PROFIBUS cable. PROFIBUS DP cables Non-Ex (Hazardous) applications Ex (Hazardous) applications

Transcription

1 Data Sheet 10/ EN Rev. D PROFIBUS cable PROFIBUS DP cables Non-Ex (Hazardous) applications Ex (Hazardous) applications PROFIBUS PA cables Non-Ex (Hazardous) applications Ex (Hazardous) applications

2 PROFIBUS cable PROFIBUS DP cable (solid) M10773 Application M10775 (Example Sketch) Internet NDC110-NO, NDC110-EX Standard zero halogen fieldbus cable for PROFIBUS DP/FMS and FIP, suitable for 9-pin SUB-D [IP20] and M12 [IP67] connectors. [FB-02YS(St+Ce)H] Recommended for indoor and outdoor installation, in dry and wet locations, on racks, on trys and in Not suitable for direct burial. Also especially in locations where the low smoke, zero halogen and flame retardant characteristics are important (e. g. public buildings, hospitals, power stations etc.). Standard IEC Part 2 Classification Typ A Interface RS 485(-IS) Conductor plain annealed copper wire, solid AWG 22/ mm 2, ø 0.65 mm Insulation foamed polyethylene with skin layer Color code Screen Outer sheath Cable marking a(n)-core: green, b(p)-core: red plastic coated aluminum tape, metallic surface outside in contact with a tinned copper drain wire and tinned copper wire braid Low smoke, zero halogen flame retardant compound LSZH, color: violet (NDC110-NO), blue [IS] (NDC110-EX) FIELDBUS CABLE IEC Ω PLTC PROFIBUS FMS/DP 1 PR 22 AWG OS (UL) 75 C SUN RES E length marking Overall diameter 7.9 ±0,5 mm Weight approx. 70 kg/km Max. pulling tension 35 N Min. bending radius 7.5 x cable overall diameter Temperature range C during operation, C during installation UV resistant UL 1581 article 1200 Oil resistant ICEA S (Test temperature 60 C; duration 4 h. Retention: min. 60 % of tensile strength/min. 60 % of elongation) Flame propagation Test on single cable: UL 13 (vertical tray), Test on bunched cable: IEC (Cat. C) Smoke density low, IEC and 2 (L.T. > 60%) Halogen free yes, IEC , 0 % Degree of acidity of gases IEC (ph 4.3, c 10 μs/mm) Limiting Oxygen Index (LOI) ASTM D 2863, (min. 30 %) Explosion protection (NDC110-EX only) for Ex i applications [IS], Class I / II Division 2 acc. to NEC (B) and NEC (B) or Zone 1 / 2, Group II, acc FISCO-approval Approval CE, UL (listed as PLTC acc. to UL 13) 2 10/ EN Rev. D PROFIBUS cable

3 PROFIBUS DP cable (solid) M10773 NDC110-NO, NDC110-EX Electrical properties at 20 C Conductor resistance (Loop) Screen resistance Attenuation at 0.25 / / 1.25 / / 16 MHz Inductance Mutual capacitance Capac. unbalance to earth Impedance at 3 MHz Test voltage (Core / core and core / screen) Operating voltage max. 110 Ω/km nom. 12 Ω/km nom. 6 / 9 / 12 / 18 / 40 db/km nom. 0.9 mh/km max. 30 nf/km max. 1.5 nf/km 150 ±15 Ω 1500 V max. 300 V PROFIBUS cable 10/ EN Rev. D 3

4 PROFIBUS cable PROFIBUS PA cable Application M10772 (Example Sketch) Internet NPC080-NO, NPC080-EX NPC150-NO, NPC150-EX NPC250-NO, NPC250-EX Standard fieldbus cable for PROFIBUS Long-distance fieldbus cable for PROFIBUS PA with additional power supply for PA with additional power supply for the the devices, cable with low voltage drop along the line. devices, suitable for insulation [FB-2Y(St+Ce)Y-fl] displacement connections or M12 connectors. [FB-02YS(St+Ce)Y-fl] Recommended for indoor and outdoor installation, in dry and wet locations, on racks, on trys and in Not suitable for direct burial. Standard IEC Part 2 Classification Typ A Interface MBP-LP(-IS), IEC Conductor plain annealed copper wire, stranded AWG 18/ mm 2 AWG 16/7 1.3 mm 2 AWG 14/7 2.1 mm 2 Insulation foamed polyethylene with skin layer polyethylene Color code Screen Outer sheath Cable marking a(-)-core: green, b(+)-core: red plastic coated aluminium tape, metallic surface outside in contact with a tinned copper drain wire and tinned copper wire braid polyvinyl chloride PVC, color: black (NPCnnn-NO), blue [IS] (NPCnnn-EX) FIELDBUS CABLE IEC Ω PLTC PROFIBUS PA 1 PR xx AWG OS (UL) 75 C SUN RES E length marking Overall diameter 7.6 ±0,4 mm 9.4 ±0,6 mm 11.5 ±1.0 mm Weight approx. 75 kg/km approx. 114 kg/km approx. 166 kg/km Max. pulling tension 90 N 130 N 200 N Min. bending radius 7.5 x cable overall diameter Temperature range C during operation, C for installation UV resistant UL 1581 article 1200 Oil resistant ICEA S Flame propagation Test on single cable: UL 13 (vertical tray), Test on bunched cable: IEC (Cat. C) Smoke density Halogen free HCL emission IEC , max. 17 % Oxygen index of outer sheath ASTM D 2863 (min. 30 %) Explosion protection (NPCnnn-EX only) for Ex i applications [IS], Class I / II Division 2 acc. to NEC (B) and NEC (B) or Zone 1 / 2, Group II, acc. to IEC FISCO approval FISCO not for passive components Approval CE, UL (listed as PLTC acc. to UL 13) 4 10/ EN Rev. D PROFIBUS cable

5 PROFIBUS PA cable NPC080-NO, NPC080-EX NPC150-NO, NPC150-EX NPC250-NO, NPC250-EX Electrical properties at 20 C Conductor resista. max Ω/km max Ω/km max Ω/km (Loop) (R c ) Screen resistance nom. 12 Ω/km Attenuation at 39 khz max. 3.0 db/km Inductance (L c ) nom. 0.7 mh/km Mutual capacitance (C c ) nom. 60 nf/km Capac. unbalance to max. 4 nf/km earth Impedance 100 ±20 Ω Propagation delay max. 1.7 μs/km change (7.9 khz 39 khz) Test voltage 1500 V (Core / core and core / screen) Operating voltage max. 300 V PROFIBUS cable 10/ EN Rev. D 5

6 PROFIBUS cable Ordering information PROFIBUS DP cable Catalog No. NDC110-NO 65 m ( ) PROFIBUS DP cable solid, violet, 2 x 0.33 mm 2 (AWG22/1), Type A. 330 m ( ) (Note 1) PROFIBUS DP cable solid, violet, 2 x 0.33 mm 2 (AWG22/1), Type A m ( ) (Note 1) PROFIBUS DP cable solid, violet, 2 x 0.33 mm 2 (AWG22/1), Type A. NDC110-EX 65 m ( ) PROFIBUS DP cable solid, blue!, 2 x 0.33 mm 2 (AWG22/1), Type A, for intrinsic safety applications (Ex i). 330 m ( ) (Note 1) PROFIBUS DP cable solid, blue!, 2 x 0.33 mm 2 (AWG22/1), Type A, for intrinsic safety applications (Ex i) m ( ) (Note 1) PROFIBUS DP cable solid, blue!, 2 x 0.33 mm 2 (AWG22/1), Type A, for intrinsic safety applications (Ex i). Note 1: incl. no-return cable drum 6 10/ EN Rev. D PROFIBUS cable

7 PROFIBUS PA cable Catalog No. NPC080-NO 65 m ( ) PROFIBUS PA cable, black, 2 x 0.88 mm 2 (AWG18/7), Type A. Loop resistance 43.6 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in 330 m ( ) (Note 1) PROFIBUS PA cable, black, 2 x 0.88 mm 2 (AWG18/7), Type A. Loop resistance 43.6 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in 1000 m ( ) (Note 1) PROFIBUS PA cable, black, 2 x 0.88 mm 2 (AWG18/7), Type A. Loop resistance 43.6 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in NPC150-NO 1000 m ( ) (Note 1) PROFIBUS PA cable, black, 2 x 1.3 mm 2 (AWG16/7), Type A. Loop resistance 28.5 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in NPC250-NO 1000 m ( ) (Note 1) PROFIBUS PA cable, black, 2 x 2.1 mm 2 (AWG14/7), Type A. Loop resistance 17.9 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in NPC080-EX 65 m ( ) PROFIBUS PA cable, blue, 2 x 0.88 mm 2 (AWG18/7), Type A, for intrinsic safety applications (Ex i). Loop resistance 43.6 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in 330 m ( ) (Note 1) PROFIBUS PA cable, blue, 2 x 0.88 mm 2 (AWG18/7), Type A, for intrinsic safety applications (Ex i). Loop resistance 43.6 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in 1000 m ( ) (Note 1) PROFIBUS PA cable, blue, 2 x 0.88 mm 2 (AWG18/7), Type A, for intrinsic safety applications (Ex i). Loop resistance 43.6 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in NPC150-EX 1000 m ( ) (Note 1) PROFIBUS PA cable, blue, 2 x 1.3 mm 2 (AWG16/7), Type A, for intrinsic safety applications (Ex i). Loop resistance 28.5 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in NPC250-EX 1000 m ( ) (Note 1) PROFIBUS PA cable, blue, 2 x 2.1 mm 2 (AWG14/7), Type A, for intrinsic safety applications (Ex i). Loop resistance 17.9 Ω/km, UL approval, incl. special drain wire, for fixed installation indoor and outdoor, on racks and in Note 1: incl. no-return cable drum PROFIBUS cable 10/ EN Rev. D 7

8 Contact us ABB Automation GmbH Service Instrumentation Kallstadter Straße Mannheim, Germany Customer service center: +49 (0) * automation.service@de.abb.com * 14 cents/minute from German landlines, max. 42 cents/minute from mobiles. Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents - in whole or in parts is forbidden without prior written consent of ABB. 10/ EN Rev. D Copyright 2012 ABB All rights reserved 3KXN647000R1001 Sales Service