SUBHEAD-I: POINT WIRING & SUBMAIN WIRING 1.1 Wiring for light Point/ fan point/ exhaust fan point/ call bell point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed Steel conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Point 7277 1.2 Wiring for twin control light Point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed Steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Point 10 1.3 Wiring for submain wiring/ circuit wiring along with earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed Steel conduits as required. a) 2 x 2.5 Sq. mm + 1 x 2.5 Sq. mm earth wire. Mtrs. 23145 b) 2 x 4 Sq. mm + 1 x 4 Sq. mm earth wire. Mtrs. 13010 c) 2 x 6 Sq. mm + 1 x 6 Sq. mm earth wire. Mtrs. 200 d) 4 x 2.5 Sq. mm + 2 x 2.5 sq.mm earth wire Mtrs. 100 e) 4 x 4 Sq. mm + 2 x 4 sq.mm earth wire Mtrs. 4800 f) 4 x 6 Sq. mm + 2 x 6 sq.mm earth wire Mtrs. 200 g) 4 x 10 Sq. mm + 2 x 10sq.mm earth wire Mtrs. 250 h) 4 x 16 Sq. mm + 2 x 16sq.mm earth wire Mtrs. 200 1.4 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduits as required. Metre 1360 1.5 Supplying and fixing of following sizes of Steel conduit along with accessories in surface/ recess including cutting the wall and making good the samein case of recessed conduit as required. a) 25 mm Metre 1360 b) 32 mm Metre 100 c) 40 mm Metre 200 1.6 Supplying and fixing following modular switch/ socket on existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet Each 34 1.7 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 632 1.8 Supplying and fixing modular blanking plate on the existing modular plate switch box including connections but excluding modular plate etc. as required. Each 200 UNIT RATE Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
SUBHEAD-I: POINT WIRING & SUBMAIN WIRING 1.9 Supplying and fixing of metal box of GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connections, painting etc. as required. (For light plugs). Each 682 2.0 Supplying and fixing of metal box of GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps. modular switch, connections, painting etc. as required. (For power plugs). Each 768 2.1 Supplying and fixing of metal box of GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 3 Nos 3 pin 5/6 amps modular socket outlet and 15/16 amps. modular switch, connections, painting etc. as required. (For computer plugs). Each 657 2.2 Supplying and fixing of 3 pin, 5 Amp. ceiling rose on the existing junction box/ wooden block including connection etc. as required. (For power plugs). Each 143 2.3 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps. 'C'-series, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 90 2.4 Supplying and fixing 30 amps, 240 volts, TPN industrial type socket outlet, with 4 pole and earth metal enclosed plug top alongwith 30 amps. 'C'-series, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Each 117 TOTAL OF SUBHEAD I CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS UNIT RATE Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
SUBHEAD-II: FANS & FITTINGS Sl. No. DESCRIPTION OF ITEM UNIT QTY. Supplying, installation, testing and commissioning of the following luminaries mounting on surface / recess required for the internal wiring of the building along with suitable hangers and lamps. 1 Surface mounted Industrial Box type 4 X 14W T-5 fixtures with HF ballast (Philips Cat No. TPS 814/414 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 721 2 Recessed mounted in modular cielings with 4 X 14W T-5 fixtures with HF ballast (Philips Cat No. TBS 869/414 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 800 3 Recessed mounted low glare luminair with 3 X PL-L36W (Philips Cat No. FBS 300/336 P5 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 1134 4 Recessed mounted low glare luminair with 2 X PL-L36W (Philips Cat No. FBS 570/236 FNC D6 MM HPF/ Equivalent ) complete in everyway with accessories & lamps. Each 270 5 Recessed mounted downlighter 2 X PL-C 26W (Philips Cat No. FBH 225/226 ALR/ Equivalent ) complete in everyway with accessories & lamps. Each 55 6 Surface mounted rectangular luminaire with 2 X 28W T-5 fixtures with HF ballast (Philips Cat No. TPS 814/228 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 100 7 Recessed mounted rectangular luminaire with 2 X 28W T-5 fixtures with HF ballast(philips Cat No. TBS 869/228 D8 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 47 8 Industrial Batton suitable for 1 X 28W T-5 fixtures with HF ballast (Philips Cat No. TMS 122/128 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 10 9 Indoor decorative surface mounted suitable for 1 X 28W T-5 fixtures with HF ballast (Philips Cat No. TWG 128 / 2005 HF/ Equivalent ) complete in everyway with accessories & lamps. Each 93 10 Surface mounted suitable for 1 X PL-S 9 W fixtures with HF ballast (Philips Cat No. FCS 518/209 / Equivalent ) complete in everyway with accessories & lamps. Each 2 UNIT RATE In Fig. Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
SUBHEAD-II: FANS & FITTINGS Sl. No. DESCRIPTION OF ITEM UNIT QTY. 11 Wall recess step light luminaire die cast housing suitable for 2 X PL-C 18 W fixtures with HF ballast (Philips Cat No. DBP701/ 2x PLC18W/ Similar specifications of other approved makes) complete in everyway with accessories & lamps. Each 11 12 Surface mounted suitable for 2 X PL-S 18 W fixtures with HF ballast (Philips Cat No. FCS 518/218 / Equivalent ) complete in everyway with accessories & lamps. Each 734 13 Recessed down lighter suitable for 1 X PL-C 13W fixtures (Philips Cat No. FBH 145 /113 L / Equivalent ) complete in everyway with accessories & lamps. Each 184 14 Recessed down lighter suitable for 1 X PL-C 18W fixtures (Philips Cat No. FBH 145 /118 L / Equivalent ) complete in everyway with accessories & lamps. Each 2 15 Recessed down lighter suitable for 2 X PL-C 18W fixtures (Philips Cat No. FBH 145 /218 L/ Equivalent ) complete in everyway with accessories & lamps. Each 1000 16 Surface mounted down lighter suitable for 1 X 70W (Philips Cat No. MBS205 / 1 X 70W MHN-TD / Equivalent ) complete in everyway with accessories & lamps. Each 80 17 Scrabble with adjustable Lamp position 1X70W CDMT 3000 Deg.K (Havells Cat No. LHOH80150399 / Equivalent ) complete in everyway with accessories & lamps. Each 117 18 Scrabble with adjustable Lamp position 1X35W CDMT 3000 Deg.K (Havells Cat No. LHOH80150399 / Equivalent ) complete in everyway with accessories & lamps. Each 25 19 Scrabble with adjustable Lamp position 2X70W CDMT 3000 Deg.K (Havells Cat No. LHOH80250399 / Equivalent ) complete in everyway with accessories & lamps. Each 51 20 Decorative non-integral medium bay luminaire with prismatic diffusers suitable for 1 X CDM-TT 150W fixtures (Philips Cat No. HPK 205 /CDM- TT 150W PR / Equivalent ) complete in everyway with accessories & lamps. Each 302 UNIT RATE In Fig. Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
SUBHEAD-II: FANS & FITTINGS Sl. No. DESCRIPTION OF ITEM UNIT QTY. 21 Wall mounted mirror luminaire suitable for 1 X PL-5 11W fixtures (Philips Cat No. FMS 200/111 / Equivalent ) complete in everyway with accessories & lamps. Each 134 22 Bulkhead luminaire fitting suitable for 18 W CFL (Philips Cat No. FXC 101/ Equivalent ) complete in everyway with accessories & lamps Each 45 23 Decorative moulded body ceiling mounted fixture suitablefor 2 X 9W CFL (Havells Cat. No. LHDC27209024 / Equivalent ) complete in everyway with accessories & lamps. Each 10 24 Wall Bracket Lighting fixture suitable for 2 X 9W CFL (Havells Cat. No. LHDC01209017 / Equivalent ) complete in everyway with accessories & lamps. Each 97 25 Supplying of 1200mm A.C Ceiling fan sweep complete (Havells Cat. No. LHDC27209024 / Equivalent ) (But without regulator) Each 632 26 Supplying of wall mounted Turbo Force Air Circulators 450 MM Wall TF of Havells Cat. / Equivalent ) (But without regulator) Each 439 27 Supplying of Heavy Duty Exhaust Fan complete with louvers / shutter of following sizes a) 300 MM x 1400 RPM Single phase Nos 30 b) 380 MM x 1400 RPM Single phase Nos 113 TOTAL OF SUBHEAD II CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS UNIT RATE In Fig. Ru-Tech Services Inc. Page-3 Electrical BOQ.xls
SUBHEAD-III: DISTRIBUTION BOARDS Sl. No DESCRIPTION OF ITEM UNIT DISTRIBUTION BOARDS 1.1 Supplying and fixing following way, single pole and neutral, prewired, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with loose wire box, terminal box, duly prewired with suitable size FRLS PVC insulated copper conductor upto terminal blocks, tinned copper busbar, neutral links, earthbar, dinbar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) 2+4, Double door Each 10 1.2 Supplying, installation, testing and commissioning of surface/ recess mounting, vertical type, 415 volts, prewired, TPN MCB distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 200 amps tinned copper busbars, common neutral link, earth bar, din bar for mounting MCB's, detachable gland/ knock out plate, and with built in loose wire box, and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FRLS PVC insulated copper conductor upto the terminal connector/ neutral link and ready for installation of following ways (but without MCB's and incomer) as required. QTY. a) 4 way (4+12), Double door Each 51 b) 6 way (4+18), Double door Each 83 c) 8 way (4+24), Double door Each 81 d) 12 way (4+36), Double door Each 31 1.3 Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole, 10/16/20/32 Amps Nos 2629 b) Triple Pole, 16/20/32 Amps Nos 117 1.4 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps Each 10 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
SUBHEAD-III: DISTRIBUTION BOARDS Sl. No DESCRIPTION OF ITEM UNIT QTY. 1.5 Supplying and fixing following rating, foure pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 25 Amps Each 142 b) 40 Amps Each 20 c) 63 Amps Each 52 1.6 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board incuding drilling holes in cubicle panel, making connections, etc. as required. 100 Amp, 16kA Each 32 TOTAL OF SUBHEAD III CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
SUBHEAD-IV: TELEPHONE CONDUITING & WIRING UNIT RATE 1 Supplying and fixing cat 5e Information outlet for telephone sockets housed in GI boxes recessed in walls/ partitions/ panelling for telephone outlets Nos. 361 a) Single surface mount/recessed box within jacks (RJ-45) I/O (Cat-6) Nos 361 2 Fish wire of 5 SWG, fixing hardware etc., including cutting,chasing the walls/floor and filling the chased portion and making good the damages etc. complete as required a) 25 mm dia RM 1000 3 Supplying and drawing the following sizes of anealed tinned electrolytic copper conductor PVC insulated unshielded twisted wires in eisting conduitand making connection on both the ends. a) Cat -5 cable RM 15000 4 Supply, installation, testing, and commissioning of 24 port Jack Panel Cat 5e cable management system with all material as required. 5 Supplying and fixing the telephone tag blocks housed in MS boxes (with hinged cover and duly painted) recessed in wall with adequate knockouts including chase cutting and making the surface good and making connections complete as required Nos 28 a) 10 pair Nos 200 b) 20 pair Nos 1000 c) 50 pair Nos 1000 TOTAL OF SUBHEAD IV CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
SUBHEAD V: DATA NETWORKING 1 Supply, installation, testing and commissioning of category 6 flush mounted information outlets wired according to T568B standard with a faceplate. The plastic shall be high impact, flame retardent & ULrated thermoplastic with minimum insulation resistance of 500 M Ohm Nos. 657 2 Single surface mount/recessed box withn jacks (RJ-45) I/O (Cat-6) Nos 657 3 fish wire of 6 SWG, fixing hardware etc., including cutting,chasing the walls/floor and filling the chased portion ande making good the damages etc. complete as required a) 25 mm dia RM 4000 4 Supplying and drawing the following sizes of anealed tinned electrolytic copper conductor PCV insulated unshielded twisted wires in eisting conduitand making connection on both the ends. a) Cat - 6 cable RM 26280 5 Supply, installation, testing, and commissioning of 24 port Jack Panel Cat 6 cable management system with all material as required. Nos 22 6 Supply, installation, testing, and commissioning of 24 port switch with all meterial as required Nos 22 7 Supply, installation, testing, and commissioning of 12U rack with all meterial as required Nos 2 8 Supply, installation, testing, and commissioning of 12 port 1000 MBPS core switch with all materials as required. Nos 4 9 Supply, installation, testing, and commissioning of rack server 42U with all meterial as required Nos 3 10 Supply, installation, testing, and commissioning of patch cord 2 meter with all meterial as required Nos 657 Ru-Tech Services Inc. Page 1 Electrical BOQ.xls
SUBHEAD V: DATA NETWORKING 11 Supply, installation, testing, and commissioning of patch cord 5 meter (1 side R445 another side Unterminated)with all meterial as required Nos 657 12 Supply, installation, testing, and commissioning of information outlet(wi-fy)with all material as required Nos 20 13 Supply, installation, testing, and commissioning of UPS system with following features 1. High freq. PWM inverter using IGBT 2. Manual bypass switch 3. Inbuilt Static Switch 4. 80 Character Alpha Numeric LCD display with 5. SMF batteries to provide approx. 2 hours backup time on IT load alongwith battery rack. a. 8 KVA True on-line, Nos 2 b. 20 KVA True on-line, Nos 2 c. 25 KVA True on-line, Nos 1 d. 40 KVA True on-line, Nos 1 TOTAL OF SUBHEAD V CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page 2 Electrical BOQ.xls
SUBHEAD VI: LT CABLES & TERMINATIONS, CABLE TRAYS etc. Sl. No. DESCRIPTION OF ITEM UNIT QTY. 1.1 Supply and laying in cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground including the cost of digging and back filling with sand and brick protection as required and including testing and commissioning of the following sizes of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS : 7098 (Part-I). The costs shall include for all cables to be provided with a 1D gap and shall be properly clamped with cable clamps and ties. Identification tags shall be provided for all cables and route markers for cables in ground as per specifications and as per instructions of Engineerin-charge. a) 3.5 core, 185 Sq.mm. Meter 160 b) 3.5 core, 150 Sq.mm. Meter 20 c) 3.5 core, 120 Sq.mm. Meter 210 d) 3.5 core, 70 Sq.mm. Meter 460 e) 3.5 core, 50 Sq.mm. Meter 120 f) 3.5 core, 35 Sq.mm. Meter 95 g) 3.5 core, 25 Sq.mm. Meter 465 1.2 Supply and laying in cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground including the cost of digging and back filling with sand and brick protection as required and including testing and commissioning of the following sizes of 1.1KV grade multicore aluminium conductor PVC insulated and PVC sheathed armoured cable conforming to IS : 1554 (Part-I). Identification tags shall be provided for all cables and route markers for cables in ground as per specifications and as per instructions of Engineer-in-charge. a) 4 core, 16 Sq.mm. Meter 2505 b) 4 core, 10 Sq.mm. Meter 1580 c) 4 core, 6 Sq.mm. Meter 1810 d) 4 core, 4 Sq.mm. Meter 4770 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
SUBHEAD VI: LT CABLES & TERMINATIONS, CABLE TRAYS etc. Sl. No. DESCRIPTION OF ITEM UNIT QTY. 1.3 Supply and laying in cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground as required and including testing and commissioning of the following sizes of 1.1KV grade multicore copper conductor PVC insulated and PVC sheathed un-armoured cable conforming to IS : 1554 (Part-I). Identification tags shall be provided for all cables and route markers for cables in ground as per specifications and as per instructions of Engineer-in-charge. a) 4 core, 25 Sq.mm. Meter 190 b) 4 core, 16 Sq.mm. Meter 240 c) 4 core, 10 Sq.mm. Meter 380 d) 4 core, 6 Sq.mm. Meter 450 e) 4 core, 4 Sq.mm. Meter 3540 f) 4 core, 2.5 Sq.mm. Meter 1310 1.4 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 core, 185 Sq.mm. Set 6 b) 3.5 core, 150 Sq.mm. Set 2 c) 3.5 core, 120 Sq.mm. Set 10 d) 3.5 core, 70 Sq.mm. Set 19 e) 3.5 core, 50 Sq.mm. Set 4 f) 3.5 core, 35 Sq.mm. Set 4 g) 3.5 core, 25 Sq.mm. Set 18 h) 4 core, 16 Sq.mm. Set 102 i) 4 core, 10 Sq.mm. Set 64 j) 4 core, 6 Sq.mm. Set 72 k) 4 core, 4 Sq.mm. Set 258 l) 4 core, 2.5 Sq.mm. Set 46 Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
SUBHEAD VI: LT CABLES & TERMINATIONS, CABLE TRAYS etc. Sl. No. DESCRIPTION OF ITEM UNIT QTY. 1.5 Fabrication and installing following size of perforated M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc. as required. a) 375 mm width x 50 mm depth x 2.0 mm thickness Meter 1250 b) 150 mm width x 50 mm depth x 1.6 mm thickness Meter 300 c) 100 mm width x 50 mm depth x 1.6 mm thickness Meter 350 1.6 Providing & laying in position hume pipes of the following sizes in road crossings, paved areas etc., including collars, joints filled with cement mortar 1:4 (1 Cement :4 Coarse sand ) finished complete as required. a) 100mm dia Meter 150 b) 250mm dia Meter 100 TOTAL OF SUBHEAD VI CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-3 Electrical BOQ.xls
SUBHEAD VII: EARTHING Sl. DESCRIPTION OF ITEM No. 1 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as required. UNIT QTY. Set 36 2 Extra for using salt and charcoal for pipe earth electrode as required. Set 36 3 Supplying and laying 25 mm X 5 mm thick G.I. Strip at 0.5 meters below ground as strip earth electrod including soldering etc. as required. 4 Providing and Fixing 25mm x 5mm GI strip in 40 mm dia G.I. Pipe from earth electrode, as required. 5 Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. Metre 2350 Metre 1800 Metre 90 TOTAL OF SUBHEAD VII CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
SUBHEAD VIII: LIGHTENING Sl. No. DESCRIPTION OF ITEM UNIT 1 Supply, installation tested and commissioning of Early streamer Emission based advance Lightning Arrestor System made of 304 L stainless steel including supply and fixing of 1 no. support Mast on top of Mumti complete as required. Each 6 2 Supply and fixing GI strip 25 mm x 3 mm along outside wall / columns as vertical conductors fixing, saddles, screws complete as required. Each 240 3 Supply and laying in ground with GI strip 25 mm x 3 mm including the cost of digging and back filling complete as required for earth pits interconnection complete as required. Each 120 4 Providing and making maintenance free earthpits including the cost of 3 nos 16 mm dia 1.2 m long MS earth rods molecularly bonded with 250 micron copper and treated with 10 kgs ground enhancing back filled chemical TEREC+, all earth work, masonary enclosure with bituminized CI pit cover and frame as per IS 3043: 1987. Metre 12 TOTAL OF SUBHEAD VIII CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS QTY. ( Rs.) Ru-Tech Services Inc. Page 1 Electrical BOQ.xls
1.0 GUEST HOUSE MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 200A FP MCCB Ics=35kA with TMD release. 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 250A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 2 Nos. 100 A TP MCCB (Ics=25 ka) 6 Nos. 63 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 1.1 GUEST HOUSE SMB-GF,F/F,S/F,T/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 4 1 No. 63 Amp FP MCB(10kA) TP+N AL Busbar shall be suitable to carry 100A continuous current. 1Nos. 25 Amp TP MCB 2 Nos. 63 Amp TP MCB 1.2 GUEST HOUSE UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
1 No. 63 Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1.3 GUEST HOUSE AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 200A FP MCCB (Ics=35kA) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Busbar : 300A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 2 Nos. 100 A TP MCCB (Ics=25 ka) 1 Nos. 63 A TP MCB (Ics=10kA) All the O/G shall have with ON/OFF indication lamp. 2.0 COMMON ACTIVITY MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 250A FP MCCB Ics=35kA with Electronic release. 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
Busbar : 300A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 4 Nos. 100 A TP MCCB (Ics=25 ka) 5 Nos. 63 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 2.1 COMMON ACTIVITY SMB-GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 125A continuous current. 2 Nos. 25 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 2.2 COMMON ACTIVITY SMB-F/F,T/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 63 Amp FP MCB(10kA) TP+N AL Busbar shall be suitable to carry 100A continuous current. 2 Nos. 25 Amp TP MCB(10kA) 3 Nos. 40 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-3 Electrical BOQ.xls
2.3 COMMON ACTIVITY UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 63 Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 3 Nos. 25 Amp TP MCB(10kA) 2.4 COMMON ACTIVITY SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 63A Automatic transfer switch 1 No. 63 Amp FP MCB(10kA) TPN Busbar(Aluminium) shall be suitable to carry 100A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 2.5 COMMON ACTIVITY AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1No. 300A FP MCCB (Ics=35kA) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. Ru-Tech Services Inc. Page-4 Electrical BOQ.xls
2 Nos. ON/OFF indicating Lamp. Busbar : 350A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 100 A TP MCCB (Ics=25 ka) 1 Nos. 63 A TP MCB (Ics=10 ka) All the O/G shall have with ON/OFF indication lamp. 3.0 FILM &TV MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 1000A FP MDO ACB with microprocessor based O/L & S/C Protection 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 1250A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 200 A TP MCCB (Ics=25 ka) 3 Nos. 315 A TP MCCB (Ics=25 ka) 3 Nos. 100 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 3.1 FILM & TV SMB- 2 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 315 Amp FP MCCB(35kA) Ru-Tech Services Inc. Page-5 Electrical BOQ.xls
TP+N AL Busbar shall be suitable to carry 400A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 Nos. 40 Amp TP MCB(10kA) 6 Nos. 63 Amp TP MCB(10kA) 3.2 FILM & TV SMB- 1 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 315 Amp FP MCCB(35kA) TP+N AL Busbar shall be suitable to carry 350A continuous current. 6 Nos. 25 Amp TP MCB(10kA) 6 Nos. 63 Amp TP MCB(10kA) 3.3 FILM & TV SMB- FF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 Ru-Tech Services Inc. Page-6 Electrical BOQ.xls
1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 2 Nos. 25 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 3.4 FILM & TV SMB- SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 6 Nos. 25 Amp TP MCB(10kA) 5 Nos. 63 Amp TP MCB(10kA) 3.5 FILM & TV UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100Amp FP MCCB(Ics=25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 125A continuous current. 5 Nos. 40 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-7 Electrical BOQ.xls
Ru-Tech Services Inc. Page-8 Electrical BOQ.xls
3.6 FILM & TV UPS SUB-DB-1, Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 40Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 63A continuous current. 6 Nos. 20 Amp TP MCB(10kA) 3.7 FILM & TV UPS SUB-DB-2, 3 Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 40Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 63A continuous current. 3 Nos. 20 Amp TP MCB(10kA) 3.8 FILM & TV SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100A Automatic transfer switch 1 No. 100 Amp FP MCCB(25kA) Ru-Tech Services Inc. Page-9 Electrical BOQ.xls
TPN Busbar(Aluminium) shall be suitable to carry 125A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 3.9 FILM &TV AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 800A FP MDO ACB with microprocessor based O/L & S/C Protection. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Busbar : 1000A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 7 Nos. 100 A TP MCCB (Ics=25 ka) 6 Nos. 63 A TP MCB (Ics=10 ka) All the O/G shall have with ON/OFF indication lamp 4.0 PROFESSIONAL STUDIES MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 630A FP MCCB Ics=35kA with Electronic release. 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 800A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 2 Nos. 200 A TP MCCB (Ics=25 ka) Ru-Tech Services Inc. Page-10 Electrical BOQ.xls
2 Nos. 150 A TP MCCB (Ics=25 ka) 1 No. 125 A TP MCCB (Ics=25 ka) 2 Nos. 100 A TP MCCB (Ics=25 ka) Ru-Tech Services Inc. Page-11 Electrical BOQ.xls
1 No. 63 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 4.1 PROFESSIONAL STUDIES SMB-GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 250A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 No. 40 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 4.2 PROFESSIONAL STUDIES SMB-F/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 150 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 200A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 No. 40 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-12 Electrical BOQ.xls
4.3 PROFESSIONAL STUDIES SMB-S-T/F Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 125 Amp FP MCCB(25kA) with TMD release TP+N AL Busbar shall be suitable to carry 160A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 1 No. 40 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 4.4 PROFESSIONAL STUDIES UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100 Amp FP MCCB(25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 150A continuous current. 5 Nos. 63 Amp TP MCB(10kA) 4.5 PROFESSIONAL STUDIES UPS SUB-DB-1,2,3 Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 3 1 No. 63Amp FP MCB(10kA) Ru-Tech Services Inc. Page-13 Electrical BOQ.xls
TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4.6 PROFESSIONAL STUDIES SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 63A Automatic transfer switch 1 No. 63 Amp FP MCB(10kA) TPN Busbar(Aluminium) shall be suitable to carry 100A continuous current. 9 Nos. 25 Amp TP MCB(10kA) 4.7 PROFFESSIONAL STUDY AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 250A FP MCCB (Ics =35 ka ) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Busbar : 300A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 100 A TP MCCB (Ics=25 ka) 1 Nos. 63 A TP MCB (Ics=10 ka) Ru-Tech Services Inc. Page-14 Electrical BOQ.xls
All the O/G shall have with ON/OFF indication lamp. 5.0 FINE ARTS MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 800A FP MDO ACB with microprocessor based O/L & S/C Protection 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 1000A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 3 Nos. 200 A TP MCCB (Ics=25 ka) 3 Nos.160 A TP MCCB (Ics=25 ka) 4 Nos. 100 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 5.1 FINE ARTS SMB- 2 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 8 Nos. 63 Amp TP MCB(10kA) 5.2 FINE ARTS SMB- 1 GF Ru-Tech Services Inc. Page-15 Electrical BOQ.xls
Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 5.3 FINE ARTS SMB- FF, SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 160 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 200A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 5.4 FINE ARTS SMB- TF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100 Amp FP MCCB(25kA) Ru-Tech Services Inc. Page-16 Electrical BOQ.xls
TP+N AL Busbar shall be suitable to carry 125A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-17 Electrical BOQ.xls
5.5 FINE ARTS UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100Amp FP MCCB(Ics=25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 125A continuous current. 10 Nos. 25 Amp TP MCB(10kA) 5.6 FINE ARTS SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 100A Automatic transfer switch 1 No. 100 Amp FP MCCB(25kA) TPN Busbar(Aluminium) shall be suitable to carry 125A continuous current. 10 Nos. 25 Amp TP MCB(10kA) 5.7 FINE ARTS AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 500 A FP MCCB (Ics= 35 ka ) with TMD release. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. Ru-Tech Services Inc. Page-18 Electrical BOQ.xls
2 Nos. ON/OFF indicating Lamp. Busbar : 630 A TPN Al Busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 4 Nos. 100 A TP MCCB (Ics=25 ka) 5 Nos. 63 A TP MCB (Ics=10kA) All the O/G shall have with ON/OFF indication lamp 6.0 FASHION DESIGN MAIN LT PANEL Supply, erection, testing and commissioning of LT panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminum busbars complete with following accessories. Set 1 : 1 no. 1000A FP MDO ACB with microprocessor based O/L & S/C Protection 1 No. Multifunction meter with control MCBs. 2 Nos. ON/OFF indicating Lamp Busbar : 1250A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 1 Nos. 125 A TP MCCB (Ics=25 ka) 3 Nos. 315 A TP MCCB (Ics=25 ka) 4 Nos. 200 A TP MCCB (Ics=25 ka) 2 Nos. 160 A TP MCCB (Ics=25 ka) 1 Nos. 100 A TP MCCB (Ics=25 ka) All the O/G shall have with ON/OFF indication lamp 6.1 FASHION DESIGN SMB-1 SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 315 Amp FP MCCB(35kA) Ru-Tech Services Inc. Page-19 Electrical BOQ.xls
TP+N AL Busbar shall be suitable to carry 400A continuous current. 7 Nos. 25 Amp TP MCB(10kA) 5 Nos. 40 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 6.2 FASHION DESIGN SMB-1 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 300 Amp FP MCCB(35kA) TP+N AL Busbar shall be suitable to carry 400A continuous current. 7 Nos. 25 Amp TP MCB(10kA) 6 Nos. 40 Amp TP MCB(10kA) 2 Nos. 63 Amp TP MCB(10kA) 6.3 FASHION DESIGN SMB-2 GF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 4 Nos. 25 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-20 Electrical BOQ.xls
6 Nos. 63 Amp TP MCB(10kA) Ru-Tech Services Inc. Page-21 Electrical BOQ.xls
6.4 FASHION DESIGN SMB-FF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 250A continuous current. 5 Nos. 25 Amp TP MCB(10kA) 5 Nos. 63 Amp TP MCB(10kA) 6.5 FASHION DESIGN SMB-2 SF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 160 Amp FP MCCB(25kA) TP+N AL Busbar shall be suitable to carry 200A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 4 Nos. 63 Amp TP MCB(10kA) 6.6 FASHION DESIGN SMB-TF Supply, installation, testing & commissioning of LT Panel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 160 Amp FP MCCB(25kA) Ru-Tech Services Inc. Page-22 Electrical BOQ.xls
TP+N AL Busbar shall be suitable to carry 200A continuous current. 4 Nos. 25 Amp TP MCB(10kA) 3 Nos. 63 Amp TP MCB(10kA) 1 Nos. 40 Amp TP MCB(10kA) 6.7 FASHION DESIGN UPS DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 200Amp FP MCCB(Ics=25kA) TP+2N Busbar(Aluminium) shall be suitable to carry 250A continuous current. 5 Nos. 63 Amp TP MCB(10kA) 6.8 FASHION DESIGN UPS SUB-DB-1,2 Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 2 1 No. 63Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 6 Nos. 25 Amp TP MCB(10kA) 6.9 FASHION DESIGN UPS SUB-DB-3 Ru-Tech Services Inc. Page-23 Electrical BOQ.xls
Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 Ru-Tech Services Inc. Page-24 Electrical BOQ.xls
1 No. 63Amp FP MCB(10kA) TP+2N Busbar(Aluminium) shall be suitable to carry 100A continuous current. 9 Nos. 25 Amp TP MCB(10kA) 6.10 FASHION DESIGN SOLAR DB Supply, installation, testing & commissioning of LTPanel for 415 volts (nominal) 3 phase 4 wire, 50 Hz, CRCA sheet complete with busbars, meters, relays, indicating lamps, protection fuses, interconnections and having following incoming and outgoing as per the SLD and specifications. Set 1 1 No. 125A Automatic transfer switch 1 No. 125 Amp FP MCCB(25kA) TPN Busbar(Aluminium) shall be suitable to carry 150A continuous current. 10 Nos. 25 Amp TP MCB(10kA) 6.11 FASHION DESIGN AC DISTRIBUTION PANEL Supply, erection, testing and commissioning of AC Distribution panel fully compartmentalized (bolted type design) metal clad, floor mounted, both side extensible type switchboard made of 2 mm CRCA sheet suitable for 415 V, 3 phase 4 wire 50 Hz system, consisting of 3.5 strips Aluminium busbars complete with following accessories. Set 1 : 1 No. 1000A FP MDO ACB with microprocessor based O/L & S/C Protection. 1 No. Volt meter with Selector switch. 1 No. Ammeter with Selector switch. 2 Nos. ON/OFF indicating Lamp. Ru-Tech Services Inc. Page-25 Electrical BOQ.xls
Busbar : 1000A TPN Al busbar. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded. s : 7 Nos. 100 A TP MCCB (Ics=25 ka) 8 Nos. 63 A TP MCB (Ics=10 ka) All the O/G shall have with ON/OFF indication lamp TOTAL OF SUBHEAD IX CARRIED OVER TO SUMMARY OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-26 Electrical BOQ.xls
SUB-HEAD X: FIRE DETECTION AND ALARM 1 Supply, Installation, Testing & Commissioning of Microprocessor based addressable Fire Alarm Control Panel with with built-in Battery Back-up for identification of the fire location and fire alarm system control( each Loop consists of 199 devices and 199 detector). The panel shall have 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergency condition as detailled. Nos 6 2 Supply installation testing and commossioning of Repeater panel with LCD display with battery & battery charger completed as per specification as required. No 26 3 Supply, Installation, Testing & Commissioning of addressable Multicriteria photo thermal smoke detector including the cost of base plate mounting accessories as per detailed. 4 Supply, Installation, Testing & Commissioning of plug-in type addressable (ROR + Fixed temp) heat detectors including the cost of base plate mounting accessories as per detailed. 5 Supply, Installation, Testing & Commissioning of Addressable type Duct Detector complete as per detailed. 6 Supply, Installation, Testing & Commissioning of Control Modules for trip off of (AHU+Fire Damper etc) and as required. The control module should have 2 independent outputs including the cost of mounting accessories complete as per detailed. 7 Supply, Installation, Testing & Commissioning of Addressable Manual Call Point break glass type with Alarm LED and mounting accessories complete as per detailed. 8 Supply, Installation, Testing & Commissioning of Monitor Module with minimum of 2 monitoring inputs for various applications complete as per detailed. Nos 204 Nos 773 Nos 2 Nos 4 Nos 60 Nos. 15 Ru-Tech Services Inc. Page-1 Electrical BOQ.xls
SUB-HEAD X: FIRE DETECTION AND ALARM 9 Supply, Installation, Testing & Commissioning of Hooter including the cost of mounting complete as per detailed. Nos 63 10 Supply, Installation, Testing & Commissioning of Response indicator complete as per detailed. Nos 210 11 Supply,Installation,Testing & Commissioning of Fire exit sign (Illuminated) made from etched sheet with LED illumination and all electrical accessories including battery and battery charger etc. as Nos 88 per detailled. 12 Supplying and fixing of 2X 1.5 sq. mm PVC insulated Copper conductor wire. RM 14655 13 Supplying and fixing of 4X 1.5 sq. mm PVC insulated Copper conductor wire. RM 3690 14 Supplying and fixing of following sizes of MS conduit along with the accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm Metre 12842 TOTAL OF SUBHEAD XI OF ELECTRICAL WORKS Ru-Tech Services Inc. Page-2 Electrical BOQ.xls
LIST OF APPROVED MANUFACTURERS S.NO. Brief Description of Material Name of Approved Makes 1 11 KV VCB PANEL BOARD. SIEMENS / AREVA / ABB / CROMPTON GREAVES / KIRLOSKAR 2 XLPE 11 KV CABLE CCI / UNIVERSAL / NICCO / POLYCAB / HAVELLS 3 HT TERMINATIONS CAB SEAL / RAYCHEM / YAMUNA GAS 4 OIL TYPE TRANSFORMERS CROMPTON GREAVES / EMCO / KIRLOSKAR / ECE / AREVA 5 OLTC OLG / CTR / CROMPTON 6 DIESEL ENGINE CATERPILLAR / CUMMINS / KOHLER / MTU / PERKINS 7 ALTERNATOR STAMFORD / CATERPILLAR / LEROY SOMER & CONTROL 8 BATTERY CHARGER EXPO-FYN / AMAR RAJA / CHHABI ELECTRICALS / VOLSTAT 9 BATTERIES EXCIDE / AMARA RAJA / STANDARD FARRUKAWA / OKAYA 10 CAPACITORS L & T / GE / ABB / EPCOS 11 APFCR L & T / SYSTEM SENSOR / ABB / SIEMENS 12 PROTECTION RELAY SIEMENS / EASUN / ABB / L & T ( PNB - Gold Series) 13 DIGITAL/ MICROPROCESSOR BASED ENERGY METERS ABB / L & T / NEPTUNE / SECURE / ENERCON / FPI 14 LT CABLES HAVELLS / TECHNOCARE / NICCO / FINOLEX / POLYCAB / ECHO / SKYTONE / LAPP CABLE 15 PVC INSULATED WIRES HAVELLS / TECHNOCARE / NICCO / FINOLEX / POLYCAB / ECHO / SKYTONE / LAPP CABLE 16 CAT - 6 CABLES AWAYA / LAPPCABLE 17 RG - 6 / RG - 11 COMSOB / SKYLINE / PLYCAB 18 TELEPHONE TAG BLOCKS MK / L K FUGA / CLIPSAL / LEGRAND / KRON 19 CABLE TRAY PILCO / UBITECH / RICO STEEL / STEELCO
LIST OF APPROVED MANUFACTURERS S.NO. Brief Description of Material Name of Approved Makes 20 CABLE COMPRESSION GLANDS COMET / PEECO / RAYCHEM 21 CABLE LUGS DOWELS / RAYCHEM 22 MODULAR RANGE OF SWITCHES, SOCKET HONEY WELL / CLIPSAL / LEGRAND / CRABTREE / HAVELLS 23 INDUSTRIAL SOCKET & PLUGS INDO ASIAN / SIEMENS / SCHNEIDER / CROMPTON / LEGRAND/ BCH / HAGGER 24 STEEL CONDUIT BEC / AKG / STEEL KRAFT 25 LIGHT FIXTURES PHILIPS / BAJAJ / CROMPTON / HAVELLS / THORN 26 CEILING FANS CROMPTON GREAVES / HAVELLS / USHA / KHAITAN 27 EXHAUST FAN CROMPTON GREAVES / USHA / KHAITAN / HAVELLS 28 MV PANELS TRICOLITE / MILESTONE SWITCHGEARS / MADHUELECTRICALS/ UBITECH / CONTROLS & SWITCHGEARS 29 BUSDUCTS / RISING MAIN TRICOLITE / MILESTONE SWITCHGEARS / MADHUELECTRICALS/ UBITECH / CONTROLS & SWITCHGEARS / ZETA 30 AIR CIRCUIT BREAKER L & T (U Power ) / SIEMENS / ABB / SCHNEIDER( MASTERPACK) 31 MCCB SCHNEIDER (COMPAC) / SIEMENS / HAGGER / ABB / LEGRAND 32 MCB-DB's, MCB, ELCB MCB-Isolator SCHNEIDER etc. (COMPAC) / SIEMENS / L & T / ABB / LEGRAND / INDOASIAN / HAVELLS / MK 33 FSU/SDFU/SFU L & T/ ABB / SIEMENS / HAVELLS / C & S 34 Power Contactors L & T/ ABB / SIEMENS / SCHNEIDER / C & S 35 Measuring Instruments AE / MECO / Rishline (L & T) / RAAS Controls NOTE: 1. Above makes of materials are approved subject to their meeting the tender specifications & requirements. Contractor however shall seek approval of specific make from the engineer incharge before commencement the work. The final choice of make to be used in the work will rest with RITES and the decision of the Engineer -in-charge shall be final & binding on the contractor. 2. For any item not covered in the above list, the contractor shall get the make & sample approved from the Engineer-in-charge before procurement. The final choice of make to be used in the work will rest with RITES and the decision of the engineer -in-charge shall be final & binding on the contractor in this respect.