Titre: Required Information For Submitting Databases to TELEDYNE DALSA Design & Product Support.
|
|
|
- Rachel Jordan
- 8 years ago
- Views:
Transcription
1 Titre: Required Information For Submitting Databases to TELEDYNE DALSA Design & Product Support. Document : DES Création du document : December 22th, 2004 Bromont, Québec, Canada
2 2 DE 7 Database Submission Form Please refer to DES-0001 Terms and Conditions For Submitting Databases to TELEDYNE DALSA Design and Product Foundry Support for more information. Company Name: Contact Name: Contact Phone : Contact Address: Alternate Contact Name: Alternate Contact Phone : Alternate Contact Address: DALSA Process Family Used: CMOS Select the right process family. Technology To Be Used : 0.5um Select the right technology Chip 1 Customer Device Code : File Name : Top Structrure Name : Customer Device Code : File Name : Top Structrure Name : Customer Device Code : File Name : Top Structrure Name : Chip 2 Chip 3 Special Data Generation Required? If Yes, Please explain: No Select the right option. Magnification or Shrink Required? If Yes, Please explain: No Select the right option. Layout orientation change required? If Yes, Please explain: No Select the right option. Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: / Special Instructions
3 3 DE 7 - Please provide the number (s), for each mask level or design aid layers in the tables below. - Please indicate if the mask(s) need to be made or revised, indicated the Yes or No in column. - All numbers within the submitted database should be accounted for. Use the table provided in Varia Layer Table to list any mask levels not present in the tables below or to list any design aid layers which should be used by TELEDYNE DALSA to generate mask data. - If a TELEDYNE DALSA Design Kit as be used, consult the chapter in the User Guide document for specific tehnology. CMOS / HV CMOS Layer Table 10 P-Well 11 N-Well 12 HV_Def 16 HV_Well 18 N-Base 20 Active Area 21 P-Field 22 N-Field 24 Vtn Adjust 25 Vtp Adjust 26 Vtp Adjust 2 28 P-Base 29 Poly Cap Hi Res 30 Poly Gate 33 P-Buried 35 Poly Gate Hi Res 40 N+ Diffusion 41 N- Extended 44 N-DDD or LDD Implant 50 P+ Diffusion 51 P-Extended 52 P-Top 53 Poly Cap 58 Poly 3 59 P-DDD / LDD Implant 60 Contacts 70 Metal 1 76 Vias 1 77 Metal 2 80 Pads 86 Vias 2 87 Metal 3 96 Vias3 97 Metal 4 -- DRL -- HV Marker
4 4 DE 7 CCD Layer Table 02 Zero 10 Well 11 Well 2 / Barrier 0 12 Well 3 / HV_Definition 20 Active Area 23 Poly 0 27 Buried Channel 1 Implant 28 Buried Channel 2 Implant 29 Channel Stop Implant 30 Poly1 31 AB Implant / Nitride Definition 32 Poly 1 Repair 35 Poly 1 HiRes 40 Source / Drain Implant 41 PPD Implant 43 PPD Implant 2 50 Top Side Contact Implant 51 PPD Implant 3 52 Barrier 1 53 Poly 2 54 Nitride Definition 3 55 Poly 2 Repair 56 Barrier 2 57 Buried Contact / Nitride Definition 2 58 Poly 3 59 Nitride on Poly 60 Contacts 61 Contacts 2 65 Poly 3 Repair 70 Metal 1 75 Metal Resistor 76 Vias 1 77 Metal 2 or Lightshield 80 Pads 83 Green Filter 84 Blue Filter 85 Red Filter 86 Vias 2 87 Metal 3 90 Flood 95 Microlens 96 Vias 3 97 Anti Reflective 99 Pads for Microlens
5 5 DE 7 MEMS Layer Table 01 Marker 02 Zero 04 Clear Out 05 Locos 1 06 Locos 2 10 P-Well 11 N-Well / Buried Layer 12 HV_Defenition 13 Crystal Revealtant 15 Isolation 16 HV_Well 17 Trench 18 Nitride Etch 0 19 Nitride Etch 1 20 Active Area 21 P-Field 24 Vtn Adjust 25 Vtp Adjust 26 Vt Adjust 2 27 Trench 2 / Capacitor Implant 28 P-Base 29 Poly Cap Hi Res / Isolation 30 Poly Gate / Poly 1 31 Anchor 0 32 Poly 0 33 P-Buried 34 Dimple 35 Poly Gate Hi Res 36 Anchor 1 37 Poly 1 38 Mechanical Frame 39 Poly Via 40 N+ Diffusion 41 N- Extended 42 Anchor 2 43 Poly 2 47 Anchor 3 48 Poly 3 50 P+ Diffusion 52 P-Top / P- Resistor 53 Poly Cap / Poly 2 54 Bond Adjust 55 Diaphragm 56 Capacitor 57 SiCr Reistor 58 Poly Resistor / Barrier 60 Contacts 61 Contatcs 2 64 Waveguide / Grating 70 Metal 1 74 Etch Stop 75 Getter
6 6 DE 7 76 Vias 1 77 Metal 2 80 Pads 82 Pads 2 84 Polarisation Compensation 85 Seal Ring 86 Vias 2 87 Metal 3 88 Open 90 Gold Bond Pad 94 Cap Cavity / Aluminium Reflective Coating 95 Cavity 96 Vias 3 97 Metal 4 99 HF_Shield
7 7 DE 7 Varia Layer Table
Lecture 030 DSM CMOS Technology (3/24/10) Page 030-1
Lecture 030 DSM CMOS Technology (3/24/10) Page 030-1 LECTURE 030 - DEEP SUBMICRON (DSM) CMOS TECHNOLOGY LECTURE ORGANIZATION Outline Characteristics of a deep submicron CMOS technology Typical deep submicron
Winbond W2E512/W27E257 EEPROM
Construction Analysis Winbond W2E512/W27E257 EEPROM Report Number: SCA 9703-533 Global Semiconductor Industry the Serving Since 1964 15022 N. 75th Street Scottsdale, AZ 85260-2476 Phone: 602-998-9780 Fax:
REV 0 WAFER FABRICATION FLOWCHART CMOS PROCESS
WAFER FABRICATION FLOWCHART INCOMING Vendor: Product: Package: Location of Wafer Fab: Assembly: Final Test: Q.C. Test: Source Accept Test: Quality Contact: Linear Technology Corporation CMOS Products All
Winbond W971GG6JB-25 1 Gbit DDR2 SDRAM 65 nm CMOS DRAM Process
Winbond W971GG6JB-25 1 Gbit DDR2 SDRAM 65 nm CMOS DRAM Process Process Review For comments, questions, or more information about this report, or for any additional technical needs concerning semiconductor
Advanced VLSI Design CMOS Processing Technology
Isolation of transistors, i.e., their source and drains, from other transistors is needed to reduce electrical interactions between them. For technologies
Evaluating Embedded Non-Volatile Memory for 65nm and Beyond
Evaluating Embedded Non-Volatile Memory for 65nm and Beyond Wlodek Kurjanowicz DesignCon 2008 Sidense Corp 2008 Agenda Introduction: Why Embedded NVM? Embedded Memory Landscape Antifuse Memory evolution
1. Submission Rules. 2. Verification tools. 3. Frequent errors
Design Submission 1. Submission Rules 2. Verification tools 3. Frequent errors Design submission rules 1. Send the submission form in the same time as the circuit database 2. The GDSII file must have a.gds
MEMS Processes from CMP
MEMS Processes from CMP MUMPS from MEMSCAP Bulk Micromachining 1 / 19 MEMSCAP MUMPS processes PolyMUMPS SOIMUMPS MetalMUMPS 2 / 19 MEMSCAP Standard Processes PolyMUMPs 8 lithography levels, 7 physical
Introduction to VLSI Fabrication Technologies. Emanuele Baravelli
Introduction to VLSI Fabrication Technologies Emanuele Baravelli 27/09/2005 Organization Materials Used in VLSI Fabrication VLSI Fabrication Technologies Overview of Fabrication Methods Device simulation
Introduction to Semiconductor Manufacturing Technology. Chapter 1, Introduction. Hong Xiao, Ph. D. hxiao89@hotmail.com
Introduction to Semiconductor Manufacturing Technology Chapter 1, Introduction Hong Xiao, Ph. D. hxiao89@hotmail.com Hong Xiao, Ph. D. www2.austin.cc.tx.us/hongxiao/book.htm 1 Objective After taking this
AMD AXDA3000DKV4D Athlon TM XP Microprocessor Structural Analysis
September 22, 2004 AMD AXDA3000DKV4D Athlon TM XP Microprocessor Structural Analysis Table of Contents Introduction... Page 1 List of Figures... Page 2 Device Identification Major Microstructural Analysis
AN900 APPLICATION NOTE
AN900 APPLICATION NOTE INTRODUCTION TO SEMICONDUCTOR TECHNOLOGY INTRODUCTION by Microcontroller Division Applications An integrated circuit is a small but sophisticated device implementing several electronic
Micron MT29F2G08AAB 2 Gbit NAND Flash Memory Structural Analysis
August 17, 2006 Micron MT29F2G08AAB 2 Gbit NAND Flash Memory Structural Analysis For comments, questions, or more information about this report, or for any additional technical needs concerning semiconductor
The MOSFET Transistor
The MOSFET Transistor The basic active component on all silicon chips is the MOSFET Metal Oxide Semiconductor Field Effect Transistor Schematic symbol G Gate S Source D Drain The voltage on the gate controls
STMicroelectronics. Deep Sub-Micron Processes 130nm, 65 nm, 40nm, 28nm CMOS, 28nm FDSOI. SOI Processes 130nm, 65nm. SiGe 130nm
STMicroelectronics Deep Sub-Micron Processes 130nm, 65 nm, 40nm, 28nm CMOS, 28nm FDSOI SOI Processes 130nm, 65nm SiGe 130nm CMP Process Portfolio from ST Moore s Law 130nm CMOS : HCMOS9GP More than Moore
Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.
CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity
INF4420. Outline. Layout and CMOS processing technology. CMOS Fabrication overview. Design rules. Layout of passive and active componets.
INF4420 Layout and CMOS processing technology Spring 2012 1 / 76 Outline CMOS Fabrication overview Design rules Layout of passive and active componets Packaging 2 / 76 Introduction As circuit designers
Fabrication and Manufacturing (Basics) Batch processes
Fabrication and Manufacturing (Basics) Batch processes Fabrication time independent of design complexity Standard process Customization by masks Each mask defines geometry on one layer Lower-level masks
Teledyne DALSA. Our People, Technology, and Products
Teledyne DALSA Our People, Technology, and Products Our Parent Company, Teledyne Technologies Teledyne is a US-based leading provider of sophisticated electronic subsystems, instrumentation and communication
Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M
Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection
Intel Q3GM ES 32 nm CPU (from Core i5 660)
Intel Q3GM ES Structural Analysis For comments, questions, or more information about this report, or for any additional technical needs concerning semiconductor and electronics technology, please call
Comparison study of FinFETs: SOI vs. Bulk Performance, Manufacturing Variability and Cost
Comparison study of FETs: SOI vs. Bulk Performance, Manufacturing Variability and Cost David Fried, IBM Thomas Hoffmann, IMEC Bich-Yen Nguyen, SOITEC Sri Samavedam, Freescale Horacio Mendez, SOI Industry
Lab 3 Layout Using Virtuoso Layout XL (VXL)
Lab 3 Layout Using Virtuoso Layout XL (VXL) This Lab will go over: 1. Creating layout with Virtuoso layout XL (VXL). 2. Transistor Chaining. 3. Creating Standard cell. 4. Manual Routing 5. Providing Substrate
CO2005: Electronics I (FET) Electronics I, Neamen 3th Ed. 1
CO2005: Electronics I The Field-Effect Transistor (FET) Electronics I, Neamen 3th Ed. 1 MOSFET The metal-oxide-semiconductor field-effect transistor (MOSFET) becomes a practical reality in the 1970s. The
ONYX. Preflight Training. Navigation Workflow Issues Preflight Tabs
ONYX Preflight Training Navigation Workflow Issues Preflight Tabs Preflight Module Tool Bar Tabs Tab Options Preview Area Information Open in Preflight Recommended Workflow Highlight Printer File > Open
www.photonics.com May 2013 Color Sense Trilinear Cameras Bring Speed, Quality
www.photonics.com May 2013 Color Sense Trilinear Cameras Bring Speed, Quality Tech Feature Trilinear Cameras Offer High-Speed Color Imaging Solutions With high color quality and speed and low cost trilinear
IBS - Ion Beam Services
IBS - Ion Beam Services Profile Technologies Devices & sensor fabricat ion Participation to R&D programs Researched partnership Présentation activité composant 1 Profile : Products and services Product
ELEC 3908, Physical Electronics, Lecture 15. BJT Structure and Fabrication
ELEC 3908, Physical Electronics, Lecture 15 Lecture Outline Now move on to bipolar junction transistor (BJT) Strategy for next few lectures similar to diode: structure and processing, basic operation,
Graduate Student Presentations
Graduate Student Presentations Dang, Huong Chip packaging March 27 Call, Nathan Thin film transistors/ liquid crystal displays April 4 Feldman, Ari Optical computing April 11 Guerassio, Ian Self-assembly
Rogers 3003, 3006, 3010, 3035, 3203, 3206, 3210
Stocked Materials: RIGID STANDARD FR4 High Tg 170c Black FR4 Polyclad 370HR (Lead Free) HIGH RELIABILITY Polyimide (Arlon 85N, Isola P96) BT (G200) HIGH FREQUENCY: Park Nelco 4000-13, 4000-13si Getek Gore
Nanoscale Resolution Options for Optical Localization Techniques. C. Boit TU Berlin Chair of Semiconductor Devices
berlin Nanoscale Resolution Options for Optical Localization Techniques C. Boit TU Berlin Chair of Semiconductor Devices EUFANET Workshop on Optical Localization Techniques Toulouse, Jan 26, 2009 Jan 26,
INTERNATIONAL ATOMIC ENERGY AGENCY INSTRUMENTATION UNIT SMD (SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999
(SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999 (SURFACE MOUNTED DEVICES) REPAIR 1 TABLE OF CONTENTS PAGE 1. INTRODUCTION 3 2. ADVANTAGES 4 3. LIMITATIONS 4 4. DIALECT 5 5. SIZES AND DIMENSIONS
Heating, Ventilation, Air Conditioning and Refrigeration (HVACR)
Heating, Ventilation, Air Conditioning and Refrigeration (HVACR) I. Demonstrate safety skills in typical HVACR work situations to NATE Core Installer Knowledge Areas for Technician Excellence for Safety
WASHROOM UPGRADE SIR CHARLES TUPPER BUILDING 2250 RIVERSIDE DRIVE, OTTAWA, ON SIR CHARLES TUPPER BUILDING A0.0 COVER SHEET / DRAWING LIST
0 RIVERSIDE DRIVE, OTTAWA, ON A0.0 COVER SHEET / DRAWING LIST A0. LEGEND AND GENERAL NOTES A0. GENERAL NOTES A0. GENERAL NOTES A0. TYPICAL WASHROOM WALL/SINK SECTION A0. DETAIL - CONTROL JOINT A0. DETAIL
Interactive Interface USERS /CMP
Web site: http://cmp.imag.fr General informations Specific informations and forms Interface Users / CMP General informations Web site: Home page Quick References News Upcoming RUNS Customers login General
ECE 410: VLSI Design Course Introduction
ECE 410: VLSI Design Course Introduction Professor Andrew Mason Michigan State University Spring 2008 ECE 410, Prof. A. Mason Lecture Notes Page i.1 Age of electronics microcontrollers, DSPs, and other
Tutorials Drawing a 555 timer circuit
Step 1 of 10: Introduction This tutorial shows you how to make an electronic circuit using Livewire and PCB Wizard 3. You should follow this tutorial to learn the basic skills you will need to use Livewire
GaN IC Die Handling, Assembly and Testing Techniques
GaN IC Die Handling, Assembly and Testing Techniques Page 1 of 9 1. Scope This document describes the storage and handling requirements for GaN IC chips. It also describes recommended assembly and testing
CADENCE LAYOUT TUTORIAL
CADENCE LAYOUT TUTORIAL Creating Layout of an inverter from a Schematic: Open the existing Schematic Page 1 From the schematic editor window Tools >Design Synthesis >Layout XL A window for startup Options
MOSIS Scalable CMOS (SCMOS)
Vendor-independent, scalable rules (MOSIS SCMOS s) Design s MOSIS Scalable CMOS (SCMOS) (Revision 8.00) Updated: May 11, 2009 1. Introduction This document defines the official MOSIS scalable CMOS (SCMOS)
Module 7 : I/O PADs Lecture 33 : I/O PADs
Module 7 : I/O PADs Lecture 33 : I/O PADs Objectives In this lecture you will learn the following Introduction Electrostatic Discharge Output Buffer Tri-state Output Circuit Latch-Up Prevention of Latch-Up
INTRODUCTION TO ION IMPLANTATION Dr. Lynn Fuller, Dr. Renan Turkman Dr Robert Pearson
Ion Implantation ROCHESTER INSTITUTE OF TECHNOLOGY MICROELECTRONIC ENGINEERING INTRODUCTION TO ION IMPLANTATION Dr. Lynn Fuller, Dr. Renan Turkman Dr Robert Pearson Webpage: http://people.rit.edu/lffeee
StarRC Custom: Next-Generation Modeling and Extraction Solution for Custom IC Designs
White Paper StarRC Custom: Next-Generation Modeling and Extraction Solution for Custom IC Designs May 2010 Krishnakumar Sundaresan Principal Engineer and CAE Manager, Synopsys Inc Executive Summary IC
InvenSense MPU-6515 6-Axis Accelerometer Gyroscope MEMS Motion Sensor
InvenSense MPU-6515 6-Axis Accelerometer Gyroscope MEMS Motion Sensor 1891 Robertson Road, Suite 500, Ottawa, ON K2H 5B7 Canada Tel: 613-829-0414 www.chipworks.com Some of the information in this report
Introduction to CMOS VLSI Design
Introduction to CMOS VLSI esign Slides adapted from: N. Weste,. Harris, CMOS VLSI esign, Addison-Wesley, 3/e, 24 Introduction Integrated Circuits: many transistors on one chip Very Large Scale Integration
P C B Wiz a r d 3 T u t o r i a l 3 Drawing a test probe circuit
Step 1 of 10: Introduction This tutorial shows you how to design and make a test probe with PCB Wizard. You should follow this tutorial to learn the basic skills you will need to use PCB Wizard effectively.
Lezioni di Tecnologie e Materiali per l Elettronica
Lezioni di Tecnologie e Materiali per l Elettronica Danilo Manstretta danilo.manstretta@unipv.it microlab.unipv.it Outline Passive components Resistors Capacitors Inductors Printed circuits technologies
Tanner EDA L-edit (Layout Editor)
Tanner EDA L-edit (Layout Editor) Tanner Tools Speeding Concept to Silicon EDA= Electronic Design and Automation NOTE: This tutorial was constructed in L-edit version 1.15 (c. October 2007) http://www.tanner.com/eda/
1.Introduction. Introduction. Most of slides come from Semiconductor Manufacturing Technology by Michael Quirk and Julian Serda.
.Introduction If the automobile had followed the same development cycle as the computer, a Rolls- Royce would today cost $00, get one million miles to the gallon and explode once a year Most of slides
Silicon-On-Glass MEMS. Design. Handbook
Silicon-On-Glass MEMS Design Handbook A Process Module for a Multi-User Service Program A Michigan Nanofabrication Facility process at the University of Michigan March 2007 TABLE OF CONTENTS Chapter 1...
Advanced High Technology Microwave PCB and Assemblies
Advanced High Technology Microwave PCB and Assemblies 2 Teledyne Labtech is one of the world s leading manufacturers of complex and high technology RF/microwave printed circuit boards, assemblies and test,
Model CS 64 Mini-DIN Cable and Adaptor
Model CS 64 Mini-DIN Cable and Adaptor Page 1 of 9 Features Hi-Pro and NOAHlink compatible cable & Mini-DIN CS 64 Clip Module / NOAHlink Adaptor #1 Integrated Clip Module - Mini-DIN Cable Integrated NOAHlink
How to measure absolute pressure using piezoresistive sensing elements
In sensor technology several different methods are used to measure pressure. It is usually differentiated between the measurement of relative, differential, and absolute pressure. The following article
Finding and Fixing Leaks
Finding and Fixing Leaks Where did all that water go? Could we have splashed all that water out of the tub? These are all common thoughts that can run through your mind when you open up the hot tub cover
Interactive Interface USERS /CMP
Web site: http://cmp.imag.fr General informations Specific informations and forms Interface Users / CMP General informations Web site: Home page Quick References News Upcoming RUNS Customers login General
S-PARAMETER MEASUREMENTS OF MEMS SWITCHES
Radant MEMS employs adaptations of the JMicroTechnology test fixture depicted in Figure 1 to measure MEMS switch s-parameters. RF probeable JMicroTechnology microstrip-to-coplanar waveguide adapter substrates
MEMS Overview. What is MEMS?
MEMS Overview SPEAKER Andrew Mason, Asst. Professor in Electrical and Computer Engineering TOPIC Overview of Micro-Electro-Mechanical Systems (MEMS) OUTLINE Overview of MEMS & Microsystems Navid Yazdi
Touch Through Metal. mtouch Metal Over Capacitive Technology Part 1
Touch Through Metal mtouch Metal Over Capacitive Technology Part 1 2010 Microchip Technology Incorporated. All Rights Reserved. Touch Through Metal Slide 1 Hello and welcome to Microchip s Touch Through
Sputtered AlN Thin Films on Si and Electrodes for MEMS Resonators: Relationship Between Surface Quality Microstructure and Film Properties
Sputtered AlN Thin Films on and Electrodes for MEMS Resonators: Relationship Between Surface Quality Microstructure and Film Properties S. Mishin, D. R. Marx and B. Sylvia, Advanced Modular Sputtering,
the runnerless types of molds are explained post molding operations are described the basic methods of applied decoration methods are examined
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the various plastic finishing processes used in industry and their
Digital Integrated Circuit (IC) Layout and Design - Week 3, Lecture 5
igital Integrated Circuit (IC) Layout and esign - Week 3, Lecture 5! http://www.ee.ucr.edu/~rlake/ee134.html EE134 1 Reading and Prelab " Week 1 - Read Chapter 1 of text. " Week - Read Chapter of text.
Preface xiii Introduction xv 1 Planning for surface mount design General electronic products 3 Dedicated service electronic products 3 High-reliability electronic products 4 Defining the environmental
Biaxial tripod MEMS mirror and omnidirectional lens for a low cost wide angle laser range sensor
Biaxial tripod MEMS mirror and omnidirectional lens for a low cost wide angle laser range sensor U. Hofmann, Fraunhofer ISIT Itzehoe M. Aikio, VTT Finland Abstract Low cost laser scanners for environment
Photonic components for signal routing in optical networks on chip
15 th International Conference on Transparent Optical Networks Cartagena, Spain, June 23-27, 213 Photonic components for signal routing in optical networks on chip Vincenzo Petruzzelli, Giovanna Calò Dipartimento
Apple/AuthenTec TMDR92 iphone 5s, 6, and 6 Plus Fingerprint Sensor
Apple/AuthenTec TMDR92 iphone 5s, 6, and 6 Plus Fingerprint Sensor 1891 Robertson Road, Suite 500, Ottawa, ON K2H 5B7 Canada Tel: 613.829.0414 www.chipworks.com Some of the information in this report may
Grounding Demystified
Grounding Demystified 3-1 Importance Of Grounding Techniques 45 40 35 30 25 20 15 10 5 0 Grounding 42% Case 22% Cable 18% Percent Used Filter 12% PCB 6% Grounding 42% Case Shield 22% Cable Shielding 18%
DESIGN, FABRICATION AND ELETRICAL CHARACTERIZATION OF SOI FINFET TRANSISTORS
DESIGN, FABRICATION AND ELETRICAL CHARACTERIZATION OF SOI FINFET TRANSISTORS Prof. Dr. João Antonio Martino Professor Titular Departamento de Engenharia de Sistemas Eletrônicos Escola Politécnica da Universidade
Application Note 58 Crystal Considerations for Dallas Real-Time Clocks
www.maxim-ic.com Application Note 58 Crystal Considerations for Dallas Real-Time Clocks OVERVIEW This application note describes crystal selection and layout techniques for connecting a 32,768Hz crystal
SDX Submersible Depth Transmitter User Manual
SDX Submersible Depth Transmitter User Manual January 2011 USER INFORMATION Stevens makes no warranty as to the information furnished in these instructions and the reader assumes all risk in the use thereof.
Major LED manufacturing trends and challenges to support the general lighting application
Major LED manufacturing trends and challenges to support the general lighting application Semicon Russia 2011, June 1st! Ralph Zoberbier Director Product Management Aligner Content" 1. SUSS MicroTec Introduction
Modifying the Yaesu FT-847 External 22.625 MHz Reference Input
Modifying the Yaesu FT-847 External 22.625 MHz Reference Input David Smith VK3HZ Introduction This document describes the modification of an FT-847 to allow an external 22.625 MHz Reference oscillator
APPLICATION NOTES: Dimming InGaN LED
APPLICATION NOTES: Dimming InGaN LED Introduction: Indium gallium nitride (InGaN, In x Ga 1-x N) is a semiconductor material made of a mixture of gallium nitride (GaN) and indium nitride (InN). Indium
RESOLUX / HIGHLITE/ COMPACT LINE Technology Lighting as its best. Designed and produced in Germany
RESOLUX / HIGHLITE/ COMPACT LINE Technology Lighting as its best. Designed and produced in Germany RESOLUX 505 RESOLUX 650 RESOLUX 720 / 730 / 750 Application Suitable for high switching frequencies as
INDIAN LAKE ELEMENTARY KINDERGARTEN SUPPLY LIST 2015-2016
KINDERGARTEN SUPPLY LIST 3 Crayola Crayons, box of 24 Pencil top erasers Block eraser 2 Folders - Poly w/pockets & brads Folder - Poly pockets only (solid color) Elmer s glue 4 oz. bottle Scissors - Fiskar
Yoke harness color code: Horizontal: Red & Blue. Vertical: Yellow & Brown, or Yellow & Green, or Violet and Brown.
CRT Safety and Engineering Notice YOKE PLUG ORIENTATION Note: Your CRT has been provided with a Factory mounted yoke. It has been designed to work with a variety of different chassis configurations, thus
Lab 3 Rectifier Circuits
ECET 242 Electronic Circuits Lab 3 Rectifier Circuits Page 1 of 5 Name: Objective: Students successfully completing this lab exercise will accomplish the following objectives: 1. Learn how to construct
Guide for Modified Assembly: Lightning McQueen. By: Collin Patterson, University of Delaware. Materials and Tools:
Guide for Modified Assembly: Lightning McQueen By: Collin Patterson, University of Delaware Materials and Tools: PVC o 40 inches of 1 in diameter PVC o 25 inches of ¾ in PVC o 4 x 1 in elbows o 2 x ¾ in
Substrate maturity and readiness in large volume to support mass adoption of ULP FDSOI platforms. SOI Consortium Conference Tokyo 2016
Substrate maturity and readiness in large volume to support mass adoption of ULP FDSOI platforms Christophe Maleville Substrate readiness 3 lenses view SOI Consortium C1 - Restricted Conference Tokyo 2016
Microsystem technology and printed circuit board technology. competition and chance for Europe
Microsystem technology and printed circuit board technology competition and chance for Europe Prof. Udo Bechtloff, KSG Leiterplatten GmbH 1 Content KSG a continuously growing company PCB based Microsystems
LED DOWNLIGHT ONE 50XX SERIES
ONE 50XX LED reflectors are high power LED downlights ideal for mounting in lighting fixture frames. These downligths are available in few versions using CREE MK-R LED chip. All reflectors are supplied
Approaches for Implementation of Virtual Metrology and Predictive Maintenance into Existing Fab Systems
Workshop - Statistical methods applied in microelectronics 13. June 2011, Catholic University of Milan, Milan, Italy Approaches for Implementation of Virtual Metrology and Predictive Maintenance into Existing
Finegan Inspection Services, Inc.
Finegan Inspection Services, Inc. Report Prepared For: Phone 513-683-0733 Fa 513-697-0163 Owners Property Address City, State, ZIP Phone FAX Owners Realtor Realty Company Phone FAX OWNER INFORMATION PROPERTY
CONTENTS. Preface. 1.1.2. Energy bands of a crystal (intuitive approach)
CONTENTS Preface. Energy Band Theory.. Electron in a crystal... Two examples of electron behavior... Free electron...2. The particle-in-a-box approach..2. Energy bands of a crystal (intuitive approach)..3.
Improving the flood resistance of your home. Advice sheet 6: Flood-resilient floors
Improving the flood resistance of your home Advice sheet 6: Flood-resilient This sheet provides guidance on identifying different types of floor, assessing the routes floodwater may enter, and describes
Volumes. Goal: Drive optical to high volumes and low costs
First Electrically Pumped Hybrid Silicon Laser Sept 18 th 2006 The information in this presentation is under embargo until 9/18/06 10:00 AM PST 1 Agenda Dr. Mario Paniccia Director, Photonics Technology
OVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 7 03 Litho In U.S.A. (cre) 1 Part No. OVEN PARTS NOTE: The screws and nuts required to attach a part are listed immediately following that part.
VLSI Fabrication Process
VLSI Fabrication Process Om prakash 5 th sem ASCT, Bhopal omprakashsony@gmail.com Manisha Kumari 5 th sem ASCT, Bhopal Manisha2686@gmail.com Abstract VLSI stands for "Very Large Scale Integration". This
60 Series Pilot Regulator
0 Series Pilot Regulator Repair Parts List www.elster-americanmeter.com Read carefully and follow all instructions shipped with this regulator. The incorrect installation of this equipment could result
Applicant Tracking System Job Aids. Prepared by:
Applicant Tracking System Job Aids Prepared by: Contents System Navigation and My Setup Information for Users... 1 Creating Requisitions... 4 Duplicating Requisitions... 6 Requesting an Approval... 7 Viewing
How to Complete a Property Repair Accident - Mandatory Information Form
How to complete the form Mandatory Information - Please provide a response to all the questions in the mandatory section, including comprehensive details relating to the incident and the extent of the
DYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
RESTORING STRAUMANN IMPLANTS WITH LOCATOR ABUTMENTS
RESTORING STRAUMANN IMPLANTS WITH LOCATOR ABUTMENTS Straumann is the industrial partner of the ITI (International Team for Implantology) in the areas of research, development, and education. CONTENTS Product
NXP PN548 (65V10) Near Field Communication Module
NXP PN548 (65V10) Module Basic Functional Analysis 1891 Robertson Road, Suite 500, Ottawa, ON K2H 5B7 Canada Tel: 613-829-0414 chipworks.com Basic Functional Analysis 2 Some of the information in this
How To Implant Anneal Ion Beam
ROCHESTER INSTITUTE OF TECHNOLOGY MICROELECTRONIC ENGINEERING MEMS Ion Implant Dr. Lynn Fuller webpage: http://people.rit.edu/lffeee Electrical and Microelectronic Engineering Rochester Institute of Technology
Buildings Construction Procurement Strategy
Buildings Construction Procurement Strategy Graham Strickleton Site, Buildings and Power supplies Procurement Manager JOURNEE DEDIEE AUX INDUSTRIELS ET AUX MEMBRES DU RESEAU A.P.I Disclaimer: these slides
Supertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit
32-Channel High Voltage Amplifier Array Features 32 independent high voltage amplifiers 3V operating voltage 295V output voltage 2.2V/µs typical output slew rate Adjustable output current source limit
Grooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
1ED Compact A new high performance, cost efficient, high voltage gate driver IC family
1ED Compact A new high performance, cost efficient, high voltage gate driver IC family Heiko Rettinger, Infineon Technologies AG, Am Campeon 1-12, 85579 Neubiberg, Germany, heiko.rettinger@infineon.com
IRRIGATION PUMPING Table of Contents - Section 900
IRRIGATION PUMPING Table of Contents - Section 900 PARAGRAPH 900.1 GENERAL 1 900.2 METERING REQUIREMENTS 1 900.3 CUSTOMER S CONTROL EQUIPMENT 2 900.4 SERVICE CONDUCTOR REQUIREMENTS 2 900.5 RECOMMENDATIONS
AFE424 SERVICE PARTS
This is the parts list for the AFE. When looking up part numbers, always check the complete model and serial numbers to be certain of ordering the correct parts. The Air Cooled model has also been manufactured