Brushless DC Motor. Product Number Code For Brushless DC Motor BL Series number Body length: 30mm Frame size: 16mm Brushless DC motor

Transcription

1 TEL: +44(0) FX: +44(0)

2 Product Number Code For Brushless DC Motor BL Series number Body length: 30mm Frame size: 6mm Brushless DC motor 45 TEL: +44(0) FX: +44(0)

3 BL42 GENERL SPECIFICTIONS PERFORMNCE CURE No. of phase 3 No. of polar 8 inding type Delta Hall effect angle 20 degree electrical angle Shaft run out 0.025mm Radial play 0.02mm@450g End play 0.08mm@450g Max. radial force 20mm from the flange Max. axial force 0N Insulation class Class B 500DC for one minute Insulation resistance 00M Min., 500DC ELECTRICL SPECIFICTIONS Continuous stall torque( tcu 80 ) Continuous torque at rated speed Max. peak torque(duty cycle 0%) Rated speed Output power at rated speed Terminal resistance at 20 Line to line inductance B.E.M.F. at nominal speed Locked rotor rated current Max. peak current Body length Mass RPM gcm 2 / mh mm Kg BL DIMENSIONS: TEL: +44(0) FX: +44(0)

4 BL(S)57 SERIES Note: Square front end-bell BLS57; Round front end-bell BL57 GENERL SPECIFICTIONS No. of phase No. of polar inding type Hall effect angle Shaft run out Radial play End play Max. radial force Max. axial force Operating range mbient temperature Insulation class Insulation resistance 3 4 Delta 20 degree electrical angle 0.025mm 0.025mm@460g 0.025mm@g 20mm from the flange 5N Max. 000m.above sea level -20 to +50 Class B 500DC for one minute 00M Min., 500DC PERFORMNCE CURE 47 TEL: +44(0) FX: +44(0)

5 ELECTRICL SPECIFICTIONS BL(S) BL(S) BL(S) BL(S) BL(S) Continuous stall torque( tcu 80 ) Continuous torque at rated speed Max. peak torque(duty cycle 0%) Rated speed RPM Output power at rated speed Kgm 2 3* *0-6.9* *0-6 23*0-6 / Terminal resistance at Line to line inductance mh B.E.M.F. at nominal speed Locked rotor rated current Max. peak current Body length mm Mass Kg DIMENSIONS: TEL: +44(0) FX: +44(0)

6 BL5883 SERIES GENERL SPECIFICTIONS No. of phase 3 No. of polar 2 Sensor Hall sensor Driver MC33033 Length 83mm eight 998g Operating temperature range -30 to +85 Commutation Electronically commutation Bearing EZO & NMB Housing material luminum, black anodized Magnet material Nd-Fe-B Direction of rotation Electronically reversible Insulation class Class B 500DC for one minute Insulation resistance 00M Min., 500DC ELECTRICL SPECIFICTIONS BL BL BL BL Nominal oltage Phase to phase resistance Output power Efficiency (max.) % No-load speed rpm No-load current Stall torque m Friction torque m Back EMF constant m/rpm m/ Slope of speed vs torque curve rpm/m Mechanical time constant ms ngular acceleration(max.) g.cm rad/s DIMENSIONS: 49 TEL: +44(0) FX: +44(0)

7 BL7550 SERIES GENERL SPECIFICTIONS PERFORMNCE CURE No. of phase No. of polar inding type Hall effect angle Shaft run out Radial play End play Max. radial force Max. axial force Operating range mbient temperature Insulation class Insulation resistance 3 4 Delta 20 degree electrical angle 0.025mm 0.025mm@460g 0.025mm@g 20mm from the flange 30N Max. 000m.above sea level -20 to +50 Class B 500DC for one minute 00M Min., 500DC ELECTRICL SPECIFICTIONS Normal voltage Continuous stall torque( tcu 80 ) DC BL BL Continuous torque at rated speed Max. peak torque(duty cycle 0%) Rated speed RPM Output power at rated speed Kgmm / Terminal resistance at Line to line inductance uh B.E.M.F. at nominal speed Locked rotor rated current.6 Max. peak current 33 3 Mass Kg DIMENSIONS: TEL: +44(0) FX: +44(0)

8 BL8488 SERIES GENERL SPECIFICTIONS No. of phase 3 No. of polar 4 Sensor Hall sensor Driver MC33033 Length 88mm Operating temperature range -30 to +85 Commutation Electronically commutation Bearing NSK Housing material luminum, black anodized Magnet material Nd-Fe-B Direction of rotation Electronically reversible Insulation class Class B 500DC for one minute Insulation resistance 00M Min., 500DC ELECTRICL SPECIFICTIONS BL BL Nominal oltage Phase to phase resistance Output power Efficiency (max.) % 72 8 No-load speed rpm No-load current Stall torque m Friction torque m 2 2 Back EMF constant m/rpm m/ Slope of speed vs torque curve rpm/m.7.08 Mechanical time constant ms ngular acceleration(max.) g.cm rad/s DIMENSIONS: 5 TEL: +44(0) FX: +44(0)