Temperature Regulators Temperature regulation to maximize steam system efficiency
Self acting regulators, the simplest and most The rising cost of fuels heightens the need to control the production and use of heat more closely and effectively. To provide the right temperature for a process, to optimize energy usage, to provide comfort conditions, and for safety, automatic temperature control is necessary. Pilot Operated Temperature Regulators The Spirax Sarco range of Pilot Operated Temperature Regulators have been developed for close control of process temperature applications where steam is the chosen energy fluid. An important feature in the Spirax Sarco pilot operated range of temperature regulators is the ability to interchange or combine two or more pilots on the same regulator body. This unique feature permits, for example, remote on/off control together with temperature control. These variations are available factory fitted but can easily be added on site. Spirax Sarco offers a complete line of Temperature Regulators. These regulators give stable, modulating control within close tolerances. Properly applied, Spirax Sarco temperature regulators provides the most reliable and precise control available today. Combination of pilots allow for different types of control in one regulator. User benefits External power source is not required; therefore, reducing installation costs.* Improved process efficiency and product quality through accurate control of temperature. Accurate control of temperature with choice of seven pilot ranges. Reduced capital investment with temperature regulator combinations. Reduced stocking cost of spares due to interchangeable spare parts. Wide range of screwed and flanged connections to match plant standards. Spirax Sarco s guarantee of technical support, knowledge and service. * Except for E version. Body materials available in cast iron and steel to meet all plant requirements. Patented self scrubbing guide for long, trouble-free service. Fatigue tested diaphragm designed without a piston prevents danger of sticking. 2
reliable solution for controlling temperature Direct Operated Temperature Regulators The Spirax Sarco Direct Operated Temperature Regulators are for use on steam and liquid applications. The regulators give stable, modulating control within close tolerances. On storage and constant load applications they will control at set value. On variable load applications they will normally operate within a very narrow temperature band. Screwdriver adjustment for ease of setting temperature. Advanced manufacturing technology has been used to produce a range of highly durable and reliable temperature regulators to meet the needs of general industry applications. Clear display scale can rotate easily to read whichever way the controller is mounted. Body material available in bronze, cast iron and steel for heating and cooling. Six sensor types controlling temperatures from 0 F to 340 F Packless valve stem seals eliminate steam or water leakage. User benefits Low capital and installation cost one trade installation. Accurate and reliable for years of trouble free service. Plastic coated copper capillaries with standard length of 13 feet. Virtually maintenance free. Intrinsically safe operation. Simple to commission. Free from electrical or pneumatic breakdown. No expensive safety checks. 3
Self acting regulators 25T and 25TE The Spirax Sarco 25-Series are a versatile family of self acting temperature regulators with control pilots and interchangeable main valves for most steam applications. Options include temperature control (25T), combined temperature control with electrical on/off override (25TE). Designed with the user in mind, the 25-Series offers versatility and simplicity. Seven pre-calibrated temperature ranges are interchangeable throughout the range. The 25-Series is available in sizes 1/2" to 6" with screwed and flanged connections. A typical application includes hot water storage where constant water temperatures must be maintained while providing protection against excess temperature. 25T Model Shown 25 PT and 25 PTE The ability to combine multiple pilots for dual control purposes provides a cost competitive solution. Options include combined pressure and temperature control (25PT) and pressure, temperature control with electrical on/off override (25PTE) 25PT Model Shown Typical temperature control station using a pilot operated regulator Separator Float & Thermostatic Trap Strainer Isolation Valve (ball type) Strainer Spira-tec Trap Monitoring Chamber Pilot Temperature Regulator Isolation Valve (globe type) Typical temperature control station component overview Description Model Size Connection 1 Isolation valves (globe type) A3S, BSA3 1 /2"-8" Screwed & Flanged 2 Separator (target type) Model S1, S2, S3, S4A 1 /2"-8" Screwed & Flanged 3 Strainer Model IT, CT, Fig. 34 1 /2"-8" Screwed & Flanged 4 Temperature Regulator See tables above 1 /2"-6" Screwed & Flanged 5 Spira-tec Trap Monitoring Chamber Model ST17SG 1 /2"-1" Screwed 6 Float & Thermostatic Trap Model FTI 1 /2", 3 /4" Screwed 7 Isolation valves (ball type) Model 10, 20 1 /2"-6" Screwed & Flanged Pilot operated temperature regulator C v values Type 25T Series Size 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" C v 3.48 6.5 10.5 14 20 Size 2" 2 1 /2" 3" 4" 6" C v 35 56 74 115 260 4 Sensor overview table Sensor Type Valve Type Temperature Range Materials Capillary Length TIS# T1 25 Series, MT Series 30-320 F in 60 F steps Plain copper 8 ft. and 15 ft. 1.1123 T2 25 Series, MT Series 30-320 F in 60 F steps Copper with 3/4" NPT union 8 ft. and 15 ft. 1.1123 T3 25 Series, MT Series 30-320 F in 60 F steps Copper teflon coated 8 ft. teflon coat 1.1123 T4 25 Series, MT Series 30-320 F in 60 F steps Copper with flanged connection 8 ft. and 15 ft. 1.1123 T5 25 Series, MT Series 30-320 F in 60 F steps Copper with brass well 8 ft. and 15 ft. 1.1123 T6 25 Series, MT Series 30-320 F in 60 F steps Copper with stainless steel well 8 ft. and 15 ft. 1.1123 T7 25 Series, MT Series 30-320 F in 60 F steps T1 termostat bulb with Brass 8 ft. and 15 ft. 1.1123 18" extension well T8 25 Series, MT Series 30-320 F in 60 F steps T1 thermostat bulb with stainless 8 ft. and 15 ft. 1.1123 steel, 18"extension well T9 25 Series, MT Series 30-320 F in 60 F steps T1 thermostat blub with wall 8 ft. and 15 ft. 1.1123 mounting bracket T10 25 Series, MT Series 30-320 F in 60 F steps Bulb in stainless steel 8 ft. stainless steel 1.1123 T11 25 Series, MT Series 30-320 F in 60 F steps Bulb in stainless steel with union 8 ft. stainless steel 1.1123 connection 3/4" NPT T12 25 Series, MT Series 30-320 F in 60 F steps Blub in plain copper with union 8 ft. brass armored 1.1123 connection at 90 offset HL10 B, K, N & S Series 32 F to 212 F Brass. Optional wells in 6.5 ft. 1.1000 brass, steel or stainless steel 121, 122 B, K, N & S Series 5 F to 320 F in Brass. Optional wells in 13 ft. 1.900 & 123 60 F or 120 F steps brass, steel or stainless steel
A range of solutions Pilot and direct operated temperature regulator overview Connections Body Material Max. Operating ANSI ANSI ANSI Cast Cast Stainless Yellow Conditions TIS Product Type NPT 125 150 300 Iron Steel Steel Metal F psig # 25T, 25PT 1 /2"-2" 2 1 /2"-6" 2 1 /2"-6" 2"-6" Yes Yes CI = 0-450 250 1.1116(1) 25TE* CS = 0-600 300 3.018 25MT 1 /2" Yes Yes CI = 0-450 250 1.1125 CS = 0-600 300 T44 1 /2"-1" Yes 250 125 1.1113 BX 1 /2" Yes BX = 0-450 250 1.800 BXRA BXRA = 0-425 150 SB/SBRA 1 /2"-1" Yes Consult TIS 1.801 KA/KB/KC 1"-2" Yes Consult TIS 1.803 KX/KY 1"-2" Ye Consult TIS 1.804 TW 3 /4"-1 1 /2" Yes 392 50 1.809 KA43/KB43/KC43 1"-2" Yes Yes Consult TIS 1.808 BM/BMRA 1 /2" Yes Yes 0-450 BM=250 1.807 *Maximum operating condition for PT is limited to 450 F, TE is limited to 392 F. 25MT The 25MT direct operated temperature regulator is designed for accurate control of very light loads. The 25MT is available in the 1/2" size with screwed connections, and cast iron or steel body construction. This durable, compact regulator offers a competitive solution to uncomplicated steam applications. B, K, N and S Valve Range with 100 Series Controllers These simple, versatile direct operating temperature regulators are designed for customers where reliability and ease of use are important. These regulators give stable, modulating control within close tolerances. Because the Spirax Sarco controllers operate through liquid expansion within friction free bellows, they have a long maintenance free life with repeatable performance. Set and forget is the normal method of using these regulators. Even where temperature settings must vary, operators find them quick andsimple to operate. The uncomplicated construction and small number ofcomponents makes this range easy to understand so installation is straight forward. The complete range for heating or cooling is available in bronze, cast iron or steel construction with threaded or flanged connections. SB Valve with 121 Controller Shown HL10-130 High Limit Cut Out The HL10-130 regulator is a self-acting safeguard against overheating. Even the best temperature controls can fail often through no fault of their own. Whatever the cause, the effect of failure can be serious and may lead to injury or even loss of life. The Spirax Sarco HL10-130 automatically shuts off heat at its source in the event of a temperature overrun. The type 130 control system is the sensing device and features self-acting operation and fail safe even if capillary is damaged. The HL10 snaps the isolation valve shut if the preset high limit temperature is exceeded. The HL10 features manual reset, visual red indicator and micro switch facility for remote audio/visual indicator. Direct operated temperature regulator C v values BMRA=150 Type BX/BXRA SB/SBRA BM All K Series TW T44 25MT Size 1/2" 1/2" 3/4" 1" 1/2" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3/4" 1" 1-1/2" 1/2" 3/4" 1" 1/2" C v 1.92 3 4.5 7.9 1.92 3.36 5.4 11.4 19.2 27.6 39.6 5.4 10.5 24 3 7.49 5
Typical applications for self acting temperature regulators Bulk water storage One popular application for self acting pilot regulators is bulk water storage when used for process vessel cleaning or hospital showers and baths. This application requires a constant hot water temperature while providing protection against excessive temperatures. The Spirax Sarco 25T combined with an HL10-130 provides these functions. Controlling a batch process vessel In this example, a combination of pressure limiting, temperature control, and on/off switching is used in a 25PTE Series valve. This displays the versatility of self acting pilot regulators in fixing the maximum steam pressure and temperature limit to avoid excessive vessel wall temperatures, then controlling temperature within this limit for heat up and run conditions. The on/off solenoid is used to begin and end the heat cycle, plus shut down the steam on safety alarms. Boiler feed tanks An essential part of boiler feed water conditioning is the need to drive out dissolved oxygen through heating to a temperature in excess of 180 F. The direct operated temperature regulator cost effective, set and forget characteristics are ideal for this. Within the application shown, the temperature regulator is combined with the Spirax Sarco injector for silent and efficient steam penetration into the vessel. Air compressor cooling Air compressors call for modulating temperature control valves which will start up in the closed state and provide a minimum bleed through the jacketed air receiver for sensing purposes. As the water temperature increases, the control valve will open to allow cold water into the jacketed air receiver. 6
How self acting temperature regulators work Heating Cooling Pilot Bellows Control Spring Pilot Valve Head & Seat Orifice Bulb Flow Plug Movement caused by temperature change at sensor Plug Flow Main Valve Head & Seat Thrust Pin Temperature Sensor Thrust Pin Control Pressure Spring loaded piston mechanism for temperature adjustment and overload Main Valve Diaphragm How the 25T pilot regulator works The Spirax Sarco pilot operated temperature regulator works by converting the process temperature to a force which is balanced by the control spring. This modulates a small valve head over a seat (the pilot). The flow through this seat is directed in turn to the main valve diaphragm, where it modulates the main valve. In order to achieve the most stable operating condition, the sensing bulb must be immersed entirely in the sensed medium. This allows the liquid in the bulb to expand through the capillary tubing into the bellows and throttles the pilot valve. This settles the pilot valve, allowing constant flow across the main diaphragm. When process temperature rises, the pilot valve closes, and pressure is released from the main valve diaphragm through the control orifice to close the main valve. Any variations in temperature will immediately be sensed on the bulb, which will act to adjust the position of the pilot and main valve, ensuring a constant process temperature. How to order When ordering a Spirax Sarco 25T temperature regulator, include all of the following: Valve size by nominal pipe/flange size Body material of cast iron or cast steel Type of sensor - 25T for thermostatic regulation Style of thermostatic bulb Length of capillary tubing Temperature adjustment range Maximum steam supply pressure. Specify low pressure pilot when inlet pressure for flanged sizes is 15 psig or below. Intended application How direct operated temperature regulators work A change in temperature at the sensor will cause the liquid filling to expand or contract. If the liquid expands it will apply a force on the thrust pin which, in turn, will cause the valve plug to move. As the liquid contracts, the force on the valve plug reduces and a spring reverses its direction of travel. For heating applications, the valves will normally be open and will close against a rise in temperature. For cooling applications, the valves will normally be closed and will open against a rise in temperature. How to order When ordering a Spirax Sarco 121 temperature regulator, include all of the following: Valve size by nominal pipe/flange size Body material of cast iron or cast steel Type of sensor - 121 for thermostatic regulation Style of thermostatic bulb or union nut Length of capillary tubing Temperature adjustment range Maximum steam supply pressure Intended application For example: Spirax Sarco 1" Cast Iron Screwed Regulator with 121 Regulator having temperature set value of 180 F, 13 ft. capillary, and bulb with 3/4" NPT union nut. For example: Spirax Sarco 1" Cast Iron Temperature Regulator, Type 25T-2 with 8 feet of tubing, temperature range of 120 to 180 F, 75 psig steam, for storage water heater. 7
W MW NE MA SW SE For more information on Spirax Sarco, contact your Regional Hub Office below, or call 1-800-883-4411 and you will be connected to the location nearest you. REGIONAL HUB OFFICES NORTHEAST New England Hub Office 209 W. Central Street Suite 228 Natick, MA 01760 Phone: (508) 651-3200 Fax: (508) 655-9434 Columbus, Ohio Hub Office 7760 Olentangy River Road Suite 120 Columbus, OH 43235 Phone: (614) 436-8055 Fax: (614) 436-8479 MID-ATLANTIC 4647 Saucon Creek Road Suite 102 Center Valley, PA 18034 Phone: (610) 807-3500 Fax: (610) 317-3279 SOUTHEAST 200 Centre Port Drive Suite 170 Greensboro, NC 27409 Phone: (336) 605-0221 Fax: (336) 605-1719 MIDWEST 2806 Centre Circle Drive Downers Grove, IL 60515 Phone: (630) 268-0330 Fax: (630) 268-0336 1150 Northpoint Blvd. Blythewood, SC 29016 Phone: (803) 714-2000 Fax: (803) 714-2200 www.spiraxsarco.com/us SOUTHWEST 203 Georgia Ave. Deer Park, TX 77536 Phone: (281) 478-4002 Fax: (281) 478-4615 WEST 1930 East Carson Street Suite 102 Long Beach, CA 90810 Phone: (310) 549-9962 Fax: (310) 549-7909 Printed in USA 11/01 Copyright 2001