Stillingsbetegnelse: Team Lead, Offshore Site Management Rekvisitions-id Publiceret 16/04/ Danmark - Vejle - Energy Sector - Project

Transcription

1 Stillingsbetegnelse: Team Lead, Offshore Site Management Rekvisitions-id Publiceret 16/04/ Danmark - Vejle - Energy Sector - Project Management - Mellemstor erfaring (>3 år) - Permanent - Kun fuldtid - Daily management of Installation Leads Job ID: Location: Vejle Organization: Siemens in Denmark Siemens Wind Power Mode of employment: full time For our Offshore Project Site Execution department located in Vejle, Denmark, we are looking for a strong and dedicated Team Leader to manage and develop our group of Installation Leads. The members of the group are located at our wind turbine sites all over Europe, thus some travel can be expected. What are my responsibilities? Daily management of the Installation Lead group Planning and allocating resources at our sites Ensuring coherence between the resources and tasks within the group Ensuring that professional competency is present in the group according to the area of responsibility Being responsible for hiring new employees in cooperation with the recruiting department Ensuring that the group is motivated, and conducting personal development sessions with each employee What do I need to qualify for this job? You possess excellent management skills and have experience in the management of remote groups of people. You have strong technical knowledge and flair in general, and you have preferably gained experience working at a wind turbine site. As a person, you are patient and understand the importance of continuous management and motivation of people from a distance. You have an analytical and structured mindset and a pragmatic approach to problem solving. Furthermore, you possess excellent English skills both orally and in writing, and you have IT experience, especially with MS Office. If you have acquired your skills in alternative ways, your application is just as well appreciated. What else do I need to know? Siemens is a leading supplier of wind power solutions for onshore, offshore and coastal sites. Denmark is the headquarters of Siemens activities in Europe, the Middle East and Africa and the center of our global R&D and engineering activities. Currently, 5,000 employees out of a global staff of more than 9,000 are working at different locations in Denmark. Read more at We continuously strive to strengthen our position, and we are therefore looking for bright minds eager to join a dynamic, international organization offering unique opportunities for its employees. Apply for the job online in English at Please note that we will reply by . We are looking forward to receiving your online application. Please ensure you complete all areas of the application form to the best of your ability as we will use the data to review your suitability for the role. For further information, please contact the recruiting team (RM19) at tel.:

2 Auto req ID 91BR Title Senior Engineer - Low Frequency EMC Job Area Research & Development Country / Countries Denmark Location Gråsten Job Description Are you an experienced electrical engineer with substantial knowledge within low frequency EMC? If so, you could be our new Senior Engineer within the EMC engineering department in Danfoss Power Electronics. We are responsible for handling all EMC aspects in the design and development phase and are involved in international EMC standardisation activities. We have strong design tools and test facilities in-house and you can look forward to join a highly technical and inspiring environment. Design and development of EMC compliant products As Senior Engineer your overall focus will be to ensure that our products are in compliance with international low frequency EMC standards as well as internal quality requirements. More specifically you: Participate in product development projects, from start to finish, by: Specifying low frequency (LF) EMC requirements on product level Reviewing product concept and hardware design Defining LF test methods Executing LF engineering tests and anticipating technical risks Validating LF test results Participate in international EMC standardisation work Perform troubleshooting and mitigation of LF EMC noise problems at customer sites, for example solving problems related to bad power quality You will be based in Graasten, and you must anticipate travel days per year. Analytic electrical engineer with solid practical experience You hold a Master s or a Bachelor s degree in Electrical Engineering. Moreover, you have at least five years practical experience with development of electronics, preferably power electronics. Besides, you have working knowledge within low frequency EMC meaning defining LF requirements as well as testing/analysis and has in-dept knowledge about power installations (e.g. transformers). You thrive working in teams and have an outgoing and positive attitude. Moreover, you act proactively and have an ability to spot potential problems in due time. Your strong communication skills enable you to navigate between different organisational levels. Last but not least, you are proficient in written and spoken English. For further information about the position, please contact Manager, EMC Engineering, Marie Louise Petersen on

3 Auto req ID 44BR Title SAP ME System Architect Global Supply Chain Job Area Production & Quality Country / Countries Denmark Location Gråsten Job Description Do you have solid IT competencies and are you experienced within the SAP ME Platform? Are you geared for a job where you unfold your technical competencies and business understanding in an environment with a complex business and system architecture? Then we have an opening in the Danfoss Power Electronics department for a System Architect to take part in the recently launched project of qualifying and potentially rolling out SAP ME globally in the Danfoss organisation. You will join an experienced team of seven dedicated colleagues in our Global Supply Chain IT department managing the pioneering task of aligning and making our global IT system scalable. Some travel activity must be expected due to the international character of the position, but the main part of your workdays will be in our office in Gråsten. Design, development and alignment Your overall mission will be to define the future Manufacturing Execution System (MES) and participate in rolling out/implementing the new platform and provide support to the global Danfoss Power Electronics manufacturing footprint (DK, US, CN). Interacting with users/customers on all levels, you will understand basic system requirements, and through your experience with MES, you will then implement solutions that fit business needs and optimise the work on the production floor while ensuring a global and scalable platform. Specifically, your key tasks will be to: Analyse business cases and advise internal users on system potential Design and run MES solutions for new production areas/lines Participate in high level development tasks/customisation Gather information from customers and translate them into system solutions Secure coordination with other System Architect colleagues within other areas Global mindset and experience with SAP ME platform You hold a BSc in Computer Science, Information Technology, Manufacturing Engineering or equivalent and have solid working experience with the SAP ME platform. You are up to date on state-of-the-art solutions/functionalities within the area of MES solutions, preferably obtained from working in a manufacturing/logistic environment. On a more personal note, you are a team player with a holistic and global mindset with excellent communication skills within written and spoken English and Danish. For further information about the position, please contact Director for Global Supply Chain IT Systems Brian R. Svendsen on

4 Auto req ID 178BR Title Product Manager Floor Heating Hydronics Job Area Production & Quality Country / Countries Denmark Location Vejle Job Description Would it appeal to you to be one of the key players setting the direction for Danfoss future product portfolio? And do you have exhaustive commercial and strategic experience within technical product management? Then please keep on reading as you could be our new Product Manager for Danfoss Floor Heating Hydronics. We are characterised by an entrepreneurial spirit, impressive results and ambitious global growth perspectives. Our mission is to develop, produce and supply products and solutions that contribute to lower energy consumption and improved indoor comfort in commercial and residential buildings. The position is located in Vejle and will entail 3-5 travelling days per month. Trend spotter and in-house product ambassador As a Product Manager you will focus on the entire product portfolio. Your overall mission will be to ensure that products, ranging from business case generation to launched products, always have the functionality and strategic impact required in main and adjacent markets. With your strategic, commercial and financial skills, you will be our trend spotter who turns business opportunities into products, gaining new ground-breaking knowledge, seeking out solutions and making things happen. You will act as a product ambassador in our organisation, and we rely on you to participate in our ambitious growth strategy, acting as a role model and as inspiration for your colleagues. Key responsibilities within the position will be: Gaining knowledge of known and new markets and trends Maintaining an overview of product and application knowledge Facilitating cross functional commitment and knowledge sharing Documentation Developing online material Training and coaching colleague Technical background with strong commercial and strategic product management skills You have an engineering degree at minimum bachelor s level or other similar and preferably a commercial education. You have exhaustive working experience within product development and product management and can demonstrate a proven track record of strategic and commercial results in this regard. Your colleagues characterise you as a role model and a strong team player with a proactive approach, and your mind is set on development and results. Your professional background has given you the ability to operate in a complex organisation with many simultaneous activities and stakeholders. Moreover, you have excellent English communication skills maybe developed through an international job or education. For further information about the position, please contact Product Portfolio Director Ole Hansen on

5 Mechanical Designer Rekvisitions-id Publiceret 20/03/ Danmark - Vejle - Energy Sector - Engineering - Mellemstor erfaring (>3 år) - Permanent - Kun fuldtid - designing offshore wind turbine handling equipment Job ID: Location: Vejle Organization: Siemens in Denmark Siemens Wind Power Mode of employment: full time Our portfolio of significant, technically complex offshore wind farms is increasing worldwide Therefore, we are looking for Mechanical Engineers for the Offshore Engineering department located in Vejle, Denmark. As a Mechanical Engineer you will be responsible for the development and detailed design of equipment needed for transporting, lifting and storing large wind turbine components on their way from the production plant to the installation sites offshore. You will also take part in the development of tomorrow s turbine installation technology. What are my responsibilities? Analyzing the logistical value chain with regard to handling equipment Making conceptual design of new equipment Redesigning existing equipment Performing structural analyses of equipment Creating documentation related to the use of the equipment Providing technical back office support to project and sales teams during the contract negotiation and execution phases What do I need to qualify for this job? You have a strong technical background and minimum a Bachelor s degree in Mechanical Engineering, preferably combined with 3+ years of engineering experience from the wind turbine business or similar industries where large components are handled. Furthermore, it would be an advantage if you have experience with both design and structural analysis. As a person, you are action-oriented, well-structured and able to create and maintain an overview of complex tasks. At the same time, you have a positive mindset and are good at networking, and you possess excellent English skills, orally as well as in writing. In case you have acquired your skills in alternative ways your application is just as well appreciated. What else do I need to know? Siemens is a leading supplier of wind power solutions for onshore, offshore and coastal sites. Denmark is the headquarters of Siemens activities in Europe, the Middle East and Africa and the center of our global R&D and engineering activities. Currently, 5,000 employees out of a global staff of more than 9,000 are working at different locations in Denmark. Read more at We continuously strive to strengthen our position, and we are therefore looking for bright minds eager to join a dynamic, international organization offering unique opportunities for its employees. Apply online in English for the job on Please note that we will reply by . We are looking forward to receiving your online application. Please ensure you complete all areas of the application form to the best of you ability as we will use the data to review your suitability for the role.

6 For further information, please contact the recruiting team (RM19) on phone: Deadline for Applications: as soon as possible

7 Mechanical Designer Rekvisitions-id Publiceret 20/03/ Danmark - Vejle - Energy Sector - Engineering - Mellemstor erfaring (>3 år) - Permanent - Kun fuldtid - designing offshore wind turbine handling equipment Job ID: Location: Vejle Organization: Siemens in Denmark Siemens Wind Power Mode of employment: full time Our portfolio of significant, technically complex offshore wind farms is increasing worldwide Therefore, we are looking for Mechanical Engineers for the Offshore Engineering department located in Vejle, Denmark. As a Mechanical Engineer you will be responsible for the development and detailed design of equipment needed for transporting, lifting and storing large wind turbine components on their way from the production plant to the installation sites offshore. You will also take part in the development of tomorrow s turbine installation technology. What are my responsibilities? Analyzing the logistical value chain with regard to handling equipment Making conceptual design of new equipment Redesigning existing equipment Performing structural analyses of equipment Creating documentation related to the use of the equipment Providing technical back office support to project and sales teams during the contract negotiation and execution phases What do I need to qualify for this job? You have a strong technical background and minimum a Bachelor s degree in Mechanical Engineering, preferably combined with 3+ years of engineering experience from the wind turbine business or similar industries where large components are handled. Furthermore, it would be an advantage if you have experience with both design and structural analysis. As a person, you are action-oriented, well-structured and able to create and maintain an overview of complex tasks. At the same time, you have a positive mindset and are good at networking, and you possess excellent English skills, orally as well as in writing. In case you have acquired your skills in alternative ways your application is just as well appreciated. What else do I need to know? Siemens is a leading supplier of wind power solutions for onshore, offshore and coastal sites. Denmark is the headquarters of Siemens activities in Europe, the Middle East and Africa and the center of our global R&D and engineering activities. Currently, 5,000 employees out of a global staff of more than 9,000 are working at different locations in Denmark. Read more at We continuously strive to strengthen our position, and we are therefore looking for bright minds eager to join a dynamic, international organization offering unique opportunities for its employees. Apply online in English for the job on Please note that we will reply by . We are looking forward to receiving your online application. Please ensure you complete all areas of the application form to the best of you ability as we will use the data to review your suitability for the role.

8 For further information, please contact the recruiting team (RM19) on phone: Deadline for Applications: as soon as possible

9 Hardware Developer RD Rekvisitions-id Publiceret 08/03/ Danmark - Nordborg - Industry Sector - Research & Development - Stor erfaring (over 10 år) - Permanent - Kun fuldtid Hardware developer R&D Digital design and test firmware Siemens Flow Instruments is experiencing strong growth and is seeking a competent hardware developer to fill a position in the competence centre on Als in Denmark. As part of the HW team, your main responsibilities will be design of digital circuits and to develop test firmware for proving the hardware functionality. About the job The HW team is responsible for all electronic HW related to our flow meters. This includes advanced analog interfaces to our sensors, time critical multi processor designs and a wide range of industrial communication interfaces. As the digital design and test FW specialist, you will be responsible for the digital design part and to secure testable HW. Further more you will be responsible for defining the test specification on a module level. Based on this specification you will create a dedicated test FW which ensures the HW fulfills all the features. After successful testing, the HW will be handed over to the Integration Test Team. In headlines you Are responsible for the digital design parts Secure design for testability and production Define the test specifications Ensure compliance with relevant standards Create test FW Professional and personal qualifications To be considered for this role you must possess an Engineering degree in Electronics or similar. You have minimum 3 years experience within digital designs including embedded microcontrollers. Additionally you have skills and interest in hardware related programming of embedded microcontrollers. It will be an asset if you have experience in industrial communication, FPGA and ASIC design as well as Functional Safety. Experience in C, C++ and assembler is required. Additionally you have good analytical and logical skills and preferably experience in testing. Since you will be working in a global company, you therefore need cultural sensitivity and flexibility in order to respond to different cultures. The company language is English, and German language skills would be an advantage. What we offer Successful candidates will possess a desire to be challenged professionally and personally and to contribute towards the success and growth of the business. In return we offer international career development, comprehensive internal training and a supportive working environment. On top of this you will get flexible working hours and a good social environment where humor and an informal and respectful tone go hand in hand. The position will give you the opportunity to travel for approximately 20 days per year. For more information

10 If you wish to discuss the position in confidence please do not hesitate to call Head of HW Department Caspar Laugesen, by phone

11 Deadline for Applications: as soon as possible