L01 Series Direct Solenoid Actuated Valves

Transcription

1 Series Direct Solenoid ctuated Valves

2 Table of Contents L0 Series Technical and Operating Data 3 How to Order 4 Valve Dimensions 5 Manifold ssembly 6 Speed Control Kit 7 Mounting Kit 7 Blank Station Plate Kit 7 Solenoid Capsule ssemblies 7 Valve Service Kits and Parts 8-9

3 4 ed, and 3 position, 4-way, Spool & Sleeve Cv: 0.0 Direct solenoid actuated DIN plug-in solenoid with indicator light Unlubricated or lubricated service Integral speed control available In-line or manifold mounted Designed to meet the requirements of NEM 4 / IP65 Technical Data Valve Data English Metric Cv /8 = 0.0 /8 G Tap = 0.0 Flow Capacity Operating Pressure Range Temperature Range (mbient) 9.3 SCFM 97 NI/m Upstream pressure to PSIG 8 Hg Vacuum to 50 PSIG -0 F to bar upstream/5 bar downstream Vacuum to 0 bar -3 C to +46 C single solenoid position 4-way double solenoid 3 position 4-way open center 4 4 double solenoid position 4-way 4 4 double solenoid 3 position 4-way closed center double solenoid, spring centered 3 position 4-way pressure center Operating Data ll Solenoids re Continuous Duty Rated VDC 4 VDC 4 VC 50 Hz 4 VC 60 Hz 5 VC 50 Hz 0 VC 60 Hz 30 VC 50 Hz Power (Watts) VC 60 Hz Holding Current (mps.) Inrush Current (mps.) N/ N/ Energize in seconds De-energize in seconds -Position, Single, Spring Return Position, Double, Detented Position, Spring Centered Position, Single, Spring Return Position, Double, Detented N/ N/ N/ N/ N/ N/ N/ N/ 3-Position, Spring Centered

4 How to Order Valves L0 SS 4 59 B Valve Series & Size L0 = /8 Valve S = Single Direct Solenoid, Spring Return W/Flush Non-locking Override SS = Double Direct Solenoid w/flush Non-locking Override Function 4 = Position, 4-Way 5 = 3 Position, 4-Way Open Center 6 = 3 Position, 4-Way Closed Center 7 = 3 Position, 4-Way Pressure Center Mounting 59 = Line Mounted, Common Exhaust 87 = 59 w/speed Control Voltage 0 = 4/50-60 VC 30 = 0-0/50-60 VC 40 = 0-40/50-60 VC 60 = VDC 6 = 4 VDC Options B = Flush Locking Override Z = Extended Locking Override 3 = 48" Leads 7N = DC Solenoid W/Surge Suppression Diode 8D = Side s 0 = NPTF G = G Tap Wiring Option = Din Plug-in C Solenoid 4 = Din Plug-in DC Solenoid O = Hardwired C B = Hardwired DC NOTE: Plug connector is NOT included with DIN solenoid. Order plug-in connector assembly separately (see ordering information below) Plug connector assemblies Per DIN Spec. NO ccepts cable diameter 0.40 to 0.30 mm Industry Standard DIN Form B B C Manifold ssembly D E F Normal Polarity = (+) Positive, High = (-) Negative, Neutral = Chassis Ground K 0 E 0000 N STD Plug Connector Descripiton Grey (4 end solenoid) Plug ssembly Black ( end solenoid) Plug ssembly Plug ssembly with 4 V Light Plug ssembly with 0 V Light Plug ssembly with 0 V Light Dimensions: Inches (mm) B C D E F. (8.4) 0.83 (.).57 (39.9) 0.40 (0.).0 (7.9) 0.06 (.5) Electrical/Electronics & Location 0 = Standard Valve Line = L0 Series Options STD = N = NPTF G = G tap Standard 4 Number of Valve Stations B = F = 6 J = 0 C = 3 G = 7 K = D = 4 H = 8 L = E = 5 I = 9 End Plate Size = /4 Example order: List in order, left to right, facing cylinder ports ssembly Kit: K0C0000NSTD Station LOSS Station LOSS Station 3 LOS SSEMBLED

5 Dimensions: Inches (mm) Valve Position /8 NPTF or G /8 s (4) 7/64 dim. N B C F E D J I H G Single Solenoid L0S4 Double Solenoid L0SS4 K L M Speed control shown in phantom B C D E F G H I J K L M N position valves 0.3 (7.9) 0.97 (4.6) 0.49 (.4) 0.59 (5.0).9 (30.).33 (59.).30 (58.4) 3.4 (79.8) 4.60 (6.8).35 (34.3) 0.4 (0.7) 0.90 (.9).08 (7.4) 0. (.8) Valve 3 Position /8 NPTF or G /8 s (4) 7/64 dim. N B C E D F J I G K L M Speed control shown in phantom B C D E F G H I J K L M N 3 position valves 0.3 (7.9) 0.97 (4.6) 0.49 (.4) 0.59 (5.0).9 (30.).33 (59.).37 (60.) 3.4 (79.8) 4.86 (3.4).35 (34.3) 0.4 (0.7) 0.90 (.9).08 (7.4) 0. (.8) 5

6 Dimensions: Inches (mm) Manifold ssembly Common Supply and Exhaust /4 NPTF or G /4 ports () (Both Ends) B I C D E F H J 3-position L0SS5 G K K -position L0SS4 L /8 NPTF or G/8 Cylinder s M O P N B C D E F G H I J K L See table below See table below 0.9 (3.) 0.45 (.4) 4.86 (3.9).69 (4.9) 0.84 (.3) 0.6 (5.7) 3.4 (79.7) 4.60 (6.8) 0.0 (5.).0 (7.9) Manifold # Stations Stations 3 Stations 4 Stations 5 Stations 6 Stations 7 Stations Dim Dim B /4 NPTF G /4.84 (7.) 3.94 (00) 5.03 (7.7) 6.3 (55.7) 7.3 (83.6) 8.3 (.3).53 (64.3) 3.63 (9.) 4.7 (9.9) 5.8 (47.8) 6.9 (77.5) 8.0 (03.5) Manifold # Stations 8 Stations 9 Stations 0 Stations Stations Stations Dim Dim B /4 NPTF G /4 9.4 (39.3) 0.5 (67.0).6 (94.9).7 (3.8) 3.80 (350.5) Mounting Kit (3.4) 0.0 (59.).30 (87.0).39 (34.7) 3.49 (34.6) Order () mounting kit for each station on the manifold. Includes all studs, seals & screws. 6

7 Speed Control Kit - Side Mounted * Speed Control Body (not sold separately) 6 C * Gasket * 4 Screw ssembly * Metering Screw * Pin * O-Ring Seal * Screw *Indicates parts included in kit B Dimensions: Inches (mm) B C 0.30 (7.6). (3.0).35 (34.3) Mounting Kit Blank Station Plate Kit Screw Screw Mounting Stud O-Ring 6-07 O-Ring Seal 6-06 Screw Blank Station Plate (not sold separately) Solenoid Capsule ssemblies (Flush Non-Locking Override) Override Valve Function Wiring Option /4 End Flush nonlocking override (standard) Includes solenoid and end cap assembly + screws and gaskets. 00-5/50 0-0/60 Voltage C 00-30/ /60 4/50-60 VDC 4 VDC Stations Hardwired / Stations DIN plug-in / Stations Hardwired end Stations Hardwired 4 end Stations DIN plug-in end Stations DIN plug-in 4 end DC 7

8 Valve Service Kits and Parts Kit L0-K* (For Model L0S4) Spring Cover Screw Top Plate Nameplate -57 5* Gasket Screw Lockwasher Solenoid ssembly (/4) See p. 7 9* Spring * Bumper 4-30 * O-Ring Seal 6-34 Sleeve ssembly w/seals * 6 Seals Vlave Body (not sold separately) 5* Detent Body 0-09 Kit L0-K* (For Model L0SS4) Valve Body (not sold separately) Top Plate Nameplate -57 4* Gasket Screw Lockwasher Solenoid ssembly (/4) See p. 7 8* O-Ring Seal * Bumper Sleeve ssembly w/seals * 6 Seals 6-33 * Detent ssembly 0-8 *Indicates parts included in service kit. **Spool and sleeve assemblies sold as precision matched set and include (6) #6-33 seals; spools are not interchangeable.

9 Valve Service Kits and Parts Kit L0-K3* (For Model L0SS5) Solenoid ssembly ( End) See p. 7 daptor Valve Body (not sold separately) 4 Top Plate Nameplate -57 6* Gasket Screw Lockwasher Solenoid ssembly (4 End) See p. 7 0* Spring Retainer * Spacer * Spring 5-9 3* Spring Retainer Sleeve ssembly w/seals ** * 6 Seals * Bumper 4-7 7* 3 O-Ring Seals 6-34 Kit L0-K3* (For Model L0SS6) Solenoid ssembly ( End) See p. 7 daptor Valve Body (not sold separately) Top Plate Nameplate -57 6* Gasket Screw Lockwasher Solenoid ssembly (4 End) See p. 7 0* Spring Retainer * Spacer * Spring 5-9 3* Spring Retainer Sleeve ssembly w/seals ** 5* 6 Seals * Bumper 4-7 7* 3 O-Ring Seals 6-34 *Indicates parts included in service kit. **Spool and sleeve assemblies sold as precision matched set and include (6) #6-33 seals; spools are not interchangeable. 9

10 World Class Supplier of Pneumatic Components World Headquarters US Numatics, Incorporated 4680 Dylan Drive Novi, Michigan P: F: Canada Numatics, Ltd P: F: México - scomatica S de CV P: (DF y rea metropolitana) P: SCO (76) (Interior de la República) F: Brazil scoval Ind.e Comercio Ltda P: (55) F: (55) LT-L0Series Rev 06/ 0M-IPC-0/09 Numatics, Inc. Tel (48) [email protected] Numatics Inc Numatics is registered in the United States and elsewhere