grinding technologies SPECIAL OFFERS July 2016 KS250-3100 FEATURES: Rotating magnetic chuck from 0 to 90 electromagnetic (Polarity 20 mm); Grinding motor 7,5 kw (10 HP); Segment holding ring Ø250; Variable carriage speed from 1 to 30 m/min with carriage run adjustment Automatic grinding wheel downfeed and fully programmable working cycle by means of a digital programmer (PLC); Programmable work cycles: roughing, finishing, spark-out; Longitudinal grinding head angle adjustment from 0 to 3 ; Grinding wheel quick up and down approach, and slow down approach; Separate coolant collection tank fitted with 100 l/min. motor pump; MVM Srl 42015 Correggio (RE ) ITALY- Via del Progresso, 14 Tel. (+ 39) 0522 632266 Fax (+ 39) 0522 642011 Email: mvmsrl@mvmsrl.it - Web site: www.mvmsrl.it
FX350/26 Grinding motor 10 HP Segment grinding wheel Ø250 Magnetic chuck width 180mm Automatic wheel downfeed Magnetic cleaner LA500 Grinding wheel motor 3 HP Automatic downfeed grinding head; Rotating head range 0-70, tilting 0-5 for grinding circular blades; Grinding wheel motor with clockwise and anticlockwise rotation direction; Magnetic chuck; Variable rotating chuck speed 3-35 RPM LA300 Grinding wheel motor 1.5 kw Rotating head range 0-70 Automatic working cycle Base Variable speed of blade support ZX1000 Basement; Grinding motor 2,2 kw (3 HP) - 2800 RPM; Automatic downfeed grinding head with automatic stop at preset height. Carriage run guides covered with replaceable hardened steel guides; 90 rotating knife-magnetic chuck; Coolant pump; * In some cases, the photos do not match the model proposed 2
PX1000 Mini-PLC controlling automatic downfeed, sparkout and downfeed right or left and right Heavy duty grinding motor 2,2 k W (3 HP); 90 rotating magnetic chuck; Variable carriage speed 2-18 m/min; External tank with coolant pump; Switch for carriage run adjustment. BMX 650 Rotating mechanical chuck with T-slot 0 reference marker for mechanical chuck Variable carriage speed 1-11m/min Carriage run reduction switch External coolant tank with pump Minimum downfeed of the grinding wheel 0,01mm Basement BM850 Basement; Automatic downfeed grinding head with automatic stop at preset height. Carriage run guides covered with replaceable hardened steel guides; 90 rotating knife-magnetic chuck; Coolant pump; Blade straightening machine RDM Blade feed by motorised rollers ; Work-piece end sensor; Pressure gauge; Blade support roller with height adjustment. 3
PX1350 Mini-PLC controlling automatic downfeed, sparkout and downfeed right or left and right Grinding motor 3,7 kw (5 HP); 90 rotating magnetic chuck; Variable carriage speed 2-18 m/min; External tank with coolant pump; Switch for carriage run adjustment. Af2000 Grinding wheel motor 4kW (5Hp) grinding wheel Ø178mm Magnetic chuck 2000x120mm Automatic downfeed Variable carriage speed External tank with pump * In some cases, the photos do not match the model proposed 4
Tel.: +39-0522-632266 - Fax: +39-0522-642011 mvmsrl@mvmsrl.it www.mvmsrl.it July 2016 C.F. 00154090369 - P. IVA 01858720350 AUTOMATIC KNIFE LOADER AUTOMATIC LOADER FOR 10 KNIVES UP TO 1500 mm Loading of blades on the automatic loader and the entering of program number and the blade length Start-up cycle: The carriage positions itself at a default position with respect to the zero point of the machine The loader places the blade on the magnetic chuck Magnetic chuck magnetizes Rotation of chuck to -35 Demagnetization of chuck followed by alignment the blade by pneumatic actuator Actuator moves back and the chuck magnetizes Rotation of chuck to the angle set in the desired program Start grinding wheel, coolant pump and carriage movement Fast approach of the grinding wheel to the blade followed by slow descent When the grinding wheel touches the work-piece the automatic working cycle for roughing, finishing and spark-out begins At the end of the automatic cycle the carriage stops at the right inversion point The chuck rotates to zero degrees and demagnetizes A blade washing cycles follows between the two inversions points At the end the grinding wheel moves to the zero position point and the carriage moves to the cycle start point Demagnetization of the chuck Blade is unloaded Rotation of chuck to -10 Washing and drying cycle along length of chuck Afterwards the carriage moves to the working cycle starting point The magnetic chuck returns to zero degrees Begin a new working cycle LIST PRICE: 79.500,00 SPECIAL PRICE: 40.000,00 GRINDERS AND SHARPENERS FOR BLADES AND KNIVES Pag. 1 di 1 MVM Srl 42015 Correggio (RE ) ITALY- Via del Progresso, 14 Tel. (+ 39) 0522 632266 Fax (+ 39) 0522 642011 Email: mvmsrl@mvmsrl.it - Web site: www.mvmsrl.it