NEW. Series SV27 Sensing Valves Series SV27 PO Check Category 2 &3 Safety Applications Preassembled Wiring Kits

Transcription

1 NEW Series SV7 Sensing Valves Series SV7 PO heck ategory & Safety pplications Preassembled Wiring Kits Manufacturers of Premium Pneumatic ontrols since 9 ROSS ONTROLS ROSS ONTROLS ROSS ONTROLS

2 New Product Information Series SV7 Sensing Valves / & / Normally losed with Position & State Sensing Feedback for ategory Safety pplications ir Dump/Release Solenoid Pilot ontrolled / / Pressure ontrolled / Sensing Valve (solenoid model shown) / / Schematics shown for / and ¼ bodies.* EN 9-, ISO 89-, & S0- (/ bodies only, other sizes approval pending) GENERL: STNDRD SPEIFITIONS: Pilot Solenoid: Rated for continuous duty. Standard Voltages: 00 0 volts 0 Hz; 00 0 volts 60 Hz;, 0 volts D. Other voltages available. Power onsumption: 87 V inrush, 0 V holding on 0 or 60 Hz; watts on D. mbient Temperature: 0 to 0 F ( to 0 ). Media Temperature: 0 to 7 F ( to 80 ). Flow Media: Filtered air. Inlet Pressure: 0 to 0 psig (.8 to 0 bar). Pilot Pressure: Equal to or greater than inlet pressure. Switch urrent/voltage Max.:. /0 volts. Switch urrent/voltage Min.: 0 m/ volts D. NOTE: Electrical life of switch varies with conditions and voltage; rated in excess of million cycles. ROSS new Series SV7 Sensing Valves, based upon the proven Series 7 valve family, combine the tough, dirt tolerant characteristics of poppet technology with sensing for actual internal position and state. Electrical feedback is provided via a positively-driven, safety-rated DPST (Double-Pole Single-Throw) switch with both normally open (NO) and normally closed (N) contacts. *For / and ¼ bodies, the DPST switch is actuated whenever the valve is not in the normal home position. For size body, the DPST switch is only actuated whenever the valve IS in the normal home position. n optional visual pressure indicator (9880) or pressure switch kit (60886) can be installed into the /8 NPT pressure verifi cation port (PV) for verifi cation of pressure release. FETURES: Solenoid pilot and pressure controlled versions Senses poppet position & state Electrical feedback via DPST switch (Double-Pole Single-Throw) Directly operated safety-rated force-guided status switch (DPST) Positive-break on / and ¼ body valves Poppet construction for near zero leakage & high dirt tolerance pplications include ir Dump and Trapped-Pressure Release

3 Solenoid Pilot ontrolled Models Model Numbers* Valve Port Size v Dimensions inches (mm) Weight Function, - - lb (kg) SV7N007PS** / / () 9.6 (). (77). (.0) SV7N007PS** / / () 9.6 (). (77). (.0) SV7N0607PS** / () 9.6 (). (77). (.0) SV7N007PS** / / 7.7 N/.7 () 9. (). (77).6 (.) SV7N007PS** / / 9.0 N/.7 () 9. (). (77).6 (.) SV7N0607PS** / 9.0 N/.7 () 9. (). (77).6 (.) SV7N07607PS** / ½ 6.8 (7).0 (0).9 () 7.8 (.) SV7N07707PS** / ¼ ½ (7).0 (0).9 () 7.8 (.) SV7N07807PS** / ½ ½ (7).0 (0).9 () 7.8 (.) SV7N07607PS** / N/ 6.8 (7).0 (0).9 () 8. (.7) SV7N07707PS** / ¼ 9 N/ 6.8 (7).0 (0).9 () 8. (.7) SV7N07807PS** / ½ 9 N/ 6.8 (7).0 (0).9 () 8. (.7) Pressure ontrolled Models SV7N00S / / () 6. (6).6 (9). (.) SV7N00S / / () 6. (6).6 (9). (.) SV7N060S / () 6. (6).6 (9). (.) SV7N00S / / 7.7 N/.7 () 6. (). (79). (.6) SV7N00S / / 9.0 N/.7 () 6. (). (79). (.6) SV7N060S / 9.0 N/.7 () 6. (). (79). (.6) SV7N0760S / ½ 6.8 (7) 8.8 ().9 () 6. (.9) SV7N0770S / ¼ ½ (7) 8.8 ().9 () 6. (.9) SV7N0780S / ½ ½ (7) 8.8 ().9 () 6. (.9) SV7N0760S / N/ 6.8 (7) 8.7 (0). (0) 6.7 (.0) SV7N0770S / ¼ 9 N/ 6.8 (7) 8.7 (0). (0) 6.7 (.0) SV7N0780S / ½ 9 N/ 6.8 (7) 8.7 (0). (0) 6.7 (.0) *NPT port threads. For SPP threads, replace N in the model number with a D. ** =0 volts 60 Hz, solenoids. For 0 volts 60 Hz, change to ; for volts 60 Hz, change to ; for volts D, change to D. / Solenoid Pilot ontrolled Model / Solenoid Pilot ontrolled Model -pin Mini Port Y- (pilot exhaust) -pin M Port X- (/8 external -pin Mini Port Y- (pilot exhaust) X O 0. (8.0) Port X- (/8 external X O 0. (8.0) Port (exhaust) -pin M Port [Port (outlet on opposite site] Port [Port (outlet on opposite site] / Pressure ontrolled Model / Pressure ontrolled Models / Signal Port / Signal Port -pin M X O 0. (8.0) / Signal Port / Signal Port -pin M X O 0. (8.0) Port (exhaust) Port [Port (outlet on opposite site] Port [Port (outlet on opposite site] ROSS ONTROLS

4 Solenoid Pilot ontrolled Models Model Numbers* Valve Port Size v Dimensions inches (mm) Weight Function, - - lb (kg) SV7N09807PS** / ½ ½ (9).8 (00) 6. (6) 8. (8.) SV7N09907PS** / ½ (9).8 (00) 6. (6) 8. (8.) SV7N0997PS** / ½ ½ (9).8 (00) 6. (6) 8. (8.) Pressure ontrolled Models SV7N0980S / ½ ½ (9).8 (00) 6. (6) 7. (7.8) SV7N0990S / ½ (9).8 (00) 6. (6) 7. (7.8) SV7N099S / ½ ½ (9).8 (00) 6. (6) 7. (7.8) *NPT port threads. For SPP threads, replace N in the model number with a D. ** =0 volts 60Hz, solenoids. For 0 volts 60 Hz, change to ; for volts 60 Hz, change to ; for volts D, change to D. / Solenoid Pilot ontrolled Models Port (exhaust) Port [Port (outlet on opposite site] Port X- (/8 external -pin M X O 0. (.) -pin Mini / Pressure ontrolled Models /8 Signal Port PV Port (exhaust) Port [Port (outlet on opposite site] X O 0. (.) -pin M Wiring Kits These kits are available in lengths of or 0 meters, with a cord grip on each cable. The kits for SV7 solenoid pilot controlled models come with cables; one with a -pin MINI for the solenoid and one with a -pin M (Micro) for the sensing switch. The kits for the pressure controlled models include only one cable with a -pin M for the sensing switch. (Note: Each cable has one.) PIN Solenoid able with -pin MINI onnector PIN (GROUND) PIN Sensing Switch able with -pin M onnector for / and ¼ bodies. LK PIN PIN LK urrent/voltage Max.. /0 V PIN PIN PIN Sensing Switch able with -pin M onnector for inch body. LK PIN PIN urrent/voltage Max.. /0 V PIN PIN PIN Kit Number Valve Type Length (meters) No. of ables 9H77 Solenoid Pilot 0H77 Solenoid Pilot 0 H77 ir Pilot H77 ir Pilot 0 *For / and ¼ inch bodies, the DPST switch is actuated whenever the valve is not in the normal home position. For inch bodies, the DPST switch is only actuated whenever the valve is in the normal home position.

5 Optional Pressure Switch Kit (60886) Schematic Note: Pressure switch closes on falling pressure of psig. Integrated Double-Pole Single-Throw Switch (DPST) Switch States for / and ¼ bodies Switch States for inch body General Illustration Safety-Related pplications ROSS ontrols is the leader in safety-related pneumatic products. Shown here are a few examples of the variety of ROSS safetyrelated products and their applications. Please contact us if you are interested in or confused about safety for your pneumatically operated equipment. ROSS Safety-Related pplications * ylinder hazard in directions * Pinch points * Tooling or product damage * Single point Lockout * Press clutch/brake * ounterbalance * Monitored power systems * Partial de-energization * Vertical loads * ylinder hazard -Way ontrol Reliable Double Valve L-O-X at lternative Method LOTO at lternative Method LOTO Referenced Standards: ll standards are subject to revision. Parties are encouraged to investigate and apply the most recent editions of the standards indicated below. OSH 9 FR 90.7 S Z-0 S Z60-0 ISO 89- ISO 8:000 EN 07 NSI/SSE Z.- 00 NSI/PMMI ROSS EUROP GmbH Germany Fax: info@rosseuropa.com ROSS ONTROLS U.S.. ustomer Svs GET-ROSS Technical Svs TEK-ROSS ROSS SI K.K. Japan Fax: custsvc@rossasia.co.jp ROSS UK Ltd. United Kingdom Fax: sales@rossuk.co.uk WRRNTY and UTIONS Standard ROSS warranty and cautions apply, available upon request or at ROSS ONTROLS INDI Pvt. Ltd. India Fax: rossindia@airtelbroadband.in -Way SV7 Sensing Valve ROSS SOUTH MERI Ltda. razil Fax: vendas@ross-sulamerica.com.br EEZ-ON DIMFLUID s.a.s. France Fax: dimafluid@dimafluid.com Redundant PO heck PO heck DISLIMER These circuits are illustrative only and not intended to be used literally for your application. Each machine is unique and has individual characteristics that must be considered when designing a safety circuit. In addition, the referenced standards are not an exhaustive list. There may be many additional local, state, national, and international standards as well as machine function specifi c standards pertinent to your machine. This document is not a substitute for a complete risk assessment of a machine s hazards, professional circuit design or acquiring an in depth understanding of standards/regulations relevant to an application or machine. ROSS ONTROLS (HIN) Ltd. hina Fax: alvinzhurong@vip.6.com Printed in the U.S.. Rev. / ROSS ONTROLS. ll Rights Reserved. Form NPS79

6 New Product Information Sensing Valves PO heck Solenoid Pilot ontrolled Pressure ontrolled / Signal port /8 PV /8 EPS /8 PV Series SV7 Sensing Valves Pilot Operated heck Solenoid Pilot ontrolled and Pressure ontrolled ategory & Safety pplications Load Holding V V Sensing Valves Redundant PO heck Solenoid Pilot ontrolled /8 EPS /8 PV /8 EPS /8 PV V Sensing Valve PO heck Pressure ontrolled Sensing Valve Redundant PO heck Pressure ontrolled Pressure ontrolled / Signal port / Signal port /8 PV /8 PV EN 9-, ISO 89-, & S0- (/ bodies only, other sizes approval pending) STNDRD SPEIFITIONS: Solenoid: or D power. Rated for continuous duty. Standard Voltages: 0 volts, 0/60 Hz; volts D. Other voltages available. Power onsumption: NOMO Style: V inrush, 8. V holding on 0 or 60 Hz; 6 watts on D. Pacer Style: 87 V inrush, 0 V holding on 0 or 60 Hz; watts on D. mbient Temperature: 0 to 0 F ( to 0 ). Media Temperature: 0 to 7 F ( to 80 ). Flow Media: Filtered air micron recomended. Inlet Pressure: 0 to 0 psig (.8 to 0 bar). Pilot Pressure: Equal to or greater than inlet pressure. Switch urrent/voltage Max.:. /0 volts. Switch urrent/voltage Min.: 0 m/ volts D. NOTE: Electrical life of switch varies with conditions and voltage; rated in excess of million cycles. V GENERL: ROSS new Series SV7 Sensing Valves Pilot Operated heck, based upon the proven Series 7 valve family, combine the tough, dirt tolerant characteristics of poppet technology with sensing for actual internal position and state. Electrical feedback is provided via a positively-driven, safety-rated DPST (Double- Pole Single-Throw) switch with both normally open (NO) and normally closed (N) contacts. The DPST switch is actuated whenever the valve is not in the normal home position. n optional visual pressure indicator (9880) or pressure switch kit (60886) can be installed into the /8 NPT pressure verifi cation port (PV) for verifi cation of pressure release. FETURES: Pressure controlled and solenoid pilot controlled versions. Poppet construction for near zero leakage & high dirt tolerance. Directly operated safety-rated force-guided positive-break status switch (DPST). Holds a vertical load in the event of loss of air pressure (and electrical power with solenoid pilot operated models).

7 Sensing Valves PO heck Solenoid Pilot ontrolled Models (NOMO Style) Model Numbers* Port Size v Dimensions inches (mm) Weight, - lb (kg) SV7N08S** /..0 (7) 8. (). (8).0 (.) SV7N08S** / 8..0 (7) 8. (). (8).0 (.) SV7N608S** 0..0 (7) 8. (). (8).0 (.) Pressure ontrolled Models SV7N0S /..0 (7) 6. (). (8).0 (.8) SV7N0S / 8..0 (7) 6. (). (8).0 (.8) SV7N60S 0..0 (7) 6. (). (8).0 (.8) *NPT port threads. For SPP threads, replace N in the model number with a D, e.g. SV7D08S. ** =0 volts 60 Hz solenoids. For volts D change to D. Solenoid Pilot ontrolled Model (NOMO Style) Pressure ontrolled Model X O 0.6 (6.7) Port Port X- (/8 external -pin M / Signal port / Signal port X O 0.6 (6.7) -pin M Port Port Port Solenoid Pilot ontrolled Models ( Pacer Style) Model Numbers* Port Size v Dimensions inches (mm) Weight, - lb (kg) SV7N7608S** 0.7 ().8 (99).8 (99). (.6) SV7N7708S** ¼ 9.7 ().8 (99).8 (99). (.6) SV7N7808S** ½.7 ().8 (99).8 (99). (.6) Pressure ontrolled Models SV7N760S 0.7 () 8.6 (8).8 (99).0 (.0) SV7N770S ¼ 9.7 () 8.6 (8).8 (99).0 (.0) SV7N780S ½.7 () 8.6 (8).8 (99).0 (.0) *NPT port threads. For SPP threads, replace N in the model number with a D, e.g. SV7D7608S. ** =0 volts 60 Hz solenoids. For volts D change to D. Solenoid Pilot ontrolled Model (Pacer Style) Pressure ontrolled Model Port Y- (pilot exhaust) -pin Mini / Signal port / Signal port X O 0. (.) X O 0. (.) Port Port X- (/8 external -pin M Port Port -pin M Port ROSS ONTROLS

8 Sensing Valves Redundant PO heck Solenoid Pilot ontrolled Models (NOMO Style) Model Numbers* Port Size v Dimensions inches (mm) Weight, - lb (kg) SV7N08S** /.8 8. (). (). (8) 0.0 (.) SV7N08S** /.6 8. (). (). (8) 0.0 (.) SV7N608S** 8 8. (). (). (8) 0.0 (.) Pressure ontrolled Models SV7N0S /.8 8. () 8. (). (8) 9.0 (.) SV7N0S /.6 8. () 8. (). (8) 9.0 (.) SV7N60S 8 8. () 8. (). (8) 9.0 (.) *NPT port threads. For SPP threads, replace N in the model number with a D, e.g. SV7D08S. ** =0 volts 60 Hz solenoids. For volts D change to D. Solenoid Pilot ontrolled Model (NOMO Style) Pressure ontrolled Model X O 0.6 (6.7) Port X- (/8 external -pin M / Signal port / Signal port X O 0.6 (6.7) -pin M Port Port Port Port Solenoid Pilot ontrolled Models (Pacer Style) Model Numbers* Port Size v Dimensions inches (mm) Weight, - lb (kg) SV7N7608S** 0. (67) 8. (9).9 (99).0 (.) SV7N7708S** -/ 9 0. (67) 8. (9).9 (99).0 (.) SV7N7808S** -/ 0. (67) 8. (9).9 (99).0 (.) Pressure ontrolled Models SV7N760S 0. (67).7 (96). (88).0 (0.0) SV7N770S -/ 9 0. (67).7 (96). (88).0 (0.0) SV7N780S -/ 0. (67).7 (96). (88).0 (0.0) *NPT port threads. For SPP threads, replace N in the model number with a D, e.g. SV7D7608S. ** =0 volts 60 Hz solenoids. For volts D change to D. Solenoid Pilot ontrolled Model (Pacer Style) Pressure ontrolled Model Port Y- (pilot exhaust) X O 0. (.) -pin Mini Port X- (/8 external -pin M / Signal port Port X O 0. (.) / Signal port -pin M Port Port Port Port X- (/8 external -pin Mini

9 Wiring Kits These kits are available in lengths of or 0 meters, with a cord grip on each cable. The kits for SV7 PO heck, solenoid pilot controlled models come with cables; one with a -pin MINI for the solenoid and one with a -pin M (Micro) for the sensing switch. The kits for the pressure controlled models include only one cable with a -pin M for the sensing switch. (Note: Each cable has one.) For SV7 Redundant PO heck valves (T ), order kits. Kit Number Valve Type Length (meters) No. of ables 9H77 Solenoid Pilot 0H77 Solenoid Pilot 0 H77 Pressure ontrolled H77 Pressure ontrolled 0 PIN Solenoid able with -pin MINI onnector PIN (GROUND) PIN Sensing Switch able with -pin M onnector LK PIN PIN LK urrent/voltage Max.. /0 V PIN PIN PIN Optional Pressure Switch Kit (60886) Integrated Double-Pole Single-Throw Switch (DPST) Schematic Switch States Note: Pressure switch closes on falling pressure of psig. General Illustration Safety-Related pplications ROSS ontrols is the leader in safety-related pneumatic products. Shown here are a few examples of the variety of ROSS safety-related products and their applications. Please contact us if you are interested in or confused about safety for your pneumatically operated equipment. ROSS Safety-Related pplications * ylinder hazard in directions * ounterbalance * Pinch points * Monitored power systems * Tooling or product damage * Partial de-energization * Single point Lockout * Vertical loads * Press clutch/brake * ylinder hazard -Way ontrol Reliable Double Valve L-O-X at lternative Method LOTO at lternative Method LOTO Referenced Standards: ll standards are subject to revision. Parties are encouraged to investigate and apply the most recent editions of the standards indicated below. OSH 9 FR 90.7 S Z-0 S Z60-0 ISO 89- ISO 8:000 EN 07 NSI/SSE Z.- 00 NSI/PMMI ROSS ONTROLS U.S.. ustomer Svs GET-ROSS Technical Svs TEK-ROSS -Way SV7 Sensing Valve EEZ-ON Redundant PO heck PO heck DISLIMER These circuits are illustrative only and not intended to be used literally for your application. Each machine is unique and has individual characteristics that must be considered when designing a safety circuit. In addition, the referenced standards are not an exhaustive list. There may be many additional local, state, national, and international standards as well as machine function specific standards pertinent to your machine. This document is not a substitute for a complete risk assessment of a machine s hazards, professional circuit design or acquiring an in depth understanding of standards/regulations relevant to an application or machine. WRRNTY and UTIONS Standard ROSS warranty and cautions apply, available upon request or at ROSS EUROP GmbH Germany Fax: info@rosseuropa.com ROSS SI K.K. Japan Fax: custsvc@rossasia.co.jp ROSS UK Ltd. United Kingdom Fax: sales@rossuk.co.uk ROSS ONTROLS INDI Pvt. Ltd. India Fax: rossindia@airtelbroadband.in ROSS SOUTH MERI Ltda. razil Fax: vendas@ross-sulamerica.com.br DIMFLUID s.a.s. France Fax: dimafluid@dimafluid.com ROSS ONTROLS (HIN) Ltd. hina Fax: alvinzhurong@vip.6.com Printed in the U.S.. Rev. 0/0 00 ROSS ONTROLS. ll Rights Reserved. Form NPS0

10 New Product Introduction Preassembled Wiring Kits Series SV7 Sensing Valves Wiring Kits DESRIPTION: These kits are available in lengths of or 0 meters, with a cord grip for each cable. The kits for solenoid piloted SV7 models come with cables; one with a -pin MINI for the solenoid and one with a -pin M (Micro) for the sensing switch. The kits for the air piloted models include only one cable with a -pin M for the sensing switch. (Note: Each cable has one.) PIN Solenoid able with -pin MINI onnector PIN (GROUND) PIN LK PIN Sensing Switch able with -pin M onnector for / and / bodies. PIN LK urrent/voltage Max.. /0 V PIN PIN PIN Sensing Switch able with -pin M onnector for inch body. PIN Kit Number Valve Type Length (meters) No. of ables 9H77 Solenoid Pilot 0H77 Solenoid Pilot 0 H77 ir Pilot H77 ir Pilot 0 For Redundant SV7 (T ) Pilot Operated heck valve order kits. LK PIN PIN urrent/voltage Max.. /0 V PIN PIN DM Series E Wiring Kits DESRIPTION: These kits include cables with either a DIN or M plus a cord grip for each. They are available in lengths of or 0 meters. Separate kits are available for the Status Indicator. (Note: Each cable has one.) PIN Solenoid ables with DIN onnector NOT USED PIN GROUND Status Indicator able with DIN onnector LK GROUND LK Status Indicator kits include one cable with DIN and a cord grip. Kit Number Length (meters) 7H77 8H77 0 ROSS ONTROLS U.S.. ustomer Svs GET-ROSS Technical Svs TEK-ROSS Kit Number Solenoid onnector Type Length (meters) H77 DIN H77 DIN 0 H77 M 6H77 M 0 ROSS EUROP GmbH Germany Fax: info@rosseuropa.com ROSS SI K.K. Japan Fax: custsvc@rossasia.co.jp ROSS UK Ltd. United Kingdom Fax: sales@rossuk.co.uk ROSS ONTROLS INDI Pvt. Ltd. India Fax: rossindia@airtelbroadband.in ROSS SOUTH MERI Ltda. razil Fax: vendas@ross-sulamerica.com.br DIMFLUID s.a.s. France Fax: dimafluid@dimafluid.com ROSS ONTROLS (HIN) Ltd. hina Fax: alvinzhurong@vip.6.com

11 DM Series Wiring Kits Standard Wiring Kits DESRIPTION: Kits include three cables for the solenoids and one cable for the status indicator. ll cables come with a cord grip. Solenoid cables come with either DIN or M s. They are available in lengths of or 0 meters. (Note: Each cable has one.) PIN Solenoid ables with DIN onnector NOT USED PIN GROUND Status Indicator able with DIN onnector LK GROUND LK Kit Number Solenoid onnector Type Length (meters) 8H77 DIN 8H77 DIN 0 88H77 M 89H77 M 0 Wiring Kits with J-ox DESRIPTION: J-ox is a junction box with a 0-pin MINI for connecting to the user s control system and () -pin M ports for connecting to the solenoids and the status indicator on the DM Series valve. The J-ox kits include the J-ox as described above and () -meter cables for connecting to the valve. These cables have a on each end. The status indicator cable and the () solenoid cables have an M on one end and a DIN on the other end (M-DIN). Standard valves come with DIN type solenoid connections, but could be bought with M type connections as well. Therefore we also offer a kit that provides solenoid cables with an M on each end (M-M). Kit Number Solenoid onnector Type Length (meters) 9H77 M - DIN 0H77 M - M.8 (6.9).90 (7.6) (.9) dia. 0.8 [.].0 (). - 6UN.9 (00) ROSS ONTROLS

12 J-ox Wiring 0 Pin Pin # Port Port Port Port Pin # Pin # Pin # Pin # PIN MINI able DESRIPTION: These cables have a 0-pin MINI for connecting the J-ox kits above to the user s control system. Kits include one cable with and cord grip. able conductors are 8 gage wire. Kit Number Length (feet) H77 H77 0 H77 0 6H77 0 PIN # Wire olors: Orange lue White/black Red/black Green/black Orange/black Red Green/yellow lack White Outlet Port Pressure Monitoring Wiring Kit Some customers prefer to monitor downstream pressure in addition to using the DM or DM Series valve. convenient way to do this is to install a pressure switch in the extra outlet port that is provided on the valve. The Outlet Port Pressure Monitoring wiring kit can be used with one of the J-ox kits above to split one of the M ports on the J-ox so that a pressure switch can be wired in as well. These kits consist of one port splitter (a Tee with three M s) and one M-DIN cable ( meter). Kit Number H77 DESRIPTION: Pressure switch not included. pressure switch is available separately - order part number O 0.6 (0) 0. (7) 0.7 (0).6 (0).6 FEMLE PORT SPLITTER MLE FEMLE Mx Female Mx Male

13 Example of onnecting a DM Series valve with a J-OX Kit and an Outlet Port Monitoring Kit. 9H77 J-ox and cables (M to DIN) - meter length. H77 0-pin cable - 0 foot length. H77 Port splitter and cable (M to DIN) - meter length. (aka - Outlet Port Pressure Monitoring Wiring Kit) 8686 Pressure switch for outlet port pressure monitoring. Splitter plugged into port 0 ft 0-pin cable J-ox Port splitter and cable Pressure switch Pressure Switch (outlet port) Sol. Reset Sol. Status Indicator Since 9 ROSS ONTROLS has been manufacturing the highest quality pneumatic valves. Founded by three families and still privately held, Ross has grown from a small Michigan valve company into a company with global subsidiaries and distribution throughout the world. It is this global presence that allows Ross to focus on specific industries and provide the global support required in our integrated world. Ross continues to lead in industries such as safety by providing products to meet the specific requirements of those industries as well as the global standards. For over 60 years Ross has produced redundant monitored valves for safety applications. The DM Series and Series E are our latest control-reliable valve series that are third party certified for category and applications. Our SV series is third party certified for category and applications. 008 marked the 6th anniversary for our pneumatic energy isolation L-O-X valve series. ll of our safety products meet or exceed the global safety requirements for machine safeguarding and energy isolation. Our global safety team can assist with system and product selection and provide solutions that help customers standardize globally. WRRNTY and UTIONS Standard ROSS warranty and cautions apply, available upon request or at Printed in the U.S.. Rev. /0 00 ROSS ONTROLS. ll Rights Reserved. NPS0