About us COMPANY KEY DATA Company established in November 2003 Employment 70 persons. 12 service engineers, IT specialists y Quality management system complaisant with ISO 9001:2000 y OHSAS 18001:2007 y Certified TEMPEST secure room and staff certified to work with confidential information y Registered as NATO supplier NCAGE (NATO Commercial And Government Entity) code: 0747H SERVICES WE OFFER We are well equipped to handle any job in following areas: y maintenance & repairs services y refit / retrofit / conversions / upgrades y flying squads y turnkey projects COMPANY PROFILE ADVANTAGES y Convenient location y Understanding of ship repairand shipbuilding problems y Knowledge of complex IT environments: infrastructure & protocols y Market oriented company y Skilled, and highly motivated engineers ON-SITE CONSULTING y Operations support on-site anywhere in the world y Construction / project supervision y Problem resolution WHY WITH RMS y reasonable cost of systems installation and commissioning y flexibility and openness for customerís needs y high quality of services y direct access to manufacturers y ready to take responsibility for: full integration and start up of systems deliveries, logistics y complex scope of works (engineering, delivery, steel, hydraulic & mechanical works, cable laying, installation, start up, commissioning, after sales service MARINE ENGINEERING y Modernization and conversion of existing systems y Custom interfaces and translators for data transfer between systems y Technical consultancy y Life Cycle Cost Estimations y Classification documents y System integration y Testing and measures y Commissioning TURN-KEY PROJECTS y Engineering y Integrated Logistic and Support y Installation and commissioning y Training for operators and technicians y As build documentation y Maintenance & Calibration y Spare Parts and Spare Parts Management y After sales Service MARINE SERVICES RMS has been working since 2003 on marine services and repair projects, confirmed by a number of certificates of approval. RMS service department covers a full scope of service in the field of maintenance installation, commissioning, overhauls and repairs of the following equipment: y Instrumentation & control y Automation y Dynamic Positioning y Motors y Integrated Communication y CCTV y Signal & electrical networks y Switchboards, consoles, cabinets y Power management systems y Ballast tank measurement y Cargo control system y Propulsion control y Mechanical works y Hydraulic & pneumatic systems y Steel works Partners and Authorizations RMS is a company which has gained recognition both in shipyards and among many producers of equipment as well as in owners. We have authorizations of such marine equipment leaders as L3 Communication, Kongsberg, Schottel, Phontech, Hernis and Praxis. For some of our clients we are certified service station. Competences Below RMS main authorizations for commissioning and service: Schottel propulsion systems L3 Nautronix dynamic positioning, vessel controls L3 - SAM Electronics automation and control / navigation L3 Lyngsoe Marine automation and control Phonteh internal communication Hernis closed circuit television Kongsberg automation and control, VDR, dynamic positioning Bjorge Steinco Moland automation and control Praxis automation and control, power management Siemens automation and control, main switchboards, propulsion, power management Pronautas navigation systems
Services Fully Integrated, Tailored Systems Singe Point of Contact Project Management System Design Engineering Hardware/ Software Installation & Setting to Work FAT / Comissoning y Minimised Technical Risk y Punctual Delivery y Internationally renowed Quality (ISO 9001) y Smooth Project Implementation Low Life Cycle Cost Off-the-Shelf Equipment Proven Design Large Experience in Design and Integration REEFIT / RETROFIT / CONVERSIONS / UPGRADES RMS is capable to replace old and outdated systems with a modem, proven ship technology. Such upgrades have been proven to reduce operational costs and increase equipment efficiency. How is it made To make sure all refit installations are a success we follow a procedure consisting of four steps: 1. Site survey: Our specialist carry out a site survey and prepare a site report. The report includes a suggested system layout, a detailed project milestone plan and a cost analysis. This site report forms the basis for a delivery contract. 2. Engineering: The system is carefully tailored to meet customer requirements and is outlined in a design document for final customer and class approval. 3. Installation: is done while the ship is in service or during docking, either by our own team of technicians or the customers own staff under supervision of our engineer. 4. Commissioning & training: a team of experienced commissioning engineers make sure the system(s) are properly set to work. These engineers also take care of all needed onboard crew training. Flexibility Depending on the clientís needs we can offer tailored systems or standardized systems which may sometimes be enhanced with our own innovations. Our solutions are suited to replace existing functionality without costly redesign. Further upgrades can be done at any time. We maintain a dedicated staff of engineers who are constantly developing new functions and features for the systems. Before After Flying squads for maintenance, repairs and conversions We have a team of flying squad engineers with great experience within ship repairs during docking as well as on board repairs during vessels operation. All our engineers are English and Russian speaking and are used to work as a team as well as individual. We are used to act as authorised service as well as assist makers service engineers and have good experience with following types of machinery:propulsion control, DP, Switchboards, Instrumentation & Control, however also maintenance / repair of motors / winches / cargo handling equipment etc. are covered by our teams. We can provide comples scope of works including steel, hydraulic & mechanical works, cable laying, installation and start up. During many years of service to supply vessels we have obtained a great deal of experience with heavy anchor handling winches / electrical driven as well as hydraulic driven shark jaws, towing pins ect. Our portfolio includes vessels of all trades and sizes including drilling platforms supply vessels, research vessels, ferries, tankers, gas tankers, bulk carriers and so on.
Our activities External & Navigation Lighting Antennas: Radars, Radio, Sattelite Bridge Consoles, Navigation, IBS Communication: External & Internal DP system Cable Trays, Cable Laying, Networks Deck Equipment, Cranes CCTV Towing Pins Propulsion Cargo Control AC Control Switchboards, Power Management System Monitoring & Automation System Internal Lighting, Accomodation Electrical Eq. Tank Guaging Ballast System Fire & Gas Alarms, GA Tunnel Thrusters
Services for offshore market Rig repair facility. Remontowa, april 2011. Over the years RMS has successfully proved to be innovative and capable in the technological field of the offshore market. The most striking yet are the extensively specialized integrated automation solutions on board complex ships. Beside activity on offshore supply vessels, we also offer our technological solutions to oil and gas rigs and FPSOs
References AHTS vessels series of 21 Full scope of electrical, navigation and automation equipment turn key electrical systems delivery Stena Nautica ferry refit Alarm and monitoring system complete refit Computer network Remote gauging system MIP, VDR REM 120 Multipurpose Container Vessel (series of 8) Technical & workshop electrical design & engineering CO and CO 2 detection system LAN networks water tight door steering and signalling Propulsion electric part Power management System Ventilation Balalst System Internal communication Internal & external lighting system Mary Arctica Container vessel Alarm and monitoring system, including load monitoring, remote containers level measurement system Loading calculator Nordnes SIRI CAMPO (FPSO) Coral Methane 7500 CBM LNG / LEG / LPG Carrier Alert Rapid Intervention Vessel Workshop design Automation systems Electrical installations Deliverys ( electrical) ROV & SURVEY DP System Workshop Design Telecom package Accommodation area Automation Cargo control system Fire & Gas system Automation & Monitoring system Ballast System Ventilation Port Reval Hotel Rig Alarm system PA and telephones system Computer network (400 cabins) Television and entertaitment system (400 cabins ) Cinema and conference room (100 places) Arctic II Rig Fire & gas detection system, public adress, CCTV, computer network HIRTA Fishery Protection Vessel Internal communication Monitoring & automation Ventilation Fire & Gas system water tight door steering and signalling Propulsion electric part Power management System Teigenes Automation & Monitoring system Ballast System Ventilation Fire & Gas system Propulsion electric part Power management System Breadford Dolphin Rig Arctic IV Rig Multi-Function Tenders (Pharos & Galatea) Pearl of Scandinavia ferry Electrical Engineering Switchboards Accommodation area Public Address Computer Networks Fire & gas detection system, public adress, CCTV, computer network Workshop design Automation systems Electrical installations: LAN, DP dynamic positioning system, internal communication, remote steering system for food cold store, CCTV, Maintenance system Monitoring & automation system retrofit / upgrade Blackford Dolphin Rig Safe Bristolia Rig Finntrader / Finnpartner ferries Windsor Knutsen - DP2 shuttle tanker Workshop & as build electrical documentation Fire & Gas detection system engineering Water tight door steering and signalling Fire dampers, heating pipe systems draught measurement system internal communication propulsion electric part PMS power management system CCTV ballast automation system CCTV, gas detection, propulsion, azimuth thruster, generator sets, fire dampers Ice breaking emergency evacuation vessel (Series of 6 vessels) fire protection and gas detection system internal communication ventilation Power Management System Finnclipper ferry Electrical systems workshop design & engineering draught measurement system internal communication propulsion electric part PMS power management system ballast automation system CCTV Ventilation Mary Aura Transport vessel Propulsion electric part Power management System Automation & Monitoring Yeoman Bontrup cargo vessel Full scope of electrical works / all systems retrofit after fire.
MARINE SERVICES RMS has been working since 2003 on marine services and repair projects, confirmed by a number of certificates of approval. RMS service department covers a full scope of service in the field of maintenance installation, commissioning, overhauls and repairs of the following equipment: Instrumentation & control Automation Dynamic Positioning Motors Integrated Communication CCTV Signal & electrical networks Switchboards, consoles, cabinets Power management systems Ballast tank measurement Cargo control system Propulsion control Mechanical works Hydraulic & pneumatic systems Steel works Integrated Solution Supply Engineering Supervising and Project Management Deliveries of materials and systems Installations, cable laying, wiring Start-up & Commissioning Maintenance and service Remontowa reliability, quality and experience At Your Service. Worldwide Maintenance & repairs services Refit / retrofit / conversions / upgrades Flying squads onboard service REMONTOWA MARINE SERVICES Sp. z o.o. Na Ostrowiu 1, 80-958 Gdańsk, Poland tel. +48 58 307 22 46 fax +48 58 307 24 74 biuro@remontowa.ms www.remontowa.ms Turnkey projects