The 509F Series //5-Way Flanged Ball Valve The 509F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way valves in a process system. A standard ISO 52 pattern mounting pad allows for easy assembly of pneumatic and electric actuators. ISO 52 Mounting Pad Flanged End Construction Multi-Position Lever Handle Positioning Pin High-Cycle, Live-Loaded Stem Packing Multiple Flow Configurations Full Port Construction Standard Features and Benefits Balanced -Seat Construction Unlike two seated diverter valves, the 509F series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position. This true multiport function can reduce the number of valves required in a process system and gives engineers greater design flexibility Trunnion Mounted Ball ( /2 - ) Stem/ball isolation prevents side loading and wear of downstream seats, improving performance and service life ISO 52 Mounting Pad Standard mounting pad dimensions make it easy to assemble electric or pneumatic actuators High-Cycle, Live-Loaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs Blow-Out-Proof Stem Stem is bottom loaded to prevent removal when valve is in service Full Port Design Full port construction improves flow characteristics for greater process efficiencies Multi-Position Lever Handle The lever handle can be positioned in two (/2-2 ) or four ( - ) different orientations for greater piping flexibility 90 or 80 Actuation Stop plates are available for both 90 and 80 actuation Options - or 5-way construction with multiple flow patterns Available in standard port construction for applications where flow rates are not critical and greater economy is desired 509F Pressure / Temperature Chart Pressure (PSI) 200 000 800 00 00 200 0-20 ANSI 00 (/2-2 ) ANSI 00 ( - ) ANSI 50 (/2 - ) (RTFE Seats) 0 00 200 00 00 50 Temperature ( F) Operating Conditions Temperature range (CF Seats): -20 F ~ 20 F Maximum pressure: ANSI 50: 275 PSI WOG (/2 - ) ANSI 00: 720 PSI WOG (/2-2 ) 00 PSI WOG ( - ) Specifications All valves shell and seat tested to ANSI/ASME B. and API 598 All materials comply with applicable ASTM material specifications End connections: Flanged ends to ANSI B.5
" ~ " 2 20 5 2 A OD A Detail 2A A Valve Components # Part Name Qty. Body A5 Gr. CF8M S 2 Flange End Cap (Small) A5 Gr. CF8M 2A Blind End Cap (Large) A5 Gr. CF8M Ball SS Stem SS 5 Seat RTFE (5% C.F.) Body Seal (Small) A Body Seal (Large) 7 Thrust Washer PEEK 8 Stem Packing Set OP (B.C.) W 9 0 Packing Gland 0SS Belleville Washer 0SS M Gland Nut 0SS 5 7 2 0 8 22 2 Gland Nut Lock Washer 0SS Stop Plate 0SS Positioning Pin 0SS 5 Handle Drive Coupling 0SS F E Pipe Handle 0SS H 7 Handle Bolt 0SS 9 8 Stem Bearing PEEK - Carbon Filled 2 9 Body Bolt 0SS 20 8 20 Seat Retainer SS 2 22 2 Seat Retainer O-Ring Viton 90 Stem Set Pin SS Trunnion Bearing 7 2 25 Trunnion Seal Trunnion SS 25 2 2 2 2 Trunnion Bolt 0SS L Dimensions (Inches) Size L ANSI50 ANSI00 M H D S E F P W ISO 52 Pattern Weight (lbs) ANSI50 ANSI00 2.00 2.50 22.00 7.50 2.9 0.87 2..07.02 M0 F0 72.0 8.0 5.00 5.75 2.00 8.0.78 0.87 2..09.02 M0 F0 2.0 5.0 " CAD drawing available upon request or at www.ballvalve.com
Flow Pattern Options Way - Side, T-Port (5T) Way - Side, L-Port (5L) 0 90 A & B 02 90 B & C 0 90 C & D 0 90 D & A 2 80 A & B & C 2 80 B & C & D 80 C & D & A 80 D & A & B 2 0 90 A & B Position D Position C Way - Bottom, 80 L-Port (A) Way - Bottom, 90 Angle Port (A) 0 90 A & B 02 90 B & C 2 80 A & B & C 2 0 90 A & B Position C Way - Bottom, L-Port (A) Way - Side, Double L-Port (7D) 0 90 A & B 02 90 B & C 2 80 A & B & C 2 0 90 A & B Position C Way - Bottom, Double L-Port (Y) 5 Way - Bottom, Angle Port (8A) 0 90 A & B 0 90 A & B Way - Bottom, 80 T-Port (B) Way - Bottom, 80 Double L-Port (Y) 0 90 A & B 0 90 A & B
Direct Mount Products Automation Systems 509F Ordering Information Example: 2 Multi-Port Ball Valve with ISO 52 Pattern Mounting Pad, Lever Handle and Positioning Pin, Full Port, SS Body and Trim, RTFE (5% C.F.) Seats, Seals, ANSI 50# Flanged End Connections, -Way Side, L-Port, Flow Pattern 0* 509F D C T AA 5 L 0 Valve Series Valve Size Body End Ball Stem Seat Seal End Connect. Port Config. Ball Config. Flow Pattern* 509F - Full Port 5 7 A B C D F G I /2 / / /2 2 - A5 Gr. - A5 Gr. - A5 Gr. - A5 Gr. C - RTFE CF8M () CF8M () CF8M () CF8M () (5% C.F.) R - RTFE (5% G.F.) T - M - TFM T - M - TFM A - ANSI 50# Flanged - Way 80 Bottom - Way 90 B - ANSI 00# Bottom 5 - Way Flanged Side - Way Bottom 7 - Way Side 8-5 Way Bottom A - Bottom Y - Bottom Double L - Side D - Side Double T - Side T - Port B - Bottom T - Port 99 - Adjust in Field 00 0 02 0 0 2 2 Not available in -way Double L-port Available in -way L-port only * See Flow Pattern Options. Due to continuous product development, information may change without notice. INLINE BALLVALVE.COM INLINE INDUSTRIES, INC. 905 Garvey Avenue Rosemead, CA 9770 Tel: (800) 58-8998 (2) 8-88 Fax: (2) 8-8 www.ballvalve.com info@ballvalve.com Distributed by: 200 Inline Industries. All rights reserved. 00.