Ref/VTI/TTS/FRZWL/dm/01 TECHNICAL / FINANCIAL BID Car 2nd Hand EFI Technology (Estimate: 603,542/-) TERMS & CONDITIONS FOR PURCHASES / PROCUREMENTS UNDER TENDERING / BIDDING: Firm Name: M/s Proprietor Name: NIC #. NTN #: Sales Tax #. Address: Ph #: Cell # Conditions: 1- General i. Any offer which is not received as per terms and conditions of the tender enquiry is liable to be ignored. No offer shall be considered if: a. Received without earnest money. b. It is received after the time and date fixed for its receipt. c. The tender is unsigned d. The offer is ambiguous e. The offer is conditional f. The offer is from a black listed firm. g. The offer is received by fax or e-mail h. Offer received with shorter validity than required. i. The offer is not conforming to specifications indicated in the tender enquiry. j. The tender documents are not signed by the supplier or his authorized person(s). Page 1 of 14
ii. Offer must remain valid for at least 30 days from the date of opening the tender. iii. The covering letter should indicate particulars of tender, and date of opening. The envelope must be properly sealed. iv. The purchaser reserves the right to purchase full or part or ignore / scrap / cancel the tender without assigning any reason(s). The earnest money / security shall be forfeited if: a. The acceptance of tender is not issued during the validity period by the successful bidder within stipulated time period. b. The offer is withdrawn, amended or revised during the validity period of the offer without approval of the buyer. c. The contractor fails to execute the contract strictly in accordance with term and condition of the tender. v. The tenderer shall enclose catalogues / leaflets / literature and other technical information, if any, in respect of items offered by him. vi. The contractor will be responsible for the free replacement of items if the same is found to be substandard by the purchaser and or at variance with the specifications given in the tender enquiry. Items offered of a specification superior to the one specified in the tender enquiry may be accepted by the purchaser. vii. Where offers have been invited for specified quality, offers of other quality shall not be acceptable. viii. Items should be brand new and in original manufacturers packing. ix. One year free service and supply of spare parts must be guaranteed by the bidder. x. The tenderer should indicate their National Income Tax & Sales Tax Number. xi. The tenderer will produce documents if required by purchaser to ensure that store supplied is brand new and in original packing of manufacturer. xii. The quoted price should clearly indicate whether it includes taxes or not. xiii. The purchaser is entitled to deduct all prevailing taxes. Page 2 of 14
3- Technical Advice The VTI, Toba Tek Singh may seek technical advice for vetting tender offers from any person having appropriate knowledge / experience in the relevant field. 4- Bids will be evaluated in term of technically and financially. The Purchaser has the liberty to reject the lowest bidder if the quoted material has been found the low quality and not fulfilling the required results, which are expected for better quality results. 5- Delivery of Items. Delivery of Items must be insured within 15 days after supply order. 6- Inspection of Items Inspection of the delivered item shall be conducted by purchase committee, which has a technical member especially for this particular purchase, before its acceptance. 7- Payment to the Contractors i. Payment of the amount will be made through crossed cheque to the supplier against invoice submitted to the Principal VTI after 100% completion of delivery, installation / commissioning and satisfactory performance. President DBOM / Purchase committee / Principal VTI will determine the status of the completion of supply and issue instructions for payment. ii. Payment against partial supply will not be made until goods have been received & satisfactory report has been generated. 8- Earnest Money Earnest money @ 2% of estimated cost mentioned in tender notice will have to be deposited along with tender documents. It should be in the Page 3 of 14
form of Bank Draft / Call Deposit in favor of Principal Vocational Training Institute Toba Tek Singh. Earnest money shall be refunded on successful completion of the contract. The earnest money furnished by the firm may be retained for adjustment of the amount due against the firm incase the said firm is defaulter against any other contract. 9- Refund of Security Deposit Security deposit shall be refunded to unsuccessful bidders within 15 days after the award of the contract. 10- Deduction of Taxes Income and other taxes will be deducted while making payment as per Government instructions / notifications / rules. 11- Payment of Sales and other Taxes Purchase should be made from the firms registered with sale & income tax departments. 12- Performance Bond One-year performance bond / bank security equivalent to 10% of the total contract price will have to be furnished at the time of delivery of equipment. 13- Termination of Contract The President DBOM on the recommendation of the purchase committee may terminate this supply order for valid reasons and will inform the supplier about his decision in writing. 14- With Holding Tax Withholding tax will be deducted on the supplies of goods, services and contracts as per income tax and sales tax rules. Page 4 of 14
15- Submission of Tender Last date of submission of the tender is 12-07-2016 at 10:00 am in the office of the principal VTI Toba Tek Singh. 16- Opening of Tender Date of opening the tender is 13-07-2016 at 10:30 am in the office of the principal VTI Toba Tek Singh. Tender will be opened in the presence of all parties / their representatives. Principal VTI Toba Tek Singh Signature & Stamp of Firm Page 5 of 14
Principal VTI Toba Tek Singh TECHNIAL BID Sr. No 01 Items Complete EFI System (Minimum 600 CC Or Above) Doors 4, Power Steering Right hand side, Seats 4, Fuel Petrol Vendor Specification Principal VTI Toba Tek Singh Signature & Stamp of Firm Page 6 of 14
FINANCIAL BID Sr. # Name of Items Specifications Qty Unit Price With Taxes Total Price With Taxes 1 2nd Hand Car for EFI Technology Complete EFI System ( Minimum 600 CC Or Above) Doors 4, Power Steering Right hand side, Seats 4, Fuel Petrol, 1 Principal VTI Toba Tek Singh Signature & Stamp of Firm Page 7 of 14
Ref/VTI/GRW/FRZWL/EHA/01 TECHNICAL / FINANCIAL BID Tools, Equipments & Furniture (Estimate: 190,000/-) TERMS & CONDITIONS FOR PURCHASES / PROCUREMENTS UNDER TENDERING / BIDDING: Firm Name: M/s Proprietor Name: NIC #. NTN #: Sales Tax #. Address: Ph #: Cell # Conditions: 1- General i. Any offer which is not received as per terms and conditions of the tender enquiry is liable to be ignored. No offer shall be considered if: k. Received without earnest money. l. It is received after the time and date fixed for its receipt. m. The tender is unsigned n. The offer is ambiguous o. The offer is conditional p. The offer is from a black listed firm. q. The offer is received by fax or e-mail r. Offer received with shorter validity than required. s. The offer is not conforming to specifications indicated in the tender enquiry. t. The tender documents are not signed by the supplier or his authorized person(s). Page 8 of 14
ii. Offer must remain valid for at least 30 days from the date of opening the tender. iii. The covering letter should indicate particulars of tender, and date of opening. The envelope must be properly sealed. iv. The purchaser reserves the right to purchase full or part or ignore / scrap / cancel the tender without assigning any reason(s). The earnest money / security shall be forfeited if: d. The acceptance of tender is not issued during the validity period by the successful bidder within stipulated time period. e. The offer is withdrawn, amended or revised during the validity period of the offer without approval of the buyer. f. The contractor fails to execute the contract strictly in accordance with term and condition of the tender. v. The tendered shall enclose catalogues / leaflets / literature and other technical information, if any, in respect of items offered by him. vi. The contractor will be responsible for the free replacement of items if the same is found to be substandard by the purchaser and or at variance with the specifications given in the tender enquiry. Items offered of a specification superior to the one specified in the tender enquiry may be accepted by the purchaser. vii. Where offers have been invited for specified quality, offers of other quality shall not be acceptable. viii. Items should be brand new and in original manufacturers packing. ix. One year free service and supply of spare parts must be guaranteed by the bidder. x. The tendered should indicate their National Income Tax & Sales Tax Number. xi. The tendered will produce documents if required by purchaser to ensure that store supplied is brand new and in original packing of manufacturer. xii. The quoted price should clearly indicate whether it includes taxes or not. xiii. The purchaser is entitled to deduct all prevailing taxes. Page 9 of 14
3- Technical Advice The VTI, Toba Tek Singh may seek technical advice for vetting tender offers from any person having appropriate knowledge / experience in the relevant field. 4- Bids will be evaluated in term of technically and financially. The Purchaser has the liberty to reject the lowest bidder if the quoted material has been found the low quality and not fulfilling the required results, which are expected for better quality results. 5- Delivery of Items. Delivery of Items must be insured within 15 days after supply order. 6- Inspection of Items Inspection of the delivered item shall be conducted by purchase committee, which has a technical member especially for this particular purchase, before its acceptance. 7- Payment to the Contractors i. Payment of the amount will be made through crossed cheque to the supplier against invoice submitted to the Principal VTI after 100% completion of delivery, installation / commissioning and satisfactory performance. President DBOM / Purchase committee / Principal VTI will determine the status of the completion of supply and issue instructions for payment. ii. Payment against partial supply will not be made until goods have been received & satisfactory report has been generated. 9- Earnest Money Earnest money @ 2% of estimated cost mentioned in tender notice will have to be deposited along with tender documents. It should be in the Page 10 of 14
form of Bank Draft / Call Deposit in favor of Principal Vocational Training Institute Toba Tek Singh. Earnest money shall be refunded on successful completion of the contract. The earnest money furnished by the firm may be retained for adjustment of the amount due against the firm incase the said firm is defaulter against any other contract. 9- Refund of Security Deposit Security deposit shall be refunded to unsuccessful bidders within 15 days after the award of the contract. 10- Deduction of Taxes Income and other taxes will be deducted while making payment as per Government instructions / notifications / rules. 11- Payment of Sales and other Taxes Purchase should be made from the firms registered with sale & income tax departments. 12- Performance Bond One-year performance bond / bank security equivalent to 10% of the total contract price will have to be furnished at the time of delivery of equipment. 13- Termination of Contract The President DBOM on the recommendation of the purchase committee may terminate this supply order for valid reasons and will inform the supplier about his decision in writing. 17- With Holding Tax Withholding tax will be deducted on the supplies of goods, services and contracts as per income tax and sales tax rules. Page 11 of 14
18- Submission of Tender Last date of submission of the tender is 13-07-2016 at 10:00 am in the office of the principal VTI Toba Tek Singh. 19- Opening of Tender Date of opening the tender is 13-07-2016 at 10:30 am in the office of the principal VTI Toba Tek Singh. Tender will be opened in the presence of all parties / their representatives. Principal VTI Toba Tek Singh Signature & Stamp of Firm Page 12 of 14
Sr. No Items & Specification Furniture / Digital Cam / RAC TECHNIAL BID Vendor Specification 01 Furniture: Office Chairs. Wood ( Sheesham) and Siprit polish, 02 Furniture: Executive Chairs, Revolving 03 Furniture: Cabinits, Wood cabinits, Depth 01 fit,lenth 10 fit, Height 3.4 fit, 04 Furniture: Almirah, Steel 6'x3'', 22 Guage Sheet, 58 Kg 05 Digital Camera: Nikon, LZ40, 20 Mega Pixel, 42x Optical Zoom, Rechargeable Battery, HD Video Recording, 3'' LCD 06 Air Velocity Meter: Battery: 9V, Digital 07 Commercial Drier Filter (Strainer): Size: 01 Ton, 08 Damper with Motor: Volte: 220, 09 De-humidity and Humidity Fire: Principal VTI Toba Tek Singh Signature & Stamp of Firm Page 13 of 14
FINANCIAL BID Sr. # Name of Items Specifications Qty Unit Price With Taxes Total Price With Taxes 1 Office Chairs. Wood ( Sheesham) and Siprit polish, 10 2 Executive Chairs, Revolving 3 Furniture 3 Cabinets, Wood cabinets, Depth 01 fit,lenth 10 fit, Height 3.4 fit, 4 Almirah, Steel 6'x3'', 22 Guage Sheet, 58 Kg 1 1 5 Digital Cam Nikon, LZ40, 20 Mega Pixel, 42x Optical Zoom, Rechargeable Battery, HD Video Recording, 3'' LCD 1 6 Air Velocity Meter Battery: 9V, Digital 1 7 Commercial Drier Filter (Strainer) 8 Damper with Motor 9 De-humidity and Humidity Fire Size: 01 Ton, 1 Volte: 220, 1 1 Grand Total Principal VTI Toba Tek Singh Signature & Stamp of Firm Page 14 of 14