DIGI-MET ELECTRONIC INDICATORS

Transcription

1 DIGI-MET ELECTRONIC INDICATORS Featuring Direct RS232C Output And Swiss SYLVAC Electronics. A sophisticated non-contact linear measuring system... can be connected to any computer or printer with no interface necessary. Featuring (0,001mm) Resolution with ±.0001 Accuracy; Repeatability: 0,002mm/.0001 ±2s. FEATURES: AGD Group 2, 8mm stem with 3 /8 bushing adaptor. Rugged Polyamid housing. Stainless shank and spindle. Tracking Speed: 60 /second. Display rotates 270. Top lifting knob. Measuring force: N. Low Drain Lithium Battery: 4500 continuous on time or 2-3 years with on/off switch. EXTRA-LARGE DIGITAL DISPLAY FOR EASY READING! FUNCTIONS: Direct inch/metric conversion. Zero-setting at every point. HOLD - function. PRESET - function with dual measuring references to ± Incremental floating zero. If tool is used for SPC, the zero button can automatically be configured as a data I/O switch. FREE RS232C Opto Electronic Output. INCLUDES CERTIFICATE OF CALIBRATION TRACEABLE TO N.I.S.T. Four Measuring Ranges Available: Up to 4 (100mm) No. Description DIGI-MET Electronic Indicator with 0-1 (0-25mm range) DIGI-MET Electronic Indicator with 0-1/2 (0-12.5mm range) DIGI-MET Electronic Indicator with 0-2 (0-50mm range) DIGI-MET Electronic Indicator with 0-4 (0-100mm range) Accessories Lugback attachment for DIGI-MET Indicators Lifting lever for models & Replacement Lithium Battery, 3V Direct RS232C Opto-Electric Output Cable for all DIGI-MET direct output gaging: includes 80 connecting cable with 9 pin IBM RS232 connector DIGI-MET MULTI-MODE ELECTRONIC INDICATORS Preisser introduces the next generation of Digi-Met Indicators: NEW DIGI-MET MULTI-MODE TOLERANCE SIGNAL LIGHTS FEATURES: MIN/MAX/TIR Modes Tolerance Signal Lights Selectable Resolution Bidirectional RS-232 Output Preset Recall FREE INCLUDES CERTIFICATE OF CALIBRATION TRACEABLE TO N.I.S.T (.001mm) resolution AGD Group 2 specifications, 8mm stem with 3/8 bushing adaptor Display face rotates 270 for easy viewing Two presets with preset recall Floating zero Accuracy ±2s (.002mm±2s) Repeatability.0002 (.005mm) No , DIGI-MET Multi-Mode Indicator with 0-1 (25mm) range No , DIGI-MET Multi-Mode Indicator with 0-½ (12.5mm) range Accessories: Please refer to above

2 FLEXBAR DIGITAL ELECTRONIC INDICATOR New Improved Featuring Extra Large Display A Quality General Purpose Indicator At An Affordable Price. 0-1 /0-25mm Range Inch/Metric Conversion.0005 /.01mm Resolution Zero Setting REL/ABS Conversion Extra Large Character Height (12.7mm) Battery: 1 Silver Oxide SR44, 1.5v On/Off Button 3/8 Diameter Stem Flat Back RS-232 Interface (Data Output) Includes Fitted Wooden Case No , 0-1 /25mm Electronic Indicator No , Replacement Battery FLEXBAR ELECTRONIC DIGITAL DEPTH GAGE SET Includes No Digital Indicator (see above) Measuring range 0-10 Graduations:.0005 /.01mm Available with 2½ or 4 wide base Uniform pressure over full range of travel Complete with 6 extension rods in fitted case Provides convenient and rapid measurement of bore depths. No , Flexbar Electronic Digital Depth Gage Set with 2½ wide base No , Flexbar Electronic Digital Depth Gage Set with 4 wide base Millitast Electronic Digital Indicator A Basic Function Digital Indicator Including Preset at an Economical Price Featuring: Opto RS232C or Digimatic Data Output Includes One Preset On/Off Zero Setting mm/inch Flat Back High Contrast 8.5mm Liquid Crystal Display 8mm Stem with 3/8 Bushing IP51 Protection Measuring Range: mm/+.5in. Resolution: 0.01mm/.0005in. Accuracy:.05mm/.0002in. Measuring Force (N): No , Millitest Electronic Digital Indicator. FLEXBAR MICRO-MAXUM Digital Electronic Indicator A FULL FUNCTION, RUGGED YET ECONOMICAL ELECTRONIC INDICATOR SUITABLE FOR HIGH PRODUCTION MEASUREMENTS. MAIN FEATURES INCLUDE: Highly visible - easy reading display with high resolution and analog bar graph. Shows deviation from zero or a preset value. Lightweight, rugged gasketed case, crystal and stem resists fluid contamination. Auto power down for low battery consumption and long life "/0.001mm resolution. Inch/Metric selectable. Normal/Reverse Sensing. Preset capabilities. Calibratable. SPC Data Output - 2 Formats. No. Resolution Stem Diameter Stem Length /0.001mm /0.001mm /0.001mm 8mm 11.7mm Replacement Lithium Battery (2 required) Mating Connector for data output Flat Back Post Back Screw Back RANGE AND RESOLUTION: Range Resolution Accuracy (% of Digital Range) Spindle /+.060 (-1.28/+1.5mm) Display Inch ± ±1.0% over ±.040 ±0.5% over ±.020 Metric ±1.0mm 0.001mm ±1.0% over ±1.00mm ±0.5% over ±0.50mm Repeatability ± 1 digit. Gaging Force 3-4 oz./ g (at center of spindle travel). Power 3 volt lithium coin cell (2 per unit, consumer type, CR 2450) Battery Life Six months normal usage or 2000 hours. Weight Approx. 6 oz./170g

3 waterproof/shockproof dial indicators IP67 Protection Class-Hermetically Sealed Against Oil, Water, Mist and Dust Features: A flexible rubber bellows is fitted where the spindle enters the stem. The upper end of the measuring spindle is sealed by a safety cap and and O ring. A new design of the metal bezel and its assembly produces a perfect seal. Its special features include O rings, flat glasses and a screwed-on brass ring. Additional Waterproof/Shockproof models available upon request. Accessories: No , Lugback for AGD-1 s No , Flatback for AGD-2 s Metric Dial Gauge M 2 SW waterproof, shockproof Reading 0,01 mm Range 10 mm Range per revolution 1 mm Bezel-Ø 61,5 mm Stem-Ø 8 h 6 Dimensions and accuracy according NEW to DIN 878 Spindle LOWER PRICES! Lapped Dimensioned drawing Supplied on request FLEXBAR-COMPAC DIAL INDICATORS Important Features: Shockproof system - protects movement Stainless, hardened and ground steel rack Dull chrome plated case Stem diameter: 8mm stainless (hardened and ground) with 3/8 bushing adaptor Shown: No Made in Germany An additional O ring is placed between the rotating outer ring and the indicator s metal housing. The back plate is fitted in such a way that no foreign matter can enter. Effective shockproof system. 360 Rotatable bezel. Available in Inch & Metric s: No Inch Dial Gauge Z3 SNW waterproof, shockproof Reading.0005 Range.400 Range per revolution.050 Bezel-Ø 2 27/64 Stem-Ø 3/8 Dimensions and accuracy according to ANSI Spindle Lapped Dimensioned drawing Supplied on request No Highest Quality - Swiss Made Rotating dial, clockwise reading with bezel lock Revolution counter on all models Adjustable tolerance indicators Interchangeable contact points with M2,5 threading. (Metric/Inch conversion point available, see page 106.) AVAILABLE IN AGD-1 AND AGD-2 MODELS IN BOTH INCH AND METRIC. SPLASHPROOF MODELS AVAILABLE AS INDICATED (*) AGD-1 MODELS FLEXBAR COMPAC MEAS. RANGE READING GRADUATION NO. NO. RANGE PER REV AB * AE AB * B 355AE 5mm.120 0,5mm ,01mm.0001 AGD-2 MODELS: AB AB * AE *Splashproof models No , Lugback for AGD-2 s

4 Black Face PREMIUM QUALITY PRECISION DIAL INDICATORS - AGD 2 Made in Japan Features Extremely Smooth Precision Gears INCH AND METRIC MODELS OTHER FEATURES: Contact point made of tool steel, hardened ground and chrome plated. Stem made of stainless steel with a high strength is malfunction-free due to fastening. Micro-fine graduation for easy reading. Adjustable bezel for convenient zero setting with clamp screw continuous dial B Tolerance pointers standard Satin chrome finish AGD 2 style with central lug back. AGD GROUP 2 No. Range Reading Graduation B mm ,001mm mm ,01mm No , Lifting Lever for AGD 2 Indicators No , Flat Back for AGD Group 2 Indicators PRECISION DIAL INDICATORS - AGD1 SAME FEATURES AS AGD INDICATORS ABOVE PREMIUM QUALITY-Made in Japan MODEL NO RANGE mm READING No , Flat Back for AGD Group 1 Indicators GRADUATION mm REVOLUTION COUNTER - - YES

5 FLEXBAR PRECISION DIAL INDICATORS- AGD2 Each Face Has Dual Scale Continuous & Balanced. Inch and Metric s Available. SPECIFICATIONS AND QUALITY FEATURES: Tolerance pointers standard Bearings made from special brass. Bezel clamp standard. Lug Back is integral with case. Constant measuring pressure return spring lever. Hardened and lapped pinions. NOW AVAILABLE IN Stainless steel hardened stem. 2" TRAVEL MODELS Superfinished stainless steel rack spindle. Revolution counter on face. Rotatable Bezel with positive clamp for zero setting. Unbreakable crystal. All parts interchangeable. Totally enclosed case protects movement from dust and oil. Meets or Exceeds AGD Specifications No. Graduations Range Dual Scale Dia. Stem Mounting /8 Central Lug ¼ dia. Hole /8 Central Lug ¼ dia. Hole /8 Central Lug ¼ dia. Hole mm 20mm mm Central Lug ¼ dia. Hole /8 Central Lug ¼ dia. Hole DIAL comparator gages Available in a Choice of Ranges/Resolutions Featuring: Large, easy-to-read dial. Constant measuring force. Self-contained, shockproof movement. Box design housing. Made in Germany Jeweled bearings, precision ground gears and pinions. 8mm stem diameter includes 9.5mm/.375in bushing for mounting to US Standards. Measuring Range Resolution/Min. Graduation Overtravel Measuring Force Accuracy Millimess Series: ±50µm 1µm 2.8mm 1N ±1µm ±.0020in in 1N ±.00005in Zentimess Series: ±25µm 0.01mm 2.5mm 1N ±7µm ±.0100in.0005in.10in 1N ± in Compramess Series: ±0.13µm 5µm 2.5mm 1N(100p) ±3.5µm ±.0050in.0001in.10in 1N(100p) ±.00001in

6 INDIVIDUAL DIAL INDICATOR POINTS The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch AGD 4-48 threads. Our Metric-to-English Conversion Point. No (see bottom of page) allows the use of any of the below points to be used with metric (M2.5 x 0.45 thread) indicators. TYPE LENGTH INCH ORDER NO. FLAT FLAT FLAT FLAT FLAT FLAT FLAT FLAT FLAT BALL BALL BALL BALL BALL INDICATOR POINT KITS Contains a selection of contact points in styles of half round, flat, bent, soft, long stem, taper and ball type, in all popular lengths. A.G.D. Specification 4-48 thread. Set No , 22 pc Indicator Point Kit Set No , 11 pc Indicator Point Kit SPECIAL INDICATOR CONTACTS DESCRIPTION MODEL NO. Radius Contact Chisel Point Contact Offset Chisel Point Contact /8 Dia. Steel /8 Dia. Carbide ¼ Dia. Steel /16 Dia. Cone Point /16 Needle Stud Contact Roller Anvil Contact 3/8 Roller Hardened Steel - Black Oxide Finish TYPE LENGTH INCH ORDER NO. CONICAL CONICAL CONICAL CONICAL STEM (Bent) STEM (Measuring Tip-.120 Length) STEM (Measuring Tip-.250 Length) STEM TAPERED CONTACTS Hardened Steel with Black Oxide Plating. A.G.D threads. No. Length /32" " /2" " INDICATOR POINT EXTENSIONS Hardened Steel with Black Oxide Plating. A.G.D Thread. No. Length No. Length ½ ¾ ¾ ¼ ½ No

7 Has 4-48 Thread FLEXBAR INDICATOR PIN VISE ACCESSORY Allows any A.G.D. dial indicator to hold any diameter probe, needle, etc. 0 to.040" capacity. Uses standard 4-48 thread for easy mounting to indicator spindle. No Pin Vise Accessory for Dial Indicators CARBIDE AND RUBY BALL PRECISION INDICATOR CONTACT TIPS Precision contact tips manufactured for use on standard drop style dial indicators. Available with Grade 25 Tungsten Carbide, or Grade 25 Ruby tips. Both Tungsten Carbide and Ruby have extremely hard and smooth measuring surfaces. Fits all AGD standard Groups 1, 2, 3, 4 indicators. Tungsten Carbide Tips - Extremely smooth and hard, perfect for use in any repetitive measuring application. Will last much longer than standard steel tips. Ruby Tips - Ruby tips have the following desirable properties that make it the material of choice for all measuring applications: Hardness, resistance to wear, chemical and thermal stability, extremely low friction coefficient, negligible thermal expansion. Carbide Tips Ruby Tips Tip Length Size Material Threads No. Tip Length Size Material Threads No. ¼ 3mm Carbide ¼ 3mm Ruby ¼ 3mm Carbide M ¼ 3mm Ruby M ½ 3mm Carbide ½ 3mm Ruby ¾ 3mm Carbide ¾ 3mm Ruby ¼ 4mm Carbide ¼ 4mm Ruby ¼ 4mm Carbide M ¼ 4mm Ruby M ½ 4mm Carbide ½ 4mm Ruby ¾ 4mm Carbide ¾ 4mm Ruby FLAT & BUTTON TYPE INDICATOR CONTACTS Standard contact points for all AGD standard Dial Indicators with 4-48 threads. All Contacts are Low Carbon Steel, Case Hard, and Black Oxide Plated. Flat Contacts Button Contacts No. Width Thickness No. Width Thickness ¼ / / ½ ½ ¾ ½ / ¾ ½ Contact has ground face

8 14909 Mini Digital Indicators Features for Mini Digital Indicator: Zero Setting mm/inch selection Absolute/relative mode Preset value recall Data transmission Selection of measuring direction 4.25 Overall Length 8mm Mounting Stem Rear Dovetail offers additional fixing options Range: 12,5mm/.5 Features for Mini Test Indicator:.8mm Range 2.9 Overall Length Features for Both Mini Digital Indicator & Test Indicator Digital Display LCD, height of digits: 6mm Output: RS 232, with external power supply FLEXBAR V-ANGLE DIAL DEPTH GAGE BASE Features 120 Prismatic Base No. Description Resolution Mini Digital Indicator.0005 /.001mm Mini Digital Indicator- Water Resistant.0005 /.01mm Mini Digital Test Indicator- Lever Style.0005 /.01mm Data Output Cable Replacement Lithium Battery, 3V Ideal for checking cylindrical parts ranging from 10mm/.394" to 100mm/3.94". This "Keyway" base will accept any dial or digital gage with a.375 stem, or 8mm stem using supplied reducer bushing. Above: Flexbar Depth Gage Base ( No ) in use with No ,.0001" reading dial indicator (not included). FEATURES: Made of tempered stainless steel with ground base. Other surfaces are rust-proof treated. Thickness:.630". No , Flexbar V-Angle Depth Gage Base only ADDITIONAL DIAL INDICATOR DEPTH GAGE BASES Precision ground and hardened Depth Base accepts any standard AGD Dial Indicator with 3 /8" stem. Manufactured from hardened Steel, ground for flatness, and Black Ox plated. TWO MODELS AVAILABLE: No , 2 1 /2" Long Base No , 4" Long Base

9 Has 4-48 Thread FLEXBAR INDICATOR PIN VISE ACCESSORY Allows any A.G.D. dial indicator to hold any diameter probe, needle, etc. 0 to.040" capacity. Uses standard 4-48 thread for easy mounting to indicator spindle. No Pin Vise Accessory for Dial Indicators CARBIDE AND RUBY BALL PRECISION INDICATOR CONTACT TIPS Precision contact tips manufactured for use on standard drop style dial indicators. Available with Grade 25 Tungsten Carbide, or Grade 25 Ruby tips. Both Tungsten Carbide and Ruby have extremely hard and smooth measuring surfaces. Fits all AGD standard Groups 1, 2, 3, 4 indicators. Tungsten Carbide Tips - Extremely smooth and hard, perfect for use in any repetitive measuring application. Will last much longer than standard steel tips. Ruby Tips - Ruby tips have the following desirable properties that make it the material of choice for all measuring applications: Hardness, resistance to wear, chemical and thermal stability, extremely low friction coefficient, negligible thermal expansion. Carbide Tips Ruby Tips Tip Length Size Material Threads No. Tip Length Size Material Threads No. ¼ 3mm Carbide ¼ 3mm Ruby ¼ 3mm Carbide M ¼ 3mm Ruby M ½ 3mm Carbide ½ 3mm Ruby ¾ 3mm Carbide ¾ 3mm Ruby ¼ 4mm Carbide ¼ 4mm Ruby ¼ 4mm Carbide M ¼ 4mm Ruby M ½ 4mm Carbide ½ 4mm Ruby ¾ 4mm Carbide ¾ 4mm Ruby FLAT & BUTTON TYPE INDICATOR CONTACTS Standard contact points for all AGD standard Dial Indicators with 4-48 threads. All Contacts are Low Carbon Steel, Case Hard, and Black Oxide Plated. Flat Contacts Button Contacts No. Width Thickness No. Width Thickness ¼ / / ½ ½ ¾ ½ / ¾ ½ Contact has ground face

10 14909 Mini Digital Indicators Features for Mini Digital Indicator: Zero Setting mm/inch selection Absolute/relative mode Preset value recall Data transmission Selection of measuring direction 4.25 Overall Length 8mm Mounting Stem Rear Dovetail offers additional fixing options Range: 12,5mm/.5 Features for Mini Test Indicator:.8mm Range 2.9 Overall Length Features for Both Mini Digital Indicator & Test Indicator Digital Display LCD, height of digits: 6mm Output: RS 232, with external power supply FLEXBAR V-ANGLE DIAL DEPTH GAGE BASE Features 120 Prismatic Base No. Description Resolution Mini Digital Indicator.0005 /.001mm Mini Digital Indicator- Water Resistant.0005 /.01mm Mini Digital Test Indicator- Lever Style.0005 /.01mm Data Output Cable Replacement Lithium Battery, 3V Ideal for checking cylindrical parts ranging from 10mm/.394" to 100mm/3.94". This "Keyway" base will accept any dial or digital gage with a.375 stem, or 8mm stem using supplied reducer bushing. Above: Flexbar Depth Gage Base ( No ) in use with No ,.0001" reading dial indicator (not included). FEATURES: Made of tempered stainless steel with ground base. Other surfaces are rust-proof treated. Thickness:.630". No , Flexbar V-Angle Depth Gage Base only ADDITIONAL DIAL INDICATOR DEPTH GAGE BASES Precision ground and hardened Depth Base accepts any standard AGD Dial Indicator with 3 /8" stem. Manufactured from hardened Steel, ground for flatness, and Black Ox plated. TWO MODELS AVAILABLE: No , 2 1 /2" Long Base No , 4" Long Base