SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

Size: px

Start display at page:

Download "SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry."

Dominick Fowler
7 years ago
Views:

1 SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

2 SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION STONE INDUSTRY. IT IS CAPABLE OF DRILLING STRAIGHT, VERTICAL AND HORIZONTAL HOLES THAT ENABLE WIRE CUTTING. Tramming, rotation and feed is activated by an on-board engine and a well-matched external compressor runs the down-the-hole hammer. SpeedROC D0 s special design makes it capable of drilling horizontal holes with minimum ground clearance from both right and left directions. MAIN BENEFITS Tailor-made for the dimension stone industry Drills straighter holes Low positioning time and low fuel consumption Capable of drilling holes just 8 cm from the ground to the center of the hole

Tramming, rotation and feed is activated by an on-board engine and a well-matched external compressor runs the down-the-hole hammer.

3 REDEFINE YOUR DRILLING WITH SPEEDROC D0 SPEEDROC D0 REDEFINES THE WAY YOU DRILL IN THE DIMENSION STONE QUARRIES FOR THE WIRE-SAW APPLICATION. IT IS CAPABLE OF DRILLING HORIZONTAL HOLES WITH A GROUND CLEARANCE OF JUST 8 CM FROM CENTER OF THE HOLE FOR BOTH RIGHT AND LEFT FEED DIRECTIONS. SpeedROC D0 redefines the way you drill in the dimension stone quarries for wire-saw application. + FLEXIBILITY TO DO MORE SpeedROC D0 is a self-propelled, 4-wheel driven rig, extremely stable while tramming. Thanks to the skid-steer mechanism, it negotiates some of the toughest quarry conditions with ease. It saves fuel and time as well, you no more need to waste time in towing or transporting the traditional pneumatic drills to the drilling site. + SIMPLICITY AT WORK The machine comes with a swing control panel for drilling and boom movements. As an option, it can be equipped with an easy to handle rod rack that holds 0 rods, each up to m in length. All the drilling controls are well within reach and are simple yet effective for drilling cleaner and accurate holes. TECHNICAL SPECIFICATIONS MAIN COMPONENTS 4 cylinder, 6. kw Kubota engine Dust collector Double tramming station: Radio remote control (RRC) or on-board control Customized rotation unit designed for DSI application Swing arm control panel (drilling and boom functions) 4 hydraulic legs to stabilize the rig during positioning and drilling ENGINE Kubota V505 Power rating at 000 rpm 6. kw 5.HP Chain feed system Gull wing canopy doors emergency wire stops on the feed Tramming lights Hydraulic system with LS pump for lower fuel consumption HOLE RANGE Recommended DTH hammers and hole range COP 0, COP, COP Drill pipe Diameter 6 mm, 76 mm Length.5 or m 4.9 or 6.6 ft HYDRAULIC SYSTEM Ambient temperature 0 C / + 45 C 4.8 F / + F Pumps Pistons vriable displ with LS control 45 cc Gear pump 8 cc CARRIER Tramming speed, max 5 km/h.0 mph Tramming angles downward/upward max 5 cannot be Tramming angles laterally, max (left, right) 0 combined Ground clearance 0 mm 0,75 ft FEED Chain feed, hydraulically driven Feed extension 00 mm 4 ft Feed force, max 0 kn 48 lbf Tractive pull, max 0 kn 48 lbf Total length 50 mm.5 ft Travel length 50 mm 7 ft + SAFER OPERATIONS The SpeedROC D0 boasts of a number of safety features. Four support legs, dual emergency stop wires and safety handle grabs are some of the features that ensures safer working conditions. The machine also comes with a Radio Remote Control (RRC) as a standard feature, to make the work simpler and safer. ELECTRICAL SYSTEM Voltage Batteries Alternator Sound alarm and flash light Tramming lights, front Tramming lights, rear V x V V Yes x 55 W x 55 W DUST COLLECTOR Filtering area 6 m 65 sq.ft Suction capacity 800 m /h 47 cfm Number of filters Suction hose diam 00 mm 0. ft Auto-cleaning filters ATLAS COPCO SERVICE Even the best equipment requires regular service to ensure optimal performance. Atlas Copco provides service solutions to safeguard an optimized relationship between productivity, availability and operational cost. Atlas Copco Mining and Rock Excavation Technique has over 00 technicians located in over 80 countries. By combining the usage of Atlas Copco genuine parts with service provided by a certified Atlas Copco technician, you ll have a winning combination no matter of where in the world you operate. CONTROL SYSTEM Electronically controlled Radio Remote Control (RRC) Drilling low start concerning feed, rotation and percussion DRILLING UNIT Oil pre-heating system Oil cooling system Proportional control hydraulic valves 0 micron absolute filtration rate VOLUMES Hydraulic oil tank 50 l. US gal Hydraulic oil, total 70 l 8.5 US gal Lubrication tank.4 l 0.6 US gal Diesel engine oil 6 l.5 US gal Diesel tank 45 l US gal 4 5

SpeedROC D0 redefines the way you drill in the dimension stone quarries for wire-saw application.

4 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS SpeedROC D0 Swing control panel for drilling and boom movements. Integrated dust collector reduces burden. Self propelled, 4-wheel driven rig, extremely stable while tramming. 0 5mm 80 mm R mm R mm SPEEDROC Stabilizer legs provides greater stability in challenging terrains. 0 Horizontal reach - vertical drilling (mm) 0 Vertical reach - horizontal drilling (mm) COMPRESSOR RECOMMENDATION COP 0 Operating pressure Air consumption XAZ 57Dd 7 bar 50 l/s XATS 56 0 bar 66 l/s XAHS 07 bar 06 l/s COP 5 Operating pressure Air consumption XAS 77Dd 7 bar 7 l/s XATS 56 0 bar 66 l/s XAHS 07 bar 06 l/s XAVS 66 4 bar 58 l/s SPEEDROC EXTERNAL AIR REQUIREMENT Air requirement is dependent on the air pressure and hammer size used. Please consult your local Atlas Copco representative for selection of the right compressor. Max working pressure: 4 bars. 65 Horizontal drilling clearance from the ground is 8 cm from centre of drilling HEIGHT AND LENGTH Feed tilt angle Feed swing angle Height (H) 00 mm 7 Length (L) mm 6 Width (W) 950 mm 6 4 {H} WEIGHT Standard unit excluding all options and drill steel 00 kg 6 84 lb {L} + / mm 80 mm Vertical reach Horizontal reach OPTIONAL EQUIPMENT {W} Rod rack 0 rods.5 or m long Can be positioned on either side of the machine 6 7

0 Horizontal reach - vertical drilling (mm) 0 Vertical reach - horizontal drilling (mm) COMPRESSOR RECOMMENDATION COP 0 Operating pressure Air consumption XAZ 57Dd 7 bar 50 l/s XATS 56 0 bar 66 l/s

5 a Örebro, Sweden. Legal Notice Copyright 05, Atlas Copco Rock Drills AB, Örebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. COMMITTED TO SUSTAINABLE PRODUCTIVITY We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustainable Productivity.

No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice.

Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 )

Atlas Copco Surface drill rigs SmartROC T35/ T40 Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) When smart means easy and efficient Main benefits Combines low fuel