Flamco Stainless steel mountings

Transcription

1 S TA I N L E S S S T E E L M O U N T I N G S 9 Flamco Stainless steel mountings BRS-A BSF - SS RAIL R - SS GP - SS Edition 2007 / UK

2 Stainless steel mountings Flamco offers the best attachment options in The extensive range of Flamco mounting material consists of Sendzimir or electrolytically galvanized steel, perfectly suitable for most mechanical applications, such as central heating and cooling installations. In industrial installations and in the food processing industry, however, stainless steel quality mounting material is often required. For these types of installations Flamco offers stainless steel mounting material made of stainless steel 304 or stainless steel 316 quality. Application of Flamco SS mounting material in: Laboratories. Chemical industry. Corrosive environments. Medical installations. Abattoirs. Food processing industry. Sewage treatment plants. Dairy plants. Rail R - SS. Nut M - SS. rod D - SS. BRS-A bracket. The risk of corrosion does not allow stainless steel to come into direct contact with other ferrous metals. Flamco products that have not been included in this brochure may also be available in stainless steel quality upon request. (SLIDING) NUTS M..S WASHERS S - BOTH SS Sliding nuts M..s and washers S - both SS For easy assembly of a suspension in Flamco rail. Sliding nuts and washers can be tilted inside the Flamco rail at the point of suspension. Tables with types and technical specifications: page

3 SS mounting material Stainless steel mountings BSA - SS BRS - SS BRS-A - SS BSF - SS RAIL R - SS RAIL CONSOLES R.X... - SS BSA SS The advantages of the BSA brackets (see brochure 1, page 1.2 and 1.3), but made from 316 stainless steel. Sizes range from mm to mm. BRS - SS Sizes range from 3 /8 to 3 /8. All types fitted with M 8 / M 10 combinut. Small overall s optional. Stainless steel 316. BRS-A - SS Same size range as with the BRS brackets, but with sound-insulating rubber insert. Fitted with M 8 / M 10 combinut. Ideal for installations in confined locations. Stainless steel 316. BSF - SS The advantages of the Flamco BSF brackets (see brochure 1, page 1.4), but made of 316 stainless steel. Sizes range from 3 /8 to 8. All types fitted with 1 2 / M 10 combinut. Rail R - SS Information about Flamco rail in brochure 6, pages 6.2 and 6.3. s R 1 and R 4 are standard available in stainless steel. Easy and quick assembly with adjustment facility. Rail consoles R.x... - SS For horizontal or vertical attachment for support or suspension. Secure mounting. THREADED RODS D - SS SCREW STUDS HO - SS BASE PLATES GP - SS CAPTIVE BOLT SETS HBS - SS ANCHOR BOLT - SS INNER HEXAGON SCREW - SS rods D - SS For all applications with threaded rods. Standard length of 1 metre. Stainless steel 304. Screw Studs HO - SS For attaching BRS, BSA-SS, BSF-SS or BRS-A brackets. With flats for wrench. Stainless steel 304. Base plates GP - SS For rigid attachment to wall or ceiling of bracket with threaded rod or threaded. Fitted with slotted holes for easy assembly. Stainless steel 304. Captive bolt sets HBS - SS A preassembled set consists of a captive bolt, nut and washer. Quick and easy assembly. Stainless steel 304. Anchor bolt - SS Hammer pin made from stainless steel 304. Inner hexagon screw - SS Screw made from stainless steel

4 Stainless steel mountings BRS, BRS-A and BSH SS brackets BRS and BRS-A brackets sizes range from 3 /8 to 8. All types fitted with M 8 / M 10 combinut. Ideal for installation in confined spaces. BRS-A fitted with sound-insulating rubber insert. All BRS and BRS-A bracket types are fitted with stainless steel M 8 / 10 combinut. Versions and s BRS brackets Pipe inner diameter in Ø workload mm inch N mm Versions and s BRS-A brackets Pipe inner diameter in Ø Bolts BRS 8 / 10 x 3 / /8 M 8 / x 2.0 M 6 x BRS 8 / 10 x 1 / /2 M 8 / x 2.0 M 6 x BRS 8 / 10 x 1 / /4 M 8 / x 2.0 M 6 x BRS 8 / 10 x 1 1 / M 8 / x 2.0 M 6 x BRS 8 / 10 x 1 1 / /4 M 8 / x 2.0 M 6 x BRS 8 / 10 x 1 1 / /2 M 8 / x 2.0 M 6 x BRS 8 / 10 x M 8 / x 2.0 M 6 x BRS 8 / 10 x 2 1 / M 8 / x 2.0 M 6 x BRS 8 / 10 x M 8 / x 2.0 M 6 x BRS 8 / 10 x 2 1 / /2 M 8 / x 2.0 M 6 x BRS 8 / 10 x 3 1 / M 8 / x 2.0 M 6 x BRS 8 / 10 x 3 1 / /2 M 8 / x 2.0 M 6 x BRS 8 / 10 x 4 1 / M 8 / x 2.0 M 6 x BRS 8 / 10 x M 8 / x 2.0 M 6 x BRS 8 / 10 x M 8 / x 2.0 M 6 x BRS 8 / 10 x M 8 / x 2.0 M 6 x BRS 8 / 10 x M 8 / x 2.0 M 6 x workload* at 19 db(a) mm inch N mm Bolts BRS-A 8 / 10 x 3 / /8 M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 1 / /2 M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 1 / /4 M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 1 1 / M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 1 1 / /4 M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 1 1 / /2 M 8 / x 2.0 M 6 x BRS-A 8 / 10 x M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 2 1 / M 8 / x 2.0 M 6 x BRS-A 8 / 10 x M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 2 1 / /2 M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 3 1 / M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 3 1 / /2 M 8 / x 2.0 M 6 x BRS-A 8 / 10 x 4 1 / M 8 / x 2.0 M 6 x BRS-A 8 / 10 x M 8 / x 2.0 M 6 x BRS-A 8 / 10 x M 8 / x 2.0 M 6 x BRS-A 8 / 10 x M 8 / x 2.0 M 6 x BRS-A 8 / 10 x M 8 / x 2.0 M 6 x BRS BRS-A * In order to guarantee efficient noise reduction we advise that the specified load of the bracket should not be exceeded! Versions and s BSH SS Pipe inner diameter in Ø mm inch mm BSH SS /4 M 8 / M x 1.5 on request BSH SS /8 M 8 / M x 1.5 on request BSH SS /2 M 8 / M x 1.5 on request BSH SS /4 M 8 / M x 1.5 on request BSH SS M 8 / M x 1.5 on request BSH SS /4 M 8 / M x 1.5 on request BSH SS /2 M 8 / M x 1.5 on request BSH SS M 8 / M x 1.5 on request BSH SS M 8 / M x 1.5 on request BSH - SS 9.4

5 BSA SS and BSF SS brackets The well-known Flamco BSA brackets, made from RVS 316 stainless steel. BSA SS sizes range from mm to mm. BSA-SS fitted with sound-insulating rubber insert. The well-known Flamco BSF brackets, made from RVS 316 stainless steel. Sizes range from 3 8 to 8. All BSA SS and BSF SS types are fitted with stainless steel 1 2 / M 10 combinut. Stainless steel mountings Versions and s of BSA SS brackets Pipe outer diameter Ø from to... workload* at 19 db(a) mm inch N mm BSA SS /2 / M x BSA SS /8 1 /2 / M x BSA SS /2 1 /2 / M x BSA SS /4 1 /2 / M x BSA SS /2 / M x BSA SS /4 1 /2 / M x BSA SS /2 1 /2 / M x BSA SS /2 / M x BSA SS /2 / M x BSA SS /2 / M x BSA SS /2 1 /2 / M x BSA SS /2 / M x BSA SS /2 / M x BSA SS /2 / M x BSA SS /2 / M x Versions and s of BSF SS brackets * In order to guarantee efficient noise reduction we advise that the specified load of the bracket should not exceeded! Pipe outer diameter Ø from to... workload mm inch N mm BSF SS /8 1 /2 / M x 2, BSF SS /2 1 /2 / M x 2, BSF SS /4 1 /2 / M x 2, BSF SS /2 / M x 2, BSF SS /4 1 /2 / M x 2, BSF SS /2 1 /2 / M x 2, BSF SS /2 / M x 2, BSF SS /2 1 /2 / M x 2, BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSF SS /2 / M x BSA - SS BSF - SS 9.5

6 Stainless steel mountings RAIL R SS, RAIL CONSOLES R.x... SS, (SLIDING) NUTS SS and WASHERS - SS With Rail SS, easy and quick assembly with adjustment facility Rail consoles SS, for horizontal or vertical attachment for support or suspension. Secure mounting. (Sliding) nuts SS and washers SS for easy assembly of a suspension in Flamco rail. Sliding nuts SS and washers - SS can be tilted inside the Flamco rail at the point of suspension. Next, turn a quarter turn and tighten using a nut. Versions and s rail R - SS Dimensions in mm h b d e s t R 1 - SS R 4 - SS Versions and s rail consoles R.x... SS Flamco rail Dimensions in mm L A R 1 x SS R 1 - SS R 1 x SS R 1 - SS R 1 x SS R 1 - SS R 1 x SS R 1 - SS R 4 x SS R 4 - SS R 4 x SS R 4 - SS R 1 - SS Versions and s sliding nuts M..s - SS Suitable for Flamco rail M 8s - SS M 8 R 1 - SS, R 4 - SS M 10s - SS M 10 R 1 - SS, R 4 - SS Versions and s washers S - SS Suitable for Flamco raill S 8 - SS M 8 R 1 - SS, R 4 - SS S 10 - SS M 10 R 1 - SS, R 4 - SS S 12 - SS M 12 R 1 - SS, R 4 - SS R 4 - SS Versions and s nuts M - SS M 8 - SS M M 10 - SS M M 12 - SS M WASHER - SS RAIL CONSOLE - SS SLIDING NUT - SS M - SS 9.6

7 THREADED RODS D SS, SCREWS STUDS HO SS, BASE PLATES GP SS, CAPTIVE BOLT SETS HBS SS, ANCHOR BOLT SS and INNER HEXAGON SCREW SS rod D SS for all applications with threaded rods. Screw Studs HO SS for attaching BRS, BSA-SS, BSF-SS or BRS-A brackets. Base plates GP SS for rigid attachment to wall or ceiling of brackets with threaded rod or threaded. Stainless steel mountings Versions and s threaded rods D - SS Length m workload N D 8 - SS M D 10 - SS M D 12 - SS M D - SS Versions and s screw studs HO - SS Length mm HO 8 x 60 - SS M HO 8 x 80 - SS M HO 8 x SS M HO 10 x 80 - SS M HO 10 x SS M HO 10 x SS M HO - SS GP - SS Versions and s base plates GP - SS Dimensions in mm A B H D E slotted holes GP 8 / x 20 - SS M 8 / x GP 8-80 x 30 - SS M x GP x 30 - SS M x GP 1 /2 / x 30 - SS 1 /2 / M x GP 1 /2-80 x 30 - SS 1 / x GP 3 /4-120 x 40 - SS 3 / x HBS - SS Versions and s captive bolt sets HBS - SS Dimensions in mm A B C D E HBS - SS 8 x 30 M 8 x HBS - SS 8 x 40 M 8 x HBS - SS 10 x 40 M 10 x HBS - SS 10 x 60 M 10 x Versions and s anchor bolt - SS Anchor bolt - SS M Anchor bolt - SS M Anchor bolt - SS M Versions and s inner hexagon screw - SS Dimensions in mm BZS - SS M 8 x BZS - SS M 10 x BZS - SS M 12 x ANCHOR BOLT - SS BZS - SS 9.7

8 STAINLESS STEEL MOUNTINGS BRS-A CONTENTS PAGE Flamco mounting material in SS 9.2/9.3 Charts and technical data 9.4/9.7 Flamco UK Limited Unit 4, St. Michael s Road Lea Green Industrial Estate St. Helens, Merseyside WA9 4WZ BSF - SS Tel.: +44 (0) Fax: +44 (0) info@flamco.co.uk RAIL R - SS There is more information on the CD that GP - SS accompanies this brochure. Copyright Flamco UK Limited. No part of this publication may be reproduced or published in any way without explicit mention of the source. The data listed are solely applicable to Flamco products. Flamco UK Limited shall accept no liability whatsoever for incorrect use, application or interpretation of the technical information. Flamco UK Limited reserves the right to make technical alterations Flamco UK Limited conditions of sale apply