Guide to Patch Cords. and Pigtails. www.fibrefab.co

Guide to Patch Cords and Pigtails www.fibrefab.co

Established in 1992, FibreFab is a leading provider of fibre optic connectivity products used in data communications and telecommunication networks. The company designs, develops, manufactures and sells fibre optic cabling, connectivity, management and systems solutions. It offers a broad range of products directly and through distributors, installers and OEM partners. Customer Service FibreFab s growth has been founded on quality products, rapid response and excellent customer service. Quality All products are manufactured in ISO9001:2008 certified facilities and conform to applicable international standards. FibreFab is dedicated to value and continuous improvement of all its products and services. Global Logistics In 1994 FibreFab acquired Optronics, a company with over 20 years experience in fibre optic manufacturing. Optronics products are available directly from FibreFab or from our worldwide distribution partners. Wide Range The Optronics fibre optic cable range includes simplex, duplex and flat ribbon patch cords, tight buffered, single loose tube and multi loose tube distribution cables for internal and external applications as well as many variations of armoured, aerial, rodent resistant and water blocked cables. Solutions The FibreFab Optronics range has the solution for almost any application and can offer a cut to length service for specific fibre optic bulk and patch cables. Please call the sales team for more information. With headquarters in Milton Keynes (UK), FibreFab has manufacturing activities in the UK, China and US. The Company has both volume and quick response manufacturing capabilities and is able to support the global logistics requirements of its customers. FibreFab provides customised and customer branded products for OEM customers. UK Rapid Response & Production Facilities China Production Facility FiberFab Inc USA FibreFab Ltd UK Optronics FZ LLC UAE FibreFab Asia & Pacifi China

Contents Patch Cord Guide 4-7 For Premise/Data Environments 4 For Central Office Telcom 5 For Data Centres 6 For Specialist Applications 7 Premise / Data Environments 10-30 9/125 (OS2) Optical Fibre Patch Cords 10 62.5/125 (OM1) Optical Fibre Patch Cords 11 50/125 (OM2) Optical Fibre Patch Cords 12 50/125 (OM3) Optical Fibre Patch Cords 13 50/125 (OM4) Optical Fibre Patch Cords 14 PRE-TERMINATED SOLUTIONS AVAILABLE E2000 Patch Cords 15 G.657A and G.657A/B PureLight also available G.657A and G.657A/B PureLight also available Patch Cord Part Number Generator 16 Premium Patch Cords 17 9/125 (Singlemode) Optical Fibre Pigtails 20 62.5/125 (OM1) Optical Fibre Pigtails 22 50125 (OM2) Optical Fibre Pigtails 24 50/125 (OM3) Optical FIbre Pigtails 26 50/125 (OM4) Optical FIbre Pigtails 28 Semi - Tight Buffer Pigtail 30 Cabled Pigtails 31 Central Office / Telcom 34-40 Telcom Patch Cords 34 OS1/OS2 G657 LC & SC Short Boot Patch Cords 36 9/125 Telcom Pigtails 38 Attenuated Patch Cords 40 Data Centres 42-50 Data Centre Patch Cords 42 OM3/OM4 RBS LC Short Boot Patch Cords 44 msfp Mini LC Patch Cords 46 Uniboot Patch Cords 48 QuickFlip Reversible Polarity 50 Specialist Applications 54-61 High Performance Patch Cords 54 Armoured Patch Cords 56 Mode Conditioning Patch Cords 58 Reference Test Leads 60 OM3 & OM4 Multimode Pigtail sets 61

4 Premise Data Environments Central Office Telcom Data Centre Specialist Application Patch Cords For Premise/Data Environments PREMISE & DATA 1 Pigtails See page 20-31 Bag Packed Pigtails See page 24-26 2 Blister Packed Pigtails See page 24-26 3 4 Standard Patch Cords See page 10-14 Uniboot Patch Cords See page 48-50 5 Our extensive range of pigtails and patch cords cater for premise and data environments with a full range of multimode and single mode fibre types supporting OM1, OM2, OM3, OS1 and OS2 applications. A wide range of connector types are available for brand new state of the art installations to expantion of legacy networks. FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telco Data Centre Specialist Applications 5 Patch Cords For Central Office / Telco MDU SDU Standard Boot 90 Boots Short Boots Standard Boot 44mm TELCO PATCHING AREA Patch Cord with Short Boot See page 36 1 2 Telcom Pigtails (G652D, G657A1/2) See page 38 Short Boot 18mm CENTRAL OFFICE Telcom Patch Cords See page 34 3 4 Attenuated Patch Cords See page 40 Our Telcom Grade pigtails and patchcords with a full range of singlemode optical fibre types including G652D, G657A1/A2/ B3 and G655 C/D/E. The low loss termination grade offered is specifically designed for critical telcom applications. VISIT US ONLINE NOW WWW.FIBREFAB.COM

6 Premise Data Environments Central Office Telcom Data Centre Specialist Applications Patch Cords For Data Centres Server Farm Main Distribution Area Storage Area Data Centre Patch Cord See page 42 1 DATA CENTRE Patch Cord with Short Boot See page 44 2 Standard Boot 44mm 18mm Short Boot Uniboot Patch Cords See page 48 3 5 RBS Patch Cords See page 44 msfp Mini LC Patch Cords See page 46 4 Our Data Centre Grade patchcords are complimented with a full range of high performance multimode optical fibre types supporting OM3 and OM4 applications with standard and reduced bend sensitivity. The low loss termination grade is offered specifically designed for critical datacentre applications. FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centre Specialist Applications 7 Patch Cords For Specialist Applications DATA CENTRE TELCO PREMISE & DATA 1 2 Reference Test Leads See page 60 Armoured Patch Cords See page 56 3 Mode Conditioning Patch Cords See page 58 Our extensive portfolio also includes a range of specialised patchcords for use in a wide range of applications. The target applications shown in this brochure are test and measurement, extreme environment and legacy networks. VISIT US ONLINE NOW WWW.FIBREFAB.COM

Premise/Data Environments 9/125 (OS2) Optical Fibre Patch Cords 10 62.5/125 (OM1) Optical Fibre Patch Cords 11 50/125 (OM2) Optical Fibre Patch Cords 12 50/125 (OM3) Optical Fibre Patch Cords 13 50/125 (OM4) Optical Fibre Patch Cords 14 E2000 Patch Cords 15 Patch Cord Part Number Generator 16 Premium Patch Cords 17 9/125 (Singlemode) Optical Fibre Pigtails 20 62.5/125 (OM1) Optical Fibre Pigtails 22 50/125 (OM2) Optical Fibre Pigtails 24 50/125 (OM3) Optical Fibre Pigtails 26 50/125 (OM4) Optical Fibre Pigtails 28 Semi- Tight Buffer Pigtail 30 Cabled Pigtails 31 OS1 / OS2 OM1, OM2, OM3, OM4 Pigtails Patch Cords

10 Premise Data Environments Central Office Telcom Data Centres Specialist Application 9/125 (OS2) Optical Fibre Patch Cords For Premise / Data Environments Single mode patch cords are used for telecom networks and also used for high speed metropolitan and access network. The single mode patch cords are manufactured using LSZH cables which conform to IEC, EIA TIA or Telcordia standards. The OS2 patch cords are terminated with standard connectors which give optimum optical performance. Features SC, LC, ST, FC, MU and connectors UPC and APC connectors Low smoke zero halogen (LSZH) jacket in yellow colour 900μm tight buffer OS1/OS2 cabled fibre conforms to ITU-T G.652D, TIA/EIA 492 CAAB or ITU-T G.657A1 Simplex and duplex assemblies Duplex assemblies available with clips (SC and LC) Different connector performance range for specific application available Armoured option also available REACH, RoHS & SvHC materials compliant Applications CATV / VIDEO Passive Optical Network PON WDM / DWDM FTTH Data centres - Support high speed multi channel video, data and voice services in metropolitan and access networks ATM, SONET and WDM Premise / Data Environments Connector Specificatio Optical Performance Singlemode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master* 0.18 db IEC 61300-3-4 Ave/Random* 0.18 db IEC 61300-3-34 Return Loss 55/65 db IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db / km) Chromatic Dispersion (ps/nm x km) Cable Specificatio 0.38 @ 1310nm / 0.25 @ 1550nm 3.0 @ 1310nm / 18.0 @ 1550nm Characteristics Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush (N) 1000 1000 Operating Temperature ( C) -20 to 60-20 to 60 Fire Specificatio IEC 60332-1...for part number generator see page 16 FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 11 62.5/125 (OM1) Optical Fibre Patch Cords For Premise / Data Environments Multimode patch cords are used to connect high speed and legacy networks like gigabit ethernet, fast ethernet and ethernet. The multimode patch cords are manufactured using LSZH cables which conform to IEC, EIA TIA or Telcordia standards. The OM1 patch cords are terminated with standard connectors which give optimum optical performance. Features SC, LC, ST, FC and MTRJ connectors Low smoke zero halogen (LSZH) cable in orange colour 900μm / 600µm tight buffer OM1 fibre conforms to TIA/EIA 492AAAA, IEC60793-2-10 A1b Simplex and duplex assemblies Duplex assemblies available with clips (SC and LC) Different connector performance range for specific application Armoured option also available REACH, RoHS & SvHC materials compliant Applications Gigabit Ethernet in high speed LAN networks over an indicative 275m link length at 850 nm (SX) wavelength Legacy networks including Ethernet, Fast Ethernet and FDDI Data centres Premises cabling in data networks including backbone, riser and horizontal Supports video, data and voice services Connector Specificatio Optical Performance Singlemode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master* 0.15 db IEC 61300-3-4 Ave/Random* 0.20 db IEC 61300-3-34 Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db) / km Bandwidth OFL (MHz x km) Cable Specificatio 3.0 @ 850nm / 0.8 @1300nm 200 @ 850nm / 500 @1300nm Characteristics Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush (N) 1000 1000 Operating Temperature ( C) -20 to 60-20 to 60 Fire Specificatio IEC 60332-1...for part number generator see page 16 Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

12 Premise Data Environments Central Office Telcom Data Centres Specialist Application 50/125 (OM2) Optical Fibre Patch Cords For Premise / Data Environments Multimode patch cords are used to connect high speed and legacy networks like gigabit ethernet, fast ethernet and ethernet. Multimode patch cords are manufactured using LSZH cable and conform to IEC, EIA TIA or Telcordia standards. OM2 patch cords are terminated with standard connectors giving optimum optical performance. Features FC, LC, MTRJ, SC and ST connectors Low smoke zero halogen (LSZH) cable in orange colour 900 μm / 600 μm tight buffer OM2 fibre conforms to ITU-T G.651.1, TIA/EIA 492AAAB, IEC60793-2-10 A1a.1a Simplex and duplex assemblies options SC and LC duplex assemblies available with clips Higher optical performance available on request Armoured option also available REACH, RoHS & SvHC materials compliant Applications For use in 1 Gb/s high speed LAN networks over a 550 m indicative link length at 850 nm wavelength using a laser launch High speed and legacy networks including Gigabit Ethernet, Fast Ethernet and Ethernet Data centres Premises cabling in data networks including backbone, riser and horizontal Supports video, data and voice services Premise / Data Environments Connector Specificatio Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master* 0.15 db IEC 61300-3-4 *MTRJ - 0.4 db Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db / km) Bandwidth OFL (MHz x km) Cable Specificatio 2.8 @ 850nm / 0.8 @1300nm 500 @ 850nm / 500 @1300nm Characteristics Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush (N) 1000 1000 Operating Temperature ( C) -20 to 60-20 to 60 Fire Specificatio IEC 60332-1...for part number generator see page 16 FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 13 50/125 (OM3) Optical Fibre Patch Cords For Premise / Data Environments Multimode patch cords are used to connect high speed and legacy networks like 10 gigabit ethernet, fast ethernet and ethernet. The multimode patch cords are manufactured using LSZH cables which conform to IEC, EIA TIA or Telcordia standards. The OM3 patch cords are terminated with standard connectors which gives optimum optical performance. Features FC, LC, MTRJ, SC and ST connector Low smoke zero halogen (LSZH) cable in aqua or purple colour 900 μm / 600 μm tight buffer OM3 fibre conforms to ITU-T G.651.1, TIA/EIA 492AAAC, IEC60793-2-10 A1a.2a Simplex and duplex assemblies Duplex assemblies available with clips (SC and LC) Different connector performance range for specific application available Armoured option also available REACH, RoHS & SvHC materials compliant Applications For use in 10Gb/s high speed LAN networks over a 300m indicative link length at 850nm (SX) wavelength using a laser launch For use in 1Gb/s high speed LAN networks over a 1000m indicative link length at 850nm (SX) wavelength using a laser launch High speed and legacy networks including Gigabit Ethernet, Fast Ethernet and Ethernet Data centres Premises cabling in data networks including backbone, riser and horizontal Supports video, data and voice services Connector Specificatio Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master* 0.15 db IEC 61300-3-4 Ave/Random* 0.20 db IEC 61300-3-34 Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db / km) Bandwidth OFL (MHz x km) Bandwidth LEMB (MHz x km) Cable Specificatio 2.8 @ 850nm / 0.8 @1310nm 1500 @ 850nm / 500 @1310nm 2000 @ 850nm Characteristics Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush (N) 1000 1000 Operating Temperature ( C) -20 to 60-20 to 60 Fire Specificatio IEC 60332-1...for part number generator see page 16 Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

14 Premise Data Environments Central Office Telcom Data Centres Specialist Application 50/125 (OM4) Optical Fibre Patch Cords For Premise / Data Environments Description Multimode patch cords are used to connect high speed and legacy networks like 10/40/100 gigabit ethernet, fast ethernet and ethernet. Multimode patch cords are manufactured using LSZH cable and conform to Telcordia, EIA TIA or IEC standards. The OM4 patch cords are terminated with standard connectors which gives optimum optical performance. Features FC, LC, MTRJ, SC, and ST connectors Low smoke zero halogen (LSZH) cable in aqua or erika violet colour 900 μm / 600 μm tight buffer OM4 fibre conforms to ITU-T G.651.1, TIA/EIA 492AAAD, IEC60793-2-10 A1a.3a Simplex and duplex assemblies options SC and LC duplex assemblies available with clips Higher optical performance available on request Armoured option also available REACH, RoHS & SvHC materials compliant Applications For use in 10Gb/s high speed LAN networks over a 400m indicative link length at 850nm (SX) wavelength using a laser launch For use in 1Gb/s high speed LAN networks over a 1000m indicative link length at 850nm (SX) wavelength using a laser launch High speed and legacy networks including Gigabit Ethernet, Fast Ethernet and Ethernet Data centres Premises cabling in data networks including backbone, riser and horizontal Supports video, data and voice services Premise / Data Environments Connector Specificatio Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master* 0.15 db IEC 61300-3-4 Ave/Random* 0.20 db IEC 61300-3-34 Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db/ km) Bandwidth OFL (MHz x km) Bandwidth LEMB (MHz X km) Cable Specificatio 2.8 @ 850nm / 0.8 @1310nm 3500 @ 850nm / 500 @1310nm 4700 @ 850nm Characteristics Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush (N) 1000 1000 Operating Temperature ( C) -20 to 60-20 to 60 Fire Specificatio IEC 60332-1...for part number generator see page 16 FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 15 E2000 Patch Cords For Premise / Data Environments Description Our E2000 range of patch cords are suitable for telecom, datacom, data centre and some critical applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. The patch cords are manufactured using LSZH cables which conform to IEC, EIA TIA or Telcordia standards. The patch cords are terminated with standard range physical contact (singlemode & multimode) and angled physical contact (singlemode) zirconia ferrule connectors which are manufactured with precision factory mounting and polishing techniques which helps assure high transmission quality. Features E2000 and E2000 APC connectors with metal shutter Available in different fibre types including OS1/OS2 - G.652D or G657A1, G.657A2, OM1, OM2, OM3 or OM4 Low smoke zero halogen (LSZH) jacket colour coded to identify the optical fibre type Available as hybrid patch cords with different connector types including FC, LC, SC or ST Available in standard and custom lengths REACH, RoHS & SvHC materials compliant Applications Telecommunication networks CATV LAN and WAN FTTX Broadband Network Data Centre Connector Specificatio Optical Performance SingleMode Multimode Conformance IL Max/Master (Acceptance) 0.3 db 0.3 db IEC 61300-3-4 Ave/Master* 0.15 db 0.15 db IEC 61300-3-4 Return Loss 55/65 db - IEC 61300-3-6 Cable Specificatio Characteristics Units Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush (N) N 1000 1000 Operating Temperature ( C) C -20 to 60-20 to 60 Secondary Buffer Diameter (2.0mm and 3.0mm) Minimun Bending Radius μm 900+50 900+50 10D (installed) 20D (loaded) 10D (installed) 20D (loaded)...for part number generator see page 16 Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

16 Premise Data Environments Central Office Telcom Data Centres Specialist Application Patch Cord Part Number Generator For Premise / Data Environments Part Number Generator Connector End A Connector End B Mode Cable Configuratio Cable Colour Length FC FC FC FC OS1/OS2 G.652D 09 Simplex LSZH S Yellow YE 1 Mtr 1 FCA/APC FCA FCA/APC FCA OM1 62 SC SC SC SC OM2 50 Duplex LSZH Flat Duplex D Orange OR 2 Mtr 2 FD Grey GY 3 Mtr 3 SC/APC SCA SC/APC SCA OM3 OM3 Purple PU 5 Mtr 5 ST ST ST ST OM4 OM4 Aqua AQ 10 Mtr 10 LC LC LC LC G657A1 7A1 LC/APC LCA LC/APC LCA MU MU MU MU Erika violet EV xx* Mtr XX *Other lengths available 1 MTRJ is only available in MiniZip MTRJ 1 MTRJ MTRJ 1 MTRJ E2000 E2 E2000 E2 Premise / Data Environments Example Part Number: Patch cord cables are available with alternative jacket materials including PVC, UL listed riser or plenum and polyurethane. Other connectors avialable on request including DIN, DIN/APC, FDDI, SMA, ST/APC FC FC 09 S YE 1 FCFC09SYE1 will configure an OS1/OS2 FC-FC simplex patch cord, 1 metre - Yellow DID YOU KNOW? FibreFab also offers an extensive range network infrastructure components including pre-terminated assemblies, patch panels, cabling and cabinets Visit www.fibrefab.co for more details. FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 17 Premium Patch Cords For Premise / Data Environments Description Our premium low loss range of patch cords are suitable for telecom, datacom, data centre and some critical applications. The patch cords provide fl xible interconnection to active equipment, passive optical devices and cross-connects. The patch cords are terminated with premium range physical contact (singlemode & multimode) and angled physical contact (singlemode) zirconia ferrule connectors which are manufactured with precision factory mounting and polishing techniques which helps assure high transmission quality. Features / Benefit Conform to IEC, EIA-TIA or Telecordia performance requirements Available in different fibre types Available with different connector types Available in standard and custom lengths REACH & SvHC compliant, materials compliant to RoHS2 Applications Data centre Telecommunication networks CATV LAN and WAN FTTX Broadband network Yellow Orange Aqua See our Data Centre catalogue for a complete range of infrastructure products Purple Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

18 Premise Data Environments Central Office Telcom Data Centres Specialist Application Premium Patch Cords For Premise / Data Environments Connector Specificatio Optical Performance Singlemode Multimode Conformance IL MAX/ Master (Acceptance) 0.15 db 0.15 db IEC 61300-3-4 Ave/Master* 0.12 db 0.08 db IEC 61300-3-4 Ave/Random* 0.12 db 0.10 db IEC 61300-3-34 Return Loss 55/65 db - IEC 61300-3-6 MECHANICAL PROPERTIES CRITERIA* CONFORMANCE Mechanical endurance 500 matings IEC 61300-2-2 Vibration 10-55 Hz, 0.75 amplitude IEC 61300-2-1 Drop Drop height 1m, 5 drops IEC 61300-2-12 Cable retention Magnitude 50 N IEC 61300-2-4 Cable torsion 1.5 kg - 2.5 kg for 2mm-3mm cable diameter IEC 61300-2-5 * The change in attenuation for all the above listed criteria shall be a maximum of 0.20dB Connector Type Conformance Singlemode Multimode SM Duplex MM Duplex SC connector IEC 61754-4 LC connector IEC 61754-20 SM PC- Blue APC-Green SM PC- Blue APC-Green Boot-White MM PC- Beige MM PC- Beige Boot-White SM PC- Blue APC-Green with clips SM PC- Blue APC-Green with clips Boot-White MM PC- Beige with clips Boot -Red & Black MM PC- Beige with clips Boot-White ST connector IEC 61754-2 SM PC- Yellow boot MM PC- Black boot SM PC- Yellow boot MM PC- Red & Black boot FC connector IEC 61754-13 SM PC- Blue boot APC-Green boot MM PC- Black boot SM PC- Blue boot APC-Green boot MM PC- Black boot Premise / Data Environments Please note that the LC 2mm connectors will have heat shrinks to serve the purpose of cable retention. C clips will be provided for channel identification of duplex FC and ST Patch Cords. Cable Specificatio Characteristics Units Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush N 1000 1000 Operating Temperature C -20 to +60-20 to +60 Secondary Buffer Diameter (2.0mm, 2.4mm and 3.0mm) µm 900±50 900±50 Secondary Buffer Diameter (1.6mm and 1.8mm) µm 600±50 600±50 Minimum Bending Radius mm 10D (installed) 20D (loaded) 10D (installed) 20D (loaded) The Patch Cords are available in standard length of 1m, 2m, 3m, 5m, and 10m. For other lengths please contact us for the actual lead times. Standards Compliance TIA/EIA 568C TIA/EIA 492AAAP IEC11801 FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 19 Part Number Generator -P Connector End 1 Connector End 2 Cable Type Cable Configuratio Cable Colour Length (m) FC FC FC FC OS1/2 09 Yellow YE 1 Simplex S LSZH FC/APC FCA FC/APC FCA OM1 62 Orange OR 2 SC SC SC SC OM2 50 Aqua AQ 3 Duplex D LSZH SC/APC SCA SC/APC SCA OM3 OM3 Purple PU 5 LC LC LC LC OM4 OM4 Flat Duplex FD Erika Violet 1 EV 1 10 LC/APC LCA LC/APC LCA G.657.A1 7A1 1 OM4 Only xx E2000 E2 E2000 E2 G.657.A2 7A2 E2000/APC E2A E2000/APC E2A Example Part Number: SC SC OM4 D AQ 2 P SCSCOM4DAQ2P will configure a 2 metre SC to SC OM4 duplex premium patch cord with an aqua jacket Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

20 Premise Data Environments Central Office Telcom Data Centres Specialist Application 9/125 (Singlemode) Optical Fibre Pigtails For Premise / Data Environments Description Single mode pigtails are used in telecom, datacom networks and also used for high speed metropolitan and access network. The single mode pigtail buffer conforms to IEC, EIA TIA or Telcordia standards. The single mode pigtails are terminated with standard connectors which gives optimum optical performance. Features SC, LC, ST and FC Connectors UPC and APC interface Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip structure OS1/OS2 optical fibre conforms to TU-G652.D, TIA/EIA 492 CAAA OS1/OS2 bend insensitive optical fibre conforms to ITU-G657.A1 or A2 Different connector performance range for specific application Available in standard white colour buffer and also in standard 12 colours as per IEC 60304 Available in standard and blister packing REACH, RoHS & SvHC materials compliant Applications Telcom and datacom application Patch panels, wall boxes, ODFs and splice cassettes Easy strip pigtails for on site installation Supports high speed multi channel video, data and voice services in metropolitan and access networks ATM, SONET and WDM SC FC LC Premise / Data Environments Connector Specificatio Optical Performance Singlemode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master* 0.18 db IEC 61300-3-4 Ave/Random* 0.18 db IEC 61300-3-34 Return Loss 55/65 db IEC 61300-3-6 Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900 +/- 50 Max Tensile Load N 6 E2000 ST Bag Packed Blister Packed FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 21 Technical information For Premise / Data Environments Part Number Generator B Connector Mode Length Cable Construction and Packaging Style SC SC OS1/2 09 1 Mtr 1 Tight Buffer Leave Blank SCA SCA G.657.A1 A1 2 Mtr 2 LC LC G.657.A2 A2 Tight Buffer Pack of 12 Tight Buffer Blister pack of 12 12/1B BP12-TB LCA LCA Easy Strip EASY FC FC Easy Strip pack of 12 E-12/1B FCA FCA Easy Strip Blister pack of 12 BP12 ST ST E2000* E2 E2000 APC* E2A Example Part Number: LC 09 B 1 * Insertion Loss < =0.3dB LC09B1 will configure a 1 metre LC OS1/2 tight buffered pigtail Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

22 Premise Data Environments Central Office Telcom Data Centres Specialist Application 62.5/125 (OM1) Optical Fibre Pigtails For Premise / Data Environments Description OM1 multimode pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet. The multimode pigtail buffer conforms to IEC, EIA TIA or Telcordia standards. The multimode pigtails are terminated with standard connector which gives optimum optical performance. Features SC, LC, ST, FC connectors Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip OM1 pigtail is available in standard white colour Multimode fibre conforms to TIA/EIA 492AAAA Different connector performance range for specific application Available in standard 12 colours as per IEC 60304 Available in standard and blister packing REACH, RoHS & SvHC materials compliant Applications Networks including Ethernet, Fast Ethernet and Giga Bit Ethernet Internal inter-connect Ideal for a wide range of telcom, datacom and process control applications where ruggedisation is required Suitable for repeated handling in patch panels and racks Premise / Data Environments Connector Specificatio Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master 0.15 db IEC 61300-3-4 Ave/Random 0.20 db IEC 61300-3-34 Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db / km) 3.0 @ 850nm / 0.8 @ 1300nm Bandwidth OFL (MHz x km) 200 @ 850nm / 500 @ 1300nm Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900+/- 50 Max Tensile Load N 6 fc sc lc st Bag Packed Blister Packed FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 23 Technical information For Premise / Data Environments Part Number Generator B Connector Mode Length Cable Construction and Packaging Style SC SC OM1 62 1 Mtr 1 Tight Buffer Leave Blank LC LC 2 Mtr 2 Tight Buffer Pack of 12 12/1B FC FC Tight Buffer Blister pack of 12 BP12-TB ST ST Easy Strip EASY Easy Strip pack of 12 Easy Strip Blister pack of 12 E-12/1B BP12 Example Part Number: LC 62 B 1 LC62B1 will configure a 1 metre LC OM1 tight buffered pigtail See our Fibre Optic Connectors and Adaptors catalogue for our complete range Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

24 Premise Data Environments Central Office Telcom Data Centres Specialist Application 50/125 (OM2) Optical Fibre Pigtails For Premise / Data Environments Description OM2 multimode pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet. The multimode pigtail buffer conforms to IEC, EIA TIA or Telcordia standards. The multimode pigtails are terminated with standard connector which gives optimum optical performance. Features SC, LC, ST, FC connectors Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip OM2 pigtail is available in standard white colour Multimode fibre conforms to ITU-G651, TIA/EIA 492AAAA Different connector performance range for specific application Available in standard 12 colours as per IEC 60304 Available in standard and blister packing REACH, RoHS & SvHC materials compliant Applications Networks including Ethernet, Fast Ethernet and GBE Internal inter-connect Ideal for a wide range of telcom, datacom and process control applications where ruggedisation is required Suitable for repeated handling in patch panels and racks Premise / Data Environments Connector Specificatio Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master 0.15 db IEC 61300-3-4 Ave/Random 0.20 db IEC 61300-3-34 Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db / km) 2.8 @ 850nm / 0.8 @1310nm Bandwidth OFL (MHz x km) 500 @ 850nm / 500 @1310nm Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900+50 Max Tensile Load N 6 fc sc lc st Bag Packed Blister Packed FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 25 Technical information For Premise / Data Environments Part Number Generator B Connector Mode Length Cable Construction and Packaging Style SC SC OM2 50 1 Mtr 1 Tight Buffer Leave Blank LC LC 2 Mtr 2 Tight Buffer Pack of 12 12/1B FC FC Tight Buffer Blister pack of 12 BP 12-TB ST ST Easy Strip EASY Easy Strip pack of 12 Easy Strip Blister pack of 12 E-12/1B BP12 Example Part Number: LC 50 B 1 LC50B1 will configure a 1 metre LC OM2 tight buffered pigtail Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

26 Premise Data Environments Central Office Telcom Data Centres Specialist Application 50/125 (OM3) Optical Fibre Pigtails For Premise / Data Environments Description OM3 multimode pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet. The multimode pigtail buffer conforms to IEC, EIA TIA or Telcordia standards. The multimode pigtails are terminated with standard connector which gives optimum optical performance. Features SC, LC, ST, FC connectors Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip OM3 pigtail is available in standard purple or aqua colour Multimode fibre conforms to ITU-G651, TIA/EIA 492AAAA Different connector performance range for specific application Available in packs of 12 standard colours as per IEC 60304 Available in standard and blister packing REACH, RoHS & SvHC materials compliant Applications Networks including Ethernet, Fast Ethernet and GBE Internal inter-connect Ideal for a wide range of telcom, datacom and process control applications where ruggedisation is required Suitable for repeated handling in patch panels and racks Premise / Data Environments Connector Specificatio Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master 0.15 db IEC 61300-3-4 Ave/Random 0.20 db IEC 61300-3-34 Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db / km) 2.8 @ 850nm / 0.8 @ 1300nm Bandwidth OFL (MHz x km) 1500 @ 850nm / 500 @ 1300nm Bandwidth EMBc (MHz xkm) 2000 @ 850nm Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900+50 Max Tensile Load N 6 fc sc lc st Bag Packed Blister Packed FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 27 Technical information For Premise / Data Environments Part Number Generator B Connector Mode Length Cable Construction and Packaging Style SC SC OM3 OM3 1 Mtr 1 Tight Buffer Leave Blank LC LC 2 Mtr 2 Tight Buffer Pack of 12 12/1B FC FC Tight Buffer Blister pack of 12 BP12-TB ST ST Easy Strip EASY Easy Strip pack of 12 Easy Strip Blister pack of 12 E-12/1B BP12 Example Part Number: LC OM3 B 1 DID YOU KNOW? LCOM3B1 will configure a 1 metre LC OM3 tight buffered pigtail FibreFab also manufacture a wide variety of cabling assembly solutions....for more information visit www.fibrefab.co Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

28 Premise Data Environments Central Office Telcom Data Centres Specialist Application 50/125 (OM4) Optical Fibre Pigtails For Premise / Data Environments Description OM4 multimode pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet. The multimode pigtail buffer conforms to IEC, EIA TIA or Telcordia standards. The multimode pigtails are terminated with standard connector which gives optimum optical performance. Features SC, LC, ST, FC connectors Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip OM4 pigtail is available in standard aqua colour Multimode fibre conforms to ITU-G651, TIA/EIA 492AAAA Different connector performance range for specific application Available in standard 12 colours as per IEC 60304 Available in standard and blister packing REACH, RoHS & SvHC materials compliant Applications Networks including Ethernet, Fast Ethernet and GBE Internal inter-connect Ideal for a wide range of telcom, datacom and process control applications where ruggedisation is required Suitable for repeated handling in patch panels and racks Premise / Data Environments Connector Specificatio Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25 db IEC 61300-3-4 Ave/Master 0.15 db IEC 61300-3-4 Ave/Random 0.20 db IEC 61300-3-34 Note: Return Loss >28dB based on sample data using method IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db / km) 2.8 @ 850nm / 0.8 @ 1300nm Bandwidth OFL (MHz x km) 3500 @ 850nm / 500 @ 1300nm Bandwidth EMBc (MHz x km) 4700 @ 850nm Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900+50 Max Tensile Load N 6 fc sc lc st Bag Packed Blister Packed FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 29 Technical information For Premise / Data Environments Part Number Generator B Connector Mode Length Cable Construction and Packaging Style SC SC OM4 OM4 1 Mtr 1 Tight Buffer Leave Blank LC LC 2 Mtr 2 Tight Buffer Pack of 12 12/1B FC FC Tight Buffer Blister pack of 12 BP12-TB ST ST Easy Strip EASY Easy Strip pack of 12 Easy Strip Blister pack of 12 E-12/1B BP12 Example Part Number: LC OM4 B 1 LCOM4B1 will configure a 1 metre LC OM4 tight buffered pigtail Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

30 Premise Data Environments Central Office Telcom Data Centres Specialist Application Semi-Tight Buffer Pigtails For Premise / Data Description Pigtails are used in a wide range of communication networks. The semi tight buffer meets a need in the marketplace for pigtails that are suitable for use in fusion splicers, but can be easily stripped to longer lengths than tight buffer pigtails. Features Semi-tight 900um buffer can be stripped up to 100mm in one pass Suitable for splicing SC, LC, ST and FC connectors available Low smoke zero halogen (LSZH) secondary buffer Multimode fibre conforms to ITU-G651, TIA/EIA 492AAAA Available in standard singlemode and multimode fibre types Packs of 12 IEC 60304 colour pigtails available on request REACH, RoHS & SvHC materials compliant Applications Telecom and datacom application Patch panels, wall boxes, ODFs and splice cassettes Easy to strip for on site installation Supports high speed multi channel video, data and voice services in Metropolitan and access networks ATM, SONET and WDM Premise / Data Environments Connector Specificatio Optical Performance Singlemode Multimode Conformance IL Max/Master (Acceptance) 0.25 db 0.25 db IEC 61300-3-4 Ave/Master 0.18 db 0.15 db IEC 61300-3-4 Ave/Random 0.18 db 0.20 db IEC 61300-3-34 Note: Multimode Return Loss >28dB based on sample data using method IEC 61300-3-6 Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900 + 50 Max Tensile Load N 6 Connector Fibre Type SC SC OS1/2 09 SCA SCA OM1 62 LC LC OM2 50 LCA LCA OM3 OM3 FC FC Example Part Number: SC OM1 B 5 S SCOM1B5S will configure a 5 metre SC OS1 Semi tight buffer pigtail B 1 Mtr 2 Mtr 3 Mtr 5 Mtr 10 Mtr Cable Length FCA FCA xx Specify ST ST 1 2 3 5 10 Cable Construction Semi Tight buffer S FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Application 31 Cabled Pigtails For Premise / Data Environments Description Cabled pigtails use a ruggedised 2 or 3mm jacket that allows more robust handling while still being suitable for splicing or field termination. Our cabled pigtails are manufactured according to IEC, EIA/TIA or Telecordia standards and are used for telecom networks, high speed metropolitan and access network. Features Can be fed through tight spaces and spliced or terminated Does not need to be protected inside a panel Wide range of connector and fibre options available Tight Buffer 900µm buffer internal construction as standard (Easy Strip available on request) Standard cable diameters are 2mm (LC and MU) and 3mm (SC, ST and FC) Other cable diameters and fibre types available on request REACH, RoHS & SvHC materials compliant Applications Telecom and datacom application Patch panels, wall boxes, ODFs and splice cassettes Easy to strip for on site installation Supports high speed multi channel video, data and voice services in Metropolitan and access networks ATM, SONET and WDM Connector Specificatio Optical Performance Singlemode Multimode Conformance IL Max/Master (Acceptance) 0.25 db 0.25 db IEC 61300-3-4 Ave/Master 0.18 db 0.15 db IEC 61300-3-4 Ave/Random 0.18 db 0.20 db IEC 61300-3-34 Note: Multimode Return Loss >28dB based on sample data using method IEC 61300-3-6 Cable Specificatio Characteristics Units Simplex Cable Material LSZH Strength Member Aramid Crush N 1000 Operating Temperature C -20 to 60 Fire Specificatio IEC 60332-1 Connector Mode Cable Configuration Example Part Number: FC OM1 S YE 2 FCOM1SYE2 will configure a 2 metre FC OM1 Cabled pigtail in Yellow Cable Colour Cable Length FC FC OS1/2 09 Simplex S Yellow YE 1 Mtr 1 FC/ APC FCA G.657A1 7A1 Duplex D Orange OR 2 Mtr 2 SC SC G.657A2 7A2 SC/ APC SCA OM1 OM1 Flat Duplex FD Aqua AQ 3 Mtr 3 Erika Violet EV 5 Mtr 5 ST ST OM2 OM2 10 Mtr 10 LC LC OM3 OM3 Specify xx LCA LCA OM4 OM4 MU MU...for more information visit www.fibrefab.co Premise / Data Environments VISIT US ONLINE NOW WWW.FIBREFAB.COM

Central Office / Telco Telcom Patch Cords 34 OS1/OS2 G657 LC & SCShort Boot Patch Cords 36 9/125 Telcom Pigtails 38 Attenuated Patch Cords 40 OS1 / OS2 OM1, OM2, OM3, OM4 Pigtails Patch Cords

34 Premise Data Environments Central Office Telco Data Centres Specialist Applications Telecom Patch Cords For Central Office / Telco Description Our telecom range of patch cords are designed for low loss telecommunication applications. The patch cords provide flexible interconnection to active equipment, passive optical devices and crossconnects. The patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss. Features / Benefit Enhanced optical performance to meet tight telecom power budgets Flexible boot allows connection in compact spaces Standard LC and SC connector types Standard and bend insensitive Singlemode Fibre types, G652D, G657 A1, G657 A2 Cable available with IEC 60332-3-24 fire performanc Available in standard and custom lengths IEC, EIA/TIA ortelecordia compliant RoHS materials, REACH and SvHC compliant Applications Telecom High Bandwidth Ethernet and Fibre Channel Storage Area Networks (SANs) Connector Specificatio Central Office / Telco Optical Performance Singlemode Conformance IL Max/Master (Acceptance) 0.15 db IEC 61300-3-4 Ave/Master 0.12 db IEC 61300-3-4 Ave/Random 0.12 db IEC 61300-3-34 Return Loss UPC/APC 55/65 db IEC 61300-3-6 Mechanical Properties Value Conformance Mechanical endurance 500 matings IEC 61300-2-2 Vibration 10-55 Hz, 0.75 amplitude IEC 61300-2-1 Drop 5 drops at 1m IEC 61300-2-12 Cable retention 50N IEC 61300-2-4 Cable torsion 1.5kg-2.5kg for 2mm-3mm cable diameter IEC 61300-2-5 Connector Type Conformance Singlemode Singlemode Duplex SC Connector IEC 61754-4 LC Connector IEC 61754-20 SM PC Blue, Blue Boots APC Green, Green Boots SM PC Blue, White Boots APC Green, White Boots SM PC Blue, Blue Boots APC Green, Green Boots SM PC Blue, White Boots APC Green, White Boots LOW LOSS 0.15 db INSERTION LOSS HIGHER FIRE PERFORMANCE JACKET AVAILABLE FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telco Data Centres Specialist Applications 35 Technical information For Central Office / Telco Cable Specificatio LC Simplex with RBS Bellcore Style Boot 21.60 39.60 Technical Specificatio Characteristics Cable Material Strength Member LSZH* Aramid Crush (N) 1000 Operating Temperature ( C) -20 to 60 Fire Specificatio IEC 60332-1 Secondary Buffer Diameter (2.0mm) μm 900±50 LC Simplex with Short Bellcore Style Boot Secondary Buffer Diameter (1.6mm and 1.8mm) μm 600±50 Minimum Bend Radius (mm) 10D (installed) - 20D (loaded) *Also available in OFNR LC Simplex with Standard Boot and Heatshrink 21.60 21.60 49.60 Flex Boot 63.60 50.20 Standard Boot Part Number Generator - TC Connector End A Connector End B Cable type Cable Configuratio Cable Colour Cable Diameter Cable Length LC LC LC LC OS1/OS2 09 Duplex LSZH D Yellow YE 1.6mm 1.6MM 1m 1 LC APC LCA LC APC LCA G.657.A1 7A1 Simplex LSZH S 1.8mm 1.8MM 2m 2 LC Short Boot LCS LC Short Boot LCS G657.A2 7A2 Duplex LSZH-3 DL 2.0mm 2.0MM 3m 3 SC SC SC SC Simplex LSZH-3 SL 5m 5 SC APC SCA SC APC SCA 10m 10 Example Part Number: LCS LC 7A1 D YE 1.6MM 1 LCSLC7A1DYE1.6MM-TC will configure a 1 metre LC duplex Patch cord made with 1.6mm zip cable G.657.A1 XX*m XX *Other lengths available Central Office / Telco VISIT US ONLINE NOW WWW.FIBREFAB.COM

36 Premise Data Environments Central Office Telco Data Centres Specialist Applications OS1/OS2 G657 LC & SC Short Boot Patch Cords For Central Office / Telco LC patch cords supplied with a short boot are ideal for high density applications with tight space requirements. The connector length from tip to boot assembly is only 40 mm, compared to 66 mm for standard LC 40% shorter! These patch cords have the added benefit of being supplied with reduced bend sensitivity ITU-T G657 singlemode optical fibre which exhibit much lower optical power loss under bend conditions while remaining compatible with conventional cabling. LC short boot patch cords are designed to meet IEC, EN or Telcordia GR 326 requirements. Our SC patch cords supplied with a short boot are ideal for high density applications with tight space requirements. The connector length from tip to boot assembly is only 42 mm, compared to 57 mm for standard SC 35% shorter! These patch cords have the added benefit of being supplied with reduced bend sensitivity ITU-T G657 singlemode optical fibre which exhibit much lower optical power loss under bend conditions while remaining compatible with conventional cabling. SC short boot patch cords are designed to meet IEC and BS EN requirements. Features Short length allows up to 40 mm space between rack and closed cabinet door Enhanced flexibility of the boot maintains minimum bend radius Cable dimensions of 2.0mm, 1.8mm, 1.6mm for optimising air flow space Low Loss premium performance Applications Central Offic Passive Optical Networks (PON) FTTx CATV / VIDEO WDM / DWDM Data centers LAN and WAN Connector Specificatio Fibre Specificatio Characteristics Attenuation (db / km) Chromatic Dispersion (ps/nm x km) 0.38 @ 1310nm / 0.25 @ 1550nm 3.0 @ 1310nm / 18.0 @ 1550nm Central Office / Telco Optical Performance LC SC Conformance IL Max/Master (Acceptance) 0.15 db 0.25 db IEC 61300-3-4 Ave/Master 0.12 db 0.18 db IEC 61300-3-4 Ave/Random 0.12 db 0.18 db IEC 61300-3-34 Return Loss UPC/APC 55/65 db IEC 61300-3-6 Cable Specificatio LC Simplex with RBS Bellcore Style Boot Characteristics Simplex/Duplex Cable Material* LSZH Strength Member Aramid Crush (N) 1000 Operating Temperature ( C) -20 LC to Simplex 60 with Standard Boot and Heatshrink Fire Specificatio IEC 60332-1 * OFNR also available 21.60 21.60 39.60 Short Boot 63.60 50.20 Standard Boot HIGHER FIRE PERFORMANCE JACKET AVAILABLE LC Bel FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telco Data Centres Specialist Applications 37 Technical Information For Central Office / Telco 25mm Part Number Generator -P Connector End A Connector End B Cable type Cable Configuratio Cable Colour Cable Diameter Cable Length LC Short Boot LCS LC Short Boot LCS G.657.A1 7A1 Duplex LSZH D Yellow YE 1.6mm 1.6MM 1m 1 LC/APC Short Boot LCAS LC/APC Short Boot Example Part Number: LCAS G657.A2 7A2 LC LC G657.B3 7B3 LC/APC FC LCA FC Simplex LSZH Duplex LSZH-3 Simplex LSZH-3 Flat Duplex S 1.8mm 1.8MM 2m 2 DL 2.0mm 2.0MM 3m 3 SL 5m 5 FD 10m 10 FC/APC FCA XX*m XX SC SC/APC ST SC SCA ST LCS LC 7A1 D YE 1.6MM 1 LCSLC7A1DYE1.6MM-TC will configure a 1 metre LC duplex Patch cord made with 1.6mm zip cable G.657.A1 RBS with short boot at one end *Other lengths available Central Office / Telco VISIT US ONLINE NOW WWW.FIBREFAB.COM

38 Premise Data Environments Central Office Telco Data Centres Specialist Applications 9/125 Telcom Pigtails For Central Office / Telco Single mode pigtails are used in telecom, datacom networks and also used for high speed metropolitan and access network. The single mode pigtail buffer conforms to IEC, EIA TIA or Telcordia standards. The single mode pigtails are terminated with low loss premium connectors which gives optimum optical performance. Features SC, LC, ST and FC Connectors UPC and APC Connectors Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip structure OS1/OS2 optical fibre conforms to ITU-G652.D, TIA/EIA 492 CAA OS1/OS2 bend insensitive optical fibre conforms to ITU-G657.A1 or A Available in standard white colour buffer and also in standard 12 colours as per IEC 60304 Available in standard and blister packing RoHS materials, REACH and SvHC compliant Applications Telcom and datacom application Patch panels, wall boxes, ODFs and splice cassettes Easy strip pigtails for on site installation Supports high speed multi channel video, data and voice services in metropolitan and access networks ATM, SONET and WDM FC LC SC Central Office / Telco Connector Specificatio Optical Performance Singlemode Conformance IL Max/Master (Acceptance) 0.15 db IEC 61300-3-4 Ave/Master* 0.12 db IEC 61300-3-4 Ave/Random* 0.12 db IEC 61300-3-34 Return Loss 55/65 db IEC 61300-3-6 Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900 +/- 50 Max Tensile Load N 6 E2000 ST Bag Packed Blister Packed FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telco Data Centres Specialist Applications 39 Technical information For Central Office / Telco Part Number Generator B -TC Connector Mode Length Cable Construction and Packaging Style SC SC OS1/2 09 1 Mtr 1 Tight Buffer Leave Blank SCA SCA G.657.A1 7A1 2 Mtr 2 LC LC G.657.A2 7A2 Tight Buffer Pack of 12 Tight Buffer Blister pack of 12 12/1B 12BP LCA LCA Easy Strip EASY FC FC Easy Strip pack of 12 E-12/1B FCA FCA Easy Strip Blister pack of 12 E-12BP ST ST E2000 E2 E2000A E2A Example Part Number: LC 09 B 1 - -TC LC09B1TC will configure a 1 metre LC OS1/2 tight buffered pigtail See our Fibre Optic Connectors and Adaptors catalogue for our complete range Central Office / Telco VISIT US ONLINE NOW WWW.FIBREFAB.COM

40 Premise Data Environments Central Office Telco Data Centres Specialist Applications Attenuated Patch Cord For Central Office / Telco Description Our high performance attenuated patch cords are used to attenuate the optical signal in a link. They can be installed in place of conventional patch cords fixed attenuator combination to provide a constant level of attenuation with a return loss of >50 db. It is a compact, multipurpose passive device designed to operate at the 1310 and 1550nm wavelengths. They can be provided with various connector styles LC, SC, ST, MU and FC to meet customer requirements. The cable and connectors meet all relevant standards. Features & Benefit Provides the functions of attenuator and cable assembly simultaneously Low Back Reflectio 100% Insertion Loss Testing Connector varieties available Conforms to the requirements of EIA/TIA standards Applications Telecommunication Networks CATV LAN and WAN Attenuation values available: 01= 1dB, 02= 2dB, 03= 3dB, 04= 4dB, 05= 5dB 06= 6dB, 07= 7dB, 08= 8dB, 09= 9dB, 10= 10dB 15= 15dB, 20= 20dB Central Office / Telco Technical Specificatio Description Available Attenuation Attenuation Tolerance Back Reflectio Operating Wavelength Connectorization Length Fibre type 1.0 to 30 db with 1dB increments 1-10 db : ± 0.5 db; For >10 db : ± 10% of nominal value >50 db(upc) >60dB (APC) 1310 and 1550nm LC, SC, FC, ST & MU 1m, 2m Other lengths available on request Singlemode Also available LC Attenuator ST Attenuator SC Attenuator FC Attenuator FOR MORE INFORMATION CALL +44 (0) 1908 441144

Data Centres Data Centre Patch Cords 42 OM3/OM4 RBS LC Short Boot Patch Cords 44 msfp Mini LC Patch Cords 46 Uniboot Patch Cords 48 QuickFlip Reversible Polarity 50 OM3 OM4 Pigtails Patch Cords

42 Premise Data Environments Central Office Telcom Data Centres Specialist Applications Data Centre Patch Cords For Data Centres Description Our data Centre patch cords are designed for low loss data centre applications. They provide flexible interconnection to active equipment, passive optical devices and cross-connects. Our patch cords are terminated with premium grade zirconia ferrule connectors which help assure high transmission quality and low optical power loss. Features / Benefit LOW LOSS 0.15 db INSERTION LOSS Enhanced optical performance to meet tight data Centre power budgets New flexible boot allows connection in compact spaces Standard LC and SC connector types Standard and reduced bend sensitivity OM3, OM4 and OS2 fibre types Available in standard and custom lengths IEC, EIA/TIA ortelecordia compliant RoHS, REACH and SvHC compliant Applications Data Centers High Bandwidth Ethernet and Fibre Channel Storage Area Networks (SANs) Any critical network Connector Specificatio Optical Performance Singlemode Multimode Conformance IL Max/Master (Acceptance) 0.15 db 0.15 db IEC 61300-3-4 Ave/Master 0.12 db 0.08 db IEC 61300-3-4 Ave/Random 0.12 db 0.10 db IEC 61300-3-34 Return Loss 55/65 db >28dB IEC 61300-3-6 *Return Loss based on sample data Data Centres Mechanical Properties Value Conformance Mechanical endurance 500 matings IEC 61300-2-2 Vibration 10-55 Hz, 0.75 amplitude IEC 61300-2-1 Drop 5 drops at 1m IEC 61300-2-12 Cable retention 50N IEC 61300-2-4 Cable torsion 1.5kg-2.5kg for 2mm-3mm cable diameter IEC 61300-2-5 Connector Type Conformance Singlemode Multimode Singlemode Duplex Multimode Duplex SC Connector IEC 61754-4 LC Connector IEC 61754-20 SM PC Blue, Blue Boots APC Green, Green Boots SM PC Blue, White Boots APC Green, White Boots MM PC Aqua, Aqua Boots MM PC Aqua, White Boots SM PC Blue, Blue Boots APC Green, Green Boots SM PC Blue, White Boots APC Green, White Boots MM PC Aqua, Aqua Boots MM PC Aqua, White Boots FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 43 Technical information For Data Centres Cable Specificatio LC Simplex with RBS Bellcore Style Boot 21.60 39.60 Technical Specificatio Characteristics Cable Material Strength Member LSZH* Aramid Crush (N) 1000 Operating Temperature ( C) -20 to 60 Fire Specificatio IEC 60332-1 Secondary Buffer Diameter (2.0mm) μm 900±50 LC Simplex with Short Bellcore Style Boot Secondary Buffer Diameter (1.6mm and 1.8mm) 600±50 Minimum Bend Radius (mm) 10D (installed) - 20D (loaded) *Also available in OFNR LC Simplex with Standard Boot and Heatshrink 21.60 21.60 49.60 New Flexiable boot 63.60 50.20 Standard boot with heat shrink Part Number Generator - DC Connector End A Connector End B Cable type Cable Configuratio Cable Colour Cable Diameter Cable Length LC LC LC LC OS2 09 Duplex LSZH D Yellow YE 1.6mm 1.6MM 1m 1 LCAPC LCA LCAPC LCA G.657.A1 7A1 Simplex LSZH S Aqua AQ 1.8mm 1.8MM 2m 2 LC Short Boot LCS LC Short Boot LCS G657.A2 7A2 Duplex LSZH-3 DL Erika Violet EV 2.0mm 2.0MM 3m 3 SC SC SC SC OM3 OM3 Simplex LSZH-3 SL 5m 5 SC APC SCA SC APC SCA OM3 RBS RM3 10m 10 OM4 OM4 XX*m XX OM4 RBS RM4 Example Part Number: Patch cord cables are available with alternative jacket materials including PVC, UL listed riser or plenum and polyurethane. LCS LC RM3 D AQ 1.6MM 5 LCSLCRM3DAQ5-DC will configure a 5 metre LC duplex Patch cord made with 1.6mm zip cable OM3 RBS with short boot at one end *Other lengths available HIGHER FIRE PERFORMANCE JACKET AVAILABLE Data Centres VISIT US ONLINE NOW WWW.FIBREFAB.COM

44 Premise Data Environments Central Office Telcom Data Centres Specialist Applications OM3/OM4 RBS LC Short Boot Patch Cords For Data Centres Description LC patch cords supplied with a short boot are ideal for high density applications with tight space requirements. The connector length from tip to boot assembly is only 40mm, compared to 66mm for standard LC patch cords with heatshrink providing 40% more space. These patch cords have the added benefit of being supplied with reduced bend sensitivity OM3 or OM4 optical fibre which exhibits much lower optical power loss under bend conditions while remaining compatible with conventional cabling. LC short boot patch cords are designed to meet IEC, EN or Telcordia GR 326 requirements. Features Short length allows up to 40mm space between rack and closed cabinet door 25mm extra! Enhanced flexibility of the boot maintains minimum bend radius No heatshrink system improved cable flexibility Cable dimensions of 2.0mm, 1.8mm, 1.6mm for optimising air flow space Applications Data Centers FTTx Multi dwelling unit (MDU) LAN and WAN Connector Specificatio Optical Performance Multimodemode Conformance IL Max/Master (Acceptance) 0.15 db IEC 61300-3-4 Ave/Master 0.12 db IEC 61300-3-4 Ave/Random 0.12 db IEC 61300-3-34 Return Loss 28 db IEC 61300-3-6 Cable Specificatio LC Simplex with RBS Bellcore Style Boot 21.60 39.60 HIGHER FIRE PERFORMANCE JACKET AVAILABLE LC Si Bellc Data Centres Characteristics Simplex / Duplex Cable Material* LSZH Strength Member Aramid Crush (N) 1000 Operating Temperature ( C) -20 to 60 LC Simplex with Standard Fire Specificatio IEC Boot 60332-1 and Heatshrink * OFNR also available Fibre Specificatio Characteristics Attenuation (db / km) 2.8 @ 850nm / 0.8 @ 1300nm OM3 Bandwidth (MHz x km) 1500 @ 850nm / 500 @ 1300nm / 2000 @ 850nm OM4 Bandwidth (MHz x km) 3500 @ 850nm / 500 @ 1300nm / 4700 @ 850nm 21.60 Short Boot 63.60 50.20 Standard Boot FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 45 Technical Information For Data Centres 25mm Part Number Generator -P Connector End A Connector End B Cable type Cable Configuratio Cable Colour Cable Diameter Cable Length LC Short Boot LCS LC Short Boot LCS OM3 RBS RM3 Duplex LSZH D Aqua AQ 1.6mm 1.6MM 1m 1 LC LC OM4 RBS RM4 Simplex LSZH S Erika Violet EV 1.8mm 1.8MM 2m 2 FC FC Duplex LSZH-3 DL 2.0mm 2.0MM 3m 3 SC SC Simplex LSZH-3 SL 5m 5 ST ST Flat Duplex FD 10m 10 Specify XX Example Part Number: LCS LC RM3 D AQ 2.0MM 5 LCSLCRM3DAQ2.0MM5 will configure a 5 metre LC LSZH duplex patch cord made with 2mm zip cable OM3 RBS with short boot at one end *Other lengths available Data Centres Patch cord cables are available with alternative jacket materials including PVC, UL listed riser or plenum and polyurethane. VISIT US ONLINE NOW WWW.FIBREFAB.COM

46 Premise Data Environments Central Office Telcom Data Centres Specialist Applications msfp Mini LC Patch Cords For Data Centres Description For use with 64-port 8Gb SAN Director Fibre Channel Blades Mini-LC patch cords are designed to provide flexible interconnection between specialist high density equipment and patch panels, particularly for use in Storage Area Networks (SAN). Mini-LC connectors are designed to fit msfp LC transceivers and have a pitch of 5.25mm instead of 6.25mm, allowing up to 64 channels in a 1U blade. Features / Benefit Conform to IEC, EIA-TIA, and Telcordia performance requirements Available in different fibre type Available with LC connectors Available in standard and custom lengths RoHS, REACH and SvHC compliant Standard LC 6.25mm Applications Storage Area Networks Brocade: FC8-64 blades used in DCX and DCX 8150 family SAN Backbones IBM: FC#3864 blades used in SAN768B and SAN384B Backbones HP: 64-port 8Gb Fibre Channel Blades used in SN8000B SAN Director Data centers Mini LC 5.25mm Connector Specificatio Compatible with: Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.15 db IEC 61300-3-4 Ave/Master 0.08 db IEC 61300-3-4 Ave/Random 0.10 db IEC 61300-3-34 Return Loss UPC/APC >28 db IEC 61300-3-6 Data Centres Mechanical Properties Value Conformance Mechanical endurance 500 matings IEC 61300-2-2 Vibration 10-55 Hz, 0.75 amplitude IEC 61300-2-1 Drop 5 drops at 1m IEC 61300-2-12 Cable retention 50N IEC 61300-2-4 Cable torsion 1.5kg-2.5kg for 2mm-3mm cable diameter IEC 61300-2-5 Connector Type Conformance Multimode Duplex LC Connector IEC 61754-20 MM PC Beige, White boots All trademarks are the property of their respective owners FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 47 Mini LC Duplex Connectors 66 50 22 Technical information For Data Centres Technical Drawing 5.25 HIGHER FIRE PERFORMANCE JACKET AVAILABLE Cable Specificatio Characteristics Cable Material Strength Member PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LSZH* UNLESS OTHERWISE SPECIFIED: Aramid Dimensions are in mm Dimensions are nominal FIBREFAB Ltd. ANY REPRODUCTION IN Crush (N) PART OR AS A WHOLE WITHOUT THE 1000 WRITTEN PERMISSION OF FIBREFAB Ltd. SCALE: 2:1 IS PROHIBITED. Operating Temperature Drawing ( C) -20 to 60 Davy Avenue, Knowlhill, Number: FL-A-1052-0007-01-R Revision: 1 Milton Keynes, MK5 8ND, UK SHEET 1 OF 1 FirePerformace IEC 60332-1 DO NOT SCALE DRAWING Secondary Buffer Diameter (2.0mm) 900±50 Secondary Buffer Diameter (1.6mm and 1.8mm) 600±50 Minimum Bend Radius (mm) 10D (installed) - 20D (loaded) *Also available in PVC Part Number Generator -DC Connector End A Connector End B Cable type Cable Configuratio Cable Colour Cable Diameter Cable Length msfp LC (mini) LCM LC LC OM3 OM3 Duplex LSZH D Aqua AQ 1.6mm 1.6MM 1m 1 LC Short Boot LCS OM3 RBS RM3 Duplex LSZH-3 DL Erika Violet EV 1.8mm 1.8MM 2m 2 OM4 OM4 2.0mm Leave Blank 3m 3 OM4 RBS RM4 5m 5 Example Part Number: LCM LC OM3 D AQ 5 -DC LCMLCOM3DAQ5 will configure a 5 metre msfp LC to LC duplex patch cord made with aqua OM3 2mm zip cable 10m 10 XX*m XX *Other lengths available Data Centres VISIT US ONLINE NOW WWW.FIBREFAB.COM

48 Premise Data Environments Central Office Telcom Data Centres Specialist Applications Uniboot Patch Cords For Data Centres Description Standards Compliance TIA/EIA 568C TIA/EIA 492AAAP IEC11801 As the networking environment of today becomes increasingly dependent on high speed and high density solutions, effective cable management is a real issue. The key concern is how to manage more cable in a smaller amount of space. Our uniboot fibre patch cord reduces cable management space by 50% compared to standard patch cords. The body of the connector also prevents users from altering the polarity of the patch cord. The patch cord utilises a special round duplex cable that allows duplex transmission within a single 3mm cable. As a result of these unique features our uniboot patch cord offers improved airfl w and visibility of equipment within a high density network environment. Our uniboot patch cord is available in a wide variety of cable styles including LSZH, Plenum and Riser. Features & Benefit Full duplex in a single 3mm or 2.4mm diameter cable Available in OM3, OM4, OS1/OS2 (ITU-T G.652D or G.657A1) or ITU-T G.657A2 cabled fibre types Available with Standard (-UNI) or Low Loss Premium (-UNIDC) optical performance Available with LSZH, Plenum and Riser rated cable in 2.4mm or 3mm diameter Cost effective Save up to 68% of space in cabinets and cable ways Protects network polarity Standard Boots Data Centres Uniboot FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 49 Connector Specificatio Optical Performance - Standard Singlemode Multimode Conformance Insertion loss (Max/Master) 0.25 db 0.25 db IEC 61300-3-4 Ave/Master 0.18 db 0.15 db IEC 61300-3-4 Ave/Random 0.18 db 0.20 db IEC 61300-3-34 Optical Performance - Low Loss Singlemode Multimode Premium Conformance Insertion loss (Max/Master) 0.15 db 0.15 db IEC 61300-3-4 Ave/Master 0.12 db 0.08 db IEC 61300-3-4 Ave/Random 0.12 db 0.10 db IEC 61300-3-34 Cable Specificatio Characteristics UNITS 3MM Round Duplex 2.4MM Round Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush N 1000 1000 Operating Temperature C -20 to 60-20 to 60 Secondary Buffer Diameter µm 900+/-50 600+/-50 Minimum Bending Radius mm 10D (installed) 20D (loaded) 10D (installed) 20D (loaded) Part Number Generator Connector End 1 Connector End 2 Cable Type Cable Configuratio Cable Colour Length (m) -UNI LC LC LC LC OS1/2 09 Yellow YE 1 -UNIDC Duplex D LSZH SC SC OM1 62 Orange OR 2 OM2 50 Aqua AQ 3 OM3 OM3 Purple PU 5 OM4 OM4 Erika Violet * EV * XX G.657.A1 G.657.A2 Example Part Number: 7A1 7A2 * OM4 Only LC LC OM4 D EV 1 -UNI LCLCOM4DEV1-UNI will configure a 1 metre LC to LC OM4 duplex uniboot patch cord in Erika Violet Data Centres VISIT US ONLINE NOW WWW.FIBREFAB.COM

50 Premise Data Environments Central Office Telcom Data Centres Specialist Applications QuickFlip Reversible Polarity LC Uniboot Patchcords Description Our Data Centre LC duplex uniboot patch cord with QuickFlip polarity reversing feature has a unique* and branded design for polarity reversal without the use of tools and without twisting or movement of the optical fibre. The QuickFlip uniboot patch cord is supplied with a 2.4mm round duplex cable providing greater flexibility and 28% space saving compared to a 2mm zip duplex cable.our patch cords are terminated with premium grade zirconia ceramic ferrule connectors which help assure high transmission quality and low optical power loss. *Patent applied for. Features New Polarity Reversable LC uniboot connector type in Blue (SM) and Aqua (MM) Enhanced optical performance to meet tight data centre power budgets New branded Dust cap design provides push fit retention to protect the ferrule end face Standard and Reduced Bend Sensitivity OM3, OM4 and OS2/G652D/ G657A1 or A2 Fibre types Available in Yellow (SM), Aqua (OM3 and OM4) and Erika Violet (OM4) Full duplex in a single 2.4mm diameter cable for space saving and Flexibility IEC, EIA/TIA or Telecordia compliant RoHS materials, REACH and SvHC compliant Applications Data Centres High Density Cabling applications High Bandwidth Ethernet and Fibre Channel Storage Area Networks (SANs) Any critical network Data Centres Connector Specificatio Optical Performance Singlemode Multimode Conformance Il Max/ Master (Acceptance) 0.15 db 0.15 db IEC 61300-3-4 Ave/Master 0.12 db 0.08 db IEC 61300-3-3 Ave/Random 0.12 db 0.10 db IEC 61300-3-34 Return Loss* >55 db >28 db IEC 61300-3-6 Multimode Return Loss based on sample data Cable Specificatio Characteristics UNITS 24.mm Round Duplex Cable Material LSZH Strength Member Aramid Crush N/100mm Operating Temperature C -20 to 60 Secondary Buffer Diameter µm 600+50 Minimum Bending Radius mm 10D (installed) 20D (loaded) See our Data Centre catalogue for a complete range of infrastructure products NEW FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 51 User Guide Step by Step Step 1 - Connector Polarity Uncrossed lines under the connector latch on the housing at both ends indicates uncrossed fibre polarity A-B/B-A Step 2 - Unlock Front Housing on one End Push the keys on either side to unlock the housing to remove the front section of the Uniboot housing. Step 3 - Remove Front Housing Slide the front housing away from the rest of the Uniboot. Step 4 - Rotate Front Housing Flip the released section of the housing. Do not rotate or twist the fibre Step 5 - Attach Front Housing Push the housing back over the ends and the rest of the Uniboot connector until it clicks back into place. Step 6 - Connector Polarity Finished result should now show crossed lines under the Flipped connector latch and uncrossed lines on the unaltered end. This would indicate a crossed fibre polarity A-A/B-B Remove Rotate Re-assemble Part Number Generator -UNIDC Connector End A Connector End A Mode Cable Configuratio Cable Colour Length (m) LCR Polarity Reversing LC LCR Polarity Reversing LC OS1/0S2 09 Yellow YE 1 Duplex D OM3 OM3 Aqua AQ 2 OM4 OM4 Erika Violet EV 3 5 Example Part Number: LCR LCR OM3 D AQ 3 -UNIDC LCRLCROM3DAQ3-UNIDC will configure a 1 metre LCR to LCR OM3 duplex uniboot patch cord in Aqua 10 xx Data Centres VISIT US ONLINE NOW WWW.FIBREFAB.COM

Specialist Applications High Performance Patch Cords 54 Armoured Patch Cords 56 Mode Conditioning Patch Cords 58 Reference Test Leads 60 OM3 & OM4 Multimode Pigtail sets 61 OS1 / OS2 OM1, OM2, OM3, OM4 Pigtails Patch Cords

54 Premise Data Environments Central Office Telcom Data Centres Specialist Applications High Performance Patch Cords For Specialist Applications Description High performance patch cords are a range of best in class singlemode patch cords employing highest grade components, manufacturing processes and test methods that offer excellent performance for demanding telecommunications and data centre applications. High performance patch cords are used where low loss budgets are essential and may be considered for splice replacement. Features / Benefit Conform to IEC, EIA-TIA, ortelecordia performance requirements Special high accuracy G.652D photonics fibre availabl RoHS, REACH & SvHC materially compliant Applications Data Centre Telecommunication networks CATV LAN and WAN FTTx Broadband network Termination Specificatio Specialist Applications Optical Performance Singlemode Conformance IL MAX/ Master (Acceptance) 0.10 db IEC 61300-3-4 MAX IL/Random 0.20 db IEC 61300-3-34 Ave/Master* 0.08 db IEC 61300-3-4 Ave/Random* 0.08 db IEC 61300-3-34 Return Loss 55/65 db IEC 61300-3-6 Mechanical Properties Criteria* Conformance Mechanical endurance 500 matings IEC 61300-2-2 Vibration 10-55 Hz, 0.75 amplitude IEC 61300-2-1 Drop Drop height 1m, 5 drops IEC 61300-2-12 Cable retention Magnitude 50 N IEC 61300-2-4 Cable torsion 1.5kg-2.5 kg for 2mm- 3mm cable diameter * The change in attenuation for all the above listed criteria shall be a maximum of 0.10dB ** Subject to cable design IEC 61300-2-5 See our Data Centre catalogue for a complete range of infrastructure products FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 55 Technical information For Specialist Applications Cable Specificatio Characteristics Units Simplex Cable Material LSZH Strength Member Aramid Crush N 1000 Operating Temperature C -20 to 60 Secondary Buffer Diameter (2.0mm, 2.4mm and 3.0mm) µm 900±50 Secondary Buffer Diameter (1.6mm and 1.8mm) µm 600±50 Colour SM Yellow MM Orange(OM1,OM2) MM Aqua (OM3, OM4) Fibre Specificatio Characteristics Units Singlemode Cladding Diameter µm 125±0.3 Core/Cladding Concentricity Error µm 0.3 Cladding Non Circularity % 0.7 Polarization Mode Dispersion (PMD) Ps/(km)½ 0.06 Mode Field Diameter (mfd) @ 1310nm µm 9.2±0.4 Mode Field Diameter (mfd) @ 1550nm µm 10.4±0.5 Part Number Generator -HP Connector End A Connector End B Example Part Number: Cable type Cable Configuratio Cable Colour FC FC SMP D YE 5 -HP FCFC09DYE5HP will configure a 5m FC duplex OS1 high performance patch cord Cable Diameter FC FC FC FC OS1/22 SMP Yellow YE 1 Mtr 1 Duplex D LSZH FC/APC FCA FC/APC FCA 2 Mtr 2 SC SC SC SC 3 Mtr 3 Simplex S LSZH SC/APC SCA SC/APC SCA 5 Mtr 5 ST ST ST ST 10 Mtr 10 Flat FD Duplex LC LC LC LC XX* Mtr XX LC /APC LCA LC /APC LCA *Other lengths available Specialist Applications VISIT US ONLINE NOW WWW.FIBREFAB.COM

56 Premise Data Environments Central Office Telcom Data Centres Specialist Applications Armoured Patch Cords For Specialist Applications Description Standards Compliance TIA/EIA 568C TIA/EIA 492AAAP IEC19801 Armoured patch cords are used in customer premises, central offices and in harsh environments. The patch cords provide flexible interconnection to active equipment, passive optical devices and cross-connects. Armoured patch cords are constructed with an helical stainless steel tape over a buffered fibre surrounded by a layer of aramid and stainless steel mesh with an outer jacket Our patch cords are terminated with our standard range of connectors, all quality tested to meet our and international standards. Features SC, LC, ST and FC connectors Available in low smoke zero halogen (LSZH) jacket Conforms to IEC, EIA-TIA ortelcordia performance requirements Available in different fibre type Available in standard and custom lengths REACH, SvHC and RoHS materials compliant Applications CATV / VIDEO Passive Optical Network PON FTTX ATM, SONET and WDM Military applications LC-UPC 9/125 Uniboot Patch Cord Armoured Connector Specificatio Specialist Applications Optical Performance Singlemode Multimode Conformance IL Max/Master (Acceptance) 0.25dB 0.25dB IEC 61300-3-4 Ave/Master* 0.18dB 0.2dB IEC 61300-3-4 Ave/Random* 0.18dB - IEC 61300-3-34 Return Loss Singlemode UPC/APC 55/65 db - IEC 61300-3-6 Fibre Specificatio Characteristics Attenuation (db/km) Singlemode 0.38@1310nm / 0.25 @1550nm Chromatic Dispersion (ps/nm x km) Singlemode 3.0 @ 1310nm / 18.0 @1550nm Attenuation (db/km) Multimode 2.8@850nm / 0.8 @1300nm Cable Specificatio Characteristics Simplex Duplex Cable Material LSZH LSZH Strength Member Aramid Aramid Crush (N) short term 3000 3000 Crush (N) long term 200 200 Operating Temperature ( C) -20 to 60-20 to 60 Fire Specificatio IEC 60332-1 IEC 60332-1 SC-PC 50/125 Simplex Patch Cord Armoured FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 57 Simplex Patch Cord Armoured Duplex Patch Cord Armoured Outer Jacket Outer Jacket Aramid Aramid Tight Buffer Fibre Tight Buffer Fibre Hellical Metal Tape Hellical Metal Tape Metal Braid Mesh Metal Braid Mesh Outer Jacket Metal Braid Mesh Aramid Hellical Metal Tape Cable Tight Buffer Fibre Part Number Generator /ARM Connector End A Connector End B Cable type Cable Configuratio Cable Colour Cable length (m) FC FC FC FC OS1/ OS2 FCAPC FCA FCAPC FCA OM1 62 Example Part Number: 09 Duplex 3.3mm Simplex 3mm D Blue BL XX S Grey GR SC SC SC SC OM2 50 Aqua AQ SCAPC SCA SCAPC SCA OM3 OM3 ST ST ST ST OM4 OM4 LC LC LC LC FC FC 09 D BL 10 /ARM FCFC09DBL10/ARM will configure a 10 metre, FC to FC, OS1 duplex, armoured patch cord with a blue jacket Specialist Applications VISIT US ONLINE NOW WWW.FIBREFAB.COM

58 Premise Data Environments Central Office Telcom Data Centres Specialist Applications Mode Conditioning Patch Cords For Specialist Applications Description Our Mode Conditioning Patchcords provide an effective launch platform for 1310 nm Laser switches being used in multimode cabling systems. Mode conditioned patchcords can allow a much higher operational bandwidth by precisely aligning a single mode termination at the laser transmitter and providing an off-centre launch into the multimode fibre core. This is essential for networks using legacy 62.5/125 and 50/125 multimode optical fibre and may be specified for current multimode networks depending upon the system requirements. Features & Benefit Increased transmission bandwidth by as much as 4 times Reduced modal noise Low insertion loss (< 1dB) Easy installation Various connector options Technical Specificatio Description 62.5µm MMF 50µm MMF Description Operating wavelength Maximum insertion loss 1300nm 0.5dB Coupled power ratio (CPR) 28 to 40dB 12 to 20dB Back reflection S/M channe Back reflection M/M channe 30dB 20dB Temperature Cycling Damp Heat Vibration (Mated Pair) (IEC 61300-2-22) -40 to +75 C, 40 cycles =0.2dB Change (IEC 61300-2-19) 60 C at 95% RH, 96 hours =0.2dB Change (IEC 61300-2-1) 10-55 Hz, 1.5mm P to P =0.3dB Change Specialist Applications Connector finis Ferrule radius of curvature Fibre height 10 to 25mm -50 to 50nm Maximum angular offset 1 Sheath colour Patch cords Specifications Connectors available Product Packaging Length Types: FC, ST, SC, LC PC Orange (yellow for SM leg) Each patch cord is packaged individually and individually identifie for traceability, test certification is supplied for each assembly. 2000mm ± 10mm Other lengths available to order Mating Durability Operating Temperature (IEC 61300-2-2) 1000 mating cycles Clean every 25 < 0.2 db Change (IEC 61300-2-22) -20 C to + 60 C FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 59 Technical information For Specialist Applications Part Number Generator Connector End A Singlemode Connector End B Mode Example Part Number: Gigabit Cable length (m) FC FC FC FC OM1 62 XX SC SC SC SC OM2 50 ST ST ST ST LC LC LC LC LC ST 62 Gigabit 1 LCST62GIGABIT1 will configure a 1 Metre 62.5/125 Gigabit duplex ethernet patch cord (LC is 9/125 OS1/OS2) Specialist Applications VISIT US ONLINE NOW WWW.FIBREFAB.COM

60 Premise Data Environments Central Office Telcom Data Centres Specialist Applications Reference Test Lead For Specialist Applications Description Our range of reference test leads are ideal for high precision and high performance optical test applications. The test leads are terminated with the highest quality physical contact (singlemode) zirconia ferrule connectors. The connectors are manufactured with precision mounting and polishing techniques which ensure excellent mating characteristics and optimised optical performance. 62.5/125 OM1 Features & Benefit Optimised geometry of fibre, cable and connector providing reduced installation time and cost through improved accuracy and reliability of measurement Conforms to IEC, EIA-TIA, and Telecordia performance requirements Supplied with ultra tight geometry ITU-T G.652D (LWP) singlemode and multimode optical fibre Available with FC, SC, LC, & ST high performance connector types to suit majority of applications Available in standard lengths RoHS materials compliant REACH & SvHC compliant Optional foam lined storage case for added protection Tethered dust caps for protection of the connector end face End face geometry, concentricity and IL / RL test report provided Applications Optical network testing Testing Labs Critical telcom and data centre applications Instrumentation Termination houses 50/125 OM2 / OM3 / OM4 OS1 / OS2 Specialist Applications Description Optical Performance Singlemode Multimode Conformance IL MAX/ Master (Acceptance) 0.10 db 0.10 db IEC 61300-3-4 MAX IL/Random (97%) 0.20 db 0.25 db IEC 61300-3-34 Ave/Master* 0.08 db 0.08 db IEC 61300-3-4 Ave/Random* 0.08 db 0.10 db IEC 61300-3-34 Return Loss 55/65 db - IEC 61300-3-6 Concentricity / Eccentricity Max fibre to ferrule OD finished produ 0.8µm Max / 0.4 µm Max 1.5 µm Max / 0.75 µm Max Apex Offset 50 µm Max 50 µm Max Radius of curvature (ST, SC, FC) Radius of curvature (LC) 10mm Min / 20mm Max 7mm Min / 20mm Max Mechanical endurance 500 matings IEC 61300-2-2 * The change in attenuation for all the above listed criteria shall be a maximum of 0.10dB **APC available on request FOR MORE INFORMATION CALL +44 (0) 1908 441144

Premise Data Environments Central Office Telcom Data Centres Specialist Applications 61 Cable Specificatio Characteristics Units Simplex Cable Material LSZH Strength Member Aramid Crush N 1000 Operating Temperature C -20 to 60 Secondary Buffer Diameter µm 900±50 Colour µm OS1/2 ITU-T G.652D SM Blue OM1 62.5/125 Green OM2, OM3, OM4 50/125 Red Fibre Specificatio Singlemode Characteristics Units Singlemode Cladding Diameter µm 125±0.4 Core/Cladding Concentricity Error µm 0.3 Cladding Non Circularity % 0.3 Mode Field Diameter (mfd) @ 1310nm µm 9.0±0.4 Mode Field Diameter (mfd) @ 1550nm µm 10.1±0.5 Hard Carry Case Multimode Characteristics Units Multimode OM1 Multimode OM2, OM3, OM4 Cladding Diameter µm 125±1 125±1 Core Diameter µm 62.5±1 50±1 Core/Cladding Concentricity Error µm < 1.0 < 1.0 Cladding Non Circularity % < 1.0 < 1.0 Numerical Aperture 0.275±0.015 0.2±0.015 Part Number Generator Master Side Equipment Side FC FC FC FC Cable type OS1/ OS2 SC SC SC SC OM1 1T LC ST LC ST OM2 OM3 OM4 9T Example Part Number: Cable Configuratio Simplex LSZH S 2 L RTL Cable Diameter FC FC 1T S 2 L G 1.5 RTL FCFC1TS2LG1.5TL will configure a 1.5 metre, FC to FC, OM1 simplex, LSZH test lead with a green jacket Jacket Type Colour Length (m) S 2mm 2 LSZH L Green OM1 G 1m m Red OM2/ OM3/OM4 R 1.5m 1.5 4T Blue OS1/2 B 2m 2 Test Lead Specialist Applications VISIT US ONLINE NOW WWW.FIBREFAB.COM

62 Premise Data Environments Central Office Telcom Data Centres Specialist Applications OM3 & OM4 Multimode Pigtail Sets For Specialist Applications Description Pigtail sets with 12 colours are ideal for installation into fibre managment equipment such as patch panels or wall boxes. Multimode OM3 & OM4 pigtails sets are used to connect high speed networks like 10 Gigabit Ethernet and Fibre Channel. The multimode pigtails are terminated with standard connector with gives optimum optial performance. Features & Benefit OM3 - SC and LC aqua plastic multimode connectors OM4 - SC and LC erika violet plastic multimode connectors Low smoke zero halogen (LSZH) buffer 900μm easy strip buffer provided in 12 colours as per IEC 60304 OM3 - Mutlimode optial fibre conforms to ITU-T G.651.1, TIA/EIA 492AAAC and IEC 60793-2-10 A1a.2 OM4 - Mutlimode optial fibre conforms to ITU-T G.651.1, TIA/EIA 492AAAD and IEC 60793-2-10 A1a.3 Different connector performance range available for specific applicatio Available in standard and blister packing Applications Datacom applications including 10 Gigabit Ethernet and Fibre Channel Internal inter-connect in patch panels, wall boxes, ODFs and splice cassettes Easy strip LSZH pigtials for optimised storage in slim design splice cassettes 900 micron buffered fibre provides protection for hanling during installatio OM3 OM4 Part Number Generator Connector Specificatio B Optical Performance Multimode Conformance IL Max/Master (Acceptance) 0.25dB IEC 61300-3-4 Specialist Applications Connector OM3 Example Part Number: Mode Length SCAQ SC OM3 OM3 1 Mtr 1 LCAQ LC OM4 OM4 2 Mtr 2 FC FC 3 Mtr 3 ST ST 5 Mtr 5 Connector OM4 10 Mtr 10 SCEV SC Specify xx LCEV FC ST LC FC ST LCEV OM4 B 2 E-12/1B LCEVOM4B2E-12/1B will configure a 2 metre LC OM4 easy strip buffer in 12 colours and Erika violet connector Cable Construction and Packaging Style Tight Buffer Pack of 12 Tight Buffer- Blister packof 12 Easy Strip pack of 12 Easy Strip Blister pack of 12-12/1B BP12- TB E-12/1B Bp12 Ave/Master* 0.15dB IEC 61300-3-4 Ave/Random* 0.20dB IEC 61300-3-34 Cable Specificatio Characteristics Units Simplex Crush N/100mm 500 Operating Temperature ( C) C -20 to 60 Nominal Buffer Diameter µm 900 + 50 Max Tensile Load N 5 Fibre Specificatio Characteristics Attenuation (db/km) OM3 Bandwidth OFL/ EMB (MHz x km) OM4 Bandwidth OFL/ EMB (MHz x km) 2.8@850nm / 0.8 @1300nm 1500 @ 850nm / 500 @1300nm/ 2000 @ 850 nm 3500@850nm / 500@1300nm 4700 @850nm FOR MORE INFORMATION CALL +44 (0) 1908 441144

We also stock a wide array of cabling solutions, tooling equipment, connectors and adaptors. For more information and to download the latest catalogues visit our website at www.fibrefab.com Tools and Test Equipment Connectors and Adaptors Fibre Optic Cable Find out more... click www.fibrefab.co Videos Forms and Guides

Search for FibreFab or visit www.fibrefab.com/linkedi Search for FibreFab or visit www.fibrefab.com/youtub Search for FibreFab or visit www.fibrefab.com/twitte Search for FibreFab or visit www.fibrefab.com/googl Find the FibreFab app by visiting the App Store or Google Play store and searching for FibreFab. App features: Latest News, Up To Date Catalogues, Live Chat and Video Tutorials FibreFab Group and UK Headquarters UK Manufacturing Plant FibreFab Ltd Davy Avenue, Knowlhill, Milton Keynes, MK5 8ND, United Kingdom. Tel: +44 (0) 1908 441144 Fax: +44 (0) 1908 441133 E-mail: sales@fibrefab.co www.fibrefab.co FibreFab Ltd Boundary Road, Haverhill Suffolk, CB9 7YH, United Kingdom. Tel: +44 (0) 1908 441144 Fax: +44 (0) 1908 441133 E-mail: sales@fibrefab.co www.fibrefab.co Dubai United States of America China FibreFab General Trading LLC Main Office 1601, Room 1602 48 Burj Gate, Sheik Zayed Road PO Box 378978 Dubai United Arab Emirates Tel: +971 4 404 9606 Fax: +971 4 404 9607 Email: mea@fibrefab.com www.fibrefab.com FiberFab Inc. 260 Parkway East, Duncan. SC 29334 USA Tel: +1 800-790-9932 E mail: sales@fiberfabinc.com www.fiberfabinc.com FibreFab Asia Pacific 7D, Block A, Hongsong Building Tairan 6th Road, Futian, Shenzhen China. Tel: +86 755 2561 3694 Fax: +86 755 2561 3697 E-mail: asia@fibrefab.cn www.fibrefab.cn Revision 12.4 FibreFab 2015 All Rights Reserved E&OE FFABFIBMANCAT Products covered by GB and other patents and/or patents applied for: Pre-Terminated Cable Breakout Module, UHD Modular System and Shuttered Quad Adaptor FibreFab, and FirstLight are trademarks of FibreFab Ltd