Product # Overall Length Claw Blade Width Head Width Weight in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2.
|
|
|
- Elvin Adams
- 7 years ago
- Views:
Transcription
1 Stanley Hand tools stanley Fubar Forcible entry tools Forcible entry tool designed by responders for vehicle extrication and extreme demolition. 8-in-1 tool for prying, splitting, board bending and striking jobs: demolition head, gas shut-off feature, spanner wrench, pry bar for ripping, hydrant wrench, second-tier board jaw (also fits square hydrant nuts), board jaw sized specifically for grabbing common dimensional lumber, beveled nail slot for pulling and prying nails. One-piece forged steel bar for durability. Heat-treated and tempered striking face helps prevent chipping. Heat-resistant grips are durable and lightweight. Carabiner holes for easy attachment of shoulder strap. High-visibility 3M Scotchlite enhances visibility. Product # Overall Length Head Width Face Weight in (457 mm) 6-1/2 in (165 mm) 1-5/8 x 1-3/8 in (41 x 35 mm) 4.6 lbs (2.7 kg) in (762 mm) 6-3/4 in (171 mm) 2 x 1-5/8 in (50 x 41 mm) 8 lbs 13 oz (4 kg) 3M Scotchlite are trademarks of 3M. demolition tools stanley Fatmax Fubar iii Textured Bi-Material grip panels are attached to handle on both sides. Heat-treated and tempered striking face with ripping hook and chamfered edges. Two tiered, serrated jaw for grabbing common dimensional lumber and decking. Nail slot on claw end with beveled edge for pulling nails and prying. 4-in-1 tool for prying, splitting, board bending, and striking jobs. Pentagonal shape below serrated jaw can be used as a fire hydrant wrench to turn on/off a fire hydrant. Slotted claw end can also be used as a gas valve wrench to turn gas valve on/off. Product # Overall Length Claw Blade Width Head Width Face Weight in (762 mm) 2 in (51 mm) 6-3/4 in (171 mm) 2 x 1-5/8 in (50 x 41 mm) 8.51 lbs (3.86 kg) stanley Fatmax Fubar Textured Bi-Material grip over molded directly onto the bar for comfort and to provide a slip resistant grip. Heat-treated and tempered striking face with chamfered edges. Two tiered, serrated jaw for grabbing common dimensional lumber and decking. Nail slot on claw end with beveled edge for pulling nails and prying. 4-in-1 tool for prying, splitting, board bending, and striking jobs. Tool comes with two protective covers over sharp ends for safety. Product # Overall Length Claw Blade Width Head Width Weight 3M Scotchlite are trademarks of 3M in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2.58 kg) 980 WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES TOOL Fax:
2 stanley Fatmax Fubar Functional utility bar Textured Bi-Material grip over molded directly onto the bar for comfort and to provide a slip resistant grip. Heat-treated and tempered striking face with chamfered edges Serrated jaw for grabbing lumber. Beveled chisel end for prying. 4-in-1 tool for prying, splitting, board bending, and striking jobs. Fits easily in a hammer loop. Tool comes with a protective cover over chisel end for safety. Stanley Hand tools Product # Overall Length Chisel Blade Width Head Width Face Weight in (381 mm) 1 in (25 mm) 4-3/4 in (120 mm) 1-3/4 x 1-1/4 in (41 x 31 mm) 2.6 lbs (1.176 kg) stanley Fubar demolition pry bar One piece forged high carbon alloy steel for Precision ground chisel and prying edge for better penetration. 3 striking surfaces for better ripping and prying. Pointed, beveled edge for cutting and ripping. Hook and beveled edge for cutting and ripping. Multiple nail pullers for maximum leverage and versatility. Non-slip grip for comfort and better leverage. demolition tools Product # Overall Length Width Height Beveled End Width Chisel End Width Weight STHT /4 in ( mm) 3-13/16 in (97 mm) 2-3/8 in (60 mm) 1-1/8 in (29 mm) 4-7/8 in (124 mm) 1.93 lbs (0.888 kg) stanley wonder bar x21 pry bar Bar has black finish to provide corrosion resistance. Nail slots on claw ends with beveled edges for pulling nails and prying. Product # Overall Length Claw Blade Width (A) Claw Blade Width (B) in (533 mm) 1-3/4 in (44 mm) 1-3/4 in (44 mm) Accurate at time of printing, consult for updated information. 981
3 Stanley Hand tools stanley super wonder bar pry bar Foot-levered, hands-free panel lift. Forged, heat-treated, high-carbon steel for Polished and beveled cutting edges. Arched center for swing during nail pulling no need for a wood block. Tight radius on bend angle aids in positioning bar. Extended tongue for grip and access in hard-to-reach places. High-visibility, powder-coated finish. Product # Overall Length Claw Blade Width (A) Claw Blade Width (B) Weight /2 in (394 mm) 1-3/4 in (44 mm) 1-3/4 in (44 mm) 1.75 lbs (0.80 kg) stanley wonder bar pry bar steel construction for increased Yellow powder-coated claw end for high visibility. Tear-shaped, beveled nail slot specifically for pulling nails. Nail slots on claw ends with beveled edges for pulling nails and prying. demolition tools Product # Overall Length Claw Blade Width (A) Claw Blade Width (B) /4 in (324 mm) 1-3/4 in (44 mm) 1-3/4 in (44 mm) stanley wonder bar ii pry bar Nail slots on claw ends with beveled edges for pulling nails and prying. Product # Overall Length Width /8 in (184 mm) 7/8 in (22 mm) stanley Fatmax wrecking bars Ideal for heavy demolition work. Heat-treated 3/4" diameter spring steel for extreme Lightweight design for ease of use. Precision ground edge for penetration. 25% wider prying edge, versus FatMax Wrecking Bars, for better leverage. Flat striking face for demolition work. High-visibility, powder-coated finish. Slotted claw and beveled ends for functionality and performance. Product # Overall Length Blade Width (A) Blade Width (B) Weight in (610 mm) 2-1/4 in (57 mm) 1-7/16 in (37 mm) 4 lbs (1.8 kg) in (914 mm) 2-1/4 in (57 mm) 1-7/16 in (37 mm) 5.6 lbs (2.54 kg) 982 WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES TOOL Fax:
4 stanley Fatmax wrecking bars Forged one-piece steel construction for increased Tri-lobe design for increased Forged recesses in bar for better grip. Yellow powder coated body for high visibility and provides corrosion resistance. Nail slot on claw ends with beveled edges for pulling nails and prying. Product # Overall Length Claw Blade Width (A) Claw Blade Width (B) Weight /2 in (343 mm) 1-1/8 in (29 mm) 1-1/16 in (27 mm) 1.7 lbs (0.77 kg) in (609 mm) 1-3/4 in (44 mm) 2 in (51 mm) 5.7 lbs (2.50 kg) in (914 mm) 2 in (51 mm) 1-3/4 in (44 mm) 8.4 lbs (3.80 kg) Stanley Hand tools stanley wrecking bars Forged one-piece steel construction for increased Yellow powder coated claw end for high visibility. Beveled chisel end for prying. Nail slot on claw end with beveled edge for pulling nails and prying. Both chisel and claw end are polished. Product # Overall Length Claw Blade Width (A) Claw Blade Width (B) Weight Color in (457 mm) 15/16 in (24 mm) 1-3/16 in (30 mm) 2 lbs (0.907 kg) Yellow in (597 mm) 1-1/4 in (32 mm) 1 in (25 mm) 3.7 lbs (1.68 kg) Yellow in (760 mm) 1-1/4 in (32 mm) 1 in (25 mm) 4.5 lbs (2.04 kg) Yellow in (914 mm) 1-1/4 in (32 mm) 1 in (25 mm) 5.3 lbs (2.40 kg) Black/Yellow demolition tools stanley offset pattern ripping chisel Forged one-piece steel construction for increased Hexagonal bar with black finish to provide corrosion resistance. Yellow powder coated claw end for high visibility. Tear shaped, beveled nail slot specifically for pulling nails. Nail slots on claw ends with beveled edges for pulling nails and prying. Product # Overall Length Claw Blade Width (A) Claw Blade Width (B) Weight in (431 mm) 1-1/2 in (38 mm) 1-5/8 in (41 mm) 1.90 lbs (0.86 kg) stanley nail puller Ideal for basic demolition work. 90 offset claw for prying leverage. Bevel-sharpened ripping chisel. 5/8" diameter high-carbon steel. Product # Overall Length Blade Width Weight in (381 mm) 1 in (25 mm) 1.5 lbs (0.68 kg) Accurate at time of printing, consult for updated information. 983
5 Stanley Hand tools stanley Fatmax claw bars Ideal for precision nail pulling and prying. Polished, beveled claws for precise penetration. Flat striking face allows claw to be driven under deeply embedded nails. Forged, high-carbon alloy steel for long life. Tempered to help reduce chipping. High-visibility, powder-coated finish in (356 mm) 1.38 lbs (0.624 kg) /8 in (251 mm) 1.08 lbs (0.489 kg) stanley claw bars Ideal for precision nail pulling and prying. Polished, beveled claws for precise penetration. Flat striking face allows claw to be driven under deeply embedded nails. Forged, high-carbon alloy steel for long life. Tempered to help reduce chipping. demolition tools /8 in (206 mm) 5.6 oz (0.158 kg) /8 in (251 mm) 10.7 oz (0.304 kg) /8 in (302 mm) 15.6 oz (0.442 kg) stanley molding bars Ideal for reducing material damage when prying molding and trim. Polished flat surface and beveled claws for precise penetration. Forged, high-carbon spring steel for extreme Flat striking face allows claw to be driven under deeply embedded nails. Tempered to help reduce chipping and heat-treated for durability. Product # Overall Length Blade Width Weight /8 in (193 mm) 1-3/4 in (44 mm) 8 oz (0.227 kg) /4 in (247 mm) 1-3/4 in (44 mm) 10.9 oz (0.309 kg) stanley nail claw Nail slot on claw end for extracting nails. Extracting claw can be driven beneath the head of an embedded nail and then used to pull the nail head above the surface. Cushion grip on handle for comfort /4 in (260 mm) 1.1 lbs (0.50 kg) 984 WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES TOOL Fax:
6 stanley nail puller Forged one-piece Nail slots on claw ends for extracting nails. Extracting claws can be driven beneath the head of an embedded nail and then used to pull the nail head above the surface. Features 90 and 30 offset claws in (279 mm) 1.1 lbs (0.54 kg) Stanley Hand tools stanley board bender Heat-treated steel construction for increased Bar has black finish to provide corrosion resistance. Cushioned handle designed for kneeling to maintain pressure. Frees both hands for nailing. Straightens decking and joists with ease. Hook end accepts lumber up to 1-3/4" in (660 mm) 5 lbs (2.27 kg) Straighten Joists. Hook Tool on Joist. Push Hadle Down. Boards Squeeze Tight. demolition tools stanley panel lifters Made of high-impact ABS. Angled handle keeps hands away from panel for comfort. Ergonomic design helps move materials with ease. Ideal for grabbing and carrying lumber, drywall and gypsum board. Product # Color Overall Length Panel Width Weight Orange 14-1/2 in (368 mm) 6-1/2 in (165 mm) 0.60 lbs (0.27 kg) Yellow 14-1/2 in (368 mm) 6-1/2 in (165 mm) 0.60 lbs (0.27 kg) Accurate at time of printing, consult for updated information. 985
TAPE WIDTH CASE. 11' 1-1/4" ABS/Rubber Yellow/Black
Stanley Hand tools measuring Tools measuring tape selection guide SHORT TAPES Stanley FatMax Xtreme with BladeArmor Coating Stanley FatMax with BladeArmor Coating Stanley FatMax Keychain Tape Rule Stanley
SCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
Metal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
ShORT TApES 4-8 FATMAx xtreme FATMAx MAx powerlock 5-7 LEvERLOck STANLEy LONG TApES 9-11
MEASURING TOOLS Stanley has been manufacturing high-quality measuring tools since 1854, well before Henry Ford s Model T and Orville and Wilbur s fun-fly at Kitty Hawk. That same year, A. Stanley & Company
LEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
Industrial Knives and Blades
Industrial Knives and Blades Hyde Tools makes custom-tailored tools of the trade that professionals in many fields use to work quickly and precisely. There are utility knives and hand knives for flooring
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
Ceiling Mounted Folding Attic Ladders Installation Instructions
Ceiling Mounted Folding Attic Ladders Installation Instructions WARNING Before you start installing your new Louisville Ceiling Mounted Folding Attic Ladder, you must read and understand the following:
$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
GENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
14 th Kildare Scouts Section
Objectives The objective of this lesson it to teach you about the safe use of Knives, Axe s and Saws. These are essential tools for use while on camp or on Pioneering projects, however they can be very
Screen Melts. Introduction. Selecting Screen Material. Prefire Before Using. Spalling. Kiln Shelf
Introduction There are two terrific reasons for melting glass through screens. First because screen melts produce uniquely intricate patterns not possible any other way and second because it does it using
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
CLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
Panel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST
Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy
Recommended Forklift Free System Features for Proper Safety and Ergonomic Operation
When re-designing material handling flow to address restricted use of forklifts (Forklift Free), equipment ergonomics and safety play a key role. Following is a list of equipment and corresponding features
Makes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
2016 Indica Sell A Rama Promotion Receive a 10% discount on your complete order (excluding Wheelbarrow Promo pricing which is Net) when you order
2016 Indica Sell A Rama Promotion Receive a 10% discount on your complete order (excluding Wheelbarrow Promo pricing which is Net) when you order $400 Net. worth of the following New Garant items ULTRA-STURDY
SCISSORS, SNIPS AND CUTTING TOOLS
SCISSORS, SNIPS AND CUTTING TOOLS Wiss Table of Contents Contents Page No. Snips Introduction 207 Metalmaster Compound Action Snips 208-210 Metal-Wizz Snips 211 All-purpose Cutter 211 Snips out of Drop
TOOLS FOR SELF RELIANCE REFURBISHING SHEET No 2. Registered Charity No 280437. Saws for Woodworking
Registered Charity No 280437 Saws for Woodworking Issued December 2002 Registered Charity No 280437 page no 1 SAW TYPES Rip saw For cutting along the grain Crosscut saw [A smaller version is known as a
CLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
Professional HEX Tools Inch & Metric
Complete Hex Program Professional HEX Tools Inch & Metric 2 Toll Free: (800) 494-6104 Wiha Hex Tools Index DESCRIPTION Page T-handles 8 PocketStar Fold Outs 16 L-keys - Long/Short 17-20 Nickel & Black
Guidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
Pole Lathe and Shave Horse Design
Pole Lathe and Shave Horse Design These pictures and accompanying words are Copyright Michael Hughes February 2002. They are not to be re-produced, in part or whole, without permission from the author.
The Hive Bodies. In the Beekeeper s Work Shop. Building a Bee Hive: The Hive Bodies. by Stephen E. Tilmann
The Hive Bodies In the Beekeeper s Work Shop The hive body is the heart of a managed bee hive colony (Figure 1). It is where the queen lays her eggs, the house bees raise the brood and the workers store
Guidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
Installing Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
Stainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,
POP-UP TENTS 5 X 5 (STEEL ONLY) 8 X 8 (STEEL ONLY) EPS-DOUBLET.COM info@eps-doublet.com 800 227 0337 1
POP-UP TENTS Pop-up tents by EPS-Doublet are fast up, fast down and otherwise hassle free, making them ideally suited for multiple venue set ups, trade show booths and traveling product demos and sampling.
TABLE OF CONTENTS INTERIOR BANNER DISPLAYS 2-4 LIGHT BOX DISPLAYS 5 EXTERIOR SIGN DISPLAYS 6 HARDWARE 7-9
DISPLAY CATALOG TABLE OF CONTENTS 2-4 LIGHT BOX DISPLAYS 5 EXTERIOR SIGN DISPLAYS 6 7-9 Whether you need a small yard sign or an oversized banner display, look to Signs and Graphics by FedEx Office to
W I T H I N J O I ST S I N STA L L AT I ON
Radiantec W I T H I N J O I ST S I N STA L L AT I ON I N S TA L L AT I O N S U P P L E M E N T 260 Joists When tubing is placed beneath a joisted floor system, it is weaved between the joists and supported
Installation Guide for Andersen Architectural Wood Inswing Entry Doors
Installation Guide for Andersen Architectural Wood Inswing Entry Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are
CABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
AMERICAN GOTHIC PLAYHOUSE
AMERICAN GOTHIC PLAYHOUSE Project Plan #856 Sheet 1 of 5 Pick a spot and get started with the beautiful that your kids will love. The design of the playhouse includes 35 square feet of interior space plus
How to Install UnderDeck The Original.
How to Install UnderDeck The Original. TOOLS: Chalk Line Caulk Gun Garden hose or water bucket Gloves Hammer or Screw Gun Power Mitre Saw with OSB Blade Pencil Pliers Safety Glasses Straight Edge / Carpenter
Wood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
AutoSplitter Nut Splitter
AutoSplitter Nut Splitter Designed for Speed & Safety Designed for Operator Comfort Removes Corroded Nuts Fast Removes Frozen Nuts Safely Fits Tight Spaces Cuts through the Hardest Nuts Leading provider
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
Reputable high end tools trusted by professional plumbers, electricians, mechanics, and more. Not your average department store tools.
CHANNELLOCKINFO What are CHANNELLOCK tools? Reputable high end tools trusted by professional plumbers, electricians, mechanics, and more. Not your average department store tools. Best known for its Tongue
SPILL CONTAINMENT PRODUCTS
SPILL CONTAINMENT PRODUCTS CHEMISAFE spill containment products help you comply with environmental regulations. Keep your staff safe from accidental slips, protect your workfloor and limit high clean-up
Brick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
Safety Grating GSSG-13R GRIP STRUT. safety grating
Safety Grating GSSG-13R safety grating Table of Contents & Advantages Advantages.................................................... 2 Proof Of Performance...................................... 3 General
MORE CARE. BUILT IN. VOLVO EXCAVATOR. hydraulic hammers
MORE CARE. BUILT IN. VOLVO EXCAVATOR hydraulic hammers For extra-tough conditions, Volvo hammers deliver high impact Stubborn rock. Concrete debris. Frost-locked earth. These are the kinds of conditions
Notes. Material 1. Tools the employee is expected to operate
OSHA Standard29 CFR 1910.211-.247, Subpart O, Machinery and Machine Guarding, and Subpart P, Hand and Portable-Powered Tools and other Hand- Held Equipment. Hand Tool Safety Preparation 1. Read Applicable
C-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
By SP Partners, LLC. www.rainbowatticstair.com INSTALLATION GUIDE. Prestige
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE Prestige IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed while home is under
DECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS. 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty 866.729.2378 WWW.MOISTURESHIELD.
DECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty Welcome To The Even Greater Outdoors. Congratulations on choosing MoistureShield for your
HYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
Panel/Hand Saw Kit Assembly Instructions
Panel/Hand Saw Kit Assembly Instructions PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE BEGINNING Brief Summary You will be performing the following Tasks: 1. Determining the degree of shaping laying out
Micro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
Rudder Repair and refinish
Rudder Repair and refinish Montgomery 23 Dauntless The before photograph A receipt found inside the boat showed a previous owner had enlisted a boat yard to perform maintenance on the rudder by shortening
CIRCULAR SAW SAFETY Reviewed 9/24/2007
1. General Safety Rules CIRCULAR SAW SAFETY Reviewed 9/24/2007 DANGER -- Keep hands away from cutting area behind the saw blade since kickback could cause the saw to jump backwards over your hand. Keep
CANYON RIDGE. collection LIMITED EDITION SERIES ULTRA-GRAIN SERIES. clopay.com
CANYON RIDGE collection LIMITED EDITION SERIES ULTRA-GRAIN SERIES Canyon Ridge Collection Limited Edition Series Design 13 Shown in Dark Finish with Mahogany Cladding, Mahogany Overlays and REC13 Window
Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
6.0 Implementation: Retrofitting Gable End Walls with L-Bent Straps
6.0 Implementation: Retrofitting Gable End Walls with L-Bent Straps Order of presentation: To give you a better appreciation of what is involved in doing a gable end bracing retrofit, the first section
SAMPLE INSTRUCTIONS. Best Barns USA Assembly Book. the Denver. 12'x 12' or 12'x16' Revised November 29, 2010
Best Barns USA Assembly Book Revised November 29, 2010 SAMPLE INSTRUCTIONS the Denver 12'x 12' or 12'x16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775
Belt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
General Safety. Always do a risk assessment.
recipitous.co.uk Access Equipment Call 020 8684 6999 Scaffold Towers Ladders & Steps Podiums Rigging Tube & Fittings New & Used Sales Hire Repair Manufacture The Skymaster Ladder is a 3 section combination
Installation Instructions:
Portable Guardrail System Model Numbers: 7900060, 7900061, 7900062, 7900063 Installation Instructions: Portable Guardrail System This instruction is intended to meet the Manufacturer s Instructions requirement
Assembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
Micro Cart User's Guide
Micro Cart User's Guide To take full advantage of the ergonomic features of your new Sun Mountain Micro Cart, please read the following information. SUN MOUNTAIN 1 Your Micro Cart has several innovative
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Policy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996
CITY OF SAN JOSE BUILDING DIVISION POLICY Policy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996 All new and replacement water heaters installed
ROOFING TOOLS FROM FREUND
ROOFING TOOLS FROM FREUND ROOFING TOOLS THE DESIGN OF ROOFS AND FACADES REQUIRES HIGH DEMANDS even for your tools. That s why we offer a large assortment of quality tools that are specialized and tailor-made
1/8 Stainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney 1st Edition 1/8 Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Distributed by EURO FORGINGS INC. Architectural Components for the Railing and
Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005
Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005 For ease of installation and continued enjoyment of your Andersen product,
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
ENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
CLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
Sarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover
Caution: Read entire label before using product. Do-It-Yourself PAINT RESTORER KIT Kit Contains: 1-16 oz. Water-based, Biodegradeable Liquid Prep 1-16 oz. Aerosol Shine Spray 1 - Spray Nozzle 2 - Scrub
Cable railing. Standard Cable Assemblies. Visit us online at www.geobezdan.com. Email your questions to info@geobezdan.com.
Cable railing Standard Cable Assemblies Visit us online at www.geobezdan.com. Email your questions to info@geobezdan.com. Figure 1 Figure 2 Figure 3 Figure 4 special end fittings are easy to install and
9.0 Strengthening and Bracing Gable End Walls
9.0 Strengthening and Bracing Gable End Walls Bear in mind that you may want to make the wall-to-wall connections before strengthening and bracing the gable end. This will depend on how you will be making
Wheel Accessory Products Catalog
Wheel Accessory Products Catalog Table of Contents Heavy Duty Trucks - Chrome Accessories One-Piece Hub Cover System...2 Alcoa Wheel Kits...3-4 Alcoa Hug-A-Lug Nut Covers...5-6 Heavy Duty Trucks - Maintenance
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
30 minutes in class, 2 hours to make the first time
Asking questions and defining problems Developing and using models Planning and carrying out investigations 30 minutes in class, 2 hours to make the first time 3 12 x 24 x ¾ inch plywood boards 1 x 12
Installation Guide 2010 BMW S1000RR Full Exhaust System
Installation Guide 2010 BMW S1000RR Full Exhaust System!! THIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE!! Congratulations on the purchase of your new TaylorMade
DO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD. ( See Below)
Assembly Instructions - Lancelot and Squire King Arthur s Tools (KAT) is pleased to present the first tandem mounted saw chain accessories whereby differing combinations of Lancelot and Squire may be paired
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13 (See Supplemental Instructions for trailers with heavy duty round footplates and/or Power Leveling Systems) PHONE SUPPORT
Die casting Figure M2.3.1
Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used
Installation Guide for Andersen Architectural Clad Outswing Commercial Doors
Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance
HYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
Connect. Cable preparation and cutting tools
Connect Cable preparation and cutting tools 390 Our range of cable preparation tools includes hand-operated & ratchet action cable cutting tools, wire preparation & stripping tools and SWA & hydraulic
ANYTHING ELSE IS A COMPROMISE
ANYTHING ELSE IS A COMPROMISE THE REVOLUTION BEGAN IN 1993. That s when Iron Grip transformed the fitness industry with an unwavering commitment to groundbreaking design and state-of-the-art production
Construction of a Fencing Mask
Academy of Historical Arts & HEMAC Construction of a Fencing Mask Author: Keith Farrell Version: 01 Date: 5th May 2012 Version and Copyright Information Version: 01 Date: 5th May 2012 Research: Copyright
Multi-layer Insulation Blanket for Roofs
Multilayer Insulation Blanket for Roofs Thermal Insulation in a 40mm thin, flexible, multilayer membrane Meets requirements of L1A, L1B 2010 In accordance with BR443 NHBC Acceptance Pitched & Flat roof
Gate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
HARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
CEILING SYSTEMS. Between us, ideas become reality. Installing. Suspended Ceilings. North America Version
CEILING SYSTEMS Between us, ideas become reality Installing Suspended Ceilings North America Version 1 Installing Armstrong Suspended Ceilings An Armstrong suspended mineral fiber ceiling is functional,
Ceta Form Bits & Accessories
Ceta Form industrial quality bits program helps workshops, factories, assembly lines and technicians in various trades to increase the efficiency of their businesses thanks to durability of our bits which
5-Other arc welding WELDING TOOLS AND ACCESSORIES
WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...
V O X POP MARKETING SYSTEMS
Exterior Merchandising Solutions for 2013 1-800-386-9767 www.voxpopms.com TopLine Banner Frame Rooftop Banner Display Frame There is no more effective way to display your exterior banners than above the
www.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure