Product pplication workware view and workware connect Product pplication workware view and workware connect workware Specification uide 1
workware TM Product pplication uide Table of ontents Product pplications workware connect / workware view Technology pplications Overview.... 2-3 able Sharing pplication... 4-11 able Sharing with Touch ontrol pplication... 12-19 Wireless Sharing pplication... 20-27 Wireless Sharing with able ackup pplication.... 28-35 Product pplication Table of ontents 2 workware Specification uide
able Sharing Product pplication Overview of workware Technology pplications Product pplication Overview of workware Technology pplications SWITIN To meet the needs of different users workware connect may be specified using any of these 4 levels of connectivity. ach solution is flexible and scalable offering a choice cabled sharing or wireless sharing or a combination of both. ach application requires a different combination of workware components that must be specified. Method for Sharing Presentations: (ow users share their presentation on the Monitor) able Sharing Presenters use a single audio/video cable connected directly to each monitor, this provides audio/video access to the monitor to share presentations. Method for Switching etween Presenters: (ow users switch the monitor presentation to other users) Physical able Switching Users switch between presenters by disconnecting the audio/video cable from the first user s device and connecting it to the second user s device. Method for ontrolling Monitor Power: Remote ontrol Monitor power is controlled using the monitor remote control (field supplied) or the power button on the monitor. Maximum Number of onnections to the Monitor : (1) abled onnection To ach Monitor Since the audio/video cable is directly wired to the monitor this application can only provide one connection to each monitor for presentations. Supported Presentation evices: abled onnections - Most user devices with MI or V+udio cable connections can connect to the monitor for presentations (some devices may require field supplied adapter cables if they lack MI or V+udio connections). book omputers (Windows/Mac) Tablets (May require field supplied MI or V adapter cables) Mobile evices/smart Phones (May require field supplied MI or V adapter cables) V/lu-Ray Players dvantages: Simple configuration and operation. Plug and play access for devices - no software needed. oes not require building network access or configuration. etter for smaller groups of presenters. onsiderations: Presenters must be within reach of cables. Not recommended for Video onferencing applications. oes not support the Quad View feature. Limited number of connections to monitor. Switching between users is slower and more cumbersome. Relies on Remote ontrol to turn monitor on and off. NON SWITIN cable sharing (No Touch ontrol) abled evice NO INTR Module Non-Switching Interface Module Video able Specify with Non-Switching Interface Module abled evice Monitor Remote ontrol cable sharing with touch control abled evice Touch ontrol Method for Sharing Presentations: (ow users share their presentation on the Monitor) abled Sharing With Touch ontrol Presenters may access the monitor to share a presentation by connecting one of the audio/ video cables to their device and activating the cables corresponding button on the Touch ontrol interface. Method for Switching etween Presenters: (ow users switch the monitor presentation to other users) Touch ontrol Switching Users may switch the monitor presentation to other users by activating the corresponding button on the Touch ontrol interface. Method for ontrolling Monitor Power: Touch ontrol Monitor power is controlled using the power button on the Touch ontrol. Maximum Number of onnections to the Monitor : Up to (4) abled onnections To The Monitor(s) The Interface Module can accommodate a maximum of four audio/video cables. Supported Presentation evices: abled onnections - Most user devices with MI or V+udio cable connections can connect to the monitor for presentations (some devices may require field supplied adapter cables if they lack MI or V+udio connections). book omputers (Windows/Mac) Tablets (May require field supplied adapter cables) Mobile evices (May require field supplied adapter cables) V/lu-Ray Players dvantages: Plug and play access for devices - no software needed. oes not require building network access or configuration. The Touch Pad allows the monitor presentations to be switched between multiple users. The Touch Pad allows users to control monitor power. eatures a Video onferencing Mode (when field supplied Video onferencing quipment is connected). onsiderations: Presenters must be within reach of cables. oes not support the Quad View feature. Limited number of connections to monitor. able Sharing SWITIN Specify with Switching NON NO SWITIN Interface Module INTR Switching Interface Module Video ables abled evice 2 workware Specification uide
Product pplication Overview of workware Technology pplications SWITIN wireless sharing Wireless Module Non-Switching Interface Module (Optional) You 1. onnect may also to use the the wireless Wireless network Presentation listed Server below, Key IP: to or 192.168.100.10 connect through without your local installing wireless SSI: workware-connect software network 2. Open your browser and go to the IP address shown below 3. lick on ownload, and execute the installation program 4. Run the program and enter the LOIN O shown on the screen to start projection Monitor Remote ontrol 1. onnect to the wireless network listed Server below, IP: or 192.168.100.10 through your local wireless SSI: workware-connect network 2. Open your browser and go to the IP address shown below 3. lick on ownload, and execute the installation program Server IP: 192.168.100.10 SSI: workware-connect Quick uide 4. Run the program and enter the LOIN O shown on the screen to start projection Method for Sharing Presentations: (ow users share their presentation on the Monitor) Wireless able Sharing Sharing Presenters use workware s Wireless Presentation Software to access the building s wireless wi-fi network which provides them with audio/video access to the monitor to share presentations. Method for Switching etween Presenters: (ow users switch the monitor presentation to other users) Wireless Switching Users may switch between wireless presenters using controls on workware s Wireless Presentation Software (WPS). Method for ontrolling Monitor Power: Remote ontrol Monitor power is controlled using the monitor remote control (field supplied) or the power button on the monitor. Maximum Number of onnections to the Monitor : Unlimited Wireless onnections To Monitor The maximum number of users that can log onto a wireless session is only limited by the capacity of the building s wireless network. Supported Presentation evices: Wireless onnections - This application only supports wireless user devices capable of running workware s Wireless Presentation Software (WPS). Wireless Presentation Software Supported Operating Systems: Windows 2000 (video only) Windows 7 (audio and video) Windows XP (audio and video) Windows 8 (audio and video) Windows Vista (video only) Mac OS X 10.5 and later (video only) dvantages: Works well with large or small groups of presenters. Presenters can be located anywhere in the room since they aren t tied to audio/video cables. Wireless Presentation Software makes switching between presenters quick and easy. Wireless Presentation Software supports Quad View. onsiderations: Not recommended for Video onferencing applications. Relies on Remote ontrol to turn monitor on and off. The standard wireless configuration requires cabled access to building network (if the Wireless Module is configured in stand alone mode a network connection is not required). ll user devices must have the Wireless Presentation Software (WPS) installed to be able to share a wireless presentation. NON SWITIN Wireless evice Specify with Non-Switching NO INTR Interface Module Module Server IP: 192.168.100.10 SSI: workware-connect Server IP: 192.168.100.10 SSI: workware-connect Wireless evice You may also use the Wireless Presentation Key to connect without installing software Server IP: 192.168.100.10 SSI: workware-connect Quick uide 1. onnect to the wireless network listed below, or through your local wireless network 2. Open your browser and go to the IP address shown below 3. lick on ownload, and execute the installation program 4. Run the program and enter the LOIN O shown on the screen to start projection You may also use the Wireless Presentation Key to connect without installing software LOIN O: 1234 You 1. onnect may also to use the the wireless Wireless network Presentation listed below, Key to or connect through without your local installing wireless software network Quick uide 2. Open your browser and go to the IP address shown below 3. lick on ownload, and execute the installation program 1. onnect to the wireless network listed below, or through your local wireless network 2. Open your browser and go to the IP address shown below 4. Run the program and enter the LOIN O shown on the screen to start projection 3. lick on ownload, and execute the installation program 4. Run the program and enter the LOIN O shown on the screen to start projection You may also use the Wireless Presentation Key to connect without installing software Quick uide You may also use the Wireless Presentation Key to connect without installing software LOIN O: 3. lick 1234 on ownload, and execute the Quick LOIN installation uide O: program 1234 4. Run the program and enter the LOIN O shown on the screen to start projection wireless sharing with cable backup 1. onnect to the wireless network listed below, or through your local wireless network 2. Open your browser and go to the IP address shown below abled evice Quick LOIN uide O: 1234 Wireless evice Wireless Module Method for Sharing Presentations: (ow users share their presentation on the Monitor) abled Sharing With Touch ontrol Presenters may access the monitor to share a presentation by connecting one of the audio/ video cables to their device and activating the cables corresponding button on the Touch ontrol. Wireless Sharing With Touch ontrol Using the Touch ontrol interface, users may switch the system to the wireless mode and use workware s Wireless Presentation Software to access the building s wireless wi-fi network which provides them audio/video access to the monitor to share presentations. Method for Switching etween Presenters: (ow users switch the monitor presentation to other users) able Touch ontrol Sharing Switching Users may switch the monitor presentation to other cabled users by activating the corresponding button on the Touch ontrol. Wireless Switching When the Wireless Mode is active, users may switch between wireless presenters using controls on workware s wireless presentation software. Method for ontrolling Monitor Power: Touch ontrol Monitor power is controlled using the power button on the Touch ontrol. Maximum Number of onnections to the Monitor : (4) abled onnections To Monitor(s) The Interface Module can accommodate a maximum of four audio/video cables. Unlimited Wireless onnections To Monitor The maximum number of users that can log onto a wireless session is only limited by the capacity of the building s wireless network. Supported Presentation evices: abled onnections - Most user devices with MI or V+udio cable connections can connect to the monitor for presentations (some devices may require field supplied adapter cables if they lack MI or V+udio connections). book omputers (Windows/Mac) Tablets (May require field supplied adapter cables) Mobile evices (May require field supplied adapter cables) V/lu-Ray Players Wireless onnections - Only supports wireless user devices capable of running workware s Wireless Presentation Software. Wireless Presentation Software Supported Operating Systems: Windows 2000 (video only) Windows 7 (audio and video) Windows XP (audio and video) Windows 8 (audio and video) Windows Vista (video only) Mac OS X 10.5 and later (video only) dvantages: Plug and play access for cabled devices - no software needed. Touch Pad allows monitor presentations to be switched between cabled presentation mode and wireless presentation mode. Touch Pad allows users to control monitor power. Touch Pad allows the monitor presentation to be switched over to the Video onferencing Mode (when field supplied Video onferencing quipment is included). Wireless Presentation Software supports Quad View. onsiderations: abled Presenters must be within reach of cables. Requires access to building network (if Wireless Module is configured in stand alone mode a network connection is not required). ll user devices must be installed with Wireless Presentation Software before they can present wirelessly. able Sharing SWITIN Specify with Switching NON NO SWITIN Interface Module Switching Interface Module Video ables INTR abled evice Wireless evice Product pplication Overview of workware Technology pplications workware Specification uide 3
Product pplication able Sharing Product pplication able Sharing Single Monitor pplication Separately Specified omponents SWITIN able Sharing (No Touch ontrol) Single Monitor pplication Sharing Method: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: dvantages: Separately Specified omponents: Non-Switching TWRN _ ield Supplied omponents: NON SWITIN NO INTR Module (1) V+udio able able Sharing Presenters use a single audio/video cable connected directly to the monitor, this provides audio/video access to the monitor to share presentations. Physical able Switching Users switch between presenters by disconnecting the audio/video cable from the first user s device and connecting it to the second user s device. Single Monitor One abled onnection to the Monitor Since the audio/video cable is directly wired to the monitor this application can only provide one connection to each monitor for presentations. Monitor Remote ontrol Monitor power is controlled using the monitor remote control (field supplied) or the power button on the monitor. Simple configuration. Plug and play access for cabled presenters (no software needed). + (1) workware view + (1) Planes onference+ Table Mount Single Monitor TWRVTM_ WVT-SS-P (1) workware view Structural Wall Mount Single Monitor TWRVWM_ WV-SSS-PP (1) MI able Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (1) able ase TWRV (1) Monitor with Remote ontrol Step 4 - able Management: (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ UW OPTIONL: (1) able Retractor TWRVR WX-0301- L LNT: L LNTS: Specify cable lengths to reach from user s device to the back of the monitor. 4 workware Specification uide
Product pplication able Sharing able Sharing (No Touch ontrol) Single Monitor pplication abling iagram 1 Separately Specified omponents: Non-Switching TWRN _ 1 Interface Module Power ord (orded 3 m long) 1 2 ield Supplied omponents: (1) V+udio able (1) MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors.! UTION ctive MI or irectional MI cables will cause damage to workware components and should not be used. + (1) workware view + (1) Planes onference+ Table Mount Single Monitor TWRVTM_ (1) workware view Structural Wall Mount Single Monitor TWRVWM_ Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (1) Monitors Monitor Includes: 1 Monitor Power ord (Lengths vary by manufacturer) 2 Monitor Remote ontrol (Lengths vary by manufacturer) Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ OPTIONL: (1) able Retractor TWRVR Product pplication able Sharing (No Touch ontrol) Single Monitor pplication abling iagram workware Specification uide 5
Product pplication able Sharing Product pplication able Sharing (No Touch ontrol) Table Mount Single Monitor pplication able Sharing (No Touch ontrol) Table Mount Single Monitor pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: Non-Switching TWRN _ + (1) workware view + (1) Planes onference + Table Mount TWRVTM_ Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL Step 4 - able Management: ield Supplied omponents: (1) V+udio able (1) Monitors (1) able ase TWRV (1) MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. (1) Wire Manager orizontal TWRVW _ OPTIONL: (1) able Retractor TWRVR 6 workware Specification uide
Product pplication able Sharing able Sharing (No Touch ontrol) Wall Mount Single Monitor pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: Non-Switching TWRN _ 1 + (1) workware view + (1) Planes onference + Wall Mount TWRVTM_ 1 Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL ield Supplied omponents: (1) V+udio able (1) MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. (1) Monitors Step 4 - able Management: (1) able ase TWRV OPTIONL: (1) able Retractor TWRVR Product pplication able Sharing (No Touch ontrol) Wall Mount Single Monitor pplication Wall mount applications may not require a table. workware Specification uide 7
Product pplication able Sharing Product pplication able Sharing ual Monitor pplication Separately Specified omponents SWITIN able Sharing (No Touch ontrol) ual Monitor pplication Sharing Method: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: dvantages: Separately Specified omponents: Non-Switching TWRN _ ield Supplied omponents: NON SWITIN NO INTR Module (2) V+udio able able Sharing Presenters use a single audio/video cable connected directly to each monitor, this provides audio/video access to the monitor to share presentations. Physical able Switching Users switch between presenters by disconnecting the audio/video cable from the first user s device and connecting it to the second user s device. ual Monitor Two abled Monitor onnections (one connection for each monitor) Since the audio/video cables are directly wired to each monitor this application can only provide one connection to each monitor for presentations. Monitor Remote ontrol Monitor power is controlled using the monitor remote control (field supplied) or the power button on the monitor. Simple configuration. Plug and play access for cabled presenters (no software needed). + (1) workware view Table+ (1) Planes onference + Mount ual Monitor TWRVTM_ WVT-S-P With Shroud (1) workware view Structural Wall Mount Structural Walls ual Monitors TWRVWM_ WVT-N-P Without Shroud WV-SS-PP (2) MI able Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (1) able ase TWRV (2) Monitors with Remote ontrol Step 4 - able Management: (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ UW OPTIONL: (1) able Retractor TWRVR WX-0301- L LNT: L LNTS: Specify cable lengths to reach from user s device to the back of the monitor. 8 workware Specification uide
Product pplication able Sharing able Sharing (No Touch ontrol) ual Monitor pplication abling iagram 1 Separately Specified omponents: Non-Switching TWRN _ 1 Interface Module Power ord (orded 3 m long) 1 2 2 2 + (1) workware view Table+ (1) Planes + Mount ual Monitor TWRVTM_ (1) workware view Structural Wall Mount ual Monitors TWRVWM_ 1 1 onference Table Interior Leg or 2 (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL 1 ield Supplied omponents: (2) User udio/video ables 1 V+udio able 2 MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. 2 (1) Monitors Monitor Includes: 1 Monitor Power ord (Lengths vary by manufacturer) 2 Monitor Remote ontrol (Lengths vary by manufacturer) Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ OPTIONL: (1) able Retractor TWRVR Product pplication able Sharing (No Touch ontrol) ual Monitor pplication abling iagram! UTION ctive MI or irectional MI cables will cause damage to workware components and should not be used. workware Specification uide 9
Product pplication able Sharing Product pplication able Sharing (No Touch ontrol) Table Mount ual Monitor pplication able Sharing (No Touch ontrol) Table Mount ual Monitor pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: Non-Switching TWRN _ + (1) workware view Table Mount ual Monitor TWRVTM_ 2 1 + (1) Planes onference Table Interior Leg or + Step 4 - able Management: (1) able ase TWRV ield Supplied omponents: (2) User udio/video ables 1 V+udio able 2 MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. (2) Monitors (1) Wire Manager orizontal TWRVW _ (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL OPTIONL: (1) able Retractor TWRVR 10 workware Specification uide
Product pplication able Sharing able Sharing (No Touch ontrol) Wall Mount ual Monitor pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: Non-Switching TWRN _ + 2 1 (1) workware view Structural Wall Mount ual Monitors TWRVWM_ + (1) Planes onference Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL ield Supplied omponents: (2) V+udio able (2) Monitors + (2) MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. Step 4 - able Management: (1) able ase TWRV OPTIONL: (1) able Retractor TWRVR Product pplication able Sharing (No Touch ontrol) Wall Mount ual Monitor pplication Wall mount applications may not require a table. workware Specification uide 11
Product pplication able Sharing with Touch ontrol Product pplication able Sharing with Touch ontrol Single Monitor pp Separately Specified omponents able Sharing with Touch ontrol Single Monitor pplication Sharing Method: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: dvantages: Separately Specified omponents: Switching TWRS _ SWITIN User udio/video able Options: MI NON SWITIN WX-0301- W (switching) N / NO INTR Module WX-0701-PS V+udio ield Supplied omponents: (1) Power dapter ord National Power Receptacle (2) - I 14 splitter power cord onnects the power relay cord to the monitor/tv WX-0101-PPower cable 12 workware Specification uide abled Sharing With Touch ontrol Presenters may access the monitor to share a presentation by connecting audio/video cables to their device and activating the cables corresponding button on the Touch ontrol. Touch ontrol Switching Users may switch the monitor presentation to other users by activating the buttons on the Touch ontrol. abled onnections (4 onnections Maximum) The Interface Module can accommodate a maximum of four audio/video cables. Touch ontrol Monitor power is controlled using the power button on the Touch ontrol. Plug and play access for cabled presenters (no software needed). Touch Pad allows easy switching between cabled presenters and presentation modes. Touch Pad/Processor supports Video onferencing Mode. + (1) workware view + (1) Planes onference + Table Mount TWRVTM_ WVT-SS-P (1) workware view Structural Wall Mount TWRVWM_ WV-SSS-PP able accessories for Interface module switching (2) Power dapter ord National plug - I 13 Power cord onnects power relay cord to a power receptacle onnects workware processor to a power receptacle WX-0101-P Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (1) MI able L LNTS: WX-0301- Specify cable lengths to reach from user s device to the video connection on the back of the monitors. Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ UW OPTIONL: (1) able Retractor TWRVR (1) Monitor
Product pplication able Sharing with Touch ontrol able Sharing with Touch ontrol Single Monitor pplication abling iagram User 1 User 2 User 3 User 4 1 9 Separately Specified omponents: 10 Switching TWRS _ Switching Interface Module Includes: 1 (1) Interface Module Power ord (orded 3 m long) 2 (1) Processor 4 (1) Touch ontrol ata able (1.8 m long) 5 (1) Power Relay ord (1.5 m long) 6 (1) Power Relay ata able (1.8 m long) * User /V able Options May be specified with two or four of the following audio/video cables: 9 MI able (3 m long) 10 V+udio able (3 m long) 4 6 2 User 4 User 3 User 2 User 1 3 7 8 5 + + + (1) workware view (1) Planes onference (1)able ase Table Mount Table Interior Leg or TWRV TWRVTM_ (1) workware view Structural Wall Mount TWRVWM_ 1 ield Supplied omponents: (1) Monitor Monitor Includes: (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) (1) MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. 1 Monitor Power ord (Lengths vary by manufacturer) Step 4 - able Management: (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ OPTIONL: (1) able Retractor TWRVR! UTION ctive MI or irectional MI cables will cause damage to workware components and should not be used. o not use Power Relay with projectors, to allow proper cool down cycle for projector lamp. Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require replacing the 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near the monitor). * lternatively, an /V integrator can use T6 cables and adapter to extend the power relay data cable over distances more than 1.8 m or through conduits. Product pplication able Sharing with Touch ontrol Single Monitor pplication abling iagram workware Specification uide 13
Product pplication able Sharing with Touch ontrol Product pplication able Sharing with Touch ontrol Single Monitor Table Mount pplication able Sharing with Touch ontrol Single Monitor Table Mount pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: Switching TWRS _ 8 7 + (1) workware view + (1) Planes onference + 3 Step 4 - able Management: (1) )able ase TWRV Table Mount Single Table Interior Leg or Monitor TWRVTM_ (1) Wire Manager (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL ield Supplied omponents: able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) (1) MI able (1) Monitor orizontal TWRVW _ 8 (1) Power Relay dapter ord (300 mm long) L LNTS: Specify cable lengths to reach from reach from processor to the monitor. OPTIONL: (1) able Retractor TWRVR Table mount applications specified with longer tables may require the Power Relay ord be located farther than 1.8 m away from the Processor. These applications require replacing the standard 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (usually near the monitor). 14 workware Specification uide
Product pplication able Sharing with Touch ontrol able Sharing with Touch ontrol Single Monitor Wall Mount pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: Switching TWRS _ 3 + (1) workware view + (1) Planes onference + Structural Wall Mount TWRVWM_ Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require replacing the 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near the monitor). * lternatively, an /V integrator can use T6 cables and adapter to extend the power relay data cable over distances more than 1.8 m or through conduits. workware Specification uide 15 Table Interior Leg or ield Supplied omponents: 8 (1) Power Relay dapter ord (300 mm long) (1) MI able L LNT: MI able lengths should be specified to reach from processor to the monitor. (1) Power Relay ata able L LNTS: Specify RJ-12 cable lengths to reach from processor to the Power Relay ord (near monitor).* (1) Monitor (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL Wall mount applications may not require a table. 8 7 able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) Step 4 - able Management: (1) able ase TWRV OPTIONL: (1) able Retractor TWRVR Product pplication able Sharing with Touch ontrol Single Monitor Wall Mount pplication
Product pplication able Sharing with Touch ontrol Product pplication able Sharing with Touch ontrol ual Monitor pp Separately Specified omponents able Sharing with Touch ontrol ual Monitor pplication Sharing Method: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: dvantages: Separately Specified omponents: Switching TWRS _ SWITIN User udio/video able Options: MI NON SWITIN N / WX-0301- NO INTR Module W (switching) WX-0701-PS V+udio ield Supplied omponents: abled Sharing With Touch ontrol Presenters may access either monitor to share a presentation by connecting audio/video cables to their device and activating the cables corresponding button on the Touch ontrol. Touch ontrol Switching Users may switch the monitor presentation to other users by activating the corresponding button on the Touch ontrol. abled onnections (4 onnections Maximum) The Interface Module can accommodate a maximum of four audio/video cables. Touch ontrol Monitor power is controlled using the power button on the Touch ontrol. Plug and play access for cabled presenters (no software needed). Touch Pad allows easy switching between cabled presenters and presentation modes. Touch Pad/Processor supports Video onferencing Mode. + (1) workware view Table+ (1) Planes onference + Mount ual Monitor TWRVTM_ WVT-S-P With Shroud (1) workware view Structural Wall Mount ual Monitors Structural Walls TWRVWM_ WVT-N-P Without Shroud WV-SS-PP able accessories for Interface module switching (2) Power dapter ord National plug - I 13 Power cord onnects power relay cord to a power receptacle onnects workware process to a power receptacle (1) Power dapter ord National Power Receptacle (2) - I 14 splitter power cord onnects the power relay cord to the monitor/tv WX-0101-P Power cable WX-0101-P Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (2) MI able L LNTS: WX-0301- Specify cable lengths to reach from user s device to the video connection on the back of the monitors. Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ UW OPTIONL: (1) able Retractor TWRVR (2) Monitor 16 workware Specification uide
Product pplication able Sharing with Touch ontrol able Sharing with Touch ontrol ual Monitor pplication abling iagram User 1 User 2 User 3 User 4 1 9 10 4 Separately Specified omponents: Switching TWRS _ Switching Interface Module Includes: 1 (1) Interface Module Power ord (orded 3 m long) 2 (1) Processor 4 (1) Touch ontrol ata able (1.8 m long) 5 (1) Power Relay ord (1.5 m long) 6 (1) Power Relay ata able (1.8 m long) * User /V able Options May be specified with two or four of the following audio/video cables: 9 (2) MI able (3 m long) 10 (2) V+udio able (3 m long) 6 2 User 4 User 3 User 2 User 1 3 8 5 7 1! UTION ctive MI or irectional MI cables will cause damage to workware components and should not be used. o not use Power Relay with projectors, to allow proper cool down cycle for projector lamp. Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require replacing the 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer seperately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near the monitor). * lternatively, an /V integrator can use T6 cables and adapter to extend the power relay data cable over distances more than 1.8 m or through conduits. 1 ield Supplied omponents: (2) MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. (2) Monitor Monitor Includes: 1 Monitor Power ord (Lengths vary by manufacturer) + (1) workware view Table+ (1) Planes onference+ Mount ual Monitor TWRVTM_ (1) workware view Structural Wall Mount ual Monitors TWRVWM_ Table Interior Leg or able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ OPTIONL: (1) able Retractor TWRVR Product pplication able Sharing with Touch ontrol ual Monitor pplication abling iagram workware Specification uide 17
Product pplication able Sharing with Touch ontrol Product pplication able Sharing with Touch ontrol ual Monitor Table Mount pplication 18 workware Specification uide able Sharing with Touch ontrol ual Monitor Table Mount pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: Switching TWRS _ + (1) workware view Table+ (1) Planes onference + Mount ual Monitor TWRVTM_ 8 WOUL Table mount applications specified with longer tables may require the Power Relay ord be located farther than 1.8 m away from the Processor. These applications require replacing the standard 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer separately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (usually near the monitor). 7 3 Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT ield Supplied omponents: able accessories for Interface module switching (2) MI able L LNTS: Specify cable lengths to reach from user s device to the video connection on the back of the monitors. (2) Monitor Step 4 - able Management: 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) (1) able ase TWRV (1) Wire Manager orizontal TWRVW _ OPTIONL: (1) able Retractor TWRVR
Product pplication able Sharing with Touch ontrol able Sharing with Touch ontrol ual Monitor Wall Mount pplication See the abling iagram on the previous pages for a more detailed list of components. ield Supplied omponents: able accessories for Interface module switching 3 (1) Processor Power ord (1.8 m long) 7 (1) Power Relay dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) (2) MI able L LNT: MI able lengths should be specified to reach from processor to the monitor. (1) Power Relay ata able L LNTS: Specify RJ-12 cable lengths to reach from processor to the Power Relay ord (near monitor).* (2) Monitor Separately Specified omponents: Switching TWRS _ + 1) workware view Structural Wall Mount ual Monitors TWRVWM_ 3 + (1) Planes onference + Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL 8 7 Step 4 - able Management: (1) able ase TWRV OPTIONL: (1) able Retractor TWRVR Product pplication able Sharing with Touch ontrol ual Monitor Wall Mount pplication Wall mount applications may not require a table. Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require replacing the 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near the monitor). * lternatively, an /V integrator can use T6 cables and adapter to extend the power relay data cable over distances more than 1.8 m or through conduits. workware Specification uide 19
Product pplication Wireless Sharing Product pplication Wireless Sharing Single Monitor pplication Separately Specified omponents SWITIN Wireless Sharing Single Monitor pplication Sharing Method: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: Quad View eature: isplays four users on one screen. dvantages: Separately Specified omponents: (1) Wireless Module TWRW Non-Switching (optional) TWRN _ NON SWITIN ield Supplied omponents: NO INTR Module The Wireless Sharing application does not require an Interface Module consider this option if users require power access for their devices. (1) MI able L LNTS: Specify WX-0301- cable lengths to reach from Wireless Module to the video connection on the back of the monitor. Wireless Sharing Presenters use workware s Wireless Presentation Software to access the building s wireless wi-fi network which provides them audio/video access to the monitor to share presentations. Wireless Switching Users may switch between wireless presenters using controls on workware s Wireless Presentation Software (WPS). Wireless onnections (Unlimited number of wireless connections to the monitor) The maximum number of users that can log onto a wireless session is only limited by the capacity of the building s wireless network. Monitor Remote ontrol Monitor power is controlled using the monitor remote control (field supplied) or the power button on the monitor. Quad View is available for wireless users. Simple configuration. Mobility for wireless users. Wireless Presentation Software makes switching between presenters quick and easy. + (1) workware view + + Table Mount TWRVTM_ WVT-SS-P (1) workware view Structural Wall Mount TWRVWM_ WV-SSS-PP (1) Monitor (1) Planes onference Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL I Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ UW (1) ata able with RJ-45 onnectors (Required) L LNT: cable length should be specified to reach from the Wireless Module to the network connection point. 20 workware Specification uide
Product pplication Wireless Sharing Separately Specified omponents: (1) Wireless Module TWRW 1 Wireless Module Power ord (orded 1.5 m long) Wireless Sharing Single Monitor pplication abling iagram Non-Switching (optional) TWRN _ Non-Switching Interface Module Includes: 1 (1) Interface Module Power ord (orded 3 m long) 1 I 1 + + + (1) workware view (1) Planes onference (1)able ase Table Mount Table Interior Leg or TWRV TWRVTM_ (1) workware view Structural Wall Mount TWRVWM_ 2 ield Supplied omponents: I 1 (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (1) MI able L LNTS: Specify cable lengths to reach from Wireless Module to the MI connection on the back of the monitor. (1) Monitor Monitor Includes: 1 Monitor Power ord (Lengths vary by manufacturer) 2 Monitor Remote ontrol (Lengths vary by manufacturer) (1) Network Patch able with RJ-45 onnectors L LNTS: cable length should be specified to reach from the Wireless Module to the network connection point. Step 4 - able Management: (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ Wall mount applications may not require wire management. Product pplication Wireless Sharing Single Monitor pplication abling iagram The Wireless Sharing application does not require an Interface Module consider this option if users require power access for their devices. workware Specification uide 21
Product pplication Wireless Sharing Product pplication Wireless Sharing Single Monitor Table Mount pplication Separately Specified omponents: (1) Wireless Module TWRW Non-Switching (optional) TWRN _ Wireless Sharing Single Monitor Table Mount pplication See the abling iagram on the previous pages for a more detailed list of components. The Wireless Sharing application does not require an Interface Module consider this option if users require power access for their devices. 1 I 1 ield Supplied omponents: (1) MI able L LNTS: Specify cable lengths to reach from Wireless Module to the video connection on the back of the monitor. (1) Monitor I (1) Network Patch able with RJ-45 onnectors L LNTS: cable length should be specified to reach from the Wireless Module to the network connection point. + + + (1) workware view (1) Planes onference (1) able ase Table Mount Table Interior Leg or TWRV TWRVTM_ (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL Step 4 - able Management: (1) Wire Manager orizontal TWRVW _ 22 workware Specification uide
Product pplication Wireless Sharing Wireless Sharing Single Monitor Wall Mount pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: (1) Wireless Module TWRW Non-Switching (optional) TWRN _ ield Supplied omponents: (1) MI able L LNTS: Specify cable lengths to reach from Wireless Module to the video connection on the back of the monitor. (1) Monitor (1) Network Patch able with RJ-45 onnectors L LNTS: cable length should be specified to reach from the Wireless Module to the network connection point. + + + (1) workware view (1) Planes onference (1) able ase Table Interior Leg or TWRV Structural Wall Mount TWRVWM_ Step 4 - able Management: Product pplication Wireless Sharing Single Monitor Wall Mounted pplication The Wireless Sharing application does not require an Interface Module consider this option if users devices require power access. (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL Wall mount applications may not require a table. workware Specification uide 23
Product pplication Wireless Sharing Product pplication Wireless Sharing ual Monitor pplication Separately Specified omponents SWITIN Wireless Sharing ual Monitor pplication Sharing Method: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: Quad View eature: isplays four users on one screen. dvantages: Separately Specified omponents: (2) Wireless Module TWRW Non-Switching (optional) TWRN _ The Wireless Sharing application does not require an Interface Module consider this option if users require power access for their devices. ield Supplied omponents: NON SWITIN NO INTR Module (2) MI able L LNTS: Specify WX-0301- cable lengths to reach from Wireless Module to the video connection on the back of the monitor. Wireless Sharing Presenters use workware s Wireless Presentation Software to access the building s wireless wi-fi network which provides them audio/video access to the monitor to share presentations. Wireless Switching Users may switch between wireless presenters using controls on workware s Wireless Presentation Software (WPS). Wireless onnections (Unlimited number of wireless connections to the monitor) The maximum number of users that can log onto a wireless session is only limited by the capacity of the building s wireless network. Monitor Remote ontrol Monitor power is controlled using the monitor remote control (field supplied) or the power button on the monitor. Quad View is available for wireless users. Simple configuration. Mobility for wireless users. Wireless Presentation Software makes switching between presenters quick and easy. + (1) workware view Table+ (1) Planes onference + Mount ual Monitor TWRVTM_ WVT-S-P With Shroud (1) workware view Structural Wall Mount Structural Walls ual Monitors TWRVWM_ WVT-N-P Without Shroud WV-SS-PP Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ UW (2) Monitors I (2) ata able with RJ-45 onnector (Required) L LNT: cable length should be specified to reach from the Wireless Module to the network connection point. 24 workware Specification uide
Product pplication Wireless Sharing 1 I Wireless Sharing ual Monitor pplication abling iagram 1 Separately Specified omponents: (2) Wireless Module TWRW 2 1 Wireless Module Power ord (1.5 m long) Non-Switching (optional) TWRN _ Non-Switching Interface Module Includes: 1 (1) Interface Module Power ord (orded 3 m long) 1 2 + + + (1) workware view (1) (1) able ase Table Mount ual Table Planes Interior onference Leg or TWRV Monitor TWRVTM_ (1) workware view Structural Wall Mount ual Monitors TWRVWM_ 1 (1) Infinity onference (oat shaped or Rectangular) WOUT ield Supplied omponents: (2) MI able L LNTS: Specify cable lengths to reach from Wireless Module to the video connection on the back of the monitor. (2) Monitors Monitor Includes: 1 Monitor Power ord (Lengths vary by manufacturer) 2 Monitor Remote ontrol (Lengths vary by manufacturer) I (2) Network Patch able with RJ-45 onnectors L LNTS: cable length should be specified to reach from the Wireless Module to the network connection point. Step 4 - able Management: (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ Wall mount applications may not require wire management. Product pplication Wireless Sharing ual Monitor pplication abling iagram The Wireless Sharing application does not require an Interface Module consider this option if users require power access for their devices. workware Specification uide 25
Product pplication Wireless Sharing Product pplication Wireless Sharing ual Monitor Table Mount pplication Wireless Sharing ual Monitor Table Mount pplication See the abling iagram on the previous pages for a more detailed list of components. (2) Wireless Module TWRW Separately Specified omponents: Non-Switching (optional) TWRN _ The Wireless Sharing application does not require an Interface Module consider this option if users require power access for their devices. + + + (1) workware view (1) Planes onference (1) able ase Table Mount ual Table Interior Leg or TWRV Monitor TWRVTM_ I (1) Infinity onference (oat shaped or Rectangular) WOUT ield Supplied omponents: (2) MI able L LNTS: Specify cable lengths to reach from Wireless Module to the video connection on the back of the monitor. (2) Monitors I (2) Network Patch able with RJ-45 onnectors L LNTS: cable length should be specified to reach from the Wireless Module to the network connection point. Step 4 - able Management: (1) Wire Manager orizontal TWRVW _ 26 workware Specification uide
Product pplication Wireless Sharing Wireless Sharing ual Monitor pplication Wall Mount pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents: (2) Wireless Module TWRW Non-Switching (optional) TWRN _ The Wireless Sharing application does not require an Interface Module consider this option if users require power access for their devices. + + + (1) able ase (1) workware view (1) Planes onference Structural Wall Mount Table Interior Leg or TWRV ual Monitors TWRVWM_ (1) Infinity onference (oat shaped or Rectangular) WOUT Wall mount applications may not require a table. ield Supplied omponents: (2) MI able L LNTS: Specify cable lengths to reach from Wireless Module to the video connection on the back of the monitor. (2) Monitor (2) Network Patch able with RJ-45 onnectors L LNTS: cable length should be specified to reach from the Wireless Module to the network connection point. Step 4 - able Management: Product pplication Wireless Sharing ual Monitor Wall Mount pplication workware Specification uide 27
Product pplications Wireless Sharing with able ackup Product pplication Wireless Sharing with able ackup Single Monitor pp Separately Specified omponents 28 workware Specification uide Wireless Sharing with able ackup Single Monitor pplication Sharing Methods: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: Quad View eature: isplays four users on one screen. dvantages: Separately Specified omponents: Switching TWRS _ SWITIN NON SWITIN User udio/video able Options: WX-0301- N / NO INTR Module W (switching) V+udio (1) Wireless Module TWRW WX-0701-PS ield Supplied omponents: Wireless Sharing With Touch ontrol Using the Touch ontrol, users may switch the system to wireless mode and use workware s Wireless Presentation Software to access the building s wireless wi-fi network which provides them audio/video access to the monitor to share presentations. abled Sharing With Touch ontrol Presenters may access the monitor to share a presentation by connecting audio/video cables to their device and activating the cables corresponding button on the Touch ontrol. Touch ontrol Switching Users may switch the monitor presentation to other users by activating the corresponding button on the Touch ontrol. Wireless Switching When the Wireless Mode is active, users may switch between wireless presenters using controls on workware s wireless presentation software. abled onnections (Maximum of 4 cabled connections) The Interface Module can accommodate a maximum of four audio/video cables. Wireless onnections (Unlimited number of wireless connections to the monitor) The maximum number of wireless users is only limited by the capacity of the building s wireless network. Touch ontrol Monitor power is controlled using the power button on the Touch ontrol. Quad View is available for wireless users only. Mobility for wireless users. Plug and play access for cabled users - no software needed. Touch Pad allows easy switching between cabled presenters and presentation modes. Touch Pad/Processor supports Video onferencing Mode. + (1) workware view + (1) Planes onference + Table Mount TWRVTM_ WVT-SS-P (1) workware view Structural Wall Mount TWRVWM_ WV-SSS-PP able accessories for Interface module switching (2) Power dapter ord National plug - I 13 Power cord onnects power relay cord to a power receptacle onnects workware process to a power receptacle (1) Power dapter ord National Power Receptacle (2) - I 14 splitter power cord WX-0101-P onnects the power relay cord to the monitor/tv WX-0101-P Power cable (1) MI able (1 m long) WX-0301- Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (1) MI able L LNTS: Specify WX-0301- cable lengths to reach from processor to the video connection on the back of the monitor. Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ (1) Monitor UW OPTIONL: (1) able Retractor TWRVR I (1) ata able with RJ-45 onnectors (Required) L LNT: cable length should be specified to reach from the Wireless Module to the network connection point.
Product pplications Wireless Sharing with able ackup Wireless Sharing with able ackup Single Monitor pplication abling iagram User 1 User 2 User 3 User 4 1 10 Separately Specified omponents: Switching TWRS _ Switching Interface Module Includes: 1 (1) Interface Module Power ord (orded 3 m long) 2 (1) Processor 4 (1) Touch ontrol ata able (1.8 m long) 5 (1) Power Relay ord (1.5 m long) 6 (1) Power Relay ata able (1.8 m long)* User /V able Options Interface Module may be specified with two or four MI and/or V+udio cables (See port options page for more details). 11 10 (2) MI able (3 m long) 11 (2) V+udio able (3 m long) (1) Wireless Module TWRW 1 Wireless Module Power able (1.5 m long) 4 3 6 2 9 User 4 User 3 User 2 User 1 I 8 5 7 + + + (1) workware view (1) Planes onference (1)able ase Table Mount Table Interior Leg or TWRV TWRVTM_ (1) workware view Structural Wall Mount TWRVWM_ 1 (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _! UTION ctive MI or irectional MI cables will cause damage to workware components and should not be used. o not use Power Relay with projectors, to allow proper cool down cycle for projector lamp. (1) MI able (1) Monitor Monitor Includes: 1 Monitor Power ord (Lengths vary by manufacturer) L LNTS: Specify cable lengths to reach from processor to the video connection on the back of the monitor. (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL ield Supplied omponents: able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) Wall mount applications may not require a table. 8 (1) Power Relay dapter ord (300 mm long) 9 (1) MI able (1 m long) I (1) ata able with RJ-45s onnector L LNT: able lengths should be specified to reach from Wireless Module to the network connection point. Step 4 - able Management: OPTIONL: (1) able Retractor TWRVR Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require the 1.8 m Power Relay ata able (included with the Switching Interface Module) be replaced with a longer separately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near monitor). * lternatively, an /V integrator can use T6 cables and adapter to extend the power relay data cable over distances more than 1.8 m or through conduits. Product pplication Wireless Sharing with able ackup Single Monitor pplication abling iagram workware Specification uide 29
Product pplications Wireless Sharing with able ackup Product pplication Wireless Sharing with able ackup Single Monitor Table Mount pplication Wireless Sharing with able ackup Single Monitor Table Mount pplication See the abling iagram on the previous pages for a more detailed list of components. Separately Specified omponents : Switching TWRS _ (1) Wireless Module TWRW 8 3 7 Table mount applications specified with longer tables may require the Power Relay ord be located farther than 1.8 m away from the Processor. These applications require replacing the standard 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer separately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (usually near the monitor). 9 + + + (1) workware view (1) Planes onference (1)able ase Table Mount Table Interior Leg or TWRV TWRVTM_ I (1) MI able L LNTS: Specify cable lengths to reach from processor to the video connection on the back of the monitor. (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL ield Supplied omponents: (1) Monitor (1) Wire Manager orizontal TWRVW _ able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) 9 (1) MI able (1 m long) Step 4 - able Management: OPTIONL: (1) able Retractor TWRVR I (1) ata able with RJ-45 onnectors L LNT: able lengths should be specified to reach from Wireless Module to the network connection point. 30 workware Specification uide
Product pplications Wireless Sharing with able ackup Separately Specified omponents : Wireless Sharing with able ackup Single Monitor Wall Mount pplication See the abling iagram on the previous pages for a more detailed list of components. Switching TWRS _ (1) Wireless Module TWRW I 9 3 (1) workware view Structural Wall Mount TWRVWM_ (1) MI able (1) Planes onference + + Table Interior Leg or + 8 Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require the 1.8 m Power Relay ata able (included with the Switching Interface Module) be replaced with a longer separately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near monitor). * lternatively, an /V integrator can use T6 cables and adapter to extend the power relay data cable over distances more than 1.8 m or through conduits. workware Specification uide 31 L LNTS: Specify cable lengths to reach from processor to the video connection on the back of the monitor. 7 (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL Wall mount applications may not require a table. ield Supplied omponents: able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) 9 (1) MI able (1 m long) (1) Power Relay ata able * L LNTS: Specify cable lengths to reach from processor to the Power Relay ord (near monitor). (1) Monitor (1) ata able with RJ-45 onnectors L LNT: able lengths should be specified to reach from Wireless Module to the network connection point. Step 4 - able Management: (1) able ase TWRV OPTIONL: (1) able Retractor TWRVR Product pplication Wireless Sharing with able ackup Single Monitor Wall Mount pplication
Product pplications Wireless Sharing with able ackup Product pplication Wireless Sharing with able ackup ual Monitor pp Separately Specified omponents Wireless Sharing with able ackup ual Monitor pplication Sharing Methods: ow users share their presentation on the Monitor. Switching Method: ow users switch the monitor presentation to other users. Maximum Number of onnections to the Monitor: Monitor Power ontrol: Quad View eature: isplays four users on one screen. dvantages: Separately Specified omponents: Switching TWRS _ SWITIN User udio/video able Options: MI NON SWITIN WX-0301- N / NO INTR Module W (switching) WX-0701-PS V+udio (1) Wireless Module TWRW ield Supplied omponents: Wireless Sharing With Touch ontrol Using the Touch ontrol, users may switch the system to wireless mode and use workware s Wireless Presentation Software to access the building s wireless wi-fi network which provides them audio/video access to the monitor to share presentations. abled Sharing With Touch ontrol Presenters may access the monitor to share a presentation by connecting audio/video cables to their device and activating the cables corresponding button on the Touch ontrol. Touch ontrol Switching Users may switch the monitor presentation to other users by activating the corresponding button on the Touch ontrol. Wireless Switching When the Wireless Mode is active, users may switch between wireless presenters using controls on workware s wireless presentation software. abled onnections (Maximum of 4 cabled connections) The Interface Module can accommodate a maximum of four audio/video cables. Wireless onnections (Unlimited number of wireless connections to the monitor) The maximum number of wireless users is only limited by the capacity of the building s wireless network. Touch ontrol Monitor power is controlled using the power button on the Touch ontrol. Quad View is available for wireless users only. Mobility for wireless users. Plug and play access for cabled users - no software needed. Touch Pad allows easy switching between cabled presenters and presentation modes. Touch Pad/Processor supports Video onferencing Mode. + (1) workware view Table+ (1)Planes onference + Mount ual Monitor TWRVTM_ WVT-S-P With Shroud (1) workware view Structural Wall Mount Structural Walls ual Monitors TWRVWM_ WVT-N-P Without Shroud WV-SS-PP able accessories for Interface module switching (2) Power dapter ord National plug - I 13 Power cord onnects power relay cord to a power receptacle onnects workware process to a power receptacle (1) Power dapter ord National Power Receptacle (2) - I 14 splitter power cord onnects the power relay cord to the monitor/tv WX-0101-P Power cable (1) MI able (1 m long) Table Interior Leg or (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (2) MI able L LNTS: Specify WX-0301- cable lengths to reach from processor to the video connection on the back of the monitor. Step 4 - able Management: (1) able ase TWRV (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ UW OPTIONL: (1) able Retractor TWRVR (2) Monitor I (1) ata able with RJ-45 onnectors (Required) L LNT: cable length should be specified to reach from the Wireless Module to the network connection point. 32 workware Specification uide WX-0301-
Product pplications Wireless Sharing with able ackup Wireless Sharing with able ackup ual Monitor pplication abling iagram User 1 User 2 User 3 User 4 1 Separately Specified omponents: 10 Switching TWRS _ Switching Interface Module Includes: 1 (1) Interface Module Power ord (orded 3 m long) 2 (1) Processor 4 (1) Touch ontrol ata able (1.8 m long) 5 (1) Power Relay ord (1.5 m long) 6 (1) Power Relay ata able (1.8 m long) User /V able Options hoice of up to four MI and/or V+udio cables. 10 (2) MI able (3 m long) 11 (2) V+udio able (3 m long) 11 4 6 9 1 2 User 4 User 3 User 2 User 1 3 I 8 5 7 + + + (1) workware view Table (1) )Planes onference (1)able ase Mount ual Monitor Table Interior Leg or TWRV TWRVTM_ (1) workware view Structural Wall Mount ual Monitors TWRVWM_ (2) MI able L LNTS: Specify cable lengths to reach from processor to the video connection on the back of the monitor. 1 (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL 1 ield Supplied omponents: able accessories for Interface module switching 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) 9 (1) MI able (1 m long) Step 4 - able Management: (1) Wire Manager orizontal (not required with wall mount applications) TWRVW _ OPTIONL: (1) able Retractor TWRVR! UTION ctive MI or irectional MI cables will cause damage to workware components and should not be used. o not use Power Relay with projectors, to allow proper cool down cycle for projector lamp. (1) Monitor Monitor Includes: 1 Monitor Power ord (Lengths vary by manufacturer) I (1) ata able with RJ-45s onnector L LNT: able lengths should be specified to reach from Wireless Module to the network connection point. Product pplication Wireless Sharing with able ackup ual Monitor pplication abling iagram (1) Wireless Module TWRW 1 Wireless Module Power ord (1.5 m long) Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require replacing the 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer separately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near the monitor). workware Specification uide 33
Product pplication Wireless Sharing with able ackup ual Monitor Table Mount pplication Product pplications Wireless Sharing with able ackup Wireless Sharing with able ackup ual Monitor Table Mount pplication See the abling iagram on the previous pages for a more detailed list of components. 34 workware Specification uide or a more detailed list of the cables, and cords included with each component see the cabling diagram for this application on the previous pages. Separately Specified omponents : Switching TWRS _ (1) Wireless Module TWRW 8 9 3 7 able accessories for Interface module switching I 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) 9 (1) MI able (1 m long) + + + (1) workware view (1) Planes onference (1)able ase Table Mount Table Interior Leg or TWRV ual Monitor TWRVTM_ (1) Wire Manager orizontal TWRVW _ ield Supplied omponents: Step 4 - able Management: Table mount applications specified with longer tables may require the Power Relay ord be located farther than 1.8 m away from the Processor. These applications require replacing the standard 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer separately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (usually near the monitor). (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL (2) MI able L LNTS: Specify cable lengths to reach from processor to the video connection on the back of the monitor. (2) Monitors OPTIONL: (1) able Retractor TWRVR I (1) ata able with RJ-45 onnectors L LNT: able lengths should be specified to reach from Wireless Module to the network connection point.
Product pplications Wireless Sharing with able ackup Separately Specified omponents : Switching TWRS _ (1) Wireless Module TWRW (1) Power Relay ata able (See below) * L LNTS: Specify cable lengths to reach from the processor to the Power Relay ord (near the monitor). Wireless Sharing with able ackup ual Monitor Wall Mount pplication See the abling iagram on the previous pages for a more detailed list of components. 9 3 able accessories for Interface module switching (1) workware view Structural Wall Mount + (1) Planes onference + Table Interior Leg or + ual Monitors TWRVWM_ I 3 7 (2) Power dapter ord (1.8 m long) 8 (1) Power Relay dapter ord (300 mm long) 9 (1) MI able (1 m long) Step 4 - able Management: (1) able ase TWRV Wall mount applications may not require a table. Wall mount applications locate the Power Relay ord near the monitor and away from the Processor. These applications require replacing the 1.8 m Power Relay ata able (included with the Switching Interface Module) with a longer separately field supplied Power Relay ata able. The cable must be specified with sufficient length to reach from the Processor to the location of the Power Relay ord (near the monitor). * lternatively, an /V integrator can use T6 cables and adapter to extend the power relay data cable over distances more than 1.8 m or through conduits. ield Supplied omponents: (1) Infinity onference (oat shaped or Rectangular) WOUT WOUL 8 7 (2) MI able L LNTS: Specify cable lengths to reach from processor to the video connection on the back of the monitor. (2) Monitors I (1) ata able with RJ-45 onnectors L LNT: able lengths should be specified to reach from Wireless Module to the network connection point. OPTIONL: (1) able Retractor TWRVR Product pplication Wireless Sharing with able ackup ual Monitor Wall Mount pplication workware Specification uide 35