INVESTMENT RECOVERY SERVICES

Size: px
Start display at page:

Download "INVESTMENT RECOVERY SERVICES"

Transcription

1 INVESTMENT RECOVERY SERVICES DAY TWO - INDUSTRIAL MACHINE TOOLS AND SUPPLIER AUCTION 3609 Clinton Dr Texas United States Ended Jul 15, :12pm CT (Jul 16, :12am BST) Lot Description Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Vidmar Storage Cabinet, empty Drawer Lift Top Storage Cabinet with contents Drawer Lista Storage Cabinet, Axelson tooling Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents 2014 Proto 8 Drawer Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents (Lucas) Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents

2 Drawer Storage Cabinet with contents Drawer Storage Cabinet, empty Drawer Storage Cabinet with contents Drawer Storage Cabinet, Dean Smith & Grace tooling Drawer Vidmar Storage Cabinet, Summit tooling Drawer Storage Cabinet with contents Drawer Storage Cabinet with content (Cincinnati) Drawer Storage Cabinet with contents (Cincinnati) Drawer Storage Cabinet, empty Drawer Storage Cabinet, empty Drawer Storage Cabinet, empty Drawer Storage Cabinet with contents (Lodge & Shipley) Drawer Storage Cabinet with contents: misc. collets, some new in box Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents (Cincinnati) Drawer Storage Cabinet with contents (Cincinnati) Drawer Storage Cabinet with contents (Lucas) Drawer Storage Cabinet with contents (Cincinnati) Drawer Storage Cabinet with contents (Cincinnati) Drawer Storage Cabinet, empty

3 Drawer Storage Cabinet, empty Drawer Storage Cabinet, empty Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents (Cincinnati Bickford Radial Drill) Drawer Storage Cabinet with contents (Cincinnati Bickford Radial Drill) Drawer Storage Cabinet, misc. tools Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet with contents Drawer Storage Cabinet, empty Drawer Storage Cabinet with contents (Lodge & Shipley) Drawer Storage Cabinet with contents, misc. tools Drawer Storage Cabinet with contents (Lodge & Shipley) Door Storage Cabinet with contents; Lucas Boring bars and misc. tooling Door Storage Cabinet, Dean Smith & Grace tooling Door Storage Cabinet, Axelson tooling Door Storage Cabinet, Dean Smith & Grace tooling Door Storage Cabinet, empty Door Storage Cabinet, empty

4 Door Storage Cabinet, empty Door Storage Cabinet, empty 2065 Cabinet for 45 Deg. Tool Holders 2066 Sunar Cabinet: 2 doors, 5 shelves, with contents HP PEERLESS PEDESTAL GRINDER 2068 Baldor Model 1217W Double End Pedestal Grinder, 12" max. grinding wheel dia., 2" max. grinding wheel width, 1800 rpm grinding wheel speed, 2 hp, 115/230V / 1P / 60Hz / 20/10A, 4 poles, Spec. No.: G12-119B-0002, wt: 253 lbs., 1.25" shaft dia., S/N X BALDOR PEDESTAL GRINDER, 1.5 HP, FRAME 528M 2070 BALDOR PEDESTAL GRINDER, 2 HP, FRAME 0628M 2071 Dayton 6" Double End Pedestal Grinder, 6" max. grinding wheel dia., 3/4" max. grinding wheel width, 1/2" arbor hole, 3450 rpm grinding wheel speed, 1/4 hp, 120/240V / 1P / 60Hz / 3.0/1.5A, 16-1/2" wheels center to center, S/N Double End Pedestal Grinder 2073 STANDARD ELECTRICAL TOOL CO., TWIN WHEEL GRINDER, 10" WHEEL SIZE 2073A Ingersoll Rand Handheld Grinder 2074 Large Pallet: Norton Grinding Stones, all are in boxes, 4/3 x 1-1/2" x 1-1/4", 32A46-M8VBE, ME Lot of Large Mount Up Troli Grinding Wheels, 30" x 3" x 12" 2076 Lot of Grinding Wheel Segments 2077 Cincinnati Tool and Cutter Grinder, rebuilt 1997, 10" swing over table, 6" x 36" table, 16" table long. travel, 10" cross travel, 180 deg. table swivel, 10.5" grinding wheel spindle vert. travel, 13.5" max. spindle to table, ±15 deg. spindle tilt from center, 360 deg. grinding wheel spindle swivel,...[more] 2077A Lot of Assorted Grinding Wheels, Wheel Balancer, and Accessories for Tool and Cutter Grinder (2 Racks) 2078 Oliver Drill Bit Grinder, 1/2" - 3" dia. cap. (2 and 3 flute R.H. drills), 1/2" - 2-3/4" dia. cap. (3 flute drill head in split bushings), 28" max. drill bit length, deg. grind angle point, 9" x 2" x 5" grinding wheel, 1800 rpm motor speed, 2 hp (230V/3P/60Hz/6.2A) grinding wheel motor, whe...[more] 2079 Cincinnati Model DE Universal Cylindrical Grinder, new 1970, 18 swing, 48 centers, 1745 rpm grinding wheel speed, 7.5 hp grinding wheel motor, 14 x 1.5 grinding wheel, lower swivel 90 deg., upper swivel 30 deg., rpm work head speeds, 2.2 hp work head motor, work head swivel 90 deg., 11...[more]

5 " x 36" Norton Plain Cylindrical Grinder, new 1952, 24 swing, 36 centers, 30 x 2 x 12 grinding wheel, 15 hp grinding wheel motor, jaw work head chuck, S/N " x 72" Heavy Duty Cincinnati Plain Cylindrical Grinder, new 1995, 17" swing, 72" centers, 36" x 3" grinding wheel, 20 hp grinding wheel motor, 120 ipm hyd. table travel, 5 hp workhead motor, 15" 4-jaw chuck, tailstock, work rests, coolant system, hyd. system, extra heavy duty table and spindle d...[more] " x 63" Studer Model S40-2 Cylindrical Grinder, 17-1/2" max. grinding dia., 63" centers, 5-1/2" x 64" table work surface, rpm workhead speed, 1150 rpm grinding wheel speed, 360 deg. work headstock swivel, #5 Morse work headstock taper, #3 Morse tailstock taper, 20" x 3.1/4" x 8" grinding...[more] 2086 Cincinnati Centerless Grinder, 0.5" - 6" dia., cap., 24" x 10" x 12" bore grinding wheel, 25 hp grinding wheel motor, 14" x 10" x 5" bore regulating wheel, rpm regulating wheel speed, 1.5 hp regulating wheel motor, hydraulic wheel dressers (both heads), reversing switch on regulating wheel...[more] " x 20" Chevalier Surface Grinder, 10 x 20 table, 9-7/8 x 19-3/4 std. mag. chuck, 21 table surface to spindle, 22-7/8 table long. travel, fpm table speed, 10 table cross travel, 12 fpm table cross travel rapid, auto transverse inc., ipr cross travel handwheel...[more] " x 30" Summit Reciprocating Table Surface Grinder with Power Downfeed, 10" x 29.5" EM table, Ø12" x 2" grinding wheel, oad (approx.): 55" x 84" x 94" high, S/N " x 36" Norton Model S-1 Reciprocating Table Surface Grinder, 16.5" x 37" table (electro-magnetic chuck), 12" grinding wheel, 7.5 hp spindle motor, 40" table long. travel, 13.25" auto cross travel, fpm hyd. table feed, ipm aut cross feed, 18" vert. wheel head travel, auto overhead...[more] " x 24" Thompson Model 2F Reciprocating Table Surface Grinder, 8" x 24" electromagnetic chuck table, 12" x 1" x 3" grinding wheel, 54 rpm grinding wheel speed, 3 hp spindle motor, 12.5" height under new wheel, 9" wheel head cross travel, 29" table travel, 5-75 fpm (var.) table speed, 1.5 hp hyd....[more] 2091 Harig Model 618W Reciprocating Table Surface Grinder, 6" x 18" electromagnetic chuck table, 20" long. travel, 6-3/4" cross travel, 11-3/4" height under 7" wheel, 7" x 1/2" x 1-1/4" grinding wheel, " elev. handwheel graduations, 0.001" cross feed handwheel graduations, 3450 rpm spindle speeds,...[more] 2092 Reid Model 618V Reciprocating Table Surface Grinder, 8" x 51" table, 6" x 18" (EM chuck) cap., 14-3/4" max. grinding height, fpm (var.) table speed, 1.25 hp spindle motor, 15-1/4" spindle center to table, 7" grinding wheel dia., long. and cross feeds, oad (approx.): 48" x 52" x 73" high, wt:...[more] 2093 Van Norman Model 444 Rotary Surface Grinder, 12" chuck, 8" height cap., 8" under wheel, S/N LMEU1066MC Yoshikawa Model YGS-16 Rotary Surface Grinder, 16" dia. mag. chuck, 7.87" spindle trvl, 10" dia. grinding wheel, 10.5" under wheel, 1500 rpm spindle speed, 5 hp spindle motor, rpm table speeds, 1 hp table motor, wt (approx.): 3500 lbs., S/N 7741 Note: Specifications subject to verification 2095 Dumore #5 Portable Electric Grinder, in metal travel case 2096 DAYTON PORTABLE DUST COLLECTOR 2097 TORIT Dust Collector

6 2098 TORIT Dust Collector Filters, Assorted Models & Sizes 2099 TORIT Dust Collector Filters, Assorted Models & Sizes 2100 TORIT Dust Collector Filters, Assorted Models & Sizes Gallon Monlan (PRAB) Model DF1500 Drum Type Coolant System with Paper Filtration System, 2000 gal. cap., 10 hp (Brinkman) pump, 400 gpm flow rate, 39" drum dia., 59" paper width, 8" inlet dia., OAD (approx.): 124" x 112" x 93" high, S/N NA 2102 Metpro Duall High Volume Vertical Packed Tower Design Wet Air Scrubber with Model NH-44 Blower Fan, new 2008, vertical packed tower wet air scrubber type, Metpro Duall model NH-44 blower fan (6500 cfm, sp. 7.0, hp, 2122 rpm, S/N 4910, Yr. 2008), Note: no other specifications for this system at...[more] " x 96" Magnetic Table (Chuck) for Surface Grinder, electromagnetic chuck, 20" x 96" x 5" thick table, S/N NA 2104 Brown & Sharpe Magnetic Chuck 2105 Magnetic Chuck 36-3/4" L x 11" W, on rolling base, D290, 110V, 220 V; by LW Chuck Co-Toledo 2106 SPEEDWAY AIR COMPRESSOR, TANK MOUNTED, PORTABLE, SINGLE PHASE 2107 SPEEDAIRE AIR COMPRESSOR, TANK MOUNTED, PORTABLE, 2 HP, SINGLE PHASE 2108 Gardner-Denver Electra-Saver II 20 HP Rotary Screw Air Compressor, new 2008, 20 hp motor, 125 psi oper. pressure, 85 cfm output, oad (approx.): 65" x 42" x 37" high, S/N SULLIVAN-PALATEK MODEL 150UD AIR COMPRESSOR WITH AIR DRYER, 150 hp, 125 psi max, 705 ACFM cap., 208V/3P/60Hz, 407.1(19.1) amps, 150-(1)5.0 hp, S/N , with Great Lakes Model GRF-800AN4-236 Air Dryer (150 psi, S/N Receiver Tank for Air Compressor, Abbott-England, Code EN286-1, S/N A Hankison Air Dryer Model HIT 25, S/N Kearney & Trecker Milwaukee Model 205 S-12 Horizontal Universal Milling Machine, U.S. Government Surplus, new 1977, 12" x 56" table, 3 T-slots, 28" table long. trvl, 10" table cross trvl, 18" knee vert. trvl, 24 spindle speeds, rpm, 5 hp, No. 50 spindle taper, 16 long. and cross feeds...[more] 2115 Cincinnati Milacron Model Plain Dial Type Horizontal Milling Machine, 16" x 72" table, 24 spindle speeds, rpm, 15 hp, #50 NS spindle taper, 34" table long. travel, 12" cross travel, 20" knee vert. travel, 0" - 20" spindle to table, 32 table long. feeds, 3/8-90 ipm, 32 cross feeds,...[more] 2116 Kearney & Trecker Model 425TF Plain Horizontal Milling Machine, new 1957, 88" x 17" table, 42" table long. travel, 14 table cross travel, 18 table vert. travel, 24 spindle speeds, 13 to 1300 rpm, 25 hp, No. 50 taper, 32 feeds, 3/8 to 90 ipm, 150 ipm rapid, twin elevating screws, double overar...[more] 2118 Heckert Model FU450 X 1800 APUG Universal Milling Machine, new 1980, 17.7" x 70.8" table, 3300 lbs. load cap., 45 deg. (L-R) table swivel, 52" table long. travel, 13.5" table cross travel, 24-3/4" knee vert. travel, 18 spindle speeds, rpm, 20 hp, ISO 50 taper, 5/8" /8" spindle center...[more]

7 2119 Cincinnati Model Vercipower Vertical Milling Machine, 20" x 94.5" table, 3 T-slots (13/16" on 4.25" ctrs), 24 spindle speeds, rpm, 50 hp, No. 50 taper, 5-1/6" and 8-23/32" nose dia., 50" table long. travel, 18" table cross travel, 24" headstock vert. travel, 32 long. feeds, 3/8-9...[more] 2120 Cincinnati Vercipower Vertical Milling Machine, 18" x 72" table, 24 spindle speeds, rpm, 20 hp, No. 50 spindle taper, 5-1/6" and 8-23/32" nose dia., 34" table long. travel, 12" table cross travel, 22" headstock vert. travel, 32 long. feeds, 3/8-90 ipm, 32 cross feeds, 3/8-90 ipm, 3/16...[more] " Yuasa Dividing Head, Stock Cushman Dividing Head with 8-1/4" Chuck, 2-1/2 thru hole, S/N D; with tailstock 2123 Dividing Heads 8" dia, OAL 19" " CARROLL MANUAL DIVIDING HEAD WITH " CHUCK 2125 BURR King Vibra King 45 Deburrer, 4.5 cu. ft. cap., 1.5 hp motor, wet/dry oper., replaceable drain, S/N NA /2" DeVlieg Model 2B-36 Jig Mill, 2-1/2" spindle, #40 taper, 24" x 36" table, 36" table long. travel, 12" table retraction, 24" vert. spindle travel, 12" horiz. spindle travel, 16 spindle speeds, rpm, 16 bar feeds, ipr, 16 milling feeds, ipm, ipm rapid t...[more] /2" DeVlieg Model 2B-36 Jig Mill, new 1969, 2-1/2" spindle, #40 taper, 24" x 36" table, 36" table long. travel, 12" table retraction, 24" vert. spindle travel, 12" horiz. spindle travel, 16 spindle speeds, rpm, 16 bar feeds, ipr, 16 milling feeds, ipm, [more] 2128 Bridgeport EZ TRAK Series I CNC Vertical Milling Machine, 9" x 48" table, 36" table long. travel, 12" cross travel, 16" knee vert. travel, 5" spindle quill travel, rpm spindle speeds, 2 hp, R-8 taper, 1.875" spindle dia., 3.375" quill dia., / / ipr spindle feeds, ± 45 de...[more] 2129 Bridgeport EZ Trak Series I CNC Vertical Milling Machine, 9" x 48" table, 36" table long. travel, 12" table cross travel, 16" knee vert. travel, 5" spindle quill travel, rpm, 2 hp, R-8 spindle taper, 1.875" spindle dia., 3.375" quill dia., / / ipr spindle feed rates, ±...[more] 2130 Bridgeport "J" Head, S/N J Bridgeport Mill Head 2132 Bridgeport Shaping Attachment, S/N E-1263T 2133 Bridgeport Shaping Attachment, S/N E Bridgeport 12" Rotary Table, S/N Bridgeport 15" Rotary Table, S/N " T-Slotted Rotary Table, Index Machine Tools

8 " Cushman Index Table, 3 Jaws, 4" Thru Hole S/N Rusnok Milling Head 2141 Kearney & Trecker Double Angle Universal Head with 50 Taper 2142 Lot of (2): Ridgid Threading Heads 2143 Lot of 3: Mill Tailstocks 2144 Acu-Rite Digital Read-Out 200S/300S; New in Box " Giddings & Lewis Model VTC48 CNC Vertical Turning Center, 48" table (4-jaw chuck), 60" swing, 12" 72 under rail, 64" under tool holder, 60" rail vert. travel, 60" rail cross travel, 2 table speed ranges, rpm, 60 hp, 50" ram travel, No. 60 ram taper, 8" x 8" ram, ipm feeds...[more] 2146 Cold Shot Chiller, Model ACWC-120EM, S/N M , 460V/3P 2147 Kanto Seiki Model MPSB-07-N Automatic Oil Temperature Regulation Unit (Oil Chiller), Model designations (MPSB-07-N): M: oilmatic, P: high precision, S: with tank, 07: chiller capacity (7.5/0.75 kw), N: R-407C refrigerant (950g) Applications: machining centers, CNC lathes, EDM machines, CNC grinders...[more] 2148 Kanto Seiki Model MPSB-07-N Automatic Oil Temperature Regulation Unit (Oil Chiller), Model designations (MPSB-07-N): M: oilmatic, P: high precision, S: with tank, 07: chiller capacity (7.5/0.75 kw), N: R-407C refrigerant (950g) Applications: machining centers, CNC lathes, EDM machines, CNC grinders...[more] 2149 Kanto Seiki Model MPSB-07-N Automatic Oil Temperature Regulation Unit (Oil Chiller), Model designations (MPSB-07-N): M: oilmatic, P: high precision, S: with tank, 07: chiller capacity (7.5/0.75 kw), N: R-407C refrigerant (950g) Applications: machining centers, CNC lathes, EDM machines, CNC grinders...[more] 2150 Turmoil Model OC-150 IL-ATC In Line Oil Chiller, 18,000 btu/hr cooling cap., 4.5 gpm min. flow, 1-1/2 hp motor, 460V/3P/60Hz, oad (approx.): 31" x 30" x 38" high, S/N Lb. IRD Model B50-5V Balancing Machine with End Support, 5000 lbs. cap., 5 hp motor, 80" bed length, 94" max. rotor dia., 13" max. journal dia., belt drive, test bars, Note: needs control unit, oad (approx.): 111" x 58" x 60" high, S/N G Knuth Model SK2 Sand Blast Cabinet, 37" x 23.5" x 13" (front / 22" (rear) int. dim., 22.5" x 10.5" viewing window, top/side loading, dual side doors, operator gloves, blast gun, dust catcher, work lght, foot pedal, oad (approx.): 45" x 42" x 72" high, S/N NA 2153 Cyclone Model 3624 Top Loading Blast Cabinet, 35-1/2" x 23-1/2" int. dim., 13-1/4" height at front, 22-1/4" height at back, top loading locking door (spring loaded), side loading/access door (locking), viewing window, interior light, air vents, suction hose, Cyclone DC1500 dust collection system, du...[more] 2154 A-BEC Model PDH-4848 Blast Cabinet with A-Bec Model ADC-1210 Dust Collection Unit, new 2009, 48" x 48" x 46" high int. dim., 36" max. ht. over turn table, 30" dia. turn table with roller infeed, 7" x 21" viewing window, pressure pot, dual full opening side loading doors, 1000 lb. capacity roller inf...[more]

9 " Rolap Model 36 Lapping Machine, new 2006, 3 conditioning rings, 14-1/2 inside dia., 36 lapping plate dia., 30 rpm, 5 hp motor, double V-belt transmission, Rolap recirculation system blender pump, 0 60 min. timer, oad (approx.): 56 x 76 x 52 high, wt (approx.): 2000 lbs., S/N ROL [more] " Rolap Model C L ROL 28 Lapping Machine, new 2008, 3 conditioning rings, 11-3/8 inside dia., 28 lapping plate dia., 3 hp high performance motor, Rolap recirculation system blender pump, 0 60 min. timer, oad (approx.): 60" x 50" x 56" high, S/N ROL New, Vanguard Model V610-3 Lapping Machine, new 2019 (never used), 9.4" max. working dia., 1/16" min. workpiece thickness, 25" work table plate dia., 60 rpm table plate speed, 2 hp motor, " parallelism accuracy, ± " thickness tolerance, oad (approx.): 37.4" x 33.5" x 90.5" high, wt (app...[more] 2158 New, Vanguard Model V610-3 Lapping Machine, new 2019 (never used), 9.4" max. working dia., 1/16" min. workpiece thickness, 25" work table plate dia., 60 rpm table plate speed, 2 hp motor, " parallelism accuracy, ± " thickness tolerance, oad (approx.): 37.4" x 33.5" x 90.5" high, wt (app...[more] 2159 Engis Hyprez Model 24LM230VP Lapping Machine, 24" lapping plate dia., rpm (var.) plate rotation speed, 11.25" O.D. serrated conditioning ring, 9.75" I.D. serrated conditioning ring, 3 ring stations, lbs. pneumatic down force, 3 hp motor, 60 psi air req., Engis controls, spare parts a...[more] " x 40" VDF Boehringer Model V5 Engine Lathe, 28" swing over bed, 39.3" centers, 18 spindle speeds, rpm, 10 hp, 4.75" spindle bore, Acu-Rite 2-axis DRO, 24" 4-jaw chuck, tailstock, 4-way tool post, oad (approx.): 169" x 76" x 85" high, S/N " x 96" Monarch Model 62 Engine Lathe, 18 swing over cross slide, 15 4 jaw chuck, rpm, per revolution, TPI, 20 HP, thread dial, steady rest, oad (approx.): 224" x 67" x 60" high, S/N AT " x 72" Axelson Model 20 Engine Lathe, swing, 20 over cross slide, 72 centers, rpm, 20 hp, 1.5 spindle bore, 54 feeds, ipr, 54 threads, tpi, tailstock, taper attach., chip pan bed, oad (approx.): 176" x 60" x 61" high, S/N "/17" x 96" American Pacemaker Style E Engine Lathe, new 1966, 27" swing, 17" over cross slide, 96" centers, 18 spindle speeds, rpm, 2.5" spindle bore, 6" top slide cross feed travel, 60 carriage long. feeds, ipr, 60 threads, 1-60 tpi, 18" 4-jaw chuck, 7" I.D. steady re...[more] " x 68" LeBlond "The Machine" Engine Lathe, 26" swing, 18" over cross slide, 68" centers, 24 spindle speeds, rpm, 2-1/8" spindle bore, ipr feeds, tpi threads, 18" 4-jaw chuck, taper attach., tailstock, coolant, rapids, oad (approx.): 160" x 60" x 71" high, S/N HSL...[more] x 40 Zhejiang Model CK6150A Flat Bed CNC Lathe with GSK 928TEa CNC Control, new 2014, 26 swing, 18 over cross slide, 40 centers, rpm, 10 hp, 3.5 spindle bore, D1-8 camlock spindle nose, GSK 928Tea CNC control, 4-pos. power turret, 12 3-jaw chuck, tailstock, metered lube, coolant,...[more] 2165A 24" x 80" Victor Model 2480T Engine Lathe, 23.6" swing over bed, 15" over cross slide, 32.25" in gap, 80" centers, rpm, 20 hp, 4.13" spindle bore, D1-11 nose, inch/metric threading, 20" 4-jaw chuck, taper attach., steady rest, Aloris tool post, 2-speed tailstock, thread dial, chuck guard,...[more] " x 59" VDF - Heidenreich & Harbeck Model V630 X 1500 Engine Lathe, new 1973, 24.8" swing, 13.3" over cross slide, 59" centers, rpm spindle speeds, 20 hp, 3.97" spindle bore, 2-axis DRO, 6-jaw chuck, chuck guard, tailstock, steady rest, compound slide, Multifix steel holder (size C) w...[more] " x 80" TOS Model SN 50 C Engine Lathe, 19.6" swing, 10.6" over cross slide, 80" centers, 13.4" bed width, 24 spindle speeds, rpm, 8 hp, 2-1/4" spindle bore, 12" cross travel, ipr long. feeds, ipr cross feeds, inch/metric threading, 12" 4-jaw chuck, tailst...[more]

10 " x 78" American Style B Engine Lathe, new 1963, 18" swing, 11" over cross slide, 78" centers, rpm spindle speeds, 15 hp, 5 MT taper, 2-1/16" spindle bore, 66 inch feeds, ipr, 66 inch threads, tpi, 66 metric feeds, mm/rev, 66 metric threads, mm...[more] " x 43" Kingston Model HJ-1100 Engine Lathe, new 1997, 17" swing, 10-9/16" over cross slide, 24" in gap, 5-7/8" gap length, 43-1/2" centers, 12 spindle speeds, rpm, 7.5 hp, 2-1/4" spindle bore, No. 6 MT taper, D-1-6 nose, 16 long. feeds, ipr, 16 cross feeds, [more] " x 78" American Pacemaker Engine Lathe, 16" swing, 78" centers, rpm spindle speeds, 10 hp, 1.75" spindle bore, 15" bed width, cross slide, tailstock, Note: no chuck, S/N " x 60" Birmingham Model YCL-1660 Gap Bed Engine Lathe, new 2006, 16.1" swing, 8.8" over cross slide, 25.1" in gap, 9.5" gap length, 60" centers, 11.8" bed width, 12 spindle speeds, rpm7.5 hp, 2.28" spindle bore, D1-6 camlock spindle nose, inch/metric threading, 2.3" tailstock quill dia....[more] 2172 Kingston Complete Taper Attachment Assembly with Taper Clamp, for HR series lathes, UNUSED " Pratt & Burnerd 4-Jaw Chuck, Catalog , S/N E " Skinner Horton 4-Jaw Chuck, 1 pc jaw, 5" thru hole, S/N D08C " 3 Jaw Chuck with serrated jaws, 7" thick " Cushman 3-Jaw Extra Heavy Duty Forged Steel Chuck with 12.5" Thru-Hole, 28" dia., 3 jaws (2 piece), 12.5" thru-hole, A2-20 spindle mount, power wrench compatible, S/N A-9-E " 4-Jaw Bison Chuck, 2 pc jaws, 9-1/2" thru hole, Flat Back " CUSHMAN 4-JAW CHUCK, 5" THRU-HOLE, 2 PIECE JAWS, S/N " Cushman 4-Jaw Heavy Duty Power Wrench Combination Chuck with 8-1/8" Hole, 24" dia., 4-jaws, combination scroll / independent type, A2-15 mount, 8-1/8" hole, A2-11 / A2-15 adapter, power wrench, S/N NA " 4-Jaw Chuck, 5" Thru Hole, 5" deep, with OAD 7" to threaded base /2" Adapter Plate with 9" thru-hole, A-15 to A-20 mount " Adapter Plate, 4" thru hole, L Mount " Adapter Plate, 4" thru hole, L Mount " SCHUNK MODEL ROTA TB PNEUMATIC STEEL CHUCK, WITH ADAPTER PLATES " 3 Jaw Cushman Chuck, 2 pc jaws,4" thru hole, Cam Lock, no top jaws " 4 Jaw Cushman Chuck, 1 pc jaws, 4" thru hole, custom jaws.

11 " 3 Jaw Chuck, 2 pc jaws, 7-1/2" thru hole " 4 Jaw Chuck, 1 pc jaws, 5" thru hole, with heavy duty adapter plate " Adapter Plate, 3" thru hole, L Mount " Cushman 3 Jaw Chuck, 1 pc jaws, 5" thru hole, flat back, S/N A11C " Cushman 3-Jaw Chuck, 2 pc jaws, 5" thru hole, Flat Back, S/N A " Cushman 3-Jaw Chuck, 2 pc. Jaw, 5" thru hole, S/N A11C " Cushman 3-Jaw Chuck, 2 pc. Jaw, 5" thru hole, S/N N/A " 4-Jaw Cushman Chuck, 1 pc jaws, 4" thru hole, S/N D06D " Cushman 4 Jaw Chuck, 1 pc jaws, 5-1/4" thru hole, flat back, S/N A208A " 4 Jaw Chuck, 4" thru hole, threaded spindle " 4 Jaw Chuck, 4" thru hole, threaded spindle, E R " 4-Jaw Chuck, 2 pc. jaws, 4" thru hole, threaded spindle " 3 Jaw Chuck, 2 pc jaws, 5" thru hole " 3 Jaw Bison Chuck, 2 pc jaws, 5" thru hole, w/adapter 8" diameter " 3-Jaw Chuck, 2 pc jaws, 4" thru hole, has adapter 10" dia x 6", no top jaws " Cushman 3 Jaw Chuck, 2 pc jaws, 3-1/4" thru hole, S/N A11A " 3 Jaw Chuck, 2 pc jaws, 3-1/4" thru hole, threaded spindle " 3 Jaw Chuck, Serrated Jaws, 4" thru hole " 4 Jaw Cushman Chuck, 2 pc Jaws, Cam Lock, D06C " 4 Jaw Horton Skinner Chuck, 1 pc Jaw, 3" thru hole, L Mount " Bergmans 4-Jaw Chuck, 1 pc. Jaws, 3-1/2" thru hole with 5" threaded spindle " 4 Jaw Chuck, 1 pc jaws, 3" thru hole, Cam Lock

12 " Chuck, 3 Jaw Serrated, 5-1/2" thru hold " Adapter Plate, 4" thru hole, threaded spindle " Adapter Plate, 4-5" cone, 2-1/2" thick " 2-Jaw Chuck with Adapter, flat back, 6 bolt back " Cushman 3 Jaw Chuck, 2 pc jaws, 3" thru hole, threaded spindle, S/N L02A " Cushman 3 Jaw Chuck, 2 pc jaws, 4-1/2" thru hole, S/N B /2" 3-JAW CHUCK, 4" THRU-HOLE, D-8 CAM LOCK, 2 PIECE JAWS /4" 3-Jaw Chuck with 4" thru-hole, 1 piece jaws, camlock, D-9 mount " 3 Jaw Chuck, 1 pc jaws, 4" thru hole, Flat Back /2" 3 Jaw Chuck, 2 pc jaws, 4" thru hole, flat back " 3 Jaw Cushman Chuck, 2 pc jaws, 3" thru hole " 3 Jaw Cushman Chuck, 2 pc jaws, 3" thru hole, S/N D06A " 3 Jaw Pratt-Burnard Chuck, 4" thru hole, Cam lock, Cat # " 3-Jaw Chuck with 4" Thru-Hole, 2-piece jaws, adapter, camlock, S/N NA " 4 Jaw Chuck, 2 pc jaws, 3" thru hole, with 14" spindle adapter " Cushman 4 Jaw Chuck, 1 pc. Jaws, 3" thru hole, flat back, SN 12214CD /2" Bison 4 Jaw Chuck, 1 pc jaw, 3" thru hole, flat back " BUCK 4-JAW CHUCK, 3-1/2" THRU-HOLE, A-8 MOUNT " 4-JAW CHUCK, 3" THRU-HOLE, L-1 MOUNT " BUCK 6-JAW CHUCK, SET TRU, 4" THRU-HOLE, A-8 MOUNT, 2 PIECE JAWS " Adapter Plate, 2-1/2" thru hole, Cam Lock " Adapter Plate, 5" thru hole, Cam Lock

13 " 4-Jaw Chuck with 3" Thru-Hole, 1-piece jaws, camlock, D-5 mount, S/N NA /2" Chuck 3 Jaw, 2 pc jaws, 3-1/2" thru hole, flat back, with fixture " Cushman 3 Jaw Chuck, 2 pc jaws, 2" thru hole, flat back, S/N D06B " Bison Chuck, 2 pc jaw, 3" thru hole, Cam Lock " 3-Jaw Hydraulic Chuck, 2-1/4" threaded back, serrated jaws " 3 Jaw Chuck, 2 pc jaws, 3" thru hole, threaded back " 3 Jaw Cushman Chuck, 2 pc jaw, 2" thru hole " 4 Jaw Bison Chuck, 2 pc jaws, 3" thru hole, flat back " 4 Jaw Chuck, 1 pc jaws, 2-1/2" thru hole, flat back " 4 Jaw Chuck, 2 pc jaws, 3" thru hole, Cam Lock " Adapter Plate, 1-1/2" thru hole, Cam Lock " Adapter Plate, 2-1/2" thru hole, Cam Lock " Adapter Plate, 2-1/2" thru hole, Cam Lock /2" Buffalo 3 Jaw Chuck, 2 pc. Jaws, 3" thru hole, 4" back " Bison 3 Jaw Chuck, 1 pc jaws, 2-1/2" thru hole, flat back, Has space for 6 jaws /2" Cushman 3 Jaw Chuck, 2 pc. Jaws, 2-1/2" thru hole, S/N E R-9Chuck " Bison 4-Jaw Chuck, 1 pc jaws, 2" thru hole with adapter plate " CAS 4-Jaw Chuck, 1 pc. Jaws, 2" thru hole, Cam Lock " Adapter Plate, 2" thru hole, Cam Lock " 3 Jaw Buck Chuck, 2 pc jaws, 1-1/2" thru hole, w/cam Lock adapter " 3 Jaw Chuck, 2 pc jaws, 1-1/2" thru hole " 3-Jaw Chuck, 2 pc jaws, 1-1/2" thru hole, Cam Lock

14 2256 Lot: (3) 6" 3-jaw Chuck, 1 pc. Jaws, 1" Thru Hole, and (1) Steady Rest " 3 Jaw Bison Chuck, 2 pc jaws, 1" thru hole, Flat Back " 3-Jaw Pratt-Burnerd Chuck, 1 pc jaws, 1" thru hole, Flat Back, S/N Cincinnati Hydraulic Chuck (in crate) with tailstock 2260 NEW, 12-1/2" 4-Jaw Independent Chuck with 3-3/4" Thru-Hole, S/N NA 2261 NEW, 21" 4-JAW CUSHMAN CHUCK, A-15 MOUNT, 6-1/4" HOLE, 2 PIECE JAWS 2262 NEW, 21" CUSHMAN 4-JAW CHUCK, A-15 MOUNT, 6-1/4" HOLE, 2 PIECE JAWS 2263 NEW, ADAPTER PLATE, 20" DIAMETER, 11" THRU-HOLE, 3" THICK, 3/4" LIP 2264 NEW, ADAPTER PLATE, 20" DIAMETER, 11" THRU-HOLE, 3" THICK, 3/4" LIP 2265 NEW, ADAPTER PLATE, 20" DIAMETER, 11" THRU-HOLE, 3" THICK, 3/4" LIP 2266 SET OF FOUR FACE PLATE JAWS 2267 SET OF FOUR, FACE PLATE JAWS, 8-1/2" LONG: 6-1/4" ON CENTER, 2 BOLTS Lot: Chuck Jaws 2269 Lot: Chuck Jaws 2270 Lot: Chuck Wrenches 2271 Lot: Heavy Duty Chuck Jaws 2271A Safety Chuck Cover 2272 REM (Recycling Equipment Manufacturing, Inc.) Model MS-10 Magnetic Separator Conveyor, 24" belt width, 120" chute length, 36" loading height, 80" discharge height, all steel unitized slider bed construction, PVC-150 conveyor belting with 1-1/2" vulcanized cleats and Flexco 125 megalloy lacing, 8" di...[more] 2273 Schmidt Model Hydraulic Roll Marking Machine, ,000 lbs. ram pressure, 1/2" ram stroke, 3/8" - 7" adj. die stroke, 10" die space height, 3-1/2" throat, 10" x 6" table, control station, dual hand control buttons, manual hand crank for table adj., 3 modes of operation (roll marking, press...[more] 2274 TRANSFER CAR, 25' LONG X 6' WIDE X 2' HIGH " x 60" x 26" High Custom Steel Frame Transfer Cart on Casters, 96" length, 60" width, 26" height, 20,000 lbs. load cap., 10" swivel casters, S/N NA

15 ' LONG X 84" WIDE X 16,000 LB. CAPACITY DOCK AND CONTAINER RAMP 2277 Nibbler Fabriks Model Faximil 6CCN 1000 Nibbler, spm (inf. var.), adj stroke length: 2, 4, 6, 8 mm, 1330 mm projection, 1.5 kw motor, foot switch for single stroke punching, punching tool cuts up to 6 mm, beading tool up to 4 mm, gills up to 3 mm, nibbling up to 6 mm, edging tools up to 3...[more] 2277A 70 Ton Geka-Hydracrop Model HYD-70 Ironworker, 70 tons cap., 5" x 5" x 1/2" angle cut-off at 90 deg., 18" x 5/8" flat, 1-3/4" round, 1-3/4" square, 1-1/8" x 3/4" punch, 3" punch stroke, 20" punch throat, 48 spm at 3/4" travel, Capacity with special blades: 6" x 6" x 1/2" angle cut-off at 90 deg., 5...[more] 2278 Contech Model UP2028 Shuttle Bed Die Cutting Press With Hydraulic Unit, 20" x 28" platen (die cutting area), 22" x 30" max. die board size, 7-50 tons range, 10" upper platen stroke (no heat platen), 7-1/2" max. press opening (with upper heat platen), 5-1/2" max. press opening (with upper and lower...[more] TON POWER TEAM H-FRAME HYDRAULIC PRESS MODEL PQ120 SERIES, 3 Ph 3 HP 230/ TON ENERPAC MODEL IPHO10S10-1 HYDRAULIC PRESS 2281 Enerpac Double Cylinder Hydraulic Press 2282 Anvil Press # Manual Press Ton Rodgers Model 2A MV-GV-RC1-TL4 Wheel Press, 200 tons cap., 12" - 120" daylight (ram retracted), 10" yoke dia., 3.25" ram dia., 10" ram stroke, S/N D2A ' x 16 Ga. Tennsmith Hand Operated Bending Roll, new 1985, 16 ga. (mild steel), 49" max. length, 3" dia. rolls, 1-1/2" min. forming radius, 3/8, 1/2", & 5/8 wire grooves, 4:1 gearing ratio, turned, grooved and polished rolls, wide clearance top roll latch, wire grooves & three full-length...[more] ' x 12 Ga. Dreis & Krump Model BPU Box & Pan Brake, new 1972, 72" x 12 ga. (mild steel), 72" x 16 ga. (ss), 17 fingers: (3) 3" / (3) 4" / (7) 5" / (1) 6", oad (approx.): 117" x 53" x 60" high, wt (approx.): 2,670 lbs., S/N Savage 30 HP Model WJS-20 Wet Type Abrasive Cut-Off Saw, new 1998, 18" blade dia., 1600 rpm spindle speed, 30 hp, 52" blade gantry travel, 36" x 24" table, 27" table travel, coolant tank, pump and piping, oper. panel with motor load meter, manual and auto modes, oper. manual and drawings, machine or...[more] 2288 Savage 30 HP Model WJS-20 Wet Type Abrasive Cut-Off Saw, new 1998, 18" blade dia., 1600 rpm spindle speed, 30 hp, 52" blade gantry travel, 36" x 24" table, 27" table travel, coolant tank, pump and piping, oper. panel with motor load meter, manual and auto modes, oper. manual and drawings, machine o...[more] " x 14" Horizontal Mitering Bandsaw, new 2007, 8" x 14" cutting cap., 5-1/2" x 6" angular cutting cap., 86, 128, 175, 244 fpm blade speeds, 1" x 0.035" x 107" blade, 120V/60Hz/18A power, S/N Roll-In Model EF1459 Vertical Bandsaw, new 2000, 14-1/2" under guides, 8-3/4" throat, 9" blade travel: into work piece, 3/4" x 10' x 0.035" blade (bi-metal), 70, 140, 270, 525 fpm blade speeds, 1 hp, 18-1/2" x 30" table, 30" table height, 1/4", 3/8", 1/2", 5/8" and 3/4" guide rollers for blades widt...[more]

16 2292 Ridgid 10" Dual Blade Table Top Saw 2293 Delta Unisaw Tilting Arbor Table Saw 2294 Holding Tank 2295 Yellow Bellied Sump Sucker Model 175 Air, 175 gal. cap., psi air supply, cfm intake rate, 5.3 cu. ft. sludge basket cap., 2" suction hose, 1.5" discharge hose, 2" drain holes, air venturi powered, 12" dia. leak-proof access door, tow package design, oad (approx.): 78" x 34" x 59...[more] K/30k Stella Maris Hydraulic Power Unit for Pressure Testing, new 2010, Hydraulic power unit designed to pressure test subsea connectors, valves and other components; 5K circuit: for flow testing up to 5000 psi, Includes (4) 4-way test valves and (6) 3-way test valves, LP 5000 psi maximum test pres...[more] 2298 Power Team Air Hydraulic Pump 2299 Multi-Stage Coolant Pump 2300 Gusher Pump Model MSC FJ-4, 10 HP, S/N Coolant / Liquid Pump 2302 A-Ryung Motor T-Rotor Pump 3 PH Induction Motor, S/N , HP: 2 (1.5 KW), 4 PH; HZ: 50/60; Volts: 200/220, Amps: 6.9/ Teel-Fasco Pump 2304 Little General Pump 2305 Submersibal Pump 2306 Lot of 3: Mitsubishi Split System Heat Pump, Model MXZ-3B 24 NA 2307 (2) Cyclodial Motors BWE Allen Bradly AC Servo Motor, Bulletin 1326 P/N , S/N 12389: Outpower: 7.5 KW, Max Speed: 3000 RPM 2309 Brook Crompton Motor Type WP-DF215TS-VX4, Frame: 215TDZ, Product # BC4N010-4DZ, HP: 10, RPM: 1750, HZ: 60, Volts: 230/460, Amps: 26.3/ Dayton Industrial Motor Model 1K065BA, HP: 1, PH: 1, RPM: 1725, Volts: 115/ , HZ: 60, AMPS: 13.4/6.8, FR: 56H 2311 Dumore Motor for Grinder: Model 62351J-G843, P/N: R , Type: PF, Rise: 55, HP: 1, RPM: 3450/2850, HZ: 60/50, PH: Dumore Motor for Grinder: Model 62351J-G843, P/N: R , Type: PF, Rise: 55, HP: 1, RPM: 3450/2850, HZ: 60/50, PH: 3

17 2313 General Electric Tri-Clad Induction Motor, Model: 5K324BK284B, S/N: DF , Type: K, Frame: 324Y, HP: 40, RPM: 1770, Volts: 230/460, CY: 60, 3 PH, Amps: / General Electric Tri-Clad Induction Motor, Model: 5K4444BZ2A1L, S/N EA233047, Type: K, HP: 75, RPM: 1775, Volts: /440, CY: 60, 3 PH, Amps: 190/ General Electric Tri-Clad Induction Motor, Model: 5K4445B21A1F2L, S/N FA243070, HP: 100, RPM: 1775, Volts: /440, PH: 3, CY: 60, Amps: 245/122.5, Type: K, FR: 445U 2316 Lift -Tech International Motor Type: ZFB100/4DF132L4X-12/2, S/N D ; KW: 3.7/15.0, Amps: 14.0/29.5, Volts: 460 PH 3, HZ 60, RPM: 850/ Lincoln Motor: Model EVDAAF4P15TC61L, Product # LM16246DC, HP: 15, RPM: 1770, KW: 11.2, HZ60, Volts 230/460 PH Lincoln Motor: Model FVEAAF4P20TC61L, Product # LM16249ED, HP: 20, RPM: 1765, KW: 14.9, HZ: 60, Volts: 230/460, PH: Louis Allis Co. Flexitorq DC Motor, Model , TY: BN1, HP: 300, Volts: 300, Rise: 60, Amps: 432, FR: D685A, RPM: Marathon Electric XR1 High Efficiency, Model LK256TTGN65318DL, Part #E506, S/N C /05-04, Type: TGS, HP: 20, RPM: 1775, HZ: 60, Volts: 230/460, KW: 14.9, 3 PH, NEW: 9/ Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA10KMBWNFC, S/N , Torque: 47.8 NM, 200V, 41.6 A, RPM: 2000, FR: 133, WT: 144 kgs, Toshiba Machine Co Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA370MBWNED, S/N , Torque: 17.7 NM, 200V,, 12.7 A, RPM: 2000, 133 HZ, WT 5.5 KG, Toshiba Machine Co Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA400MBWBFD, S/N , Torque: 19.1 NM, 200 V, 19.1 A, RPM: 2000, 133 HZ, Output: 4.0 KW, WT: 59 Kgs, Toshiba Machine Co Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA650MBWNEC, S/N , Torque: 31.4, Rate Rev: 2000, Inertin: 490, WT: 91 kgs, Toshiba Machine Co MS-Chalmers Mfg. Co, Ohio; S/N 816EZ-N , FR: D4, HP: 20, PH: 3, CY: 60, RPM: 1160, Volts: 220/440, mps: 51.6/ Pellizari Motor Model EC160M4, S/N , CV: 15, H: 1750, HZ: 60, Volts: 220/440, Amps: 39.2/ Reuland Motor Type HPGW-10, Product # 0020C-1KAL-0011, S/N A-1, HP: 2, RPM: 1800/164, HZ: 60, Volts: 220/440, Amps: 6.0/ US Motor Model G40115, ID #U04U F, FR: 182T, Type: UT, HP: 3, PH: 3, HZ: 60, RPM: 1750, Volts: 208/230/ HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA

18 HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA 2333 Heald Model H-17 Red Head Motor, 19.8 kw motor, 17,000 rpm, 350 V / 567 Hz / 51 A (3 phase - 4 poles), Unit# , Part# , S/N Heald Model H-60 Red Head Motor, 6 kw motor, 60,000 rpm, 350 V / 1000 Hz / 17.5 A (3 phase - 2 poles), Unit# , Part# , S/N Reconditioned, GE Model 752 1,000 HP DC Drilling Motor with 10 HP Blower Assembly, unit was being used as a test stand for AC synchronous generator manufacture / repair shop, S/N NA 2336 FOLLOW REST, 3" CAPACITY, 9-1/2" CENTER HEIGHT 2337 FOLLOW REST, 4" CAPACITY, 11" CENTER HEIGHT FOR: 20" SUMMIT 2338 FOLLOW REST, 5" CAPACITY, 9" CENTER HEIGHT FOR: 14" SUMMIT 2339 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2340 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2341 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2342 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2343 NEW, FOLLOW REST, 6" CAPACITY, 15" CENTER HEIGHT 2344 NEW, STEADY REST, 18" HOLE, 22" CENTER HEIGHT, 16" BASE 2345 NEW, STEADY REST, 20" HOLE, 20" CENTER HEIGHT, 16" BASE 2346 NEW, STEADY REST, 23" HOLE, 25" CENTER HEIGHT, 19" BASE 2347 NEW, STEADY REST, 5" HOLE, 9" CENTER HEIGHT, 11" BASE 2348 NEW, STEADY REST, 9" HOLE, 9" CENTER HEIGHT, 11" BASE 2349 Roller Rest; Bearing Type 12-1/2" Center, Lehmann 2350 Steady Rest: 17" Hole; 15" Center Height; 16" Base 2351 Steady Rest: 9" Hole; 15" Center Height; 17" Base

19 2352 Steady Rest: 14" Hole; 18-1/2" Center Height; 17" Base 2353 Steady Rest: 18" Hole; 18" Center Height; 17" Base 2354 Steady Rest: 18" Hole; 16" Center Height; 18" Base 2355 Steady Rest: 7" Hole; 12" Center Height; 10-1/2" Base 2356 Steady Rest: 6" Hex Hole; 10" Center Height; 9" Base 2357 Steady Rest: 14" Hole; 12" Center Height; 10" Base 2358 Steady Rest: 12-1/2" Hole; 17-1/2" Center Height; 21" Base 2359 Steady Rest: 15" Hole; 13" Center Height; 17" Base 2360 Steady Rest: 6" Hole; 10-1/2" Center Height; 10-1/2" Base 2361 Steady Rest: 6" Hole; 10-1/2" Center Height; 10-1/2" Base 2362 Steady Rest: 6-1/2" Hole; 10-1/2" Center Height; 10" Base 2363 Steady Rest: 6" Hole; 10" Center Height; 11" Base 2364 Steady Rest: 6" Hole; 6-1/2" Center Height; 6" Base 2365 Lot: Supports and Follow-Rests 2367 Warner & Swasey Steady Rest Model 5070, Capacity 4 to 11 inches 2368 STEADY REST, 22" CENTER HEIGHT, 19" HOLE, 24" BASE 2369 STEADY REST, 6" HOLE, 10" CENTER HEIGHT, 9-1/2" BASE 2370 Rohm Hydraulic Self-Centering Steady Rest S/N SLZ Chuck Rack 2372 Desk Type Cabinet with contents 2373 Flammable Safety Cabinet 2374 Flammable Safety Cabinet

20 2375 Heavy Duty Cabinet with (4) glide out shelves, Kane Engineering; 57 x 39 x Heavy Duty Tool Cabinet: (11) drawers with contents, 45 x 28 x Holding Tank: 520 gallon with safety enclosure S/N Justice Spill Containment for barrels 2380 Justice Spill Containment for barrels 2381 Kennedy Tool Box on casters: 5 drawer with contents; 27 x 18 x LISTA 4 Drawer Slide Out Shelve, Single doors, with contents OAD: 28" W X 28" D X 59-1/2" H 2383 LISTA Drawer Tool Cabinet, 2 doors, oad: 28" W x 29-1/2" D x 59-1/2" H, with contents 2384 Lot of 2: Cabinets with contents 2385 Lot of 2: Metal Tank for storing fluids 2386 Lot of 2: Metal Tool Cabinets: 2 door, 2 shelves; 2387 Lot of 2: Spill Containment - 2 sizes 2388 Lot of 2: Tool Cabinet: 12 drawers with 4 dividers each drawer with contents 2389 Lot of 2: Work Stations with backdrop, fluorescent lights 2390 Lot of 3: Chuck Stands 2391 Lot of 3: Chuck Stands 2392 Lot of 3: Chuck Stands 2392A LOT OF 3 CHUCK STANDS 2393 Lot of 5: Tool Boxes 2394 Metal Supply Cabinet; 2 door, with lock 2395 Pipe Cart 2396 Tool Cabinet: 2 door, 2 shelves, pull-out drawers, with contents: 36 x 25 x 35

21 2397 Tool Cabinet: Double Door, (6) drawers, with contents; 29 x 29 x Tool Rack with bins and contents 2399 Torin Tool Cart Set: Multi Drawer with contents 2400 Truck Tool Box 2401 Tool Cabinet 2402 Work Station, multi drawer, with contents; 96 x 30 x Heavy Duty Cat 60 Tooling: Davis #M , Ref: Heavy Duty Cat 60 Tooling: Collis 67845, 50VF1.00EM, 4.0 PRO W3 USA 2405 Heavy Duty Cat 60 Tooling: Universal Eng Heavy Duty Cat 60 Tooling: Davis / Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: S/N N/A 2409 Heavy Duty Cat 60 Tooling: The Warner & Swasey Co. No. 4165, Cleveland, OH, USA 2410 Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing No. 14, Cap. 0-1/ Heavy Duty Cat 60 Tooling: Carboloy CV50-EM EDP# Heavy Duty Cat 60 Tooling: S/N N/A 2414 Heavy Duty Cat 60 Tooling: S/N N/A 2415 Cat 60 Tooling: Parlec C60-500K2, Made in USA 2416 Heavy Duty Cat 60 Tooling: S/N N/A 2417 Heavy Duty Cat 60 Tooling: Davis , Heavy Duty Cat 60 Tooling: Davis

22 2419 Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G&L Davis M Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: Heavy Duty Cat 60 Tooling: S/N N/A 2428 Heavy Duty Cat 60 Tooling: S/N N/A 2429 Heavy Duty Cat 60 Tooling: Sandvik Coromant A M, Made in Germany 2430 Heavy Duty Cat 60 Tooling: Sandvik Coromant, A M, Made in Germany 2431 Heavy Duty Cat 60 Tooling: S/N N/A 2432 Heavy Duty Cat 60 Tooling: Davis M Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: S/N N/A 2438 Heavy Duty Cat 60 Tooling: Parlec C60-50DK Made in USA 2439 Heavy Duty Cat 60 Tooling: Kennemetal A40 NER4 NH Heavy Duty Cat 60 Tooling: Davis

23 2441 Heavy Duty Cat 60 Tooling: Parlec C60-50DK2, 25183, Made in USA 2442 Heavy Duty Cat 60 Tooling: Davis M Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: G Davis Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: Sandvik Coromant, A M, , Made in Germany 2448 Heavy Duty Cat 60 Tooling: Davis M Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: Parlec C60 50 DK2 US Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: Parlec C60 50DK2 USA Heavy Duty Cat 60 Tooling: G 374-D Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N*14 Cap 0.1/ Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N14 Cap 0.1/ Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: S/N N/A 2458 Heavy Duty Cat 60 Tooling: M Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N 14 Cap Heavy Duty Cat 60 Tooling: Parlec C60 50DK2 USA Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N 14 Cap 0.50

24 2463 Heavy Duty Cat 60 Tooling: Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: M Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: M Heavy Duty Cat 60 Tooling: S/N N/A 2470 Heavy Duty Cat 60 Tooling: S/N N/A 2471 Heavy Duty Cat 60 Tooling: G Heavy Duty Cat 60 Tooling: Davis Heavy Duty Cat 60 Tooling: S/N N/A, Super Chuck Jacobs Ball Bearing No. 16, Cap. 1/8-5/ Heavy Duty Cat 60 Tooling: EA Heavy Duty Cat 60 Tooling: 4A 2476 Heavy Duty Cat 60 Tooling: HTD Heavy Duty Cat 60 Tooling: HTD Heavy Duty Cat 60 Tooling: HTD Heavy Duty Cat 60 Tooling: HTD Heavy Duty Cat 60 Tooling: S/N N/A 2481 Heavy Duty Cat 60 Tooling: HTD Heavy Duty Cat 60 Tooling: S/N N/A 2483 Heavy Duty Cat 60 Tooling: HTD Heavy Duty Cat 60 Tooling: S/N N/A

25 2484A Heavy Duty Tooling: Davis B Heavy Duty Tooling: M C Heavy Duty Tooling: Davis D Heavy Duty Tooling: T#9 2484E Heavy Duty Tooling: HTD G F Heavy Duty Tooling: ANDIS 16FDX Lanomatic 2485 Heavy Duty Cat 60 Tooling: Full Pallet of Jaws 2486 Cat 50 Tooling: Universal Eng Cat 50 Tooling: TSO Universal Cat 50 Tooling: Parlec C50-15EM , Made in USA 2489 Cat 50 Tooling: Universal Eng , Pat , No Cat 50 Tooling: Parlec C50-10SC5, 14632, Made in USA 2491 Cat 50 Tooling: Universal Eng Cat 50 Tooling: Parlec C50-15SM , Made in USA 2493 Cat 50 Tooling: Sandvik Coromant, A , Made in Germany 2494 Cat 50 Tooling: S/N N/A 2495 Cat 50 Tooling: Sandvik Coromat A Made in Germany 2497 Aloris Tool Bar Holders: (2) D50EA Aloris Tooling D Series: (1) DA-4, (1) DA-41, (1) DA Aloris Tooling: Lot of 4: (2) DA-1, (1) DA-2, (1) DA Aloris Tooling: Lot of 4: (3) CA-2, (1) CA Aloris Tooling: Lot of 4: (3) DA-4Q, (1) DA-4l

26 2503 Aloris Tooling: Lot of 4: CA Aloris Tooling: Lot of 6, DA Aloris Tooling: Lot of 6, DA Aloris Tooling: Lot of 6, DA Assorted Tools and Tool Holders 2509 Bearing Puller 2510 Bolt Tension Tester 2511 Bullard 42" Cutmaster Transmission and End Housing 2512 Bullard 74 Cutmaster Crossrail with Side Turret & Ram 2513 Bullard Inlet Air Line Filter Model 41P Bullard Side Head 2515 Bullard Spiral Drive: Crossrail & Turret 2516 Center - Medium 2517 Cleto Air Grinder Model 15V-C60 S/N J Cross-slide for lathe 2519 Cross-slide for lathe 2520 Enerpac General Purpose Doubel Acting Hydraulic Ram 2521 Enerpac Low Profile Hydraulic Ram Jack 2522 Enerpac Model HVM-4 Hydraulic Electric Pump 2523 Enerpac Model P392 Hydraulic Hand Pump 2524 Enerpac Model P392 Hydraulic Hand Pump 2525 Enerpac Model P84 Hydraulic Hand Pump

27 2526 Enerpac Model P84 Hydraulic Hand Pump, Never Used 2527 Enerpac Model P18 Hydraulic Hand Pump 2528 TK Model RC6010T Hydraulic Ram Jack 2529 Hydraulic Hand Pump Set 2530 Enerpac Twin Cylinder Hydraulic Unit 2532 Fixture: 24" x 24" 2533 Bryant Model 269 G Grinding Spindle, 18" length, 4" dia., 11,000 rpm max. speed, S/N NA 2534 Hand Pump for lubricants 2535 Heavy Duty Center 2536 Heavy Duty Metal Table with Vise, Grinder, and moveable work station; 48" x 48" x 41" tall; 3/4" solid metal top, with 2 lower shelves 2537 Heavy Duty Tool Post 11" x 11" 2538 Heavy Duty Tooling: Set-up Tooling 2539 Heavy Duty Tooling: Set-up Tooling 2540 Heavy Duty Tooling: Set-up Tooling 2541 Heavy Duty Tooling: Set-up Tooling 2542 Hoshizak Ice Maker Model DCM-500BAF 2543 Hydraulic Pump, Model KT4578, S/N , Entwistle Co Live Center 2545 Lot of 2: (1) Skidmore-Wilhelm Model K S/N 5402, (1) Wilhelm Model RL S/N 9870, mounted on metal table with shelf 2546 Lot of 2: Bullard Elevating Screws for Bullard Cutmaster, R/L 88" L x 1-1/2" dia 2547 Lot of 2: ESKO Sealing Liquid Monitor SFM Lot of 2: Live Centers

28 2549 Lot of 2: Pressure Tools 2550 Lot of 2: Tool Posts 2551 Lot of 3: Tool Posts 2552 Lot of 4: Tool Post 2553 Aloris Tool Bar DA LOT of 2: Tooling Taper Attachment 2555 LOT of 2: Tooling; Steady Rest and Angle Plate 2556 Lot of 2: Face Cutters, (1) 20" dia x 5" hole (1) 16" dia x 5" hole 2557 Lot of 2: Face Cutters, (2) 16" dia x 5" hole x 2-1/2" hole 2558 Lot of 4 pcs: Tooling for Lucas 2559 LOT of 6: Aloris Tool Holder DA Lot of 6: Assorted Tool Holders 2561 Lot of 6: Reels new in box 2562 Lot of Cutting Tools 2563 Lot of Cutting Tools and Collets 2564 Lot of Drills 2565 Lot: Centers - Asst. sizes 2566 Lot: Drills 2567 Lot: Assorted Tooling including cutters, reamers, etc 2568 Lot of Bridgeport Tooling 2569 Lot of Misc Tooling 2570 Lot of Misc Tooling

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

Providing Answers For All Your Machine Tool Needs

Providing Answers For All Your Machine Tool Needs Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION

More information

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy

More information

Newland Machine Tool Group Inc.

Newland Machine Tool Group Inc. Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),

More information

That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance

That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance [ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable

More information

Key data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.

Key data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding. The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding

More information

COMPACT. Drilling COMPACT

COMPACT. Drilling COMPACT COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.

More information

Machine tools. Milling- and boring machines

Machine tools. Milling- and boring machines Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully

More information

YUASA MILLING MACHINE ACCESSORIES & TOOLS

YUASA MILLING MACHINE ACCESSORIES & TOOLS 97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage

More information

SAMSUNG Machine Tools PL60 CNC TURNING CENTER

SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

The Speed of Live and the Accuracy of Fixed

The Speed of Live and the Accuracy of Fixed The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.

More information

TL-Series Sub-Spindle Operator s Addendum

TL-Series Sub-Spindle Operator s Addendum 3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

ELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply

ELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque

More information

Machine Tool Practices, 8th Edition 2006 Correlated to: South Carolina Manufacturing Course Standards for Machine Technology 1, 2, 3, 4

Machine Tool Practices, 8th Edition 2006 Correlated to: South Carolina Manufacturing Course Standards for Machine Technology 1, 2, 3, 4 62300100 A. PERFORMING WORK SAFETY PRACTICES 62300101 Demonstrate the ability to work safely. SE: p.6-13, 208-210, 233-235 TE: Manual p.11-12, 51-52, 55-58 TECH: CD Shop Safety: PowerPoint Slides 1-8 62300102

More information

Flash Butt Welding Machines

Flash Butt Welding Machines Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

Machining Center MODEL: VH-610 MACHINE FEATURES

Machining Center MODEL: VH-610 MACHINE FEATURES Machining Center MODEL: VH-610 MACHINE FEATURES 10HP Spindle Motor, CAT40 Spindle Taper 8000 rpm spindle speed ( Optional 10,000 or 12,000 rpm ) Super grade Turcite-B On X/Y/Z Slideways Hardened & Ground

More information

Driven Toolholders for SAUTER Turrets

Driven Toolholders for SAUTER Turrets Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets

More information

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors

More information

CNC MILLING MACHINE TROUBLE SHOOTING. 1. Trouble Shooting. No Trouble Solution. 1.Check the air pressure

CNC MILLING MACHINE TROUBLE SHOOTING. 1. Trouble Shooting. No Trouble Solution. 1.Check the air pressure CNC MILLING MACHINE TROUBLE SHOOTING 1. Trouble Shooting No Trouble Solution 1 Tool magazine( (Umbrella type) Noise for tool changing Can t change the tool Tool number in chaos Tool magazine keep rotation

More information

SHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER

SHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com

More information

Manual piston sampler...m 11

Manual piston sampler...m 11 SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr

More information

Product catalogue, pipe and sewer cleaning systems

Product catalogue, pipe and sewer cleaning systems Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes

More information

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)

More information

DUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools

DUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools DUGARD Machine Tools That Create Solutions Since 1939 Dugard Heavy Duty Vertical Machining Centres DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 The unique inverted slideway design

More information

SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC

SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut

More information

45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020

45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020 45 URAI DSL Part Number T30353020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated

More information

CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines

CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines

More information

The teach-in lathe. New generation SE

The teach-in lathe. New generation SE The teach-in lathe New generation SE New generation SE Description Friendly user lathes with high chip removal capacity The SE Series combines the working capacity of a conventional lathe with the advantages

More information

MACHINING OPERATIONS AND MACHINE TOOLS

MACHINING OPERATIONS AND MACHINE TOOLS MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and

More information

Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a

Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or endmill which rotates about the spindle

More information

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,

More information

S40. The Allrounder for complex grinding jobs.

S40. The Allrounder for complex grinding jobs. S40 The Allrounder for complex grinding jobs. Advantages S40 Dimensions Distance between centres 1000/1600 mm (39.4 /63 ) Height of centres 175/225 mm (6.9 /8.9 ) Maximum workpiece weight 130/150 kg (286/330

More information

The Bonelle Tool and Cutter Grinder

The Bonelle Tool and Cutter Grinder The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Page 1 of 34 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate

More information

CNC - Lathe. in very maintained condition

CNC - Lathe. in very maintained condition CNC Lathe in very maintained condition Manufacture DOOSAN Type PUMA 2600 B Year of manufacture 2012 Control CNC FANUC 0iTD with Manual Guide i Machinenumber ML0200024 operating hours ca. 3.000 Spindle

More information

Machining Center MODEL: VL-850

Machining Center MODEL: VL-850 Machining Center MODEL: VL-850 MACHINE FEATURES 10HP Spindle Motor BT40/CAT40/DIN40 spindle dia. 150mm, 100% balanced with low vibration performs high precision machining. 8000 rpm spindle speed, ( Optional

More information

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due

More information

Static and Driven Tools LB and LT Series

Static and Driven Tools LB and LT Series Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed)

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed) Specifications for a Precision CNC Vertical Machining Center Introduction The Naval Research Laboratory Vacuum Electronics Branch requires a high precision computer numerically controlled (CNC) vertical

More information

CNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines

CNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines CNC Vertical Machining Center Large box-way and linear guide way machines Technical Datasheet CNC Vertical Machining Center Large box-way and linear guide way machines Spindle gear drive (50-taper) for

More information

Model RC Armature-Slot- Insulation Folder

Model RC Armature-Slot- Insulation Folder Model RC Armature-Slot- Insulation Folder 21 Model RC will handle insulation material up to 8 wide between its guides. Creasing rollers are adjustable sideways to make troughs up to 6 wide. A fixed ruler-guide

More information

HT3 series Peck Feed Drills, with Equal Drill Time

HT3 series Peck Feed Drills, with Equal Drill Time Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive

More information

CAMaster Options for the Stinger Line of CNC Machines

CAMaster Options for the Stinger Line of CNC Machines CAMaster Options for the Stinger Line of CNC Machines Recoil Indexing Lathe (All Stingers) The Indexing Lathe is mounted on the side of the machine so it does not interfere with the table top when it is

More information

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX 413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:

More information

CT930 / CT960. Key data. The Allrounder for complex grinding tasks. A member of the UNITED GRINDING Group. The Art of Grinding.

CT930 / CT960. Key data. The Allrounder for complex grinding tasks. A member of the UNITED GRINDING Group. The Art of Grinding. The Art of Grinding. A member of the UNITED GRINDING Group The Allrounder for complex grinding tasks. Key data The CT930/CT960 are very flexible internal cylindrical grinding machines for medium-sized

More information

INVESTMENT RECOVERY SERVICES

INVESTMENT RECOVERY SERVICES INVESTMENT RECOVERY SERVICES Late Model Roll Form Facility Mar 22, 2016 10am CST 3570 Shelby Rd Denton Texas 76207 United States Lot Description 1 TOOL BOX W/ TOOLS 2 MINI BAUTE MAGNETIC DRILL MDL: RB32

More information

PARTS SECTION. Section MF4

PARTS SECTION. Section MF4 PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator

More information

Our Stock Machines No cheap machines just well-priced and Great VALUE ones ALL reasonable offers will be considered

Our Stock Machines No cheap machines just well-priced and Great VALUE ones ALL reasonable offers will be considered Supplyline CNC Ltd 116 Dursley Road Trowbridge Wiltshire BA14 7AY 00-44-1225-765732 sales@supplylinecnc.co.uk www.supplylinecnc.co.uk VAT 674 4338 16 Registered in England No. 3140626 Our Stock Machines

More information

STEERING SYSTEM - POWER

STEERING SYSTEM - POWER STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and

More information

L I V E T O O L F O R O K U M A

L I V E T O O L F O R O K U M A L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,

More information

FACTORY INSTALLED OPTIONS:

FACTORY INSTALLED OPTIONS: Myford MG 12 M MG 12 ME Manually operated cylindrical grinding machine - capacity 5in x 12in - providing hand operated table traverse, hand operated wheelhead travel, table swivels 7 degrees either way,

More information

HOBBING MACHINE TYPE ZFWZ 8000x40

HOBBING MACHINE TYPE ZFWZ 8000x40 Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth

More information

Cat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM

Cat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM Page 1 of 19 Cat Electronic Technician 2015A v1.0 Product Status Report 2:49 PM Product Status Report Parameter Value Product ID WRK00337 Equipment ID WRK00337 Comments A01-52 C9 330D (THX37891) Parameter

More information

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common

More information

EQUIPMENT LIST. CNC MACHINING CENTERS (12 Machining Centers)

EQUIPMENT LIST. CNC MACHINING CENTERS (12 Machining Centers) EQUIPMENT LIST CNC MACHINING CENTERS (12 Machining Centers) 5: Mazak V-414/32 with M-32 CNC control and integral two pallet flexible manufacturing module.this state of the art machining center along with

More information

Series 30000 Hose Reels

Series 30000 Hose Reels Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are

More information

CNC Bed Mills. Machining Centers. and. powered by. TW-32-Q now with up to 15 Hp. TW-43-HV our unique horizontal /vertical machining center

CNC Bed Mills. Machining Centers. and. powered by. TW-32-Q now with up to 15 Hp. TW-43-HV our unique horizontal /vertical machining center CNC Bed Mills and Machining Centers powered by OR TW-32-Q now with up to 15 Hp TW-43-HV our unique horizontal /vertical machining center TW-60-MCO # 40 or 50 taper and up to 30 hp TW-32-Q - handwheels

More information

2010 APPLICATION REFERENCE GUIDE

2010 APPLICATION REFERENCE GUIDE 2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE

More information

Milling and Machining Center Basics

Milling and Machining Center Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,

More information

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate

More information

BLASTING SYSTEMS. Turbine blasting systems. Air blasting systems. Automatic Painting plants

BLASTING SYSTEMS. Turbine blasting systems. Air blasting systems. Automatic Painting plants BLASTING SYSTEMS Turbine blasting systems Air blasting systems Automatic Painting plants 1, Dust Collector 2, Cyclone Separator 3, Sand (shot) Storage Hopper 4, Bucket elevator 5, Primary separator 6,

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

RENISHAW measuring OMP 40 system EN3M0-0 Edgecam Advanced Milling ENS-M0-G EdgeCam Solid Machinist for Granite

RENISHAW measuring OMP 40 system EN3M0-0 Edgecam Advanced Milling ENS-M0-G EdgeCam Solid Machinist for Granite 1 Horizontal Machining Center MATSUURA Model: H-Plus 300 PC 5 Year: 2008 Control: Matsuura G-Tech 30i No. of pallets: 5 Size (each) 300 x 300 mm. Table indexation: 1 Index speed: 1,5 sek./90 Index speed:

More information

CNC HARDWARE & TOOLING BASICS

CNC HARDWARE & TOOLING BASICS Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,

More information

MKV Golf GTI Rear Brake Service - Replace Pads and Rotors

MKV Golf GTI Rear Brake Service - Replace Pads and Rotors Page 1 Installation Procedures MKV Golf GTI Rear Brake Service - This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of

More information

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

QP-2040L CNC VERTICAL MACHINING CENTER

QP-2040L CNC VERTICAL MACHINING CENTER Page 1 of 8 QP-2040L CNC VERTICAL MACHINING CENTER Page 2 of 8 MACHINE FEATURES: This fully upgradeable VMC is designed to accommodate various upgrades in the future so that it can be reconfigured for

More information

Los bienes se encuentran ubicados en: Tultitlán, Naucalpan y Guadalajara.

Los bienes se encuentran ubicados en: Tultitlán, Naucalpan y Guadalajara. Lote #1 Lote #2 Lote #3 Lote #4 Lote #5 Lote #6 Lote #7 Lote #8 Lote #9 Lote #10 Lote #11 Lote #12 Lote #1 1 MARCA GORTON, MODELO 8 1/2D, MILLING MACHINE; S/N 13292; Table Size: 9 x 29 ; Longitudinal Feed

More information

PRODUCT HIRE LIST PRODUCT HIRE LIST HIRE - SALES - REPAIR - TESTING LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS

PRODUCT HIRE LIST PRODUCT HIRE LIST HIRE - SALES - REPAIR - TESTING LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS PRODUCT HIRE LIST PRODUCT HIRE LIST 2014 PRICES ON REQUEST All products also available for purchase LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS HIRE - SALES - REPAIR - TESTING INTRODUCTION THE

More information

Operating, Installation, and Maintenance Instructions

Operating, Installation, and Maintenance Instructions ELKHART BRASS MFG. CO., INC. 1302 WEST BEARDSLEY AVENUE P.O. BOX 1127 ELKHART IN 46515 (574) 295-8330 FAX (574) 293-9914 Operating, Installation, and Maintenance Instructions RAM Personal Portable Monitor

More information

Whirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread

Whirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority

More information

Making Clock Wheel & Pinion Cutters

Making Clock Wheel & Pinion Cutters Making Clock Wheel & Pinion Cutters When making hand made clocks or in repair work an odd size cutter is sometimes needed. Sometimes just one pinion is required and does not justify the cost of a commercial

More information

SBC90. Abrasive Blast Cabinet Assembly & Operating Instructions

SBC90. Abrasive Blast Cabinet Assembly & Operating Instructions SBC90 Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important

More information

V-Series. 4-Way Precision Lathe with Automated Cycles. www.weiler.de. Precision in Every Dimension. New product: the first 4-way precision

V-Series. 4-Way Precision Lathe with Automated Cycles. www.weiler.de. Precision in Every Dimension. New product: the first 4-way precision Precision in Every Dimension Service New product: the first 4-way precision lathe with automated cycles V-Series 4-Way Precision Lathe with Automated Cycles www.weiler.de Manual/Engine Lathes Cycle-Controlled

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

Tool Turrets and Tool Discs

Tool Turrets and Tool Discs Our other products Automatic Tool Changer Chucking Cylinders Tool Discs Indexing Tables Tool Turrets and Tool Discs Pragati Automation Pvt. Ltd. 1, IV Phase, 11th Cross, Peenya Industrial Area Bangalore

More information

Servo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204

Servo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 Servo/Hydraulic Press Brake HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 The HG Series Press Brake An ultra-high precision, high-speed compact bending solution featuring an advanced

More information

367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.

367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube. PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection

More information

SAMSUNG Machine Tools

SAMSUNG Machine Tools SAMSUNG Machine Tools VERTICAL MACHINING CENTER SMEC Co., Ltd. 666, Gasul-ri, Daesan-myeon, Changwon-si Gyeongsangnam-do, Korea 641-921 Tel +82 55 250 4800 Fax +82 55 253 5355 http://www.esmec.com www.esmec.com

More information

Monster Mini Stock Assn rules for 2015

Monster Mini Stock Assn rules for 2015 Monster Mini Stock Assn rules for 2015 *note 2 engine combinations* BODY - stock auto only may have complete aluminum body inner panel may be removed rear of car must be closed - no holes or flaps to meet

More information

PBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com

PBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in Strong Machine bed, dual columns and fixed bridge ensure a rigid frame

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive

More information

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars

More information

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928 WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.

More information