Ceta Form Hex and TORX L Keys A complete range of industrial quality keys We present a complete range of industrial quality L keys from standard hex to TORX allowing virtually any application. All the keys in this chapter feature: Premium quality 59CrMoV4 steel. Precision hardening. Bright nickel finishing for hex keys and black finishing for TORX keys against corrosion. Clearly marked sizes for hex keys bigger than 3 mm. Chamfered tips for easy insertion for hex keys bigger than 3 mm. The ballpoint hex keys in this chapter feature the possibility of working with an angle up to 25 thanks to special ball profile. Ceta Form pouches (only for LT/12) Ceta Form basic clips holder L Hexagonal Keys 800 Hexagonal Keys, Long Arm Short arm hexagonal key for hexagon socket screws. steel, bright nickel plated. Chamfered tips for easy insertion, for sizes over 3 mm. DIN ISO 2936. Long arm hexagonal key for hexagon socket screws. steel, bright nickel plated. Chamfered tips for easy insertion, for sizes over 3 mm. DIN ISO 2936-L. L/1.5 1.5 14 45 1 12 L/2.0 2.0 16 50 2 12 L/2.5 2.5 18 56 4 12 L/3.0 3.0 20 63 5 12 L/3.5 3.5 21 66 8 12 L/4.0 4.0 25 70 10 12 L/4.5 4.5 25 75 15 12 L/5.0 5.0 28 80 18 12 L/6.0 6.0 32 90 30 12 L/7.0 7.0 34 95 43 12 L/8.0 8.0 36 100 59 12 L/9.0 9.0 38 105 79 12 L/10.0 10.0 40 112 103 12 L/11.0 11.0 42 118 131 12 L/12.0 12.0 45 125 160 12 L/14.0 14.0 55 140 260 12 L/17.0 17.0 60 160 430 12 L/19.0 19.0 70 180 620 12 815 1.5 14 90 2 12 802 2.0 16 100 4 12 825 2.5 18 112 6 12 803 3.0 20 126 9 12 804 4.0 25 140 19 12 805 5.0 28 160 33 12 806 6.0 32 180 54 12 808 8.0 36 200 105 12 810 10.0 40 224 185 12 812 12.0 45 250 295 12 90
smartools 900 Ballpoint Hexagonal Keys, Long Arm 700 TORX L Keys Long arm hexagonal key for hexagon socket screws. steel, bright nickel plated. Chamfered tips for easy insertion, for sizes over 3 mm. Angle entry up to 25 DIN ISO 2936-L Short arm L key for TORX screws. steel, black finish. 915 1.5 14 90 2 12 902 2.0 16 100 4 12 925 2.5 18 112 6 12 903 3.0 20 126 9 12 904 4.0 25 140 19 12 905 5.0 28 160 33 12 906 6.0 32 180 55 12 908 8.0 36 200 105 12 910 10.0 40 224 185 12 912 12.0 45 250 295 12 705 T5 16 38 2 12 706 T6 16 42 2 12 707 T7 16 48 2 12 708 T8 16 48 3 12 709 T9 16 48 3 12 710 T10 17 51 4 12 715 T15 18 54 5 12 720 T20 19 57 7 12 725 T25 20 60 9 12 727 T27 21 64 15 12 730 T30 24 70 20 12 740 T40 26 76 31 12 745 T45 28 83 44 12 750 T50 32 95 51 12 You can see our C-PLUS ballpoint screwdrivers on page 17 of our catalogue. On demand, we can also manufacture C-PLUS regular hex drivers. 91
Ceta Form Hex and TORX L Keys A complete range of industrial quality keys LT Hexagonal Key Sets LT/9 9 Piece Hexagonal Key Set, Short Arm L 1.5 mm; 2.0 mm; 2.5 mm; 3.0 mm; 4.0 mm; 5.0 mm; 6.0 mm; 8.0 mm; 10.0 mm 247 LT9X - in blaster pack. LT/12 12 Piece Hexagonal Key Set, Short Arm L 1.5 mm; 2.0 mm; 2.5 mm; 3.0 mm; 3.5 mm; 4.0 mm; 4.5 mm; 5.0 mm; 6.0 mm; 8.0 mm; 9.0 mm; 10.0 mm 416 Each set is packed in a high quality fabric pouch. LT/800 9 Piece Hexagonal Key Set, Long Arm 800 1.5 mm; 2.0 mm; 2.5 mm; 3.0 mm; 4.0 mm; 5.0 mm; 6.0 mm; 8.0 mm; 10.0 mm 402 LT800X - in blaster pack. LT/900 9 Piece Ballpoint Hexagonal Key Set, Long Arm 900 1.5 mm; 2.0 mm; 2.5 mm; 3.0 mm; 4.0 mm; 5.0 mm; 6.0 mm; 8.0 mm; 10.0 mm 402 LT900X - in blaster pack. LT/700 8 Piece TORX Key Set, Short Arm 700 T9; T10; T15; T20; T25; T27; T30; T40 123 92
C-PLUS Softgrip T-Handle Keys The multi-purpose keys with 2K handles The dual-purpose T-handle keys with a comfortable grip. The attractively designed new series combine the operational characteristics of a T handle screwdriver and an L shaped key in a single tool. While using the longer blade, the ergonomic handle allows a turning power that is several times higher than a traditional no-handle key. When using the shorter blade, the user can create a lever effect by the longer blade. All the keys in this program feature: Softgrip 2K technology handles. Premium quality 59CrMoV4 steel in blades. Precision hardening. Mat chrome finishing with a non-peel durable, black point tip. Clearly marked sizes for hex keys bigger than 3 mm and TORX keys. Chamfered tips for easy insertion for hex keys bigger than 3 mm. A hanging hole for practical storage. Imprinted EAN codes. K10 Hexagonal Keys, with C-PLUS Softgrip T-Handle K11 Ballpoint Hex. Keys, with C-PLUS Softgrip T-Handle Tip : High torque softgrip T-Handle keys for hexagon socket screws. blade, mat chrome plated. Non-peel, ultimate fit black point tips, magnetized. Ergonomic, softgrip multi-component technology C-PLUS handle. Hanging hole for organized workshops. K10-020-100 2.0 100 59 13 18 12 K10-025-100 2.5 100 59 13 20 12 K10-030-100 3.0 100 59 13 23 12 K10-040-150 4.0 150 70 15 46 12 K10-050-150 5.0 150 70 15 58 12 K10-060-200 6.0 200 80 17 100 12 K10-080-200 8.0 200 80 17 160 12 K10-100-200 10.0 200 90 22 240 12 Tip : High torque softgrip T-Handle keys for hexagon socket screws. blade, mat chrome plated. Non-peel, ultimate fit black point tips, magnetized. Ergonomic, softgrip multi-component technology C-PLUS handle. Hanging hole for organized workshops. Angle entry up to 25. K11-030-100 3.0 100 59 13 23 12 K11-040-150 4.0 150 70 15 46 12 K11-050-150 5.0 150 70 15 60 12 K11-060-200 6.0 200 80 17 103 12 K11-080-200 8.0 200 80 17 159 12 K11-100-200 10.0 200 90 22 253 12 93
C-PLUS Softgrip T-Handle Keys The multi-purpose keys with 2K handles K12 TORX Keys, with C-PLUS Softgrip T-Handle Tip : High torque softgrip T-Handle keys for TORX screws. blade, mat chrome plated. Non-peel, ultimate fit black point tips, magnetized. Ergonomic, softgrip multi-component technology C-PLUS handle. Hanging hole for organized workshops. K12-009-100 T9 100 59 13 22 12 K12-010-100 T10 100 59 13 23 12 K12-015-100 T15 100 59 13 25 12 K12-020-150 T20 150 70 15 43 12 K12-025-150 T25 150 70 15 48 12 K12-027-150 T27 150 70 15 61 12 K12-030-150 T30 150 80 17 85 12 K12-040-150 T40 150 80 17 100 12 K99 C-PLUS Softgrip T-Handle Key Sets K99-10-06 6 Piece C-PLUS Softgrip T-Handle Hexagonal Key Set K10 2.5 mm; 3.0 mm; 4.0 mm; 5.0 mm; 6.0 mm; 8.0 mm 544 K99-11-05 5 Piece C-PLUS Softgrip T-Handle Ballpoint Hexagonal Key Set K11 3.0 mm; 4.0 mm; 5.0 mm; 6.0 mm; 8.0 mm 523 K99-12-06 6 Piece C-PLUS Softgrip T-Handle TORX Key Set K12 T10; T15; T20; T25; T30; T40 447 All sets packed in attractive cardboard display boxes. 94
PracFold Folding Key Set Small but indispensable The new PracFold practical folding key sets from Ceta Form, either hex or TORX, combine the mostly used sizes in a single, easy to carry and practical tool. These practical tools feature: Precision hardened, premium quality 59 CrMoV4 material. Bright nickel finishing for hex keys and gun metal finishing for TORX keys against corrosion. Premium quality cellulose acetate plastics which withstand against even very high torque loads and provide for durability. Proper layout of all blades which allows easy selection of the desired size. Handy compact sizes to carry in pocket, tool box etc. K99-F1 7 Piece Hex Key Folding Set K99-F3 8 Piece TORX Key Folding Set Practical folding set for hexagonal screws, for use in hard to reach places. steel, bright nickel plated. Ergonomic, new technology handle. Easy selection of the required hex key thanks to proper layout of blades. Practical folding set for TORX screws, for use in hard to reach places. steel, gun metal finished. Ergonomic, new technology handle. Easy selection of the required TORX key thanks to proper layout of blades. 2.0 mm; 2.5 mm; 3.0 mm 4.0 mm; 5.0 mm; 6.0 mm; 8.0 mm 250 T9; T10; T15; T20; T25; T27; T30; T40 260 95
Miscellaneous Tools F37 TORX Flagdrivers with P-handle F38 TORX Flagdrivers with T-handle Flag P-Handle TORX driver especially for the indexable inserts on milling heads blade, black finished. Flag T-Handle TORX driver especially for the indexable inserts on milling heads blade, black finished. Lmm Lmm F37-06 T6 3.0 35 7 12 F37-07 T7 3.0 35 7 12 F37-08 T8 3.0 40 7 12 F37-09 T9 3.0 40 7 12 F37-10 T10 3.0 40 7 12 F38-06 T6 3.0 35 9 12 F38-07 T7 3.0 35 9 12 F38-08 T8 3.0 40 9 12 F39-09 T9 3.0 40 9 12 F38-10 T10 3.0 40 9 12 Z Offset Slotted Screwdrivers Z Offset Phillips Screwdrivers Features (+): Offset screwdrivers for slotted screws. Precision hardened chrome-vanadium blade, bright nickel plated. For operation in restricted areas. DIN 5264-B, ISO 2380 Features (+): Offset screwdriver for Phillips screws. Precision hardened chrome-vanadium blade, bright nickel plated. For operation in restricted areas. DIN 5260, ISO 8764-PH Z/40 4.0 0.8 4.0 100 12 15 12 Z/55 5.0 1.0 5.0 125 16 26 12 Z/12 PH1/PH2 6.0 100 20 30 12 96