Presentation of. factory at Segmon, Grums municipal.
|
|
- Neil Sherman
- 7 years ago
- Views:
Transcription
1 Presentation of factory at Segmon, Grums municipal.
2 Office building
3 Office building
4 Office building
5 Storehouse
6 Space for annex
7 Preparatory work with plinths for the extension of sheet metal building by 42 x 42 m.
8 Garage and storehouse
9 Garage and storehouse
10 Planning 10
11 Planning 11
12 Boiler room 12
13 Boiler room 13
14 Various storage rooms 14
15 Planning 15
16 Various equipment in garage and storehouse. 16
17 Various equipment in garage and storehouse. 17
18 Various equipment in garage and storehouse. 18
19 Various equipment in garage and storehouse. 19
20 Various equipment in garage and storehouse. 20
21 Wheel loader Volvo 4400 in garage Volvo 4400 with scale equipment 21
22 Various fittings 22
23 Wheel loader Lundberg 23
24 Various machine equipment 24
25 Transformer station volt 25
26 Production hall and storage 44x88 m 26
27 Production hall 27
28 Outgoing conveying belt for possible silo equipment 28
29 Production hall 29
30 Storehouse and reception hall whith reinforced sides 30
31 Storehouse Oil tank 50 m 3 31
32 This building includes a silo fore the dust firing with feeding-out equipment 32
33 Hopper with dosing feeder 33
34 Steel flaps for closing of storehouse 34
35 Truck scale 35
36 Burner for wood dust. Stared on LP-gas and oil. 36
37 Combustion chamber/pre-heat oven with ovenproof material 37
38 The one-way drum of Van den Broek 38
39 Outgoing pipes with stone filled drain 39
40 Maijer-mill grinder for fine decomposition 40
41 Fan room and fan 41
42 Sluice feeder 42
43 Cyclone for material to the intermediate storing 43
44 Intermediate storing 44
45 Various pipe systems for material 45
46 Pellet cooler and elevator for outgoing pellets 46
47 Outgoing conveying belt for pellets 47
48 Pellet cooler Overall view 48
49 Fine mill grinder for dust firing 49
50 Pellet press CPM 1,5 ton 50
51 Pelletspress CPM 4 ton run for approx 200 hours only 51
52 Pellet press CPM 2,5 ton 52
53 Electrictricity and control equipment 53
54 Flow chart 54
55 Flow chart Overall view from the control cabin 55
56 Control system in the control cabin 56
57 Controlcabin and staff room 57
58 Container whith electrical equipment and the control cabin 58
59 Cabling in the container with el. Equipment. 59
60 Electrical equipment in the container 60
61 Container in the work shop 61
62 Container in the work shop 62
63 Room for the installation of water-and air pressure 63
64 Fire extingguishing apparatus of water, air and firefly 64
65 Cleansing machine Container for wastage Electric power station for the drying oven and fans in case power drop out. 65
66 Unloading conveyor of loose pallets 66
67 Equipment for the production of small sacks Equipment for the filling of big sacks 67
68 Production of small sacks 68
69 Production of small sacks 69
70 outgoing roller table for pallets of small sacks Lifting hook for big sacks 70
71 Control equipment for the production of small sacks 71
72 Pallet rotating table 72
73 Container for wastage 73
74 Staff room for the production area of small sacks. 74
75 75 V-pellets pelletsfactory Grums County, Värmland, Sweden
76 76
77 77 V-pellets pelletsfactory Grums County, Värmland, Sweden
78 Machinery register of the pellet factory Belt conveyor, reception hopper Dryer: distributor reception hopper Conveyor belt, reception hopper Worm conveyor for drum dryer Drum dryer Main cyclone Sluice head cyclone Fan cyclone 1 Sluice cyclone 1 Sluice cyclone 2 Sluice cyclone 3 Worm conveyor for cyclones 1-3 Hammer mill Worm screw for elevator Elevator for buffer pocket Buffer pocket high/low Scraper conveyor for the presses Worm screw for dust mill Press 1 CPM Main engine 160 kw Cascade mixer Feeding screw Oil lubrication Grease lubrication Press 2 CPM Main engine 250 kw Cascade mixer Feeding screw, frequency converted Oil lubrication Feeding screw Press 3 CPM Main engine 250 kw Cascade mixer Feeding screw Oil lubrication Oil cooler Grease lubrication Conveyor for warm pellets Belt conveyor to the refrigerator Pellet refrigerator, outflow Fan for the pellet refrigerator Fan for the suction Elevator Belt conveyor Belt conveyor Dust burner Dust mill Combustion air fan Conveyor fan Conveyor fan Silo filter Filter fan Screw for dust silo Driving motor for dust silo Oil pump Dosing screw Sluice feeder Transformer station and switch gear Equipment for packing of small and big sacks Bulk carrier Truck scale, in ground Wheel loader incl. Scale Volvo BM Wheel loader Lundberg Miscellaneous sundries For wheel loader 4400 Fittings: High tilting shovel Pallet fork Filling chute for big bags Snow blade For Valmet 343 Fittings: Filling chute for big bags High tilting shovel Cleansing machine Farm tank 1500 litres Power station, run by diesel Cleansing machine, run by battery MIG welder Electric welder Gas welder Hydraulic press for exchange of bearing Spare parts - matrix etc. for plant equipment Workshop equipment Office equipment
79 V-PELLETS AB Kyrkbyns Industriområde SE Segmon Sweden Phone +46 (0) Fax +46 (0) Cell phone +46 (0)
Batching and Mixing Plants
Batching and Mixing Plants Technique Strength Results Ready-mix plant with sheeted, square steel in-line bins. Precast and pipe factory with concrete in-line bins and bucket elevator. Individual solutions
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationFOR SALE: RECYCLING PLANT FOR. - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO. Single shaft shredder
FOR SALE: RECYCLING PLANT FOR - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO Single shaft shredder Stationary, weight 40 ton Table of content Sale of BANO PREMAC
More informationCNC MILLING MACHINE TROUBLE SHOOTING. 1. Trouble Shooting. No Trouble Solution. 1.Check the air pressure
CNC MILLING MACHINE TROUBLE SHOOTING 1. Trouble Shooting No Trouble Solution 1 Tool magazine( (Umbrella type) Noise for tool changing Can t change the tool Tool number in chaos Tool magazine keep rotation
More informationI BAU HAMBURG Dry Product Handling
IBAU HAMBURG Your efficient partner for modern and effective bulk material handling I BAU HAMBURG PLANT DESIGN - ENGINEERING - EPC-CONTRACTING CEMENT - THERMAL POWER - MINERALS Central Cone Silos Single
More informationPreventative Maintenance For Feed Processing Facilities and. Equipment
MF-2041 1 Feed Manufacturing The goal of onfarm feed manufacturing is to produce feed that meets the intended specifications, both in nutritional composition and desired medication level, and is free of
More informationFarmowners Equipment Breakdown Coverage. Frequently Asked Questions
Farmowners Equipment Breakdown Coverage Frequently Asked Questions Coverage Related Questions This section of frequently asked questions is dedicated to addressing the type of coverage received with equipment
More informationBIOPOWER 5 CEX. 1 Wärtsilä 10 January 2012 Presentation name / Author
BIOPOWER 5 CEX 1 Wärtsilä 10 January 2012 Presentation name / Author GENERAL INFORMATION ELECTRICAL OUTPUT 4.3 5.5 MWe HEAT OUTPUT Up to 10 MWth (16 t/h steam 1,3 bara) FUEL TYPE Wood chips, bark, saw
More informationCOIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se
COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of
More informationSustainable Resource Management Ltd
6.0 Predicted nvironmental Impacts 6. Stages and Impacts Considered An nvironmental Impact Analysis has been carried out whereby all the possible environmental, socio economic and health & safety aspects
More informationFree Examples of plant layout drawing
Free layout examples; a wide variety of industrial layouts, within different facility types. Principles of plant layout and design will apply widely. Free Examples of plant layout drawing Principles of
More information1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
More informationEquipment and Coverage Guide
Equipment and Coverage Guide AN INFORMATIVE GUIDE TO EQUIPMENT BREAKDOWN INSURANCE Key equipment Boilers and fired pressure vessels Unfired vessels (hot water tanks, air tanks, cookers, process vessels)
More informationEfficiency on a large scale CFB Steam Boilers
Efficiency on a large scale CFB Steam Boilers Circulating Fluidized Bed Steam Boiler The Circulating Fluidized Bed Steam Boiler is an offering from Bosch Thermotechnology a member of the worldwide Bosch
More informationEnergy checks in Sweden a study of 10 small and mediumsized enterprises
Energy checks in Sweden a study of 10 small and mediumsized enterprises Mikael Söderström Rosén Senior energy consultant at KanEnergi Sweden AB Specialties are energy efficiency in industry and buildings,
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More informationHUDSON BREAD New York
HUDSON BREAD New York Right in the centre of New York Metropolitan, you find the Hudson Bread bakery. Perfect dough makes perfect bread! Based on this maxim, the new bakery has been erected in 2006 with
More informationASPHALT PLANT, NOMINAL PRODUCTION OF 160 T/H, IN
ASPHALT PLANT, NOMINAL PRODUCTION OF 160 T/H, IN Equipments are designed to reach the nominal production based in the following standard : - 3% aggregate moisture ; - sea level operation ; - aggregate
More informationAUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or
More informationCITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER This information is being given to you to describe potential opportunities as a Helper. The career ladders that Helpers
More informationCPS-3 Pallet Jack Scale
CPS-3 Pallet Jack Scale Operator Manual Thank you for purchasing the CAS CPS-3 Pallet Jack Scale. For your safety and correct operation of the scale, please read these instructions carefully before using
More informationPellet Process - Uses and Exposures
Pellet Process - Uses and Exposures 1 PROCESS - MANUFACTURING & USES 1 1.1 Manufacturing of pellets 2 Pellets are formed from the raw materials fine ores and additives of < 0.05 mm - into 9-16 mm spheres
More informationKobelco Extended Warranty Program. www.kobelco-europe.com
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
More informationPUMP MAINTENANCE SCHEDULE AND CHECKLISTS
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit
More informationUp-to-Date with Electrical Equipment
Figure 1. Parts of production lines 2 & 3. Viktor Stieger, ABB Switzerland Ltd, provides details on Qassim Cement Company s electrical upgrades. Up-to-Date with Electrical Equipment Introduction Qassim
More informationINDUSTRIAL PLANTS, COMPUTER & MACHINERY Manufacturing & Trade Co.Ltd.
INDUSTRIAL PLANTS, COMPUTER & MACHINERY Manufacturing & Trade Co.Ltd. Reference list: 2013 1 1. CNL Cimento Nacional LDA Maputo - Mozambik Project Definition : Capacity increasing the existing plant as
More informationCOMITÉ EUROPÉEN DES ASSURANCES
COMITÉ EUROPÉEN DES ASSURANCES SECRETARIAT GENERAL 3bis, rue de la Chaussée d'antin F 75009 Paris Tél. : +33 1 44 83 11 73 Fax : +33 1 44 83 11 85 Web : cea.assur.org DELEGATION A BRUXELLES Square de Meeûs,
More informationFEMA's SCHEDULE OF EQUIPMENT RATES
DEPARTMENT OF HOMELAND SECURITY FEDERAL EMERGENCY MANAGEMENT AGENCY RECOVERY DIRECTORATE PUBLIC ASSISTANCE DIVISION WASHINGTON, D.C. 20472 The rates on this Schedule of Rates are for applicant-owned equipment
More informationAGJ APRÍTÓGÉPGYÁR Kft.
1 AGJ APRÍTÓGÉPGYÁR Kft. Headquarters: H 5100 Jászberény, Honvéd u.27. Location: H 5100 Jászberény, Sportpálya u.1. Postal address: H 5101 Jászberény, PF.: 44 Tel.: +36 57 515 355, Fax: +36 57 515 356
More informationCONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS.
CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS BEUMER paketpac BEUMER paketpac flat film method Palletless packaging according to
More informationPROJECT CONSULTING MAIZE DRYING (CORNCOB) GRAIN DRYING (SEED) SEED PROCESSING SEED SIZING CLEANING COATING PACKING STORAGE AND TRANSPORT SYSTEMS
Value of seed industry... PROJECT CONSULTING MAIZE DRYING (CORNCOB) GRAIN DRYING (SEED) SEED PROCESSING SEED SIZING CLEANING COATING PACKING STORAGE AND TRANSPORT SYSTEMS TURN KEY SEED FACTORIES www.httarim.com
More informationOn request of Akzo Nobel Dynamo Project Team we ve surveyed the energy efficiency of the compressed air system in the Barcelona Deco & A/AS plant.
Postbus 9058 6070 AB Swalmen (NL) Akzo Nobel Car Refinishes S.L./Coatings S.L. Att. Mr. Cesar Franch Tel. +31(0)77-7676276 Fax +31(0)77-7676286 e.mail info@ants-tech.nl website www.ants-tech.nl cesar.franch@akzonobel.com
More informationI BAU HAMBURG. Information. Shipunloaders, Road- or Port-Mobile
I BAU HAMBURG Information Shipunloaders, Road- or Port-Mobile Shipunloaders in general Highly efficient shipunloading technology capacity in t/h uncontrolled capacity in t/h controlled When IBAU HAMBURG
More informationIron Ore Processing for the Blast Furnace (Courtesy of the National Steel Pellet Company)
Iron Ore Processing for the Blast Furnace (Courtesy of the National Steel Pellet Company) The following describes operations at the National Steel Pellet Company, an iron ore mining and processing facility
More informationFactory owners must ensure the boiler is:
Factory owners must ensure the boiler is: * Registered with the Boilers and Pressure Vessels Division, Labour Department * Examined by an appointed examiner and has a valid certificate of fitness * Supervised
More informationAfter close to 50 years working with an unloading
NEUERO Continuous Ship Unloader for Feed Mill TOMAS KISSLINGER, NEUERO Industrietechnik, Germany A BSTRACT After close to 50 years working with an unloading system, a new system which would serve today
More informationCONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS
CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS High capacity chain bucket elevators BEUMER CONVEYING TECHNOLOGY Bucket elevators
More informationA Review on Power Generation in Thermal Power Plant for Maximum Efficiency
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 4, Number 1 (2014), pp. 1-8 Research India Publications http://www.ripublication.com/ijame.htm A Review on Power Generation
More informationPolishing and finishing barrels BTV
Polishing and finishing barrels BTV Polishing barrels for buttons, products in polyester, urea, galalith and related item. Strengthened model with rubber lining for finishing of metallic minuteness. Steel
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationModel No. 4 Vertical Mixer 9 Screw Feeder Inlet 69196-H15400, May 1999 (#72-200-60-12)
The Model Number 4 Kelly Duplex Vertical Mixer has a gross vessel capacity of 200 cubic feet and a nominal batch working capacity of 170 cubic feet. This mixer features a 60 degree cone, a 12 inch diameter
More informationStudy tour in two cement plants, Enci and Lixhe and one sewage sludge treatment plant, Waterschapsbedrijf Limburg
Study tour in two cement plants, Enci and Lixhe and one sewage sludge treatment plant, Waterschapsbedrijf Limburg The ALF-CEMIND study tour was held in the borders of Belgium and the Netherlands on the
More informationBatch Plant and Central Mixer Operations Manual
Batch Plant and Central Mixer Operations Manual SOLID PRODUCTS SOLID PERFORMANCE CON-E-CO 237 N. 13 th Street Blair, NE 68008 402.426.4181 FOR PARTS CALL 1-800-656-2651 OR www.con-e-co.com CON-E-CO, the
More informationVZ/VZM SERIES Heavy Duty Shredders 600-2,100 kg/h
VZ/VZM SERIES Heavy Duty Shredders 600-2,100 kg/h Technical Specifications VZ/VZM SERIES Heavy Duty Shredders VZ 17.00 / VZ 18.00 Inline set-up VZM 17.00 / VZM 18.00 Inline set-up Technical Data VZ/VZM
More informationCart Lifts - Models Tilts, Lift & Rotates, Lift & Tilts
Industrial Product Guide Cart Lifts - Models Tilts, Lift & Rotates, Lift & Tilts Position the dunnage carts for the associates by lifting, lifting & rotating, tilting, or lifting & tilting the dunnage.
More informationRauhalahti Biomass CHP Plant
Rauhalahti Biomass CHP Plant Jyväskylän Energiantuotanto Oy, a heat production company owned by Fortum Heat and Power (%) and the City of Jyväskylä (40%), owns in all 29 boilers. Two of these are power
More informationHeating with wood chips and pellets
YOUR RELIABLE PARTNER Heating with wood chips and pellets Present on the market 110 for over years 90-150 Advantages of the HERZ firematic boiler User friendly with: Easy operation Automatic cleaning system
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationFederal Wage System Job Grading Standard for Heating and Boiler Plant Equipment Mechanic, 5309. Table of Contents
Federal Wage System Job Grading Standard for Heating and Boiler Plant Equipment Mechanic, 5309 Table of Contents WORK COVERED... 2 WORK NOT COVERED...2 TITLES... 2 GRADE LEVELS... 3 HELPER AND INTERMEDIATE
More informationREGISTRATION OF INTEREST
A B C Adhesives and Sealants Advertising Air Cargo Transport Air Conditioners Air Conditioning Installation or Maintenance or Repair Services Air Filters Ambulance Services Arborist Services Architectural
More informationEXTRUDER FEEDING SYSTEMS
EXTRUDER FEEDING SYSTEMS www.kreyenborg-pt.com www.kreyenborg-group.com KREYENBORG GROUP BEST TECHNOLOGY INSIDE! The KREYENBORG GROUP is comprised of the following companies: KREYENBORG GmbH, BKG Bruckmann
More informationAviva Insurance Limited
One Park Place, Hatch Street, Dublin 2 Registration number: 9002 is accredited by the Irish National Board (INAB) to undertake inspection as detailed in the Schedule bearing the above registration number,
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationFederal Wage System Job Grading Standard For Mobile Equipment Servicing, 5806. Table of Contents
Federal Wage System Job Grading Standard For Mobile Equipment Servicing, 5806 Table of Contents WORK COVERED... 2 WORK NOT COVERED...2 TITLES... 2 GRADE LEVELS... 2 MOBILE EQUIPMENT SERVICES, GRADE-1...
More informationBEST PRACTICES TOWARDS ENERGY EFFECIENCY. UltraTech Cement Limited. (Unit -Kotputli Cement Works)
BEST PRACTICES TOWARDS ENERGY EFFECIENCY UltraTech Cement Limited. (Unit -Kotputli Cement Works) Best Practices towards Energy Efficiency 1. Selected Vertical Mills installed at Raw Mill, Cement Mills
More informationINFORMATION BROCHURE
OHS 3/1/4/6 DEPARTMENT OF LABOUR OCCUPATIONAL HEALTH AND SAFETY ACT, 1993 EXAMINATIONS FOR THE MECHANICAL AND ELECTRICAL ENGINEERS CERTIFICATES OF COMPETENCY (FACTORIES) Revised January 2007 1. INTRODUCTION
More informationVeenstra Group Your Partner
Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance Off Shore Valves & Parts General Information Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance
More informationPE1 Pellet. PE1 Pellet. Pellet boiler. PE1 Pellet. www.froeling.com
PE1 Pellet PE1 Pellet Pellet boiler PE1 Pellet www.froeling.com 1 Heating with pellets For more than 50 years Froling has specialised in the efficient use of wood as a source of energy. Today the name
More informationOptimize Your Process
Optimize Your Process Instrument Solutions for the Coal Mining Industry Part of Thermo Fisher Scientific The Power to Help You Profit Optimizing Performance with Online Elemental Analysis Every year 1.1
More informationGeneral Dimensions and Weights - Non Loader
Home > Equipment > Tub Grinders > TG5000 TG5000 Specs General Dimensions and Weights - Non Loader Maximum Length - Transport 39.2' 12 m Maximum Length - Conveyor Unfolded 61.1' 18.6 m Maximum Width (Transport)
More informationFind job and training opportunities at SteadyGrowth.ca
3 4 Find job and training opportunities at SteadyGrowth.ca 5 6 7 8 9 10 11 12 13 14 Manitoba Trades What you do Program Entry Requirements Years to Complete Program Where the Jobs are Minimum Wages Apprentice
More informationSolutions for handling raw materials. Food Industry
Solutions for handling raw materials CASE STUDY MINCED MEAT LINE Core targets of the project Mixing, storage and feeding of packing lines The main focus was a flexible line with a much higher production
More informationall VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101
ergonomic FORKLIFT vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production.
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationCurrent state of plant Functioning as a peak and emergency centre. Statistics Accumulated operating hours:
Current state of plant Functioning as a peak and emergency centre Statistics Accumulated operating hours: D1-2-3-6-7: 43000 to 48000 hrs D4-5: 53000 to 57000 hrs D8: 33000 hrs Layout of the plant Index:
More informationwww.universityquestions.in
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT: ME6701-POWER PLANT ENGINEERING YEAR/SEM: III/V UNIT-I COAL BASED THERMAL POWER PLANTS 1. What are the processes of rankine cycle?
More informationMEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM. Key features: NOVAIR quality and service: www.novairmedical.com
MEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM Designed for centralized medical air production in hospitals and clinics, NOVAIR medical air stations ensure the continuous supply of the medical gas
More informationCompressed Gas Cylinder Program
Department of Environmental Health & Safety Procedures Compressed Gas Cylinder Program March 2010 Compressed Gas Cylinder Program Page 1 of 8 Table of Contents I. Introduction II. III. IV. Policy Scope
More informationTopics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
More informationSPARE PARTS SKIOLD FEED MILLING PROGRAMME
SPARE PARTS SKIOLD FEED MILLING PROGRAMME ONLY ORIGINAL SPARE PARTS ARE ALLOWED IF MORE THAN ONE PIECE OF A PART IS NEEDED IN THE MACHINE, THE NECESSARY QUANTITY IS INDICATED BY THE FIGURE IN BRACKETS
More informationRange Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
More informationINVESTMENT RECOVERY SERVICES
INVESTMENT RECOVERY SERVICES Late Model Roll Form Facility Mar 22, 2016 10am CST 3570 Shelby Rd Denton Texas 76207 United States Lot Description 1 TOOL BOX W/ TOOLS 2 MINI BAUTE MAGNETIC DRILL MDL: RB32
More informationGuidelines for Preparing for a Temporary Steam Plant
Guidelines for Preparing for a Temporary Steam Plant Trailer-Mounted Boilers Skid Mounted Boilers Mobile Boiler Rooms Mobile Feedwater Vans Mobile Steam Plants Emergency Preparedness Plan Table of Contents
More informationFocus on learning key. 1 NIHL impacts. Exercise. Discuss. Introduction
Focus on learning key Exercise Analyse the information in your work group Date: Shift: Discussion led by: Attendees names: Discuss Go through questions in your workgroup Introduction Being exposed to excessive
More informationFirst Aid Kit The Expert in Lubrication Solutions
Prevent Workplace Accidents! First Aid Kit The Expert in Lubrication Solutions Safety - it s in your hands! Stop unsafe acts before they stop you *About 20% of all accidents are maintenance related: falls
More informationDEPARTMENT OF HEALTH.
DEPARTMENT OF HEALTH. OCCUPATIONAL HEALTH AND SAFETY, 1993 EXAMINATIONS FOR THE AND ENGINEERS CERTIFICATES OF COMPETENCY 1. INTRODUCTION 1.1 The following instructions, rules and syllabi or the examinations
More informationVolvo articulated haulers SPECIAL APPLICATION SOLUTIONS
Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS Attach and go. Handle your workload with Volvo s hauler chassis designed for ultimate performance, flexibility and versatility. This machine is the
More informationFARM DISPERSAL SALE. SATURDAY 23 rd JULY 2016 10:30am. ON BEHALF OF C Hayhurst. AT Elmridge Farm Chipping PR3 2NY
FARM DISPERSAL SALE SATURDAY 23 rd JULY 2016 10:30am ON BEHALF OF C Hayhurst AT Elmridge Farm Chipping PR3 2NY CLITHEROE AUCTION MART, LINCOLN WAY, CLITHEROE, BB7 1QD 01200 423325 Conditions of Sale All
More informationRESIDENTIAL HEATING OIL SERVICE CONTRACT ANNUAL COST $276.00
RESIDENTIAL HEATING OIL SERVICE CONTRACT This service contract covers all routine service and maintenance of your residential oil fired furnace or boiler. In addition this contract covers all service calls
More informationPOLYCITY. Technical measures and experiences at a 6 MW cogeneration plant with wood chip furnace POLYCITY
Technical measures and experiences at a 6 MW cogeneration plant with wood chip furnace Content 1. Technical overview cogeneration plant and heating network 2. Investment of the facility 3. Experiences
More information62 Lembo 2-Ply Coater Laminator Embossing Line #1
62 Lembo 2-Ply Coater Laminator Embossing Line #1 Used 62 Lembo 2-Ply Coater Laminator Embossing Line, equipped with 30 maximum diameter 2- position unwind (drop splice, 3 chucks on 1.5 steel shafts, driven
More informationContainer design and types
Container technology can transport mainly piece goods over great distances. The strong container protects good during the transport, the standardized dimensions let them store in well defined stacks and
More informationHeating and air-conditioning industry
Heating and air-conditioning industry Innovative solutions for your success Dear Readers, We all prefer a nice warm room. As manufacturers of heating and air-conditioning systems, you know just how important
More informationWhy use Tigerloop in fuel heating systems?
The Original Oil De-aerator Why use Tigerloop in fuel heating systems? Reliability New products are continually being developed in the modern oil heating industry in order to satisfy new laws and regulations
More informationULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
More informationRotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
More informationCITY OF WASHINGTON SPILL PREVENTION, CONTROL AND COUNTERMEASURE PLAN
CITY OF WASHINGTON SPILL PREVENTION, CONTROL AND COUNTERMEASURE PLAN Adopted October 5, 2009 Table of Contents Chapter Description Page 1 Facility Descriptions... 3 1.1 Municipal Power Plant, 1001 Park
More informationWorkplace Incident Fatalities Accepted by the Workers Compensation Board in 2014
Workplace Incident Fatalities Accepted by the Workers Compensation Board in 2014 Workplace Incident Fatalities Year to date, numbers as of December 31, 2014 Workplace Incident fatalities are cases where
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
More informationHITACHI EXTENDED LIFE PROGRAM
HITACHI EXTENDED LIFE PROGRAM HITACHI EXTENDED LIFE PROGRAM Always with the Customer All new Hitachi equipment has our comprehensive manufacturer s warranty. These days however, equipment owners feel they
More informationEFFECT. DATE: 01/13/1991 SERIES PURPOSE: The purpose of the automotive mechanic occupation is to repair & maintain cars, trucks & equipment.
STATE OF OHIO (DAS) CLASSIFICATION SPECIFICATION CLASSIFICATION SERIES: Automotive Mechanic MAJOR AGENCIES: Attorney General only SERIES NO.: 5213AG EFFECT. DATE: SERIES PURPOSE: The purpose of the automotive
More informationENA Kraft, Enköping Sweden
THE ANALYSIS REPORT OF PLANT NO. 6 Cofiring of biomass - evaluation of fuel procurement and handling in selected existing plants and exchange of information (COFIRING) - Part 2 ENA Kraft, Enköping Sweden
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More information12 November 2008 *** I:\CIRC\MEPC\01\642.DOC INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR
INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: 020 7735 7611 Fax: 020 7587 3210 IMO E Ref. T5/1.01 MEPC.1/Circ.642 12 November 2008 2008 REVISED GUIDELINES FOR SYSTEMS
More informationSUSTAINABLE WEED MANAGEMENT WITH HOT WATER
SUSTAINABLE WEED MANAGEMENT WITH HOT WATER The environmentally friendly solution for effective weed management THERMAL WEED MANAGEMENT 02 SUSTAINABLE HOT WATER TECHNOLOGY 03 EXPERTS TO THE CORE For more
More informationheat treatment equipment & accessories
heat treatment equipment & accessories INDUSTRIAL FURNACES Dear Customer, ElectroHeat Sweden AB is an innovative company based in Gothenburg, Sweden, and has been operating since 1975. We manufacture industrial
More informationDrying of Woody Biomass. Process Engineering / GEA Barr-Rosin
Drying of Woody Biomass BioPro Expo & Marketplace / Atlanta, GA / March 14-16, 2011 Drying of Woody Biomass Conventional Direct Fired Dryer Technology Proprietary work of the Copyright Owner Issues with
More informationMechanical Installation
Page -1-1. INTRODUCTION AND PURPOSE 1.1. This specification covers the installation, testing and precommissioning of mechanical equipment. Work is to be performed in conjunction with the manufacturer s
More informationA Guide to Trouble-Free Cooling Towers
A Guide to Trouble-Free Cooling Towers A basic understanding of cooling tower operation and maintenance will help keep a cooling water system running in top condition, year after year By David M. Suptic
More information