METAL AND INSULATING BOXES AND ENCLOSURES Presentation 4/2 Selection guide 4/4 D/DX Boxes and enclosures 4/8 DPC Junction boxes 4/12 IBS/IBP Insulated industrial boxes 4/16
Metal and insulating junction boxes and enclosures This line of products suits a very wide range of applications, from cable connection to protection of electronic components. A wide range of models with perfectly-studied dimensions, metal and insulating materials that feature ideal characteristics and numerous versions: with lid or transparent doors, bases with or without knock-outs for cable passage, devices for fixing material or mounting plates, etc. With all these options, this series offers many application possibilities. METAL D-DX Degree of protection No. of sizes/models Dimensions (mm) Material Insulated From to IP55 20/40 85 85 49 35 30 210 Enclosure features Metal Sides Membrane glands c Knock-outs Plain Lids Opaque Transparent Mounting plates c c c c Page 4/8 4/2
c D-DX junction boxes and metal enclosures: Made of sheet steel protected inside and out with polyester epoxy paint, ranges with plain sides or knock-outs, high and low lids. c DPC insulated junction boxes: Made of self-extinguishing polycarbonate and double insulation. The bases are equipped with grooves for fixing equipment. c IBS-IBP insulated junction boxes: Made of ABS or polycarbonate, insulating, self-extinguishing and halogen free. With opaque or transparent lid, equipped with sealing gasket and grooves in the base and lid for fixing equipment. The IBS-IBP boxes and their many accessories are designed to meet the requirements of a wide range of applications. INSULATED DPC IP55 10/10 83 83 50 389 310 130 INSULATED IBS-IBP IP65 22/123 4 4 54 341 291 168 ABS ABS/polycarbonate c c c c c c c c c 4/12 4/18 4/3
BOXES AND ENCLOSURES Selection guide D-DX Metal boxes Metal enclosures Without knock-outs With knock-outs Without knock-outs With knock-outs Box dimensions (mm) Mounting plates Height Width Depth Low lid High lid Low lid High lid Low lid High lid Low lid High lid 85 85 49 DBN 8/8 - DB 8/8M - - - - - - 105 105 49 DBN 10/10 - DB 10/10M - - - - - - 155 105 61 DBN 15/10 - DB 15/10M - - - - - PMD 1510 206 156 83 DBN 20/15 - DB 20/15M - DBNX 20/15 - DBX 20/15M - PMD 2015 256 206 93 DBN 25/20 - DB 25/20M - DBNX 25/20 - DBX 25/20M - PMD 2520 30 25 116 DBN 30/25 - DB 3025M - DBNX 30/25 - DBX 30/25M - PMD 3025 35 30 136 DBN 35/30 - DB 35/30M - DBNX 35/30 - DBX 35/30M - PMD 3530 155 105 88 - DAN 15/10 - DA 15/10 - - - - PMD 1510 206 156 122 - DAN 20/15 - DA 20/15 - DANX 20/15 - DAX 20/15M PMD 2015 256 206 140 - DAN 25/20 - DA 25/20 - DANX 25/20 - DAX 25/20M PMD 2520 30 25 14 - DAN 30/25 - DA 30/25 - DANX 30/25 - DAX 30/25M PMD 3025 35 30 210 - DAN 35/30 - DA 35/30 - DANX 35/30 - DAX 35/30M PMD 3530 Page 4/9 4/9 4/9 4/9 4/11 4/11 4/11 4/11 4/9 DPC With membrane glands Box dimensions (mm) Mounting plates Height Width Depth Ø 0 44 DPC 65 - Ø 85 48 DPC 80-88 88 45.5 DPC 8/8-108 108 56.5 DPC 10/10-123 83 60 DPC 12/8-158 108 66.5 DPC 15/10 PMDP 1510 208 158 83.5 DPC 20/15 PMDP 2015 258 208 9 DPC 25/20 PMDP 2520 306 226 125 DPC 30/22 PMDP 3022 389 310 130 DPC 40/30 PMDP 4030 Page 4/12 4/12 4/4
IBS-IBP ABS Polycarbonate UL Polycarbonate Box dimensions (mm) IP66 - IK0 IP66 - IK0 IP66 - IK0 Height Width Depth High lid Opaque lid Transparent lid Opaque lid Transparent lid Transparent lid Transparent lid 4 4 54 10 IBS /5 - IBP /5 - IBP /5UL - 89 89 54 10 IBS 88/5 - IBP 88/5 - IBP 88/5UL - 116 4 62 10 IBS 11/6 - IBP 11/6 - IBP 11/6UL - 116 4 94 43 IBS 11/9 - - - - - 116 116 62 10 IBS 1111/6 - IBP 1111/6 - IBP 1111/6UL - 116 116 133 80 IBS 1111/13 - - - - - 138 93 2 20 IBS 139/ IBS 139/T IBP 139/ IBP 139/T IBP 139/UL IBP 139/TUL 164 121 8 20 IBS 1612/8 IBS 1612/8T IBP 1612/8 IBP 1612/8T IBP 1612/8UL IBP 1612/8TUL 192 121 8 20 IBS 1912/8 IBS 1912/8T IBP 1912/8 IBP 1912/8T IBP 1912/8UL IBP 1912/8TUL 192 121 105 20 IBS 1912/10B IBS 1912/10BT IBP 1912/10B IBP 1912/10BT IBP 1912/10BUL IBP 1912/10BTUL 192 121 105 40 IBS 1912/10 IBS 1912/10T IBP 1912/10 IBP 1912/10T IBP 1912/10UL IBP 1912/10TUL 193 164 8 20 IBS 1916/8 IBS 1916/8T IBP 1916/8 IBP 1916/8T IBP 1916/8UL IBP 1916/8TUL 193 164 105 40 IBS 1916/10 IBS 1916/10T IBP 1916/10 IBP 1916/10T IBP 1916/10UL IBP 1916/10TUL 241 194 8 20 IBS 2419/8 IBS 2419/8T IBP 2419/8 IBP 2419/8T IBP 2419/8UL IBP 2419/8TUL 241 194 105 40 IBS 2419/10 IBS 2419/10T IBP 2419/10 IBP 2419/10T IBP 2419/10UL IBP 2419/10TUL 241 194 12 60 IBS 2419/12 IBS 2419/12T IBP 2419/12 IBP 2419/12T IBP 2419/12UL IBP 2419/12TUL 291 241 88 20 IBS 2924/8 IBS 2924/8T IBP 2924/8 IBP 2924/8T IBP 2924/8UL IBP 2924/8TUL 291 241 128 20 IBS 2924/12 IBS 2924/12T IBP 2924/12 IBP 2924/12T IBP 2924/12UL IBP 2924/12TUL 291 241 128 60 IBS 2924/12A IBS 2924/12AT IBP 2924/12A IBP 2924/12AT IBP 2924/12AUL IBP 2924/12ATUL 291 241 168 60 IBS 2924/16 IBS 2924/16T IBP 2924/16 IBP 2924/16T IBP 2924/16UL IBP 2924/16TUL 341 291 128 20 IBS 3429/12 IBS 3429/12T IBP 3429/12 IBP 3429/12T IBP 3429/12UL IBP 3429/12TUL 341 291 168 60 IBS 3429/16 IBS 3429/16T IBP 3429/16 IBP 3429/16T IBP 3429/16UL IBP 3429/16TUL Page 4/19 4/19 4/19 4/19 4/19 4/19 4/5
Insulated and metal junction boxes Boxes and enclosures made of sheet steel protected inside and out with polyester epoxy paint in grey RAL-032. 1 2 5 4 3 1 With metric knock-outs for tube entry, and plain. 2 Two versions available: with high or low lid. 3 Bases equipped with threaded drill holes for fixing equipment. From model 15/10 and up, there are four M4 threaded holes fitted with removable plugs for direct fixing of the mounting plate. Direct wall-fixing. 4 PVC or rubber sealing gasket depending on the model. 5 Double bar lock with wing key can be installed as a handle lock. Other lock inserts are available. 4/6
Insulated boxes in ABS, grey RAL-035 unaffected by outdoor conditions. 1 2 3 4 1 Sealable screws. 2 Self-tapping grooves to fix terminal strips, DIN rails or equipment. 3 Possibility of installing mounting plates. 4 Safety lids and screws. 4/
D Pressed steel junction boxes IP55 (EN 60529) except models with knock-outs DA 25/20M DBN 15/10 Metal boxes made of sheet steel protected inside and out with textured polyester epoxy paint in grey RAL-032. The D series consists of 4 basic models: c Without knock-outs: DBN with low lid and DAN with high lid. c With knock-outs: DB with low lid and DA with high lid. c PVC sealing gasket on sizes up to 20/15 and a rubber gasket for 25/20, 30/25 and 35/30. c Bases ready for threaded drill holes for fixing equipment. From size 15/10 and up, there are four M4 threaded holes fitted with removable plugs for direct fixing of the mounting plate. c Direct wall-fixing by means of drill holes fitted with plastic plugs to ensure watertightness. 4/8
D Pressed steel junction boxes IP55 (EN 60529) except models with knock-outs M20 20.5 M25 25.5 M20 20.5 M25 25.5 M32 32.5 Group No. 1 Group No. 2 M20 20.5 M25 25.5 M25 25.5 M32 32.5 M40 40.5 M32 32.5 M50 50.5 Group No. 3 Group No. 4 M40 40.5 Dimensions (mm) FIG. 1 DBN DAN DB DA C 2.5 B D E F C 2.5 B D E F C 2.5 B D E F C 2.5 B D E F A A A A MODELS, DIMENSIONS AND REFERENCES Low lid models High lid models External dimensions (mm) Height (A) Width (B) Prof. (C) Models without knock-outs Models with knock-outs, No. of drill holes, knock-outs and group Dimensions (mm) Reference Reference Length (A) Width (B) D E F Mounting plate Weight (kg) 85 85 49 DBN 8/8 DB 8/8M 1 No. 1 1 No. 1 58 58 - - 0.18 105 105 49 DBN 10/10 DB 10/10M 2 No. 1 1 No. 1 6 6 - - 0.25 155 105 61 DBN 15/10 DB 15/10M 3 No. 2 1 No. 2 124 4 56 PMD 1510 0.38 206 156 83 DBN 20/15 DB 20/15M 3 No. 3 2 No. 3 12 122 8 PMD 2015 1 256 206 93 DBN 25/20 DB 25/20M 3 No. 4 2 No. 4 220 10 88 PMD 2520 1.5 30 25 116 DBN 30/25 DB 30/25M 2 No. 3, 2 No. 4 3 No. 4 268 218 110 PMD 3025 3.3 35 30 136 DBN 35/30 DB 35/30M 2 No. 3, 3 No. 4 2 No. 3, 2 No. 4 318 268 130 PMD 3530 4.8 155 105 88 DAN 15/10 DA 15/10M 3 No. 2 1 No. 2 124 4 83 PMD 1510 0.45 206 156 122 DAN 20/15 DA 20/15M 3 No. 3 2 No. 3 12 122 121 PMD 2015 1.2 256 206 140 DAN 25/20 DA 25/20M 3 No. 4 2 No. 4 220 10 131 PMD 2520 1.9 30 25 14 DAN 30/25 DA 30/25M 2 No. 3, 2 No. 4 3 No. 4 268 218 168 PMD 3025 4 35 30 210 DAN 35/30 DA 35/30M 2 No. 3, 3 No. 4 2 No. 3, 2 No. 4 318 268 204 PMD 3530 5.8 4/9
DX Small metal enclosures IP55 (EN 60529) except models with knock-outs DBX 30/25 DAX 30/25 Metal enclosures made of sheet steel protected inside and out with textured polyester epoxy paint in grey RAL-032. The DX series consists of four basic models: c Without knock-outs: DBNX with low lid and DANX with high lid. c With knock-outs: DBX with low lid and DAX with high lid (on the top and base). c Enclosures fitted with sealing gasket and M4 threaded holes fitted with removable plugs for fixing the mounting plate and/or equipment in general. c Standard double bar lock operated with wing key (standard supply). Fixing this wing key to the lock will convert it into a double bar handle lock. See other lock possibilities in the insert table. 4/10
DX Small metal enclosures IP55 (EN 60529) except models with knock-outs M20 20.5 M25 25.5 M20 20.5 M25 25.5 M32 32.5 Group No. 1 Group No. 2 M20 20.5 M25 25.5 M25 25.5 M32 32.5 M40 40.5 M32 32.5 M50 50.5 Group No. 3 Group No. 4 M40 40.5 Dimensions (mm) FIG. 1 DBNX DBX DANX DAX B 4 B 4 B 4 B 4 C 2.5 D G E F A C 2.5 D G E F A D 2.5 C G E F A D 2.5 C G E F A 6 6 G G MODELS, DIMENSIONS AND REFERENCES Low lid models High lid models External dimensions (mm) Models without knock-outs Models with knock-outs Dimensions (mm) Mounting Height Width Depth plate Reference Reference Length (A) D E F G (A) (B) (C) Weight (kg) 206 156 83 DBNX 20/15 DBX 20/15M 2 No. 3 12 122 8 55 PMD 2015 1 256 206 93 DBNX 25/20 DBX 25/20M 2 No. 4 220 10 88 55 PMD 2520 1.5 30 25 116 DBNX 30/25 DBX 30/25M 3 No. 4 268 218 110 55 PMD 3025 3.3 35 30 136 DBNX 35/30 DBX 35/30M 2 No. 3, 2 No. 4 318 268 130 55 PMD 3530 4.8 206 156 122 DANX 20/15 DAX 20/15M 2 No. 3 12 122 121 45 PMD 2015 1.2 256 206 140 DANX 25/20 DAX 25/20M 2 No. 4 220 10 131 45 PMD 2520 1.9 30 25 14 DANX 30/25 DAX 30/25M 3 No. 4 268 218 168 45 PMD 3025 4 35 30 210 DANX 35/30 DAX 35/30M 2 No. 3, 2 No. 4 318 268 204 45 PMD 3530 5.8 Lock variants Type and size Operated with a key Reference Square lock Triangle lock c 6 mm c mm c 8 mm 6 mm mm 8 mm LC- LC- LC-8 LT-8 LT-8 LT-8 TC6/CRN TC/CRN TC8/CRN TT6/CRN TT/CRN TT8/CRN 405 key-type lock CL/CRN 4/11
DPC Insulated junction boxes IP55 (EN 60529) DPC 30/22 DPC 80 DPC 10/10 Insulated boxes consisting of base and cover made of ABS in RAL-035, unaffected by outdoor conditions. Conform to the IEC 60998-1 and 60998-2-5 standards. c Self-extinguishing (650 C), double insulation, high impact resistance. c Equipped with adjustable membrane glands for cable and tube entries. c Wide dimensional range up to 10 models from 66 mm to 400 300 mm. c Bases equipped with grooves for fixing terminal strips, DIN rails or equipment using self-tapping screws. c Touch latch up to model 100 100 (IP44). For larger models, quick and reliable closing with metal or insulated safety screws depending on the model (IP55). c Bases prepared for direct fixing to the wall, always maintaining watertightness and double insulation due to the built-in plastic plugs. c Safety screws and hinges for the DPC 30/22 and DPC 40/30 models. c AC insulation voltage: 400 V. MODELS, DIMENSIONS AND REFERENCES External dimensions (mm) Height Width Depth Reference Membrane gland No. and type Type of lock Mounting plate 0 44 DPC 65 4 max. 20 mm Touch latch - 85 48 DPC 80 4 max. 20 mm Touch latch - 83 83 50 DPC 8/8 6 max. 20 mm Touch latch - 103 103 60 DPC 10/10 6 max. 25 mm 4 metal screws - 123 83 60 DPC 12/8 10 max. 25 mm 4 metal screws - 152 114 5 DPC 15/10 10 max. 25 mm 4 metal screws PMDP 1510 194 144 DPC 20/15 10 max. 25 mm 4 metal screws PMDP 2015 244 194 96 DPC 25/20 12 max. 32 mm 4 metal screws PMDP 2520 306 226 125 DPC 30/22 12 max. 32 mm 4 insulated screws PMDP 3022 389 310 130 DPC 40/30 12 max. 45 mm 4 insulated screws PMDP 4030 4/12
DPC Insulated junction boxes IP55 (EN 60529) Dimensions (mm) FIG. 1 DPC 65 DPC 80 DPC 8/8 88 85 2 80 2 49 98 2 51 103 1 51 85 103 36 40 50 41,5 50 41 DPN 10/10; DP 10/10T; DPC 10/10 DPN 12/8; DP 12/8T; DPC 12/8 DPN 15/10; DP 15/10T; DPC 15/10 4 103 121 113 2 1,5 58 120 1,5 58 120 141 43 81 101 110 38 150 113 103 120 40 28 43 60 42,5 45 50 8 3 58 42,5 DPN 20/15; DP 20/15T; DPC 20/15 DPN 25/20; DP 25/20T; DPC 25/20 DPN 30/22; DP 30/22T; DPC 30/22 144 6 194 214 2 94 226 248 2 125 164 2 54 194 214 152 54 54 51 102 1 8 315 340 2 130 1 395 430 330 1 60 60 244 264 202 306 382 226 60 60 54 54 60 60 152 16 DPN 40/30; DP 40/30T; DPC 40/30 62 250 62 8 DPN without cable entries and plain lid. DP...T without cable entries and transparent lid. 4/13
DPC Insulated junction boxes IP55 (EN 60529) Insulated industrial boxes Self-tapping grooves for fixing terminal strips, DIN rails or equipment. Safety lids and screws beginning with model 100 100. Central fixing point, up to the 100 100 models, eliminating the need to drill into the box. It uses a joined screwand-stud system upon which one threads directly from the inside of the box using a screwdriver. Indication of the distance between holes to facilitate installation. Sealable screws for references DPC 30/22 and DPC 40/30. Hinges included for models DPC 30/22 and DPC 40/30. 4/14
C B A D DPC Insulated junction boxes IP55 (EN 60529) Adjustable membrane glands Insulated membrane glands made of PVC with cut-out entry for cables or tubes. Ref.: ECDPC. Reference A B C D E F ECDPC 1 28 24 20.8 8.8 2.3 15.4 20 ECDPC 2 35 28 24. 8.8 2.3 15.4 25 ECDPC 3 43.6 38 33.1 8.9 3.2 18.4 32 ECDPC 4 56.5 4 45.6 24.3 3.4 18.4 45 max. tube E F Wall-fixing rawlplugs c For fixing to one central point, possible up to models DPC65-DPC80- DPC8/8. c Suitable for any kind of wall: c Brick. c Concrete. c Drywall. c Chipboard walls, due to the expandable rawlplugs. c Colour RAL-035. c Drill hole diameter: 8 mm. c Thread diameter: 1.5 mm. Ref.: TAD. 4/15
IBS-IBP insulated industrial boxes, strong and easy to install Made of two types of insulated materials, selfextinguishing and halogen-free: c IBS (ABS boxes) for the most common uses. c IBP (Polycarbonate boxes) for high-performance uses: impact, temperature and UV resistant. Elegant and strong design. Its colour (RAL 035) enables it to easily blend into any environment. Sealing gasket that ensures the IP66. Practical cardboard packaging, reusable once the box has been fitted. Fixing grooves in the base and cover of the same diameter for fixing all accessories with just one type of screw, TOR/IB. The coupling kit enables two or more boxes to be connected, maintaining the IP and allowing cables to pass through. 4/16
3 wall-fixing methods: c Through the 4 corner chimneys in the box corners outside the watertight area. c With wall-fixing brackets. c Directly through the base openings. IBS (ABS) and IBP (polycarbonate) boxes are designed to be used in highly demanding environments requiring protection against liquids or dust, for electrical components, etc.: c Watertightness: IP66 for all boxes. c Impact resistance: c IK0 for ABS boxes. c IK08 for polycarbonate boxes. c Incandescent wire resistance: c ABS: 650 C. c PC: 50 C. c PC (UL): 960 C. In addition to our standard solutions, it is possible to customise boxes to your specific requirements: c Harmonising with the design and ergonomics of your equipment. c Reducing production times. c Easily and directly integrating into your industrial process. Customisation options exist for: c Accessory mounting. c Drilling. c Colours. c Marking. c Packaging. 4/1
IBS-IBP Insulated industrial boxes IBS, IBP IBS... IBP... Constructive features: c Insulated boxes consisting of a base and a cover. c Sealing gasket between base and cover that ensures the IP66. c 4 lid-locking screws that are easily inserted with a flat screwdriver. c Beginning with the size 125 80 mm, the standard lid-locking screws can be replaced with other double bar, square or triangular types of lock. c 3 wall-fixing methods: through the 4 chimneys in the box corners, using wall-fixing brackets or directly through the openings in the base. c Fixing grooves in base and cover for fixing accessories using self-tapping screws with a diameter of 4 mm Ref.: TOR/IB (not supplied). c Regulation of accessories in depth using EX and EXA lifting brackets. c Hinges adaptable to all boxes with 20 and 40 mm deth covers. Technical specifications: c IP66 conforming to EN 60529. c NEMA 4 & 4X according to NEMA 250. 4/18
IBS-IBP Insulated industrial boxes c Double insulation (class II) conforming to IEC 60536. c Colour: - body: grey RAL-035, - lid: grey RAL-035 or transparent lid. c Halogen-free, self-extinguishing and insulating plastic materials. c Resistance to chemical and atmospheric agents. c Conforming to standard EN 62208. IBS boxes External dimensions (mm) Reference Height Width Depth Height cover Opaque cover Transp. cover 4 4 54 10 IBS /5-89 89 54 10 IBS 88/5-116 4 62 10 IBS 11/6-116 4 94 43 IBS 11/9-116 116 62 10 IBS 1111/6-116 116 133 80 IBS 1111/13-138 93 2 20 IBS 139/ IBS 139/T 164 121 8 20 IBS 1612/8 IBS 1612/8T 192 121 8 20 IBS 1912/8 IBS 1912/8T 192 121 105 20 IBS 1912/10B IBS 1912/10BT 192 121 105 40 IBS 1912/10 IBS 1912/10T 193 164 8 20 IBS 1916/8 IBS 1916/8T 193 164 105 40 IBS 1916/10 IBS 1916/10T 241 194 8 20 IBS 2419/8 IBS 2419/8T 241 194 105 40 IBS 2419/10 IBS 2419/10T 241 194 12 60 IBS 2419/12 IBS 2419/12T 291 241 88 20 IBS 2924/8 IBS 2924/8T 291 241 128 20 IBS 2924/12 IBS 2924/12T 291 241 128 60 IBS 2924/12A IBS 2924/12AT 291 241 168 60 IBS 2924/16 IBS 2924/16T 341 291 128 20 IBS 3429/12 IBS 3429/12T 341 291 168 60 IBS 3429/16 IBS 3429/16T c Material: ABS. c IK0 (2J) conforming to EN 50102. c Incandescent wire resistance: 650 C according to CEI 60695-2-1. c Operating temperature: 25 to +60 C. c Installation temperature: 15 to +40 C. IBP boxes External dimensions (mm) PC Reference PC (UL) Reference Height Width Depth Height cover Opaque cover Transp. cover Opaque cover Transp. cover 4 4 54 10 IBP /5 - IBP /5UL - 89 89 54 10 IBP 88/5 - IBP 88/5UL - 116 4 62 10 IBP 11/6 - IBP 11/6UL - 116 116 62 10 IBP 1111/6 - IBP 1111/6UL - 138 93 2 20 IBP 139/ IBP 139/T IBP 139/UL IBP 139/TUL 164 121 8 20 IBP 1612/8 IBP 1612/8T IBP 1612/8UL IBP 1612/8TUL 192 121 8 20 IBP 1912/8 IBP 1912/8T IBP 1912/8UL IBP 1912/8TUL 192 121 105 20 IBP 1912/10B IBP 1912/10BT IBP 1912/10BUL IBP 1912/10BTUL 192 121 105 40 IBP 1912/10 IBP 1912/10T IBP 1912/10UL IBP 1912/10TUL 193 164 8 20 IBP 1916/8 IBP 1916/8T IBP 1916/8UL IBP 1916/8TUL 193 164 105 40 IBP 1916/10 IBP 1916/10T IBP 1916/10UL IBP 1916/10TUL 241 194 8 20 IBP 2419/8 IBP 2419/8T IBP 2419/8UL IBP 2419/8TUL 241 194 105 40 IBP 2419/10 IBP 2419/10T IBP 2419/10UL IBP 2419/10TUL 241 194 12 60 IBP 2419/12 IBP 2419/12T IBP 2419/12UL IBP 2419/12TUL 291 241 88 20 IBP 2924/8 IBP 2924/8T IBP 2924/8UL IBP 2924/8TUL 291 241 128 20 IBP 2924/12 IBP 2924/12T IBP 2924/12UL IBP 2924/12TUL 291 241 128 60 IBP 2924/12A IBP 2924/12AT IBP 2924/12AUL IBP 2924/12ATUL 291 241 168 60 IBP 2924/16 IBP 2924/16T IBP 2924/16UL IBP 2924/16TUL 341 291 128 20 IBP 3429/12 IBP 3429/12T IBP 3429/12UL IBP 3429/12TUL 341 291 168 60 IBP 3429/16 IBP 3429/16T IBP 3429/16UL IBP 3429/16TUL c Material: polycarbonate. c IK08 (5J) conforming to EN 50102. c Incandescent wire resistance: 50 C. c Operating temperature: 25 to +80 C. c Installation temperature: 15 to +60 C. 4/19
IBS-IBP Insulated industrial boxes IBS boxes for pushbutton installation c Insulated boxes with 22.5 mm drill holes for installing pushbuttons (not supplied). c IP54, NEMA 13 (equipped boxes). c IK0. c Colour: light grey RAL-035 and yellow RAL-1021 emergency stop. c Bases with concentric knock-outs for 20 mm ISO-metric cable entries. External dimensions (mm) Boxes with pushbuttons Height Width Depth Reference No. perforations 16/20 mm knock-outs 4 4 54 IBS /5H1 1 4 IBS /5H1PE* 1 4 116 4 62 IBS 11/6H2 2 6 * Yellow emergency stop. IBS 11/6H3 3 6 IBS boxes with pushbuttons c Insulated boxes with built-in pushbuttons. c Start/stop function with two pushbuttons. c Raise/lower/stop function with three pushbuttons. c Technical specifications of the contacts: c Positive opening NC contact conforming to IEC-EN 6094-5-1 appendix K. c Mechanical durability of the emergency stop contacts: 0.1 million switching cycles. c Mechanical durability of NC and NO contacts: 5 million cycles. c Short-circuit protection: 10 A. External dimensions (mm) Boxes with pushbuttons Height Width Depth Reference No. pushbuttons 16/20 mm knock-outs 4 4 54 IBS /5P1PE* 1 (emergency stop) 4 116 4 62 IBS 11/6P2 2 (start, stop) 6 116 4 62 IBS 11/6P3 3 (raise, lower, stop) 6 *Yellow emergency stop. Contact type Function NO NC Emergency stop 1 1 Start/stop 1 1 Start 1 - Stop - 1 Raise/lower/stop Raise 1 - Lower 1 - Stop - 1 4/20
IBS-IBP Insulated industrial boxes IBP boxes with cable entries c Insulated plastic boxes in polycarbonate consisting of base and cover with knock-outs for installing cable entries. c IP66, NEMA 4 & 4X. c IK08. c Colour: light grey RAL-035. Mounting kit for cable entries: c For cable entries with dimensions according to SEN 280901, FL13 (134 33 mm) and FL21 (261 88 mm). c Supply includes sealing gasket and screws (entry plates not supplied). External dimensions (mm) Boxes with cable entries Height Width Depth Opaque cover Transp. cover Cable entry 241 194 8 IBP 2419/8ST IBP 2419/8TST 4 FL13 291 241 88 IBP 2924/12ST IBP 2924/12TST 2 FL13+2 FL21 341 291 128 IBP 3429/12ST IBP 3429/12TST 4 FL21 Mounting kit for cable entries Reference JFL13 JFL21 SEN model FL13 FL21 Mounting plates c Made of galvanised steel (thickness of 15/10 mm) or insulated material (thickness of 25/10 mm). c They are fixed directly to the base or cover with TOR/IB self-tapping screws (not provided). For boxes with dimensions (mm) Dimensions (mm) Reference Metal Insulating Height Width Depth A B Metal Insulated 193 164 8 168.5 140 PMIB 1916 PMAIB 1916 241 194 8 215 168.5 PMIB 2419 PMAIB 2419 241 194 12 215 168.5 PMIB 2419 PMAIB 2419 291 241 88 265 215 PMIB 2924 PMAIB 2924 341 291 128 315 265 PMIB 3429 PMAIB 3429 4/21
IBS-IBP Insulated industrial boxes DIN rails c Fixed directly to the base or cover with 4 mm TOR/IB self-tapping screws, which are not provided (except in 15 5 mm). c Aluminium HPUL rail for telecommunication uses. Support included. Rails Box 10,5 1 5,5 Box with rail 15 5 mm 15 2,5 1 35 2 Box with two 35.5 mm rails 15 1 35 32 1,5 9 5,5 10,5 16 External dimensions 15 5 mm 35.5 mm 35 15 mm Asymmetrical HPUL Telecom. (mm) 116 COIB 15/116 COIB 35/116 164 COIB 15/164 COIB 35/164 192 COIB 15/192 COIB 35/192 241 COIB 15/241 COIB 35/241 COIB 3515/241 CAIB 241 291 COIB 15/291 COIB 35/291 COIB 3515/291 CAIB 291 CTIB 291 341 COIB 15/341 COIB 35/341 COIB 3515/341 CAIB 341 CTIB 341 15 Lifting brackets Self-tapping lifting brackets: c On one end they are made of a 4 mm self-tapping screw for direct fixing to the base of the box, and at the other end of an M4 thread for direct fixing of equipment, mounting plates, etc. using an M4 screw or for coupling with a secondary lifting bracket. Secondary lifting brackets: c For mounting on the self-tapping lifting brackets. Height Self-tapping lifting brackets Secondary M4 lifting brackets 15 mm EXA 15/4 EX 15/4 20 mm EXA 20/4 EX 20/4 30 mm EXA 30/4 EX 30/4 Locking screws c Boxes are supplied with 4 easy-turn screws requiring the use of a 4 to 5.5 mm flat screwdriver. c From size 138 93 and up, the standard supply screw can be substituted with other types of standardised screws. c Once the standard screw has been removed, the new screw is positioned with simple pressure. Cover 20 mm 40 mm 60 mm Square 6 mm TCC6IB 20 TCC6IB 40 TCC6IB 60 mm TCCIB 20 TCCIB 40 TCCIB 60 8 mm TCC8IB 20 TCC8IB 40 TCC8IB 60 Triangle 6.5 mm TCT6IB 20 TCT6IB 40 TCT6IB 60 8 mm TCT8IB 20 TCT8IB 40 TCT8IB 60 Double bar 3 mm TCDB3IB 20 TCDB3IB 40 TCDB3IB 60 5 mm TCDB5IB 20 TCDB5IB 40 TCDB5IB 60 Standard screw (screwdriver) TCDIB 20 TCDIB 40 TCDIB 60 4/22
IBS-IBP Insulated industrial boxes Fixing brackets c Adaptable to all boxes from size 116 116 mm and up. c They can be used vertically or horizontally. c Sets of 4 fixing brackets and screws. Ref.: PFIB. Hinges c Adaptable to all covers of 20 mm and 40 mm from size 138 93 mm and up. c Set of two hinges with fixing screws. c Maximum load of cover with hinges: 10 kg/m 2. c Hinges allow the cover to fully open. Cover 20 mm 40 mm Hinges BIB 20 BIB 40 Handle c They are directly fixed onto standard screws. c Allows the box to be opened without the need for a screwdriver. Ref.: MIB. 4/23
IBS-IBP Insulated industrial boxes Terminal blocks and supports c Terminals can be easily fixed to the supports with clips. c Boxes from size 192 121 mm and up accept 12 2 mm strip support bars. c The individual TTIB earthing terminal is fixed to boxes smaller than 116 116 mm. Max. connection capacity: 2 2.5 mm 2. Internal body dimensions length depth Reference 192 60 mm SBIB4 241 80 mm SBIB6 291 100 mm SBIB8 Terminal blocks Description No. of holes Black Blue Green 2 10 2 2 16 2 4 RBIB22TN RBIB22TA RBIB22TV 3 16 2 1 25 2 4 RBIB31TN RBIB31TA RBIB31TV Terminal blocks per support 15 mm support 225 mm support 25 mm support Terminal blocks Box 2 10 2 2 16 2 3 16 2 1 25 2 4 0 192 121 193 164 0 4 241 194 6 0 241 194 0 5 291 241 3 3 8 0 291 241 0 6 3 4 341 291 4 3 Coupling kit c Makes the coupling of two or more boxes possible without reducing the IP. c A perforation with a diameter of 32 mm must be made in the boxes to be coupled for their installation. To increase cable passage capacity, a second kit can be added by drilling an additional 32 mm hole. c 2 kits are provided. Ref.: UM/DHS. 4/24
IBS-IBP Insulated industrial boxes Cable entries c IP55. c RAL-035. c Material: SB5. Reference Cable/tube (mm) Perforation (mm) ECIB D20 4-20 23 ECIB D25 4-25 29 ECIB D32 4-32 36 ECIB D40 4-40 44 ISO cable entries c IP6. c According to standard EN 50262. c Material: EPDM. c Adapted to boxes with a thickness of 1 to 4 mm (0.5 to 2 mm for Ref: ECIB-M12). c Fast installation without the need for tools. Reference ISO Cable (mm) Perforation (mm) ECIB M12 M12 3-5 12.5 ECIB M16 M16 5-16.0 ECIB M20 M20-10 20.3 ECIB M25 M25 10-14 25.3 ECIB M32 M32 14-20 32.4 ECIB M40 M40 20-26 40. ECIB M50 M50 26-35 50. 4/25
IBS-IBP Insulated industrial boxes Cable gland c IP68, 5 bar. c Conforming to standard EN 50262. c Grey RAL-035. c Material: PA6, neoprene gasket. c Operating temperature: 30...+80 C up to +150 C for short periods. c Cable glands are supplied with nuts. Cable glands c Using a multi-cable gasket, it is possible to pass various cables through one single cable gland. Multicable gasket Transport plug (for temporary protection of box contents). 1-cable cable gland Multi-cable gasket Transport plug Gasket reference Plug reference reference Reference min./max. (mm) Reference No. / (mm) M12 PE M12 3/6.5 - - JPE M12 TPE M12 - M16 PE M16 4/8 JM24 M16 2 4 JPE M16 TPE M16 TTPE M16 M20 PE M20 6/12 JM34 M20 3 4 JPE M20 TPE M20 TTPE M20 M25 PE M25 11/1 JM45 M25 4 5 JPE M25 TPE M25 TTPE M25 M32 PE M32 15/21 JM65 M32 6 5 JPE M32 TPE M32 TTPE M32 M40 PE M40 19/28 - - JPE M40 TPE M40 TTPE M40 Ventilation entries c Allows the boxes to be ventilated without reducing the IP. c IP68, 1 bar (0.1 bars for high airflow version). c Material: PA6 V2, copolymer acrylic membrane, water- and oil-resistant. c Operating temperature: 40...+105 C. c dp permeability = 0 mbar: c Ref. VM12 = 0.016 m 3 /h (standard). c Ref. VM12AC = 0.12 m 3 /h (high flow). Reference (mm) Flow (m 3 /h) VM12 M12 0.0160 VM12AC M12 0.1200 4/26
IBS-IBP Insulated industrial boxes Dimensions (mm) FIG. 1 65 65 4 mm box interior side back 65 5,4 34 Ø16 30 2 30 41 49,5 3,5 2 4,2 53,5 Ø16 80 80 45 mm box interior side back 56 5,4 Ø 16 19 56 19 64,5 80 88,5 2 4,2 53,5 105 65 55 mm box interior side back 44 5,4 19 19 115,5 10 91,5 50 80 19 49,5 65 3,5 2 55,2 61,5 19 105 105 55 mm box interior side back cover 84 5,4 2 50 8 54 109 115 2 55,5 62 8 125 80 65 mm box interior side back cover 4,2 1 2,5 2,5 62 22 138 12 8 50 8 116 104 4 106 64 5,4 42 82 93 2,1 65 2 9 29 59 4/2
IBS-IBP Insulated industrial boxes FIG. 2 150 105 80 mm box 98 8 84 5 22,5 22,5 90 50 4,2 5,4 141 130 95 50 113 153 164 130 100 131 89 0 110 121 2,1 80 8 9 16 105 80 or 100 mm box 4,2 98 8 65 height 80 mm (60 + 20) height 100 mm (60 + 40) 98 22,5 5 22,5 90 50 5,4 158,5 136 136 130 100 158 128 160 118 0 110 121 2,1 80 8 9 2,1 100 10 9 16 160 80 or 100 mm box 141 130 100 height 80 mm (60 + 20) height 100 mm (60 + 40) 158,5 136 136 130 100 2,1 113 9 2,1 80 9 153 8 100 164 10 130 100 131 89 158 128 160 118 4/28
IBS-IBP Insulated industrial boxes FIG. 3 220 15 80, 100 or 120 mm box 11 159 138 130 100 height 80 mm (60 + 20) height 100 mm (60 + 40) height 120 mm (80 + 40) 143 183 194 160 130 163 123 45 20 1 208 1 45 185 150 125 120 189 230 241 2,1 2,1 2,1 9 9 9 80 100 120 8 10 128 Box without entries, smooth sides 25 225 80, 120 or 160 mm 185 height 80 mm height 120 mm 125 120 (60 + 20) (60 + 60) height 160 mm (100 + 60) 2,1 80 8 9 2,1 120 128 9 2,1 160 168 9 209 16 25 22 258 220 255 235 200 125 189 230 241 20 1 4/29
IBS-IBP Insulated industrial boxes FIG. 4 220 25 120 or 100 mm box 255 235 210 200 125 height 120 mm (100 + 20) 8 54 29 height 160 mm (100 + 60) 2.1 160 168 9 25 22 259 21 30 2 90 90 308 20 305 285 250 200 125 240 281 291 2.1 120 128 9 Coupling kit M32 4/30