ABB. Installation Enclosures Meter Boxes. SMB s. DMB s. Enclosures

Transcription

1 Meter Boxes SMB s To house a single phase kilowatt hour meter Standard kwh meter mounting Square or triangular securing screw Stand off for circuit breaker Optional circuit breaker reset rod DMB s To house up to 3 single phase kilowatt hour meter Meter mounting on base plate Available with meter reading window or blank Square or triangular securing screw Facility for circuit breaker mounting Optional circuit breaker reset rod 1/259

2 Watertight boxes J1 - J4 Range Industrial general purpose enclosure Screw lid or slide lid options Device plate available in DMC U2 - U8 Range Use for general purpose/connection enclosure Screw lid or slide lid options Device plate available in DMC or chipboard 1/260

3 Distribution Boards WDB Range Weatherproof range Available with plain or window lid Earth and neutral bar - Standard Lockable latches - Standard Stainless steel hinges Material Polyester (DMC) YB Range Surface distribution board for DIN Rail or cliptray circuit breakers Din rail optional Earth and neutral bar - Standard Blank lids available Conduit knockouts - Standard Cliptray F081 Weatherproof slide lid distribution board Supplied in samite or din Surface or semi flush mount 1/261

4 Sahara Range Flush Mount Distribution Boards Conduit knockouts on sides The snap-closing door can be left-hand or right-hand hinged Easy passage of wires between box bottom and din rails Neutral and earth terminals supplied Available in plain and smokey door Surface Mount Distribution Boards Conduit knockouts on sides The snap-closing door can be left-hand or right-hand hinged Easy passage of wires between box bottom and din rails Neutral and earth terminals supplied Available in plain and smokey door 1/262

5 Bundle Boxes and Ready Boards Bundle Boxes Cost effective pole top distribution boxes Pole brackets fitted Self captivating screws in cover Cover attached to base with cord Easy working conditions when cover is removed Various circuit breaker configurations available Main connection tails optional Ready Boards Cost effective electrical installations Completely wired and equipped with any circuit breaker and socket combination Can be supplied with bulkhead fitting or a plug-in luminaire Internal Hinges Optional mounting rails Knockouts for conduit or twin and earth - Standard VO flammability rated Pool Boxes Completel empty Suitable for DIN or Cliptray MCB s Can accommodate timers and transformers Weatherproof 1/263

6 Household Accessories Weatherproof Plug Boxes Outdoor weatherproof socket outlet Socket supplied as an option Lid can be closed while plug is in socket Available in single or double socket configuration Surface Extension Boxes Surface mount switch/socket boxes Can accommodate all local switch / socket types Knock out facilities - Standard Isolator Boxes Isolator housing Isolator mounting screws provided Pad lockable facility optional Weatherproof or non weatherproof type Material - Polyestr (DMC) 1/264

7 Industrial / Modular AP Range Industrial general purpose enclosure Available with plain or with window Masonite device plate supplied (standard) DMC Device plates available Hinges and lockable latch supplied Viro type night latch optional S Range Industrial enclosure used for push buttons, pilot lights and general purpose Device plates available in DMC and metal RL Range Industrial general purpose enclosure Available in plain or with window Device plates available in DMC Hinges - optional in stainless steel or plastic Stainless steel lockable latch available 1/265

8 Terminal Range / Enlec Terminal Range Installation Terminal Range / Enlec RL Range OKARI ENLEC Range Comprehensive range for individual requirements External lid/base fastening with stainless steel quarter turn screw Metal device plates are optional on this range Neoprene seal and precision fit on all enclosures are available in clear and plain lids All securing points are external for added protection Material - Polycarbonate Optional hinges, designed exclusively for this range Spring Action Screw 1/266

9 Modular RL Range Industrial general purpose enclosure Available in plain or with window Device plates available in DMC Hinges - optional in stainless steel or plastic Stainless steel lockable latch available OKARI Modular wall mounted GRP enclosure Water resistant Mechanically strong Self extinguishing Thermally stable Non conductive Colour impregnated Electrically stable Non corrosive Non toxic fumes Available in grey or orange Clear lids also available Metal or GRP device plates available Hinges available in grey or orange 1/267