OPTIMAG MIG/MAG welding equipment with OPTI system. Simplicity and productivity. 008-0 008-036 www.saf-fro.com
OPTIMAG range and opti system 1881-047 MIG/MAG welding equipment designed for heavy-duty quality work. Its 6 thyristors bridge provides a continuous stable arc adjustment, it is completed by a 4-rollers separated wire-feeder regulated by tachometer. Its OPTI system adjustment brings an extreme simplicity through a user-friendly interface and pre-adjusted programs. Simplicity of the adjustment of the OPTI system: OPTI system is a synergic mode that access to pre-recorded parameters and optimizes significantly the welding performances. Once the user sets: WELDING Gas and material Welding cycle Wire diameter 1 T/4T welding cycle 1 7 10 3 Crater filler cycle Gas selection 4 Solid or cored wire selection 6 8 11 Display for: current thickness wire speed 6 Display for voltage 3 4 9 7 8 9 Selection for the display Material selection Wire diameter selection 008-037 10 11 On and warning lamps On/off switch Increasing the productivity: Maximum power at 60 % duty cycle (40 C). Rapid access to the correct welding parameters. Complete welding cycle with Hot Start and crater filler. Optional water cooled configuration. Easy to use with fast parameter changes using the OPTI system. 0-00
66-011 Arc striking: Variable striking voltage Arc extinction system Anti balling system No need to cut the wire before restarting Ideal for maintenance and reparation applications. Arc stability: Continuous adjustment and regulation of the welding parameters A.N.D: Arc Non Disruption, eliminates disruption of the arc, for uniform melting with minimun spatters Optimisation: Welding performance Can be used with CO and mixed gas Optimum user safety: Detector for absence of a phase on the primary supply Configured: For automated applications Fan: Disconnectable 008-036 Separate wire feeder: 4 rollers, light, and compact (manhole) with fast wire feed Wire feeding regulation Air cooled and water cooled versions 00-381 Easy to maintain: No electronics in the wire feeder unit. Easy access to all internal parts. Simple electronic card for all fonctions. Autodiagnosis: a rapid check up verifies that the main components (fan,cooling unit,etc ) are working properly. Detector for the absence of a phase on the primary power supply. 3
Technical specifications 008-0 Primary Power supply - 3 phases Frequency OPTIMAG 400 S (W) OPTIMAG 400 S (W) MV OPTIMAG 00 S (W) 30 / 400 V 0 / 30 / 40 / 380 / 400 / 41 / 400 V 0-60 Hz 0 / 30 / 40 / 380 / 400 / 41 / 440 V Maximum primary consumption 1 / 9 A 3 / 1 / 48 / 31 / 9 / 8 / 6 A 81 / 78 / 74 / 47 / 4 / 43 / 41 A Secondary Open circuit voltage max. 48 V 48 V 61 V Adjustment range 0-400 A 0-400 A 40-0 A Duty cycle at 40 C General at 40 % 400 A 400 A - at 60 % 30 A 30 A 0 A at 100 % 70 A 70 A 370 A Standard EN 60974-1 / EN 60974-10 Protection index IP 3 Insulation class Air cooling Controlled fan Dimensions (H x W x D) with feeder 1 300 x 30 x 1 01 mm 1 300 x 30 x 1 01 mm 1 300 x 710 x 1 10 mm Weight 137 kg 143 kg 18 kg Wire feeder Welding wires Wire feed rate Steel, Stainless steel Flux-cored Aluminium H 0.8 to 1.6 mm 1.0 to.4 mm 1.0 to.4 mm 1 to 0 m/min. Numbers of rollers 4 Dimensions (H x W x D) Weight Cooler unit Power supply 1 phase Max. pressure Max. flow Dimensions (H x W x D) Weight 10 x 330 x 610 mm m 7 kg air - 9 kg water 10 m 34 kg air - 38 kg water 1 m 41 kg air - 47 kg water 30 V - 0/60 Hz 4 bars 4 l/min. 19 x 440 x 700 mm 19 kg 4
Ordering information Power source delivered with a primary cable m an earth cable m with clamp a gas hose 3 m 008-146 001-37 001-487 1806-073 114-04 1 3 4 Cat. no. 66-03 OPTIMAG 400 S (W) MV W 000 63 737 OPTIMAG 400 S (W) W 000 63 741 OPTIMAG 400 S pack* W 000 67 163 OPTIMAG 400 S W pack* W 000 67 164 OPTIMAG 00 S (W) W 000 63 773 OPTIMAG 00 S W pack* W 000 67 16 Cooling units COOLER II W 000 30 009 1 FREEZCOOL W 000 010 167 Wire feeder with harness The wire feeder is delivered with: rollers and wire guides for 1.0-1. mm for steel and stainless steel using wire feeder trolley with spool cover DV44i - D37 DV44i - D37 (W) Options * Power source + feeder + pressure regulator for French market. m W 000 68 844 10 m W 000 68 84 1 m W 000 68 846 m W 000 68 847 10 m W 000 68 848 1 m W 000 68 849 3 Remote control unit W 000 30 11 OPTIBOX 100 W 000 30 109 4 Pivot support W 000 30 010 Slinging arm W 000 30 061 Torches 3 m 4 m m PROMIG NG 341 W 000 34 066 W 000 34 067 W 000 34 068 PROMIG NG 341 W W 000 34 069 W 000 34 070 W 000 34 071 PROMIG NG 441 W 000 34 07 W 000 34 073 W 000 34 074 PROMIG NG 441 W W 000 34 07 W 000 34 076 W 000 34 077
Contacts BELGIUM AIR LIQUIDE WELDING BELGIUM SA Z.I. West Grijpen - Grijpenlaan - 3300 TIENEN Tel.: +3 16 80 48 0 - Fax: +3 16 78 9 CHINA SAF SHANGHAI REP. OFF. Rm. 7. Pine City Hotel 777 Zhao Jia Bang Lu - SHANGHAI 0003 Tel.: +86 1 64 43 89 69 - Fax: +86 1 64 43 8 97 CZECH REPUBLIC AIR LIQUIDE WELDING CZ S.R.O. Podnikatelská 6 - Areál SVUM 190 11 PRAHA 9 - Bûchovice Tel.: +40 74 03 163 - Fax: +40 74 03 33 FRANCE AIR LIQUIDE WELDING FRANCE 13, rue d Épluches - BP 7004 Saint-Ouen l'aumône 931 CERGY PONTOISE Cedex Tel.: +33 1 34 1 33 33 - Fax: +33 1 34 1 31 30 HUNGARY AIR LIQUIDE WELDING HUNGARY - Kft Krisztina krt. 39/b - H-1013 Budapest Tel.: +36 1 339 860 - Fax: +36 1 339 8649 ITALY AIR LIQUIDE WELDING ITALY Via Torricelli 1/A - 3713 VERONA Tel.: +39 04 8 91 11 - Fax: +39 04 8 91 36 LUXEMBOURG AIR LIQUIDE WELDING LUXEMBOURG S.A. rue de la Déportation - BP 138 - L-141 LUXEMBOURG Tel.: +3 48 4 6 - Fax: +3 48 4 7 MALAYSIA SAF-OERLIKON MALAYSIA SDN BHD No 10, Jalan TPP /1 - Taman Perindustrian Puchong 47100 PUCHONG, SELANGOR Tel.: +603 8060 8638 - Fax: +603 8061 60 NETHERLANDS AIR LIQUIDE WELDING NETHERLANDS Rudonk 6 B - NL 484 AJ BREDA Tel.: +31 76 41 00 80 - Fax: +31 76 41 8 96 POLAND AIR LIQUIDE WELDING POLSKA - SP. Z.o.o UL. Porcelanowa 10-40-46 KATOWICE Tel.: +48 3 609 04 0 - Fax: +48 3 609 04 60 PORTUGAL AIR LIQUIDE SOLDADURA LDA Rua Dr. António Loureiro Borges, 4- Arquiparque Miraflores - 149-131 ALGÉS Tel: +31 1 41 64 900 - Fax: +31 1 41 69 40 ROMANIA DUCTIL Aleea Industriilor Nr 1-104 BUZAU Tel.: +40 38 7 08 - Fax: +40 38 716 861 RUSSIA AIR LIQUIDE WELDING 17 Vorontsovskaya Str. - 109147 MOSCOW Tel.: +7 49 641 8 98 - Fax: +7 49 641 8 91 SLOVAKIA AIR LIQUIDE WELDING CENTRAL EUROPE S.R.O. Prazska 3-94901 NITRA Tel.: +41 37 69 4 601 - Fax: +41 37 6 19 919 THAILAND AIR LIQUIDE WELDING THAILAND Co Ltd 40 Moo 6 - Ramindra Road Km. 9. KHANNAYAO, BANGKOK 1030 Tel.: +66 9430 - Fax: +66 9436 U.A.E. AIR LIQUIDE WELDING MIDDLE EAST FZE Jebel Ali free zone warehouse No. FZS1AH0 P.O. BOX 18734 - Jebel Ali - DUBAI Tel.: +971(0)48861606 - Fax: +971(0)48861608 UKRAINE AIR LIQUIDE WELDING UKRAINE, Llc. 1 rue Proskura - bureau 106A - 61070 KHARKOV Tel.: +380 77 46 867 - Fax: +380 77 46 867 Air Liquide Welding France reserves the right to carry out modifications to its machinery without prior notice. The manufacturer accepts no liability for illustrations, descriptions and characteristics, which are for information only. Contacts for other countries ALW Export Department Italy Via Torricelli1/A 3713 Verona - Italy Tel: +39 04 8 91 11 Fax: +39 04 8 91 36 Email: export.alwitaly@airliquide.com ALW Export Department France 13, rue d'epluches BP 7004 Saint Ouen l'aumône 931 Cergy-Pontoise Cedex - France Tel: +33 1 34 1 33 33 - Fax: +33 1 30 37 19 73 Email: export.alwfrance@airliquide.com www.saf-fro.com www.airliquide.com Founded in 190, Air Liquide is the world leader in industrial and medical gases and related services. The company has offices in 7 countries and employs a work force of 40,000. Drawing on constantly renewed technologies, Air Liquide develops groundbreaking solutions used in making countless everyday products and in helping to preserve life. ALWF - W 000 70 773 - Compliant New Offer QB: 444-07 008 - S 0 - Ed. Photos: JSR