SELF-INSTALLATION INSTRUCTIONS

Transcription

1 SELF-INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN, DISCONNECT ALL OF THE EXISTING TV EQUIPMENT THROUGHOUT YOUR HOME THEN, INSTALL TODAY AND ENJOY FiOS RIGHT AWAY! ENCLOSED ITEMS YOU MAY NEED FOR INSTALLATION FiOS EQUIPMENT FiOS ROUTER + POWER CORD You will receive one of the two router models shown below. CABLES AND CONNECTORS VIDEO MEDIA SERVER + POWER CORD SPECIAL ORDER ETHERNET CABLE (6') COMPOSITE CABLES HDMI CABLE COAX CABLE(S) CABLE BARREL CONNECTOR DIGITAL ADAPTER -WAY SPLITTER CableCARD MEDIA CLIENT + POWER CORD FiOS TV REMOTE

2 BEFORE YOU BEGIN, DISCONNECT ALL OF THE EXISTING TV EQUIPMENT THROUGHOUT YOUR HOME STEP FiOS ROUTER SETUP NOTE Models vary, but connections are the same on all models. STEP A: FiOS ROUTER SETUP Coax Cable Coax Cable to FiOS Router Power Cord OPTIONAL: For a WIRED Internet setup, connect the Ethernet cable from the router to your computer. OPTIONAL: If a TV will be connected to the same coax wall outlet as your router, connect a -way splitter as shown. Lights on the FiOS Quantum Gateway will turn white once activated. (This may take up to 6 minutes). NOTE: Details about router placement and Wi-Fi signal strength are available at verizon.com/fioshomenetwork. If you have a different router model, turn the router ON to begin activation. STEP B: WIRELESS SETUP. On the FiOS Router, locate the Wi-Fi label for your Wireless Network Name (ESSID) and Wireless Password (WPA).. Launch your device s wireless application. Select Wireless Network Name (ESSID) and then Connect.. When prompted, enter the Wireless Password (WPA), as it appears on your router s label (case sensitive). Then select Connect. STEP C: INTERNET SETUP. Open an Internet browser and go to activatemyfios.verizon.net.. Follow the Setup Web Site to activate your Verizon account.

3 STEP VIDEO MEDIA SERVER SETUP NOTE We recommend connecting this to your main TV. STEP A: CONNECT YOUR VIDEO MEDIA SERVER Power Cord Coax Cable to Router Back of TV OPTIONAL Coax Cable HDMI Cable STEP B: ACTIVATE YOUR VIDEO MEDIA SERVER Turn on your Video Media Server and your TV. Then, using your FiOS TV Remote, follow the instructions shown on your TV screen.

4 STEP MEDIA CLIENT SETUP STEP A: CONNECT YOUR MEDIA CLIENT USING HDMI CABLE (PREFERRED) Power Cord Back of TV Coax Cable HDMI Cable

5 IMPORTANT DO NOT install Media Clients until after you ve installed and activated your Video Media Server(s). ALTERNATE OPTION: USING COMPOSITE CABLES Power Cord Composite Cables Coax Cable Back of TV STEP B: ACTIVATE YOUR MEDIA CLIENT Turn on your Media Client and your TV. Then, using your FiOS TV Remote, follow the instructions shown on your TV screen.

6 STEP 4 DIGITAL ADAPTER AND CABLECARD SETUP (If special ordered) STEP 4A: CONNECT YOUR DIGITAL ADAPTER Power Cord Back of TV Coax Cable Digital Adapter Coax Cable STEP 4B: ACTIVATE YOUR DIGITAL ADAPTER. Turn on the Digital Adapter by pressing the Set Top Box button on the FiOS TV Remote Control.. Turn on your TV and tune to Channel, either manually or with the remote control that came with your TV.. To complete activation, call the Verizon Support Center at and provide the Digital Adapter serial numbers. INSTALLING YOUR CABLECARD. Read through the instructions for your CableCARD-ready device and complete any setup.. When the CableCARD is inserted, follow the on-screen instructions.. When prompted, enter the activation code on your Verizon Customer Receipt. 4. Select which method of activation you prefer and follow the instructions. a. Visit verizon.com/fiostv/selfinstall b. By phone at CableCARD

7 VISIT activatemyfios.verizon.net to access the Self-Install Wizard CALL.800.VERIZON ( ) To order extra remotes or cables, visit verizon.com/fiosaccessories

8 045 VMSNCMG Verizon. All Rights Reserved. FiOS VMS NEW MINI SI POST