Mahrlights. only j 199,-- As starter set with wireless receiver and software. MarCal. Digital Caliper 16 EWRi with integrated wireless interface

Transcription

1 - + Mahrlights promotion s valid until 31 December 2014 MarCal. Digital Caliper 16 EWRi with integrated wireless interface As starter set with wireless receiver and software only j 199,--

2 - 2 MarCal. Digital Caliper 16 EWRi with Integrated Wireless data transmission, Protection Class IP67 Integrated Wireless - Wireless data transmission for the of a data cable integrated wireless With Integrated Wireless, you have a new Integrated Wireless data transmission system from Mahr for the of a cable. Data acquisition with a Digital Caliper is now even simpler: simply transmit your measuring data without being tangled up between cables directly into Microsoft Office Excel or via a keyboard code into any other Windows program or via a virtual interface box to your PC system. When using Integrated Wireless your data will be securely transferred. The sent data will be confirmed by a message appearing in the display of the measuring instrument, informing you whether the sent data has been transferred correctly, and/or whether you are in the reception of the i-stick. Integrated Wireless. With the Integrated Wireless receiver up to 8 wireless measuring instruments can be connected per i-stick. j 170,-- Order no integrated wireless IP67 j 170,-- Order no Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reference-Lock/ Unlock, Auto-ON/OFF, Hold, DATA Integrated wireless interface Immediate measurement due to the Reference system Life of the battery up to 3 years (0.5 year when the wireless sender is activated) High contrast Liquid Crystal Display with 11 mm high digits Slide and beam made of hardened stainless steel NEW: MarCom 4.0 Software Professional includes a virtual Interface- Box for simple connection to a SPC software, see page 16. Resolution Depth rod Order no. Offer mm (inch) mm / inch Euro 16 EWRi 150 (6 ) 0,01 / ,-- 16 EWRi 150 (6 ) 0,01 / ,-- Order no. Euro i-stick Wireless Receiver incl. MarCom Standard Software ,-- With the MarCom Standard-Professional 4.0 Software (see page 16) up to 8 Integrated Wireless measuring instruments can be connected to an i-stick.

3 + 3 MarCal. Digital Caliper 16 EWRi Starter set includes i-stick and MarCom Software integrated wireless IP67 j 199,-- Order no i-stick Wireless Receiver Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reference-Lock/ Unlock, Auto-ON/OFF, Hold, DATA Integrated wireless interface Immediate measurement due to the Reference system Life of the battery up to 3 years (0.5 year when the wireless sender is activated) High contrast Liquid Crystal Display with 11 mm high digits Slide and beam made of hardened stainless steel Includes i-stick Wireless Receiver with MarCom Standard 3.1 NEW: MarCom 4.0 Software Professional includes a virtual Interface- Box for simple connection to a SPC software, see page 16. Resolution Depth rod Order no. Offer mm (inch) mm / inch Euro 16 EWRi Starter set* 150 (6 ) 0,01 / ,-- 16 EWRi Starter set* 150 (6 ) 0,01 / ,-- * Starter set includes an i-stick wireless receiver and MarCom Std 3.1 MarCal. Digital Caliper 16 EWR with Reference System, Protection Class IP67 IP67 DIN 862 from j 122,-- Order no Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reference-Lock/ Unlock, Auto-ON/OFF Immediate measurement due to the Reference system Excellent resistance against dust, coolants and lubricants, protection class IP67 Life of the battery up to 3 years High contrast Liquid Crystal Display with 8.5 mm high digits Lapped guide way Resolution Depth rod Data output Order no. Offer mm (inch) mm / inch Digimatic Euro 16 EWR 150 (6 ) 0,01 / ,-- 16 EWR 150 (6 ) 0,01 / ,-- 16 EWR 200 (8 ) 0,01 / ,-- 16 EWR 300 (12 ) 0,01 / ,--

4 - 4 MarCal. Digital Caliper 16 ER with Reference System Digimatic DIN 862 from j 68,-- Order no Sale: While stocks last! Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reference-Lock/ Unlock, Auto-ON/OFF Immediate measurement due to the Reference system data output, choose alternatively:, OPTO or Digimatic Life of the battery up to 3 years High contrast Liquid Crystal Display with 8.5 mm high digits Slide and beam made of hardened stainless steel Resolution Depth rod Order no. Offer mm (inch) mm / inch Euro 16 ER 150 (6 ) 0,01 / ,-- 16 ER 150 (6 ) 0,01 / ,-- 16 ER 200 (8 ) 0,01 / ,-- 16 ER 300 (12 ) 0,01 / ,-- MarCal. Digital Caliper 16 ER in a triple pack Digimatic DIN 862 Triple pack j 199,-- Order no Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reference-Lock/ Unlock, Auto-ON/OFF Immediate measurement due to the Reference system data output, choose alternatively:, OPTO or Digimatic Life of the battery up to 3 years High contrast Liquid Crystal Display with 8.5 mm high digits Slide and beam made of hardened stainless steel Sale: While stocks last! Resolution Depth rod Order no. Offer mm (inch) mm / inch Euro 16 ER 3-er Pack 150 (6 ) 0,01 / ,-- 16 ER 3-er Pack 150 (6 ) 0,01 / ,--

5 + 5 MarCal. Digital Caliper 18 EWR with Reference System, Protection Class IP65 IP65 Digimatic Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reference-Lock/ Unlock, PRESET, DATA (Data transmission via connection cable), Auto-ON/OFF Immediate measurement due to the Reference system Excellent resistance against dust, coolants and lubricants, protection class IP65 data output, choose alternatively:, OPTO or Digimatic Life of the battery up to 3 years High contrast Liquid Crystal Display with 8.5 mm high digits Rounded measuring blades for inside measurement from j 309,-- Order no Resolution Order no. Offer mm (inch) mm / inch Euro 18 EWR 300 (12 ) 0,01 / ,-- 18 EWR 500 (20 ) 0,01 / ,-- from j 339,-- Order no Resolution Order no. Offer mm (inch) mm / inch Euro 18 EWR 300 (12 ) 0,01 / ,-- 18 EWR 500 (20 ) 0,01 / ,--

6 - 6 MarCal. Universal Digital Caliper Set 16 EWV with Reference System, Protection Class IP67 IP67 DIN 862 Digimatic j 409,-- Order no Applications: The 16 EWV can also be used as a standard caliper (4 types of measurement). When used in conjunction with the standard accessories (see table below); it is possible to measure recesses, grooves, etc.. In conjunction with the additional accessories; threads, bores, serrations, etc. can be measured. 16 Eea Anvils for outside measurements 16 Eei Anvils for inside measurements Functions: ON/OFF, RESET (Set display to zero), mm/inch, PRESET (for entering a numerical value), Reference-Lock/Unlock, DATA (Data transmission via connection cable), Auto-ON/OFF Immediate measurement due to the Reference system Excellent resistance against dust, coolants and lubricants, protection class IP67 data output, choose alternatively:, OPTO or Digimatic Life of the battery up to 3 years High contrast Liquid Crystal Display with 8.5 mm high digits Lapped guide way Includes 3 pairs of Anvils, Force Device, Setting Gage, Depth Bridge Standard Accessories are included in the set Catalog no. Description Req d quantity Remarks 16 Em Depth Bridge 1 16 Eel Setting Gage for inside measurement 1 16 Ec Force Device 1 16 Eea 1 Anvils for outside measurement 2 up to dia. 175 mm 16 Eea 2 Anvils for outside measurement 2 up to dia. 175 mm 16 Eea 3 Anvils for outside measurement 2 up to dia. 175 mm 16 Eei 1 Anvils for inside measurement 2 from dia. 27 mm 16 Eei 2 Anvils for inside measurement 2 from dia. 39 mm 16 Eei 3 Anvils for inside measurement 2 from dia. 39 mm Screws M2 x 8 2 * Resolution Order no. Offer mm (inch) mm / inch Euro 16 EWV 200 (8 ) 0,01 / ,-- * in conjunction with accessories the measuring may change

7 + 7 Digimar. Height and Scribing Instrument 814 SR 1D j 460,-- Order no Digimatic Extremely stable and rigid column, with a stronger cross section for exact scribing and measuring tasks Clamping lever to quickly lock the slide Hand crank for positioning and measuring Functions: RESET (Zero setting the display for Relative measurement), ABS (Switching from Relative to Absolute measurement), mm/ inch, Reference-Lock/Unlock, PRESET (enter a numerical value) Immediate measurement due to the Reference system data output, choose alternatively:, OPTO or Digimatic High contrast Liquid Crystal Display with 12 mm high digits Life of the battery up to 3 years Hardened and lapped contact surface which produce both a smooth and even movement Sturdy heavy-duty base, easy to handle Resolution Order no. Offer mm (inch) mm / inch Euro 814 SR 350 (14 ) 0,01 / , SR 600 (24 ) 0,01 / ,-- Micromar. Micrometer 40 A DIN j 38,50 Order no Hard lacquered steel frame Spindle and anvil made of hardened steel, carbide tipped Scales with satin-chrome finish Heat insulators Rapid drive with integrated ratchet Locking device Readings Spindle thread pitch Order no. Offer mm mm mm Euro 40 A ,01 0, ,50

8 - 8 Micromar. Micrometer with integrated Dial Comparator 40 F DIN j 619,-- Order no Chrome plated steel frame, heat insulated Maximum stability Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance spindle made of stainless steel, hardened throughout and ground, lockable Constant measuring force Retraction faces Order no. Offer Flatness Parallelism mm mm µm µm Euro 40 F , ,-- 40 F , ,-- Micromar. Digital Micrometer 40 ER / Digital Micrometer 40 EWR ABS IP40 j 119,-- Order no Functions: RESET (Zero setting the display for Relative measurement), ABS (Switching from Relative to Absolute measurement), mm/inch, PRESET (enter a numerical value) Immediate measurement due to the Reference system High contrast Liquid Crystal Display with 8.5 mm high digits Hard lacquered steel frame, heat insulated spindle and anvil are carbide tipped IP65 j 149,-- Order no Resolution Data output Protection class IP Order no. Offer mm mm / inch Digimatic Euro 40 ER ,001 / ,-- 40 EWR ,001 / ,-- 40 EWR ,001 / ,--

9 + 9 Micromar. Digital Micrometer Set 40 EWR DIN j 985,-- Order no Supplied with: Custom fitted plastic case, setting standards 25 mm, 50 mm and 75 mm Application Resolution Data output Order no. Offer mm (inch) mm / inch Digimatic Euro 40 EWR ,001 / ,-- Micromar. Self-Centering Inside Micrometer Sets 44 AS DIN j 1.399,-- Order no Supplied with: Custom fitted plastic case and includes ring gages From 12 mm the anvils can be used to measure to the bottom of a bore Self-Centering measuring head From 40 mm all measuring heads are made from aluminum to reduce weight Applications For measuring: through holes blind holes centering shoulders Number of Micrometers Ring gages Order no. Offer mm mm ø mm Euro 44 AS / ,-- 44 AS ,-- 44 AS / ,-- 44 AS / ,--

10 - 10 Micromar. Digital Self-Centering Inside Micrometer Sets 44 EWR DIN From j 1.125,-- Supplied with: 1 Basic Unit 44 EWg, Heads 44 Ak, case and ring gages Self-Centering measuring head From 40 mm all measuring heads are made from aluminum to reduce weight Applications For measuring: through holes blind holes centering shoulders From 12 mm the anvils can be used to measure to the bottom of a bore Number of measuring Ring gages Order no. Offer mm (inch) heads 44 Ak dia. mm Euro 44 EWR 6-12 ( ) 3 8 / ,-- 44 EWR ( ) ,-- 44 EWR (1-2 ) 4 25 / ,-- 44 EWR (2-4 ) 4 60 / ,-- Millimess. Mechanical Dial Comparator 1003 in a triple pack SHOCK PROOF DIN Triple pack Shockproof movement Maximum sensitivity and accuracy are ensured by the jewelled movement in conjunction with the precision gears and pinions Lockable fine adjustment screw Easy to read scale j 449,-- Order no Readings Order no. Offer mm Euro Millimess Triple pack ± 50 µm 1 µm ,--

11 + 11 MarTest. Test Indicators 800 SHOCK PROOF Sealed, water proof dial face Anti magnetic Movement bearings are jewelled j 65,-- Order no j 71,-- Order no S 800 SG j 94,-- Order no SGM j 105,-- Order no SL Readings Dial diameter Length of Order no. Offer styli mm mm mm mm Euro 800 S ± 0,4 0,01 27,5 14, , SG ± 0,4 0, , , SGM ± 0,1 0, , , SL ± 0,25 0,01 27,5 41, ,-- MarCator. Precision Dial Indicator 810 A High precision gears and pinions Colored adjustable tolerance markers for optimum contrast Chrome plated metal housing Lifter protection cap with dust protection function Delivered in plastic case DIN 878 j 29,50 Order no Range Readings Dial diameter Order no. Offer mm mm mm Euro 810 A 10 0, ,50

12 - 12 MarCator. Digital Indicators 1075 R IP52 Digimatic j 109,-- Order no Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (for entering a numerical value), DATA (in data transmission with a data connection cable), LOCK-Function: Individual buttons can be locked, Auto-OFF (selectable) Immediate measurement due to the Reference system High contrast Liquid Crystal Display with12 mm high digits Life of the battery up to 3 years (2000 operating hours per year) data output, choose alternatively:, OPTO or Digimatic j 219,-- Order no R 12,5 mm 0,01 / R 12,5 mm 0,001 / Reference System - Just set once to zero The new Digital Indicators 1075 R are equipped with the innovative Reference-System. The zero position only has to be set one time: once it is set, the zero remains stored for all further measurements. Therefore, when the indicator is switched ON or the measuring spindle is moved the indicator is immediately ready for measurement; thus the need to reset as with a conventional indicator is now obsolete. Resolution Order no. Offer mm (inch) mm / inch Euro 1075 R 12,5 (.5 ) 0,01 / , R 12,5 (.5 ) 0,005 / , R 12,5 (.5 ) 0,001 / ,--

13 + 13 MarCator. Digital Indicators 1086 R / 1087 R MarCator 1086 R Functions: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of the counting direction, PRESET (for entering a numerical value), TOL (Enter tolerance limit values), ABS (Display can be set to zero, without losing the reference to the Preset value), <0> (Tolerance GO / NO GO display mode), DATA (when connected with a data connection cable), Factor (adjustable) Immediate measurement due to the Reference system data output, choose alternatively:, OPTO or Digimatic High contrast LCD with 11 mm high digits Life of the battery up to 3 years (ca working hrs/year) ABS 0 TOL j 335,-- Order no Digimatic IP42 MarCator 1087 R Features are identical to MarCator 1086 R, in addition: MAX/MIN memory, ideal for searching the reversal point, TIR (MAX-MIN) ideal for testing concentricity and flatness Combined digital and analog display j 265,-- Order no R 12,5 mm 0,001 / R 12,5 mm 0,001 / R 12,5 mm 0,01 /.0005 j 215,-- Order no Resolution Order no. Offer mm (inch) mm / inch Euro 1086 R 12,5 (.5 ) 0,001/ , R 12,5 (.5 ) 0,01/ , R 12,5 (.5 ) 0,001/ , R 25 (1 ) 0,001/ ,--

14 - 14 MarCator. Digitale Indicators Messuhren Ri / Ri 1087 Ri ABS IP42 0 TOL Digimatic integrated wireless Functions 1086 Ri: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of the counting direction, PRESET (for entering a numerical value), TOL (Enter tolerance limit values), Tolerance band max. 1.6 mm, ABS (Display can be set to zero, without losing the reference to the Preset value), 0 (Set analog display to zero) DATA (when connected with a data connection cable), Factor (adjustable) Functions 1087 Ri Features are identical to 1086 Ri, in addition: MAX/MIN memory, ideal for searching the reversal point, TIR (MAX- MIN) ideal for 0 (Set analog display to zero) Immediate measurement due to the Reference system Individual buttons can be locked - Lock Function High contrast LCD 11 mm (1086 Ri) or 8,5 mm (1087 Ri) high digits Life of the battery up to 3 years (0.5 year when the wireless sender is activated) Integrated wireless interface data output, choose alternatively:, OPTO, Digimatic or Integrated Wireless j 345,-- Order no j 306,-- Order no j 379,-- Order no With integrated wireless interface MAX MIN NEW: MarCom 4.0 Software Professional includes a virtual Interface- Box for simple connection to a SPC software, see page 16. Resolution Order no. Offer mm (inch) mm (inch) Euro 1086 Ri 12,5 (.5 ) 0,001 / , Ri 25 (1 ) 0,001 / , Ri 12,5 (.5 ) 0,001 / ,--

15 + 15 MarCator. Digital Indicators 1086 Ri ABS IP42 0 TOL Digimatic Funktionen: ON/OFF, RESET (Set display to zero), mm/inch, Reversal of the counting direction, PRESET (for entering a numerical value), Tolerance band max. 1,6 mm, ABS (Display can be set to zero, without losing the reference to the Preset value), 0 (Set analog display to zero), DATA (when connected with a data connection cable), Factor (adjustable) Immediate measurement due to the Reference system Individual buttons can be locked - Lock Function High contrast LCD with 11 mm high digits Life of the battery up to 3 years (0.5 year when the wireless sender is activated) Integrated wireless interface data output, choose alternatively:, OPTO, Digimatic or Integrated Wireless integrated wireless j 325,-- Order no j 255,-- Order no With integrated wireless interface NEW: MarCom 4.0 Software Professional includes a virtual Interface- Box for simple connection to a SPC software, see page 16. Resolution Order no. Offer mm (inch) mm/inch Euro 1086 Ri 12,5 (.5 ) 0,01 / , Ri 25 (1 ) 0,01 / ,-- Order no. Euro i-stick Wireless Receiver incl. MarCom Standard Software ,-- With the MarCom Standard-Professional 4.0 Software (see page 16) up to 8 Integrated Wireless measuring instruments can be connected to an i-stick.

16 Mahr. Produc MarCom Professional 4.0 Whether you are using the tried and tested interface or the new wireless data transmission Integrated Wireless, the MarCom software enables you to transmit data quickly and easily from a measuring station to a PC. Inexpensive, because no interface is required. Data acquisition with MarCom Professional 4.0 now no longer requires an interface box; yet you still have the functionality of an interface box. instruments Trouble free connection to measuring instruments With MarCom all Mahr measuring instruments with interfaces (RS232, ) or Integrated Wireless can be connected; simply extend the measuring workplace with Hubs. integrated wireless Flexible data transmission Regardless of whether you are using a foot switch, directly on a measuring instrument, with a Timer function or with a PC keyboard: MarCom is extremely flexible and enables freely configurable measuring cycles. Integrated Wireless RS232 integrated wireless Measured value

17 t Information j 179,-- Order no NEW! Simple connection to SPC software Data acquisition via SPC software Simply connect your Mahr measuring instruments with the box emulation (MUX-50 Format) from MarCom Professional 4.0. In your SPC software select a MUX-50 compatible interface box, once selected you can start to obtain the measured values from all the connected Mahr measuring instruments. MarCom 4.0 Data acquisition Simple acquisition in Microsoft Office Excel Whether you use an existing Excel template or you wish to create a customized template, the cell controller from MarCom is highly flexible. Data acquisition with a keyboard code in a windows application Do you use an application which the connection of a measuring instrument does not allow? No problem! With the keyboard emulation from MarCom the measured values will be directly sent to the active cells in the programme. Order no. Euro MarCom Software ,--

18 - 18 Körfutáseltérés Digimar. Height Instrument Digimar 817 CLM Quick Height Digimar 817 CLM Quick Height. 350 / 600 / 1000 mm : The Height Highly accurate rapid measurements, a wide of measuring and Fast measurement... QUICK MODE... per Hand with Quick- Mode (patented) j 4.550,-- Order no Display Comfort to operate all measurement functions with the function keys 817 CLM mm mm Application mm Resolution mm 0,01 / 0,005 / 0,001 / 0,0005 / 0,0001 error* µm 1,8+L/600 (L in mm) QUICK Quick Mode MODE 1D 1-D 2D 2-D Motorized measuring carriage Bore diameter Max-Min 0 Tolerance monitoring TOL Perpendicularity / Straightness measurement Angle calculation STAT Statistics PROG programs C Temperature compensation Air bearings Integrated memory Data interface RS232 RS232 RS232 printer interface Order no Euro 4.550, , ,-- * At 20 C in conjunction with a base plate in accordance to DIN 876/0 and a standard probe K6/51

19 + 19 Instrument Digimar 817 CLM with the innovative Quick Mode. evaluation possiblities and excellent operator comfort. j 4.990,-- Order no Easy to operate all functions can be operated via the speed keys j 8.390,-- Order no Operating and display unit with back-lit display Perpendicularity and straightness measurements program for repetitive measurements / serial components PROG 817 CLM mm Max-Min Dynamic measuring functions Determine MAX, MIN, MAX-MIN with just one measurement. Max-Min Max-Min 817 CLM mm Max-Min Parallel deviation Roundness deviation

20 - 20 Digimar. Height Instrument Digimar 816 CL Digimar 816 CL 350 / 600 mm: The robust and user-friendly height on measuring instrument, perfect for accurate measurements on the production line. 1D PROG Features Easy to operate all functions can be operated via the speed keys j 3.690,-- Order no Operating and display unit with an background illuminated graphic display The motorized measuring carriage minimizes the influence caused by the operator program for serial parts 816 CL mm 20 C Temperature compensation for precise results even outside of the inspection room mm Application mm Resolution mm 0,01 / 0,001 error* µm (2,8+L/300), L in mm 1D 1-D Motorized measuring carriage Bore diameter Max-Min PROG program C Temperature compensation Air bearings, 3-point air cushion Data interface Opto RS232 / Order no Euro 3.290, ,-- * At 20 C in conjunction with a base plate in accordance to DIN 876/0 and a standard probe K6/51 Max-Min Max-Min Max-Min Determine MAX, MIN, MAX-MIN with just one measurement Parallel deviation Max-Min Roundness deviation Extensive possibilities of evaluation Transmit data to a PC via, RS232 or wireless for example into Microsoft Office Excel via the MarCom-Software.

21 + 21 MarSurf. Mobile Roughness Measurement Device MarSurf PS1 incl. PS1 Explorer Software Digimatic j 1.850,-- Order no The set consists of: Drive unit with traversing lengths up to 17,5 mm Skidded probe with measuring 350 µm, 2 µm/90 diamond stylus tip, measuring force 0,7 mn Height adjustment accessory, cable, carrying case, charger / mains adapter and much much more Multilingual PS1-Explorer PC Software - document results and saving profiles on a PC Special features Roughness standard integrated into casing Automatic cutoff selection (patented) so that even non-specialists are ensured correct measuring results. Dynamic calibration function with automatic value correction adjustment Calculation of 31 parameters Large display Individual and short sampling lengths can be selected Phase-correct profile filter (Gaussian filter) as per DIN EN ISO 11562, special filter as per DIN EN ISO , ls-filter as per DIN EN ISO3274 (can be disabled) µm / µnch switchable 15 languages can be selected interface is detected without a driver (such as a memory stick). Internal memory enables maximum 15 profiles or max. 20,000 results to be saved. Additional accessories are also available such as evaluation software, of probes, adapter for transverse tracing, end face veeblock, measuring stand mount, etc. Order no. Euro PS 1 incl. PS1-Explorer Software ,-- On-site surface roughness measurement measuring during the production process Universal use on processing machinery or for incoming goods inspection

22 - 22 MarSurf. Mobile Roughness Measurement M 300 Set j 3.480,-- Order no The set consists of: Evaluation unit M 300 Drive unit RD 18 with integrated roughness standard Standard pick-up PHT 6-350/2µm (conforming to standards) Height adjustment accessory, pick-up protection, 2 x cables, carrying case, etc. RD 18 Special features Cable-free connection with Bluetooth Automatic selection of filter and traversing length conforming to standards Integrated thermal graphics printer of high print quality Data transfer of results and profiles via -interface to your PC Dynamic calibration function Evaluation of the common parameters as per ISO /JIS as well as characteristic curves, parameter lists (i. e. material ratio) Integrated memory for the results and measurements Tolerance monitoring in display and measuring record Printing of R-profile (ISO/ASME/JIS), P-profile (MOTIF), material ratio curve, measuring record 15 languages Units of measurement (μm/μinch) and standards (ISO/JIS/ASME/ MOTIF) are selectable Number of sampling lengths selectable from 1 to 5 Locking and/or password protection for instrument settings Plug-in power pack with three mains plugs, for input voltages from 90 V to 264 V Output of date and/or time of the measurements Order no. Euro M 300 Set ,-- Simply scan the QR-Code and watch in the Mahr YouTube-channel a video about the Mobile Roughness Measurement MarSurf M 300.

23 + 23 MarSurf. Mobile Roughness Measurement M 300 C Set j 3.480,-- Order no Upside down measurement RD 18 C + Handheld Vee block (detachable) M 300 C Measurement on an end face vee The set consists of: Evaluation unit M 300 C Drive unit RD 18 C Standard pick-up PHT 6-350/2µm (conforming to standards) Roughness standard PRN 10 with a Mahr calibration certificate Height adjustment accessory, pick-up protection, 1 x cable (for connection to a PC), carrying case, etc. Special features Automatic selection of filter and traversing length conforming to standards Integrated thermal graphics printer of high print quality Data transfer of results and profiles via -interface to your PC Dynamic calibration function Evaluation of the common parameters as per ISO /JIS as well as characteristic curves, parameter lists (i. e. material ratio) Integrated memory for the results and measurements Tolerance monitoring in display and measuring record Printing of R-profile (ISO/ASME/JIS), P-profile (MOTIF), material ratio curve, measuring record 15 languages Units of measurement (μm/μinch) and standards (ISO/JIS/ASME/ MOTIF) are selectable Number of sampling lengths selectable from 1 to 5 Locking and/or password protection for instrument settings Plug-in power pack with three mains plugs, for input voltages from 90 V to 264 V Output of date and/or time of the measurements Order no. Euro M 300 C Set ,-- Note: An additional seperate drive unit MarSurf RD 18 C2 for transverse tracing for M 300 C is also available!

24 - 24 MarVision. Stereo-Zoom Microscope SM 150 / SM 151 / SM 160 j 730,-- Order no High quality optics for light intensive and sharp three dimensional images Continuously variable magnification due to the adjustable zoom lens Focusing with an ergonomic hand wheel, mounted either side, ideal for either a left or right handed operator Prism head tilted to 45 and rotatable through 360 ; with the dioptric adjustment Integrated incident and transmitted illumination, continuously variable (only with SM 150 / SM 151) Includes packaging j 1.020,-- Order no SM 150 MarVision. SM CamSet j 1.500,-- Order no SM 160 Order no. Euro SM 151 incl. CamSet ,-- Accessories for Microscopes see Dimensional Metrology catalog, Chapter 18 SM 150 SM 160 SM 151+CamSet* Magnification variable 7x - 45x Field of view mm 28-5 Observation tube angle 45 Optical tube Binocular Binocular Trinocular Camera connector Working distance mm 105 Max. height of test piece mm Illumination Incident light 12V /15W, Incident light 12V /15W, Transmitted light 12V / 10W, variable Transmitted light 12V / 10W, variable Base dimensions mm 260 x x x 200 Order no Euro 730, , ,-- * Includes a digital camera

25 + 25 Accessoire pour microscopes, voir notre catalogue, chapitre 18 MarVision. Video Workshop Microscope QM 300 with M3-Software and Touchscreen-PC LED Ring light High resolution camera plus LED incident and transmitted light j ,-- Order no User friendly measurement software Visual indicator of the height adjustment Large supporting surface QM 300 Height adjustment Video Workshop Microscope QM 300 Telecentric fixed lens Integrated color camera LED ring light: dimmable LED transmitted light Automatic edge detection Automatic measurement of all features of a component within the image field Depth of focus ca. 10 mm DXF function: compares measurement with the CAD drawing Measurement and evaluation functions for points, lines, circles, angles, distances and intersecting straight lines. Magic function is a time saving feature which automatically recognizes the geometric pattern of data points Simply create a measuring program with the Teach-In mode Easy program sequence due to on screen graphic guidance Lighting controls M3-Software with Touchscreen-PC Similar to illustration depends upon the PC manufacturer) Operator prompts are available in several languages printer port port Updates can be obtained via an stick, thus future is secured Characteristics of the M3-Software with Touchscreen-PC 23 Touchscreen with keyboard and mouse Based on Windows; thus it is possible to install further software Operated via the Multi-Touch on the monitor or via mouse/keyboard Large video image Protocol print out with company logo Automatic edge detection even with low constrast parts * Further sizes(57 mm x 42 mm, 96 mm x 72 mm) are available upon request QM 300 / image field mm 32 x 24* Height adjustment mm 30 Measurement error E 2 4,0+L/50 (L in mm) Camera system 5 Megapixel 3 Incident light LED ring light Transmitted light LED telecentric Dimensions QM 300, D x W x H mm 330 x 230 x 580 Order no Euro ,-- Accessories for Microscopes see Dimensional Metrology catalog, Chapter 18 Punched parts Gears Rubber seals

26 - 26 MarVision. Workshop Microscope MM 320 with image processing Manual 2D- Microscope with either fixed, zoom or motorised zoom lens and an automatic edge recognition for simple and precise measurements of bores, angles and distances. Ideal for use on the production line. MarVision MM 320 from j ,-- Stabile Z column, adjustable 200 mm (optional extended by 200 mm) Height adjustment (fine /coarse; on both sides) for precise focusing 4 quadrant LED ring lights LED-transmitted light M3-Software with Touchscreen-PC Similar to illustration Stable granite base, max. load 20 kg Quick setting for fast bridging over large distances MM 320 Ill: Fine setting for more accurate positioning MM 320 with Grid martrix Navitar Zoom lens (with x magnification) for secure magnification settings Industrial branch based solutions Electronics Industry (Circuit boards, resistors, soldering joints...) Medical Technology (Artificial joints, medical instruments for example, cannulae / needles..) Plastics (rigid and flexible components, for example, gaskets / seals, diaphragms, filters) Metal working (precision punched and bent components, turned parts, cutting tools, cutting plates...) Mechanical engineering (gears, surface finish, burr formation of all types of components Further applications (foils, filers, all types of small components)

27 + 27 Objective / lens Fixed Zoom Motorised Zoom Magnification select either 30x, 60x, 90x 0,7x - 4,5x 6,5:1 X/Y mm 200 / 100 Z travel mm 200 table dimensions mm 370 x 210 Max. table load (max) kg 20 system: built-in incremental measuring scale - Resolution mm 0,001 - MPE E 1 X / Y in µm (L in mm) 1,9 +(L/100) - MPE E 2 XY in µm (L in mm) 2,9 +(L/100) Working distance mm 85 Max. height of test piece mm 90 Illumination LED Incident and transmitted light. individually adjustable Dimensions H x W x D mm 700 x 650 x 550 Order no Euro , , ,-- Delivery terms: ex works, without packaging Characteristics of the M3-Software with Touchscreen-PC 23 Touchscreen with keyboard and mouse Based on Windows; thus it is possible to install further software Operated via the Multi-Touch on the monitor or via mouse/keyboard Large video image Protocol print out with company logo Automatic edge detection even with low constrast parts Graphical presentation including dimensions Evaluation of nominal and actual values with tolerance specifications Further measuring s: 100 x 100 mm 250 x 170 mm 400 x 250 mm (Incl. Z-axis extensions) Additional options: Telecentric LED back light (Order no ) Incident light (Order no ) Calibration standard incl. calibration certificate (Order no ) Extension of the Z-Axis, 200 mm (Order no ) system for Z-Axis Wide of accessories DXF file integration Training Calibration and repair service Creation and downloading und DXF data Consigning tolerance limits Generate Overlays Summary of GO and NO GO Simply scan the QR-Code and watch in the Mahr YouTube-channel a video about the Microscope MarVision MM 320

28 - + dimensional metrology Precision Gages Precimar. Precision Length Metrology MarSurf. Surface Metrology MarForm. Form Metrology MarGear. Gear Metrology MarVision. Optical Metrology MarShaft. Shaft Metrology Services Simply scan the QR-Code and find out more about Mahr in our YouTubechannel. Mahr GmbH Standort Esslingen Reutlinger Straße 48, Esslingen Tel.: , Fax: mahr.es@mahr.com, by Mahr GmbH We reserve the right to make changes to our products, especially due to technical improvements and further developments. All illustrations and technical data are therefore without guarantee