UTO STR with central connector Mx 5/ and 5/ landless Valves Solenoid ctuated Sub-base Mounted ISO 5599- #, #, # Non corrosive spool and sleeve for long trouble free life 6 bar (4,5 W) 4V solenoids with non-locking manual override Robust metal Mx connector with 5 pin Solenoids with surge surpression and L indicator Wide range of sub-bases and accessories Technical data Medium: ompressed air, 40µm filtered, lubricated or non-lubricated Operation: landless spool valve, solenoid pilot actuated Mounting: On sub-bases Operating pressure (maximum pressure): 6 bar solenoid pilot actuated valves etails of minimum and maximum pilot pressure see overleaf. low characteristics (unregulated): Size unction b l/min v Kv ISO # 5/ 5,50 0,06 9,70 0,0,08 ISO # 5/ P 5,70 0,4,4 0,5,5 ISO # 5/ 0,70 0, 9,0 450,45,6 ISO # 5/ P 0,7 0,6 40,40 50,57,0 ISO # 5/ 9,00 0,4 70,45 4400 4,48,84 ISO # 5/ P 9,84 0,6 74,54 4650 4,74 4,06 mbient temperature: -* to +50 solenoid pilot actuated valves *onsult our Technical Service for use below +. Materials ie-cast aluminium body. Hard anodised, teflon coated, matched aluminium spool and sleeve. Viton and nitrile rubber static seals. Zinc die-cast locking plate. POM and P plastic parts. Zinc plated screws. Ordering information To order select model from page 5.4.89.0 e.g. SX957-87-M for a 5/ solenoid pilot / spring returned ISO # valve with internal pilot air supply. /05 N/UK 5.4.89.0
UTO*STR with central connector Mx 5/ Solenoid Pilot ctuated Valves Symbol Model ISO Size Pilot Supply Operator 4 4 4 84 5 4 4 84 5 /4 4 4 84 5 8 4 4 84 5 8 /4 4 4 84 5 8 4 4 84 5 8 /4 Return Operating pressure bar Pilot pressure bar SX957-87-M # 0,40 SX9574-87-M # Internal Solenoid Spring.8-6 - 0,66 SX9575-87-M # 0,9 SX957-876-M # 0,40 SX9574-876-M # xternal Solenoid Spring -0.9-6.8-6 0,66 SX9575-876-M # 0,9 SX057-850-M # 0,60 SX0574-850-M # Internal Solenoid Solenoid - 6-0,87 SX0575-850-M #, SX057-855-M # 0,60 SX0574-855-M # xternal Solenoid Solenoid -0.9-6 - 6 0,87 SX0575-855-M #, SX57-850-M # 0,60 SX574-850-M # Internal Solenoid Solenoid - 6-0,87 SX575-850-M # (Priority), SX57-855-M # 0,60 SX574-855-M # xternal Solenoid Solenoid -0.9-6 - 6 0,87 SX575-855-M # (Priority), Weight kg 5/ Solenoid Pilot ctuated Valves Symbol Model ISO Size Valve unction 4 4 84 5 8 4 4 84 5 8 /4 4 4 84 5 8 4 4 84 5 8 /4 4 4 84 5 8 4 4 84 5 8 /4 Pilot Supply Operator 4 Return Operating pressure bar Pilot pressure bar SX967-850-M # 0,60 SX9674-850-M # P Internal Solenoid Solenoid - 6-0,87 SX9675-850-M #, SX967-855-M # 0,60 SX9674-855-M # P xternal Solenoid Solenoid -0.9-6 - 6 0,87 SX9675-855-M #, SX977-850-M # 0,60 SX9774-850-M # O Internal Solenoid Solenoid - 6-0,87 SX9775-850-M #, SX977-855-M # 0,60 SX9774-855-M # O xternal Solenoid Solenoid -0.9-6 - 6 0,87 SX9775-855-M #, SX987-850-M # 0,60 SX9874-850-M # OP Internal Solenoid Solenoid - 6-0,87 SX9875-850-M #, SX987-855-M # 0,60 SX9874-855-M # OP xternal Solenoid Solenoid -0.9-6 - 6 0,87 SX9875-855-M #, Weight kg lectrical details for solenoid operators Voltage / Power 4V / 4,5 W Spare coil TM 60 Voltage Tolerance +/- 0% Rating 00% ontinous uty Surge Surpression Varistor Indication reen L lectrical onnection Mx with 5 pin Pin ssignment 5 pin (see drawing) Protection lass IP 65 with sealed plug (ISO 695) Manual Override Push to operate spring return Inlet Orifice,0 mm Pin assignment (acc. VM 457) Pin no. unction not used Signal for solenoid ommon for solenoid and 4 4 Signal for solenoid 4 5 round ( mm longer than pin 4) 4 5 N/UK 5.4.89.0 /05
UTO*STR with central connector Mx Options selector SX 7-8 - M Valve function Substitute 5/ solenoid/solenoid *) 05 5/ solenoid (priority side 4)/solenoid *) 5 5/ solenoid/spring *) 95 5/ P solenoid/solenoid *) 96 5/ O solenoid/solenoid *) 97 5/ OP solenoid/solenoid *) 98 ISO size Substitute ISO (NW 8) ISO (NW ) 4 ISO (NW 6) 5 Pilot supply (digit 0) Substitute Internal pilot supply (double sol valve) 0 Internal pilot supply (single sol valve) xternal pilot supply (double sol valve) 5 xternal pilot supply (single sol valve) 6 Regulation (digit 9) Substitute Without regulation (double sol valve) 5 Without regulation (single sol valve) 7 *) = substitute 5 on digit 9/substitute 0 or 5 on digit 0 *) = substitute 7 on digit 9/substitute or 6 on digit 0 P = all ports blocked O = centre open exhaust OP = centre open pressure Ordering example Top order a 5/ glandless valve UTO*STR, with P function, internal pilot supply (double sol valve) and size ISO quote: SX967-850-M Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORRN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. /05 N/UK 5.4.89.0
UTO*STR with central connector Mx Sub-bases and end plates VM 445 sub-base options orm Single station sub-base side ported orm Single station sub-base bottom ported orm Modular sub-base orm nd plates orm onnecting plate Page 7 Page 7 Page 7 Page 7 Page 8 ISO# M/P96 (/4) M/P95 (/4) QM/5// QM/5// P 86 ISO# M/P9 (/8) M/P9 (/8) QM/5// QM/5// P 846 ISO# M/P98 (/) M/P97 (/) QM/54// QM/54// P 856 Universal base options Modular sub-base (side & bottom ported) nd plates *) nd plate, end ports open Page 8 Page 8 Page 8 ISO# QM/5//7 (/4) QM/5//8 (/8) QM/5// (/8) ISO# QM/5//7 (/8) QM/5//8 (/) QM/5// (/) *) ll ports supplied blanked for optimum system configuration. ccessories lanking plate for VM and universal sub-bases lanking disc for VM sub-bases *) lanking disc for universal sub-bases *) Transition plate for VM sub-bases Transition plate for universal sub-bases Page 8 Page 8 Page 8 Page 0 Page 0 ISO# QM/5// P 88 M/P47 QM/5//4 (#-#) QM/5//9 (#-#) ISO# QM/5// P 848 M/P474 QM/5//4 (#-#) ISO# QM/54// P 858 *) or Multipressure systems. Sandwich plates Single pressure regulator plate, regulator on side Single pressure regulator plate, regulator on side 4 Single pressure regulator plate Single pressure regulator plate ouble pressure regulator plate Page 9 Page 9 Page 9 ISO# V70-K Port reg. V700-K Port reg. V70-K Port reg. V70-K Port 4 reg. V70-K4 Ports +4 reg. ISO# V70-K Port reg. V700-K Port reg. V70-K Port reg. V70-K Port 4 reg. V70-K4 Ports +4 reg. ISO# V70-K Port reg. V700-K Port reg. V70-K Port reg. V70-K Port 4 reg. V70-K4 Ports +4 reg. Page 9 Page 9 low regulator plate Sandwich plate with deblocable non-return valve Sandwich plate with additional pressure port Sandwich plate with additional pressure port, pilot air 4 from port Page 0 Page 0 Page 0 Page 0 ISO# P 7050 P 705 P 705 ISO# QM/54//6 P 7070 P 707 P 707 N/UK 5.4.89.04 /05
UTO*STR with central connector Mx Valve dimensions SX957-87*-M models Single Solenoid Valves ISO # SX9*7-85*-M models ouble Solenoid Valves ISO # M x M x 7,5 60 4 M 5 6 4 0 6 M 5 00 7,5,5 8 60 4 7 8 SX9574-87*-M models Single Solenoid Valves ISO # SX9*74-85*-M models ouble Solenoid Valves ISO # M x 4,5 08,5 0 0 00 M 6 7,5 48 0 8 55 0 8 4 7,5 8 Manual override irection of cable outlet M x 08 0 5,5 M 6 7 48 0 8 55 4 5 4 Manual override irection of cable outlet /05 N/UK 5.4.89.05
UTO*STR with central connector Mx SX9575-87*-M models Single Solenoid Valves ISO # SX9*75-85*-M models ouble Solenoid Valves ISO # M x M x 4,5 M 8,5 00 64 0 4 09,5 5 M 8,5 65,5 64 0 48 6,5 49 6,5 4 09,5 65 Manual override irection of cable outlet N/UK 5.4.89.06 /05
UTO*STR with central connector Mx Sub-bases and end plates VM 445 sub-base options Single station sub-base side ported (orm ) d h 4 4 d 5 I Single station sub-base bottom ported (orm ) d L8 L6 d L L9 L7 L0 L L9 L0 L7 5 4 4 d L6 d L8 h4 b h d4 h b h b h b h Model ISO b d d d h h h M/P96 48 5,5 /4 /8 0 0,5 (,5) M/P9 57 6,6 /8 /8 40 4 (6) M/P98 7 6,6 / /8 8 79 Model ISO b b b d d d d4 h M/P95 46 7 5,5 /4 /8 5,5 0 M/P9 56 8 7 6,6 /8 /8 6,6 5 M/P97 7 0 4 6,6 / /8 6,69 Model ISO h4 L L6 L7 L8 L9 L0 kg M/P96,5 0 4 4 58 98 84 0,6 M/P9 0 4 0 56 74 95 0,8 M/P98 49 68 90 6 9 0,6 ( ) imension for ports and 5. Model ISO h h L L6 L7 L8 L9 L0 kg M/P95 0 5 0 46 6 98 84 0,9 M/P9 6,5 4 8 56 7 95 0, M/P97 8 9 49 4 68 90 6 9 0,40 Modular sub-bases (orm ) & end plates (orm ) K + (n + ) + (n + ) /8 h 5 4 4 5 4 L5 J H L L M L5 d6 h h4 Model ISO H I kg QM/5// 44 4,5 7,5 8 7 0,4 QM/5// 5 6 56 5 6 6 5 9 0,6 QM/54// 60 0 7 5 6 8 0 5 0,7 Model ISO J K L M h h h4 L L5 d6 kg QM/5// 85 8,5 6 /4 46 4 0 8 /8 0, QM/5// 00 9 0 /8 47 4 5 8 / 0,4 QM/54// 40 0 8 / 56 4 90 5 0,66 /05 N/UK 5.4.89.07
UTO*STR with central connector Mx Universal base options onnecting plate (orm ) M Q K L J R Model ISO H I J P 86 /4 9 5,5 0 7,5 7 0 P 846 /8 6,5 5 6 86 5 4 P 856 / 7 9 5 9 8 0 90 7 H O N Model ISO K L M N O P Q R kg P 86 7 5 4,5 95,4 5,5 0,40 P 846 40 6 9 55 5 5,4 7 0,69 P 856 45 9 6 70 6 68,4 9,40 P I Modular sub-base (side & bottom ported) N M nd plates ll ports blocked - QM/5//8, QM/5//8 Side ports open - QM/5//, QM/5// K J 4 4 H /5 /5 Q S /5 /5 P /5 /5 L O R T Model ISO H J K L M N kg QM/5//7 06 4 6 9 5,5 /4 /8 8 64 8 0,6 QM/5//7 0 56 4 0 6,5 /8 /8 4 68 9 5 8 0,5 Model ISO 0 P Q R S T kg QM/5//.. 06 6 9 5,5 /8 /4 5 44 9 0, QM/5//.. 0 46 0 6,5 9 / /4 58 7 0, lanking plate for VM & universal sub-bases lanking disc for ISO # to ISO # L h h h b Type ISO b L h h h kg QM/5// 4 80 4 0,05 QM/5// 55 85,5,5,5 0,09 QM/54// 70 0,5,5 5,5 0,6 N/UK 5.4.89.08 /05
UTO*STR with central connector Mx Sandwich plates Single pressure regulator plate with pressure regulator on port Regulator on side Regulator on side 4 Model ISO kg V70-K 4 49 8 98 0 45 4 0,70 V70-K 4 49 8 56 60 54,70 V70-K 4 49 46 85 67 64,00 Model ISO kg V700-K 4 49 8 98 0 45 4 0,70 V700-K 4 49 8 56 60 54,70 V700-K 4 49 46 85 67 64,00 Single pressure regulator plate with pressure regulator on port or port 4 Port reg. Port 4 reg. Model ISO kg V70-K 4 49 8 98 0 45 4 0,70 V70-K 4 49 8 56 60 54,70 V70-K 4 49 46 85 67 64,00 Model ISO kg V70-K 4 49 8 98 0 45 4 0,70 V70-K 4 49 8 56 60 54,70 V70-K 4 49 46 85 67 64,00 ouble pressure regulator plate with double pressure regulator on port and 4 View (without gauge and tube) Model ISO kg V70-K4 4 49 8 90 0 45 4,0 V70-K4 4 49 8 59 60 54,90 V70-K4 4 49 46 46 67 64,40 Model with centre back gauge Model with bottom gauge aptive screws M5 x 0 /05 N/UK 5.4.89.09
UTO*STR with central connector Mx Transition plate from ISO # to ISO # for universal sub-bases QM/5//9 (0, kg) low regulator plate Sandwich plate with deblocable non-return valve open closed Transition plate from ISO # to ISO # and ISO # to ISO # for VM sub-bases 4 4 Model ISO kg P 7050 96 5 4 7 0,45 P 7070 65 95 6 8,5,05 Sandwich plate with additional pressure port Sandwich plate with additional pressure port pilot air 4 from port H H 4 46 0 46 Type ISO kg QM/5//4 # to # 5 M5 0,5 QM/5//4 # to # 40 M6,5 0,65 Model ISO kg QM/54//6 4 9 8,5 6,5 4 0,86 Model ISO H kg P 705 8 7 M5 0 /4 7 4 84 0,4 P 707 9 8,5 M8 9 /4 9,5 6 48,00 Model ISO H kg P 705 8 7 M5 0 /4 7 4 84 0,4 P 707 9 8,5 M8 9 /4 9,5 6 48,00 N/UK 5.4.89.0 /05