UNINTERRUPTIBLE SUPPLY GUARANTEED ENERGY ABSOLUTE EFFICIENCY THE GLOBAL SPECIALIST IN ELECTRAL AND DIGITAL BUILDING INFRASTRUCTURES
INDEX General Features page 4 Modular page 12 Conventional page 32 Line Interactive page 44 Accessories Communication page 50 Services page 56 WWW..LEGRAND.COM INDEX 3
VDI STRUCTURED CABLES ELECTRICAL PROTECTION LIGHTING MANAGEMENT HOSPITAL SIGNALLING ENERGY MANAGEMENT 4
TERTIARY A PROPOSAL FOR THE BUILDING IN CONTINUOUS EVOLUTION MEASUREMENT SYSTEMS ENERGY DISTRIBUTION UNINTERRUPTABLE SUPPLY SYSTEM SUPERVISION FIRE ALARM SYSTEMS A guarantee of the highest level in Business Continuity LEGRAND, worldwide leader in manufacturing electrical equipment, offers a wide range of solutions for the tertiary sector fit to satisfy system requirements: from data network cable systems, and conduit and distribution systems, to system control and management. TODAY, with an eye on technological development that respects the environment and responds to a continuously evolving market, LEGRAND proposes a new range of. A complementary range of technological functions to guarantee maximum protection in all systems. WWW..LEGRAND.COM GENERAL FEATURES 5
6 Energy efficiency and savings
maximum quality of energy output High efficiency with cutting-edge manufacturing characteristics that make it possible to obtain efficiency up to 95% for a significant energy and economic savings. Evolved technology Products with double conversion ONLINE technology capable of re-phasing the power supply system and guaranteeing maximum quality of usable energy. Environmentally friendly products Efficient manufactured giving them maximum attention. In a development view that is environmentally friendly, LEGRAND developed an innovative test system that drastically reduces energy consumption for each machine produced. WWW..LEGRAND.COM GENERAL FEATURES 7
8
reliability and safety Technological excellence of the uninterruptible power supplies Reliable electronics Optimum sizing for power stages and extensive, in-depth tests guarantee a notable level of reliability. Components of latest generation Careful research for the best electronic components present on the market, combined with the most modern production methods, make Legrand extremely reliable machines and in step with the times. High performance Batteries Batteries supplied with Legrand are the best available on the market. An innovative charging system significantly extends battery life, even by 50% WWW..LEGRAND.COM GENERAL FEATURES 9
THE RANGE OF p12 MODULAR p32 CONVENTIONAL up to 120kVA with the maximum degree of redundancy (power and control) suitable for applications where expansion flexibility and quick maintenance are required. up to 10kVA guarantee a power supply system that is safe and reliable. 10
Calibrated solutions for every context LEGRAND proposes a range of divided into 3 different types. An offering for all application environments with solutions that guarantee maximum protection in terms of power and uptime. With LEGRAND it is possible to obtain the correct solution for every need. p44 LINE INTERACTIVE p50 COMMUNICATION ACCESSORIES up to 3 kva entry level, they are ideal protection for work station, telephone switchboards, home automation applications and small tertiary. A complete range of communication devices allows you to remotely manage, configure and control the. WWW..LEGRAND.COM THE RANGE OF 11
12
MODULAR MEGALINE TRIMOD ARCHIMOD Flexible, expandable and redundant solutions Allows to size the on a needs-basis and allows for future implementations. They are made of «STANDARD» modules that can be added to existing machines in order to expand both power and uptime. They guarantee maximum levels of redundancy thanks to the innovative three-phase system made of individual single-phase modules. WWW..LEGRAND.COM MODULAR 13
ARCHIMOD AND TRIMOD DYNAMIC THREE-PHASE SYSTEMS with exclusive technology capable of adapting to all types of systems in the best possible way. These machines have an innovative modularity concept that optimizes the availability of power, increases system flexibility and reduces the total cost of operation (TCO). Highly standardised structures, made of individual single-phase modules, guarantee the highest levels of granularity on the market. 14
ARCHIMOD and TRIMOD have received from FROST & SULLIVAN the prestigious prize Product Differentiation Excellence award 2011 for the EMEA area. Granularity of power Three-phase are composed of redundant and self-configuring individual single-phase modules for fast and safe power increases. Optimisation of interventions Transport, installation and maintenance interventions are easier to manage with power modules given their reduced dimensions and weight (only 8.5 kg). FLEXIBILITY MODULARITY SCALABILITY ARCHIMOD AND TRIMOD WWW..LEGRAND.COM MODULAR 15
ARCHIMOD AND TRIMOD EXCLUSIVE FEATURES Power scalability Power expansion, for both product families, can always be obtained within the same cabinet in an extremely simple and immediate manner, without the need to re-configure the system and. TRIMOD 10 to 60 kva ARCHIMOD 20 to 120 kva Scalability uptime 16 Based on power and the request for uptime, expansion may take place both in the same cabinet, adding battery slots or in additional battery cabinets. Compact non modular battery cabinets that further extend uptime reaching a level of hours, are also available.
Redundancy on the single-phase load R S T R S T In a system with three-phase power supply and single-phase load, if one of the power modules breaks down, there is no power loss since it is supplied by the other operating modules. LOAD KO LOAD Redundancy on the phases R S T R S T In a system with three independent outputs, redundancy can be set on individual phases. If one of the power modules breaks down, modules of the same phase make up for the absence of the faulty module. L1 L2 L3 KO L1 L2 L3 Redundancy on control R S T R S T In composed of several control modules, if one of them breaks down, only the modules controlled by it will shut-down. Lost power, however, is automatically redistributed to other modules to guarantee service continuity. KO R S T R S T MODULAR THREE-PHASE Maximum levels of redundancy Thanks to modular construction technology, various redundancy levels can be set to always guarantee maximum service continuity. WWW..LEGRAND.COM MODULAR 17
Efficiency up to 95% when in ON LINE MODE ARCHIMOD MODULAR THREE-PHASE Standard modules with self-configurable Plug&Play system Power factor close to 1 at input Multi IN/OUT to obtain different three-phase or single-phase configurations ON SITE ARCHIMOD is the with a modular and expandable architecture with power from 20 to 120kVA, in 19 inch rack cabinet. The system is made from a set of standard and pre-assembled components that allow simplifying and speeding up the design and completion process for infrastructures. 18
MODULAR ARCHITECTURE 6 1 Control logics Equipped with microprocessor, it manages 3 power modules.if combined with a power expansion module, it can manage up to 6 power modules, thus increasing power from 20 to 40kVA. It comes equipped with a multifunction display and keyboard to monitor operating parameters, and to configure numerous functions. It can be connected in parallel to other control modules and with power modules. On the front side, there is a backlit status indicator to immediately identify the system s operation status, and an RS232 communication port for maintenance. 1 2 Power modules Power modules, with power equal to 6.7 kva, are extremely compact and easy to move. Equipped with a plug-in and real hot-swap system, installation and maintenance is quick. They work in parallel with all modules to guarantee maximum system performance. 3 Power expansion module It must be combined with a control module. Power can be increased from 20 to 40 kva, and redundancy on single-phase can be set. 4 Battery module Each module has batteries that can be connected to others in series, creating independent strings. The compactness and functionality of individual modules (plug-in) means they can be easily moved and expanded without changing the installed solution (flexibility and scalability). 5 Distribution can be configured directly on site into different distribution systems (three-three, three-single, single-single and single-three). Inside there are terminal blocks for in-out connection, movement and protection components, and the predisposition for additional battery cabinets. Power supply can be configured on two separate input networks (primary and emergency by-pass). 6 Input cable Input cable compartments allow inserting in-out connection cables at both the top and bottom. 4 2 3 5 6 WWW..LEGRAND.COM MODULAR 19
Modular and upgradable with power from 10 to 60kVA in compact structures with a reduced footprint. TRIMOD MODULAR THREE-PHASE The completely modular structure enables programming each individual power module in order to obtain the desired input/output configuration. It is possible to manage three-phase or single-phase output and input voltage in order to choose, 3-3 phases, 3-1 phases, 1-3 phases and 1-1 phase. Furthermore, it is possible to obtain single-phase and three-phase output lines simultaneously or two or more single-phase lines, even of different power levels (upon request). Control display The TRIMOD system is completely managed by a microprocessor and using the keyboard on the LCD display it is possible to: - set and view operational data in real time - configure and control parameters for each power module - access event logs - complete functional tests Compact and reduced footprint versions The compact dimensions, the vertical build of the structure and 2 small wheels located in the rear help with positioning and transporting the, even in rooms that are not easy to access. 20
Modular redundant and upgradable up to 10kVA with perfomance and functions at the top of their category MEGALINE MODULAR SINGLE-PHASE THEY ARE AVAILABLE IN THREE FORMATS: - SINGLE CABINET; - DOUBLE CABINET; - 19 INCH RACK. All models have a microprocessor control card that can be configured on the display, by modules powered by 1250 VA each, and by battery kits that contain no. 3x9Ah batteries. The single cabinet and 19 inch rack models issue a power from 1250 to 5000 VA, they can house a maximum of 4 power boards and 4 battery kits. Additional batteries can be stored in specific cabinets, which can be easily connected thanks to an uptime upgrading pre-setting. The range is completed with products made of two cabinets; the first cabinet can house up to 8 power modules, each up to 1250 VA, reaching a maximum power of 10kVA. In the second cabinet it is possible to insert up to 10 battery kits and an additional battery charger. Other battery cabinets identical to the one supplied can be added in order to further upgrade uptime. WWW..LEGRAND.COM MODULAR 21
ARCHIMOD Modular three-phase with double conversion VFI CONFIGURATIONS 20 Power: 20 kva Uptime (80% of the load): 1h 1 Cabinet 1 Control module 3 Power modules 30 Battery modules 1 Distribution modules 40 Power: 40 kva Autonomy (80% of the load): 20 min 1 Cabinet 2 Control modules 6 Power modules 24 Battery modules 1 Distribution modules 3 108 55 3 104 54 Pack. Item CONFIGURABLE CABINETS The cabinets are supplied empty and are pre-set for power and uptime as indicated in the table NOMINAL KVA NO. BATTERY MODULES NO. MODULES FOR CONTROL NO. MODULES FOR EXPANSION NO. PHASES 3 104 51 * 20 12 1-3-1/3-3 3 104 52 20 30 1-3-1/3-3 3 104 53 40 24 2-3-3/3-3 3 104 54 60 18 3-3-3 3 104 55 80-3 1 3-3 3 104 56 100-3 2 3-3 3 104 57 120-3 3 3-3 * cabinet with 18 rack units available 3 108 40 60 Power: 60 kva Uptime (80% of the load): 6 min 1 Cabinet 3 Control modules 9 Power modules 18 Battery modules 1 Distribution modules 80 Power: 80 kva Autonomy (80% of the load): 12 min 2 Cabinets 3 Control modules 1 Power expansion module 12 Power modules 36 Battery modules 1 Distribution modules ADDITIONAL CABINETS FOR BATTERIES DESCRIPTION 3 108 18 Empty modular battery cabinet 3 108 21 Battery cabinet for 20kVA with 21 94 Ah long life batteries 3 108 22 Battery cabinet for 40-60kVA with 21 94 Ah long life batteries 3 108 23 Battery cabinet for 80kVA with 21 94 Ah long life batteries 3 108 24 Battery cabinet for 100-120kVA with 21 94 Ah long life batteries 3 108 65 Cover for closing empty battery slots 3 108 66 Cover for closing empty power module slots 100 Power: 100 kva Autonomy (80% of the load): 10 min 2 Cabinets 3 Control modules 2 Power expansion modules 15 Power modules 36 Battery modules 1 Distribution modules 120 Power: 120 kva Autonomy (80% of the load): 6 min 2 Cabinets 3 Control modules 3 Power expansion modules 18 Power modules 36 Battery modules 1 Distribution modules ACCESSORIES DESCRIPTION 3 108 40 6.7kVA power module 3 108 64 Front/rear closing door 3 108 55 Kit of 3x9Ah battery slots 3 108 56 Kit of 3 empty battery slots NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 22
ARCHIMOD Modular three-phase with double conversion VFI Idem General features Input features Output features Batteries Configuration and management Physical features Environmental conditions Conformity Services 3 104 51 3 104 52 3 104 53 3 104 54 3 104 55 3 104 56 3 104 57 Nominal Power (kva) 20 40 60 80 100 120 Active power (kw) 18 36 54 72 90 108 Module Power (kva) 6.7 for the Power Module (20kVA with 3 Modules), power factor 0.9 Technology System Hot Swap capacity On-Line Double Conversion VFI-SS-111 Modular, expandable and redundant system in just one 19 rack cabinet Possibility of replacing the power modules and/or battery without turning off the Input voltage 230V 1F+N, 400V 3F+N 400V 3F+N Input frequency Input Voltage Range Compatibility with Power-Supply Units 230V +15%/-20% 1F 400V +15%/-20% 3F 50-60 Hz ±2% Autosensing THD Input Current 3% 400V +15%/-20% 3F Configurable in order to achieve synchronism between input and output frequencies, even for wider frequency ranges, ±14% Input Power Factor 0,99 Output voltage 230V 1F, 400V 3F 400V 3F Performance at Full Load 95% Nominal output frequency 50/60 Hz ±0.1 Crest Factor 3,5:1 Output Voltage Tolerance ±1% Allowed Overload 10 minutes at 125% and 1 minute at 150% Performance in Eco Mode 99% Bypass Battery Module Battery Series Type/Voltage Uptime Battery Charge Display and Signals Communication Ports Emergency Power Off (EPO) Remote Management Dimensions (H x W x D) (mm) Automatic and maintenance bypass The battery modules are designed to easily be fitted inside the cabinet. No particular operation is necessary to connect them VRLA - AGM / 252 Vdc Configurable and expandable both internally and with additional battery cabinets Smart Charge technology. 3-stage advanced cycle 4 lines/20 characteristics, 4 buttons for menu navigation, multi-colour LED status indicator 2 RS232 serial ports, 1 Logical gate, 5 ports with dry contacts, 2 slots for SNMP interfaces (optional) Yes Available 2080 x 570 x 912 (42U) Installed Power Modules 3 6 9 12 15 18 Installable Battery Slots Up to 30 Up to 24 Up to 18 - - - Operating Temperature/Humidity Net Weight (kg) 205 240 276 272 318 364 Degree of protection 0-40 C / 20-80% non-condensing Maximum Audible Noise at 1 m from the Unit (dba) 50 65 Heat Loss (BTU/h) 2730 5460 8190 10920 13650 16380 IP21 Certifications EN 62040-1, EN 62040-2, EN 62040-3 Standard Warranty Installation Maintenance 2-year warranty Can be performed by the user, modular architecture with "plug and play" power and battery modules for easy installation and configuration Can be performed by the user, optional services available from the manufacturer WWW..LEGRAND.COM MODULAR 23
TRIMOD Modular three-phase with double conversion VFI Pack. Item CABINETS NOMINAL KVA ACTIVE KW UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 98 10 9 0' 1 120 3 104 04 15 13,5 0' 1 120 3 104 10 20 18 0' 1 120 3 104 16 30 27 0' 1 146 3 104 21 40 36 0' 1 146 3 104 28 60 54 0' 1 165 3 103 99 Pack. Item NOMINAL KVA 3 108 40 3 108 43 UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 99 10 11' 1 167 3 104 00 10 17' 1 223 3 104 01 10 35' 1 279 3 104 00 + 3 107 57 10 54' 2 471 3 104 00 + 3 107 58 10 68' 2 527 3 104 05 15 13' 1 220 3 104 06 15 21' 1 279 3 104 06 + 3 107 60 15 33' 2 413 3 104 06 + 3 107 63 15 57' 2 550 3 104 04 + 3 108 08 15 109' * 2 865 3 104 11 20 9' 1 220 3 104 12 20 14' 1 279 3 104 12 + 3 107 58 20 35' 2 572 3 104 12 + 3 108 08 20 81' * 2 865 3 104 12 + 2 x 3 107 58 20 59' 3 574 3 104 16 + 3 107 57 30 6' 2 378 3 104 16 + 3 107 58 30 12' 2 434 3 104 16 + 3 108 09 30 50' * 2 890 3 104 16 + 2 x 3 108 09 30 109' * 3 1645 3 104 21 + 3 107 63 40 8' 2 564 3 104 21 + 2 x 3 107 58 40 16' 3 801 3 104 21 + 3 108 10 40 33' * 2 925 3 104 21 + 3 x 3 107 59 40 38' 4 439 3 104 21 + 4 x 3 107 64 40 60' 5 1663 3 104 21 + 3 x 3 108 10 40 120' * 4 2430 3 104 28 + 2 x 3 107 58 60 9' 3 830 3 104 28 + 2 x 3 107 64 60 15' 3 942 3 104 28 + 3 108 11 60 17' * 2 952 3 104 28 + 3 x 3 107 64 + 3 107 60 60 32' 5 1579 3 104 28 + 2 x 3 108 11 60 50' * 3 1715 3 104 28 + 3 x 3 108 11 60 80' * 4 2474 3 104 28 + 4 x 3 108 11 60 110' * 5 3234 * Configurations with battery cabinets (20 x 94 Ah). Battery cabinet dimensions and weight: A x L x P 1635 x 600 x 800 (mm), 785 kg CABINETS (EMPTY) NO. MODULES NO. BATTERY MODULES MODULE TYPES NO. PHASES 3 104 36 3 12 3 x 3,4 kva 1-1 / 3-3 / 3-1 / 1-3 3 104 37 3 12 3 x 5 o 6,7 kva 1-1 / 3-3 / 3-1 / 1-3 3 104 38 6-6 x 3,4 kva 3-3 3 104 39 6-6 x 5kVA 1-1/3-3/3-1/1-3 3 104 40 6-6 x 6,7kVA 3-3 3 104 41 9-9 x 6,7kVA 3-3 ACCESSORIES DESCRIPTION 3 108 36 Power module 3.4 kva 3 108 38 Power module 5 kva 3 108 40 Power module 6.7 kva 3 108 51 Additional 5kVA battery charge module for expansions ACCESSORIES FOR BATTERIES DESCRIPTION 3 108 54 Kit of 4 empty battery slots 3 108 43 Single slot with 5x7,2Ah batteries (installable in multiples of 4) 3 108 45 Single slot with 5x9Ah batteries (installable in multiples of 4) ADDITIONAL BATTERY CABINETS DESCRIPTION 3 108 05 Modular battery cabinet (empty) with 16 trays 3 108 06 Modular battery cabinet (empty) with 20 trays 3 107 55 Modular battery cabinet with 4 battery trays (7.2 Ah) 3 107 56 Modular battery cabinet with 8 battery trays (7.2 Ah) 3 107 57 Modular battery cabinet with 12 battery trays (7.2 Ah) 3 107 58 Modular battery cabinet with 16 battery trays (7.2 Ah) 3 107 59 Modular battery cabinet with 20 battery trays (7.2 Ah) 3 107 60 Modular battery cabinet with 4 battery trays (9 Ah) 3 107 61 Modular battery cabinet with 8 battery trays (9 Ah) 3 107 62 Modular battery cabinet with 12 battery trays (9 Ah) 3 107 63 Modular battery cabinet with 16 battery trays (9 Ah) 3 107 64 Modular battery cabinet with 20 battery trays (9 Ah) 3 108 07 10kVA battery cabinet for with 20, 94 Ah long life batteries 3 108 08 20kVA battery cabinet for with 20, 94 Ah long life batteries 3 108 09 30kVA battery cabinet for with 20, 94 Ah long life batteries 3 108 10 40kVA battery cabinet for with 20, 94 Ah long life batteries 3 108 11 60kVA battery cabinet for with 20, 94 Ah long life batteries 24 NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions.
TRIMOD Modular three-phase with double conversion VFI Item 3 103 98 3 104 04 3 104 10 3 104 16 3 104 21 3 104 28 General Features Input features Output features Batteries Configuration and management Physical features Environmental conditions Conformity Services Nominal Power (kva) 10 15 20 30 40 60 Active power (kw) 9 13,5 18 27 36 54 Module Power (kva) 3,4 5 6,7 5 6,7 6,7 Technology System Modular, expandable and redundant in a single cabinet On-Line Double Conversion VFI-SS-111 Modular, expandable and redundant system Input voltage 230V 1F+N, 400V 3F+N 400V 3F + Neutral Input frequency 50-60 Hz ±2% Autosensing Input Voltage Range 400V +15%/-20% - 230V +15%/-20% 400V +15%/-20% Compatibility with Power-Supply Units THD Input Current 3% Configurable in order to achieve synchronism between input and output frequencies, even for wider frequency ranges, ±14% Input Power Factor 0,99 Output voltage 230V, 400V 3F +N 400V 3F + Neutral Performance at Full Load 95% Nominal output frequency 50/60 Hz can be selected by the user ±1 Hz Crest Factor 1:3,5 Output Voltage Tolerance ±1% Allowed Overload 100 seconds at 125%, 30 seconds at 150% Performance in Eco Mode 98% Bypass Battery Module Battery Series Type/Voltage Uptime Battery Charge Display and Signals Communication Ports Emergency Power Off (EPO) Remote Management Automatic and maintenance bypass The battery modules are designed to easily be fitted inside the cabinet. No particular operation is necessary to connect them VRLA - AGM / 240 Vdc (internal redundant series) Configurable and expandable both internally and with additional battery cabinets Smart Charge technology. 3-stage advanced cycle 4 rows/20 characters, 4 menu browsing buttons, multi-colour LED status indicator, alarms and audio signals 2 RS232 serial ports, 1 Logical gate, 4 ports with dry contacts, 1 slots for interfaces Yes Available Dimensions (H x W x D) (mm) 1345 x 414 x 628 Installed Power Modules 3 6 6 9 Installable Battery Slots Up to 12 - - - Net Weight (kg) 120 130 130 150 Operating Temperature/Humidity 0-40 C / 20-80% Degree of protection Maximum Audible Noise at 1 m from the Unit (dba) 46 Heat Loss (BTU/h) 1436 2155 2873 4310 5746 8619 IP21 Certifications EN 62040-2, EN 62040-3, EN 62040-1 Standard Warranty Installation Maintenance Easy to Manage 2-year warranty Can be performed by the user, modular architecture with "plug and play" power and battery modules Can be performed by the user, optional services available from the manufacturer Advanced diagnostics functions via the display WWW..LEGRAND.COM MODULAR 25
MEGALINE Modular single-phase with double conversion VFI 3 108 57 Pack. Item SINGLE CABINET - WITHOUT BATTERIES NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET 3 103 51 1250 875-1 3 103 53 2500 1750-1 3 103 55 3750 2625-1 3 103 57 5000 3500-1 3 108 62 3 108 63 DOUBLE CABINET - WITHOUT BATTERIES NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET 3 103 60 + 3 108 59 5000 3500-2 3 103 63 + 3 108 59 6250 4375-2 3 103 66 + 3 108 59 7500 5250-2 3 103 69 + 3 108 59 8250 6125-2 3 103 72 + 3 108 59 10000 3500-2 3 103 60 + 3 107 78 Pack. Item SINGLE CABINET (German Standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET 3 108 35 WEIGHT (kg) 3 103 50 1250 875 11 1 23,5 3 103 52 2500 1750 11 1 34 3 103 54 3750 2625 11 1 43 3 103 56 5000 3500 11 1 53 DOUBLE CABINET NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 60 + 3 107 78 5000 3500 11 2 24+50 3 103 63 + 3 107 79 6250 4375 11 2 27+58 3 103 66 + 3 107 80 7500 5250 11 2 29+65 3 103 69 + 3 107 81 8250 6125 11 2 32+73 3 103 72 + 3 107 82 10000 3500 11 2 34+80 SINGLE CABINET (French standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 42 1250 875 11 1 23,5 3 103 43 2500 1750 11 1 34 3 103 44 3750 2625 11 1 43 3 103 45 5000 3500 11 1 53 SINGLE CABINET (British standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 46 1250 875 11 1 23,5 3 103 47 2500 1750 11 1 34 3 103 48 3750 2625 11 1 43 3 103 49 5000 3500 11 1 53 BATTERY EXPANSIONS DESCRIPTION 3 107 75 Cabinet with 1 kb 3 107 76 Cabinet with 2 kb 3 107 77 Cabinet with 3 kb 3 107 78 Cabinet with 4 kb 3 107 79 Cabinet with 5 kb 3 107 80 Cabinet with 6 kb 3 107 81 Cabinet with 7 kb 3 107 82 Cabinet with 8 kb 3 107 83 Cabinet with 9 kb 3 107 84 Cabinet with 10 kb BATTERY EXPANSION WITH BATTERY CHARGER DESCRIPTION 3 107 86 Cabinet with 1 kb with battery charger 3 107 87 Cabinet with 2 kb with battery charger 3 107 88 Cabinet with 3 kb with battery charger 3 107 89 Cabinet with 4 kb with battery charger 3 107 90 Cabinet with 5 kb with battery charger 3 107 91 Cabinet with 6 kb with battery charger 3 107 92 Cabinet with 7 kb with battery charger 3 107 93 Cabinet with 8 kb with battery charger 3 107 94 Cabinet with 9 kb with battery charger 3 107 95 Cabinet with 10 kb with battery charger ACCESSORIES DESCRIPTION 3 108 35 Power module (PW 1250) 3 108 57 Uptime up-grade single cabinet (kb MegaLine/1) 3 108 58 Uptime up-grade double cabinet (kb MegaLine/2) 3 108 59 Empty battery cabinets 3 108 60 Y cable for connecting second additional battery cabinet (MegaLine SPLITTER) 3 108 61 Kit with battery cabinet extension for tower configuration (PL MegaLine cable) 3 108 62 Manual bypass for single cabinet (BP/1) 3 108 63 Manual bypass for double cabinet (BP/2) 3 107 85 Additional battery charger (CB 36) 3 109 72 Relay interface kit NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 26
MEGALINE Modular single-phase with double conversion VFI Item General Features Input Output Uptime Equipment Mechanical features Environmental conditions Certifications Certifications 3 103 42 3 103 46 3 103 50 3 103 43 3 103 47 3 103 52 3 103 44 3 103 48 3 103 54 Single CABINET 3 103 45 3 103 49 3 103 56 3 103 60 + 3 107 78 3 103 63 + 3 107 79 3 103 66 + 3 107 80 Double CABINET 3 103 69 + 3 107 81 3 103 72 + 3 107 82 Nominal power (VA) 1250 2500 3750 5000 5000 6250 7500 8750 10000 Active power (W) 875 1750 2625 3500 3500 4375 5250 6125 7000 Max expandability (VA) 5000 10000 Max expandability (W) 3500 7000 Technology architecture Input nominal voltage Input voltage range Minimum network operating voltage On-line double conversion (VFI-111) Modular, Expandable, N+X Redundant with 1250 VA power boards in a single cabinet 230 V 184 V 264 V at 100% of the load 100 V at 50% of the load THD Input current 3% Input Power Factor Input frequency 0.99 from 20% of the load 50 Hz / 60 Hz ± 2% autosensing Output voltage 230 V ± 1% Output frequency THD Output voltage Waveform Performance when connected to the mains 50 Hz / 60 Hz synchronised 1% with non-linear load Sinusoidal Crest Factor 3,5 : 1 Allowed overload 92% at 100% of the load 300% for 1 sec. 200% for 5 sec. 150% for 30 sec. Uptime with 50% load (min) 20 Uptime with 80% load (min) 11 Uptime expandability Bypass Signals and Alarms Communication Ports Communicator Software Protections IN/OUT mains connection Yes Static and Electromechanical, automatic and internally synchronised (due to overload or operating fault). Large 4-line alphanumeric display, multi-colour status indicator, audio signal no.1 RS 232 port, no.2 logical gates Can be downloaded free of charge (after requesting the activation code) Electronic protections against overloads, short-circuits and excessive battery discharge. Operation stops when the uptime ends. In-rush current limiter at start-up. Sensor to connect the neutral cable correctly. Back-feed protection (electrical safety insulation of the input plug during battery-based operation). EPO contact (complete shutdown in the event of an emergency) Standard German / Clamp connector with universal multiple socket outlet (Italian/German standard) Net weight (kg) 23,5 34 43 53 24 + 50 26,5+57,5 29 + 65 31,5+72,5 34 + 80 Dimensions (H x W x D) (mm) 475 x 270 x 570 2 x 475 x 270 x 570 Installed power boards 1 2 3 4 4 5 6 7 8 Free power expansion slots 3 2 1-4 3 2 1 - Installed battery kits 1 2 3 4 4 5 6 7 8 Free uptime expansion slots 3 2 1-6 5 4 3 2 Operating temperature ( C) 0 40 Degree of protection Relative humidity (%) IP21 20 80 non-condensing Noise level at 1 m (dba) 40 Standards EN 62040-1, EN 62040-2, EN 62040-3 Standard Warranty 2-year warranty WWW..LEGRAND.COM MODULAR 27
MEGALINE RACK Modular single-phase with double conversion VFI 3 103 85 3 107 96 3 108 62 3 107 85 3 109 73 - Wide input voltage and frequency range - Operational frequency at 50 or 60 Hz with auto-recognition - Frequency conversion 50 in - 60 out or vice versa - Extension of the input frequency range for operation with power-supply units - Operation in eco mode (energy savings) - Operation in load waiting mode (on demand protection) - Adjustable output voltage in 1 volt steps from the front panel - Low noise level - Internal and external temperature measurement - Fan control based on temperature and load - Pre-set for emergency remote shut-off Pack. Item RACK (German standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 79 1250 875 11 1 23,5 3 103 81 2500 1750 11 1 34 3 103 83 3750 2625 11 1 43 3 103 85 5000 3500 11 1 53 RACK (French standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 34 1250 875 11 1 23,5 3 103 35 2500 1750 11 1 34 3 103 36 3750 2625 11 1 43 3 103 37 5000 3500 11 1 53 RACK (British standard) NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD NO. CABINET WEIGHT (kg) 3 103 38 1250 875 11 1 23,5 3 103 39 2500 1750 11 1 34 3 103 40 3750 2625 11 1 43 3 103 41 5000 3500 11 1 53 Pack. Item UPTIME EXPANSION NOMINAL VA KB ADDITIONAL EXPANSION (MIN.) 80% OF THE LOAD 3 103 87 1250 1 15 3 103 88 1250 2 30 3 103 89 1250 3 45 3 103 90 2500 1 15 3 103 91 2500 2 17 3 103 92 3750 1 15 BATTERY EXPANSIONS FOR RACK DESCRIPTION 3 107 96 Rack with 1 kb 3 107 97 Rack with 2 kb 3 107 98 Rack with 3 kb 3 107 99 Rack with 4 kb 3 108 00 Rack with 1 kb with battery charger 3 108 01 Rack with 2 kb with battery charger 3 108 02 Rack with 3 kb with battery charger 3 108 03 Rack with 4 kb with battery charger ACCESSORIES DESCRIPTION 3 108 35 Power module (PW 1250) 3 108 04 Empty battery rack cabinets 3 108 62 Manual bypass for single cabinet (BP/1) 3 107 85 Additional battery charger (CB 36) 3 109 72 Relay interface kit 3 109 73 Extendable Rack Guides Kit 6U NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 28
MEGALINE RACK Modular single-phase with double conversion VFI Item 3 103 34 3 103 38 3 103 79 3 103 35 3 103 39 3 103 81 3 103 36 3 103 40 3 103 83 3 103 37 3 103 41 3 103 85 General Features Nominal power (VA) 1250 2500 3750 5000 Active power (W) 875 1750 2625 3500 Max expandability (VA) 5000 Max expandability (W) 3500 Input Technology architecture Input nominal voltage Input voltage range Minimum network operating voltage On-line double conversion (VFI-111) Modular, Expandable, N+X Redundant with 1250 VA power boards in a single cabinet 230 V 184 V 264 V at 100% of the load 100 V at 50% of the load THD Input current 3% Input Power Factor Input frequency 0.99 from 20% of the load 50 Hz / 60 Hz ± 2% autosensing Output Output voltage 230 V ± 1% Output frequency THD Output voltage Waveform 50 Hz / 60 Hz synchronised 1% with non-linear load Sinusoidal Crest Factor 3,5 : 1 Performance when connected to the mains Allowed overload 92% at 100% of the load 300% for 1 sec. 200% for 5 sec. 150% for 30 sec. Uptime Uptime with 50% load (min) 20 Uptime with 80% load (min) 11 Uptime expandability Yes Equipment Mechanical features Bypass Signals and Alarms Communication Ports Communicator Software Protections IN/OUT mains connection Static and Electromechanical, automatic and internally synchronised (due to overload or operating fault) Large 4-line alphanumeric display, multi-colour status indicator, acoustic signal no.1 RS 232 port, no.2 logical gates Can be downloaded free of charge (after requesting the activation code) Electronic protections against overloads, short-circuits and excessive battery discharge. Operation stops when the uptime ends. In-rush current limiter at start-up. Sensor to connect the neutral cable correctly. Back-feed protection (electrical safety insulation of the input plug during battery-based operation). EPO contact (complete shutdown in the event of an emergency) Standard German / Clamp connector with universal multiple socket outlet (Italian/German standard) Net weight (kg) 23,5 34 43 53 Dimensions (H x W x D) (mm) 266 x 483 x 582 Installed power boards 1 2 3 4 Free power expansion slots 3 2 1 - Installed battery kits 1 2 3 4 Free uptime expansion slots 3 2 1 - Environmental conditions Operating temperature ( C) 0 40 Degree of protection Relative humidity (%) IP21 20 80 non-condensing Noise level at 1 m (dba) 40 Certifications Standards EN 62040-1, EN 62040-2, EN 62040-3 Warranty Standard Warranty 2-year warranty MODULAR 29 WWW..LEGRAND.COM
MEGALINE Table of long uptimes single and double cabinet version Model Single Cabinet Double Cabinet Power: Uptime 80% of the load no. cabinet and dimensions W x H x D (mm) Codes 1,250 VA 15 1x (270 x 475 x 570) 3 103 73 1,250 VA 30 1x (270 x 475 x 570) 3 103 74 1,250 VA 45 1x (270 x 475 x 570) 3 103 75 1,250 VA 60 2x (270 x 475 x 570) 3 103 50 + 3 107 76 2,500 VA 15 1x (270 x 475 x 570) 3 103 76 2,500 VA 30 2x (270 x 475 x 570) 3 103 52 + 3 107 78 2,500 VA 45 2x (270 x 475 x 570) 3 103 52 + 3 107 79 2,500 VA 60 2x (270 x 475 x 570) 3 103 52 + 3 107 81 3,750 VA 15 1x (270 x 475 x 570) 3 103 77 3,750 VA 30 2x (270 x 475 x 570) 3 103 54 + 3 107 79 3,750 VA 45 2x (270 x 475 x 570) 3 103 54 + 3 107 82 3,750 VA 60 2x (270 x 475 x 570) 3 103 54 + 3 107 84 5,000 VA 15 2x (270 x 475 x 570) 3 103 56 + 3 107 76 5,000 VA 30 2x (270 x 475 x 570) 3 103 56 + 3 107 80 5,000 VA 45 2x (270 x 475 x 570) 3 103 56 + 3 107 84 5,000 VA 60 3x (270 x 475 x 570) 3 103 56 + 3 107 84+ 3 107 77 5,000 VA 15 2x (270 x 475 x 570) 3 103 60 + 3 107 80 5,000 VA 30 2x (270 x 475 x 570) 3 103 60 + 3 107 84 5,000 VA 45 3x (270 x 475 x 570) 3 103 60 + 3 107 84 + 3 107 78 5,000 VA 60 3x (270 x 475 x 570) 3 103 60 + 3 107 84 + 3 107 81 6,250 VA 15 2x (270 x 475 x 570) 3 103 63 + 3 107 81 6,250 VA 30 3x (270 x 475 x 570) 3 103 63 + 3 107 84 + 3 107 76 6,250 VA 45 3x (270 x 475 x 570) 3 103 63 + 3 107 84 + 3 107 81 6,250 VA 60 4x (270 x 475 x 570) 3 103 63 + 3 107 84 (x2) + 3 107 76 7,500 VA 15 2x (270 x 475 x 570) 3 103 66 + 3 107 82 7,500 VA 30 3x (270 x 475 x 570) 3 103 66 + 3 107 84 + 3 107 79 7,500 VA 45 3x (270 x 475 x 570) 3 103 66 + 3 107 84 (x2) 7,500 VA 60 4x (270 x 475 x 570) 3 103 66 + 3 107 84 (x2) + 3 107 80 8,750 VA 15 2x (270 x 475 x 570) 3 103 69 + 3 107 84 8,750 VA 30 3x (270 x 475 x 570) 3 103 69 + 3 107 84 + 3 107 81 8,750 VA 45 4x (270 x 475 x 570) 3 103 69 + 3 107 84 (x2) + 3 107 78 8,750 VA 60 4x (270 x 475 x 570) 3 103 69 + 3 107 84 (x3) 10,000 VA 15 3x (270 x 475 x 570) 3 103 72 + 3 107 84 + 3 107 76 10,000 VA 30 3x (270 x 475 x 570) 3 103 72 + 3 107 84 (x2) 10,000 VA 45 4x (270 x 475 x 570) 3 103 72 + 3 107 84 (x2) + 3 107 81 10,000 VA 60 5x (270 x 475 x 570) 3 103 72 + 3 107 84 (x3) + 3 107 78 NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 1 cabinet W 270mm 2 cabinet W 540mm 3 cabinet W 810mm 4 cabinet W 1080mm 5 cabinet W 1350mm 30
MEGALINE RACK Table of long uptimes Model Rack Power: Uptime 80% of the load no. cabinet and dimensions W x H x D (mm) Codes 1,250 VA 15 1 (6U) 3 103 87 1,250 VA 30 1 (6U) 3 103 88 1,250 VA 45 1 (6U) 3 103 89 1,250 VA 60 2 (6U + 3U) 3 103 79 + 3 107 99 2,500 VA 15 1 (6U) 3 103 90 2,500 VA 30 2 (6U + 3U) 3 103 81 + 3 107 98 2,500 VA 45 2 (6U + 3U) 3 103 91 + 3 107 98 2,500 VA 60 3 (6U + 2x3U) 3 103 81 + 3 107 98 + 3 107 99 3,750 VA 15 1 (6U) 3 103 92 3,750 VA 30 2 (6U + 3U) 3 103 92 + 3 107 99 3,750 VA 45 3 (6U + 2x3U) 3 103 83 + 3 107 99 (x2) 3,750 VA 60 4 (6U + 3x3U) 3 103 83 + 3 107 99 (x2) + 3 107 97 5,000 VA 15 2 (6U + 3U) 3 103 85 + 3 107 97 5,000 VA 30 3 (6U + 2x3U) 3 103 85 + 3 107 97 + 3 107 99 5,000 VA 45 4 (6U + 3x3U) 3 103 85 + 3 107 97 + 3 107 99 (x2) 5,000 VA 60 5 (6U + 4x3U) 3 103 85 + 3 107 97 + 3 107 99 (x3) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 6U= 483 x 266 x 582 3U= 483 x 133x 584 1 cabinet H 266mm (6U) 2 cabinet H 532mm (9U) 3 cabinet H 798mm (12U) 4 cabinet H 1064mm (15U) 5 cabinet H 1330mm (18U) WWW..LEGRAND.COM MODULAR 31
32
CONVENTIONAL Daker DK WHAD DHEA Safe, powerful and technological solutions Double conversion online equipped with DSP microprocessor for precise and constant control of all the measurements and the power factor correction circuit (PFC). Professional solutions with power that can achieve up to 10 kva. Electronics with no-transformer technology for high quality energy output with a yield of up to 93%. WWW..LEGRAND.COM CONVENTIONAL 33
online double conversion can be used in both tower and rack configurations. Daker DK CONVENTIONAL SINGLE PHASE Using the display it is possible to control all the main system parameters and the state of the, including the load level, remaining battery life and failures. Additional battery cabinets increase the autonomy of group continuity. A battery charger can be added to each battery cabinet for fast and secure charging. tower version with additional battery cabinet 34
Three standard dimensions for power up to 10kVA Based on requested power and uptime there are and additional battery cabinets available with dimensions for 2 to 4 units. and battery cabinet for 2 units and battery cabinet for 3 units and battery cabinet for 4 units Reversible display Daker DK can be used in both tower and 19 inch rack versions thanks to its reversible display. WWW..LEGRAND.COM CONVENTIONAL 35
on line double conversion for application of small and medium power. WHAD CONVENTIONAL SINGLE PHASE The issued power, 800 VA to 6,000 VA, allows for high level electrical protection for equipment whose power consumption is not too high. The are made of a single board that integrates control power and logic, control and diagnostics. Thanks to the reduced footprint and the extended and tight shape, the WHAD occupy very little space, even if placed on top of a work station. Models up to 2500 VA can extend uptime by adding battery cabinets. In the most performing version there is a slot for inserting internal versions of the SNMP communication interfaces. 36
The double conversion on line designed with overlapping components with quick connections. DHEA ENERGY STATION CONVENTIONAL SINGLE PHASE The system is made of an inverter section and battery modules (battery pack) equipped with a PLUG-IN connection and hot swap system. Reduces overall dimensions, depth of 185 mm, allows positioning the uninterruptible power supply in extremely small spaces. The special hermetically sealed batteries, that do not release any gas fumes, make it possible to use within home environments. Load management The 1500 VA model is equipped with 3 outputs, 2 of them are times for inverter operation, since they deactivate after a pre-set interval, they make it possible to safeguard the power supply of the most important loads based on available uptime. Plug-in connection with hot swap system Standard components and quick connections make it possible for the less expert to transport and install every element of the system easily and, thanks to the hot swap system, it is possible to add or replace battery packs at any time, without shutting off the inverter. WWW..LEGRAND.COM CONVENTIONAL 37
Daker DK Conventional - Single-phase On-line double conversion VFI 3 100 54 3 100 50 3 107 71 3 109 53 The display shows the main system parameters and their status, including the battery charge level and malfunctions. The integrated communication software allows not only controlling the uninterruptable power supply and stopping in case of equipment malfunction, it also allows the user to remotely test the main functions of the uninterruptable power supply, communicating through SNMP/Internet/network adaptor, accessing uninterruptable power supply unit functions by way of Internet and also sending the user an SMS if specific events occur. The optional slot provides additional flexibility for network configuration. There is also a WEB/SNMP board and a relay interface available that are capable of supplying isolated contacts for application on industrial control panel or remote alarm panels. The automatic and manual bypass (optional) guarantees continual electrical power supply to critical loads, in case of electronic malfunction, overload, overheating or programmed maintenance. A maintenance bypass switch box is available. Pack. Item CONVERTIBLE WITH BATTERIES NOMINAL VA ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) 3 100 50 1000 800 8 16 3 100 51 2000 1600 8 29,5 3 100 52 3000 2400 6,3 30 3 100 53 4500 4050 6 60 3 100 54 6000 5400 4 60 Pack. Item VARIOUS ACCESSORIES DESCRIPTION 3 109 50 Additional 200W battery charger 3 109 51 Additional 500W battery charger 3 109 54 Additional 1000W battery charger 3 109 52 Kit of Rack support brackets 3 109 53 External manual bypass CONVERTIBLE - WITHOUT BATTERIES NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) 3 100 56 4500 4050-25 3 100 57 6000 5400-25 3 100 58 10000 9000-26 BATTERY CABINET (WITH BATTERIES) DESCRIPTION 3 107 69 Battery cabinet for 3 100 50 (12 batteries 12V, 7.2 Ah) 3 107 70 Battery cabinet for 3 100 51 (12 batteries 12V, 7.2 Ah) 3 107 71 Battery cabinet for 3 100 52 (12 batteries 12V, 9 Ah) 3 107 72 Battery cabinet for 3 100 56 and 3 100 57 (20 batteries 12V, 7.2 Ah) 3 107 66 Battery cabinet for 3 100 58 (20 batteries 12V, 9 Ah) BATTERY CABINETS (EMPTY) DESCRIPTION 3 107 50 Battery cabinet for 3 100 50 (for 12 batteries 12V, 7.2 Ah) 3 107 51 Battery cabinet for 3 100 51 (for 12 batteries 12V, 7.2 Ah) 3 107 52 Battery cabinet for 3 100 52 (for 12 batteries 12V, 9 Ah) 3 107 53 Battery cabinet for 3 100 56 and 3 100 57 (for 20 batteries 12V, 7.2 Ah) 3 107 54 Battery cabinet for 3 100 58 (for 20 batteries 12V, 9 Ah) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 38
Daker DK Conventional - Single-phase On-line double conversion VFI Item 3 100 50 3 100 51 3 100 52 3 100 53 3 100 56 3 100 54 3 100 57 3 100 58 General Features Input Output Batteries Configuration and management Mechanical features Environmental conditions Certifications Warranty Nominal power (VA) 1000 2000 3000 4500 6000 10000 Active power (W) 800 1600 2400 4050 5400 9000 Technology Waveform architecture Input voltage Input frequency Input Voltage Range On-Line Double Conversion VFI-SS-111 Sinusoidal convertible tower and 19 rack 230 V 50-60 Hz ±5% Autosensing 160V - 288V with full load THD Input current 3% Input power factor 0,99 Compatibility with Power-Supply Units Configurable in order to achieve synchronism between input and output frequencies, even for wider frequency ranges, ±14% Output voltage 230V ± 1% Output frequency (nominal) 50/60 Hz (can be set from the LCD panel) +/- 0.1% Crest Factor 1:3 THD Output voltage 97% Output Voltage Tolerance ±1% Bypass Uptime Expansion Automatic and maintenance bypass (OPTIONAL) Number of batteries 3 6 6 20-20 - - Battery series Type/Voltage 12V 7.2Ah 12V 7.2Ah 12V 9Ah 12V 5Ah - 12V 5Ah - - Uptime with 80% load (min) 8 8 6,3 6-4 - - Display and Signals Communication Ports Remote Management Network interface slot Dimensions H x W x D (mm) Battery Cabinet Dimensions H x W x D (mm) 440x88 (2U) x405 440x176 (4U) x405 440x88 (2U) x650 440x88 (2U) x650 yes Four buttons and four LEDs to monitor the status of the in real time 440x88 (2U) x650 440x88 (2U) x650 RS232, USB serial ports 440x176 (4U) x680 440x132 (3U) x680 available SNMP 440x88 (2U) x680 440x132 (3U) x680 440x176 (4U) x680 440x132 (3U) x680 440x88 (2U) x680 440x132 (3U) x680 440x132 (3U) x680 440x132 (3U) x680 Net Weight (kg) 16 29,5 30 52 25 52 25 26 Operating temperature ( C) 0 40 Degree of protection Relative humidity (%) IP21 20 80 % non-condensing Noise level at 1 m (dba) 50 Heat Loss (BTU/h) 490 654 818 982 1310 1636 Standards EN 62040-1, EN 62040-2, EN 62040-3 Standard Warranty repair or replacement for 2 years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. WWW..LEGRAND.COM CONVENTIONAL 39
Daker DK Table of long uptimes Model Daker DK Power: 1000 VA 2000 VA 3000 VA 4500 VA 6000 VA 10000 VA Uptime 80% of the load no. Cabinet and dimensions H x W x D (mm) Item 8' 440 x 88 x 405 3 100 50 75' 440 x 88 x 405 + 440 x176 x 405 3 100 50 + 3 107 69 140' 440 x 88 x 405 + 440x176 x 405 (x2) 3 100 50 + 3 107 69 (x2) 205' 440 x 88 x 405 + 440 x176 x 405 (x3) 3 100 50 + 3 107 69 (x3) 265' 440 x 88 x 405 + 440 x 176 x 405 (x4) 3 100 50 + 3 107 69 (x4) 8' 440 x 88 x 650 3 100 51 45' 440 x 88 x 650 (x2) 3 100 51 + 3 107 70 75' 440 x 88 x 650 (x3) 3 100 51 + 3 107 70 (x2) 120 440 x 88 x 650 (x4) 3 100 51 + 3 107 70 (x3) 145 ' 440 x 88 x 650 (x5) 3 100 51 + 3 107 70 (x4) 6'30" 440 x 88 x 650 3 100 52 30' 440 x 88 x 650 (x2) 3 100 52 + 3 107 71 65' 440 x 88 x 650 (x3) 3 100 52 + 3 107 71 (x2) 100' 440 x 88 x 650 (x4) 3 100 52 + 3 107 71 (x3) 120 440 x 88 x 650 (x5) 3 100 52 + 3 107 71 (x4) 9' 440 x 88 x 650 + 440 x 132 x 680 3 100 56 + 3 107 72 27' 440 x 88 x 650 + 440 x 132 x 680 (x2) 3 100 56 + 3 107 72 (x2) 50' 440 x 88 x 650 + 440 x 132 x 680 (x3) 3 100 56 + 3 107 72 (x3) 65' 440 x 88 x 650 + 440 x 132 x 680 (x4) 3 100 56 + 3 107 72 (x4) 90' 440 x 88 x 650 + 440 x132 x 680 (x5) 3 100 56 + 3 107 72 (x5) 110' 440 x 88 x 650 + 440 x 132 x 680 (x6) 3 100 56 + 3 107 72 (x6) 130' 440 x 88 x 650 + 440 x 132 x 680 (x7) 3 100 56 + 3 107 72 (x7) 8'30" 440 x 88 x 650 + 440 x 132 x 680 3 100 57 + 3 107 72 25' 440 x 88 x 650 + 440 x 132 x 680 (x2) 3 100 57 + 3 107 72 (x2) 45' 440 x 88 x 650 + 440 x 132 x 680 (x3) 3 100 57 + 3 107 72 (x3) 60' 440 x 88 x 650 + 440x132x680 (x4) 3 100 57 + 3 107 72 (x4) 5'30" 440 x 132 x 650 + 440 x 132 x 680 3 100 58 + 3 107 66 15'30" 440 x132x650 + 440 x 132 x 680 (x2) 3 100 58 + 3 107 66 (x2) 30' 440 x132x650 + 440 x 132 x 680 (x3) 3 100 58 + 3 107 66 (x3) 50' 440 x 132 x 650 + 440 x 132 x 680 (x4) 3 100 58 + 3 107 66 (x4) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 1000 VA 2 cabinet W 2U + 4U 3000 VA 3 cabinet W 2U +2 U + 2U 6000 VA 2 cabinet W 2U + 3U 10000 VA 2 cabinet W 3U + 3U TOWER version 1000 VA 2 cabinet H 6U (264mm) 4500 VA 3 cabinet H 6U (264mm) 6000 VA 2 cabinet H 5U (320mm) 10000 VA 2 cabinet H 6U (264mm) RACK version 40
DHEA Conventional - Single-phase On-line double conversion VFI Idem 3 101 07 3 101 08 General Features Nominal Power (VA) 1000 1500 Active Power (W) 700 1050 Technology on-line double conversion Waveform sinusoidal 3 101 08 Input nominal voltage Input Voltage Range Minimum network operating voltage Input frequency Power factor on input 230 V 184 V 265 V at 100% of the load 184V with nominal load / 100V at 50% of the nominal load 50/60 Hz ± 2% (± 14% in extended range) 0.99 from 80% of the nominal load Output voltage 230 V ± 1% Distortion of output voltage 1% 3 107 73 - System that can be combined with a power supply unit to increase uptime in case of extended black out. - Battery modules with batteries and related integrated PLUG-IN connections. - Possibility of adding up to 10 Battery pack. - Power supply voltage of the inverter only present once the module is connected. Pack. Item ENERGY STATIONS NOMINAL VA ACTIVE W 3 101 07 1000 700 3 101 08 1500 1050 BATTERY DESCRIPTION 3 107 73 Battery module Output frequency (battery operation) no. battery pack Batteries 50/60 Hz ± 1% 2 x 36 V 7.2 Ah in overlapping Battery Packs Acoustic noise at 1 m (dba) 40 Net weight (kg) Dimensions (H x W x D) (mm) External Connections 4 (inverter) + 16 (battery pack) 309 x 450 x 170 (inverter) - 125 x 450 x 170 (battery pack) Standards EN 62040-1, EN 50091-2, EN 62040-3 Degree of protection Output socket 1 RS 232 + 3 contact outputs (2 poles) + EPO 1 line IP21 Uptime at 100% of the load 1000 VA 1500 VA 1 20 15 2 48 32 3 1 h 20 50 4 2 h 1 h 15 5 2 h 40 1 h 35 6 3 h 20 2 h 7 4 h 2 h 30 8 5 h 3 h 9 6 h 3 h 30 10 7 h 4 h 3 lines (2 of them with timer) NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. WWW..LEGRAND.COM CONVENTIONAL 41
WHAD Conventional - Single-phase On-line double conversion VFI 3 100 87 3 100 96 3 101 01 All models are equipped with: - logical level port that can be connected to a Relay interface Kit. - slot for inserting internal versions of the SNMP, CS121 SK and CS121B SK communication interfaces. - possibility of connecting to an external maintenance bypass device, designed to be connected to the input/output connector present on the back of the. Pack. Item WITH STANDARD GERMAN SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) 3 100 87 800 560 20 12 3 100 90 1000 700 15 12 3 100 93 1500 1050 10 12 3 100 96 2000 1400 12 23 3 100 97 2500 1750 8 23 3 100 98 3000 2100 18 55 3 100 99 4000 2800 12 55 3 101 00 5000 3500 13 65 3 101 01 6000 4200 10 65 WITH STANDARD FRENCH SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) 3 100 88 800 560 17 12 3 100 91 1000 700 13 12 3 100 94 1500 1050 8 12 3 101 09 2000 1400 12 23 3 101 11 2500 1750 8 23 Model Whad Power: 800 VA 1000 VA 1500 VA 2000 VA 2500 VA Uptime (80% of the load): 90 170 60 130 35 75 45 75 32 50 Cabinet no. and dimensions H X W X D (mm) 88 x 355 x 390 + 160 x 319 x 390 88 x 355 x 390 + 160 x 319 x 390 (x2) 88 x 355 x 390 + 160 x 319 x 390 88 x 355 x 390 + 160 x 319 x 390 (x2) 88 x 355 x 390 + 160 x 319 x 390 88 x 355 x 390 + 160 x 319 x 390 (x2) 460 x 160 x 425 + 160 x 319 x 390 460 x 160 x 425 + 2x(160 x 319 x 390) 460 x 160 x 425 + 160 x 319 x 390 460 x 160 x 425+ 2x(160 x 319 x 390) Codes 3 100 87 + 3 107 74 3 100 87 + 3 107 74 (x2) 3 100 90 + 3 107 74 3 100 90 + 3 107 74 (x2) 3 100 93 + 3 107 74 3 100 93 + 3 107 74 (x2) 3 100 96 + 3 108 20 3 100 96 + 3 108 20 (x2) 3 100 97 + 3 108 20 3 100 97 + 3 108 20 (x2) WITH STANDARD ENGLISH SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD WEIGHT (kg) 3 100 89 800 560 17 12 3 100 92 1000 700 13 12 3 100 95 1500 1050 8 12 3 101 10 2000 1400 12 23 3 101 12 2500 1750 8 23 VARIOUS ACCESSORIES DESCRIPTION 3 107 74 Additional battery cabinet for 800-1000 - 1500 3 108 20 Additional battery cabinet for 2000-2500 3 109 71 Y cable for connecting two battery cabinets 3 108 62 Manual bypass for 2000VA / 3000VA 3 109 77 Manual bypass for 5000VA / 6000VA NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 42
WHAD Conventional - Single-phase On-line double conversion VFI Item General Features Input Output Batteries Configuration and management Mechanical features Environmental conditions Environmental conditions Warranty 3 100 87 3 100 88 3 100 89 3 100 90 3 100 91 3 100 92 3 100 93 3 100 94 3 100 95 3 100 96 3 101 09 3 101 10 3 100 97 3 101 11 3 101 12 3 100 98 3 100 99 3 101 00 3 101 01 Nominal power (VA) 800 1000 1500 2000 2500 3000 4000 5000 6000 Active power (W) 560 700 1050 1400 1750 2100 2800 3500 4200 Technology Waveform architecture Input voltage Input frequency Input Voltage Range On-Line Double Conversion VFI-SS-111 Sinusoidal Conventional systems with expandable uptime 230 V 50-60 Hz ±2% Autosensing 184V 265V at 100% of the load THD Input current 3% Input power factor 0,99 Output voltage 230V ± 1% Output frequency (nominal) 50/60 Hz synchronised Crest Factor 3,5 : 1 THD Output voltage 1% Allowed Overload Bypass Uptime Expansion 300% for 1 sec., 200% for 5 sec., 150% for 30 sec. Electromechanical, automatic and internally synchronised (due to overload or operating fault) Battery series Type/Voltage VRLA - AGM 48Vdc VRLA - AGM 36Vdc VRLA - AGM 144Vdc VRLA - AGM 192Vdc Uptime with 80% load (min) 20 15 10 12 8 18 12 13 10 Display and Signals Communication Ports Remote Management 1 RS232 serial port Sì Indicatore di stato multicolore a LED, allarmi e segnalazioni acustiche 1 RS232 serial port 1 logical level port Communicator free to download software 1 RS232 serial port, 1 logical level port, 1 slot for network interface connection (CS121) Dimensions (H x W x D) (mm) 355 x 88 x 390 460 x 160 x 425 475 x 270 x 570 Battery Cabinet Dimensions (H x W x D) (mm) 319 x 160 x 402 319 x 160 x 402 319 x 160 x 402 Net Weight (kg) 12 23 55 65 Operating temperature ( C) 0 40 Relative humidity (%) Degree of protection 20 80 non-condensing Noise level at 1 m (dba) 40 42 40 Heat Loss (BTU/h) 150 190 287 380 478 570 760 952 1140 IP21 Standards EN 62040-1, EN 62040-2, EN 62040-3 Standard Warranty 2 years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. WWW..LEGRAND.COM CONVENTIONAL 43
44
LINE INTERACTIVE Niky Niky S Simple, reliable and economical solutions Small dimensions, easy to install and configure. Equipped with electronic stabiliser, signal LED and telephone protection ensure total and reliable system protection. Offering a high quality/price ratio guaranteeing a safe investment over time. WWW..LEGRAND.COM LINE INTERACTIVE 45
Ideal protection for all applications such as Small-Office Home-Office. They represent the offer with the best quality/price ratio for the safety of data within the office, your own business and the home PC. Equipped with CPU control, integrated AVR and interface for intelligent communication, ensuring optimal protection management. Niky line interactive Advanced management of battery discharge AVR stabiliser Integrated self-diagnostic function Cold start-up function Intelligent microprocessor control RS232 or USB interface for managing the MODEM/LAN telephone protection 46
Niky S line interactive Sinusoidal output Control using intelligent microprocessor MODEM/LAN telephone protection RS-232 and USB interface for managing the Cold start-up function Protection from voltage peaks Self-test function for the Uninterruptable power unit Intelligent battery management Protection from overload and short-circuit Excellent voltage adjustment WWW..LEGRAND.COM LINE INTERACTIVE 47
AC INPUT SITE WIRING FAULT AC OUTPUT AC INPUT IN OUT SITE WIRING FAULT AC OUTPUT SITE WIRING FAULT RS232 USB IN OUT SITE WIRING FAULT RS232 USB IN OUT Niky Line Interactive - Single-phase VI 3 100 00 3 100 13 Pack. Item WITH STANDARD GERMAN OUTPUT SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) NO. OF SOCKETS IEC NO. OF SOCKETS STANDARD GERMAN PORTS FOR COMMUNICATION 3 100 00 600 300 5 30 1 1 USB 3 100 01 800 400 5 30 1 1 USB WITH STANDARD GERMAN OUTPUT SOCKETS + IEC SOCKET NOMINAL VA : ACTIVE W UPTIME (MIN.) NO. OF SOCKETS IEC NO. OF SOCKETS STANDARD GERMAN PORTS FOR COMMUNICATION 3 100 09 600 300 5 30 1 1 USB 3 100 10 800 400 5 30 1 1 USB 3 100 13 1000 600 5 30 2 2 RS232 3 100 14 1500 900 5 30 2 2 RS232 WITH MULTIPLE IEC OUTPUT SOCKETS NOMINAL VA : ACTIVE W UPTIME (MIN.) NO. OF SOCKETS IEC NO. OF SOCKETS STANDARD GERMAN PORTS FOR COMMUNICATION 3 100 02 600 300 5 30 3 - USB 3 100 03 800 400 5 30 3 - USB 3 100 04 1000 600 5 30 6 - USB 3 100 05 1500 900 5 30 6 - USB Item General Features Input Output Batteries 3 100 00 3 100 02 3 100 09 3 100 01 3 100 03 3 100 10 3 100 01 3 100 04 3 100 13 3 100 05 3 100 14 Nominal power (VA) 600 800 1000 1500 Active power (W) 300 400 600 900 Technology Waveform Input voltage Input frequency Input Voltage Range Line-interactive VI Pseudo-Sinusoidal 230 V 50-60 Hz 160V-290V Output voltage 230V ± 10% Output frequency (nominal) THD Output voltage 50/60 Hz +/-1% 3% with linear load Number of batteries 1 1 2 2 Battery series Type/ Voltage Configuration and Management Display and Signals 12V, 7Ah 12V, 9Ah 12V, 7Ah 12V, 9Ah One push button and 2 LED to monitor status in real-time. Telephone protection RJ11/RJ45 Remote Management Mechanical Features Dimensions H x W x D (mm) Environmental Conditions 171x95x349 available One push button and 4 LED to monitor status in real-time 239x147x354 Net Weight (kg) 7 7,5 13 16 Operating temperature ( C) Relative humidity (%) 0 40 C 0 95 % non-condensing Noise level at 1 m (dba) 40 Certifications Warranty Standards Standard Warranty EN62040-1, EN62040-2, EN62040-3 2 years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 600-800 VA 1000-1500 VA 48
IN OUT USB RS232 IN OUT USB RS232 Niky S Line Interactive - Single-phase VI-SS Item 3 100 06 3 100 20 3 100 07 3 100 08 General Features Nominal power (VA) 1000 1500 2000 3000 Active power (W) 600 900 1200 1800 Technology Line-interactive VI-SS Waveform Sinusoidal Input Input voltage 230 V ± 12% on network ± 5% on battery Input frequency 50-60 Hz Input Voltage Range 160V-290V 3 100 06 Pack. Item NOMINAL VA : ACTIVE W UPTIME (MIN.) 80% OF THE LOAD PORTS FOR COMMUNICATION 3 100 06 1000 600 9 USB-RS232 3 100 20 1500 900 9 USB-RS232 3 100 07 2000 1200 9 USB-RS232 3 100 08 3000 1800 9 USB-RS232 Output Batteries Output voltage 230V ± 10% Output frequency (nominal) THD Output voltage Uptime Expansion 50/60 Hz +/-0.2% 3% with linear load Yes Number of batteries 2 2 4 4 Type/Voltage battery series Configuration and Management Display and Signals Telephone protection Remote Management Mechanical Features Dimensions H x W x D (mm) Environmental Conditions 12V, 7Ah 12V, 9Ah 12V, 7Ah 12V, 9Ah Three buttons and three LEDs to monitor the status of the in real time 242x169x361 RJ11/RJ45 available 242x169x464 Net Weight (kg) 13 15 22 24 Operating temperature ( C) Relative humidity (%) 0 40 C 0 95 % non-condensing Noise level at 1 m (dba) 40 Certifications Warranty Standards Standard Warranty EN62040-1, EN62040-2, EN62040-3 2 years NOTE: autonomy values, expressed in minutes, are measured during optimal operating conditions. 1000-1500-2000 VA 3000 VA WWW..LEGRAND.COM LINE INTERACTIVE 49
50
ACCESSORIES COMMUNICATION management and control systems Network interface, enables remote control of the which can be connected to the network. Sensors for monitoring temperature and humidity of the environment. Communication and supervision software that allows accessing operational data, executing complete diagnostics and configuring special functions. ACCESSORIES COMMUNICATION WWW..LEGRAND.COM 51
ACCESSORIES Network interface RS232 3 108 84 3 109 06 3 108 82 3 109 07 A B C The network interface for management does not require external software. There is a a 32 bit internal processor with a proprietary operating system that can continously monitor operation and handle multiple events (no power, overload, bypass, anomaly,...); as a result, it executes the following actions: Saving log files complete with date and time Saving the trend of the main operational data complete with date and time Sending e-mail Executing scheduled actions Displaying pop-up messages, carrying out a shutdown and customised commands on remote computers (it is necessary for these computers to have the RCCMD software) Shutting off and turning on the Sending Wake on LAN (WOL) Magic Packet signals Support for the SNMP protocol and the main management software (HP OpenView, IBM Tivoli, etc ) Sending SNMP trap messages Displaying data and configuration through internet browser (Internet Explorer, Mozilla Firefox, Opera, etc ) or Telnet Firmware can be updated through specific software package that can be downloaded from the Internet for free Ethernet connection 10/100Mbit Base-T (half-duplex and full-duplex) with autorecognition function DHCP Function 1 RCCMD license included Available in the internal and external versions, the internal version is housed in a dedicated slot. Power supply voltage 9-30 V d.c. (power supply included in the external versions). Professional and industrial versions include programmable digital contacts and additional RS232 / RS485 communication ports. Model Items NETWORK INTERFACE DESCRIPTION CS121 SK 3 108 81 PROFESSIONAL network interface internal version (slot) CS121B SK 3 108 82 STANDARD network interface internal version (slot) CS121 3 108 83 PROFESSIONAL network interface external version CS121B 3 108 84 STANDARD network interface external version CS121M 3 109 06 INDUSTRIAL network interface external version CS121M SK 3 109 07 INDUSTRIAL network interface internal version (slot) > < < < > <> <> <> <> <> Fire alarm systems Air-conditioning units Smoke sensors Relay IN Relay OUT Terminal Configuration Pipe-Through RS232 MODBUS over RS232 / RS485 Temperature Sensors Sensor Manager MODBUS over IP HTTP / java / MON Execution of remote programs SNMP management, SNMP Trap Sending e-mail (SMTP) Telnet, FTP, setup / update Log File, Historical Data File SHUTDOWN / COMMANDS /MESSAGES - Unix / Linux + RCCMD agent - Windows + RCCMD agent - MAC OS X + RCCMD agent - AS/400 + RCCMD agent - Novell NetWare + RCCMD agent - VMware + RCCMD agent - Citrix + RCCMD agent Model A B C CS121B X CS121B X CS121B SK X CS121 X X X CS121 SK X X X CS121M X X* X CS121M SK X X* X *only modbus over RS485. 52
ACCESSORIES Sensors and various accessories 3 109 00 3 108 98 TCP/IP LAN/WAN 3 108 99 3 109 02 3 109 03 COM 2 COM 1 Model Items SENSORS DESCRIPTION SM_T_COM 3 108 97 Temperature sensor for direct connection to COM2 of the CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4 model). It cannot be used with the SensorManager. SM_T_H_COM 3 108 98 Combined temperature and humidity sensor for direct connection to COM2 for CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4 model). Cannot be used with the SensorManager. SensorManager 3 108 99 Manager for environmental sensors: it connects to COM2 of CS121, CS121 SK and SiteSwitch 4 interfaces (only the SS4 model) and manages up to 8 analogue inputs, 4 digital inputs and 4 digital outputs. Configuration is managed directly from CS121 interfaces (PROFESSIONAL and INDUSTRIAL versions) previously described. Scale Divisor and Off set configuration functions allow using the SensorManager with any analogue apparatus (see features). Includes 1 temperature sensor SM_T. SM_T 3 109 00 Temperature sensor can be used exclusively with SensorManager. Allows connecting another SM_T sensor using the specific connector. SM_T_H 3 109 01 Combined temperature and humidity sensor can be used exclusively with SensorManager. Door sensor 3 109 02 It is made of a reed tube switch and a magnet. Compatible with CS121, CS121 SK, CS121 M, CS121M SK, and SensorManager. SM_flash 3 109 03 Flashing light signal. Exclusively compatible with SensorManager. 15 V D.C. Smoke sensors Fire alarm system command Temperature and/or humidity sensors Conditioning system malfunctioning sensor Custom analogue and digital sensors Intrusion sensors SENSOR MANAGER TECHNICAL FEATURES Power supply voltage (Vd.c.) 9-24 Temperature ( C) 0 40 Humidity % non condensing 10 80 Analogue Inputs (V) 0 10 Digital inputs (V) 9 24 Digital outputs V (10mA) 9 24 Dimensions (WxDxH) (mm) 70 X 126 X 30 SENSOR TECHNICAL FEATURES Power supply voltage Vd.c. Temperature range ( C) Relative humidity % (+- 5%) Connection cable m (included) Dimensions H x W x D (mm) * directed by network interface ** directed by SensorManager PAI0018 PAI0032 PAI0021 PAI0020 9 15* 9 15* 9 24** 9 24** -25 +100-25 +100 0 +100 0 +100 0 100 0 100 1,8 1,8 5 5 27 X 70 X 70 ACCESSORIES COMMUNICATION 53 WWW..LEGRAND.COM
ACCESSORIES Load management control unit (SiteSwitch) 3 109 04 It is a device used to control energy distribution and it allows shutting down and turning on devices connected to it individually thanks to the four independent power supply. When without power, for example, a can send a command to shut off less important loads (such as laser printers) in order to ensure the greatest possible uptime to the most critical systems. Once network power has been restored, the same can send the command to turn on these loads. In the front part there are 5 LEDs that allow verifying the status of the main power supply and every output. Brackets that allow installation inside the 19 rack cabinet are included. SiteSwitch 4 is available in two versions: SS4 and SS4 AUX. SS4 It is the most performing version, inside there is a network card installed that receives, through TCP/IP, the controls sent by the CS121 network interface (any model) that manages the. This allows installing SiteSwitch near the loads to be powered and allows a to control a potentially infinite number of control units. The presence of a CS121 SK network interface inside the SS4 also guarantees autonomous operation, i.e. without receiving commands from a : from the WEB interface it is possible to send commands to the computer (through the RCCMD software), program switch on and shut off, sending e-mail and managing environmental sensors. It is compatible with the SNMP protocol. Model Items SITESWITCH 4 DESCRIPTION SS4 3 109 04 High performance load management control unit SS4 AUX 3 109 05 STANDARD load management control unit RS232 LAN Any network interface SS4 AUX It represents the standard solution, it must be guided by a professional, or INDUSTRIAL, type interface installed in the. The ideal solution if installed near the (for example inside the same rack cabinet) a however within 15 metres. RS232 control cable Professional or industrial network interface TECHNICAL FEATURES Type SS4 SS4 AUX Power supply voltage 230 V / 16 A 230 V / 16 A Output socket 4 x (230 V / 8A max) 4 x (230 V / 8A max) Management of output sockets Type of connection for management of output sockets Dimensions H x W x D (mm) Internal / CS121 (all models) Ethernet 10/100 Mbit/s CS121 (PROFESSIONAL and INDUSTRIAL versions) RJ111 Cable approximately 5 m (included) 60 x 260 x 180 60 x 260 x 180 54
ACCESSORIES Management software Example of types of management and communication achieved through software and hardware LOCAL PROTECTION Allows protecting a single user (pc or server) that must be positioned at a distance of less than 12 metres. Model Items SOFTWARE DESCRIPTION Communicator management software management software downloadable*. Software made of a system of applications designed to continually control operation and guarantee the integrity of the operating systems of the computers powered by the actual. Complete of agent for executing commands on remote computers (RS System) 3 108 79 Software made of a system of applications designed to continually control operation and guarantee the integrity of the operating systems of the computers powered by the actual. To be completed with agent for executing commands on remote computers (RCCMD). 3 108 80 Software made of a system of applications designed to continually control operation and guarantee the integrity of the operating systems of the computers powered by the actual. To be completed with agent for executing commands on remote computers (RCCMD), includes RS232/ USB converter. AS/400 3 109 08 Kit for connecting with AS/400 systems. Kit made of a connection cable and a cd-rom with instruction manual. RCCMD Software that enables a computer to receive and execute, using the TCP/IP protocol, all remote commands sent by the management system. A RCCMD license is necessary for each computer to be controlled. Only the licenses are supplied: the software can be downloaded from the internet (after requesting the activation code). RCCMD 3 108 85 Multi OS RCCMD License RCCMD 3 108 86 Packet with 5 multi OS RCCMD licenses RCCMD 3 108 87 Packet with 10 multi OS RCCMD licenses RCCMD 3 108 88 Packet with 25 multi OS RCCMD licenses RCCMD 3 108 89 Packet with 50 multi OS RCCMD licenses RCCMD 3 108 90 RCCMD license for AS/400 (minimum release: V5R3M0) UNMS It is a WEB based application capable of continually monitoring, through the management systems and the TCP/IP protocol, the state of all. UNMS 3 108 91 UNMS license for 25 UNMS 3 108 92 UNMS license for 50 UNMS 3 108 93 UNMS license for 150 UNMS 3 108 94 UNMS license for 250 UNMS 3 108 95 UNMS license for 500 UNMS 3 108 96 UNMS license for 1000 RS232 USB Communicator or management software EXTENDED LOCAL PROTECTION Allows protecting a greater number of users (pc or server) but all depending on the COMPUTER controlling the. USB Comunicator or management software LAN RS system agent or RCCMD agent PROTECTION THROUGH TCP/IP NETWORK Allows controlling multiple users that can interact with the network card. Management of the entire system can be monitoring and controlled by each user. RS232 Any network interface LAN RCCMD agent RCCMD agent RCCMD agent CENTRALISED PROTECTION Through the UNMS monitoring software it is possible to control all connected to a TCP/IP network. RS232 Any network interface LAN/WAN RS232 UNMS Any network interface * after requesting the activation code. WWW..LEGRAND.COM ACCESSORIES COMMUNICATION 55
Services for the customer Reliability Excellence Specificity LEGRAND guarantees their customers the highest levels of product and service reliability. Quality, efficiency and innovation are the strong points of the entire LEGRAND Services range. A team of competent and professional specialists are available to satisfy diverse technical and sales requirements of the customer, in a quick and efficient manner in order to reduce machine down time. The needs of each individual customer are at the centre of the Services offer. LEGRAND offers customised Programmed Maintenance support, with customised service plans, with predefined license fees. 56
PowerCall PowerCall is a monitoring and remote diagnostics system that guarantees continual checking, thanks to a 24 / 7, 365 days a year connection with the operating control room. The PowerCall service ensures daily support, real time remote diagnostics and quick on-site intervention, in case of anomalies. During normal operation: The sends data to the operating control room, information is gathered, recorded and evaluated by a team of experts. Operational data is made available in a report that is periodically sent to customers. In case of anomaly, there are 3 different solutions, according to the seriousness level: Event recording. Remote problem resolution. Sending a technician on-site. In case of emergency: The technical department is responsible for the customer request in real time. The customer is immediately contacted to verify the conditions of the. A specialised technician goes on-site to repair the breakdown. Warranty Formulas There are two warranty formulas available to satisfy customer needs. EXCHANGE FORMULA Includes complete product replacement in case of breakdown or malfunction. After the anomaly has been discovered, the technical department sends the customer a module with the instructions necessary to replace the uninterruptable power supply. ON-SITE FORMULA Includes technician assistance and repair at the site where the product has been installed. In the standard on-site Formula, the intervention is foreseen within three work days after the call, two for MT series. The customer can choose a customised Formula if wanting to reduce intervention time even further. Pre and Post Sales Services DESIGN CONSULTING Support for designing systems with, conforming to current regulations. Definition of the most suitable solution based on customer needs. CONFIGURATION AND SIZING Verification of application requirements in order to protect and identify the most appropriate. SYSTEM ANALYSIS Detection of total system consumption trends and applications to be protected. WARRANTY MANAGEMENT Dedicated technical personnel and specialised services for standard products and warranty hotline. INSTALLATIONS Installation and commissioning on-site. PREVENTIVE MAINTENANCE Periodical maintenance in order to safeguard reliability over time and to prevent possible malfunctions or anomalies. REMOTE MANAGEMENT Remote management, real time diagnostics and automatic activation of repair services. BATTERY REPLACEMENT Turn-key replacement of battery packs. HW UPGRADES Upgrade of hardware power and uptime, for modular. WWW..LEGRAND.COM SERVIZI FOR THE CUSTOMER 57
58 NOTES
World Headquarters and International Department 87045 Limoges Cedex - France : + 33 (0) 5 55 06 87 87 Fax : + 33 (0) 5 55 06 74 55 AD-EXLG/12C/GB - 06/2012