U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils (,W) Wide range of sub-bases and accessories Technical ata edium: ompressed air, filtered to μm, lubricated or non-lubricated Operation: Spool Valve, solenoid pilot or air pilot actuated ounting position: On sub-bases Sizes: ISO,, and Operating pressure: bar - solenoid pilot actuated valves 6 bar - solenoid pilot and air pilot actuated valves Pilot pressure: etails of see overleaf xternalal pilot supply: optional low characteristics Size unction l/min v v ISO /,, ISO / P 66,67,8 ISO /,7,86 ISO / P,, ISO /,,6 ISO / P 7,8,8 ISO / 66,77,9 ISO / P 9,9,79 luid/mbient temperature:... + solenoid pilot actuated valves... +8 air pilot actuated valves ir supply must be dry enough to avoid ice formation at temperatures below +. aterials: ody: die cast aluminium Spool: light alloy aluminium Seals: NR / Solenoid pilot actuated valves bar models - ISO Operator/return Pilot supply low Operating pressure Pilot pressure Weight rawing odel size (l/min) (kg) No. Solenoid/spring Internal..., U///6/* Solenoid/spring and air Internal,...,7 U//7/6/* Solenoid/spring and air Internal,..., U//7/6/* Solenoid/spring and air Internal 66,...,7 U/6/7/6/* Solenoid/spring xternal -,9... 6, *)..., U///6/* Solenoid/spring xternal -,9... 6,8 *)...,7 U///6/* Solenoid/spring xternal -,9... 6,8 *)..., U///6/* Solenoid/spring xternal 66 -,9... 6,8 *)...,7 U/6//6/* Solenoid/ solenoid Internal...,9 U///6/* Solenoid/ solenoid Internal...,8 U///6/* HSolenoid/ solenoid Internal..., U///6/* Solenoid/ solenoid Internal 66..., U/6//6/* Solenoid/ solenoid xternal -,9... 6, *)...,9 U///6/* Solenoid/ solenoid xternal -,9... 6, *)...,8 U///6/* Solenoid/ solenoid xternal -,9... 6, *)..., U///6/* Solenoid/ solenoid xternal 66 -,9... 6, *)..., U/6//6/* * Insert voltage code from page. Standard are: for V d.c. or 9 for Va.c. *) plus (, x supply pressure) 7/ N/en...
U/ / Solenoid Pilot ctuated Valves bar models ISO size unction Operator/return Pilot supply low (l/min) Operating pressure P Solenoid/ solenoid Internal 66...,9 U//6/6/* P Solenoid/ solenoid Internal,8...,8 U//6/6/* P H Solenoid/ solenoid Internal 7,8..., U//6/6/* P Solenoid/ solenoid Internal 9,8..., U/6/6/6/* O Solenoid/ solenoid Internal 66,...,9 U/6/6/6/* O Solenoid/ solenoid Internal,8...,8 U/6/6/6/* O Solenoid/ solenoid Internal 7,8..., U/6/6/6/* O Solenoid/ solenoid Internal 9,8..., U/66/6/6/* * Insert voltage code from table below. Standard are: for V d.c. or 9 for Va.c. P = ll Ports locked O = entre Open xhaust Weight (kg) rawing No. odel lectrical details for bar solenoid operators Voltage tolerance ± % Rating Inlet orifice lectrical connection Solenoid oil anual override (with threaded diffuser) Protection lass % ontinuous uty, mm IN N 7-8 (IN 6) form IN N 7-8 (IN 6) form Industrial Standard mm ay be rotated at 9 intervals Push to operate spring return (standard code 6) Screwdriver memory type (optional code 6) IP 6 with sealed plug Voltage codes and spare coils for bar models Voltage mm oil with connector interface acc. to Industrial Standard oil Part.-no. mm oil with connector interface acc. to IN N 7-8 form oil Part.-no. mm oil with connector interface acc. to IN N 7-8 form oil Part.-no. ode Power Inrush/Hold ode Power Inrush/Hold ode Power Inrush/Hold V d.c. W Q/8// L W V66-L N, W V6-N V d.c. W Q/8// L W V66-L N, W V6-N V /6 Hz /, V Q/8// L /, V V66-L N / V V6-N 8 V /6 Hz 6 /, V Q/8/6/ 6L /, V V66-6L 6N / V V6-6N / V /6 Hz 8 /, V Q/8/8/ 8L /, V V66-8L 8N / V V6-8N / V /6 Hz 9 9/, V Q/8/9/ 9L 9/, V V66-9L 9N / V V6-9N Other Voltages available on request. onnector plugs to be ordered separately. or technical data see section 7.7.. N/en... 7/
U/ / Solenoid pilot actuated valves 6 bar models - ISO Operator/return Pilot supply low Operating pressure Pilot pressure Weight rawing odel - size (l/min) (kg) No. Solenoid/spring Internal... 6, U///8/* Solenoid/spring and air Internal,... 6,7 U//7/8/* Solenoid/spring and air Internal,... 6, U//7/8/* Solenoid/spring and air Internal 66,... 6,7 U/6/7/8/* Solenoid/spring xternal -,9... 6, *)... 6, U///8/* Solenoid/spring xternal -,9... 6,8 *)... 6,7 U///8/* Solenoid/spring xternal -,9... 6,8 *)... 6, U///8/* Solenoid/spring xternal 66 -,9... 6,8 *)... 6,7 U/6//8/* Solenoid/ solenoid Internal... 6,9 U///8/* Solenoid/ solenoid Internal... 6,8 U///8/* HSolenoid/ solenoid Internal... 6, U///8/* Solenoid/ solenoid Internal 66... 6, U/6//8/* Solenoid/ solenoid xternal -,9... 6, *)... 6,9 U///8/* Solenoid/ solenoid xternal -,9... 6, *)... 6,8 U///8/* Solenoid/ solenoid xternal -,9... 6, *)... 6, U///8/* Solenoid/ solenoid xternal 66 -,9... 6, *)... 6, U/6//8/* * Insert voltage code from table below. Standard are: N for V d.c. or 89N for V a.c. *) plus (, x supply pressure) / Solenoid Pilot ctuated Valves bar (6 bar) models ISO size unction Operator/return Pilot supply low (l/min) Operating pressure P Solenoid/ solenoid Internal 66...,9 U//6/8/* P Solenoid/ solenoid Internal,8...,8 U//6/8/* P H Solenoid/ solenoid Internal 7,8..., U//6/8/* P Solenoid/ solenoid Internal 9,8..., U/6/6/8/* O Solenoid/ solenoid Internal 66,...,9 U/6/6/8/* O Solenoid/ solenoid Internal,8...,8 U/6/6/8/* O Solenoid/ solenoid Internal 7,8..., U/6/6/8/* O Solenoid/ solenoid Internal 9,8..., U/66/6/8/* * Insert voltage code from table below. Standard are: N for V d.c. or 89N for V a.c. P = ll Ports locked O = entre Open xhaust Weight (kg) rawing No. odel lectrical details for 6 bar solenoid operators Voltage tolerance ± % Rating Inlet orifice lectrical connection Solenoid oil anual override (with threaded diffuser) Protection lass % ontinuous uty, mm IN N 7-8 (IN 6) form ay be rotated at 9 intervals Push to operate spring return (standard code 8) Screwdriver memory type (optional code 8) IP 6 with sealed plug Voltage codes and spare coils for 6 bar models Voltage mm oil oil Part.-no. with connector interface acc. to IN N 7-8 form Power ode Inrush/hold V d.c. N W V6- / V /6 Hz 88N /8 V V6-8 / V /6 Hz 89N /8 V V6-9 Other Voltages available on request. onnector plugs to be ordered separately. or technical data see section 7.7.. 7/ N/en...
U/ / pilot actuated valves 6 bar models ISO size Operator/return low (l/min) Standard version / Solenoid pilot actuated valves 6 bar models Operating pressure Pilot pressure ir/spring -,9... 6, *)... 6, 6 U// ir/spring -,9... 6,8 *)... 6,6 6 U// ir/spring -,9... 6,8 *)... 6, 6 U// ir/spring 66 -,9... 6,8 *)... 6, 6 U/6/ v -,9... 6, *)... 6, U// ir/air -,9... 6, *)... 6, U// ir/air -,9... 6, *)... 6,9 U// ir/air 66 -,9... 6, *)... 6, U/6/ *) plus (, x supply pressure) Weight (kg) rawing No. odel *) plus (, x supply pressure) P = ll Ports locked O = entre Open xhaust ISO size unction Operator/return low (l/min) Operating pressure Pilot pressure Weight (kg) rawing No. P ir/air 66 -,9... 6, *)... 6, U//6 P ir/air -,9... 6,8 *)... 6, U//6 P ir/air 7 -,9... 6,8 *)... 6,9 U//6 P ir/air 9 -,9... 6,8 *)... 6, U/6/6 O ir/air 66 -,9... 6, *)... 6, U/6/6 O ir/air -,9... 6,8 *)... 6, U/6/6 O ir/air 7 -,9... 6,8 *)... 6,9 U/6/6 O ir/air 9 -,9... 6,8 *)... 6, U/66/6 odel N/en... 7/
U/ ccessories mm coil according to Industrial standard mm coil according to IN N 7-8 form mm coil according to IN N 7-8 form /P96 68 77 Sub-bases, end plates and blanking disc V sub-base options orm Single station sub-base side ported orm Single station sub-base bottom ported orm odular sub-base orm nd plates lanking disc for V sub-bases *) Page 7 thread NPT thread Page 7 thread Page 8 thread NPT thread Page 8 thread NPT thread Page 8 thread ISO /P96 (/ ) /P96 (/ ) /P9 (/) Q/// 9-8 Q/// 9-89 P 88 9- ISO /P9 (/8 ) /P9 (/8 ) /P9 (/8) Q/// 9- Q/// 9-9 P 88 9- ISO /P98 (/ ) /P98 (/ ) /P97 (/) Q/// 9-6 Q/// 9-9 P 88 9- ISO /P9 (/ ) /P9 (/) Q/6// Q/6// NPT thread Universal sub-base options for ISO parallel thread only odular base with side, end and bottom ports open Universal end plate, all ports blocked Universal end plate, side ports open Transition plate from ISO to ISO lanking disk for ISO and ISO *) Page 9 Page 9 Page 9 Page Page ISO Q///7 (/) Q//8 (/) Q/// (/) Q///9 ( ) /P7 ISO Q///7 (/8) Q//8 (/8) Q/// (/8) Q///9 ( ) /P7 *) or multipressure systems ccessories for - and NPT threads lanking plate for V and universal sub-bases Transition plate for V sub-bases low regulator sandwich plate Silencer Page 8 Page 9 Page Page 8 ISO Q/// Q/// ( to ) Q///6 ISO Q/// Q/// ( to ) Q///6 ISO Q/// P87 ( to ) Q///6 ISO Q/6// Q/6//6 Spares its odel escription Q/// Q/// Q/// Q/6// Spares it for ISO # Valves (U/) Spares it for ISO # Valves (U/) Spares it for ISO # Valves (U/) Spares it for ISO # Valves (U/6) 7/ N/en...
U/ / Single solenoid valves ISO size / and / ouble solenoid valves ISO size N N ISO size N * 7 7 9, 6 8 8 or * Illustrated with mm coil ISO size N * 7 68 7 9, 6 8 8 or * Illustrated with mm coil / Single solenoid valves ISO size, and / and / ouble solenoid valves ISO size, and N N ISO size N * 6 8 9 6 8 8 or 8 6 9 8 8 68 6 8 or 77 87 8 8 7 8 8 or * Illustrated with mm coil ISO size N * 6 8 9 6 8 8 or 8 8 8 68 6 8 or 77 8 8 7 8 8 or * Illustrated with mm coil anual override odel.../7 odel.../,.../ N/en...6 7/
U/ / and / ouble air pilot valves ISO size,, and / Single air pilot valves ISO size,, and 6 ISO size odel ll valves 7 9,, 6 8 8.../,.../6 6 9 6 8 8.../,.../6 8 8 68 6 8.../,.../6 6 8 7 8 8 ISO size odel.../ 9 6 8 8.../ 6 8 68 6 8.../ 87 8 7 8 8 Sub-bases and end plates V sub-base options Single station sub-base side ported (orm ) for ISO and NPT threads Single station sub-base bottom ported (orm ) for ISO and NPT threads d h d L8 L6 h d d L b L9 L7 h L L d L9 h L L7 b d L6 L8 d h b h b h ISO b d d d h h h odel 8, / /8, (,) #/P96 7 6,6 /8 /8 (6) #/P9 7 6,6 / /8 8 #/P98 8 9 / /8 9 /P9 ISO b b b d d d d h odel 6 7, / /8, #/P9 6 8 7 6,6 /8 /8 6,6 #/P9 7 6,6 / /8 6,6 #/P97 8 9 / /8 9, 8 /P9 ISO h L L6 L7 L8 L9 L kg odel, 8 98 8,6 #/P96 6 7 9,8 #/P9 9 68 9 6 9,6 #/P98 86 9 7 8 /P9 ( ) imension for ports and. # Insert for ISO parallel or for NPT threads ISO h h L L6 L7 L8 L9 L kg odel 6 6 98 8,9 #/P9 6, 8 6 7 9, #/P9 8 9 9 68 9 6 9, #/P97 9 9 86 6 9 7 8 /P9 7/ N/en...7
I U/ odular sub-bases (orm ) and end plates (orm ) for ISO and NPT threads + (n + ) + (n + ) /8 h L H L L L d6 h h ISO H I kg odel thread odel NPT thread, 7, 8 7, Q/// 9-8 6 6 6 6 9,6 Q/// 9-6 7 6 8,7 Q/// 9-6 6 8 8 9 6 Q/6// ISO L h h h L L d6 kg odel odel NPT thread 8 8, 6 / 6 8 /8, Q/// 9-89 9 /8 7 8 /, Q/// 9-9 8 / 6 9,66 Q/// 9-9 6 / 8 Q/6// lanking plate for V & universal sub-bases with ISO and NPT threads Silencer for V & universal sub-bases with ISO and NPT threads L h h h b ISO b L h h h kg odel 8, Q/// 8,,,,9 Q/// 7,,,,6 Q/// 8,,,,9 Q/6// ISO H odel 77 8 /8 N/en...8 7/
U/ Transition plate from ISO to ISO and ISO to ISO for V sub-bases for ISO and NPT threads lanking disc P88, P88 & P88 for ISO thread 9-, 9- & 9- for NPT thread ISO kg odel to 6, Q/// to 6 8,6 Q/// to 8,9 P87 lanking disc (P.) or 9-... 7/ N/en...9
U/ Universal sub-base options for ISO threads only odular base with side, end and bottom ports open Transition plate from ISO to ISO N H L ISO H L N kg odel 6 6 9, / /8 8 6 8,6 Q///7 6 6, /8 /8 68 9 8, Q///7 ISO kg odel to 6, Q///9 Universal end plate, all ports blocked Universal end plate, side ports open P P / / / / Q S X P S / / / / O R T O R T ISO P Q R S T X kg odel 6 6 9, /8 / 9, Q///8 6 6, 9 / / 8 7 8, Q///8 ISO P R S T kg odel 6 6 9, /8 9, Q/// 6 6, 9 / 8 7, Q// rill dimensions for opening ports / Ø 8 /8 Ø / Ø rill dimensions for opening ports / Ø 8 /8 Ø / Ø lanking disk for ISO and ISO universal sub-bases ISO kg odel, /P7, /P7 N/en... 7/
U/ low regulator plate ISO size pplication Operating pressure odel Regulation of exhaust ports and allows easy -,9... 6 Q///6 cylinder speed control. The regulator screw can be locked with the counter Q///6 nut. Q///6 Q/6//6 low characteristics (at 6 bar inlet pressure, bar pressure drop) low port» and port» remains unchanged! ISO ISO xhaust flow (port + ) xhaust flow (port + ) l/min 8 7 6 l/min 6 7 8 9 Number of turns from closed 6 7 8 9 Number of turns from closed ISO ISO xhaust flow (port + ) xhaust flow (port + ) l/min 6 8 6 l/min imensions 6 7 8 9 Number of turns from closed 6 7 8 9 Number of turns from closed Open ISO kg odel 8 8 9, Q///6 8,, Q///6 9 8, 6,,86 Q///6 9 76 7, Q/6//6 losed Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under»technical features«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORRN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 7/ N/en...