Wide Flange Beams. Imperial Units
|
|
|
- Linda Melton
- 7 years ago
- Views:
Transcription
1 Designation Area Depth Width Thickness Root Depth Ratios for Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Metre Sect. Sect. Sect. Fillets Buckling End Notch Flange Web Clearance A D B T t r d b/t d/t C N n in (mm) lb/ft kg/m cm 2 mm mm mm mm mm mm mm mm mm W4 4 X 4 (102 x 102) W5 5 x 3 (127 x 76) W5 5 x 5 (127 x 127) W6 6 x 3 1/2 (152 x 89) W6 6 x 4 (152 x 102) W6 6 x 6 (152 x 152) W7 7 x 4 (178 x 102) W8 8 x 4 (203 x 102) W8 8 x 5 1/4 (203 x 133) W8 8 x 6 1/2 (203 x 165) W8 8 x 8 (203 x 203) W10 10 x 4 (254 x 102) W10 10 x 5 3/4 (254 x 146) W10 10 x 8 (254 x 203) W10 10 x 10 (254 x 254) sales@regencysteelasia.com.sg
2 Designation Surface Second Radius Elastic Plastic Buckling Torsional Warping Torsional Size Mass Area Moment of Modulus Modulus Parameter Index Constant Constant Per per of Area Gyration Metre Metre Axis Axis Axis Axis Axis Axis Axis Axis x-x y-y x-x y-y x-x y-y x-x y-y u x H J in (mm) lb/ft kg/m m 2 cm 4 cm 4 cm cm cm 3 cm 3 cm 3 cm 3 dm 6 cm 4 W4 4 x 4 (102 x 102) W5 5 x 3 (127 x 76) W5 5 x 5 (127 x 127) W6 6 x 3 1/2 (152 x 89) W6 6 x 4 (152 x 102) W6 6 x 6 (152 x 152) W7 7 x 4 (178 x 102) W8 8 x 4 (203 x 102) W8 8 x 5 1/4 (203 x 133) W8 8 x 6 1/2 (203 x 165) W8 8 x 8 (203 x 203) W10 10 x 4 (254 x 102) W10 10 x 5 3/4 (254 x 146) W10 10 x 8 (254 x 203) W10 10 x 10 (254 x 254) sales@regencysteelasia.com.sg 41
3 Designation Area Depth Width Thickness Root Depth Ratios For Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Metre Sect. Sect. Sect. Fillets Buckling End Notch Flange Web Clearance A D B T t r d b/t d/t C N n in (mm) lb/ft kg/m cm 2 mm mm mm mm mm mm mm mm mm W10 10 x 10 (254 x 254) W12 12 x 4 (305 x 102) W12 12 x 5 (305 x 127) W12 12 x 6 1/2 (305 x 165) W12 12 x 8 (305 x 203) W12 12 x 10 (305 x 254) W12 12 x 12 (305 x 305) sales@regencysteelasia.com.sg
4 Designation Surface Second Radius Elastic Plastic Buckling Torsional Warping Torsional Size Mass Area Moment of Modulus Modulus Parameter Index Constant Constant Per per of Area Gyration Metre Metre Axis Axis Axis Axis Axis Axis Axis Axis x-x y-y x-x y-y x-x y-y x-x y-y u x H J in (mm) lb/ft kg/m m 2 cm 4 cm 4 cm cm cm 3 cm 3 cm 3 cm 3 dm 6 cm 4 W10 10 x 10 (254 x 254) W12 12 x 4 (305 x 102) W12 12 x 5 (305 x 127) W12 12 x 6 1/2 (305 x 165) W12 12 x 8 (305 x 203) W12 12 x 10 (305 x 254) W12 12 x 12 (305 x 305) sales@regencysteelasia.com.sg 43
5 Designation Area Depth Width Thickness Root Depth Ratios For Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Metre Sect. Sect. Sect. Fillets Buckling End Notch Flange Web Clearance A D B T t r d b/t d/t C N n in (mm) lb/ft kg/m cm 2 mm mm mm mm mm mm mm mm mm W12 12 x 12 (305 x 305) W14 14 x 5 (356 x 127) W14 14 x 6 3/4 (356 x 171) W14 14 x 8 (356 x 203) W14 14 x 10 (356 x 254) W14 14 x 14 1/2 (356x368) W14 14 x 16 (356 x 406) sales@regencysteelasia.com.sg
6 Designation Surface Second Radius Elastic Plastic Buckling Torsional Warping Torsional Size Mass Area Moment of Modulus Modulus Parameter Index Constant Constant Per per of Area Gyration Metre Metre Axis Axis Axis Axis Axis Axis Axis Axis x-x y-y x-x y-y x-x y-y x-x y-y u x H J in (mm) lb/ft kg/m m 2 cm 4 cm 4 cm cm cm 3 cm 3 cm 3 cm 3 dm 6 cm 4 W12 12 x 12 (305 x 305) W14 14 x 5 (356 x 127) W14 14 x 6 3/4 (356 x 171) W14 14 x 8 (356 x 203) W14 14 x 10 (356 x 254) W14 14 x 14 1/2 (356 x 368) W14 14 x 16 (356 x 406) sales@regencysteelasia.com.sg 45
7 Designation Area Depth Width Thickness Root Depth Ratios For Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Metre Sect. Sect. Sect. Fillets Buckling End Notch Flange Web Clearance A D B T t r d b/t d/t C N n in (mm) lb/ft kg/m cm 2 mm mm mm mm mm mm mm mm mm W14 14 x 16 (356 x 406) W16 16 x 5 1/2 (406 x 140) W16 16 x 7 (406 x 178) W16 16 x 10 1/4 (406x260) W18 18 x 6 (457 x 152) W18 18 x 7 1/2 (457 x 191) W18 18 x 11 (457 x 279) W21 21 x 6 1/2 (533 x 165) W21 21 x 8 1/4 (533 x 210) sales@regencysteelasia.com.sg
8 Designation Surface Second Radius Elastic Plastic Buckling Torsional Warping Torsional Size Mass Area Moment of Modulus Modulus Parameter Index Constant Constant Per per of Area Gyration Metre Metre Axis Axis Axis Axis Axis Axis Axis Axis x-x y-y x-x y-y x-x y-y x-x y-y u x H J in (mm) lb/ft kg/m m 2 cm 4 cm 4 cm cm cm 3 cm 3 cm 3 cm 3 dm 6 cm 4 W14 14 x 16 (356 x 406) W16 16 x 5 1/2 (406 x 140) W16 16 x 7 (406 x 178) W16 16 x 10 1/4 (406 x 260) W18 18 x 6 (457 x 152) W18 18 x 7 1/2 (457 x 191) W18 18 x 11 (457 x 279) W21 21 x 6 1/2 (533 x 165) W21 21 x 8 1/4 (533 x 210) sales@regencysteelasia.com.sg 47
9 Designation Area Depth Width Thickness Root Depth Ratios For Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Metre Sect. Sect. Sect. Fillets Buckling End Notch Flange Web Clearance A D B T t r d b/t d/t C N n in (mm) lb/ft kg/m cm 2 mm mm mm mm mm mm mm mm mm W21 21 x 8 1/4 (533 x 210) W21 21 x 12 1/4 (533x311) W24 24 x 7 (610 x 178) W24 24 x 9 (610 x 229) W24 24 x 12 (610 x 305) W24 24 x 12 3/4 (610x324) W27 27 x 10 (686 x 254) W27 27 x 14 (686 x 356) W30 30 x 10 1/2 (762x267) W30 30 x 15 (762 x 381) W33 33 x 11 1/2 (838x292) sales@regencysteelasia.com.sg
10 Designation Surface Second Radius Elastic Plastic Buckling Torsional Warping Torsional Size Mass Area Moment of Modulus Modulus Parameter Index Constant Constant Per per of Area Gyration Metre Metre Axis Axis Axis Axis Axis Axis Axis Axis x-x y-y x-x y-y x-x y-y x-x y-y u x H J in (mm) lb/ft kg/m m 2 cm 4 cm 4 cm cm cm 3 cm 3 cm 3 cm 3 dm 6 cm 4 W21 21 x 8 1/4 (533 x 210) W21 21 x 12 1/4 (533 x 311) W24 24 x 7 (610 x 178) W24 24 x 9 (610 x 229) W24 24 x 12 (610 x 305) W24 24 x 12 3/4 (610 x 324) W27 27 x 10 (686 x 254) W27 27 x 14 (686 x 356) W30 30 x 10 1/2 (762 x 267) W30 30 x 15 (762 x 381) W33 33 x 11 1/2 (838 x 292) sales@regencysteelasia.com.sg 49
11 Designation Area Depth Width Thickness Root Depth Ratios For Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Metre Sect. Sect. Sect. Fillets Buckling End Notch Flange Web Clearance A D B T t r d b/t d/t C N n in (mm) lb/ft kg/m cm 2 mm mm mm mm mm mm mm mm mm W33 33 x 15 3/4 (838x400) W36 36 x 12 (914 x 305) W36 36 x16 1/2 (914 x419) W40 40x12 (1016 x 305) W40 40x16 (1016 x 406) W44 44x16 (1118 x 406) sales@regencysteelasia.com.sg
12 Designation Surface Second Radius Elastic Plastic Buckling Torsional Warping Torsional Size Mass Area Moment of Modulus Modulus Parameter Index Constant Constant Per per of Area Gyration Metre Metre Axis Axis Axis Axis Axis Axis Axis Axis x-x y-y x-x y-y x-x y-y x-x y-y u x H J in (mm) lb/ft kg/m m 2 cm 4 cm 4 cm cm cm 3 cm 3 cm 3 cm 3 dm 6 cm 4 W33 33 x 15 3/4 (838 x 400) W36 36 x 12 (914 x 305) W36 36 x16 1/2 (914 x 419) W40 40 x 12 (1016 x 305) W40 40 x 16 (1016 x 406) W44 44 x 16 (1118 x 406) sales@regencysteelasia.com.sg 51
13 Metric Units Designation Area Depth Width Thickness Root Depth Ratios For Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Sect. Sect. Sect. Fillets Buckling End Notch Metre Flange Web Clearance A D B T t r d b/t d/t C N n mm kg/m cm 2 mm mm mm mm mm mm mm mm mm 100 x x x x x x x x x x x x x x x x x x x x x sales@regencysteelasia.com.sg
14 Metric Units Designation Surface Second Radius Elastic Plastic Buckling Torsional Warping Torsional Size Mass Area Moment of Modulus Modulus Parameter Index Constant Constant Per per of Area Gyration Metre Metre Axis Axis Axis Axis Axis Axis Axis Axis x-x y-y x-x y-y x-x y-y x-x y-y u x H J mm kg/m m 2 cm 4 cm 4 cm cm cm 3 cm 3 cm 3 cm 3 dm 6 cm x x x x x x x x x x x x x x x x x x x x x sales@regencysteelasia.com.sg 53
15 Metric Units Designation Area Depth Width Thickness Root Depth Ratios For Dimensions Size Mass of of of Flange Web Radius between Local for Detailing Per Sect. Sect. Sect. Fillets Buckling End Notch Metre Flange Web Clearance A D B T t r d b/t d/t C N n mm kg/m cm 2 mm mm mm mm mm mm mm mm mm 400 x x x x x x x x x x x x sales@regencysteelasia.com.sg
5 Steel elements. 5.1 Structural design At present there are two British Standards devoted to the design of strucof tural steel elements:
5 Steel elements 5.1 Structural design At present there are two British Standards devoted to the design of strucof steelwork tural steel elements: BS 449 The use of structural steel in building. BS 5950
Eurocode 3 for Dummies The Opportunities and Traps
Eurocode 3 for Dummies The Opportunities and Traps a brief guide on element design to EC3 Tim McCarthy Email tim.mccarthy@umist.ac.uk Slides available on the web http://www2.umist.ac.uk/construction/staff/
Design of Steel Structures Prof. S.R.Satish Kumar and Prof. A.R.Santha Kumar
Problem 1 Design a hand operated overhead crane, which is provided in a shed, whose details are: Capacity of crane = 50 kn Longitudinal spacing of column = 6m Center to center distance of gantry girder
Removing chips is a method for producing plastic threads of small diameters and high batches, which cause frequent failures of thread punches.
Plastic Threads Technical University of Gabrovo Yordanka Atanasova Threads in plastic products can be produced in three ways: a) by direct moulding with thread punch or die; b) by placing a threaded metal
MECHANICAL PRINCIPLES HNC/D MOMENTS OF AREA. Define and calculate 1st. moments of areas. Define and calculate 2nd moments of areas.
MECHANICAL PRINCIPLES HNC/D MOMENTS OF AREA The concepts of first and second moments of area fundamental to several areas of engineering including solid mechanics and fluid mechanics. Students who are
MECHANICS OF SOLIDS - BEAMS TUTORIAL TUTORIAL 4 - COMPLEMENTARY SHEAR STRESS
MECHANICS OF SOLIDS - BEAMS TUTORIAL TUTORIAL 4 - COMPLEMENTARY SHEAR STRESS This the fourth and final tutorial on bending of beams. You should judge our progress b completing the self assessment exercises.
STEEL BUILDINGS IN EUROPE. Multi-Storey Steel Buildings Part 10: Guidance to developers of software for the design of composite beams
STEEL BUILDINGS IN EUROPE Multi-Storey Steel Buildings Part 10: Guidance to developers of software for the design of Multi-Storey Steel Buildings Part 10: Guidance to developers of software for the design
Lap Fillet Weld Calculations and FEA Techniques
Lap Fillet Weld Calculations and FEA Techniques By: MS.ME Ahmad A. Abbas Sr. Analysis Engineer Ahmad.Abbas@AdvancedCAE.com www.advancedcae.com Sunday, July 11, 2010 Advanced CAE All contents Copyright
VERTICAL STRESS INCREASES IN SOIL TYPES OF LOADING. Point Loads (P) Line Loads (q/unit length) Examples: - Posts. Examples: - Railroad track
VERTICAL STRESS INCREASES IN SOIL Point Loads (P) TYPES OF LOADING Line Loads (q/unit length) Revised 0/015 Figure 6.11. Das FGE (005). Examples: - Posts Figure 6.1. Das FGE (005). Examples: - Railroad
Optimising plate girder design
Optimising plate girder design NSCC29 R. Abspoel 1 1 Division of structural engineering, Delft University of Technology, Delft, The Netherlands ABSTRACT: In the design of steel plate girders a high degree
Mechanics of Materials. Chapter 5 Stresses In Beams
Mechanics of Materials Chapter 5 Stresses In Beams 5.1 Introduction In previous chapters, the stresses in bars caused by axial loading and torsion. Here consider the third fundamental loading : bending.
Sheet metal operations - Bending and related processes
Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending
Torsion Tests. Subjects of interest
Chapter 10 Torsion Tests Subjects of interest Introduction/Objectives Mechanical properties in torsion Torsional stresses for large plastic strains Type of torsion failures Torsion test vs.tension test
Stresses in Beam (Basic Topics)
Chapter 5 Stresses in Beam (Basic Topics) 5.1 Introduction Beam : loads acting transversely to the longitudinal axis the loads create shear forces and bending moments, stresses and strains due to V and
BLIND TEST ON DAMAGE DETECTION OF A STEEL FRAME STRUCTURE
BLIND TEST ON DAMAGE DETECTION OF A STEEL FRAME STRUCTURE C.J. Black< 1 >,C.E. Ventura(2) Graduate Student, < 2 > Associate Professor University of British Columbia Department of Civil Engineering
Technical Specifications BIO-BLOK 80 HD G
Technical Specifications BIO-BLOK 80 HD G Product: Type BIO-BLOK 80 HD G (80 m 2 /m 3 ). Produced by. Constructed of 8 x 8 net tubes that are subsequently welded Approx. 54 x 54 x 55 cm. 80 m 2 /m 3 in
MATERIALS AND MECHANICS OF BENDING
HAPTER Reinforced oncrete Design Fifth Edition MATERIALS AND MEHANIS OF BENDING A. J. lark School of Engineering Department of ivil and Environmental Engineering Part I oncrete Design and Analysis b FALL
Light Steel Framing (LSF) Product Information
Light Steel Framing (LSF) Product Information tel + (0) 8 8 fax + (0) 8 09 email enquiries@drywallsteelsections.co.uk web www.drywallsteelsections.co.uk tel + (0) 8 8 fax + (0) 8 09 p. Drywall Steel Sections
Structural Design Calculation For Pergola
Structural Design Calculation For Pergola Revision :5 Prepared by :EC Date : 8/10/009 CONTENTS 1. Introduction... Design Code and Reference 3. Design Synopsis 4. Design Parameters 4.1 Design Load. 4. Design
Compression Members: Structural elements that are subjected to axial compressive forces
CHAPTER 3. COMPRESSION MEMBER DESIGN 3.1 INTRODUCTORY CONCEPTS Compression Members: Structural elements that are subjected to axial compressive forces onl are called columns. Columns are subjected to axial
HOLLOWSTEELSECTIONSFOR STRUCTURALUSE-SPECIFICATION
*m d&i $Fm & Ekz tiwliwb!t+t&h--rn (FTm~) Indian Standard HOLLOWSTEELSECTIONSFOR STRUCTURALUSE-SPECIFICATION ( Second Revision ICS 77.140.75 OBIS 1997 BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR
Design of reinforced concrete columns. Type of columns. Failure of reinforced concrete columns. Short column. Long column
Design of reinforced concrete columns Type of columns Failure of reinforced concrete columns Short column Column fails in concrete crushed and bursting. Outward pressure break horizontal ties and bend
Module 5 (Lectures 17 to 19) MAT FOUNDATIONS
Module 5 (Lectures 17 to 19) MAT FOUNDATIONS Topics 17.1 INTRODUCTION Rectangular Combined Footing: Trapezoidal Combined Footings: Cantilever Footing: Mat foundation: 17.2 COMMON TYPES OF MAT FOUNDATIONS
CHAPTER 29 VOLUMES AND SURFACE AREAS OF COMMON SOLIDS
CHAPTER 9 VOLUMES AND SURFACE AREAS OF COMMON EXERCISE 14 Page 9 SOLIDS 1. Change a volume of 1 00 000 cm to cubic metres. 1m = 10 cm or 1cm = 10 6m 6 Hence, 1 00 000 cm = 1 00 000 10 6m = 1. m. Change
Foreword. This manual provides technical information for designers and contractors to design and plan the construction operation.
Foreword Foreword This manual provides technical information for designers and contractors to design and plan the construction operation. The body of the manual is split into eight distinct sections: 1.
Overview of Topics. Stress-Strain Behavior in Concrete. Elastic Behavior. Non-Linear Inelastic Behavior. Stress Distribution.
Stress-Strain Behavior in Concrete Overview of Topics EARLY AGE CONCRETE Plastic shrinkage shrinkage strain associated with early moisture loss Thermal shrinkage shrinkage strain associated with cooling
Canadian Standards Association
S6S1-10 10.10.2.2 Laterally supported members When continuous lateral support is provided to the compression flange of a member subjected to bending about its major axis, the factored moment resistance,
Design of Steel Structures Prof. S.R.Satish Kumar and Prof. A.R.Santha Kumar. Fig. 7.21 some of the trusses that are used in steel bridges
7.7 Truss bridges Fig. 7.21 some of the trusses that are used in steel bridges Truss Girders, lattice girders or open web girders are efficient and economical structural systems, since the members experience
Convert between units of area and determine the scale factor of two similar figures.
CHAPTER 5 Units of Area c GOAL Convert between units of area and determine the scale factor of two. You will need a ruler centimetre grid paper a protractor a calculator Learn about the Math The area of
CLASSIFICATION OF CROSS SECTIONS FOR STEEL BEAMS IN DIFFERENT DESIGN CODES
CLASSIFICATION OF CROSS SECTIONS FOR STEEL BEAMS IN DIFFERENT DESIGN CODES Kalju Loorits Rakenteiden Mekaniikka,Vol.28 No 1, 1995, pp. 19-33 ABSTRACT In the paper comparison of classification for!-sections
UNRESTRAINED BEAM DESIGN I
11 UNRESTRAINED BEA DESIGN I 1.0 INTRODUCTION Generally, a beam resists transverse loads by bending action. In a typical building frame, main beams are employed to span between adjacent columns; secondary
Section 16: Neutral Axis and Parallel Axis Theorem 16-1
Section 16: Neutral Axis and Parallel Axis Theorem 16-1 Geometry of deformation We will consider the deformation of an ideal, isotropic prismatic beam the cross section is symmetric about y-axis All parts
MECHANICS OF SOLIDS - BEAMS TUTORIAL 1 STRESSES IN BEAMS DUE TO BENDING. On completion of this tutorial you should be able to do the following.
MECHANICS OF SOLIDS - BEAMS TUTOIAL 1 STESSES IN BEAMS DUE TO BENDING This is the first tutorial on bending of beams designed for anyone wishing to study it at a fairly advanced level. You should judge
GUARDRAIL INNOVATION FLOWS FROM HERE
INNOVATION FLOWS FROM HERE ENSURING SAFETY ON CANADIAN HIGHWAYS The economics, versatility, and performance of Guardrail surpass all other roadside barrier systems. Guardrail provides highly-visible protection
OUTCOME 1 STATIC FLUID SYSTEMS TUTORIAL 1 - HYDROSTATICS
Unit 41: Fluid Mechanics Unit code: T/601/1445 QCF Level: 4 Credit value: 15 OUTCOME 1 STATIC FLUID SYSTEMS TUTORIAL 1 - HYDROSTATICS 1. Be able to determine the behavioural characteristics and parameters
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
Design Analysis and Review of Stresses at a Point
Design Analysis and Review of Stresses at a Point Need for Design Analysis: To verify the design for safety of the structure and the users. To understand the results obtained in FEA, it is necessary to
W i f(x i ) x. i=1. f(x i ) x = i=1
Work Force If an object is moving in a straight line with position function s(t), then the force F on the object at time t is the product of the mass of the object times its acceleration. F = m d2 s dt
DRAFTING MANUAL. Gears (Bevel and Hypoid) Drafting Practice
Page 1 1.0 General This section provides the basis for uniformity in engineering gears drawings and their technical data for gears with intersecting axes (bevel gears), and nonparallel, nonintersecting
ENGINEERING SCIENCE H1 OUTCOME 1 - TUTORIAL 3 BENDING MOMENTS EDEXCEL HNC/D ENGINEERING SCIENCE LEVEL 4 H1 FORMERLY UNIT 21718P
ENGINEERING SCIENCE H1 OUTCOME 1 - TUTORIAL 3 BENDING MOMENTS EDEXCEL HNC/D ENGINEERING SCIENCE LEVEL 4 H1 FORMERLY UNIT 21718P This material is duplicated in the Mechanical Principles module H2 and those
HOPLEYS OPENWEBSTEELJOISTS
Design Aid Manual Now also includes Letter of Certification & Bearer Span Table HOPLEYS OPENWEBSTEELJOISTS 2...has over 60 years experience and a respected reputation in Sheet Metal fabrication and associated
Design Of Reinforced Concrete Structures ii Two-Way Slabs
1. Inroduction When the ratio (L/S) is less than 2.0, slab is called two-way slab, as shown in the fig. below. Bending will take place in the two directions in a dish-like form. Accordingly, main reinforcement
Preliminary steel concrete composite bridge design charts for Eurocodes
Preliminary steel concrete composite bridge 90 Rachel Jones Senior Engineer Highways & Transportation Atkins David A Smith Regional Head of Bridge Engineering Highways & Transportation Atkins Abstract
Technical Notes 3B - Brick Masonry Section Properties May 1993
Technical Notes 3B - Brick Masonry Section Properties May 1993 Abstract: This Technical Notes is a design aid for the Building Code Requirements for Masonry Structures (ACI 530/ASCE 5/TMS 402-92) and Specifications
Screw Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
Full-Scale Load Testing of Steel Strutting System. For. Yongnam Holding Limited
Report on Full-Scale Load Testing of Steel Strutting System For Yongnam Holding Limited Prepared by Dr Richard Liew PhD, MIStrutE, CEng, PE(S pore) Department of Civil Engineering National University of
TECHNICAL DATA E-PRO COLD UNITS Refrigerated glass display units, CDDL, CDD and CDDH series
TECHNICAL DATA E-PRO COLD UNITS Refrigerated glass display units, CDDL, CDD and CDDH series The range of E-Pro cold units includes various types of refrigerated units and worktops. Thanks to the flexible
Introduction to Mechanical Behavior of Biological Materials
Introduction to Mechanical Behavior of Biological Materials Ozkaya and Nordin Chapter 7, pages 127-151 Chapter 8, pages 173-194 Outline Modes of loading Internal forces and moments Stiffness of a structure
GCSE Revision Notes Mathematics. Volume and Cylinders
GCSE Revision Notes Mathematics Volume and Cylinders irevise.com 2014. All revision notes have been produced by mockness ltd for irevise.com. Email: info@irevise.com Copyrighted material. All rights reserved;
Calculating the Surface Area of a Cylinder
Calculating the Measurement Calculating The Surface Area of a Cylinder PRESENTED BY CANADA GOOSE Mathematics, Grade 8 Introduction Welcome to today s topic Parts of Presentation, questions, Q&A Housekeeping
III. Compression Members. Design of Steel Structures. Introduction. Compression Members (cont.)
ENCE 455 Design of Steel Structures III. Compression Members C. C. Fu, Ph.D., P.E. Civil and Environmental Engineering Department University it of Maryland Compression Members Following subjects are covered:
Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied
Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied Stress and strain fracture or engineering point of view: allows to predict the
CE591 Fall 2013 Lecture 26: Moment Connections
CE591 Fall 2013 Lecture 26: Moment Connections Explain basic design procedure for moment (FR) connections Explain considerations for connections in momentresisting frames for seismic demands Describe problems
TSL Professional Services
Report For: Laboratory #: 402876-05 5375 Edgeway Drive, ALLENDALE, MI, USA Report Date: December 21, 2005 49401 Received Date: November 3, 2005 Phone: 616 875 7725 Fax: 616 875 6009 Customer P.O. #: COD
Loose steel tubes for tube and coupler scaffolds Technical delivery conditions
BRITISH STANDARD BS Loose steel tubes for tube and coupler scaffolds Technical delivery conditions The European Standard has the status of a British Standard ICS 77.140.75; 91.220 NO COPYING WITHOUT BSI
How to Design Helical Piles per the 2009 International Building Code
ABSTRACT How to Design Helical Piles per the 2009 International Building Code by Darin Willis, P.E. 1 Helical piles and anchors have been used in construction applications for more than 150 years. The
ALPERTON COMMUNITY SCHOOL MATHS FACULTY ACHIEVING GRADE A/A* EXAM PRACTICE BY TOPIC
ALPERTON COMMUNITY SCHOOL MATHS FACULTY ACHIEVING GRADE A/A* EXAM PRACTICE BY TOPIC WEEK Calculator paper Each set of questions is followed by solutions so you can check & mark your own work CONTENTS TOPIC
TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE
TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General
Solution for Homework #1
Solution for Homework #1 Chapter 2: Multiple Choice Questions (2.5, 2.6, 2.8, 2.11) 2.5 Which of the following bond types are classified as primary bonds (more than one)? (a) covalent bonding, (b) hydrogen
1.7. formulae and transposition. Introduction. Prerequisites. Learning Outcomes. Learning Style
formulae and transposition 1.7 Introduction formulae are used frequently in almost all aspects of engineering in order to relate a physical quantity to one or more others. Many well-known physical laws
MECHANICS OF SOLIDS - BEAMS TUTORIAL 2 SHEAR FORCE AND BENDING MOMENTS IN BEAMS
MECHANICS OF SOLIDS - BEAMS TUTORIAL 2 SHEAR FORCE AND BENDING MOMENTS IN BEAMS This is the second tutorial on bending of beams. You should judge your progress by completing the self assessment exercises.
Surface Area Quick Review: CH 5
I hope you had an exceptional Christmas Break.. Now it's time to learn some more math!! :) Surface Area Quick Review: CH 5 Find the surface area of each of these shapes: 8 cm 12 cm 4cm 11 cm 7 cm Find
27.3. Introduction. Prerequisites. Learning Outcomes
olume Integrals 27. Introduction In the previous two sections, surface integrals (or double integrals) were introduced i.e. functions were integrated with respect to one variable and then with respect
SEISMIC DESIGN. Various building codes consider the following categories for the analysis and design for earthquake loading:
SEISMIC DESIGN Various building codes consider the following categories for the analysis and design for earthquake loading: 1. Seismic Performance Category (SPC), varies from A to E, depending on how the
How To Factor By Gcf In Algebra 1.5
7-2 Factoring by GCF Warm Up Lesson Presentation Lesson Quiz Algebra 1 Warm Up Simplify. 1. 2(w + 1) 2. 3x(x 2 4) 2w + 2 3x 3 12x Find the GCF of each pair of monomials. 3. 4h 2 and 6h 2h 4. 13p and 26p
GUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
Modeling Beams on Elastic Foundations Using Plate Elements in Finite Element Method
Modeling Beams on Elastic Foundations Using Plate Elements in Finite Element Method Yun-gang Zhan School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang,
1 cm 3. 1 cm. 1 cubic centimetre. height or Volume = area of cross-section length length
Volume Many things are made in the shape of a cuboid, such as drink cartons and cereal boxes. This activity is about finding the volumes of cuboids. Information sheet The volume of an object is the amount
Understanding Plastics Engineering Calculations
Natti S. Rao Nick R. Schott Understanding Plastics Engineering Calculations Hands-on Examples and Case Studies Sample Pages from Chapters 4 and 6 ISBNs 978--56990-509-8-56990-509-6 HANSER Hanser Publishers,
Structural Integrity Analysis
Structural Integrity Analysis 1. STRESS CONCENTRATION Igor Kokcharov 1.1 STRESSES AND CONCENTRATORS 1.1.1 Stress An applied external force F causes inner forces in the carrying structure. Inner forces
MCE380: Measurements and Instrumentation Lab. Chapter 9: Force, Torque and Strain Measurements
MCE380: Measurements and Instrumentation Lab Chapter 9: Force, Torque and Strain Measurements Topics: Elastic Elements for Force Measurement Dynamometers and Brakes Resistance Strain Gages Holman, Ch.
Series 4000 Fiberglass Pipe and Fittings
Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service Uses and applications Listings Performance Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing
HUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast prestressed hollow core slabs
HUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast Anchor version HUS-A 6 Screw with hex head HUS-H 6 Screw with hex head HUS-I 6 Screw with hex head Benefits - Quick and easy setting - Low
APOLLO SALES LTD SITE SCAFFOLD STEP DESIGN CHECK CALCULATIONS
Alan White Design APOLLO SALES LTD SITE SCAFFOLD STEP DESIGN CHECK CALCULATIONS Alan N White B.Sc., M.Eng., C.Eng., M.I.C.E., M.I.H.T. Feb 2014 Somerset House 11 Somerset Place GLASGOW G3 7JT Tel:0141
Creating a 2D Geometry Model
Creating a 2D Geometry Model This section describes how to build a 2D cross section of a heat sink and introduces 2D geometry operations in COMSOL. At this time, you do not model the physics that describe
Terminal Box. Specifications TNCN
Terminal box The /TNCC range comprises many standard sizes of enclosures manufactured in stainless steel 316L for maximum environmental protection. The main body is manufactured from minimum 1,5 mm sheet
Reinforced Concrete Slab Design Using the Empirical Method
Reinforced Concrete Slab Design Using the Empirical Method BridgeSight Solutions for the AASHTO LRFD Bridge Design Specifications BridgeSight Software TM Creators of effective and reliable solutions for
Chapter 17: Springs. Fundamentals of Machine Elements, 3 rd ed. Schmid, Hamrock and Jacobson. 2014 CRC Press
Chapter 17: Springs It must be confessed that the inventors of the mechanical arts have been much more useful to men than the inventors of syllogisms. Voltaire A collection of helical compression springs.
Aluminium systems profile selection
Aluminium systems profile selection The purpose of this document is to summarise the way that aluminium profile selection should be made, based on the strength requirements for each application. Curtain
Introduction to Beam. Area Moments of Inertia, Deflection, and Volumes of Beams
Introduction to Beam Theory Area Moments of Inertia, Deflection, and Volumes of Beams Horizontal structural member used to support horizontal loads such as floors, roofs, and decks. Types of beam loads
General Allowances for Insulation & Cladding
TRADE OF Industrial Insulation PHASE 2 Module 1 Sheet Metal and Insulation Fundamentals UNIT: 4 General Allowances for Insulation & Cladding Produced by In cooperation with subject matter expert: Michael
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
Comparative Study of Steel Structures Design Using IS 800:1984 & IS 800:2007
International Journal of Scientific & Engineering Research, Volume 4, Issue 4, April-2013 810 Comparative Study of Steel Structures Design Using IS 800:1984 & IS 800:2007 Prof. S.S.Patil, L.A.Pasnur Abstract
Green Thread Product Data
Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using
3d space container challenge
3d space container challenge Design guidelines Here are some guidelines to keep in mind when designing your Space Container. We understand that making a 3D model is tough for beginners! We encourage participation
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
H1 Axial Piston Pump, Size 078, Single Technical Information Dimensions
Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24
UNIT 1 MASS AND LENGTH
UNIT 1 MASS AND LENGTH Typical Units Typical units for measuring length and mass are listed below. Length Typical units for length in the Imperial system and SI are: Imperial SI inches ( ) centimetres
Gear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
VOLUME AND SURFACE AREAS OF SOLIDS
VOLUME AND SURFACE AREAS OF SOLIDS Q.1. Find the total surface area and volume of a rectangular solid (cuboid) measuring 1 m by 50 cm by 0.5 m. 50 1 Ans. Length of cuboid l = 1 m, Breadth of cuboid, b
www.mathsbox.org.uk Displacement (x) Velocity (v) Acceleration (a) x = f(t) differentiate v = dx Acceleration Velocity (v) Displacement x
Mechanics 2 : Revision Notes 1. Kinematics and variable acceleration Displacement (x) Velocity (v) Acceleration (a) x = f(t) differentiate v = dx differentiate a = dv = d2 x dt dt dt 2 Acceleration Velocity
CH 6: Fatigue Failure Resulting from Variable Loading
CH 6: Fatigue Failure Resulting from Variable Loading Some machine elements are subjected to static loads and for such elements static failure theories are used to predict failure (yielding or fracture).
Camber, The unkind Curve
Camber, The unkind Curve Understand how Camber can be handled in a typical Tube Mill: By W.B. Bud Graham, Contributing Writer Ok, were going to talk about curves. Not the one seen in a ball game but the
PLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE
20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High
Sheet Metal Bending. By- Prem Mahendranathan
Sheet Metal Bending By- BENDING n Bending is a manufacturing process by which a metal can be deformed by plastically deforming the material and changing its shape n Deformation about one axis PROFILES
REVIEW PROBLEMS & SOLUTIONS JAMES M. GERE BARRY J. GOODNO
REVIEW ROEMS & SOUTIONS JMES M. GERE RRY J. GOODNO ppendix FE Exam Review roblems R-1.1: plane truss has downward applied load at joint and another load applied leftward at joint 5. The force in member
SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY
BS 40 M6 MuCis mono SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY LE CE LE type: "expansive binder which allows the production of extremely fluid concrete
APPENDIX A PRESSUREMETER TEST INTERPRETATION
APPENDIX A PRESSUREMETER TEST INTERPRETATION PRESSUREMETER TEST INTERPRETATION Description of test The pressuremeter test, discussed in great detail by Martin (1977), Baguelin et al. (1978), Barksdale
Units of Measurement: A. The Imperial System
Units of Measurement: A. The Imperial System Canada uses the metric system most of the time! However, there are still places and occasions where the imperial system of measurement is used. People often
Problem Set V Solutions
Problem Set V Solutions. Consider masses m, m 2, m 3 at x, x 2, x 3. Find X, the C coordinate by finding X 2, the C of mass of and 2, and combining it with m 3. Show this is gives the same result as 3