Domestic Hot Water Recirculation Systems Application, Selection & Installation Guide

Transcription

1 Water Circulation Pumps & Circulators Domestic Hot Water Recirculation Systems Application, Selection & Installation Guide Taco Catalog # Supersedes: 08/07/15 Effective Date: 09/01/15 Printed in USA

2 Domestic Hot Water Recirculation The Problem: Waiting for Hot Water It s a common problem: turn on the faucet or shower for hot water, then wait for it to arrive. In fact, the wait can be minutes in larger homes with multiple bathrooms and long runs of pipe between the plumbing fixtures and the water heater! With a Taco Domestic Hot Water Recirculation System in place, there s no more wait. Instant hot water! Energy Down The Drain Of course, all that waiting water contains some heat energy (BTU s), even if it s only room temperature. Wasting those BTU s and starting over with fresh, cold water to heat up requires even more heat energy. So in addition to wasting water, millions of BTU s and energy dollars are wasted, too. The Solution: Install a Taco Domestic Hot Water Recirculation (DHWR) Product Provide your customers with the comfort and convenience of instant hot water without the waste. Taco DHWR products are designed to meet a variety of DHWR system types, and offer customers a variety of options to control hot water delivery to faucets and showers. System Types & Products Dedicated return line piping. This system is provided with a dedicated return line installed between the end of the hot water supply pipe and the water heater. A circulator is installed in the piping loop to move the hot water from the tank through the supply pipe and back through the return pipe. Waiting Means Wasting Waiting for hot water sends millions of gallons of cooled water down the drain each year. In fact, an average family of four wastes up to 12,000 gallons of water each year waiting for hot water.* Water conservation is so important that many US states and municipalities routinely impose watering bans and offer rebate incentives to help conserve this natural resource. *Source: Dept. of Energy study. Taco provides three great options for this system: Plumb N'Plug SmartPlus TacoGenie Piping without a return line. A domestic hot water system without a dedicated return line requires a "point of use" product that is typically installed at the fixture furthest from the hot water heater. The cold water supply pipe is used as the return line to the water heater. Taco provides three great options for this system: Hot-Link System Hot-LinkPlus System TacoGenie -2-

3 Typical Installation & Piping One-Story with 1 Water Heater One-Story with 2 Water Heaters Multi-Story with 1 Water Heater Multi-Story with 2 Water Heaters Recirculation Piping with Indirect Water Heater Recirculation Piping with Storage Water Heater & Mixing Valve Sink Shower Tub Dish Washer Clothes Washer Hot Water Supply Indirect Water Heater Cold Water Supply Boiler Hot Water Return Circulator Pump -3-

4 Choosing the Correct Circulator for the Job Performance Field Information - 60 Hz TOTAL HEAD FEET DOMESTIC WATER RECIRCULATION MODELS (STD) FLOW - M 3/H FLOW - GPM TOTAL HEAD METERS TOTAL HEAD FEET DOMESTIC WATER RECIRCULATION MODELS (IFC) FLOW - M 3/H IFC IFC IFC FLOW - GPM TOTAL HEAD METERS Pump Selection Charts This information is provided as a guide only. Larger models are available. For larger systems, consult your local Taco representative. Find the table below that best describes the design you plan to use. Select the pump model based on the supply and return pipe length, size and pump options. Do not oversize the pump or high velocity noise and erosion corrosion of system piping may result. 1/2" Supply & 1/2" Return Lines 3/4" Supply & 3/4" Return Lines Maximum Maximum IFC* IFC* 3/4" Supply & 1/2" Return Lines 1" Supply & 1/2" Return Lines , , ,800 2, ,500 2,700 Maximum 3/4" Supply & 3/4" Return Maximum Lines 1/2" Supply 003 & 1/2" Return Lines IFC* IFC* , ,000 1" Supply & 3/4" Return Lines Maximum 3/4" Supply 003 & 1/2" Return Lines600 1,500 1,200 2,500 1,200 3,000 1,200 2,500 Assumptions: Flow = 1 GPM Max. Velocity = 3 ft./sec. 1" Supply & 1/2" Return Lines Allowances have been added for pressure drop of other typical system components Type L Copper Tubing Supply & Return Piping are equal in length -4-1" Supply & 3/4" Return Lines

5 Submittal Data Information See Taco Catalog # and Submittal Datasheet for full details. How SmartPlus works The SmartPlus circulator has a mode select toggle switch that allows for 2 operation modes. Pulse or Smart mode can be selected using the toggle switch located on the capacitor base mounted electronic control board. A yellow LED indicates which mode is selected. All operation is automatic, no manual timer or temperature setting is required. Pulse Mode When set for Pulse mode, the SmartPlus circulator will run for 150 seconds every 10 minutes to maintain hot water at all fixtures. Smart Mode When set for Smart mode, the circulator will run in Pulse mode as above for the first 7 days. During the first 7 days, the SmartPlus will monitor and record the homes hot water usage pattern. For the next 7 days, the SmartPlus will use the preceding week s usage pattern to cycle the pump. This process will be repeated every 7 days. Features and Benefits Vacation Function After 36 hours of inactivity the pump will automatically TURN OFF and remain off until hot water usage is detected again. Exercise Function While in vacation mode the pump will cycle on once every 7 days and run for 10 seconds to prevent any corrosion or scale buildup. Factory installed 6 line cord Remote Sensor Included Optional IFC (Integral Flow Check) Quiet, Efficient Operation Unique Replaceable Cartridge Design-Field Serviceable Self-Lubricating No Mechanical Seal Unmatched Reliability Maintenance Free Comfort and Convenience Once the pump is set to the desired operating mode it never needs to be set again. Hot water is always available in seconds. Efficiency Smart operation maximizes hot water comfort and energy savings. Reliability The SmartPlus provides quiet operation and industry leading electronics with Taco s 00 circulator proven performance & dependability. 3 Year Warranty LED Indicator lights GREEN Power YELLOW Mode RED Sensor Connection Circulator: Stator Housing...Steel Cartridge...Stainless Steel Impeller...Noryl Shaft...Ceramic Bearings...Carbon Casing (Volute)...Bronze, Sweat Stainless Steel, Threaded Stainless Steel, Flanged Integral Flow Check (IFC ): Body & Plunger...Acetal Spring...Stainless Steel Plumb n' Plug Circulators See Taco Catalog # and Submittal Datasheet for full details. Features with Analog Timer Factory Installed 6 Line Cord and 24 Hour/15 Minute Interval Analog Timer UL Listed Optional 95 F 115 F Aquastat Available Standard High Capacity Output Compact Design Quiet, Efficient Operation Direct Drive-Low Power Consumption Unique Replaceable Cartridge Design-Field Serviceable Self Lubricating No Mechanical Seal Unmatched Reliability-Maintenance Free Sweat Connections Bronze Union & Threaded Connections St. Steel Flanged St. Steel Additional Features with Digital Timer Digital Timer, 7 day Programmable Large LCD Display Easy-to-Use Program Buttons On/Off Intervals as Short as 1 Minute 2,500 hour Capacitor Backup, Saves Settings Circulator: Casing (Volute)...Bronze or Stainless Steel Stator Housing...Steel Cartridge...Stainless Steel Impeller...Non-Metallic Shaft...Ceramic Bearings...Carbon Integral Flow Check (IFC ): Body & Plunger...Acetal Spring...Stainless Steel -5-

6 Submittal Data Information See Taco Catalog # and Submittal Datasheet for full details. For New or Retrofit Installations Using the existing cold water line as the return line, TacoGenie is ideal for both new and retrofit installations. Typically installed at the furthest fixture from the water heater, TacoGenie fits out of the way, under any bathroom vanity. Connections are made from the hot and cold lines to the suction and discharge side of the pump using adapter tees and stainless flex lines provided. When hot water is needed, the pump is activated by pressing a starter button, runs only long enough to supply hot water to the fixture and then automatically stops. This prevents hot water from entering the cold line. A spring-loaded Integral Flow-Check valve (IFC ) prevents cold water from entering the hot line. Optional wireless push button or motion sensor starters are also available. Features and Benefits of the TacoGenie Instant Hot Water Comfort Maximum Water & Energy Savings 24 Hour operation Maintenance free circulator - unmatched reliability Removable stainless steel cartridge - contains all moving parts UL listed Integral Flow-Check (IFC ) to prevent thermo-siphoning or gravity flow Pre-wired power cord and integral temperature sensor Adapter tees & stainless steel flex lines included (USK models only) Wireless Push Button remote or motion sensor starter-optional Ideal for tankless water heaters TacoGenie includes: TacoGenie Circulator Hard Wire Push Button (2) Copper T's (USK models only) (2) Flex Hoses (USK models only) RF Wireless Starter Kit (Optional) Motion Sensor (Optional) Circulator: Casing (Volute)...Stainless Steel Stator Housing...Steel Cartridge...Stainless Steel Impeller...Noryl Shaft...Ceramic Bearings...Carbon Integral Flow Check (IFC ): Body & Plunger...Acetal -6-

7 Submittal Data Information Ingenious instant hot water See Taco Catalog # and Submittal Datasheet for full details. Instant hot water. No additional plumbing or electrical needed! Hot-Link is a quick, easy retrofit using the existing plumbing. Mount the valve under the sink and the pump at the water heater. The valve's unique thermal disk technology sends cooled water back to the water heater so hot water lines remain hot. Cleaning made easy. There's no need to remove the Hot-Link valve from the piping to keep it clean. Our exclusive clean-in-place design makes short work of keeping the system operating properly. From Water Heater To Water Heater Features: Exclusive clean in place undersink valve design - Extends valve life - Reduces customer calls to replace plugged valves Creates a domestic hot water recirculation system without dedicated return loop piping Easy to retrofit to existing plumbing system Conserves water by greatly reducing the time it takes to get hot water Analog pump timer allows you to set the system to work during peak hours or to work continuously 3 Year Warranty Hot-Link Valve Closed Hot-Link Valve Open The HotLink System Includes: Hot-Link Valve Hot-Link Circulator (2) Braided Flex Hoses Circulator: Casting (Volute)...Stainless Steel Stator Housing...Steel Cartridge...Stainless Steel Impeller...Noryl Shaft...Ceramic Bearings...Carbon O-Ring...EPDM HotLink installation is a snap because it uses the existing plumbing. Hot-Link Valve: Body...Nylon Thermal Disk Actuator...Bi-Metal O-Ring Seals...EPDM Integral Flow Check (IFC ): Body, Plunger...Acetal O-Rings...EPDM Screen SS Stem...Nylon Actuator Cartridge...Stainless Steel Braided Flex Hoses...Stainless Steel -7-

8 Submittal Data Information TM The Taco Hot-LinkPlus features a smart circulator that learns household hot water usage patterns and makes hot water available at the same times the following week. If water usage changes the Hot-LinkPlus circulator adapts for you. It never needs programming! The Hot-LinkPlus bypass valves unique thermal disk technology sends cooled water back to the water heater so hot water lines remain hot. The Hot-LinkPlus Includes: Hot-Link Valve Hot-LinkPlus Circulator (2) Flex Hoses (2) Half Unions with Tail Pieces Freedom FLANGE Shut-Off Bronze Stainless Steel System Connection Sweat BSF BSF - See Taco Catalog # and Submittal Datasheet for full details. Features of Hot-LinkPlus Circulator: Up to 94% more energy efficient than standard recirculation circulators. Fully automatic. Never needs programming. LED Display. Vacation Function. 3-year warranty. Circulator & Union: Casting (Volute)...Stainless Steel Stator Housing...Steel Cartridge...Stainless Steel Impeller...Noryl Shaft...Ceramic Bearings...Carbon O-Ring...EPDM Half Unions...Stainless Steel Tail Pieces...Stainless Steel Domestic Hot Water Accessories NPT BF SF Freedom FLANGE Freedom FLANGE Shut-Off Bronze Stainless Steel Unions Features of Hot-Link Valve: Exclusive clean in-place design. Saves time, water and energy. Easy to install. Ideal for home retrofits. No recirculation line necessary. Hot-Link Valve: Body...Nylon Thermal Disk Actuator...Bi-Metal O-Ring Seals...EPDM Integral Flow Check (IFC ): Body, Plunger...Acetal O-Rings...EPDM Screen SS Stem...Nylon Actuator Cartridge...Stainless Steel Braided Flex Hoses...Stainless Steel System Connection Sweat NPT System Connection BSF BSF - Sweat BF SF NPT Analog Timer Digital Half Unions Timer Aquastat Unions System Connection Sweat NPT Plumb n Plug Accesories Half Unions Half Unions Analog Timer Kit Digital Timer Kit Aquastat Plumb n Plug Accesories Analog Timer Kit Digital Timer Kit Aquastat Taco Inc., 1160 Cranston Street, Cranston, RI / (401) / Fax (401) Taco (Canada) Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / (905) / Fax (905)