% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

Transcription

1 .55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard ambient temperature of 9 F (65 C) Optional 76 F (8 C) high ambient temperature version Designed for use in automation of plant control systems to provide: - PLC and DCS compatibility for BUS network and traditional wiring - Reduced temperature rise - Increase battery life - Reduce wiring cost - Energy savings Wide selection includes / normally closed, 3/ normally closed (including Quick Exhaust), 3/ universal, /, 5/, and 5/3 Construction Valve Parts in Contact with Fluids Body Aluminum Brass Stainless Steel Seals and Discs PUR, NBR, FKM, CR, as listed Sleeve 3L Stainless Steel Core and Plugnut 3F Stainless Steel Core Springs 3 Stainless Steel Pilot Seat Cartridge (Series 836 & 83 only) CA Rider Rings PTFE Spring Retainer CA Electrical Description Wattage Ambient Temp. T Code Insulation Class Prefix Standard Ambient Version.55 W 9 F (65 C) T6 F - High Ambient Version.7 W 76 F (8 C) T5 H HT Surge Suppression Version.75 W 9 F (65 C) T6 F MF Description Wattage Standard Ambient Version.55W High Ambient Version.7W Surge Suppression Version.75W Min. Pull In (ma) Drop Out (ma) Coil F ( C) (ohms) Voltage (DC) V V V V** , V V V V** V 3. 65* V * 8V * 5V** 3.. 5* Note: * Surge suppression contains diode bridge. ** Not for battery applications VDC Spare Coil P/N Standard Ambient Temp. Version High Ambient Temp. Version General Purpose D TBD Explosion Proof D TBD Explosion Proof, Corrosion Resistant D TBD Explosion Proof, Surge Suppression D Not Available Explosion Proof, Corrosion Resistant, Surge Suppression D Not Available Note: For VDC, 8VDC and 5VDC coil PN consult factory R7 % ^ ) 83 Ordering Normal Ambient Version: EV855H3 VDC High Ambient Version: EF HT 836H3 VDC Surge Suppression Version: EV MF 83H3 VDC Solenoid Enclosures Standard: Watertight, Types,, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number. For explosionproof with 36 Stainless Steel hub and trim, specify prefix "EV".) Surge suppression coils also available MF prefix. See Optional Features Section for other available options. Approvals UL & CSA Approved for Class I Div. Locations & Class I Div. Non-Incendive. UL Listed General Purpose Valves. Meets applicable CE directives. SIL 3 capable per IEC 658 on 83, 836, 855, and 8553 const. Third party certification provided by EXIDA. Refer to Engineering Section for details. 5

2 / 3/ / 5/ 5/3 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp. Version 855/8553 Aluminum 5 F to 9 F (-5 C to 65 C) Brass / Stainless Steel 86 - F to 9 F (- C to 65 C) 83 Limit is the same as Normal Temperature Ratings, but High 837 Limit is 75 F (8 C) Brass / Stainless Steel 83* - F to 9 F (- C to 65 C) (Suffix V) 3 F to 9 F ( C to 65 C) *Not available in stainless steel Specifications (English units) Important These solenoids are intended for use on clean, dry air or inert gas filtered to 5 microns or better. To prevent freezing, the dew point of the media should be at least 8 F (-8 C) below the minimum temperature to which any portion of the clean air or gas system could be exposed. Instrument air in compliance with ANSI/ISA Standard S (R98) exceeds the above requirements and is, therefore, an acceptable medium for these valves. Cv Flow Factor Fluid and Ambient Temp. F Brass Body Pressure to Cylinder Cylinder to Exhaust Min. Catalog Number / VALVES, NORMALLY CLOSED, with NBR Disc Stainless Steel Body Catalog Number / / H3 8 86H386 ➅ 8 3/8 5/ H / 3/ H33 83H3 ➅ 3/ VALVES, UNIVERSAL OPERATION (Normally Closed or Normally Open) with NBR Disc PFD AVG =.77 x - / /.6.6 3/5 ➆ 9 83H3 83H3 ➅ 3/ VALVES, NORMALLY CLOSED (Closed when de-energized) with NBR Disc or FPM, as Listed PFD AVG = 9.3 x - / 5/6.5.5 ➄ H3 ➂ 3 EV836H38V ➃➅ 3 3/8 5/6.8.8 ➄ H3 ➂ 3 EV836H38V ➃➅ 3 3/8 5/8 ➄ H33 ➂ 3A - - / 5/8 ➄ H3 ➂ 3A EV836H38V ➃➅ 3A 3/ / J37 ➂ H33 ➂ / VALVES, UNIVERSAL (Normally Closed or Normally Open) "Quick Exhaust" with CR Diaphragm and NBR Disc / ➁ H H38 ➅ 7 / VALVES, Brass Body with NBR Disc Cv Flow Factor Pressure to Cylinder to Cylinder Fluid and Ambient Temp. F Single Solenoid Exhaust Min. Catalog Number Catalog Number / / H37 ➂ 9 83H3 ➂ 3/8 3/ H37 ➂ 83H38 ➂ / 3/ H37 ➂ 83H38 ➂ 3/ 3/ H376 ➂ 3 83H35 ➂ 3/ H378 ➂ 3 83H356 ➂ There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere. ➁ For "Quick Exhaust" valves, pressure port is /6", exhaust port is /". ➂ IMPORTANT: A Minimum Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted. ASCO flow controls and other similar components must be installed in the cylinder lines only. ➃ Diaphragm and main disc FKM only (pilot is low-temperature NBR). ➄ Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 5 psi Differential when selection gasket is in the internal position. ➆ Normally closed = 3 psi. Normally open = 5 psi. 6 R7

3 / 3/ / 5/ 5/3 Specifications (English units) Body Material 3/, 5/, 5/3 VALVES, with NBR and PUR Seals Aluminum 3/ Cv Flow Factor Single Solenoid PFD AVG = 3.3 x -3 Fluid Catalog Min. Temp. F Number Min. 855H35 Fluid Temp. F Catalog Number Aluminum 5/3 Center Open - 855H368 / /.86 Brass 3/ EF855H37 ➁ EF855H38 ➁ Brass 5/ EF855H39 ➁ EF855H3 ➁ L Stainless Steel 3/ EV855H33 ➂➅ EV855H3 ➂➅ 855H36 Aluminum 5/ 855H37 855H38 Aluminum 5/3 Center Closed - 855H367 36L Stainless Steel 5/ EV855H3 ➂➅ EV855H3 ➂➅ Aluminum 3/ 8553H H36 Aluminum 5/ 8553H H38 / / L Stainless Steel 3/ EV8553H33 ➂➅ EV8553H3 ➂➅ 36L Stainless Steel 5/ EV8553H3 ➂➅ EV8553H3 ➂➅ ➁ Brass construction supplied standard with EF solenoid. ➂ Stainless steel construction supplied standard with EV solenoid. Single Solenoid PFD AVG = 3.3 x -3 Cv Body Flow Fluid Catalog Material Factor Min. Temp. F Number Min. 3/, 5/, 5/3 VALVES, with NBR and PUR Seals, NAMUR Mount Aluminum 3/, 5/ 855H3 3 Fluid Temp. F Catalog Number Aluminum 5/3 Center Open / / H366 Brass 3/, 5/ EF855H33 ➁ EF855H3 ➁ 3 855H3 3 Aluminum 5/3 Center Closed H365 36L Stainless Steel 3/, 5/ EV855H39 ➂➅ EV855H3 ➂➅ Aluminum 3/, 5/ 8553H3 8553H3 / / L Stainless Steel 3/, 5/ EV8553H39 ➂➅ EV8553H3 ➂➅ /8" NPT exhaust for /" aluminum and brass. ➁ Brass construction supplied standard with EF solenoid. ➂ Stainless steel construction supplied standard with EV solenoid. R7 7

4 / 3/ / 5/ 5/3 Specifications (Metric units) (mm) Kv Flow Factor (m3/h) Fluid and Ambient Temp. C Brass Body Pressure to Cylinder Cylinder to Exhaust Min. Catalog Number / VALVES, NORMALLY CLOSED, with NBR Disc Stainless Steel Body Catalog Number / H3 8 86H386 ➅ 8 3/ H / H33 83H3 ➅ 3/ VALVES, UNIVERSAL OPERATION (Normally Closed or Normally Open) with NBR Disc PFD AVG =.77 x - / /7 ➆ 65 83H3 83H3 ➅ 3/ VALVES, NORMALLY CLOSED (Closed when de-energized) with NBR Disc or FPM, as Listed PFD AVG = 9.3 x - / ➄ H3 ➂ 3 EV836H38V ➃➅ 3 3/ ➄ H3 ➂ 3 EV836H38V ➃➅ 3 3/ ➄ H33 ➂ 3A - - / ➄ H3 ➂ 3A EV836H38V ➃➅ 3A 3/ J37 ➂ H33 ➂ / VALVES, UNIVERSAL (Normally Closed or Normally Open) "Quick Exhaust" with CR Diaphragm and NBR Disc / ➁ H H38 ➅ 7 / VALVES, with NBR Disc and Seals / H3 ➂ 6 EV835H38 ➂➅ 8 / VALVES, Brass Body with NBR Disc (mm) Kv Flow Factor (m3/h) Fluid and Ambient Temp. C Single Solenoid Pressure to Cylinder to Cylinder Exhaust Min. Catalog Number Catalog Number / H37 ➂ 9 83H3 ➂ 3/ H37 ➂ 83H38 ➂ / H37 ➂ 83H38 ➂ 3/ H376 ➂ 3 83H35 ➂ H378 ➂ 3 83H356 ➂ There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere. ➁ For "Quick Exhaust" valves, pressure port is /6", exhaust port is /". ➂ IMPORTANT: A Minimum Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted. ASCO flow controls and other similar components must be installed in the cylinder lines only. ➃ Diaphragm and main disc FKM only (pilot is low-temperature NBR). ➄ Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum. bar Differential when selection gasket is in the internal position. ➆ Normally closed = 8.8 bar / Normally open = 7 bar. 8 R7

5 / 3/ / 5/ 5/3 Specifications (Metric units) Body Material (mm) 3/, 5/, 5/3 VALVES, with NBR and PUR Seals Aluminum 3/ Kv Flow Factor (m3/h) Single Solenoid PFD AVG = 3.3 x -3 Fluid Catalog Min. Temp. C Number Min. 855H35 Fluid Temp. C Catalog Number Aluminum 5/3 Center Open - 855H368 / 6.7 Brass 3/ EF855H37 ➁ EF855H38 ➁ Brass 5/ EF855H39 ➁ EF855H3 ➁ L Stainless Steel 3/ EV855H33 ➂➅ EV855H3 ➂➅ 855H36 Aluminum 5/ 855H37 855H38 Aluminum 5/3 Center Closed - 855H367 36L Stainless Steel 5/ EV855H3 ➂➅ EV855H3 ➂➅ Aluminum 3/ 8553H H36 Aluminum 5/ 8553H H38 / L Stainless Steel 3/ EV8553H33 ➂➅ EV8553H3 ➂➅ 36L Stainless Steel 5/ EV8553H3 ➂➅ EV8553H3 ➂➅ ➁ Brass construction supplied standard with EF solenoid. ➂ Stainless steel construction supplied standard with EV solenoid. Single Solenoid PFD AVG = 3.3 x -3 Kv Flow Body Factor Fluid Catalog Material (mm) (m3/h) Min. Temp. C Number Min. 3/, 5/, 5/3 VALVES, with NBR and PUR Seals, NAMUR Mount Aluminum 3/, 5/ 855H3 3 Fluid Temp. C Catalog Number Aluminum 5/3 Center Open / ➀ H366 Brass 3/, 5/ EF855H33 ➁ EF855H3 ➁ 3 855H3 3 Aluminum 5/3 Center Closed H365 36L Stainless Steel 3/, 5/ EV855H39 ➂➅ EV855H3 ➂➅ Aluminum 3/, 5/ 8553H3 8553H3 / L Stainless Steel 3/, 5/ EV8553H39 ➂➅ EV8553H3 ➂➅ /8" NPT exhaust for /" aluminum and brass. ➁ Brass construction supplied standard with EF solenoid. ➂ Stainless steel construction supplied standard with EV solenoid. R7 9

6 / 3/ / 5/ 5/3 Dimensions: inches (mm),.5 [.3]. [9.56] 3 / NPT 3.7 [8.].7 [.7].59 [.5] M5 THREAD n3. MIN FULL THREAD DEPTH.5 `.5 MIN. TAP DRLL DEPTH PLACES.9 [3.].9 [.].9 [.] 3A R7

7 / 3/ / 5/ 5/3 Dimensions: inches (mm) A B C H K L M N P R W ins mm ins. X.78 X mm X 5 X , R7

8 / 3/ / 5/ 5/3 Dimensions: inches (mm) Dia D E F G H J K L N P W X Y Z 9 ins. Ø mm ins. Ø mm ins. Ø mm ins. Ø mm ins. Ø mm ins. Ø mm Exhaust 3/8 / / 3/8 9,,,, 3, 9 R7

9 / 3/ / 5/ 5/3 Dimensions: inches (mm) Series NPT / / L 5. (3) 6. (53) L 6.73 (7) 7.8 (98) H.38 ().77 () H. (8).58 () W.77 (5).85 (7) 3. [77].3 [5] Manual override option MH adds.5" (6.), MS option adds.68" (.9) to each solenoid endcap. H Add Suffix MO MI MH MS Optional Manual Operators Description Push and turn to lock with flat Momentary push in with flat Momentary push in by hand Push and turn to lock by hand W H 3 /8 NPT AUX. PRESSURE PORT L L Series NPT / / L 5.63 () 7.6 (8) L 7. (83) 8.86 (5) H.38 ().77 () H. (8).58 () W.77 (5).85 (7) Manual override option MH adds.5" (6.), MS option adds.68" (.9) to each solenoid endcap. H 3. [77].3 [5] 5 3 Add Suffix MO MI Optional Manual Operators Description Push and turn to lock with flat Momentary push in with flat W H /8 NPT AUX. PRESSURE PORT L L MH Momentary push in by hand MS Push and turn to lock by hand R7 3

10 / 3/ / 5/ 5/3 Dimensions: inches (mm) Series 855 (Aluminum, Brass) NPT / L.96 (6) L 6.9 (65) H.38 () H.57 () W.77 (5) Manual override option MH adds.5" (6.), MS option adds.68" (.9) to each solenoid endcap. H 3 3. [77].3 [5] /8 NPT 3 Add Suffix MO MI MH MS Optional Manual Operators Description Push and turn to lock with flat Momentary push in with flat Momentary push in by hand Push and turn to lock by hand W H /8 NPT AUX. PRESSURE PORT / NPT L L 855 NAMUR Footprint.95 ().6 (3) Series 855 (36L SS) 855 (5/3) 8553 NPT / / / L 5. (3) (8) L 6.73 (7) 7. (89) 8.85 (5) H.38 ().38 ().77 () H.57 ().57 ().8 (53) W.77 (5).77 (5).87 (73) H 3. [77].3 [5] (855) / NPT (8553) / NPT Manual override option MH adds.5" (6.), MS option adds.68" (.9) to each solenoid endcap. H 5 3 Add Suffix MO MI MH MS Optional Manual Operators Description Push and turn to lock with flat Momentary push in with flat Momentary push in by hand Push and turn to lock by hand W /8 NPT AUX. PRESSURE PORT L L 8553 NAMUR Footprint 855 NAMUR Footprint.77 (5).95 ().6 (3).57 () R7