive applications * Furnished with surge protecting capacitor Reference should be made to the Bulletins to determine the availability of a required valve for a specific power supply. Consult the factory for information regarding voltage and frequencies not listed. ENCAPSULATED COIL Valves for A.C. service can be converted for use on other A.C. voltages simply by changing the coil. Similarly D.C. valves can be converted for other D.C. voltages. Consult factory regarding conversion from A.C. to D.C. or D.C. to A.C. CURRENT CONSUMPTION: Current values shown in the bulletins are for 120 volts, hertz. For other voltages the current is inversely proportional: For instance, if a given valve draws 0.5 amperes on 120 volts it would draw 0. amperes on 2 volts, or 0.1 amperes on volts. Where power consumption is shown in D.C. watts, the values given should be divided by line voltage to obtain the current in amperes. Power consumption for all valves is shown in the individual bulletins. CONSTRUCTION: Continuous Duty Construction: Coils can be energized continuously without overheating or failure. Wire Leads: long gauge wire standard (longer continuous leads available) Encapsulated: Coils are encapsulated for temperature of intended service, providing excellent resistance to shock, moisture, oil and chemicals COIL CLASS: GENERAL SERVICE - CLASS B HIGH TEMPERATURE - CLASS H Maximum Fluid Maximum Ambient Maximum Fluid Maximum Ambient Temperature Temperature Temperature Temperature 212 F ( C) 04 F ( C) 00 F (206 C) 12 F (0 C) INSTALLATION: The coil is a two wire device which may be controlled by either a single or double pole switch. The switch should always be installed in the hot leg of 120 volt circuits. Where both legs are hot, such as 2 or volt circuits, a double pole switch is preferable, however, if a single pole switch is used, then the wiring should have top quality insulation since even minute leakage currents may give rise to sticking problems. On motor hookup with step control starter, full voltage should be supplied to coil immediately. Note: Coil can be readily changed while valve is still under pressure. 4 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

5 BULLETIN 6-CONSTRUCTION VALVE CONSTRUCTION FEATURES Valve Construction Features: 2-way straight thru globe design Bronze or Stainless Steel body w/ female NPT threads standard Stainless Steel available with 1# and # flanged ends Full port-internal pilot operated or direct acting Packless construction Continous duty coils for all voltages No differential pressure required to open Easy In-Line Service Inspect, clean or service all internal parts of full port-internal pilot operated or direct acting while the valve body remains in the pipeline shortening costly down time and increasing productivity. HOUSING Construction: Malleable or Cast Iron Designed for rugged industrial use Self contained terminal box with NPS conduit connection COIL Available Class B or H insulation Designed for continuous duty service Available in most or voltages Coil Enclosure Available: NEMA 12, 4, 4X and Explosion Proof Conduit Boss Coil BONNET PISTON ASSEMBLY A sturdily constucted stem assembly consisting of a plunger and stainless steel pilot flexibly connected to the piston Discs are available in various materials dictated by operating conditions A flanged metallic tube encloses the plunger and hermetically seals the top of the valve VALVE BODY Constructed of high pressure cast bronze or stainless steel in a globe pattern with screwed ends* Bonnet Piston Valve Disc Disc Nut Bonnet Ring Plunger Valve Spring Pilot Valve Valve Body Normally Closed Valve shown is typical of Type A, thru 1-1/4 Available in a full range of sizes * Stainless Steel valves available with flanged ends. Flanged Bronze valves available through Magnatrol s Clark-Cooper Division (See bottom of MAGNATROL SOLENOID OPERATED VALVES are used to control the flow of liquids or gases, generally in conjunction with automatic control apparatus such as thermostat, float switch, time switch, or flow meter. Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 5

6 BULLETIN 6-N BRONZE SOLENOID VALVES 212 F FOR OPTIONS & CESSORIES TYPE N - NORMALLY CLOSED TO 3/4 PIPE SIZE DIRECT TING - ORIFICE SIZES 3/32 TO Valve opens when energized and closes when de-energized. In this direct acting valve, when the coil is energized, the stem is lifted from its conical seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. *Valve Stem Stainless Steel *Spring Stainless Steel *Body Seal - Buna N *Orifice Seal - Metal to Metal * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, leads - (Class H available) To control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. 3/ Max. Valve Port Hold Inrush DISCONTINUED -- USE VALVE WITH BUSHING A Dimensions In B C D 3/4 3/ N22 1/4 N42 5 3/16 N /4 5-3/ 2-3/4 2-3/4 0 5/32 N2 1 1/ N62 2 3/32 N2 3/ N22 5 5/16 N32 0 1/4 N / 6-3/ 2-3/4 1 3/16 N52 1/ N62 15 N13 5/16 N / 2-3/4 2-/ 30 N / 6-2-/ 5 5/16 N Voltage ( or ) Optional Soft Seat Orifice Seal (for applications requiring tight seating) Viton - Suitable for Fuel Oils, Gaseous Oxygen and other compatible fluids 6 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

7 BULLETIN 6-NR BRONZE SOLENOID VALVES TYPE NR - NORMALLY OPEN TO 3/4 PIPE SIZE DIRECT TING - ORIFICE SIZES 3/32 TO Valve closes when energized and opens when de-energized. In this direct acting valve, when the coil is energized, the stem is pressed into its conical seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Buna N *Orifice Seal - Metal to Metal * Shading Coil - Copper *Stem Pin Stainless Steel Coil - Encapsulated Class B, leads - (Class H available) To control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. 212 F FOR OPTIONS & CESSORIES 3/ Max. Valve Port Hold Inrush DISCONTINUED -- USE VALVE WITH BUSHING A Dimensions In B C D Voltage ( or ) 3/4 3/ NR22 1/4 NR42 0 3/16 NR /32 NR / 2-3/4 2-3/4 1 1/ NR62 3/32 NR2 3/ NR22 0 5/16 NR /4 NR / -1/ 2-3/4 1 3/16 NR / NR62 13 NR /16 NR /4 6-3/ 2-3/4 2-/ 2 NR13 0 5/16 NR / -1/4 2-/ Optional Soft Seat Orifice Seal (for applications requiring tight seating) Viton - Suitable for Fuel Oils, Gaseous Oxygen and other compatible fluids Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

8 BULLETIN 6-A BRONZE SOLENOID VALVES 212 F Except valves listed for 0 TYPE A FULL PORT - NORMALLY CLOSED TO 3 PIPE SIZE Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring Stainless Steel *Body Seal - Buna N or Non Asbestos Gasket * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, leads - (Class H available) Vacuum materials and free of sediment. Valve operates from zero to maximum horizontal pipe with solenoid enclosure vertical and on top. 3/ / Max Dimension In Hold Inrush A B C D 1 A42 A32 A / 2-3/4 3-1/4 0 EA / 4-1/ 3-1/4 1 A A A / 6 2-3/4 A53 A / 0 E1A / 4-1/ 1 A24 A A / 6-5/ 2-3/4 4-1/ A54 A / - 4-1/ 4-1/ 0 E1A / - 4-1/ 4-1/ 90 A A A / 6-3/4 2-3/4 4- A A / -3/4 4-0 A / -3/ A46 1A46 4. A / 4 4-/ 41A36 41A A / 4-4-/ 0 36A2 36A A /4 5-3/ 6 42A3 42A /4 5-3/ A A2 1 43A4 43A / -1/ 5-/ -1/4 143A A29 44A49 44A /4-6-5/ -3/ 144A D(Flanged) 1# 4-3/ /4 9- FOR OPTIONS & CESSORIES Voltage ( or ) Not available for operation Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

9 BULLETIN 6-AR BRONZE SOLENOID VALVES TYPE AR FULL PORT - NORMALLY OPEN TO 3 PIPE SIZE Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring Stainless Steel *Body Seal - Buna N or Non Asbestos Gasket *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, leads - (Class H available) To control the flow of Water, Oil, Air, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. FOR OPTIONS & CESSORIES Voltage ( or ) Not available for operation 3/ / Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey F Except valves listed for 0 Max Dimension In Hold Inrush A B C D 1 AR42 AR32 AR / 2-3/4 3-1/4 0 EAR / -1/4 4-1/ 3-1/4 1 AR AR /4-1/ 2-3/4 AR AR /4-1/ 0 E1AR / 4-1/ 1 AR24 AR /4 2-3/4 4-1/ AR34 AR / 4-1/ 0 E1AR /4 -/ 4-1/ 4-1/ 90 AR AR /4-1/ 2-3/4 4- AR AR /4 9-1/ 4-0 AR / AR26 AR / / 41AR AR56-5/ 9-3/4 4-4-/ 0 141AR AR2 36AR / -1/ 5-3/ 6 42AR3 42AR AR / -3/ 5-3/4 6 43AR2 1 43AR AR / -1/4 44AR29 143AR AR AR / -1/ 6-5/ -3/ 144AR D(Flanged) 1# 4-3/ /4 9-9

10 BULLETIN 6-M BRONZE SOLENOID VALVES 0 F 1 FOR OPTIONS & CESSORIES TYPE M - NORMALLY CLOSED 3/ TO 3/4 PIPE SIZE DIRECT TING - ORIFICE SIZES 1/ TO Valve opens when energized and closes when de-energized. In this direct acting valve, when the coil is energized, the stem is lifted from its conical seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. *Valve Stem Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Metal to Metal * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, leads To control the flow of Steam, Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-29 F), Liquid Argon (-303 F) and Liquid Nitrogen (-320 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. INLET 3/ 3/4 Max. Valve Port **Cleaning: Cryogenic valves are degreased and cleaned to keep them free of moisture. Oxygen valves are also black light tested. Hold Inrush 3/ M21 1/4 M41 5 3/16 M /4 5-2-/ 2-5/ 0 5/32 M1 1 1/ M61 3/ M /16 1/4 M31 M / 6-3/ 2-5/ 1 3/16 M51 3/ M22 1/4 M42 5 3/16 M /4 5-2-/ 2-3/4 0 5/32 M2 1 1/ M62 3/ M /16 1/4 M32 M / 6-3/ 2-3/4 1 3/16 M /16 M13 M / 2-/ 2-/ /16 M13 M / 6-2-/ A Dimensions In B C D Optional Soft Seat Orifice Seal (for applications requiring tight seating) Viton - Suitable for Fuel Oils, Gaseous Oxygen and other compatible fluids Voltage ( or ) Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

11 BULLETIN 6-MR BRONZE SOLENOID VALVES TYPE MR - NORMALLY OPEN 3/ TO 3/4 PIPE SIZE DIRECT TING - ORIFICE SIZES 1/ TO Valve closes when energized and opens when de-energized. In this direct acting valve, when the coil is energized, the stem is pressed into its conical seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. * Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Metal to Metal * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, leads Voltage ( or ) (See pages 26& 2) 3/ 3/4 Max. To control the flow of Steam, Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-29 F), Liquid Argon (-303 F) and Liquid Nitrogen (-320 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. 0 F 1 FOR OPTIONS & CESSORIES **Cleaning: Cryogenic valves are degreased and cleaned to keep them free of moisture. Oxygen valves are also black light tested. Valve Port Hold Inrush 3/ MR21 1/4 MR41 0 3/16 MR /4 2-/ 2-5/ 90 5/32 MR1 1 1/ MR61 3/ MR /16 1/4 MR31 MR / -1/ 2-5/ 1 3/16 MR51 3/ MR22 1/4 MR42 0 3/16 MR /4 2-/ 2-3/4 90 5/32 MR2 1 1/ MR62 3/ MR /16 1/4 MR32 MR / -1/ 2-3/4 1 3/16 MR /16 MR13 MR /4 6-3/ 2-/ 2-/ 2 0 5/16 MR13 MR / -1/4 2-/ Optional Soft Seat Orifice Seal (for applications requiring tight seating) Viton - Suitable for Fuel Oils, Gaseous Oxygen and other compatible fluids UL Listed Valves - Consult Factory Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 A Dimensions In B C D

12 BULLETIN 6-S BRONZE SOLENOID VALVES 0 F TYPE S FULL PORT - NORMALLY CLOSED TO 3 PIPE SIZE Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, leads FOR OPTIONS & CESSORIES Max / / S22 4S42 129S42 14S 4S43 129S43 16S14 6S24 6S44 131S44 1S15 S 132S 1S S16 S26 1S46 141S46 36S1 36S2 42S4 142S4 43S 43S2 43S4 143S4 44S19 44S29 44S49 144S Hold TO CONTROL THE FLOW OF STEAM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Inrush Dimension In A B C D UL Listed Valves - Consult Factory Not available for operation / -1/ -/ -3/ 9-3/ -3/ / 13-3/4 5-/ 6-/ 6 6-5/ - 6-3/4-3/4-3/4-1/ 9-1/ -3/4 9-3/4-1/ - 2-/ 2-/ 3-1/4 3-5/ / 5-3/ 5-/ 6-5/ 3-1/4 3-1/ / / 4-/ 6 6-1/4-3/ D(Flanged) 1# 4-3/ /4 9- Voltage ( or ) 12 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

13 BULLETIN 6-SR BRONZE SOLENOID VALVES TYPE SR FULL PORT - NORMALLY OPEN TO 3 PIPE SIZE Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Springs - Inconel and 302 Stainless Steel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Copper *Stem Pin Stainless Steel Coil - Encapsulated Class H, leads TO CONTROL THE FLOW OF STEAM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Voltage ( or ) Max / / SR22 4SR42 129SR42 14SR 4SR43 129SR43 16SR14 6SR24 6SR44 131SR44 1SR15 SR 132SR 1SR SR16 SR26 1SR46 141SR46 36SR1 36SR2 42SR4 142SR4 43SR 43SR2 43SR4 143SR4 44SR19 44SR29 44SR49 144SR Hold Inrush UL Listed Valves - Consult Factory Not available for operation 0 F FOR OPTIONS & CESSORIES Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey Dimension In A B C D -1/ 9-1/ -1/ 9-1/4 9-1/ 9-3/4-3/4-3/ -5/ 12-3/ 12-5/ 6-1/ -3/4-5/ -1/ 9-1/ 9-3/ 9-9-3/4-1/ -3/ 2-/ 2-/ 3-1/4 3-5/ / 5-3/ 3-1/4 3-1/4 4-1/ 4-1/ / 4-/ 1-3/4 5-/ -1/4 6 6 D(Flanged) 1# 4-3/ / / -1/ 6-5/ -3/ 9-

14 BULLETIN 6-L BRONZE SOLENOID VALVES 0 F Except valves listed for 0 TYPE L FULL PORT - NORMALLY CLOSED TO 3 PIPE SIZE Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPT conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, leads FOR OPTIONS & CESSORIES FOR STEAM APPLICATIONS SEE BULLETIN 6-S Page 12 To control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-29 F), Liquid Argon (-303 F) and Liquid Nitrogen (-320 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. 3/ / Max L42 14L32 29L52 E29L62 14L 14L43 29L 129L53 Hold Inrush Dimension In D(Flanged) A B C D 1# 5-/ 2-/ 3-1/4 4-3/4 6-/ 3-1/4 6-/ 4 3-1/4-1/ 6 2-/ 5- -1/ E129L / 4 16L L / 3-1/4 4-1/ 31L L / - 4-1/ 0 E131L / / 90 1L 1L / 6-3/4 4-32L L / -3/4 3-5/ 4-0 1L / -3/ L26 L46 41L36 141L / 9-1/ / 4-/ 0 141L L2 36L4 42L3 42L L L2 43L4.0 43L L L L49 44L39 144L Not available for operation /4 9-3/4 5-3/ 5-3/ / -1/ 5-/ -1/ /4-6-5/ -3/ /4 9- ** CLEANING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage ( or ) 14 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

15 BULLETIN 6-LR BRONZE SOLENOID VALVES TYPE LR FULL PORT - NORMALLY OPEN TO 3 PIPE SIZE Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seal it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. 0 F Except valves listed for 0 ** CLEANING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage ( or ) 3/ / CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPT conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Springs - Inconel and 302 Stainless Steel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Copper *Stem Pin Stainless Steel Coil - Encapsulated Class H, leads FOR OPTIONS & CESSORIES FOR STEAM APPLICATIONS SEE BULLETIN 6-SR Page 13 To control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-29 F), Liquid Argon (-303 F) and Liquid Nitrogen (-320 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Max LR42 14LR32 29LR52 E29LR62 14LR 14LR43 29LR 129LR53 Hold Inrush Dimension In A B C D -1/ 9-1/ 9-1/ -1/4-1/ 2-/ 4 2-/ 3-1/4 3-1/4 3-1/ /4-1/ 0 E129LR /4-1/ LR24 16LR / -3/4 3-1/4 4-1/ 31LR LR / 4-1/ 0 E131LR / 4 4-1/ 90 1LR 1LR /4-1/ 4-32LR 132LR /4 9-1/ 3-5/ 4-0 1LR LR26 5 LR46 41LR36 141LR LR LR2 36LR4 42LR3 42LR / / 9-3/ 4 4-/ / 9-3/4 4-4-/ LR LR2 1 43LR LR3 143LR LR LR LR39 144LR Not available for operation / 12-5/ -1/ -3/ 5-3/ 5-3/ 1-3/4 5-/ -1/ / -1/ 6-5/ -3/ 6 6 D(Flanged) 1# 4-3/ /4 9- Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 15

16 BULLETIN 6-G BRONZE SOLENOID VALVES 212 F 1 TYPE G FULL PORT - NORMALLY CLOSED 1 TO 3 PIPE SIZE Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. FOR OPTIONS & CESSORIES 1 1-1/ Max G24 1G24 1G24 G 1G 1G G26 1G26 1G26 G2 1G2 3G2 43G2 143G2 44G29 144G UL Listed Valves - Consult Factory CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stem Stainless Steel *Pilot Valve Disc Holder - Brass *Pilot Valve Seal - Buna N (Viton available) *Spring Stainless Steel *Body Seal - Buna N or Non Asbestos Gasket *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, leads - (Class H available) To control the flow of Water, Air, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the pilot and main orifices make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Hold Inrush Dimension In A B C D / -1/ -1/ 9-1/ 9-/ 9-/ 9-/ 12-1/ 12-1/ / 6-1/ -1/ 6-3/ 6-3/ -3/ / -/ -/ -5/ 9-5/ 2-3/4 2-3/4 2-/ 2-/ 3-1/ 3-1/ 3-3/4 3-3/4 3-3/4 5-/ 5-/ 6-5/ 6-5/ 4-1/ 4-1/ 4-1/ 4-3/ 4-3/ 4-3/ 4-3/4 4-3/4 4-3/4 5-3/4 5-3/4 5-3/4 -/ -/ D(Flanged) 1# 6-3/4-3/4 13-5/16 Voltage ( or ) 16 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

17 BULLETIN 6-GR BRONZE SOLENOID VALVES TYPE GR FULL PORT - NORMALLY OPEN 1 TO 3 PIPE SIZE Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. 212 F 1 CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stem Stainless Steel *Pilot Valve Disc Holder - Brass *Pilot Valve Seal - Buna N (Viton available) *Spring Stainless Steel *Body Seal - Buna N or Non Asbestos Gasket *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) * Shading Coil - Copper *Stem Pin - Inconel To control the flow of Water, Air, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the pilot and main orifices make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. FOR OPTIONS & CESSORIES Voltage ( or ) 1 1-1/ Max GR24 GR24 GR GR GR26 GR26 GR2 1GR2 43GR2 44GR29 Hold Inrush Dimension In A B C D -5/ 9-5/ 9-3/ -1/ /4-1/4 12-3/4 13-5/ -1/4-1/4-3/4-3/4 -/ -/ 9-1/4 9-1/4-1/4-5/ 2-3/4 2-3/4 2-/ 3-1/ 3-3/4 3-3/4 5-/ 6-5/ 4-1/ 4-1/ 4-3/ 4-3/ 4-3/4 4-3/4 5-3/4 5-3/4 -/ D(Flanged) 1# 6-3/4-3/4 13-5/16 UL Listed Valves - Consult Factory Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 1

18 BULLETIN 6-D BRONZE SOLENOID VALVES 212 F 1 TYPE D FULL PORT - NORMALLY CLOSED 3/ TO 2 PIPE SIZE Valve opens when energized and closes when de-energized. In this direct acting valve the disc holder assembly is lifted from its seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Disc Holder - Brass Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. n. *Stem Stainless Steel *Spring Stainless Steel *Body Seal - Buna N *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) * Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, leads - (Class H available) FOR OPTIONS & CESSORIES To control the flow of Water, Air, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the main orifice make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. 3/ 3/ /4 1-2 Max D D D12 D12 D13 D13 D14 D14 D15 D15 D16 D16 D1 1D1 Hold Inrush Dimension In A B C D 6-1/4-1/ 6-1/4-1/4 6-/ -3/ / -1/ 9-1/ 9-/ 9-/ 5-3/ 6-3/ 5-6-3/ 5-3/4 6-3/4 6-1/ -1/ 6-3/ -3/ / -/ 2-3/4 2-3/4 2-3/4 2-3/4 2-/ 3-1/ 3-3/4 3-3/4 D(Flanged) 1# 2-/ 2-/ 3-1/ 3-1/ 4-3/ / 4-1/ 6-3/4 4-3/ 4-3/ 4-3/4 4-3/4-3/4 5-3/4 5-3/4 Voltage ( or ) UL Listed Valves - Consult Factory Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

19 BULLETIN 6-STN-Y STRAINERS Bronze Stainless Steel The presence of foreign particles in an automatic valve may seriously affect its dependability. The installation of a strainer close to the inlet side of the valve is the best means of preventing the entrance of pipe chips, scale, rust, pipe dope, welding slag or sediment into the valve, provided the screen is periodically removed for cleaning. CONSTRUCTION: Strainer bodies have screwed ends. Screens are stainless steel with opening sizes as listed in tables below. Other sizes can be furnished upon request. Liberal straining area provides for fluid passage at minimum pressure drop. Screens are easily removed for cleaning. furnished with NPT blow-off connections unplugged. See charts below for blow-off sizes (C Dim.) CLEANING FOR CRYOGENIC & OXYGEN SERVICE: Strainers for Cryogenic applications are degreased and cleaned to keep them free of moisture. Strainers for Oxygen service are degreased and cleaned then black light tested. BRONZE 1/4 TO 3 PIPE SIZE Screen Dimensions In 1/4 BR 0 3/4 2-3/4 2-1/4 1/4 3/ Mesh BR 1 3/4 2-3/4 2-1/4 1/ BR 2 3/4 2-3/4 2-1/4 1/4 3/4 Openings BR /16 3/ 1 BR 4 2-1/4 3-3/4 2-3/4 3/ 1-1/4 BR 5 3-1/4 4-/16 3-5/ 3/ Diameter BR /16 3-/ 3/4 2 Perforations BR 6-1/ 5-1/16 1 Lined With 2-30 Mesh BR / /4 3 BR /4 1- A B C STAINLESS STEEL TO 2 PIPE SIZE Screen Dimensions In Mesh SS / 1/4 3/ SS 3 2-1/4 3-3/4 2-13/16 3/ 1 Openings SS 4 3-1/4 4-5/ 3-1/ 3/ Diameter SS 6 6-3/4 5-5/ 4-3/4 3/4 Perforations 2 Lined w/30 Mesh SS A B C PRESSURE TEMPERATURE RATINGS MATERIAL STEAM LIQUIDS 0 F 0 F STAINLESS F 0 F Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 19

20 BULLETIN 6-J STAINLESS STEEL SOLENOID VALVES 0 F TYPE J - NORMALLY CLOSED 3/ TO PIPE SIZE DIRECT TING - ORIFICE SIZES 1/ TO 3/ Valve opens when energized and closes when de-energized. In this direct acting valve, when the coil is energized, the stem is lifted from its conical seat by the plunger. CONSTRUCTION: (*Wetted parts) *Valve Body Stainless Steel Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPT conduit conn. *Valve Stem Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Metal to Metal * Shading Coil - Silver *Stem Pin - Inconel Coil - Encapsulated Class H, leads FOR OPTIONS AND CESSORIES 3/ Max. Valve Port 3/ J21 5 3/16 J51 1 1/ J61 3/ J21 1 3/16 J51 1/ J61 3/ J22 5 3/16 J52 1 1/ J62 3/ J22 1 3/16 J52 1/ J62 To control the flow of Steam, Hot Liquids, Hot Gases, Cryogenics and any other fluids not reactive with construction materials and free of sidement. Cryogenic fluids include liquid oxygen (-29ºF), liquid argon(-303ºf) and liquid nitrogen (-320ºF). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Hold Inrush A Dimensions In /4 5-2-/ 2-3/ / 6-3/ 2-3/ /4 5-2-/ 2-3/ / 6-3/ 2-3/4 Optional Soft Seat Orifice Seal: (for applications requiring tight seating): Viton - Suitable for Fuel Oils, Gaseous Oxygen and other compatible fluids B C D ** CLEANING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage ( or ) 20 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

21 BULLETIN 6-JR STAINLESS STEEL SOLENOID VALVES TYPE JR - NORMALLY OPEN 3/ TO PIPE SIZE DIRECT TING - ORIFICE SIZES 1/ TO 3/ Valve closes when energized and opens when de-energized. In this direct acting valve, when the coil is energized, the stem is pressed into its conical seat by the plunger. 0 F ** CLEANING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage ( or ) 3/ CONSTRUCTION: (*Wetted parts) *Valve Body Stainless Steel Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPT conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Metal to Metal * Shading Coil - Silver *Stem Pin - Inconel Coil - Encapsulated Class H, leads To control the flow of Steam, Hot Liquids, Hot Gases, Cryogenics and any other fluids not reactive with construction materials and free of sidement. Cryogenic fluids include liquid oxygen (-29ºF), liquid argon (-303ºF) and liquid nitrogen (-320ºF). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Max. Valve Port 3/ JR21 0 3/16 JR51 1 1/ JR61 3/ JR21 1 3/16 JR51 1/ JR61 3/ JR22 0 3/16 JR52 1 1/ JR62 3/ JR22 1 3/16 JR52 1/ JR62 Hold Inrush A FOR OPTIONS AND CESSORIES Dimensions In /4 2-/ 2-3/ / -1/ 2-3/ /4 2-/ 2-3/ / -1/ 2-3/4 Optional Soft Seat Orifice Seal: (for applications requiring tight seating): Viton - Suitable for Fuel Oils, Gaseous Oxygen and other compatible fluids B C D Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 21

22 22 0 F Except valves listed for 0 FOR OPTIONS & CESSORIES 3/ Max. 1 14K42 14K32 BULLETIN 6-K STAINLESS STEEL SOLENOID VALVES TYPE K FULL PORT - NORMALLY CLOSED TO 3 PIPE SIZE Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. Hold Inrush CONSTRUCTION: (*Wetted parts - No Copper Bearing Alloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 24) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Silver *Stem Pin - Inconel Coil - Encapsulated Class H, leads To control the flow of Corrosive Fluids, Deionized Water, Condensate, Ammonias, Vegetable Oils, Fuel Oils, Cryogenics**, Flammable Liquids. Cryogenic fluids include liquid oxygen (-29ºF), liquid argon (-303ºF) and liquid nitrogen (-320ºF). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STAINLESS STEEL VALVES ARE SUPPLIED WITH FLANGED ENDS ONLY A Dimensions In FOR STEAM APPLICATIONS SEE BULLETIN 6-W Page 22 Voltage ( or ) Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 B C D NPT D (Flanged) 1# # / 2-/ 0 29K52 E29K / 4 3-1/ K / 6 2-/ K / 0 E129K K K / 3-1/4 31K / / K54 E131K K / 4 41K / K / K K /4 42K3 42K /4 5-3/ K K49F K39F1 13-3/4-6-5/ 144K59F ** CLEANING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested.

23 BULLETIN 6-KR STAINLESS STEEL SOLENOID VALVES TYPE KR FULL PORT - NORMALLY OPEN TO 3 PIPE SIZE Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. CONSTRUCTION: (*Wetted parts - No Copper Bearing Alloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 24) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Silver *Stem Pin Stainless Steel Coil - Encapsulated Class H, leads To control the flow of Corrosive Fluids, Deionized Water, Condensate, Ammonias, Vegetable Oils, Fuel Oils, Cryogenics**, Flammable Liquids. Cryogenic fluids include liquid oxygen (-29ºF), liquid argon (-303ºF) and liquid nitrogen (-320ºF). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. ** CLEANING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage ( or ) 3/ FOR STEAM APPLICATIONS SEE BULLETIN 6-WR Page 0 F Except valves listed for 0 FOR OPTIONS & CESSORIES Max. Dimensions In Hold Inrush D (Flanged) A B C D 1# # 1 14KR42 14KR / 2-/ 29KR / 0 E29KR / KR /4-1/ 2-/ 29KR KR /4-1/ 0 E129KR KR / -3/4 3-1/4 31KR / KR / 0 E131KR KR / KR / KR / 9-3/ KR KR / -1/ 42KR3 42KR / -3/ 5-3/ KR KR49F1 44KR39F / -1/ 6-5/ 9-144KR59F ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STAINLESS STEEL VALVES ARE SUPPLIED WITH FLANGED ENDS ONLY Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

24 BULLETIN 6-W STAINLESS STEEL SOLENOID VALVES 0 F TYPE W FULL PORT - NORMALLY CLOSED TO 3 PIPE SIZE Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. 3/ FOR OPTIONS & CESSORIES Max. Hold Inrush CONSTRUCTION: (*Wetted parts - No Copper Bearing Alloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 24) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Silver *Stem Pin - Inconel Coil - Encapsulated Class H, leads To control the flow of STEAM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top W22 4W / 2-/ 3-1/ W / 1 14W 4W / 6 2-/ W / 16W W24 6W / 3-1/ W / - W16 W / W W / 4-36W1 36W / W4 142W /4 44W19F1 44W29F W49F W49F A Dimensions In B C D D (Flanged) 1# 4-1/ 6-4-/ 6-5-3/ /4-6-5/ 9- ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STAINLESS STEEL VALVES ARE SUPPLIED WITH FLANGED ENDS ONLY Voltage ( or ) 24 Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0

25 BULLETIN 6-WR STAINLESS STEEL SOLENOID VALVES TYPE WR FULL PORT - NORMALLY OPEN TO 3 PIPE SIZE Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. CONSTRUCTION: (*Wetted parts - No Copper Bearing Alloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 24) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Non Asbestos Gasket *Orifice Seal - Glass Filled Teflon * Shading Coil - Silver *Stem Pin Stainless Steel Coil - Encapsulated Class H, leads 0 F To control the flow of STEAM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Voltage ( or ) 3/ Max. Hold Inrush FOR OPTIONS & CESSORIES WR22 4WR / 2-/ 3-1/ WR / 1 14WR 4WR /4-1/ 2-/ WR /4-1/ 16WR WR24 6WR / -3/4 3-1/ WR / WR16 WR / WR WR / 9-3/4 4-36WR1 36WR / -1/ WR4 142WR / -3/ 44WR19F1 44WR29F WR49F WR49F / 6-4-/ 6-5-3/ / -1/ 6-5/ 9- Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0 A Dimensions In B C D D (Flanged) 1# ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STAINLESS STEEL VALVES ARE SUPPLIED WITH FLANGED ENDS ONLY

26 BULLETIN 6-OPT OPTIONAL FEATURES For Solenoid Valves See Individual Options For Availability For Use With Specific Valve Types BOTTOM MOUNTED OPTIONS Note: Only One Bottom Mount Option Can Be Installed On Each Valve MANUAL OVERRIDE (Normally Closed valves only) (Designated by Prefix MO ) Enables manual opening of solenoid valve during power failure or to override automatic controls. DASHPOT (Designated by Prefix DP ) Furnished for clean liquids to reduce water hammer effect sometimes encountered in long pipe runs by slowing valve closing. LEVER (Normally Closed valves only) (Designated by Prefix LV ) Enables rapid opening of solenoid valve. Can be chain operated for use at inaccessible locations. FLOW CONTROL (Normally Closed, NR & MR valves, only) (Designated by Prefix FC ) Provides a manual method of reducing or throttling the flow. MOUNTING STUD (Designated by Prefix MS ) 3/ -16 thread can be furnished in bottom of body to facilitate mounting on bracket. (Not available on 2, 2- and 3 ) DRAIN (Normally Closed, NR & MR valves, only) (Designated by Prefix DR ) - 1/4 NPT plug supplied in bottom of valve to facilitate draining of liquid OTHER OPTIONS PILOT TAP (Designated by Prefix PT ) Type D, G & GR Valves can be furnished with 1/ tapped hole for pilot connection or pressure gauge. DIN CONNECTOR (Designated by Suffix DN ) Provides 3 prong connector for easy power connect / disconnect. Not available for Explosion-Proof. 26 HUM FREE : (No Hum/Buzz) (Designated by Suffix HF ) - The HUM FREE option eliminates the hum associated with operated solenoid valves. Enables valves to be used where an hum would not be acceptable and is the only power source available. IE: Hospitals, labs, schools (class rooms), homes, office environments etc. & when 24 vac is required for series valves. Leak / Dead Tight: (Normally Closed valves only) (Designated by Suffix LT ) - The Leak / Dead Tight Option offers soft resilient seating or gapless seal for low pressure applications or less. Consult Factory for Max. Pressure and Valve Type availability. Flanged Ends for Bronze and Stainless Steel Valves: (Designated by Suffix F1 for 1 lb or F3 for lb Flanges) F1 or F3 Flanged ends available on all stainless steel valves. F1 Flanged ends available on bronze valves. F3 Flanged ends for bronze valves available through our Clark-Cooper Division. Explosion-Proof and Watertight Solenoids: (Designated by Prefix F ) are Explosion-proof and NEMA 4, C & D, 9E, F & G suitable for use in hazardous locations requiring Class I, Groups C & D & Class II Groups E, F, and G equipment. NEMA 4X: (Designated by Prefix F AND Suffix ZP ) are suitable for use in locations requiring a NEMA 4X designation. ZP (Zinc Plating) replaces the standard paint used on the Coil housing (cup and base). The additional corrosion protection satisfies NEMA 4X requirements. Internal construction, pressure ratings, power consumption, and external dimensions are the same as for standard valves. Nickel Plating: (Designated by Suffix NP ) - Plating is Thick Meets Mil Spec. C24 Universal Mount Valves For Mounting In Vertical Runs (See Magnatrol Universal Mount Catalog 6-UM) Magnatrol Valve Corporation P.O. Box 1 6 Fifth Avenue Hawthorne New Jersey 0