Optocoupler, Phototransistor Output, AC Input, with Base Connection

Transcription

1 Optocoupler, Phototransistor Output, AC Input, with Base Connection HAA Vishay Semiconductors DESCRIPTION i The HAA is a bi-directional input optically coupled isolator consisting of two inverse parallel gallium arsenide infrared LEDs coupled to a silicon NPN phototransistor in a 6 pin DIP package. The HAA has a minimum CTR of 20 %, a CTR symmetry of :3 and is designed for applications requiring detection or monitoring of AC signals. A/C C/A NC 2 3 V D E B C E FEATURES AC or polarity insensitive input Built-in reverse polarity input protection I/O compatible with integrated circuits Industry standard DIP package Isolation test voltage: 5300 V RMS Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS Telephone line detection AC line motor PLC Instrumentation AGENCY APPROVALS UL577, file no. E52744 system code H, double protection CSA 9375 BSI IEC 60950; IEC DIN EN (VDE0884)/DIN EN (pending), available with option FIMKO ORDERING INFORMATION DIP-# Option 6 H A A - X 0 0 # T PART NUMBER PACKAGE OPTION TAPE AND REEL 7.62 mm Option mm Option 9 AGENCY CERTIFIED/PACKAGE CTR (%) UL, cul, BSI, FIMKO 20 DIP-6 HAA DIP-6, 400 mil, option 6 HAA-X006 SMD-6, option 7 HAA-X007T () SMD-6, option 9 HAA-X009T () VDE, UL, cul, BSI, FIMKO 20 DIP-6 HAA-X00 Note Additional options may be possible, please contact sales office. () Also available in tubes; do not add T to end. > 0.7 mm > 0. mm Document Number: For technical questions, contact: optocoupleranswers@vishay.com Rev..7, 23-Feb-

2 HAA Vishay Semiconductors Optocoupler, Phototransistor Output, ABSOLUTE MAXIMUM RATINGS (T amb =, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Forward continuous current ± 60 ma Power dissipation P diss 00 mw Derate linearly from.3 mw/ C OUTPUT Power dissipation P diss 200 mw Derate linearly from 2.6 mw/ C Collector emitter breakdown voltage BO 30 V Emitter base breakdown voltage BV EBO 5 V Collector base breakdown voltage BV CBO 70 V COUPLER Between emitter and detector, Isolation test voltage (RMS) referred to standard climate V ISO 5300 V RMS 23 C/50% RH, DIN 5004 Creepage distance 7 mm Clearance distance 7 mm Comparative tracking index per DIN IEC 2/VDE 0303, part CTI 75 Isolation resistance V IO = 500 V, T amb = R IO 0 2 V IO = 500 V, T amb = 00 C R IO 0 Storage temperature range T stg - 55 to + Operating temperature range T amb - 55 to + 00 C Lead soldering time at 260 C T sld 0 s Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTCS (T amb =, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage = ± 0 ma V F.2.5 V OUTPUT Collector emitter breakdown voltage I C = ma BO 30 V Emitter base breakdown voltage I E = 00 μa BV EBO 5 V Collector base breakdown voltage I C = 00 μa BV CBO 70 V Collector emitter leakage current = 0 V I CEO 5 00 na COUPLER Collector emitter saturation voltage = ± 0 ma, I C = ma sat 0.4 V Note Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (T amb =, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT DC current transfer ratio = ± 0 ma, = 0 V CTR DC 20 % Symmetry (CTR at + 0 ma)/(ctr at - 0 ma) For technical questions, contact: optocoupleranswers@vishay.com Document Number: Rev..7, 23-Feb-

3 Optocoupler, Phototransistor Output, HAA Vishay Semiconductors TYPICAL CHARACTERISTICS (T amb =, unless otherwise specified) IF - LED Forward Current (ma) ihaa_0 85 C - 55 C V F - LED Forward Voltage (V) Fig. - LED Forward Current vs.forward Voltage - Normalized.5.0 = 0 V, = CTRce(sat) ihaa_04 Fig. 4 - Normalized Non-Saturated and Saturated CTR vs. - Normalized CTR.5.0 ihaa_02 = 0 V, = CTRce(sat) Fig. 2 - Normalized Non-Saturated and Saturated CTR vs. - Normalized CTR ihaa_05 = 0 V, = 85 C CTRce(sat) Fig. 5 - Normalized Non-Saturated and Saturated CTR vs. - Normalized CTR ihaa_03 = 0 V, = CTRce(sat) I CE - Collector Current (ma) ihaa_06 00 C Fig. 3 - Normalized Non-Saturated and Saturated CTR vs. Fig. 6 - Collector Emitter Current vs. Temperature and Document Number: For technical questions, contact: optocoupleranswers@vishay.com Rev..7, 23-Feb- 3

4 HAA Vishay Semiconductors Optocoupler, Phototransistor Output, I CEO - Collector Emitter (na) ihaa_07 = 0 V TYPICAL T amb - Ambient Temperature ( C) Normalized Photocurrent ihaa_0 NIB - Ta = - 20 C NIb, Ta = NIb, Ta = NIb, Ta = 0 00 Fig. 7 - Collector Emitter Leakage Current vs. Temperature Fig. 0 - Normalized Photocurrent vs. cb - Normalized CTR cb.5.0 V CB = 9.3 V ihaa_08 Fig. 8 - Normalized CTR cb vs. and Temperature Nh FE(sat) - Normalized Saturated h FE ihaa_ I b - Base Current (µa) I b = 20 µa = 0 V Fig. - Normalized Saturated h FE vs. Base Current and Temperature Icb - Collector Base Photocurrent (µa) I CB =.0357 x ^.363 Nh FE(sat) Normalized Saturated h FE C = 0 V I B = 20 µa 0. ihaa_ ihaa_2 I b - Base Current (µa) Fig. 9 - Collector Base Photocurrent vs. Fig. 2 - Normalized Saturated h FE vs. Base Current and Temperature For technical questions, contact: optocoupleranswers@vishay.com Document Number: Rev..7, 23-Feb-

5 Optocoupler, Phototransistor Output, HAA Vishay Semiconductors t p - Propagation Delay (µs) ihaa_3 V CC = 5 V, V TH =.5 V t PHL t PLH.0 00 Fig. 3 - Propagation Delay vs. Collector Load Resistor 0 R L - Collector Load Resistor (kω) t phl - Propagation Delay (µs) t D V O t R t PLH V TH =.5 V t PHL t S t F ihaa_4 Fig. 4 - Switching Waveform V CC = 5 V F = 0 khz, DF = 50 % R L V O ihaa_5 Fig. 5 - Switching Schematic Document Number: For technical questions, contact: optocoupleranswers@vishay.com Rev..7, 23-Feb- 5

6 HAA Vishay Semiconductors Optocoupler, Phototransistor Output, PACKAGE DIMENSIONS in millimeters 3 2 Pin one ID 6.4 ± ISO method A 8.6 ± 0. min..2 ± ± typ ± i78004 ± ± 5 3 to typ to typ. Option 6 Option 7 Option max ± ± min. 0.7 min. 4.3 ± min. 0. ± ± max. 0.6 min. 0.6 typ R R PACKAGE MARKING HAA V YWW H Notes Only options and 7 are reflected in the package marking. The VDE Logo is only marked on option parts. Tape and reel suffix (T) is not part of the package marking. For technical questions, contact: optocoupleranswers@vishay.com Document Number: Rev..7, 23-Feb-

7 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9000