2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
|
|
|
- Heather Sparks
- 7 years ago
- Views:
Transcription
1 MEK PIPING srl Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () Tel / Fax Mob E-MIL: mekpiping@mekpiping.com P.IV
2 C ONSTRUCTION MTERIL 2 H OW TO ORDER 2 D ESIGN FETURES 3 P RODUCTS INDEX 4 CCESSORIES M OUNTING RCKETS 35 O VL FLNGES 35 LEED 35 C ONDENSING POTS 36 S YPHONS 36 IR FEED HEDERS 37 G S DISTRIUTION 37
3 DESIGN FETURES GENERL INFORMTION DESIGN FETURES 1) HNDLE Is a one piece T bar handle, as standard assembly. 2) DUST CP For protecting the stem from surrounding atmospheric conditions and prevent contamination of stem lubricant. 3) THRED USH/GLND NUT Used for adjusting stem packing and tightening the gland packing to required pressure for operating and to maintain perfect sealing. 4) LOCK NUT For locking the thread bush once the stem packing is compressed to require pressure, it also prevents loosening of bush through vibration. 5) ONNET Precision machined screwed bonnet ensures a bubble tight seal between bonnet and body. With minimum torque a bubble tight seal is achieved. The unique design eliminates all stress and ensures a high safety factor to maximum operating pressure. 6) STEM Fine machined, improved surface finish with high accuracy for smooth actuation of thread. ack seat stem can be adjusted to prevent black lash while valve is on service. 7) PCKING Stem packing is done below the threads, this prevents loss of media, threads corrosion and galling. Valves are preferably fitted with PTFE packing for temperature up to 180 C (360 F); graphoil is recommeded for temperatures over 180 C (360 F). 8) LOCK PIN Prevents accidental loosening of the bonnet from body. The bonnet lock screw or split pin is located near the bonnet and locked into the body. 9) ODY Precision machined valve bodies with a choice of end connection are provided. 10) NEEDLE The valve stem is fitted with a non-rotating plug tip. This unique design allows the plug tip to float at the end of the stem, giving perfect seal for repetitive bubble tight shut off. 3
4 1VS NEEDLE VLVE THREDED FEMLE/FEMLE 2VS NEEDLE VLVE THREDED MLE/FEMLE 3VS NEEDLE VLVE THREDED FEMLE/MLE 4VS NEEDLE VLVE THREDED MLE/MLE 5VS NEEDLE VLVE COMPRESSION FITTING 1VSP GUGE VLVE THREDED FEMLE/FEMLE 2VSP GUGE VLVE THREDED MLE/FEMLE (1/4 NPTF ) 3VSP GUGE VLVE THREDED FEMLE/MLE 5VSP GUGE VLVE THREDED MLE/FEMLE 6VSP GUGE VLVE THREDED MLE/FEMLE + TEST FLNGE (M8 ) VSPM MULTIPORT VLVE THREDED FEMLE/MLE 2VSPM MULTIPORT VLVE EXTENDED ODY THREDED FEMLE/MLE 3VSPM MULTIPORT VLVE THREDED FEMLE/FEMLE 2R1 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2R2 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2R3 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2R4 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2R5 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2R6 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2R7 2 VLVES REMOTE MOUNTING THREDED MLE/FEMLE
5 2R8 2 VLVES REMOTE MOUNTING THREDED FEMLE/MLE 2R9 2 VLVES REMOTE MOUNTING THREDED MLE/MLE 2R10 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2R11 2 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 2D1 2 VLVES DIRECT MOUNTING DIRECT/FEMLE THRED 2D2 2 VLVES DIRECT MOUNTING FLNGED/FEMLE THRED 3R1 3 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 3D1 3 VLVES DIRECT MOUNTING DIRECT/FEMLE THRED 3D2 3 VLVES DIRECT MOUNTING DIRECT/FEMLE THRED (NO S) 3D3 3 VLVES DIRECT MOUNTING FLNGED/FEMLE THRED INDEX 3D4 3 VLVES DIRECT MOUNTING FLNGED/FLNGED 3D5 3 VLVES DIRECT MOUNTING DIRECT/FEMLE THRED 3D6 3 VLVES DIRECT MOUNTING SWIVEL/MLE THRED 5R1 5 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 5R2 5 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 5R3 5 VLVES REMOTE MOUNTING THREDED FEMLE/FEMLE 5D1 5 VLVES DIRECT MOUNTING DIRECT/FEMLE THRED 5D2 5 VLVES DIRECT MOUNTING FLNGED/FEMLE THRED 5D3 5 VLVES DIRECT MOUNTING FLNGED/FLNGED 5D4 5 VLVES DIRECT MOUNTING DIRECT/FEMLE THRED
6 NEEDLE VLVE DIMENSION MODEL C 1/8" NPT F 1/4" NPT F 3/8" NPT F 1/2" NPT F 3/4" NPT F 1" NPT F 1/8" NPT F 1/4" NPT F 3/8" NPT F 1/2" NPT F 3/4" NPT F 1" NPT F 28,5 28,5 28, CONNECTIONS 1/8" NPT M 1/4" NPT M 3/8" NPT M 1/2" NPT M 3/4" NPT M 1" NPT M 1/8" NPT M 1/4" NPT M 3/8" NPT M 1/2" NPT M 3/4" NPT M 1" NPT M CONNECTIONS 6 mm.od 1/4" OD 10 mm.od 3/8" OD 12 mm.od 1/2" OD 6 mm.od 1/4" OD 10 mm.od 3/8" OD 12 mm.od 1/2" OD 2VS2 2VS4 2VS6 2VS8 2VS12 2VS16 28,5 28,5 28, VS2 3VS4 3VS6 3VS8 3VS12 3VS16 DIMENSION MODEL C 28,5 28,5 28, OPEN C DIMENSION MODEL C 4VS2 4VS4 4VS6 4VS8 4VS12 4VS16 DIMENSION MODEL C 28,5 28,5 28,5 28,5 28,5 28, ,5 84,5 :: :, ISI 316/L, Monel, Hastelloy, OPEN C 1/8" NPT M 1/4" NPT M 3/8" NPT M 1/2" NPT M 3/4" NPT M 1" NPT M 28,5 28,5 28, OPEN C 1/8" NPT F 1/4" NPT F 3/8" NPT F 1/2" NPT F 3/4" NPT F 1" NPT F DIMENSION MODEL C 5VS6mm 5VS4 5VS10mm 5VS6 5VS12mm 5VS8 OPEN C CONNECTIONS 1/8" NPT F 1/4" NPT F 3/8" NPT F 1/2" NPT F 3/4" NPT F 1" NPT F 1/8" NPT M 1/4" NPT M 3/8" NPT M 1/2" NPT M 3/4" NPT M 1" NPT M 1VS2 1VS4 1VS6 1VS8 1VS12 1VS16 CONNECTIONS OPEN C CONNECTIONS :
7 NEEDLE VLVE WITH 1/2" NPT F 1/4" NPT F 89 MODEL 1VSP8 1/2" NPT F DIMENSIONS C OPEN C CONNECTIONS 1/4" NPT F DIMENSIONS C 100 MODEL 2VSP8 1/2" NPT M 1/2" NPT F OPEN C CONNECTIONS 1/2" NPT M 1/4" NPT F 100 MODEL 3VSP8 1/2" NPT F DIMENSIONS C OPEN C CONNECTIONS 1/2" NPT M 1/2" NPT F DIMENSIONS M8 100 MODEL C 5VSP8 OPEN C CONNECTIONS 1/2" NPT M 1/2" NPT F FLNGED ø40 mm DIMENSIONS C M8 72 MODEL 6VSP8 OPEN C CONNECTIONS :: :, ISI 316/L, Monel, Hastelloy, : 7
8 MULTIPORT DIMENSIONS MODEL C 102 1VSPM8 x 3 CONNECTIONS 1/2" NPT M 3 x 1/2" NPT F OPEN C OUTL 1/2" NPT M 3 x 1/2" NPT F 180 MODEL x 3 2VSPM8 OPEN C DIMENSIONS C CONNECTIONS 1/2" NPT M 3 x 1/2" NPT F DIMENSIONS C 180 MODEL X 3 3VSPM8 CONNECTIONS :, ISI 316/L, Monel, Hastelloy, 8 OPEN C
9 2R1 OPEN FIXING HOLES Ø 6,2 17 OPEN Connections: Conexiones: Connections: : 2 valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance, ISI 316/L, Monel, Hastelloy, Estopada: Guarniture: 2R1 9
10 2R2 OPEN FIXING HOLES ß 6, OPEN Descrition: Connections: : 10 2 valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance, ISI 316/L, Monel, Hastelloy, 2R2
11 2R FIXING HOLES Ø 6, OPEN valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance Connections: :, ISI 316/L, Monel, Hastelloy, 2R3
12 2R4 OPEN 106 ß OPEN valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance, ISI 316/L, Monel, Hastelloy, 2R4
13 2R5 60 OPEN FIXING HOLES ß 6, valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance, ISI 316/L, Monel, Hastelloy, 2R5 13
14 2R6/7 2R6 2R7 OPEN 88 OPEN 88 OPEN 88 OPEN Conection: 2 valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance : 114, ISI 316/L, Monel, Hastelloy, Conection: 14 1/2 NPT-M 1/2 NPT-M 1/2 NPT-M, ISI 316/L, Monel, Hastelloy, 2R6 : 2 valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance 2R7
15 2R8/9 2R8 2R9 OPEN 88 OPEN 88 OPEN 88 OPEN Conection: valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance 1/2 NPT-M 1/2 NPT-M 1/2 NPT-M :, ISI 316/L, Monel, Hastelloy, Conection: 1/2 NPT-M 1/2 NPT-M 1/2 NPT-M 1/2 NPT-M 1/2 NPT-M 1/2 NPT-M :, ISI 316/L, Monel, Hastelloy, 2R8 2 valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance 2R9 15
16 2R10 OPEN 123 INSTRUMEN T 70 2 valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance 16 OPEN 106, ISI 316/L, Monel, Hastelloy, 2R10
17 2R FIXING HOLES Ø 6.2 OPEN ,8 OPEN 76 2 valves manifold remote mounting Manifold 2 valvulas conexiones remota Manifold 2 vannes montage à distance, ISI 316/L, Monel, Hastelloy, 2R11 17
18 2D1 76 OPEN 134 FLNGED TO OPEN valves manifold direct mounting Manifold 2 valvulas montaje directo Manifold 2 vannes montage direct flanged ( direct mounting ) bridada ( montaje directo ) bridè ( montage direct ), ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 2 7/16 UNF mounting bolts Q.ty 1 PTFE sealing ring C.tad 2 7/16 UNF bulones de montajes C.tad 1 PTFE junta de sello Q.tè 2 7/16 UNF boulon d assemblage Q.tè 1 PTFE joints de brides 18 2D1
19 2D OPEN OPEN valves manifold direct mounting Manifold 2 valvulas montaje directo Manifold 2 vannes montage direct FLNGED TO 41,3 flanged bridada bridè, ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 2 7/16 UNF mounting bolts Q.ty 1 PTFE sealing ring C.tad 2 7/16 UNF bulones de montajes C.tad 1 PTFE junta de sello Q.tè 2 7/16 UNF boulon d assemblage Q.tè 1 PTFE joints de brides 2D2 19
20 3R OPEN S 2 FIXING HOLES ß 6,2 72 OPEN valves manifold remote mounting Manifold 3 valvulas conexiones remota Manifold 3 vannes montage à distance 20, ISI 316/L, Monel, Hastelloy, 3R1
21 3D1 OPEN 140 FLNGED TO valves manifold direct mounting Manifold 3 valvulas montaje directo Manifold 3 vannes montage direct flanged (direct mounting) bridada (montaje directo) bridè (montage direct) 2 S 2 FIXING HOLES, ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 3D1 21
22 3D2 FLNGED TO 74 2 FIXING HOLES M8 X valves manifold direct mounting Manifold 3 valvulas montaje directo Manifold 3 vannes montage direct flanged (direct mounting) bridada (montaje directo) bridè (montage direct), ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 22 3D2
23 3D3 FLNGED TO FIXING HOLES Ø 6, S OPEN OPEN valves manifold direct mounting Manifold 3 valvulas montaje directo Manifold 3 vannes montage direct flanged 1/2 NPT-F bridada bridè, ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 3D3 23
24 3D4 86 FLNGED TO OPEN valves manifold direct mounting Manifold 3 valvulas montaje directo Manifold 3 vannes montage direct flanged flanged bridada bridada FLNGED TO OPEN 118, ISI 316/L, Monel, Hastelloy, es bridè bridè 86 2 S ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 24 3D4
25 3D5 FLNGED TO OPEN FIXING HOLES 20 2 S OPEN valves manifold direct mounting Manifold 3 valvulas montaje directo Manifold 3 vannes montage direct flanged (direct mounting) bridada (montaje directo) bridè (montage direct), ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 3D5 25
26 3D FIXING HOLES Ø OPEN 100 OPEN valves manifold direct mounting Manifold 3 valvulas montaje directo Manifold 3 vannes montage direct 1/2 NPT-M swivel 1/2 NPT-M racor giratorio 1/2 NPT-M 26 raccord orientable, ISI 316/L, Monel, Hastelloy, 3D6
27 5R OPEN FIXING HOLES Ø 6,2 2 S 76 5 valves manifold remote mounting Manifold 5 valvulas conexiones remota Manifold 5 vannes montage à distance OPEN 120, ISI 316/L, Monel, Hastelloy, 5R1 27
28 5R3 2 S OPEN FIXING HOLES Ø6, valves manifold remote mounting Manifold 5 valvulas conexiones remota Manifold 5 vannes montage à distance, ISI 316/L, Monel, Hastelloy, 5R3 29
29 5R S 2 FIXING HOLES ß 8,2 OPEN valves manifold remote mounting Manifold 5 valvulas conexiones remota Manifold 5 vannes montage à distance, ISI 316/L, Monel, Hastelloy, 5R2
30 5D FLNGED TO OPEN S 2 FIXING HOLES OPEN valves manifold direct mounting Manifold 5 valvulas montaje directo Manifold 5 vannes montage direct flanged (direct mounting) bridada (montaje directo) bridè (montage direct), ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 30 5D1
31 5D3 86,4 FLNGED TO 96,2 2 S OPEN 225 OPEN 140 FLNGED TO 5 valves manifold direct mounting Manifold 5 valvulas montaje directo Manifold 5 vannes montage direct flanged flanged bridada bridada bridè bridè, ISI 316/L, Monel, Hastelloy, ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 5D3
32 5D2 95 FLNGED TO FIXING HOLES Ø 6,2 OPEN valves manifold direct mounting Manifold 5 valvulas montaje directo Manifold 5 vannes montage direct flanged bridada bridè OPEN 130, ISI 316/L, Monel, Hastelloy, 88 2 S ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 5D2 31
33 N O FLNGED TO 2 S FIXING HOLES OPEN valves manifold direct mounting Manifold 5 valvulas montaje directo Manifold 5 vannes montage direct flanged (direct mounting) bridada (montaje directo) bridè (montage direct), ISI 316/L, Monel, Hastelloy, 79 OPEN IS O L TI TI L O IS O N 5D4 ccessories: (included) Q.ty 4 7/16 UNF mounting bolts Q.ty 2 PTFE sealing ring C.tad 4 7/16 UNF bulones de montajes C.tad 2 PTFE junta de sello Q.tè 4 7/16 UNF boulon d assemblage Q.tè 2 PTFE joints de brides 5D4 33
34 SUPPLY ON DEMND VENT L ISO IS OL T IO N N IO T ISO L TIO N 34 VENT ON LTI ISO ION LT ISO VENT ISO L TI ON VENT O IS ON TI L VENT
35 CCESSORIES MOUNTING RCKETS Mounting bracket is a useful accessory to install manifold and instrument on a 2 pipe stand. It is made in stainless or carbon steel and supplied with relative U-bolt, washers and nuts. CCESSORIES OVL FLNGES Oval flanges allow a simple and trouble-free manifold installation. They also provide an ideal solution in welded connection, allowing flexibility to remove the manifold by releasing the bolts. CCESSORIES LEED leed valve or screw provide an easy and economical solution for venting or bleeding. 35
36 CCESSORIES CONDENSING POTS Condensing pots are used in steam metering lines to cool and condensate steam. They are made from seamless pipe of different size ( 3, 4, 6, ), thickness ( SCH 40, SCH 80, SCH 160, ) and material ( 106 Gr., ISI 316, ). Ends connection are or SW as per Customer s specification. CCESSORIES SYPHONS Coiled pipe syphons are used for steam pressure measurement and are generally connected between pressure gauges and process tap to prevent live steam coming in direct contact with instruments. Further, these syphons allow a good heat dissipation, protecting instruments from high temperature. They are made from 1/2 seamless pipe of different thickness ( SCH 40, SCH 80, SCH 160, ) and material ( 106 Gr., ISI 316, ). Ends connection are 1/2 male and/or female ( NPT, PE, SW, ). 36
37 CCESSORIES IR FEED HEDERS ir feed headers are used to centralize several connections in instrument air distribution system. They can be supplied fitted with ball or needle valves on inlet, outlets and drain. They are made from 1 1/ 2 seamless pipe of different size thickness ( SCH 40 or SCH 80 ) and material ( 106 Gr., ISI 316, ). Caps could be welded or threaded. Ends connection number and size are as per Customer s specification. CCESSORIES Distribution manifold are suitable for a wide range of process applications in panel, cabinets and field. They are easily mounted on wall or pipe stand and they can be supplied fitted with ball or needle valves on outlets. GS DISTRIUTION TIO L ISO N ISO L TIO N They are made from bars in different material ( 106 Gr., ISI 316, ) with a working pressure up to psi. Ends connection number and size are as per Customer s specification. 37
38 NOTES
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
Block and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
MPX-Series Diesel Engine Shut Down Valves (Manual Reset / Air Pressure and Manual Closure Options)
MPX-Series Diesel Engine Shut Down Valves (Manual Reset / ir Pressure and Manual Closure Options) Selection, pplication and Maintenance Valve Numbers MPX-300 MPX-301 MPX-302 MPX-303 MPX-310 MPX-500 MPX-501
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
FRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
needle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
A global supplier of quality instrumentation/piping specification valves through product design and reliability for total customer satisfaction
Made in Britain Valves and Manifolds Double Block and Bleed Valves Monoflange Valve Chart Recorders Calibration Equipment Positioners Accessories A global supplier of quality instrumentation/piping specification
VALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
Installation, Operation and Maintenance Manual for Pilot Operated Valves
Installation, Operation and Maintenance Manual for Pilot Operated Valves Models 1400, 1420, 1430, 1460 IOM1400.0 January 2, 2014 REV A 12393 REF. ID 98136 IOM1400.0 REV. A 12541 TABLE OF CONTENTS DESCRIPTION
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
MVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types)
MVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types) Selection, pplication and Maintenance Valve Numbers MVX-301 MVX-302 MVX-303 MVX-501 MVX-502 MVX-503 MVX-801
stainless steel pre-assembled manifolds
TECHNICAL CATALOGUE stainless steel pre-assembled manifolds TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
High Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
Float and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
TY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
Diaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter
Ed.15.01 Design Diaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter Standard 4026/60H Pressure rate PN 40
Shut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
Type 3244-1 and Type 3244-7 Pneumatic Control Valves. Type 3244 1 (left) and Type 3244-7 (right) Mounting and Operating Instructions EB 8026 EN
Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 1 (left) and Type 3244-7 (right) Mounting and Operating Instructions E 8026 EN Edition July 2014 Definition of signal words DNGER! Hazardous
PLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW
Installation, Operating and Maintenance Instructions 90/4.5.5 Rev. 0 Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Table of Contents SECTION I... 2 INSTALLATION...
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
Hydraulic Jack Units. Contact Us! 888-577-EECO (3326) Delivery & Lead Times
Hydraulic Jack Units Elevator Equipment Corporation (EECO) has been manufacturing hydraulic elevator equipment since 1946, and is one of the leading suppliers in the industry for hydraulic jack units and
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
MVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
AIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
AIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.
valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A
High Flow High Pressure Solenoid Valve. Double 3/2 N.C. solenoid valve with manual override
Double 3/2 N.C. solenoid valve with manual override General The high pressure/high flow capacity solenoid valve, as not available on the market, was especially engineered by BIFFI in the early '70s for
CAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
Trunnion-Design Ball Valves
Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance
How To Replace A Reverse Osmosis Water Tank
ALL MODELS REVERSE OSMOSIS WITH NONAIRGAP FAUCET 1. Read all instructions carefully before starting installation. 2. Find the cold water line beneath your sink. The cold water is typically on the right.
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
FILLING AND PURGING THE SYSTEM
FILLING INSTRUCTIONS FOR WATER HEATER OR CONDENSING BOILER (City Water) Safety tip: Before beginning, turn off power to boiler and circulator. FILLING AND PURGING Step 1: Close Return Manifold Isolation
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and wk Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
Volkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
Fig B36 Stainless Steel 'T' Type or Basket Type Strainers
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
1998½-2007 Dodge Ram 5.9L Cummins
9 January 2014 1081130-33 Dodge Cummins Low Fuel Pressure Alarm Light Kit (I-00143) 1 1998½-2007 Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual - Part Number Sequence: 1081130
INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected)
CHRONOMITE INSTANT-FLOW WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No. Wattage
Installation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
Fire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS
CU-101 DECEMBER 3, 2015 INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS APPLICATION The FIREYE fiber optic scanners have been designed for installation on burners where movable vanes,
Ball Valves (HB Series) Catalog 4121-HB Revised, April 2005
Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the
HYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
RI27-J CNG REDUCER INSTALLATION PROVISIONS & WARNINGS
RI27-J CNG REDUCER INSTALLATION PROVISIONS & WARNINGS Rev.01.02 BIGAS INTERNATIONAL AUTOGAS SYSTEMS S.r.l. Via di Le Prata, 62/66-50041 Calenzano Firenze ITALY Tel. 0554211275 - Fax 0554215977 http: www.bigas.it
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Installation, Operating and Maintenance Instructions for AEON Metal Seated Gate Valve (MSGV) Water
1 Foreword 1.1 Thank you for choosing one of the range of AEON's BS standard valves. For safety purposes, the user shall read this instruction to fully understand the operation of the product. 2 AEON Design
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
SLAM-SHUT VALVE. Type OSE. Europe, Middle East, Africa and Asia Pacific Documents Only. Process Management TM
SLAM-SHUT VALVE Type OSE Process Management TM DESCRIPTION The purpose of the OSE slam shut valve is to totally and rapidly cut off gas flow when the outlet pressure exceeds or drops below the setting.
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
Elegant ECM. ELEGANT ECM air conditioners allow. The range is made up of 12 models: Ceiling Air Conditioner
Elegant ECM Ceiling Air Conditioner ELEGANT ECM air conditioners allow to heat and cool very economically small and medium areas, like shops, show rooms, workshops, supermarkets. The range is made up of