Incorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles

Transcription

1 Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles

2 Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional Capable of handling huge air volumes, egg crate grilles are perfect as intakes into air handling units, and for areas where high changeover rates are needed, paint booths, restaurant kitchens etc. Free area: Mass/M sq face area: Mass/M sq face area inc OBD: 90% 7.5 kg 15.5 kg Egg crate grille, 37mm bevelled flange, RAL 9010 finish Specifications: Exceptional air volumes Volume control Materials: Construction: Extruded aluminium throughout. Plastic core optional. Aluminium core. Frame held together using punched in steel corners. A 90% free area makes egg crate grilles the most efficient extract terminal available from HVC. This also means large pressure drops and noise levels are avoided, where other grilles may begin to have a detrimental effect on performance. Optional rear mounted volume control dampers enable easy adjutment of airflow. The 12.7mm square hole size also enables adjustment to be done from entirely outside the grille, with a screwdriver or key. Core held in by frame design. Frame: Standard - 37mm bevelled. Optional - See page 6. Core only. Fixings: Standard - None. Optional - See page 5. Sizes: Minimum size single unit 100mm x 50mm. Maximum size single unit 2900mm x 2900mm. Mullions: Central mullion on any unit above 1200mm in any dimension. Finish: Standard - Satin anodised (AA5) frame, Mill aluminium finish core. Optional - Polyester powder coat 2 for live UK stock levels

3 Series ECG A B C D 30mm flat flange (Opt) Nominal + 30mm 28mm 72mm 30mm A B C D 37mm bevelled flange (Std) Nominal + 45mm 28mm 70mm 37mm 600 x 600 ECG D FH SAA SIZE (Nominal / overall w x h [mm]) SERIES DAMPER Opposed blade... D FRAME TYPE - See page 40 32mm bevelled... 25mm flat...25f Others page 40...[#] FINISH Satin anodised... SAA Powder coat...ral/bs FIXINGS - See page 39 Countersunk face... FH Concealed fixings... CF Goalpost brackets... GB Push in clips... PC Burgess tile... BT CORE TYPE - See page 38 Fixed... Hinged... HC Fully removable... RC 3

4 Grilles Egg crate 45 Recommended for: Wall, ceiling & duct Extract & supply Overview High capacity extract or supply grille 45 core blocks sight and directs throw A new innovation on the reliable Egg Crate Grille, Series ECG45 grilles use a 45 degree core to bring the same air handling performance as standard Egg Crate Grilles, but add the desirable features of blocking sight from most angles, and giving directional throw capability when used for supply. Free area: Mass/M sq face area: Mass/M sq face area inc OBD: 90% 7.5 kg 15.5 kg Egg crate grille 45, 37mm bevelled flange, RAL 9010 finish Specifications: Exceptional air volumes Volume control Materials: Construction: Extruded aluminium throughout. Aluminium core. Frame held together using punched in steel corners. Core held in by frame design. A 90% free area makes egg crate grilles the most efficient extract terminal available from HVC. This also means large pressure drops and noise levels are avoided, where other grilles may begin to have a detrimental effect on performance. Optional rear mounted volume control dampers enable easy adjutment of airflow. The 12.7mm square hole size also enables adjustment to be done from entirely outside the grille, with a screwdriver or key. Frame: Standard - 37mm bevelled. Optional - See page 6. Core only. Fixings: Standard - None. Optional - See page 5. Sizes: Minimum size single unit 100mm x 50mm. Maximum size single unit 2900mm x 2900mm. Mullions: Central mullion on any unit above 1200mm in any dimension. Finish: Standard - Satin anodised (AA5) frame, Mill aluminium finish core. Optional - Polyester powder coat to any RAL / BS colour. 4 for live UK stock levels

5 Series ECG45 A B C D 30mm flat flange (Opt) Nominal + 30mm 28mm 72mm 30mm A B C D 37mm bevelled flange (Std) Nominal + 45mm 28mm 70mm 37mm 600 x 600 ECG45 D FH SAA SIZE (Nominal / overall w x h [mm]) SERIES DAMPER Opposed blade... D FRAME TYPE 37mm bevelled... 30mm flat...25f Others page [#] FINISH Satin anodised... SAA Powder coat...ral/bs FIXINGS Countersunk face... FH Concealed fixings... CF Goalpost brackets... GB Push in clips... PC Burgess tile... BT CORE TYPE Fixed... Hinged... HC Fully removable... RC 5

6 Grilles Hinged & removable cores Removable cores Enabling the whole core section to be removed allows unsurpassed access to dampers and duct internals, without having to remove the main frame, avoiding unnecessary damage to walls or ceilings. Quarter turn fasteners are the standard removable core fitting. Using a discrete clip on the main frame, and a zinc plated pin held securely by a neoprene washer in the core frame, the fasteners are completey secure when in position, but allow quick and easy core removal when needed. The bracket s slim design means grille depths are unchanged from standard, non removable core models. Wing head pins are available as an alternative to slotted head pints to allow removal by hand if required. Pins and brackets are supplied unpainted. Hinged core As with removable cores, hinged cores use a main and core frame. Zinc plated piano hinge is fitted to the full length of the hinged side, and countersunk cross headed bolts secure the core in it s closed position. Chromed cam fasteners are optional. Grille series Core type SD DD FB ECG NV CB LG LGFR CFLG RGS PSG LFP PPG LCD Hinged core x N/A N/A N/A Removable core x 6 for live UK stock levels

7 Grilles Fitting options Countersunk fixing holes: Code suffix FH Countersunk fixing holes in the grille frame are the easiest fitting method. Screws in the same finish are supplied with the grille. Concealed fixings: Code suffix CF Consisting of L brackets with threaded ports, one L bracket is fixed into the ductwork or plenum, the other is riveted to the rear of the grille frame. Supplied bolts are then used to hold the grille into the supporting structure. Push-in clip method: Code suffix PC These sprung clips are compressed when the grille is pushed into place. The outward force provided then holds the grille securely in place. This method has the advantage of requiring no drilling or bolting, for maximum ease and causing no damage to walls. This fixing method is not suitable for use in ceilings. Goalpost method: Code suffix GB Normally used on linear slot diffusers, HVC has made this effective fixing method available to a wider range of grilles with the addition of a second bracket. It enables the whole grille to be fully supported by, and removable from the plenum. This method is only suitable for linear grilles with 0 blade, single / double deflection grilles, egg crate grilles, curved blade grilles, and any other grille with the removable or hinged core option specified. 7

8 Grilles Frame types Grille series Frame types SD DD FB ECG NV CB LG LGFR CFLG SDG PSG LFP PPG LCD 1 25mm large flat x x x x STD 2 30mm flat 1 way x x x x 3 NV angle x NV1-3 x 4 32mm small bevelled STD x STD x x STD x x x x 5 32mm large bevelled STD x x STD x x 6 37mm ECG x x x STD x x x x N/A N/A N/A STD x 7 30mm ECG x x x x x x x x 8 Slimline surface mounted x x x NV4 x x x x x 9 Large surface mounted x x x 10 36mm bevelled LG x x x x x x STD x x x x 11 31mm flat LG x x x x x x x x x x 8 for live UK stock levels

9 Selection data ECG Volume (l/s) Sound pressure leve (NC) Jet velocity (m/s) Static pressure (Pa) Grille width (mm) Grille height (mm)

10 Ancillaries Plenum boxes Overview Designed to facilitate the fitment of ducting to a grille or diffuser. HVC plenum boxes are available in top or side entry models with one or multiple spigots of any diameter. Fire rated models & acoustically lined variants are also available. Specifications: Materials: Construction: Galvanised steel throughout Brake press formed. Fixings: Flange: Finish: Spot welding on spigots. Sealant used on any joints. Standard - Plenum riveted (or other suitable method) to grille or diffuser on site. Optional - Fixing lugs to suit drop rod ceiling. 12.5mm outturned flange used on everything except type CD and PPD diffusers. Standard - Galvanised steel. Optional - Painted to any RAL / BS colour. Top entry plenum box, uninsulated, with 12.5mm out-turns Top entry: Series TEPB The chart below gives maximum volume in m 3 /s that shown spigot sizes can handle for a given noise level, with neck velocities in m/s. Spigot selection NC Level Diameter 2.5m/s 3.0m/s 3.5m/s 4.0m/s 4.5m/s Side entry: Series SEPB 10 for live UK stock levels

11 Series TEPB / SEPB / FRTEPB / FRSEPB Fire rated: Series FRTEPB / FRSEPB Constructed from fully welded 1.22mm thick galvanised steel, and with an integrated S200 fire damper rated for a period of six hours, or an intumescent damper rated at one hour. The spring loaded damper blades of S200 fire dampers also mean that top entry boxes can be made fire rated, aswell as side entry. HVC always recommend consulting the relevant fire authority when installing fire rated HVAC equipment. Side entry: Series FRSEPB Top entry: Series FRTEPB 600 x 600 SEPB 2C 200 F SBD IN-RAL9005 SIZE (Nominal / overall w x h [mm]) SERIES SPIGOT ARRANGEMENT State number reqd n... n Double spigot opposite... 2OP Double spigot corner... 2C SPIGOT SIZE Ø 000 x W x H FURTHER OPTIONS Painted interior... IN-RAL Painted exterior... EX-RAL Insulated interior... IN-INS Insulated exterior... EX-INS SPIGOT DAMPER Single blade damper fitted to all spigots... SBD FLANGE 12.5mm all round If different required state size BOX DEPTH Not needed if Series = SEPB 11

12 Grilles & diffusers Louvres Supplies Ltd Fire / Fire smoke dampers Volume control dampers All details within this brochure are correct at time of going to print. However HVC s policy is one of continual product development. The right is reserved to alter any details published in this brochure without any prior notice. Any changes will appear on as soon as is practically possible. All information in this brochure is designed to be used for informative purposes only. HVC will not be legally bound by anything contained within this publication, or any other information distributed. All references to companies not part of the HVC group of companies are used with the permission of their respective owners.