Conductive Level Switch FK 2 Technical Data:
|
|
|
- Kerrie Richardson
- 2 years ago
- Views:
Transcription
1 Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by vibrations Compact and rugged design LED status indicators, red / green Conductive Level Switch FK Technical Data: Function: min / max signal by polarity change of power supply Output: DC PNP, max. ma, short-circuit proof Sensitivity:, kω, kω, kω Response time: approx. s Supply voltage:...v DC, max. ma, without switching power Electrode supply: approx. V AC Ambient temperature: C Process temperature: C Process connection: Stainless steel./. G ½ Housing: Stainless steel. Isolation: PEEK Probe: mm Ø, Tightening torque: - Nm Electrical connection: Connector Mx, -pol, IP 7 m/m/m Cable connection IP 8 (mwc) Process pressure: max. bar
2 Ordering Code Process connection and material Mx,,. (on request) G/,. (on request) G/,. Hygiene-connection others Isolation PEEK Probe Material Stainless steel. Electric Connection m Cable connection, IP 8 m Cable connection, IP 8 A Connector Mx, -poles, IP 7 H m Cable connection, IP 8 X terminal strip housing (on request) others on request Probe length (mm) Options without status LED Accessories Adapter and weld-on connectors 8- weld-on coupling Ø mm,. (L) with Viton seal 8- weld-on coupling Ø mm,. (L) with metallic hygienic seal 8- Clamp, DN...,. (L) 8- Dairy thread DN DIN 8,. (L) 8- Dairy thread DN DIN 8,. (L) 8- Dairy thread DN DIN 8,. (L) 8-8 Adapter G,. (L) Other adapter on request FK Dimensions (mm) Mx Mx.. Ø... Ø.. Mx. Cable connection IP8 SW 7 SW 7. G /" G /" Fitting Lenght L Isolation PEEK Fitting Length L Weldon Coupling Ø mm included Hygieneseal. (L) Isolation PEEK Construction Type Constuction Type for adapter or weld-on coupling Ø Ø Electric connections max-function Connector M, kohm kohm (nc) kohm : brown : white : blue : black min-function, kohm (nc) kohm kohm Cable connection : brown : yellow : white : green Technische Änderungen vorbehalten. Nöding Meßtechnik GmbH Oldenfelder Bogen D- Hamburg Germany Tel. / Fax / Internet:
3 Microwave level switch For liquids with % water content Accurate switching point without adjustments Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by vibrations Not influenced by foam or adhesions Compact and rugged design LED indicators, red / green Microwave level switch FM Technical Data: Function: min / max signal by polarity change of power supply Output: DC PNP, max. ma, short-circuit proof Response time: approx. s Supply voltage: 8... V DC, max. ma, without switching power Ambient temperature: C Fluid temperature: C Process connection: G ½, stainless steel. Case: stainless steel. Sensor tip: PEEK Clamping torque: - Nm Protection class: IP 7 Electrical connection: Quickon-connector, IP 7 Connector Mx, -pole, IP 7 Connector EN 7-8A, IP7 m / m / m cable, IP 8 (mwc) Working pressure: max. bar
4 Ordering Code Accessories Process connection and material Adapter and weld-on coupling Mx,,. (on request) 8- weld-on coupling Ø mm,. (L) with Viton G/,. seal Others 8- weld-on coupling Ø mm,. (L) Measuring tip with metallic hygienic seal PEEK 8- Clamp, DN...,. (L) 8- Dairy thread DN DIN 8,. (L) Electric connection 8- Dairy thread DN DIN 8,. (L) m Cable conection, IP 8 8- Dairy thread DN DIN 8,. (L) Connector EN 7-8A, IP Adapter G,. (L) m Cable connection, IP 8 A Connector Mx, -poles, IP 7 Other adapter on request F Quickon-connector, IP 7 H m Cable connection, IP 8 X terminal strip housing (on request) Others Options without operating functions LED FM Dimensions (mm). Mx Mx.. Quickon-Verbinder Mx Ø. Connector Mx Cable connection Connector EN 7-8A SW 7 SW 7 SW 7 SW Ø 8. G /". (.) Ø Messkopf / Tip PEEK Ø. Ø. Ø. Ø. weld-on coupling Adapter DIN 8 Clamp Adapter 8-/ Electric connections max-function : brown : blue : black M / Cable connection Quickon-Connector Connector EN 7-8A min-function : brown : blue : black modifications reserved without prior notice. Nöding Meßtechnik GmbH Oldenfelder Bogen D- Hamburg Germany Tel. / Fax / Internet:
5 Level switch for conductive liquids Process temperature - C Electrode can be shortened Rugged and maintenance free Easy montage and setup Conductive level switch FS Technical Data: Function: min / max signal by polarity of power supply Output: DC PNP, max. ma, short circuit proof Sensitivity:. kω, kω, kω Response time: approx s Supply voltage:...v DC, max. ma, without switching power Electrode voltage: ca. V AC Ambient temperature: C Process temperature: - C Process connection: G ½. (L) Isolation: PTFE Housing: POM Protection class: IP 8 (<mwc) Electrical connection: Terminal clamps Cable gland Mx, Process pressure: - bar
6 - Ordering code Process connection and material G/,. other (on request) Isolation PTFE Material Elektrode Stainless steel. Housing POM other (on request) Sensor length mm mm other (on request) Options without FS Dimensions (mm) Controler ERK.- Electrode FS Mx. V DC Sensitivity. Ø 7. Power 8. ERK.. S 7 Electrode Output. O-Ring G /" Electrical connections max-funktion Supply...V DC - min-funktion - Supply...V DC, kohm - Electrode, kohm - Electrode (nc) Supply...V DC - (nc) - Supply...V DC kohm - Electrode kohm - Electrode Supply...V DC - - Supply...V DC kohm - Electrode kohm - Electrode Technische Änderungen vorbehalten. Nöding Meßtechnik GmbH Oldenfelder Bogen D- Hamburg Germany Tel. / Fax / Internet:
7 Dry ceramic sensor Ranges from mbar to bar Accuracy.% Compact and rugged design Easy on-site configuration via DIP switches Analog output:... ma Contact output: DC PNP, max. ma Pressure switch PR Technical Data: Range:... mbar bis... bar - bar bis - bar Analog output:... ma, -Leiter Contact output: DC PNP, max. ma Accuracy: ±. % C Response time: ms Power supply:...v DC Ambient temperature: C Process temperature: -... C Temperature coefficient: ±.% FS/K (zero) ±.% FS/K (span) Long term stability: ±.% FS p. a. Process connection: G /,. (L) Housing: stainless steel. () Sensor: ceramic AL Protection class: IP 7 Electrical connection: cable gland Mx, connector Mx
8 Ranges Ordering code Range Code Overload (bar)... mbar / kpa (*) -./... mbar / kpa -./... mbar / kpa B7 -./... mbar / kpa -./... bar / kpa -/... bar / kpa -/... bar / kpa B -/... bar / kpa 7 -/... bar / kpa 8 -/... bar / kpa F -/... bar / kpa -/... bar / MPa -/... bar /. MPa -/... bar / MPa B -/... bar /. MPa -/... bar / MPa -/... bar / MPa F -/... bar / MPa -/ bar / MPa -/ bar / MPa -/ bar / MPa F -/ bar / MPa 7 -/ -... bar / - kpa D -/ -... bar / - kpa D -/ -... bar / - kpa D -/ -... bar / - kpa D7 -/ -... bar / - kpa D8 -/ -... bar / - kpa D -/ -... bar / - kpa E -/ -... bar / - kpa E -/ -... bar / - kpa E -/ (*) Accuracy % Absolutpressure on request Dimension (mm) Ø. PR Settings Output Signal... ma -wire Range Measuring range see table on the left non standard range Process connection and material G G/ DIN 8. others on request Sensor Seal FPM (Viton) Standard NBR Perbuan EPDM Kautschuk Chemraz Housing Stainless steel. E-connection Mx, A Connector Mx, -pin Optionen without nc = normally closed no = normally open Mx. Hysteresis adjustment 7... Ø. 7 O-Ring EF A BC nc no D Setpoint modification in % for example % max. Function min. Function =.% 8 =.% = % = % = % A = % = % B = % = % C = % = % D = % = 8% E = 8% 7 = % F = % G /" Electrical connections bn wh bk bu SP Modifications reserved without notice. Nöding Meßtechnik GmbH Oldenfelder Bogen D- Hamburg Germany Tel. / Fax / Internet:
9 Connection with dry and flush ceramic sensor Ranges from mbar up to bar Accuracy.% Compact and rugged design Easy on-site configuration via DIP switches Analog output:... ma, -wire Contact output: DC PNP, max. ma Pressure switch PR Technical data: Range:... mbar up to... bar -... bar up to - bar Analog output:... ma, -wire Switch output: DC PNP, max. ma Accuracy: ±. % C Response time: ms Power supply:...v DC Ambient temperature: C Process temperature: -... C Temperatur coefficient: ±.% FS/K (zero) ±.% FS/K (span) Long term stability: ±.% FS p. a. Process connection: G /,. (L) Housing: stainless steel. () Sensor: ceramic AL Protection class: IP 7 Electrical connection: cable gland Mx, connector Mx
10 Ranges Ordering code Range Code Overload (bar)... mbar / kpa (*) B7 -./... mbar / kpa -./... bar / kpa -./... bar / kpa -./... bar / kpa B -./... bar / kpa 7 -.8/... bar / kpa 8 -.8/... bar / kpa F -.8/... bar / kpa -/... bar / MPa -/... bar /. MPa -/... bar / MPa B -/... bar /. MPa -/... bar /. MPa (**) -/ -... bar / - kpa D -/ -... bar / - kpa E -/ -... bar / - kpa E -/ -... bar / - kpa E -/ -... bar / - kpa E7 -/ (*) Accuracy % Absolutpressure on request (**) in preparation PR Output Signal... ma -wire Range Measuring range see table on the left non-standard range Process connection and material G G/ DIN 8. S G/ DIN 8. others (on request) Sensor Seal FPM (Viton) Standard NBR (Nitril) EPDM Kautschuk Chemraz others (on request) Housing Stainless steel. E-connection Mx, A Connector Mx, -PIN Options without Dimension (mm) Type S Ø. Mx, Type G Ø. Mx, O-Ring. 7. Ø. Ø. G /" Ø.8. O-Ring Ø. G /" Settings Electrical connections nc = normally closed no = normally open EF nc no A BC D Setpoint modification in % for example % Hysteresis adjustment max. Function min. Function =.% 8 =.% = % = % = % A = % = % B = % = % C = % = % D = % = 8% E = 8% 7 = % F = % bn wh bk bu SP Modificatons reserved without notice. Nöding Meßtechnik GmbH Oldenfelder Bogen D- Hamburg Germany Tel. / Fax / Internet:
Digital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
Relative and absolute pressure switch type 529
Relative and absolute pressure switch type 529 Pressure range -1... 0 60 bar The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20
Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
capacitive sensors 241
capacitive sensors Highlights: ü Synthetic or metal housings ü 4- or 2-wire devices ü Adjustable operating distances ü For the detection of all kinds of materials www.contrinex.com 241 capacitive Sensors
Miniature pressure transmitter Model M-10, standard version Model M-11, version with flush diaphragm
Electronic pressure measurement Miniature pressure transmitter Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further Approvals see page 3 MicroTronic
Pressure transmitter (2 wire) / switch for continuous or On/Off Control
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
www.suco.de Electronic Pressure Monitoring New Products
Electronic Pressure Monitoring New Products RoHS compliant Electronic Pressure Switches SoS-Technology with one or two switching functions Electronic Pressure Switches CE marking SUCO Electronic pressure
2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
Level Switch LBFS. Technical Data. ATEX data Internal inductivity Li < 10 μh Internal capacity Ci < 43 nf Barrier data. Sensor
Special Features Wetted parts in stainless steel and PEEK Compact design Precise switching point with no requirement for calibration Process temperature 0... 5 C Measures media with DKvalues >.5 (DK =
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Capacitive Proximity Sensors
Capacitive Proximity Sensors Capacitive proximity sensors High level of temperature stability Enhanced sensing ranges for functional reserve High level of immunity against: - Electrostatic discharge, e.g.
Electronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
Electronic Pressure Switch EDS 3000
For Your Information Electronic Pressure Switch EDS 3000 User Manual Revision: November 01, 2002 1. EDS 3000 Functions The EDS 3000 unit offers the following functions: Display pressure in psi, MPa, or
LMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mh O up to 0... 50 mh O Output signals -wire: 4... 0 ma -wire: 0...
Level Capacitive. Applications. Characteristics. Capacity measurement with high frequency
GHM Messtechnik GmbH Sales Center International Schloßstraße 6 88453 Erolzheim Germany Fon +49-7354-937233-0 Fax -88 www.ghm-messtechnik.de info@ghm-messtechnik.de Level Capacitive Characteristics System
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Operating Instructions for Pressure Sensors Heavy Duty Compact. Model: SEN-86../ SEN-87..
Operating Instructions for Pressure Sensors Heavy Duty Compact Model: SEN-86../ SEN-87.. 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...3 5. Operating Principle...4
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
Product Catalogue. AP Automatyka +48 67 357 10 80 biuro@apautomatyka.pl www.apautomatyka.pl ISO 16949 ISO 14001 OHSAS 18001 ISO 9001.
Product Catalogue ISO 16949 ISO 14001 OHSAS 18001 ISO 9001 Marine Division Since 1945 your qualified partner 1945 Huba Control AG founded 1974 Taken over by Stäfa Control System AG 1990 Concentration
Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version
Electronic pressure measurement Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version WIKA data sheet PE 81.66 Applications Machine building
Temperature sensor with integrated transmitter for industrial applications, MBT 3560
Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment
Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
Differential pressure sensors
1 923 1923P01 Differential pressure sensors for neutral or slightly aggressive gases and liquids QBE61.3-DP.. Operating voltage AC 24 V or DC 18...33 V Output signal DC 0...10 V Connecting male thread
ELECTROMAGNETIC FLOWMETER COMPACT
R ELECTROMAGNETIC FLOWMETER COMPACT For conductivit Liquids MIK frequency-, switching-, analog otput digital plug on display Range from liquids, acids and caustic solutions:0.01-0.5...35-7000l/min Accuracy:
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
Photoelectrics Through-beam Type PH18CNT..., DC
Photoelectrics Through-beam Type PH8CNT..., DC Miniature sensor range Range: 20 m Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: 0 to 0 VDC Output: 00 ma, NPN
Pressure Sensors. for neutral and slightly aggressive liquids and gases
1909P01 Pressure Sensors for neutral and slightly aggressive liquids and gases QBE2003-P QBE2103-P High-precision measuring Measuring range 0 to 60 bar relative Supply voltage AC 24 V / DC 12...33 V or
Data Sheet PS1B Pressure Switch
Data Sheet PS1B Pressure Switch Main Features Pressure Ranges 0 to 6 up to 0 to 600 bar (gage) Electrical Connection G 1/4 A DIN 3852-E or -A Pressure Connection Output Signal M12-4 Pin 4-20 ma, Programmable
OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
Instruction Manual Differential Pressure Transmitter
DE28 Instruction Manual Differential Pressure Transmitter Table of Contents 1. Safety Instructions 2. Intended Applications 3. Product Description and Functions 4. Installation 5. Commissioning 6. Maintenance
Pressure sensors for refrigerants
1 905 1905P02 Pressure sensors for refrigerants QBE621-PU Pressure sensor for the measurement of positive positive and negative pressure in HVAC applications with low temperature liquids or gases Piezo-resistive
Dimensional drawing. Connection type IME08-1B5NOZT0S IME08-1B5NSZT0S IME08-1B5POZT0S IME08-1B5PSZT0S. 3 x 0.14 mm². brn. L+ Schließer/ Öffner M.
Inductive sensor, IE series, IE08, DC-wire, Standard series, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine
Technical data machine connector M12 1, 4-pole according to IEC ; FIXCON-capable
Data Sheet 902815 Page 1/7 JUMO Dtrans T100 Screw-in RTD temperature probe with/without transmitter for temperatures from -50 to +260 C EHEDG certification complies with ROHS for EU and China configuration
Digital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
Datalogger DL/N 70 Version: 28.03.2012
Datalogger DL/N 70 Version: 28.03.2012 Technical Specifications Pressure measuring range (mh20) 1... 5 > 5... 20 > 20... 250 Overpressure 3 bar 3 x FS ( 3 bar) 3 x FS Burst pressure > 200 bar > 200 bar
Features. Picture. Specifications
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Two wire system Piezoresistive measuring element Output signal 4-20 ma Conformity error ±0.5 % FS or Standard DIN measuring
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Magnetic field sensor magnet-inductive proximity sensor BIM-M12E-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M12 x 1 Chrome-plated brass Rated operating distance 90 mm with DMR31-15-5 magnet DC 2-wire, nom.
Fast, reliable, ultra-precise. My-Com precision switches.
Fast, reliable, ultra-precise.. Unrivaled 1 μm repeat accuracy Setting reference points, monitoring tolerances, controlling, adjusting. Fast, reliable, ultra-precise. Uncompromising accuracy tried and
Technical Data. General specifications Switching element function Rated operating distance s n 2 mm. Short-circuit protection
0102 Model Number Features 2 mm flush Usable up to SIL 2 acc. to IEC 61508 Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 2 mm Installation flush Output
Digital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8026 can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor output(s)
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
Measurement range. Protection class. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % (15...
Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 Measurement range 0-360 Protection class IP60 Analog output Non-contact with external position magnet Wear free Compact, low profile housing
Measurement range. Protection class. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % (15...
Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 Measurement range 0-360 Protection class IP60 Analog output Non-contact with external position magnet Wear free Compact, low profile housing
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Monitor for Measurement of Speed and Detection of Direction Series D224.xxS2
D Monitor for Measurement of Speed and Detection of Series D.xxS KEY FEATURES Speed and Monitor with sensor monitoring and self-test function Frequency range 0 Hz 00 khz Analog Output 0/ 0 ma Bright red
Pressure sensing and control
Pressure sensing and control A comprehensive range of Pressure Switches, providing a range of different options for converting pressure changes into an electrical signal. The range includes electromechanical
Supplementary instructions. Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family. Document ID: 34107
Supplementary instructions Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family Document ID: 4107 Contents Contents 1 For your safety 1.1 Appropriate use...
Flowmeter for Gases and Installation in Existing Pipes
Flowmeter for Gases and Installation in Existing Pipes Type can be combined with... Depth scale for accurate installation Usable in pipes from 1/2 " up to 12" (DN300) Easy installation under pressure Analogue
Liquid Level Limit Switch liquiphant T FTL 20
Technical Information TI 64F/4/ae Liquid Level Limit Switch liquiphant T FTL 0 Level limit switch for liquids Applications The Liquiphant T FTL 0 is a level limit switch for virtually any kind of fluid
Linear encoders without bearings incremental System for linear motion feedback
Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system
psens Pressure Measurement
Mobile Machine Control Solutions psens Pressure Measurement Reliable Compact Versatile Unique Measurement Accuracy psens. Pressure Sensors from Hirschmann MCS Hirschmann pressure transducers are an ideal
RTD Temperature Probe for the Food/Pharmaceutical Industry
sales@jumo.co.uk Data Sheet 902810 Page 1/9 RTD Temperature Probe for the Food/Pharmaceutical Industry For temperatures between -50 and +250 C Protection type up to IP69 according to DIN EN 60529 (IP69K
Magnetic field sensor magnet-inductive proximity sensor BIM-EG08-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4301 Rated operating distance 78 mm with DMR31-15-5 magnet DC 2-wire, nom.
Relative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range -1... 9 bar / 0... 2.5 1000 bar The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the
REGTRONIC OPERATING INSTRUCTIONS
REGTRONIC OPERATING INSTRUCTIONS 1.FEATURES Electrical connection: M12 8-pin connector Preset pressure range 0.05-10 bar with possible full scale regulation. 10 100 mbar adjustable deadband Supply pressure:
Magnetic Linear Encoder Systems BML.... non-contacting and high-resolution
BML... non-contacting and high-resolution General data Magnetic BML... non-contacting and high-resolution The high-precision incremental BML Magnetic System consists of a sensing head and a magnetically
Capacitive sensors. Electrosensitive bloodhounds. KD/KL 06 from Page 666. KD/KL 08 from Page 668. KD/KL 12 from Page 670 TYPICAL SENSOPART
Capacitive sensors Electrosensitive bloodhounds KD/KL 06 from Page 666 Smallest design (ø 6.5 mm) with robust stainless steel housings Switching distance 0..5 mm (flush) or 0. 3 mm (non-flush) Suitable
Online data sheet PET-1CB010N10SVMC PET PRESSURE SENSORS
Online data sheet PET-1CB010N10SVMC PET B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Pressure type Measuring range Ordering information Other models and
18 mm Diameter DC 4 Wire
18 mm Diameter DC 4 Wire Capacitive Short circuit & reverse polarity protection Improved EMC and ESD Shielding Protection degree IP65 NPN, NO+NC S5000 S5022 S5010 S5032 PNP, NO+NC S5001 S5023 S5011 S5033
B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment
![B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment](/thumbs/30/14685882.jpg "B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment")
B MOTORPORT COMPONENT B TEMPERATURE ENOR Purpose and unction Temperature sensors used in modern engine management systems are of NTC [negative temperature co-efficient] design. imply as temperature rises
Mechanical Pressure Pressure Switches Switches
Mechanical Pressure Switches Mechanical Pressure Pressure Switches Switches Pressure Switches with integrated connectors NO/NC/Changeover IP 67 (up to IP6K9K) by plug and control connectors Various connector
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
Proximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30
Proximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30 Euronorm thermoplastic polyester housing, cylindrical Diameter: M 12, M 18, M 30. Sensing distance: 2 to 15 mm
Table of Contents, Magnetic Field Sensors. Introduction to Magnetic Field Sensors... 380
Proximity Switches Table of Contents, Magnetic Field Sensors Proximity Sensors.3 Magnetic Field Sensors.2.3 Introduction to Magnetic Field Sensors... 380 Operating Distance and Responsiveness Mounting
Process Automation. Sensors and Systems: Level Sensors Level Switches Overfill Prevention Pressure Sensors Temperature Sensors
Process Automation Process Automation Accurate Level Sensors Level Switches Overfill Prevention Pressure Sensors Temperature Sensors Flexible Sensors and Systems: www.fafnir.com Reliable TEMPERIX S TEMPERIX
Measurement range. Protection class. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % (15...
Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 Measurement range 0-360 Protection class IP60 Analog output Non-contact with external position magnet Wear free Compact, low profile housing
Temperature Switch Thermophant T TTR 31, TTR 35
Technical Information Temperature Switch Thermophant T TTR 3, TTR 35 Temperature switch for the safe measurement, monitoring and control of process temperatures Application Temperature switch for the monitoring,
Electrical connection technologies Electrical connectors Electrical connectors with cable, series. Brochure
Electrical connection technologies Electrical connectors Electrical connectors with cable, series CN Brochure Electrical connection technologies Electrical connectors Electrical connectors with cable,
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Electronic Pressure Switches
Electronic Pressure Switches Electronic Pressure Switches c Pressure - Electronic Pressure Switches - Mechanical Pressure Switches - Pressure Transducer c Valves & Regulators c Temperature c Level c Flow
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
SE 655(X) / SE 656(X) Toroidal Conductivity Sensors
User Manual English SE 655(X) / SE 656(X) Toroidal Conductivity Sensors Latest Product Information: www.knick.de Description 3 The SE 655(X) and SE 656(X) toroidal conductivity sensors are particularly
Ferrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
Operating instructions Mechatronic flow sensor. SBY33x 704465/06 03/2011
Operating instructions Mechatronic flow sensor SBY33x 7065/06 03/2011 Contents 1 Safety instructions...2 2 Functions and features...3 3 Installation...3 Electrical connection... 5 Switch point setting...
Differential Pressure Sensors
1 920 1920P01 Differential Pressure Sensors for neutral and mildly corrosive liquids and gases QBE63-DP... Differential pressure sensor, suitable for gases and liquids, for the measurement of positive
Electrical connection technologies Round plug connector Round plug connectors with cable, series CN2. Brochure
Round plug connectors with cable, series CN Brochure Round plug connectors with cable, series CN M8 / open cable ends Socket, M8, -pin, straight open cable ends, -pin 6 Socket, M8x, -pin, straight open
RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER
Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
ALSEN TK 9 Edition 4.11
ALSEN TK 9 Edition 4.11 Klaschka Klaschka Industrieelektronik GmbH & Co. GmbH KG Steinegger Am Zeller Pfad Straße 1 19 75233 75242 Tiefenbronn Neuhausen / Enzkreis GERMANY Germany Fon +49 7234 79-0 - 0
product family CFAM 12 CFAM 18 CFBM 20 CFAM 30 CFAK 12 CFAK 18 CFAK 30
Capacitive Sensors Overview cylindrical designs product family CFAM 12 CFAM 18 CFBM 20 CFAM 30 CFAK 12 CFAK 18 CFAK 30 shielded n n n n n n n Overview 4 mm 8 mm 10 mm 15 mm 4 mm 8 mm 15 mm housing length
CAPACITIVE LEVEL METERS CLM 36
CAPACITIVE LEVEL METERS CLM 36 For continuous level measurement of liquid and bulk-solid materials Direct mounting into containers, silos, vessels, basins, reservoirs, etc Easy and quick connecting by
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
Technical Data. Dimensions
0102 Model Number Features 15 mm quasi flush Usable up to SIL2 acc. to IEC 61508 Accessories BF 30 Mounting flange, 30 mm V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable V1-W-N-2M-PUR Female
Hall-Effect contactless linear position sensors
Proud to be part of the team Hall-Effect contactless linear position sensors Performance features Measurement range up to 60mm (2.4 ) 56 different stroke lengths High reliability contactless technology
Datasheet DE44. 09005234 DB_EN_DE44_LCD Rev. ST4-A 07/16. Digital 2-channel differential pressure switch/transmitter with colour-change LCD *09005234*
09005234 DB_EN_DE44_LCD Rev. ST4-A 07/16 *09005234* Datasheet DE44 Digital 2-channel differential pressure switch/transmitter with colour-change LCD 1 Product and functional description FISCHER Mess- und
Relative, and differential pressure transmitter type 699
Relative, and differential pressure transmitter type 699 Pressure range -1... 1 mbar / 0... 0.3 50 mbar The type 699 transmitters are available in switchable pressure ranges and with or without display.
capacitive sensors new:
capacitive sensors Highlights: ü Detection of virtually all target materials ü Easy adjustment with potentiometer and LED ü Detection through non-metallic pipes and containers ü Sensors for use in harsh
PMP 4000 Series. Druck Amplified Output Pressure Transducers. GE Sensing. Applications. Features
Features Applications The PMP 4000 Series provides a complete range of high level voltage output pressure transducers offering advanced levels of measurement accuracy, stability and flexibility from a
Technical Data. Dimensions
0102 Model Number Features Comfort series 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories BF 18 Mounting flange, 18 mm EXG-18 Quick mounting bracket with dead stop Technical Data specifications
Contactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
Inline Paddle Wheel Flowmeter, ELEMENT design
Inline Paddle Wheel Flowmeter, design Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single or dual 4...20 ma analog
Material: Weight: Starting Torque: Mass Moment of Inertia: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity:
Automation / Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
Typical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.