CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque * 6,000 rpm high-performance spindle T e c h n i c a l D a t a s h e e t
THK NR type linear guides for heavy processing, high axial load capacity and rapid movement High-precision guides, ideal for fast speeds and high positioning accuracy and repeatability The ideal dynamic properties of the type NR and resistance to vibrations and shock loads are the preferred parameters for use in machine tools. Compared to roller bearing guides the static load ratings are higher, although the type NR has a more compact design Standard configuration: 4 Mitsubishi CNC control with Navi Mill 4 Main spindle with 26/32 kw 4 Torque on the spindle 688/828 Nm 4 Taper 50 / DIN or MAS BT 4 Tempered 2-speed gears 4 Hinged chip conveyor with 2 snails in the Y-axis 4 Oil mist exhaust ventilation 4 Automatic tool changer armtype (28 seats) 4 Cabinet with a heat exchanger 4 RS232 interface Ethernet, CF 4 Halogen workroom light 4 Warning light 4 Full protection enclosure 4 Spindle blowout device 4 Coolant around the spindle 4 Automatic lubrication 4 KTR Couplings 4 Portable electric handwheel 4 Compressed air gun 4 Coolant spray gun 4 Chip collecting container 4 Operating tool 4 Machine feet 4 Manual Optional configuration: n CNC control Siemens / Fanuc / Heidenhain n HSK taper 100 n Automatic tool measurement and breakage detection n Automatic workpiece centering & coordinate rotation n Linear scales on all axes n IKZ to 70 bar n Cold air nozzle with 4-6 degree air exit n 4 and 5-axis n Oil separator n Optical glass scales n Stand-alone control panel Brankamp Machine- and collision monitoring NC-Trainer
The high-quality MEEHANITE casting ensures a long-lasting stability and accuracy. Each Alpha Center cast frame has been tested in the production of authorized Meehanite foundries and logged Spindle cartridges Advanced eco-friendly coolant Belt drive Direct drive Technical specifications Alpha-Center HD 1400 1600 1800 2200 2600 3000 X-axis travel 1400 (55.11 ) 1630 (64.17 ) 1800 (70.86 ) 2200 (86.61 ) 2600 (102.36 ) 3050 (120.07 ) Y-axis travel 720 (28.34 ) 860 (33.85 ) 980 (38.58 ) 1060 (41.73 ) Z-axis travel 650 (25.59 ) 800 (31.49 ) 850 (33.46 ) 990 (38.97 ) Spindle-to-table distance 150-770 (5.90-30.31 ) 110-910 (4.33-35.82 ) 110-960 (4.33-37.79 ) 120-1110 (4.72-43.70 ) Distance center spindle Z-axis cover 745 (29.33 ) 910 (35.82 ) 1030 (40.55 ) 1120 (44.09 ) Table-dimensions 1550x700 1700x815 1900x900 2400x1000 2700x1000 3100x1000 (61.02x27.55 ) (66.92x32.08 ) (74.80x35.43 ) (94.48x39.37 ) (106.29x39.37 ) (122.04x39.37 ) Dimensions of T-slot 18x130x5 18x150x5 18x150x6 (0.70x5.11x0.19 ) (0.70x5.90x0.19 ) (0.70x5.90x0.23 ) 22x150x6 (0.86x5.90x0.23 ) Max. table load capacity kg 1600 (3,520 lbs) 2100 (4,620 lbs) 3000 (6,600 lbs) 4000 (8,800 lbs) 4200 (9,240 lbs) 4500 (9,900 lbs) Max. Spindle speed kw 22 (29 Hp) Spindle speed rpm 6.000 Spindle taper BT50 Rapid X-, Y-, Z-axis m/min 15, 15 (585 /min), 12 (468 /min) Feed rate X-,Y-, Z-axis m/min 7, 7, 7 (273 /min) Positioning accuracy ±0.005 (0.0004 ) Repeatability ±0.003 (0.0001 ) Tool places pc. Arm 28 Chain 40 Max. tool diameter 90 (3.54 ) 127 (5 ) Max. tool diameter without adjacent tool 180 (7.08 ) 229 (9.01 ) Max. tool length 350 (13.78 ) Max. tool weight kg 15 (33 lbs) 18 (36.6 lbs) Tool change time Sec. 3.8 4.2 Capacity of the coolant tank Liter 300 (79 gal) 500 (132 gal) 620 (163 gal) Chip disposal Chip conveyor chain Air pressure kg/cm 2 7 Voltage KVA 28 35 Floorspace 5050x3430 5800x3470 6000x3828 7050x3850 7800x4500 8700x4500 (198.81 x135.03 ) (228.34x136.61 ) (236.22x150.70 ) (277.55x151.57 ) (307.08x177.16 ) (342.52x177.16 ) Weight kg 12500 (27,500 lbs) 14200 (31,240 lbs) 16800 (36,960 lbs) 20600 (45,320 lbs) 24320 (53,504 lbs) 25300 (55,660 lbs) Item-No. 6730007 6730008 6730009 6730010 6730011 6730012
2-speed gears The 2-speed gearbox is controlled by M-function. A headstock temperature control system guarantees no expansion of the main spindle unit, even after intensive heavy machining. Machinery construction All guideways are precision ground and hardened. The Y-axis has a 4 guideways. The ball screw mounts, as well as the axis motor flanges are an integral part of the casting which ensures an extremely rigid and precise axle movement, even for workpieces weighing up to 4.5t Ballscrew mounts are an integral part of the casting Control options Heidenhain Fanuc Mitsubishi
Various options for 4th & 5th axis Thermal stability by 3 separate cooling circuits The high-performance cooling system ensures optimum temperature stability of the main spindle (cooling circuit 1 & 2) and in parallel with circuit 3, it prevents a heat transfer of the main motor to the spindle. This innovative system ensures constant temperature conditions and high-precision milling. KTR couplings In all machines of the new Alpha Center series quality ROTEX GS KTR couplings are used. Coupling description ROTEX GS is a three-part, free of play under pretension, axial plug coupling. For critical applications they offer backlash-free torque transmission with rigidity and vibration damping. All machining centers measured by VDI DGQ 3441 and compensated Even a QC 10-circle shape is done