RF Lite - How to Use Overview March 2013
Agenda Overview Project Settings Region Classifications Adding Wireless Devices RF Analysis and Device Connectivity Device Summary Report Summary
RF Lite Overview RF Lite is a software package that runs as a standalone application on a PC. It allows the import of a location map, placement of ISA100 wireless devices on the map, and guides the user through a simulation of RF coverage. Better and faster front end proposals by Sales. Network planning risk reduction. Simple and easy to use by non- RF experienced personnel. Higher confidence and less re- work after installation.
RF Lite Overview RF Lite is designed for ease of use. Creation of an application layout and RF analysis is a step-by-step process. RF analysis is performed with conservative parameters. Reference DMB13-16 titled RF Lite Software Availability, dated March 4, 2013, for RF Lite software installation guidelines. Getting Started click on the RF Lite icon or open the RF Lite program on your PC.
RF Lite Initial screen: create a new project file or open an existing project file
RF Lite Identify and save a new project file.
RF Lite Project Settings Identify project parameters: - regional location of opportunity - application environment a) indoor b) outdoor c) industrial - enter project comments - select background view/image
RF Lite Project Settings Select scaling in ft. or meters
RF Lite HELP Support Select HELP
RF Lite HELP Support
RF Lite HELP Support
RF Lite HELP Support
RF Lite Setup and View Tabs Tabs identify different RF Lite application views
RF Lite Move to next setup page
RF Lite Ruler Calibration for Image Calibrate image size click to select
RF Lite Ruler Calibration for Image After ruler calibration is selected, move cursor to initial location of measured object, click mouse, hold and drag mouse to end location and release. Dialog box appears for entering dimension value in ft. or meters.
RF Lite Region Selections Select sub-regions of your application view and outline areas - tank farms - buildings - light process - heavy process
RF Lite Region Selections Select sub-region, drag mouse to image area, click, move mouse, click
RF Lite Region Selections Note: Region selection is completed when last point is located and mouse clicked on starting selection point. Move mouse, click, move mouse, click, move mouse, click
RF Lite Region Selections Differing sub-regions can be selected for a single layout/image.
RF Lite Region Selections Google map background image example with 3 different sub-regions highlighted.
RF Lite Wireless Device Placement After sub-regions completed, mouse click select, drag and drop devices to locations. Note: Red arrow in top left of image identifies device reference (anchor) location.
RF Lite Wireless Device Configuration Right click on device for selection options
RF Lite Wireless Device Configuration
RF Lite Wireless Device Configuration
RF Lite RF Analysis After devices are placed on map, click on coverage tab to display RF coverage map view.
RF Lite RF Analysis Go back to Views tab to add additional devices, and then return to Coverage view to recalculate and display RF coverage map. Routing FDAP was added.
RF Lite Distance Measurement Distance measurement tool.
RF Lite Distance Measurement Click on tool, move mouse to selected location, click, hold and drag mouse to second location distance displayed.
RF Lite RF Analysis Heatmap view displays full ISA100 wireless RF coverage.
RF Lite Device Connectivity Connectivity view displays device communications connection paths. Placement of mouse pointer on connection link displays RSSI value.
RF Lite Device Connectivity Routes view displays device most probable communications connection paths. Primary route displayed in green, secondary in orange.
RF Lite Network Analysis The network in the design area is validated to have redundant connectivity and capacity.
RF Lite Project Summary Report Generate device report.
RF Lite Save Current View Print File Save current view Print file.
RF Lite Summary Helps in the Sales Bidding Process - Quick network layout and verification can help in the bidding process - Documentation of the designed network - Improves customer confidence Allow customer/distributor to develop their own solution - As a starting point for installation Standardized process for wireless network planning across geographies - Improves readability and reduces human errors If you need some help contact Virgus Volertas