Why FOUNDATION Fieldbus?

Transcription

1 Product Bulletin PB 244-R3 Fieldbus Cables Fieldbus Tye A cables rovide installation flexibility in many different environments, including outdoors and where multile or extended cable runs are required. Fieldbus Tye B and high-seed cables also available. Belden Offers a Comlete Line DataBus Cables for FOUNDATION Fieldbus Alications with C(UL) and UL Tray Ratings, Exanded Multi-air Caabilities and Exanded Temerature and Use Ratings Be Certain with Belden Why FOUNDATION Fieldbus? FOUNDATION Fieldbus is the dominant industrial network in the oil, gas and etrochemical industries as well as most rocess industries. Belden Fieldbus cables are designed to withstand the destructive effects temerature extremes, humidity/moisture, dust and oil. In harsh environments such as oil and gas extraction and refining sites, ultraviolet radiation from extensive exosure to the sun can shorten cable life. With the high cost downtime in industrial alications, articularly in remote locations, investing in cable with roven erformance and reliability can significantly reduce the likelihood system failure. With FOUNDATION Fieldbus, end users have the freedom to imlement tightly integrated digital control based on a unified system architecture and a high-seed backbone (HSE) for lant oerations. This, in turn, removes the constraints on device and sub-system interoerability. Fieldbus Secification IEC (ISA/SP-50) Fieldbus is an all-digital, serial, two-way communications rotocol that standardizes the interconnection field devices at a communications rate kb/s. The field devices are accessible to communication networks (running at 1 or 2.5 Mb/s), through linking devices. By distributing control into field devices, Fieldbus users reduce the amount I/O and control equiment required. A Fieldbuscomliant twisted-air wires carries signals between the field devices and the networks. Fieldbus also reduces the number Intrinsically Safe (IS) barriers, cabinets, cables and connectors required. Since the wire air can suort multile functions within a single device (such as diagnostics, control and auto error correction), the twisted-air cable becomes an integral art a more efficient, more reliable, and more costeffective industrial control system. Fieldbus Cabling Features The number devices ossible on a Fieldbus link will vary deending on factors such as the ower consumtion each device, the use reeaters, signal attenuation, tye cable used and distance. The table below rovides suggested transmission distances (cable lengths) for each tye cable. Fieldbus Tye Communication Rate Transmission Distance Ft. / m A Kb/s 6,232 / 1900 B Kb/s 3,936 / 1200 High Seed 1.0 MHz 2.5 MHz 2,460 / 750 1,640 / 500

2 Belden Fieldbus cable features include: Comliant with Fieldbus Sec IEC (ISA/SP-50) Excellent electrical characteristics Low caacitance (for long runs) Versions in 22, 18, 16 and 14 AWG stranded tinned coer conductors Standard multi-air cables available in 2 to 24 airs and u to 50 airs deending on construction. Versions available with Beldfoil shields and Beldfoil Plus Braid shields, PLTC, and versions as well as C(UL) CIC Tye TC are available. Easily identifiable Orange jacket Blue jacket available for Intrinsically Safe alications Suitable for use in Class 1, Div. 2 alications RoHS comliant and CE aroved rated as listed Fieldbus High Seed Ethernet (HSE) Cables Fieldbus has chosen Ethernet for HSE control backbone 100Mb/s transmissions. To hel you with your selection Category 5e and Category 6 cables, Belden fers its DataTuff Industrial Ethernet Cable Selection Guide. For more information on Belden DataTuff cables, lease call Belden or ask for the Industrial Ethernet New Product Bulletin. C(UL) Tray-rated Cables Belden fers C(UL) and UL tray-rated cable. This Tye A cable fers Belden reliability in harsh environments such as the oil sands Canada. The single- and multi-air cables come with XLP insulation and comly with both Canadian and US regulatory requirements. XLP fers imroved cut through and chemical resistance comared to other insulators. Custom Cable Constructions As always with Belden industrial cables, custom constructions are available: Aluminum or Steel Interlocked Armor CPE jacket or LSOH jacket Various jacket colors Alternate Black and White color-coded airs Multi-air Tye A, 300V, individually and overall shielded and PVC jacketed with u to 50-air caability Multi-air Tye B 22 AWG, PLTC-rated, individually and/or overall shielded Industrial Data Solutions Industrial Data UL NEC/ C(UL) CEC Tye Pairs Ft. m Lbs. kg Nom. DCR Fieldbus Stranded TC Beldfoil ( Shield Coverage) TC Polyolefin Insulation Orange or Intrinsically Safe Blue Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange) Tye A 3076F Beldfoil Shield CEC: FT F Aluminum Interlocked Armor F Steel Interlocked Armor YM47023 CPE Jacketed Version YM46698 Black & White Color-coded Pairs YM47090 Various Jacket Colors C(UL): 600V AWM I/II AB Blue is only available in 1,000 ft. ut-u Final ut-u length may vary ±10% from length shown. Fieldbus Stranded TC + Overall Beldfoil ( Shield Coverage) TC s Polyolefin Insulation Orange or Intrinsically Safe Blue/Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange and Numbered) MULTI-PAIR Tye A 1327A CEC: FT4 s 1328A CEC: FT

3 Be Certain with Belden Industrial Data Solutions Industrial Data UL NEC/ C(UL) CEC Tye Pairs Ft. m Lbs. kg Nom. DCR Fieldbus Stranded TC + Overall Beldfoil ( Shield Coverage) TC s Polyolefin Insulation Orange or Intrinsically Safe Blue/Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange and Numbered) 1329A CEC: FT A 1331A 1332A 1333A 1359A CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT Direct burial rated; IEC (Cat C); IEEE 1202/383 C(UL): 600V AWM I/II AB * Available in color orange only, other colors quoted to orded * Continuously Corrugated AL Armor Polyolefin Insulation PVC Inner and Orange Sunlight- and Oil-resistant PVC Outer Jacket Tye A F PLTC, % ITC, Beldfoil Nominal -40 C Cold Bend Shield Core O.D. CEC: FT4 Final ut-u length may vary ±10% from length shown. Fieldbus Stranded TC + Overall Beldfoil ( Shield Coverage) TC s Polyolefin Insulation Orange Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange) Tye A 1360A Beldfoil Shield CEC: FT4 1361A CEC: FT

4 Industrial Data Solutions Industrial Data UL NEC/ C(UL) CEC Tye Pairs Ft. m Lbs. kg Nom. DCR Fieldbus Stranded TC + Overall Beldfoil ( Shield Coverage) TC s Polyolefin Insulation Orange Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange) 1362A CEC: FT4 s 1363A 1364A 1365A 1366A 1367A CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT4 Note: 50 air construction available as quote to order C(UL): 600V AWM I/II AB Fieldbus Stranded TC Beldfoil ( Shield Coverage) + 65% TC Braid TC Polyolefin Insulation Orange or Intrinsically Safe Blue Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange) Tye A 1334A Beldfoil % TC Braid CEC: FT4 IEC (Cat C); IEEE 1202/383 Fieldbus Stranded TC Overall Beldfoil ( Shield Coverage) + 65% TC Braid TC Polyolefin Insulation Orange or Intrinsically Safe Blue Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange) *Tye A 1335A Beldfoil % TC Braid CEC: FT4 IEC (Cat C); IEEE 1202/383 DCR = DC Resistance FHDPE = Foamed High Density Polyethylene PO = Polyolefin TC = * Although Tye A secification references nominal, Belden 1335A and 1336A meet all other Tye A requirements. 4

5 Be Certain with Belden Industrial Data Solutions Industrial Data UL NEC/ C(UL) CEC Tye Pairs Ft. m Lbs. kg Nom. DCR Fieldbus 14 AWG Stranded (7x22) TC Overall Beldfoil ( Shield Coverage) + 65% TC Braid TC Polyolefin Insulation Orange or Intrinsically Safe Blue Sunlight- and Oil-resistant PVC Jacket (Color Code: Blue, Orange) Tye A 1336A AWG (7x22) Beldfoil % TC Ω/M' Braid CEC: FT4 9.3Ω/km IEC (Cat C) Fieldbus Stranded TC Overall Beldfoil ( Shield Coverage) TC s Tye A 2100A PLTC,, Beldfoil Shield CEC: FT4 Single-air s Multi-air 2101A 2102A 2103A 2104A 2105A 2106A 2107A 2108A PLTC,, CEC: FT4 PLTC,, CEC: FT4 PLTC,, CEC: FT4 PLTC,, CEC: FT4 PLTC,, CEC: FT4 PLTC,, CEC: FT4 PLTC,, CEC: FT4 PLTC/, CEC: FT Blue is only available in 1,000 ft. ut-u Final ut-u length may vary ±10% from length shown. 5

6 Industrial Data Solutions Industrial Data UL NEC/ C(UL) CEC Tye Pairs Ft. m Lbs. kg Nom. DCR Fieldbus Stranded TC Overall Beldfoil ( Shield Coverage) TC s Tye A 2109A Beldfoil Shield CEC: FT4 Single-air s Multi-air 2110A 2111A 2112A 2113A 2114A 2115A 2116A 2117A CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT4 CEC: FT Blue is only available in 1,000 ft. ut-u Final ut-u length may vary ±10% from length shown Fieldbus Stranded TC Overall Beldfoil ( Shield Coverage) TC s Tye A 600V 105 C 2118A Beldfoil Shield Single-air 2119A 2120A Beldfoil Shield

7 Be Certain with Belden Industrial Data Solutions Industrial Data UL NEC/ C(UL) CEC Tye Pairs Ft. m Lbs. kg Nom. DCR Fieldbus Stranded TC Overall Beldfoil ( Shield Coverage) TC s 2121A s Multi-air 2122A 2123A 2124A 2125A 2126A Blue is only available in 1,000 ft. ut-u Final ut-u length may vary ±10% from length shown. Fieldbus Stranded TC Overall Beldfoil ( Shield Coverage) TC s Tye A 2127A V 105 C Beldfoil Shield Single-air s Multi-air 2128A 2129A 2130A 2131A 2132A

8 Industrial Data Solutions Industrial Data UL NEC/ C(UL) CEC Tye Pairs Ft. m Lbs. kg Nom. DCR Fieldbus Stranded TC Overall Beldfoil ( Shield Coverage) TC s 2133A 2134A 2135A Blue is only available in 1,000 ft. ut-u Final ut-u length may vary ±10% from length shown Fieldbus 22 AWG Stranded (7x30) TC Beldfoil ( Shield Coverage) TC Polyolefin Insulation Orange Sunlight-resistant PVC Jacket (Color Code: Blue, Orange) Tye B 3077F PLTC, AWG F 4.97 Aluminum 100@ Interlocked 66% Armor F Steel Interlocked Armor ITC, CM (7x30) Beldfoil CEC: FT1 Shield CPE and LSOH Jacket Otional 17.1Ω/M' 56.1Ω/km F Aluminum Interlocked Armor F Steel Interlocked Armor CPE and LSOH Jacket Otional Final ut-u length may vary ± 10% from length shown F Aluminum Interlocked Armor Polyolefin Insulation Orange Sunlight-resistant PVC Jacket (Color Code: Blue, Orange) F Steel Interlocked Armor High Seed 3078F AWG.351 CPE and 8.92 LSOH 150@ Jacket 1 Otional PLTC, CM (7x30) Beldfoil MHz CEC: CM FT Shield Ω/M' 56.1Ω/km * Although Tye A secification references nominal, Belden 1335A and 1336A meet all other Tye A requirements F Aluminum Interlocked Armor F Steel Interlocked Armor CPE and LSOH Jacket Otional 78% **600V Fieldbus Tye A Stranded TC Pairs Overall Beldfoil ( Shield Coverage) TC s Insulated Green/Yellow PVC Ground Polyolefin Insulation Orange Sunlight-resistant PVC Jacket (Color Code: Blue, Orange and Numbered) CM Pairs FT1 IEC C Number 1337A 1338A 1339A 1340A SI1341A SI1342A SI1343A SI1344A **300V LSZH Fieldbus Tye A Stranded TC Pairs Overall Beldfoil ( Shield Coverage) TC s Polyolefin Insulation Orange Sunlight-resistant PVC Jacket (Color Code: Blue, Orange and Numbered) PLTC ITC CM FT1 IEC C Pairs Number 1 S3076NH 2 S1327NH 5 S1328NH 8 S1329NH 12 S1330NH 16 S1331NH 20 S1332NH 24 S1333NH DCR = DC Resistance FHDPE = Foamed High Density Polyethylene LSZH = Low Smoke Zero Halogen TC = ** Minimum order quantity alies. 8 Belden Technical Suort BELDEN.1 ( ) Coyright 2012, Belden Inc. Fieldbus Cables PB244_INCA_BDC_1112_A_AG