IEEE81 Motors Crown Triton TM Series 5 Year Warranty Chemical and Process Duty Motors, IEEE81 (009) Premium Efficiency, TEFC Severe Duty Corona Resistant Magnet Wire ClassⅠ, Division, roups A, B, C, D ClassⅠ, Zone, roups ⅡA,ⅡB &ⅡC
Experience Combined with Technology yundai Induction Motors use Finite Element Analysis (FEA) and Computer Aided Design (CAD) methods to develop and produce the most innovative motors from stateoftheart and fully automated manufacturing facilities. yundai s Crown Triton TM cast iron frames greatly improve motor performance by maximizing heat dissipation. The use of advanced technology to design and manufacture electric motors results in a reasonably priced top quality motor with superior performance characteristics. Approvals : CSA C US, EEV mark, ClassⅠDivision (CSA only)
IEEE81 Motors IEEE81 Chemical & Process Motors Product Range Frame size : 13T to 9TZ orsepower : 1 P to 50 P Poles :,,, 8 pole Enclosure : TEFC, Rigid cast iron construction Standard Features & Construction YUNDAI EAVY INDUSTRIES Approvals & Standards: 5 Year (0 months) warranty Full compliance with IEEE81 (009) standard Meets or exceeds NEMA M1 (00), Part 31 Premium efficiency meet or exceeds EISA 007 requirements, as found in NEMA M1 table 11 Fully tested per IEEE11, method B Approvals : CSA C US, EEV mark UL certification for Industrial Motors, CSA certification for Inverter duty and CSA certification for ClassⅠ, DivisionⅡ Certified for ClassⅠ, Division / Zone, roups A, B, C & D / ⅡA,ⅡB &ⅡC with temperature code T3C for NEMA 10T to 30T frames and T3A for NEMA 30T to 0T frames IEEE81 motor test report supplied with each motor Winding & Inverter Powered Ratings: yundai s inverter shield insulation system using inverter grade magnet wire and yundai s own low stress winding technique for exceptional corona and transient protection. Constant torque 10:1 speed range Variable torque 1,000:1 speed range Suitable for 1.5 times of base speed, constant P (subject to mechanical limits) 1.15 SF at 0 C, 1.0 SF at 5 C Class F insulation with Class B temperature rise Class nonhygroscopic varnish, double dip & bake cycles Single voltages, 0 V or 575 V, 0 z full range Supply voltage +/10 %, frequency +/5 % Altitude up to 3,000 feet (1,000 meters) without derating; ambient temperature from 30 C to +0 C Construction: Totally Enclosed Fan Cooled, IP55 Protection Full construction per IEEE81 (009) Nema design B torque Stainless steel nameplate, corrosion resistant zinc plated hardware Corrosion resistant, nonsparking polypropylene cooling fan Corrosion resistant severe duty paint on motor frame & rotor and additional epoxy resin on stator winding Stainless steel condensation Tdrain plugs on DE & NDE round lug on motor frame and inside conduit box Oversized conduit box exceeds CSA, NEMA and NEC volume requirements Neoprene lead separator Precision foot flatness eliminates soft foot and extends bearing lifem, to within 0.005 Precision balanced rotor not to exceed 0.08 inches/second peak velocity Bearings: PROTEC TM (IP) labyrinth bearing isolators on both bearings Oversize vacuum degassed bearings Regreaseable bearings with internal bearing caps on DE & NDE Mobil Polyrex EM grease (35 C to +50 C) Bearing temperature rise (direct coupled) will not exceed 5 C (50 C for pole motors) C & D flanges kits available for field modification
Premium Efficiency Motors Your Seal of Approval The Ultimate in Bearing Protection The Bronze Age is Out : ightech Bearing Isolators are in PROTEC TM vs Bronze Corrosive test results prove PROTEC TM s rotating labyrinth seal is superior to bronze IP rated, PROTEC TM utilization of PTFE (raphite / Teflon) provides impressive sealing and longevity performance True Noncontact seal. Will not wear out. No friction losses Custom formulated reinforced impervious PTFE material No internal Orings Twoway seal. Nothing in. Nothing out Zero lubricant leakage Total exclusion of contaminants Replaces radial lip oil seal or bronze seals Extends bearing life (less maintenance) IP UL tested for dust and water / chemical exclusion Corrosion resistant for 10 types of chemicals Optional FDA food grade, anti microbial available YUNDAI EAVY INDUSTRIES 5
IEEE81 Motors IEEE81 Chemical & Process Motors IEEE81 Chemical and Process Duty Motors Meets or exceeds IEEE81 standard (009) ClassⅠ, Division, roups A, B, C & D, T3C temp. code for NEMA frame 10T to 30T, and T3A for NEMA frame 30T to 0T Full cast iron construction Fully regreaseable bearings with inner bearing caps Precision 5plane balance, shaft runout and foot flatness Premium efficiency meets or exceeds EISA 007 requirements Equipped with PROTEC TM (IP) bearing isolators Class F insulation with class B temperature rise Inverter grade insulation system meets or exceeds NEMA M1 Part 31 (00) 3phase, 0 z, 0 V and 575 V, SF 1.15, continuous duty Frame Size 13T 15T 18T 18T 13T 15T 5T 5T 8TS 8T 8TS 8T 3TS 3T 3TS 3T 3T(L) 3TS 3T 35TS 35T 0T 05TS 05T TS T 5TS 5T 7TS 7T 7TZ 9TS 9T 9TZ BA.5.5.75.75 3.50 3.50.5.5.75.75.75.75 5.5 5.5 5.5 5.5 5.5... 1.88 1.88 1.9 15.9 18.33 19.83 3.13.8.7.13.3 7.71 9.59 31.09 9.59 31.09 3 31.88 1 31.88 1 39. 3. 39. 7.15 5.1 7.15 5.1 50.5 8.71 50.3 55.77 53.83 55. Note: 1. Dimension "D" Tolerance 10T30T : +0.00, 0.03 00T0T : +0.00, 0.0 (Unit : inch) Overall Shaft Mounting Conduit Box Fig. C D O P U NW E F1 F AA AB 3.50 3.50.50.50 5.5 5.5.5.5 9.00 9.00 9.00 9.00 7. 7. 9.5 9.5 1.75 1.75 1.8 1.8 1.8 1.8 1.0 1.0 1.0 1.0 1.0 1 1 1 1 0.79 0.79 0.79 3.19 3.19 3.19 3.19 3.19 3.19 3.19 3.19 3.19 3.19 7. 7. 9.89 9.89 11.50 11.50 1.7 1.7 1.19 1.19 1.19 1.19 18.3 18.3 18.3 18.3 0.1 0.1 0.1.0.0.0.0.0.0.0.0.0.0 1.15 1.15 1.375 1.375 1.5 1.5 1.5 1.5.15.15.15.375.375.875.15.875.375.375.375.375. Dimension "U" Tolerance Up to 1.500 Dia. : +0.000, 0.0005 1.5 Dia. & Larger : +0.000, 0.001.5.5.75.75 3.38 3.38.00.00 3.5. 3.5. 3.75 5.5 3.75 5.5 5.5 3.75 3.75 7.5.5 7.5.75.75.75 10.15.75 10.15 R 0.771 0.771 0.98 0.98 1.01 1.01 1.1 1.1 1.1 1.1 1.85 1.85 1.85.01.01.50 1.85.50.01.880.01.880.01.880.880.01.880.880 Keyway ES 1.1 1.1 1.78 1.78.1.1.91.91 1.91 3.8 1.91 3.8.03 3.91.03 3.91 3.91.03.8.03.8 5.5.80 5.5 3.93 3.93 3.93 3.93 S 0.188 0.188 0.50 0.50 0.31 0.31 0.375 0.375 0.375 0.375 0.5 0.5 0.750 0.750 0.5 0.5 0.5 0.5 5.50 5.50 1.50 1.50 1.50 1.50 1.50 1.00 1.00 1.00 1.00 1.00 1.00 1.00 (5.00) 5.00.50 5.50 5.50 8.5 9.50 9.50 (1.00) (1.00) 1.00 1.00 1.00 (1.5) (1.5) 1.5 1.5 (13.75) 13.75 13.75 (1.50) (1.50) 1.50 1.50 0.00 0.00 0.00 5.00 5.00 5.00.00 (.00) 10.50 10.50 (10.50) (10.50) (10.50) 11.5 11.5 (11.5) (11.5) 1.5 (1.5) (1.5) 1.50 1.50 (1.50) (1.50) (17.99) (17.99) (17.99) (0.00) (0.00) (0.00) 0.75 0.75 0.75 0.75 1.00 1.00 1.5 1.5 1.50 1.50 1.50 1.50.00.00.00.00.00.. 7.0 7.0 8.59 8.59 11.88 11.88 1.3 1.3 1.3 1.3 17.13 17.13 17.13 17.13 0.8 0.8 0.8 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. A B FI. A FI. B YUNDAI EAVY INDUSTRIES
Performance Data [for 0 V & 575 V Motors] IEEE81 Chemical and Process Duty Motors 3 phase, 0 z, 0 V and 575 V, SF, 1.15, continuous duty TEFC enclosure, class F insulation, 0 C ambient temp. Rated Output (P) Pole Frame Size Characteristics at Rated Output Full Load Speed (RPM) Efficiency Full Load Nom.(%) 3/ Load (%) Full Load (p.u.) Power Factor @ 0 V (A) Full Load Current @ 575 V (A) @ 0 V (A) Locked Rotor Current Torque Moment of Inertia WK (lb.ft ) NEMA Code Letter Approx. Weight (lbs) Locked Rotor (% FLT) Full Load (lb.ft) Breakdown (% FLT) @ 575 V (A) 1 1.5 3 5 7.5 10 15 0 5 30 0 50 0 75 100 15 00 50 13T 13T 15T 13T 15T 18T 15T 15T 18T 18T 18T 13T 18T 18T 15T 13T 13T 5T 15T 15T 5T 5T 5T 8T 5T 5T 8T 8TS 8T 3T 8TS 8T 3T 3TS 3T 3T 3TS 3T 35T 3TS 3T 0T 35TS 35T 05T 05TS 05T T TS T 5T 5TS 5T 7T 7TS 7T 9T 9TS 9T 3500 110 3500 1735 110 3500 1735 1155 3515 3515 1 350 355 3535 1775 3535 1775 350 1775 350 1775 350 350 1785 1785 1785 1785 7 85.50 8 85.50 8 8 91.00 90.0 91.00 9.0 9 9 9 9 9 9.0 9.10 9.10 9 9.50 9.10 9.10 9.50 9.50 95.0 9.50 9.50 95.0 95.0 95.0 9.0 9.0 77.0 85.0 8.70 8.0 8.70 87.70 85.70 8.70 88.70 8.70 89.0 88.70 89.70 89.70 91.10 90.30 91.10 9.0 91.80 9 91.80 93.80 9 93.80 9 9.0 9.10 9.30 9 9.50 9.30 9.10 95.10 9.70 9.50 95.50 9.70 9.50 95.0 95.0 95.50 95.0 95.90 9.00 95.0 9.30 9.00 9.30 0.80 0.700 0.50 0.80 0.70 0.80 0.730 0.700 0.790 0.80 0.80 0.800 0.700 0.80 0.790 0.70 0.870 0.805 0.750 0.890 0.815 0.70 0.890 0.815 0.770 0.890 0.80 0.800 0.890 0.80 0.800 0.895 0.80 0.80 0.895 0.80 0.80 0.915 0.80 0.915 0.80 0.905 0.85 0.900 0.880 0.900 0.880 0.900 0.880 0.900 0.880 1.5 1. 1.8.0..3. 3.8 3.9.5.1.5 7. 9.0 9.5 10.3 1.0 1.8 13.8 1.9 18.3 19.8 3.1.8.7 8.5 30.3 31. 33.8 37.1 5.5 8.8 8.8 55.8 59.9 0. 5. 9.9 71. 79.8 85.1 87.0 110.1 11.1 11. 139.5 1.0 17.7 11.5 13.8 19.5 19.3. 31. 7. 81.7 1. 1.3 1. 1. 1.8 1.9.1.. 3.1 3..9 5. 5.9 7. 7. 8. 9. 10. 11.0 13.5 1.7 15.8 18.5 19.9 1.3.8. 5.0 7.1 8.8 9.7 3. 39.0 39.0. 7.9 8.1 5.5 5.0 5.9 3.9 8.1 9. 88.1 91.3 93.3 111. 113. 118.1 19. 131.0 135. 175. 177.9 185.0 1.3 5. 1.9 1. 1.0 19. 0.0 19.7..7.0 8.5 30.1 3.7 5.8 9.3 50..8 73. 9.7 81. 95. 93.8 113.3 1.7 13.7 19.9 18.9 17.0 199. 05.7 1. 3.8. 5. 9.0 31. 331.8 38. 19.5 09.3.1 8. 7.7 5.9 587. 591.3 770.5 71.5 79.7 97. 99. 99.7 1130.3 11. 115.9 153.9 155.7 157. 193.1 1971.9 11.9 11.7 11. 15.7 1.0 15.8 19.7 19.8 19..8.1.1 3. 39. 0.3 50. 58.7 55.8 5.3 7.5 75.0 90.7 99.7 10. 10.0 135.1 10.8 159.3 1. 19.8 189.5 195.7 01.9 3.8 73.3 5.5 9. 335. 37. 35.8 37.9 381. 3.3 9.9 73.1 1. 593. 3. 781.0 795. 797. 90.3 917.1 9.3 17.9 15. 157.7 158.9 1577.5 1.5...5.7.1 9.1. 8.8 13. 7. 1.8.3 11.0.0 3 15.0 30.0 5.0 1.9 3.7.0 9.9 59.5 89.9 3. 73. 110.9 3.5 87.3 131.9 59. 118.7 178. 73. 1..0 88.8 178.1 7.5 108.5 17.7 37.0 18.0 9.8 5.9 187.5 375.0 5.8 17.1 3. 5.0 9.0 59.0 891.8 375.0 79.9 00 80 185 0 190 5 190 190 10 10 190 10 00 10 00 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 70 310 75 0 90 70 50 80 0 0 80 50 0 0 0 50 50 0 0 50 50 0 0 50 0 30 30 30 30 30 0.031 0.059 0.083 0.033 0.07 0.593 0.0 0.078 0.71 0.071 0.190 0.99 0.1 0.309 1.3 0.33 0.570.13 0.51 0.71 8 0.9.13.98 1.13.35.100 1.899 3.90 8.09.089 5.578 10.3 3.987 7.11.50.7 8.307 0 9.80 17.0.80 0.900 55.310 1 35.910 73.10 7.0 5.510 89.80 3 7.30 10.310.130 730 153.550 58.330 105.370 N N N M M L L L L K K 53 53 55 53 55 90 55 55 105 90 90 105 105 15 0 15 15 300 0 0 30 300 300 390 380 380 550 10 10 50 550 550 780 50 50 80 780 780 110 80 80 1 1110 1110 1530 110 1530 0 1770 10 1970 1900 30 30 30 Premium Efficiency Motors 7 YUNDAI EAVY INDUSTRIES Note: 1. The above data are average expected values.. Actual minimum efficiencies can be certified by direct measurement based on ANSI/IEEE11 test method B and CSA C 390.: 3. Technical data are subject to change without notice.
United States Motor Representative WorldWide Electric Corporation Warehouse Locations Allentown, PA / Atlanta, A / Dallas, TX / Indianapolis, IN / Kansas City, KS Los Angeles, CA / Miami, FL / Rochester, NY Available For PickUp Or Delivery ours A Day 7 Days A Week Sales Offices Rochester, NY / Atlanta, A / Birmingham, AL / Boston, MA / Cape irardeau, MO / Chicago, IL Dallas, TX / Denver, CO / Indianapolis, IN / Los Angeles, CA / Memphis, TN / Portland, OR / Tulsa, OK ISWCNEB10, 011. Designed by C Communication Portland, OR Rochester, NY Boston, MA Chicago, IL Denver, CO Kansas City, KS Indianapolis, IN Allentown, PA Los Angeles, CA Tulsa, OK Cape irardeau, MO Memphis, TN Dallas, TX Birmingham, AL Atlanta, A WorldWide Electric Corporation P.O. Box 307, Pittsford, NY 153 USA Tel: 800808131 Fax: 80071111 www.worldwideelectric.net Miami, FL ead Office 1, eonhadong, Donggu, Ulsan, Korea Tel: 850857~8, 881~ Fax: 850850 Seoul 10, yedong, ongnogu, Seoul, Korea (Sales & Marketing) Tel: 877515, 77 Fax: 87779