CONTROL DESK SOLUTIONS
|
|
|
- Avice Warner
- 9 years ago
- Views:
Transcription
1 DESKS CONTROL DESK SOLUTIONS Three types of solutions: - enclosures with control desk based on Areta system, with door, panel or front shelf - modular desks with and 500 mm depth - monobloc desks. 157 CONTROL DESKS SOLUTIONS
2 ARETA AL DESK CAINETS MAIN ACCESSORIES ATPA front inserted mounting plate (see page 162) ATFI side panels (see page 44) modular plinth (see page 163) eyebolts (see page 46) ARETA AL The control desk series AL is based on the same vertical modularity concept successfully tested with the PC enclosure: the basic enclosure with Areta structure is completed with a front frame that can be fitted with a closing panel or a shelf. Available in 4 widths, 2 depths and one height within 1mm, the range of control desks can be completed with Areta accessories, to enrich a unique product in its category. / - ARETA structure with rear door or panel (assembled or in kit) - ATAL front frame complete with upper and lower door (see specifications on page 160) The front structure must be completed with shelf ATME AL or front panel ATPN AL. - structure: colour RAL 7035 smooth finish - roof and bottom: colour RAL 7025 textured finish - AL front, rear door or panel: colour RAL 7035 textured finish. IP ARETA AL DESK CAINETS
3 DESKS 159 ARETA AL DESK CAINETS
4 ASSEMLED ARETA AL CAINET - Areta structure already assembled with rear door or rear panel - ATAL structure (to be ordered separately the shelf or the front panel and the mounting plate check on page ) AL CAINET H=1 WITH REAR DOOR ATAL ATAL061404FP ATAL081404FP WIDTH CAINET DIMENSIONS DEPTH ATAL121404FP ATAL161404FP 1 ATAL061405FP 500 ATAL081405FP 500 ATAL121405FP 500 ATAL161405FP AL CAINET H=1 WITH REAR PANEL ATAL ATAL061404FR ATAL081404FR WIDTH CAINET DIMENSIONS DEPTH ATAL121404FR ATAL161404FR 1 ATAL061405FR 500 ATAL081405FR 500 ATAL121405FR 500 ATAL161405FR FLAT-PACK ARETA AL CAINET - Areta structure supplied flat-pack with rear door or rear panel - ATAL structure (to be ordered separately the shelf or the front panel and the mounting plate check on page ) ATAL FRONT FRAME / Frame manufactured from 20/10 sheet steel. Roof extension manufactured from 20/10 sheet steel. Upper door manufactured from 15/10 sheet with sendzimir profiles and mechanical stop avoiding accidental closing, and Ø 3mm double bar locking system. Lower door manufactured from 15/10 sheet steel with stiffening profile and Ø 3mm double bar latch closing system. - adhesive gasket and mounting accessories - a pair of structural uprights. FLAT-PACK ARETA AL CAINET DIMENSIONS WIDTH HEIGHT DEPTH TOP + OTTOM ATTF040 ATTF050 AL FRONT STRUCTURE* + STRUCT. UPRIGHT ATAL ATAL REAR DOOR* + STRUCT. UPRIGHT ATPO ATPO ATTF040 ATAL ATPO ATTF050 ATAL ATPO ATTF40 ATAL ATPO ATTF50 ATAL ATPO ATTF140 ATAL ATPO ATTF150 ATAL ATPO REAR PANEL* + STRUCT. UPRIGHT ATRE ATRE ATRE ATRE ATRE ATRE ATRE ATRE (*) AL front structure, rear door, rear panel are supplied together with a pair of uprights. 160 ARETA AL DESK CAINETS
5 DESKS ARETA AL COMPLEMENTARY ACCESSORIES SHELF ATME Structure manufactured from 15/10 sheet steel. Upper panel manufactured from 15/10 sheet steel with sendzimir rails and gas springs avoiding accidental closing. Colour: RAL 7035 textured finish. Supply includes: - one shelf - upper panel complete with Ø 3mm double bar locking system - sealing gasket - mounting accessories. ATME ATME000AL ATME000AL ATME00AL ATME001AL SHELF CAINET WIDTH 1 PANEL ATPN Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. Supply includes nr. 1 piece with mounting accessories. PANEL ATPN ATPN000AL ATPN000AL ATPN00AL ATPN001AL CAINET WIDTH ARETA AL COMPLEMENTARY ACCESSORIES
6 MOUNTING PLATE H= ATPR Manufactured from 25/10 sendzimir sheet steel. To be ordered separately: - lateral rails (see below) and mounting accessories (see page 54). MOUNTING PLATE H= ATPR ATPR-080 ATPR-080 ATPR-80 ATPR-180 CAINET WIDTH 1 For the correct use and handling of the mounting plates, it is suggested to wear proper gloves (complying with the art of the decree 626/94). RAILS WTPR Supply includes: nr. 2 pieces. To be ordered separately: - mounting accessories WTSF - 001CP. RAILS WTPR WTPR CP WTPR CP WTPR CP WTPR CP CAINET DEPTH 500 MOUNTING PLATE H=1300 ATPA Manufactured from 25/10 sendzimir sheet steel. To be ordered separately: - mounting accessories (see page 36). For L > 1 Mounting plate manufactured with two parts with horizontal union and stiffening omega. For the correct use and handling of the mounting plates, it is suggested to wear proper gloves (complying with the art of the decree 626/94). MOUNTING PLATE H=1300 ATPA CAINET WIDTH ATPA ATPA ATPA ATPA ARETA AL COMPLEMENTARY ACCESSORIES
7 DESKS MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces. UNIVERSAL CORNER PIECES SIDE CROSSPIECES FOR DESK CAINET CROSS. LENGTH (mm) -A100 -A200 CORNER PIECES FOR PLINTH H=100 CORNER PIECES FOR PLINTH H=200 -T0T -T0500T SIDE CROSS. FOR PLINTH D= 369 SIDE CROSS. FOR PLINTH D= Supply includes 4 pieces with mounting accessories. Supply includes 2 pieces. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0TD. UNIVERSAL FRONT CROSSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page T0 FRONT CROSS. FOR PLINTH W= 444 -T0 FRONT CROSS. FOR PLINTH W= 644 -T FRONT CROSS. FOR PLINTH W= T1 FRONT CROSS. FOR PLINTH W= Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 163 ARETA AL COMPLEMENTARY ACCESSORIES
8 MODULAR CONTROL DESKS MM DEPTH W=/ W=/1 OX AE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Door manufactured from 15/10 sheet steel with lateral stiffening cover. - box - door complete with Ø 3mm double bar closing system - mounting plate - adjustable cable entry. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A; UL50. internal mounting plate space space space OX AE AE AE601 AE802 AE123 AE164 DIMENSIONS FIXING FLOOR CALE ENTRY DOOR SPACE INNER PLATE A P C D E F M L H I (MAX) (x2) (x2) MODULAR CONTROL DESKS
9 DESKS SHELF LE Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - rails to mount supplementary mounting plate - sealing gasket - mounting accessories. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. LE SHELF LE NR. OF LOCKS LE601 LE802 LE123 LE UPPER PART PE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel with zincpassivated 20/10 rails for mounting plate adjustment. Overturning front panel manufactured from 20/10 sheet steel complete with sendzimir vertical rails and mechanical stop. - upper part - overturning front cover with Ø 3mm double bar closing system - mounting plate - sealing gasket - mounting accessories. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. UPPER PART PE innner plate PE PE601 PE802 PE123 PE164 MOUNTING PLATE DIM. L H I (MAX) MODULAR CONTROL DESKS
10 SHELF ME Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - sealing gasket - mounting accessories. Enclosure, door and panel: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50 ME SHELF ME NR. OF LOCKS ME601 ME802 ME123 ME Typical composition: AE box + LE shelf + PE upper part 166 MODULAR CONTROL DESKS
11 500MM DEPTH DESKS OX AE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Front and rear doors manufactured from 15/10 sheet steel with lateral stiffening cover. - box - doors complete with Ø 3mm double bar closing system - mounting plate - adjustable cable entry. W= W=/1 ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A; UL50. internal mounting plate space space space OX AE AE AE8025 AE1235 AE1645 DIMENSIONS FLOOR FIXING CALE ENTRY DOOR SPACE INNER PLATE A P C D E F M L H I (MAX) (X2) (X2) MODULAR CONTROL DESKS
12 SHELF LE Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - rails to mount supplementary mounting plate - sealing gasket - mounting accessories. ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. LE SHELF LE NR. CLOSING SYSTEM LE8025 LE1235 LE front panel rear panel UPPER PART PE Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel with 20/10 zincpassivated rails for mounting plate adjustment. Overturning front and rear panel manufactured from 20/10 sheet steel complete with sendzimir vertical rails and mechanical stop. - upper part - overturning front cover with Ø 3mm double bar closing system - mounting plate - sealing gasket - mounting accessories. ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55. inner plate UPPER PART PE PE PE8025 PE1235 PE1645 PLATE DIMENSIONS L H I (MAX) MODULAR CONTROL DESKS
13 DESKS SHELF ME Structure manufactured from 15/10 press bent sheet steel. Upper panel manufactured from 20/10 sheet steel with sendzimir rails and gas springs to support lid and avoiding accidental closing. - shelf - lid complete with Ø 3mm double bar closing system - sealing gasket - mounting accessories. ox and doors: colour RAL 7035 textured finish. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50. ME SHELF ME NR. OF LOCKS ME8025 ME1235 ME Typical composition: AE box + LE shelf + PE upper part 169 MODULAR CONTROL DESKS
14 MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish. The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces UNIVERSAL CORNER PIECES SIDE CROSSP. FOR MODULAR CONTROL DESKS CROSS. LENGTH (mm) -A100 -A200 CORNER PIECES FOR PLINTH H=100 CORNER PIECES FOR PLINTH H=200 -T0A -T0500 SIDE CROSS. PLINTH D= 236 SIDE CROSS. PLINTH D= Supply includes 4 pieces with mounting accessories. Supply includes 2 pieces. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0AD. UNIVERSAL FRONT CR0SSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page T0 FRONT. CROSS. FOR PLINTH W= 444 -T0 FRONT. CROSS. FOR PLINTH W= 644 -T FRONT. CROSS. FOR PLINTH W= T1 FRONT. CROSS. FOR PLINTH W= Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 170 MODULAR CONTROL DESKS
15 DESKS MONOLOC CONTROL DESKS SA W=/ W=1000/ Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel. Front and rear doors manufactured from 15/10 sheet steel with lateral stiffening cover. Upper panel manufactured from 15/10 sheet steel complete with sendzimir rails and gas springs to support lid and avoiding accidental closing. Structure, doors, upper panel: colour RAL 7035 textured finish. - control desk - doors complete with Ø 3mm double bar closing system - mounting plate - upper panel complete with closing system - adjustable cable entry. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50. internal mounting plate 171 MONOLOC CONTROL DESKS
16 CONTROL DESK SA SA SA601 SA801 SA001 SA201 DIMENSIONS FLOOR FIXING CALE ENTRY DOOR SPACE INNER PLATE A P C D E (X2) (X2) F M L H I (MAX) MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish. The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces UNIVERSAL CORNER PIECES SIDE CROSSPIECES FOR SA CONTROL DESKS CROSS. LENGTH (mm) -A100 CORNER PIECES FOR PLINTH H=100 -T0 SIDE CROSSPIECES FOR PLINTH D= 206 -A200 CORNER PIECES FOR PLINTH H=200 Supply includes 2 pieces. Supply includes 4 pieces with mounting accessories. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0D. UNIVERSAL FRONT CROSSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page T0 FRONT CROSS. FOR PLINTH W= 444 -T0 FRONT CROSS. FOR PLINTH W= 644 -T1000 FRONT CROSS. FOR PLINTH W= T FRONT CROSS. FOR PLINTH W= 1044 Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 172 MONOLOC CONTROL DESKS
17 DESKS ZA Structure manufactured from 15/10 press bent sheet steel. Mounting plate manufactured from 25/10 sendzimir sheet steel mounted on the rear cover. Upper cover manufactured from 15/10 sheet steel complete with sendzimir profiles and mechanical stop. Adjustable cable entry. Structure, doors, upper panel: colour RAL 7035 textured finish. - control desk - doors complete with Ø 3mm double bar closing system - mounting plate - upper cover complete with locking system - adjustable cable entry. CONFORMITY AND APPROVAL - IP 55 - NEMA 12 complying with UL508A, UL50. W=/ W=1000/ inner plate CONTROL DESK ZA ZA DIMENSIONS FLOOR FIXING CALE ENTRY DOOR SPACE INNER PLATE A P C D E F M L H ZA ZA ZA (X2) ZA (X2) MONOLOC CONTROL DESKS
18 MODULAR PLINTH Corner pieces manufactured from 25/10 sheet steel, with PVC front covers caps. Front and side crosspieces manufactured from 20/10 press bent sheet steel. Colour: RAL 7025 textured finish. The modular plinth is made up of: - corner pieces: supply includes 4 pieces complete with front covers and mounting hardware - front crosspieces: supply includes 2 pieces - side crosspieces: supply includes 2 pieces UNIVERSAL CORNER PIECES SIDE CROSSPIECES FOR ZA CONTROL DESKS CROSS. LENGTH (mm) -A100 CORNER PIECES FOR PLINTH H=100 -T0A SIDE CROSS. FOR PLINTH D= 236 -A100 CORNER PIECES FOR PLINTH H=200 Supply includes 2 pieces. Supply includes 4 pieces with mounting accessories. To order the side crosspieces H=200, add the suffix D to the code. I.E.: -T0AD. UNIVERSAL FRONT CROSSPIECES CROSS. LENGTH (mm) Note: for more information, assembly drawings and dimensional features, please check on page T0 FRONT CROSS. FOR PLINTH W= 444 -T0 FRONT CROSS. FOR PLINTH W= 644 -T1000 FRONT CROSS. FOR PLINTH W= T FRONT CROSS. FOR PLINTH W= 1044 Supply includes 2 pieces. To order the front crosspieces H=200, add the suffix D to the code. I.E.: -T0D. 174 MONOLOC CONTROL DESKS
19 DESKS CONTROL DESKS COMPLEMENTARY ACCESSORIES CASING FOR PE To be mounted on the 500mm deep PE instead of the rear panel when a greater depth is required. PECF equipment footprint PECF8025 PECF1235 PECF1645 CASING PE PE WIDTH 1 Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. Supply includes nr. 1 casing with closing system, sealing gasket and mounting accessories. MOUNTING PLATE FOR AE Manufactured from 25/10 sendzimir sheet steel. Supply includes nr. 1 piece complete with mounting accessories. MOUNTING PLATE FOR AE PA4-AE PA4-AE825 PA4-AE235 PA4-AE645 AE WIDTH 1 MOUNTING PLATE FOR LE Manufactured from 25/10 sendzimir sheet steel. Supply includes nr. 1 piece complete with mounting accessories. MOUNTING PLATE FOR LE PA4-LE PA4-LE015 PA4-LE025 PA4-LE235 PA4-LE645 LE WIDTH CONTROL DESKS COMPLEMENTARY ACCESSORIES
20 COVER TL FOR LE SHELF Manufactured from 15/10 sheet steel. Colour: RAL 7035 textured finish. Supply includes nr. 1 piece complete with sealing gasket and mounting accessories. TL FOR LE D= TL TL601 TL802 TL123 TL164 1 DIMENSIONS P TL FOR LE D=500 TL TL8025 TL1235 TL DIMENSIONS P HANDLE FOR CONTROL DESK Manufactured from aluminium alloy. Supply includes nr. 1 piece complete with mounting accessories. HANDLE WA WA- WA-410 WA-430 WA-440 WA-450 WIDTH SPA UPPER PART SPA SPA601 SPA801 SPA001 SPA DIMENSIONS E CONTROL DESKS COMPLEMENTARY ACCESSORIES
21 DESKS LOCKING SYSTEMS WE REF. WE251 1 LOCK WE255 2 ETA INSERT WE160 3 ETA KEY WE260 4 INSERT 6 WE263 5 KEY 6 WE265 6 INSERT 7 WE268 7 KEY 7 WE270 8 INSERT 6,5 WE273 9 KEY 6,5 WE INSERT 8 WE KEY 8 WE FIAT LOCK WE FIAT KEY LOCKING SYSTEMS WE REF. WE010 1 ROD SYSTEM WE080 2 FIAT INSERT WE210 3 FIAT KEY WE027 4 COVER FOR FIAT INSERT WE030 5 ETA INSERT Ø 3 WE160 6 ETA KEY Ø 3 WE040 7 ETA INSERT Ø 5 WE170 8 ETA KEY Ø 5 WE050 9 INSERT 7 WE KEY 7 WE INSERT 8 WE KEY 8 WE INSERT 7 WE KEY 7 WE ETA LOCK COVER 177 CONTROL DESKS COMPLEMENTARY ACCESSORIES
PC SOLUTIONS CABINETS. - Enclosures with PC front panels with innovative design - PC enclosures with sliding shelf - Workplaces for industrial PCs
PC SOLUTIONS - Enclosures with PC front panels with innovative design - PC enclosures with sliding shelf - Workplaces for industrial PCs 123 PC SOLUTIONS ARETA PC CHARACTERISTICS/ - ARETA structure with
Reduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U
Reduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U Applications The High Density Cabinets are suitable for Central Offices and can be used as fiber nodes and termination points
Knürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
Knürr DCM. Knürr DCM. 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1
Knürr DCM 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1 Knürr DCM conquers the world Standardization in the data center begins with the Knürr DCM! The Knürr DCM is the modular building block
BLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers
Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers An intelligent physical infrastructure is required
DIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
Linkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
SERVER ROOM CABINET INSTALLATION CONCEPTS
SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS ZPAS 169 EXAMPLES OF SERVER ROOMS PROJECTS WITH ZPAS CABINETS Data Box in the
PROLINE Go l d Se r i e s. Desk Consoles and Accessories
Modular Enclosure Systems Application PROLINE Gold Series desk consoles are ergonomically designed for use in either a sitting or standing position. Single-access consoles have a front door and solid back.
Knürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
IT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
Slides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
Customized Server Cabinets
GOING GREEN WITH CUSTOMIZABLE CABINETS AND RACKS Designed to provide industry leading airflow, CyrusOne s cabinets and rack solutions promote optimal cooling and contribute to reduced power consumption.
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
Data Centre Solutions
Issue 6 Data Centre Solutions RACKS POWER COOLING MONITORING SECURITY SERVICE & SUPPORT The simple route to the perfect data centre Data centres are complex systems. Software, hardware and IT infrastructure
19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
Cabinet V800 V800 CABINETS
V800 Cabinet Siemon s V800 cabinets provide a robust, cost-effective enclosure solution that provides valuable Zero-U space on each side of the equipment rails for cable management, PDU mounting or connectivity
Installation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
19" Open Rack for Network and Cabling Management
19" Open Rack for Network and Cabling Management Feartures: The CLM-221X-XXXX openrack is a solution of easier assemblying, more competitive price for our customers. All components can be seperated by
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Stainless-steel enclosures
Stainless-steel enclosures Spacial S3X Stainless-steel wall-mounting enclosures 5/8 Dimensions 5/11 Selection guide 5/12 Spacial S3EX for potentially explosive atmospheres 5/16 Spacial SMX Stainless-steel
Workspace and storage furnishings
LISTA Compact Workspace and storage furnishings Test and inspection workstations With its modular test and inspection workstations, LISTA offers optimised solutions for modern quality assurance practices.
06 / 2003. Optional components. MAXDATA PLATINUM Server-Rack PLATINUM. [Product Guide] www.maxdata.de
![06 / 2003. Optional components. MAXDATA PLATINUM Server-Rack PLATINUM. [Product Guide] www.maxdata.de](/thumbs/26/8741639.jpg "06 / 2003. Optional components. MAXDATA PLATINUM Server-Rack PLATINUM. [Product Guide] www.maxdata.de")
D Positioning Key-Features Specifications Optional components MAXDATA PLATINUM Server-Rack PLATINUM [Product Guide] www.maxdata.de Positioning Description Server-Racks with 41U, 37U and 23U Highlights
Aluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
K17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
PHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
Cabinets 101: Configuring A Network Or Server Cabinet
Cabinets 101: Configuring A Network Or Server Cabinet North, South and Central America White Paper May 2012 www.commscope.com Contents Background Information 3 What is a network or server cabinet? 3 What
A sophisticated design for a demanding field. prima series
A sophisticated design for a demanding field prima series 2 nd edition 2003 prima compact horizontal interlocked sockets carefully studied A size for all versions with or without fuses. Extends horizontally
I/A Series HARDWARE Product Specifications. G50 Server Enclosure PSS 21H-2X50 B4 FEATURES
I/A Series HARDWARE Product Specifications G50 Server Enclosure PSS 21H-2X50 B4 Note: Shown without Cable Base (Included) The I/A Series G50 Server Enclosure with front and rear access provides environmental
19 NETbox SOHO Network Wall Mounting Cabinets FAMILY
9 NETbox SOHO Network Wall Mounting Cabinets FAMILY DETAILS: Framework- Top/Bottom Cases: Multi Folded Automated Bending technology applied framework and top/bottom cases, provides a heavy duty structure
Knürr System Accessories
Knürr System Accessories Features BLANKING PANELS Design identical to racks Tool-less, threaded version available. Varying sizes for quick mounting and efficient cooling. Mechanical accessories are fundamental
39HQ Airovision Air Handling Units
39HQ Airovision Air Handling Units Mounting instructions CONTENTS 1 - TRANSPORT AND LIFTING INSTRUCTIONS... 3 1.1 - General... 3 1.2 - Transport and storage... 3 1.3 - Roof edge protection during transport
PLASTIC CONTAINERS CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS
CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS INDUSTRIAL CONTAINERS 64 CONTAINER HOLDING TROLLEYS for the coloured containers always
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
Integral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
Stainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
Networking Cabinets > Part No Capacity Available Colors Height(mm) Width(mm) Depth(mm)
Wall Mount Cabinets Link IT Single Sided Wall Mount Cabinets Welded frame, reliable structure Standing or wall mounting installation Easy mounting installation 19 standard installation Removable side panels,
MODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: [email protected] Model HSR-007
CNC Tool Storage Solutions
CNC Tool Storage Solutions SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
Knürr DCM Rack System
Knürr DCM Rack System Market-leading Data Center Technologies for your Company Integrated solutions. Integrated benefits. Integrated energy efficiency. Reliability: Proven business-critical technologies
CNC Tool Storage Solutions
Solutions CNC TOOL STORAGE SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
SSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
Confort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
CNC Tool Storage Solutions
CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in
Dimensions (HxDxW) Total Cabinet Area 89.96x 39.69 x 24 in/ 2,285 x 1,008.17 x 612.77 mm 95.47x 48 x 32 in/ 2,425 x 1,219.2 x 812.
1 Compaq 10000 Series Racks The 10000 series racks are a family of 1000mm deep racks which are available in 22U, 36U, 42U and 47U 600mm widths. Compaq 10000 Series Racks provides a common, integrated platform
STB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
How To Build A T7 Rack For Information Technology
THE NEXT GENERATION RACK FOR INFORMATION TECHNOLOGY THE RACK CABINET FOR INFORMATION TECHNOLOGY T7, THE HI-TECH HEART OF THE BLADESHELTER SYSTEM The real answer to the requirements of: Safety Versatility
DELTA3-1. Delta 3 Data Centre Rack Solution
DELTA3-1 Delta 3 Data Centre Rack Solution Contents Building on more than 50 years of British design and innovation, Cooper B-Line introduces Delta 3 ( Delta cubed ). Designed to offer M.O.R.E. to customers
Edition Perfect combination ratiopacpro Electronic P Edition kaging www clear order..biz information in the catalogue
ratiopacpro Overview... 0 Cabinets... 1 Y Desk-top cases Y Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 06800002 Subracks/ 19" chassis...
-1- SPECIFICATIONS 002085 CONE SETTER PLATFORM ATTACHMENT INDEX
-1-002085 CONE SETTER PLATFORM ATTACHMENT INDEX I. GENERAL EQUIPMENT : A. Intent Statement B. Cone Setter Platform II. III. 1. Understructure Frame 2. Mounting Components 3. Paint 4. Basket 5. Labels 6.
know-how Giant in distributing electricity for industry Prisma GK
Prisma GK Giant know-how in distributing electricity for industry Installation system up to 630A for electrical power distribution and circuit control. Prisma GK: technology and innovation for an IP55
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
NEW RANGE OF CABINETS DRIVIATM. Innovation at your service. THE GLOBAL SPECIALIST in electrical and digital building infrastructures
NEW RANGE OF CABINETS DRIVIATM Innovation at your service THE GLOBAL SPECIALIST in electrical and digital building infrastructures Drivia true innovation The new electrical panel for the residential and
Technical catalogue convectors POLAND 2012
Technical catalogue convectors POLAND 2012 index convectors review...3 Narbonne...4 Narbonne VT... 10 Narbonne V... 16 Narbonne V VT... 20 mounting distances for Narbonne...26 mounting distances for Narbonne
Guide to enclosures for potentially explosive atmospheres
Guide to enclosures for potentially explosive atmospheres Guide to enclosures for potentially explosive atmospheres The safety of every application, in every environment, thanks to ATEX-certified steel,
STORAGE DESIGN LIMITED
Cupboards Cubio have a huge capacity and are available in two types. Standard duty storage are designed to allow organised storage of parts and tools in a range of plastic bins on adjustable shelves. Heavy
EXIT HARDWARE. Uniclass L418184. CI/SfB (31.59) Xt7 VERSION: AUGUST-11. An ASSA ABLOY Group brand
EXIT HARDWARE The safe choice in eiting. High performance, high traffic devices that provide egress efficiency, freedom of movement and robust security. Uniclass L418184 VERSION: AUGUST-11 CI/SfB (31.59)
Powerware Enclosure Solutions Product Focus
Powerware Enclosure Solutions Product Focus Powerware Enclosures IT availability and reliability are critical corporate issues in today s demanding, mission-critical environments. For this reason, it is
Components for System Solutions E9/5. Ex d Enclosure System Made of Light Metal or Stainless Steel, "Flameproof Enclosure" Series 8264. www.stahl.
> Installation chamber can be fully used > Up to three mounting levels can be used > Saving of weight > Compact > Easy to combine > 26 enclosure versions > 15 window versions www.stahl.de 10303E00 The
Casement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
Secure your IT equipment with confidence... secure with NetClosure
Secure your IT equipment with confidence... secure with NetClosure SERVER CABINETS NetClosure s REM Series Server Cabinet is the ultimate solution designed and engineered for demanding data center environments.
Free-Stand Cabinets PROLINE Network Switch Cabinets
763.422.2588 Spec-00525 M763.422.2661 Free-Stand Cabinets PROLINE Network s Free-Stand Cabinets PROLINE Network s PROLINE Network INDUSTRY STANDARDS EIA 310-D APPLICATION PROLINE Network Switch cabinet
V80 HEAD DETAIL - SECTION VIEW DRAWING SCALE 1:2. Dwg. No. V10101. 13mm min. 85mm. 72mm 95mm 65mm. 26mm. 10mm 60mm 75mm. 135mm.
13mm min. 72mm 95mm 65mm 85mm 26mm 10mm 60mm 75mm 135mm 145mm V80 HEAD DETAIL - SECTION VIEW Dwg. No. V10101 Manually operated blind with gearbox showing 90 & 45 degree crank penetrations in section view.
Linear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
How To Build A Compact Rack By Kn\U00Fcrr Www.Knuerr-Smaract.Com
19 COMPACT RACK by knürr www.knuerr-smaract.com smaract Network and server rack Compact 19 technology construction Passive and active components Innovation today: smaract The Knürr smaract Compact Rack
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
HVAC air curtains. Type InduAir
Air Conditioning Cooling Heating Ventilation HVAC air curtains Type InduAir The Energy Saving air curtain for Industrial Applications InduAir The solid, self-supporting housing of the energy saving air
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
CONTENTS PRODUCTS SET-UP 3D DRAWING TEMPLATES SOLUTIONS 1... 3 PANEL SYSTEM 2... HARD CASE & BAGS
Made in UK CONTENTS PRODUCTS 1... 3 PANEL SYSTEM Welcome to the dealer pack! 2... HARD CASE & BAGS The banner stand is a unique exhibition product manufactured in the UK. It was developed to offer a legitimate
Trailer Bodywork. Plywood Steel & Aluminium Sheet Safety & Security Products
Plywood Steel & Aluminium Sheet Safety & Security Products Contents Inspection doors Horsebox, Boxvan & Livestock Horsebox coated panels. HB0, HB0 & HB Horsebox coated panels. HB0, HB0 & HB0 Body panels,
ALUMINIUM SYSTEMS S.A.
ΡΟΛΑ ΑΠΛΑ και ΘΕΡΜΟΜΟΝΩΤΙΚΑ NORMAL & THERMAL INSULATING ROLLER SHUTTERS ALUMINIUM SYSTEMS S.A. ALUMINIUM SYSTEMS S.A C.AL.COM,.,,,.,,.. C.AL.COM. C.AL.COM. About us C.AL.COM is a modern dynamic commercial
InForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
CABINET & ENCLOSURE WWW.LINKBASIC.COM STANDARD FEATURES MATERIALS APPLICATION N C B C A B I N E T P/N:NCB
STANDARD Comply with ANSI/EIARS-30-D, DIN9; PART, IEC97-, DIN9; PART7, GB/T307.-9 standard. Compatible with metric ETSI and 9 inch international standard. FEATURES Exquisite design with precise craftsmanship
Alpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service
P System Cubicles. Certified for more safety
P System Cubicles Prisma Plus LV Switchboards Certified for more safety Prisma Plus, an offer thought out for greater professionalism With the Prisma Plus P system, Schneider Electric proposes high-performance
Coyote popup features
Coyote popup features The Coyote popup display system combines strength, reliablility, and style in a lightweight and easy to use system. It is fully magnetic, making it simple to assemble and disassemble,
Knürr Synergy The New Product Family For Uniform Equipment In Your Control Room. Knürr Technical Furniture
The New Product Family For Uniform Equipment In Your Control Room Knürr Technical Furniture Knürr Synergy The New Product Family Knürr offers a product family for uniform equipment and furnishing in the
TriLine ASSEMBLY System PowerModules
04 2012 TriLine ASSEMBLY System PowerModules TriLine ASSEMBLY system Contents Introduction The new modular system intelligence 2 Delivery formats 8 EDS PowerCon configuration software 10 Technical specifications
Motorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401
CaraD-RF 1/10 63.1 Content.DOC Motorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401 Ordering Details Technical Drawing without Fly Net Door Technical Drawing with Fly Net Door Technical
Standard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
Relay mounting systems
Page 1 Issued July 1998 Changed since April 1997 Data subject to change without notice RL COMBIFLEX RE 500 (SE 94832) (SE 970140) (SE 950216) Features Suitable for standard 19 rack, flush, semiflush, projection
DCF Optimized Rack System
Integrated Cabinet Solutions For Business-Critical Continuity DCF Optimized Rack System User Manual IMPORTANT SAFETY GUIDELINES SAVE THESE INSTRUCTIONS This manual contains important instructions that
Terminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
AMS 120. EFT Guest Card Terminal & Refund unit
AMS 120 EFT Guest Card Terminal & Refund unit ACCOUNT MANAGEMENT STATIONS Wall mounted kiosk offering Visitor card purchase and refund Card deposit EFT purchase, refund and loading Full statement facilities
ABLOY EXIT. Functional and technical descriptions Single and double leaf doors. An ASSA ABLOY Group brand
SSFN 014/2 2 ABLOY EXIT Functional and technical descriptions Single and double leaf doors An ASSA ABLOY Group brand ABLOY EXIT - EXIT PRODUCTS It is time to take the exit safety standards to a new level.
Roofboxes ENITH. Zenith, Room for Prestige.
Roofboxes ENITH Zenith, Room for Prestige. 3 Sheer elegance. Zenith. a valuable investment in travel comfort. The Hapro Zenith is in a league of its own. Full attention has been given to its beautiful
Type 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
Cold Room & Refrigeration System (Casserole Assembly) No of units: 1
Technical Specifications Cold Room & Refrigeration System (Casserole Assembly) No of units: 1 For chiller storage of all sorts of items Chiller storage temperature: 2-5 C Provides excellent thermal efficiency
4RU High Density Shelf Installation Instructions
4RU High Density Shelf Installation Instructions Table of Contents General Product Information... 1.0 Safety Precautions... 2.0 Tools Required... 3.0 Package Contents... 4.0 Installing the Product Unpacking...
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
Switchboard system. NorLine 800
Switchboard system NorLine 800 NorLine 800 SWITCHBOARD SYSTEM 2 NorLine 800 Switchboard system Table of contents Subject Page Table of contents 2 Overview 2-3 NorLine 800 technical specifications 4 Structural
Climasys Thermal Management System. Schneider Electric Universal Enclosures 2009
Climasys Thermal Management System Schneider Electric Universal Enclosures 2009 Schneider Electric Universal Enclosures The specialist in sealed equipment What is the mission of Schneider Electric Universal
PLASTIC VOLUME CONTROL DAMPERS OVERVIEW TYPE: GGB
OVERVIEW TYPE: GGB All composite construction Rigid extruded upvc aerofoil blade section Integral blade seals for low leakage operation Individual blades driven via reinforced styrene gear wheels in maintenance
Coyote popup features
Coyote popup features The Coyote popup display system combines strength, reliablility, and style in a lightweight and easy to use system. It is fully magnetic, making it simple to assemble and disassemble,
Preface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable