Before you can use the machine, read this Quick Setup Guide for the correct setup and installation.



Similar documents
Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation.

the machine and check the components Black Yellow Cyan Magenta Starter Ink Cartridges Product Registration Sheet (USA only)

Start Here. Quick Setup Guide MFC-8710DW MFC-8810DW MFC-8910DW. the machine and check the components

the machine and check the components Starter Ink Cartridges Basic User s Guide Product Safety Guide Telephone Line Cord

Start Here. Quick Setup Guide. the machine and check the components DCP-9020CDW

the machine and check the components

Start Here. Quick Setup Guide. the machine and check the components. NOTE Not all models are available in all countries.

Student Access to Virtual Desktops from personally owned Windows computers

the machine and check the components Black Yellow Cyan Magenta Product Registration Sheet (USA only)

Start Here. Quick Setup Guide. the machine and check the components. NOTE Not all models are available in all countries.

the machine and check the components Black Yellow Cyan Magenta

the machine and check the components Black Yellow Cyan Magenta

McAfee Network Security Platform

Telephone Line Types and Tips

the machine and check the components Starter Ink Cartridges Basic User s Guide Product Safety Guide Telephone Line Cord

How To Organize A Meeting On Gotomeeting

ORGANIZER QUICK REFERENCE GUIDE

the machine and check the components

Start Here. IMPORTANT: To ensure that the software is installed correctly, do not connect the USB cable until step 17. Remove tape and cardboard

Please read the Product Safety Guide first before you set up your machine. Then, read this Quick Setup Guide for the correct setup and installation.

the machine and check the components

VMware Horizon FLEX Administration Guide

Introductory Information. Setup Guide. Introduction. Space Required for Installation. Overview of Setup. The Manuals Supplied with This Printer ENG

the machine and check the components Starter Ink Cartridges Basic User s Guide Product Safety Guide Telephone Line Cord

VMware Horizon FLEX Administration Guide

the machine and check the components

the machine and check the components

the machine and check the components Drum Unit Assembly (including Standard Toner Cartridge)

Enterprise Digital Signage Create a New Sign

Architecture and Data Flows Reference Guide

Active Directory Service

GENERAL OPERATING PRINCIPLES

UNIVERSITY AND WORK-STUDY EMPLOYERS WEBSITE USER S GUIDE

KEY SKILLS INFORMATION TECHNOLOGY Level 3. Question Paper. 29 January 9 February 2001

New Internet Radio Feature

License Manager Installation and Setup

Series. Setup Guide. (P.4) +800mm MEMO

AntiSpyware Enterprise Module 8.5

Wireless Networking Guide

Welch Allyn CardioPerfect Workstation Installation Guide

the printer and check the components

7 Press or to choose Infrastructure, then press OK.

NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server

- DAY 1 - Website Design and Project Planning

Quick Setup Guide MFC-685CW STEP 1 STEP 2. Setup is Complete! Setting Up the Machine. Installing the Driver & Software

NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server

Data Security 1. 1 What is the function of the Jump instruction? 2 What are the main parts of the virus code? 3 What is the last act of the virus?

Network User s Guide

OxCORT v4 Quick Guide Revision Class Reports

JCM TRAINING OVERVIEW Multi-Download Module 2

ORGANIZER QUICK START GUIDE

INSTALLATION, OPERATION & MAINTENANCE

OUTLINE SYSTEM-ON-CHIP DESIGN. GETTING STARTED WITH VHDL August 31, 2015 GAJSKI S Y-CHART (1983) TOP-DOWN DESIGN (1)

EasyMP Network Projection Operation Guide

Quick Reference Guide: One-time Account Update

CallPilot 100/150 Upgrade Addendum

Qualmark Licence Agreement

BEC TESTS Gli ascolti sono disponibili all indirizzo

1 GSW IPv4 Addressing

Application Note Configuring Integrated Windows Authentication as a McAfee Firewall Enterprise Authenticator. Firewall Enterprise

Section 5.2, Commands for Configuring ISDN Protocols. Section 5.3, Configuring ISDN Signaling. Section 5.4, Configuring ISDN LAPD and Call Control

NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Ethernet Multi-function Print Server

MFC6490CW Windows Network Connection Repair Instructions

National Firefighter Ability Tests And the National Firefighter Questionnaire

STEP 1. Setting Up the Machine STEP 2. Installing the Driver & Software. Setup is Complete!

Chapter. Contents: A Constructing decimal numbers

The art of Paperarchitecture (PA). MANUAL

Network User s Guide

Data Quality Certification Program Administrator In-Person Session Homework Workbook

European Convention on Products Liability in regard to Personal Injury and Death

Experiment 6: Friction

NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Print Server and Wireless Ethernet Print Server

7 mm Diameter Miniature Cermet Trimmer

NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless Multi-function Print Server

Network User s Guide

Morgan Stanley Ad Hoc Reporting Guide

Quick Guide to Lisp Implementation

Quick Setup Guide MFC-240C STEP 1 STEP 2. Setup is Complete! Setting Up the Machine. Installing the Driver & Software

Summary of ALL Key-Pad entries

SOLVING EQUATIONS BY FACTORING

Network User s Guide

2. Use of Internet attacks in terrorist activities is termed as a. Internet-attack b. National attack c. Cyberterrorism d.

MFC7840W Windows Network Connection Repair Instructions

Easy Interactive Tools Ver.3.0 Operation Guide

European Convention on Social and Medical Assistance

LISTENING COMPREHENSION

SECTION 7-2 Law of Cosines

VMware Horizon Mirage Web Manager Guide

HP Application Lifecycle Management

NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Multi-function Print Server and Wireless (IEEE b/g) Ethernet Multi-function Print Server

STRM Log Manager Installation Guide

StyleView SV32 Change Power System Batteries

FUEL SYSTEMS ROCHESTER 4 BARREL CARBURETOR 5 C

Tablet Charging Wall Mount 12

Technical manual for Multi Apartment Gateway 1456B Passion.Technology.Design.

Reasoning to Solve Equations and Inequalities

1. Definition, Basic concepts, Types 2. Addition and Subtraction of Matrices 3. Scalar Multiplication 4. Assignment and answer key 5.

Architecture and Data Flows Reference Guide

Engineer-to-Engineer Note

KNOWING YOUR SEWING MACHINE SEWING BASICS VARIOUS STITCHES APPENDIX

Transcription:

Quik Setup Guide Strt Here MFC-490CW Before you n use the mhine, red this Quik Setup Guide for the orret setup nd instlltion. WARNING Wrnings tell you wht to do to prevent possile personl injury. Importnt DO NOT onnet the USB le yet (if you re using USB le). Unpk the mhine nd hek the omponents 2 Blk Yellow Cyn Mgent Strter Ink Crtridges [x4] Quik Setup Guide User s Guide CD-ROM Aessory Order Form WARNING Test Sheet (USA only) Telephone Line Cord d Plsti gs re used in the pkging of your mhine. To void dnger of suffotion, plese keep these gs wy from ies nd hildren. Remove the protetive tpe nd film overing the snner glss. Remove the green protetive pking y lifting the front of the mhine nd then pulling down on the pking prt. Remove the plsti g ontining the ink rtridges from on top of the pper try. Mke sure you hve ll omponents. The omponents inluded in the ox my differ depending on your ountry. Sve ll pking mterils nd the ox in se for ny reson you must ship your mhine. You need to purhse the orret interfe le for the interfe you wnt to use (for USB or network onnetion). USB le Plese mke sure you use USB 2.0 le (Type A/B) tht is no more thn 6 feet (2 meters) long. Network le Use stright-through Ctegory5 (or greter) twisted-pir le for 0BASE-T or 00BASE-TX Fst Ethernet Network. USA/CAN Version 0

2 Lod plin Letter/A4 pper Pull the pper try ompletely out of the mhine. d e Fn the stk of pper well to void pper jms nd misfeeds. Gently put the pper into the pper try print side down nd top edge first. Chek tht the pper is flt in the try. Importnt Do not push the pper in too fr. Open the pper try over. When you use Legl size pper, press nd hold the universl guide relese utton s you slide out the front of the pper try. With oth hnds, gently press nd slide the pper side guides nd then the pper length guide to fit the pper size. Mke sure tht the tringulr mrks on the pper side guides nd pper length guide line up with the mrk for the pper size you re using. 3 f Gently djust the pper side guides to the pper with oth hnds. Mke sure tht the pper side guides touh the edges of the pper. 2 3 2

g Close the pper try over. h Slowly push the pper try ompletely into the mhine. i While holding the pper try in ple, pull out the pper support until it liks, nd then unfold the pper support flp. 2 3

3 Connet the power ord nd telephone line Importnt DO NOT onnet the USB le yet (if you re using USB le). Connet the power ord. If you re shring one telephone line with n externl telephone, onnet it s shown elow. Before you onnet the externl telephone, remove the protetive p from the EXT. jk on the mhine. 2 Connet the telephone line ord. Connet one end of the telephone line ord to the jk on the mhine mrked LINE nd the other end to modulr wll jk. Extension telephone 2 Externl telephone If you re shring one telephone line with n externl telephone nswering mhine, onnet it s shown elow. Before you onnet the externl telephone nswering mhine, remove the protetive p from the EXT. jk on the mhine. Importnt The telephone line ord MUST e onneted to the jk on the mhine mrked LINE. Set the reeive mode to Externl TAD if you hve n externl nswering mhine. See Choose the orret Reeive Mode on pge 8. For dditionl detils, see Conneting n externl TAD (telephone nswering devie) in Chpter 7 of the User s Guide. 4

4 Instll the ink rtridges e Turn the green kno on the protetive yellow p lokwise until it liks to relese the vuum sel, then remove the p. WARNING If ink gets in your eyes, wsh them out with wter t one, nd if irrittion ours onsult dotor. Mke sure tht the power is turned on. The LCD shows: No Crtridge Instll Ink Blk Open the ink rtridge over. Remove the green protetive prt. f Tke re to mth the olor of the lever with the rtridge olor, s shown in the digrm elow. 2 d Do not throw wy the green protetive prt. You will need it if you trnsport the mhine. Unpk the ink rtridge. g Instll eh ink rtridge in the diretion of the rrow on the lel. 5

h Gently push the ink rtridge until it liks. After ll the ink rtridges re instlled lose the ink rtridge over. The mhine will prepre the ink tue system for printing. This proess will tke pproximtely four minutes. Do not turn off the mhine. Importnt DO NOT tke out ink rtridges if you do not need to reple them. If you do so, it my redue the ink quntity nd the mhine will not know the quntity of ink left in the rtridge. DO NOT shke the ink rtridges. If ink stins your skin or lothing, wsh with sop or detergent t one. DO NOT repetedly insert nd remove the rtridges. If you do so, ink my seep out of the rtridge. If you mix the olors y instlling n ink rtridge in the wrong position, len the print hed severl times fter orreting the rtridge instlltion. (See Clening the print hed in Appendix B of the User s Guide.) One you open n ink rtridge, instll it in the mhine nd use it up within six months of instlltion. Use unopened ink rtridges y the expirtion dte written on the rtridge pkge. DO NOT dismntle or tmper with the ink rtridge, this n use the ink to lek out of the rtridge. Brother strongly reommends tht you do not refill the ink rtridges provided with your mhine. We lso strongly reommend tht you ontinue to use only Genuine Brother Brnd replement ink rtridges. Using or ttempting to use potentilly inomptile inks nd/or rtridges in your mhine my use dmge to the mhine itself nd/or it my result in unstisftory print qulity. Our wrrnty overge does not pply to ny prolem tht ws used y the use of unuthorized third prty ink nd/or rtridges. To protet your investment nd gurntee your print qulity plese ontinue to reple onsumed ink rtridges with only Genuine Brother Brnded Supplies. 6

5 Chek the print qulity d The LCD sks you if the print qulity is OK for lk nd olor. Press (Yes) or 2 (No) on the dil pd. Blk OK?. When the preprtion proess hs finished, the LCD shows this messge Yes No Press Press Set Pper nd Press Strt After pressing (Yes) or 2 (No) for oth lk nd olor, the LCD shows: Strt Clening? Press Color Strt. Chek the qulity of the four olor loks on the sheet. (lk/yellow/yn/mgent) e f Yes No Press Press Press (Yes), the mhine will then strt lening the olors. After lening is finished, press Color Strt. The mhine strts printing the Print Qulity Chek Sheet gin. Go k to. If ll lines re ler nd visile, press (Yes) on the dil pd to finish the qulity hek. OK If you n see missing short lines, press 2 (No) on the dil pd nd go to d. Poor d e 6 Choose your lnguge (If needed) Press Menu. Press or to hoose Initil Setup. Press OK. Press or to hoose Lol Lnguge. Press OK. Press or to hoose your lnguge. Press OK. Press Stop/Exit. 7

7 Choose the orret Reeive Mode The orret Reeive Mode is determined y the externl devies nd telephone susrier servies (Voie Mil, Distintive Ring, et.) you hve (or will e using) on the sme line s the Brother mhine. Will you e using Distintive Ring numer for reeiving fxes? Brother uses the term "Distintive Ring" ut telephone ompnies my hve other nmes for this servie suh s Custom Ringing, RingMster, Personlized Ring, Teen Ring, Ident-A-Cll, nd Smrt Ring. See Distintive Ring in Chpter 7 of the User's Guide for instrution on setting up your mhine using this feture. Will you e using Voiemil on the sme telephone line s your Brother mhine? If you hve Voie Mil on the sme telephone line s your Brother mhine, there is strong possiility tht Voie Mil nd the Brother mhine will onflit with eh other when reeiving inoming lls. See Voie Mil in Chpter 7 of the User's Guide for instrutions on setting up your mhine using this servie. Will you e using Telephone Answering Devie on the sme telephone line s your Brother mhine? Your externl telephone nswering devie (TAD) will utomtilly nswer every ll. Voie messges re stored on the externl TAD nd fx messges re printed. Choose Externl TAD s your reeive mode. See the instrutions elow. Will you e using your Brother mhine on dedited fx line? Your mhine utomtilly nswers every ll s fx. Choose Fx Only s your reeive mode. See the instrutions elow. Will you e using your Brother mhine on the sme line s your telephone? Do you wnt to reeive voie lls nd fxes utomtilly? The Fx/Tel reeive mode is used when shring the Brother mhine nd your telephone on the sme line. Choose Fx/Tel s your reeive mode. See the instrutions elow. Importnt : You nnot reeive voie messges on either Voie Mil or n nswering mhine when hoosing the Fx/Tel mode. Do you expet to reeive very few fxes? Choose Mnul s your reeive mode. You ontrol the phone line nd must nswer every ll yourself. See the instrutions elow. For detils, see Using reeive modes in Chpter 6 of the User's Guide. d e Press Menu. Press or to hoose Initil Setup. Press OK. Press or to hoose Reeive Mode. Press d or to hoose the reeive mode. Press OK. Press Stop/Exit. 8

8 Set the LCD ontrst (If needed) If you re hving diffiulty reding the LCD, try hnging the ontrst setting. d e f 9 Set Press Menu. Press or to hoose Generl Setup. Press OK. Press or to hoose LCD Settings. Press OK. Press or to hoose LCD Contrst. Press d or to hoose Light, Med or Drk. Press OK. Press Stop/Exit. You n lso djust the ngle of the disply y lifting it. the dte nd time The mhine displys the time, nd if you set up the sttion ID the dte nd time will e dded to eh fx you send. Press Menu. Press or to hoose Initil Setup. Press OK. Press or to hoose Dte&Time. Press OK. d e f g h Enter the lst two digits of the yer on the dil pd, nd then press OK. Dte&Time Yer:20 08 MENU Input & Press OK (e.g. Enter 0 8 for 2008.) Enter the two digits for the month on the dil pd, nd then press OK. Dte&Time Month: 03 MENU Input & Press OK (e.g. Enter 0 3 for Mrh.) Enter the two digits for the dy on the dil pd, nd then press OK. Dte&Time Dy: 0 MENU Input & Press OK (e.g. Enter 0 for the first dy of the month.) Enter the time in 24-hour formt on the dil pd, nd then press OK. Dte&Time Time: 5:25 MENU Input & Press OK (e.g. Enter 5, 2 5 for 3:25 P.M.) Press Stop/Exit. To onfirm the urrent dte nd time, print out the User Settings report. (See Printing Reports in Chpter 9 of the User's Guide.) 9

0 Set your sttion ID You should store your nme nd fx numer to e printed on ll fx pges tht you send. d e Press Menu. Press or to hoose Initil Setup. Press OK. Press or to hoose Sttion ID. Press OK. Enter your fx numer (up to 20 digits) on the dil pd, nd then press OK. Enter your nme (up to 20 hrters) using the dil pd, nd then press OK. See the following hrt for entering your nme. If you need to enter hrter tht is on the sme key s the lst hrter, press to move the ursor to the right. If you entered letter inorretly nd wnt to hnge it, press d or to move the ursor to the inorret hrter, press Cler/Bk. f Press Stop/Exit. If you mke mistke nd wnt to strt gin, press Stop/Exit nd go k to. For detils, see Entering Text in Appendix C of the User's Guide. (USA only) The Telephone Consumer Protetion At of 99 mkes it unlwful for ny person to use omputer or eletroni devie to send ny messge vi telephone fx mhine unless suh messges lerly ontin, in mrgin t the top or ottom of eh trnsmitted pge, or on the first pge of the trnsmission, the dte nd time it is sent nd n identifition of the usiness or other entity or other individul sending the messge nd the telephone numer of the sending mhines or suh usiness, other entity or individul. Press key One time Two times Three times Four times 2 A B C 2 3 D E F 3 4 G H I 4 5 J K L 5 6 M N O 6 7 P Q R S 8 T U V 8 9 W X Y Z 0

Set tone or pulse diling mode 2 Automti Dylight Svings Time Your mhine omes set for Tone diling servie. If you hve Pulse diling servie (rotry), you need to hnge the diling mode. d e Press Menu. Press or to hoose Initil Setup. Press OK. Press or to hoose Tone/Pulse. Press d or to hoose Pulse (or Tone). Press OK. Press Stop/Exit. You n set the mhine to hnge utomtilly for dylight svings time. It will reset itself forwrd one hour in the Spring nd kwrd one hour in the Fll. d e Press Menu. Press or to hoose Generl Setup. Press OK. Press or to hoose Auto Dylight. Press d or to hoose On (or Off). Press OK. Press Stop/Exit.

3 Send in the Produt Registrtion nd Test Sheet (USA only) You n lso register your produt online using the On-Line Registrtion link from the instlltion CD-ROM or visit http://www.rother.om/registrtion/. e Press Blk Strt. You will reeive onfirmtion fx of your Produt Registrtion. Fill out the Produt Registrtion nd Test Sheet. Put the sheet fe down in the ADF (Automti Doument Feeder) or fe down on the snner glss. Mke sure (Fx) is illuminted in Blue. d Enter the toll-free fx numer: -877-268-9575. 2

4 Choose your onnetion type For USB interfe le Windows, go to pge 4 Mintosh, go to pge 8 For Wired Network Windows, go to pge 2 Mintosh, go to pge 26 USB Wired Network Windows Mintosh Windows Mintosh For Wireless Network Windows nd Mintosh, go to pge 29 Wireless Network 3

USB Windows For USB Interfe Users (For Windows 2000 Professionl/XP/ XP Professionl x64 Edition/ Windows Vist ) 5 Before you instll 6 Instll MFL-Pro Suite Mke sure tht your omputer is ON nd you re logged on with Administrtor rights. Importnt DO NOT onnet the USB le yet. If there re ny progrms running, lose them. Mke sure there re no memory rds or USB Flsh memory drive inserted. The sreen my differ depending on the operting system. The supplied CD-ROM inludes SnSoft PperPort SE. This softwre supports Windows 2000 (SP4 or greter), XP (SP2 or greter), XP Professionl x64 Edition nd Windows Vist. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Unplug the mhine from the AC outlet nd from your omputer, if you lredy onneted n interfe le. Put the supplied CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to My Computer (Computer), doule-lik the CD-ROM ion, nd then doule-lik strt.exe. The CD-ROM min menu will pper. Clik Instll MFL-Pro Suite. 4

USB If this sreen ppers, lik OK nd restrt your omputer. f Windows Choose Lol Connetion, nd then lik Next. The instlltion ontinues. If the instlltion does not ontinue utomtilly, open the min menu gin y ejeting nd then reinserting the CD-ROM or doule-lik the strt.exe progrm from the root folder, nd ontinue from to instll MFL- Pro Suite. For Windows Vist, when the User Aount Control sreen ppers, lik Allow. g When this sreen ppers, go to the next step. When the SnSoft PperPort SE Liense Agreement window ppers, lik Yes if you gree to the Softwre Liense Agreement. USB Windows Mintosh d e The instlltion of SnSoft PperPort SE will utomtilly strt nd is followed y the instlltion of MFL-Pro Suite. When the Brother MFL-Pro Suite Softwre Liense Agreement window ppers, lik Yes if you gree to the Softwre Liense Agreement. 5

USB Windows 7 Connet the USB le Crefully route the USB le through the trenh nd out the k of the mhine s shown elow nd onnet the le to your omputer. Importnt DO NOT onnet the mhine to USB port on keyord or non-powered USB hu. Connet the mhine diretly to your omputer. Using oth hnds, use the plsti ts on oth sides of the mhine to lift the snner over until it loks seurely into the open position. Importnt Mke sure tht the le does not restrit the over from losing, or n error my our. d Lift the snner over to relese the lok. Gently push the snner over support down nd lose the snner over. Connet the USB le to the USB soket mrked with symol. You will find the USB soket inside the mhine on the right s shown elow. 2 3 LAN USB 6

USB Windows Connet the power ord Finish nd restrt 8 Connet the power ord. The instlltion will ontinue utomtilly. The instlltion sreens pper one fter nother. 9 Clik Finish to restrt your omputer. After restrting the omputer, you must e logged on with Administrtor rights. Importnt DO NOT nel ny of the sreens during the instlltion. It my tke few seonds for ll sreens to pper. For Windows Vist, when this sreen ppers, lik the hek ox nd lik Instll to omplete the instlltion orretly. If n error messge ppers during the softwre instlltion, run the Instlltion Dignostis loted in Strt/All Progrms/Brother/ MFC-XXXX (where MFC-XXXX is your model nme). Finish Now go to The instlltion is now omplete. USB Windows Mintosh Proeed to Instll Optionl Applitions on pge 42. When the On-Line Registrtion sreen is displyed, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lose your we rowser to return to this window. Then lik Next. 7

USB Mintosh For USB Interfe Users (For M OS X 0.2.4 or greter) 5 Before you instll Mke sure your mhine is onneted to the power nd your Mintosh is ON. You must e logged on with Administrtor rights. Importnt For M OS X 0.2.0 to 0.2.3 users, upgrde to M OS X 0.2.4 or greter. (For the ltest informtion for M OS X, visit http://solutions.rother.om/) Mke sure there re no memory rds or USB Flsh memory drive inserted. Connet the USB le to the USB soket mrked with symol. You will find the USB soket inside the mhine on the right s shown elow. LAN USB 6 Connet the USB le Crefully route the USB le through the trenh nd out the k of the mhine s shown elow nd onnet the le to your Mintosh. Importnt DO NOT onnet the mhine to USB port on keyord or non-powered USB hu. Connet the mhine diretly to your Mintosh. Using oth hnds, use the plsti ts on oth sides of the mhine to lift the snner over until it loks seurely into the open position. Importnt Mke sure tht the le does not restrit the over from losing, or n error my our. d Lift the snner over to relese the lok. Gently push the snner over support down nd lose the snner over. 2 3 8

USB Mintosh 7 Instll MFL-Pro Suite e When this sreen ppers, lik OK. Put the supplied CD-ROM into your CD-ROM drive. f For M OS X 0.3.x or greter, the instlltion of MFL-Pro Suite is now omplete. Go to step 8 on pge 20. For M OS X 0.2.4 to 0.2.8 users, lik Add. Doule-lik the Strt Here OSX ion to instll. Choose Lol Connetion, nd then lik Next. Follow the on-sreen instrutions. g Choose USB. USB Windows Mintosh h Choose XXX-XXXX (where XXX-XXXX is your model nme), nd then lik Add. Plese wit, it will tke few seonds for the softwre to instll. After the instlltion, lik Restrt to finish instlling the softwre. d The Brother softwre will serh for the Brother devie. During this time the following sreen will pper. i Clik Print Center, then Quit Print Center. The instlltion of MFL-Pro Suite is now omplete. Go to step 8 on pge 20. 9

USB Mintosh 8 Instll Presto! PgeMnger When Presto! PgeMnger is instlled OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. Doule-lik the Presto! PgeMnger ion nd follow the on-sreen instrutions. For M OS X 0.2.4 to 0.3.8 users, when this sreen ppers, lik Go to downlod the softwre from the Brother Solutions Center wesite. Finish The instlltion is now omplete. 20

Wired Network Windows For Wired Network Interfe Users (For Windows 2000 Professionl/XP/ XP Professionl x64 Edition/ Windows Vist ) 5 Before you instll 6 Connet the network le Mke sure tht your omputer is ON nd you re logged on with Administrtor rights. Importnt Using oth hnds, use the plsti ts on oth sides of the mhine to lift the snner over until it loks seurely into the open position. If there re ny progrms running, lose them. Mke sure there re no memory rds or USB Flsh memory drive inserted. The sreens my differ depending on the operting system. The supplied CD-ROM inludes SnSoft PperPort SE. This softwre supports Windows 2000 (SP4 or greter), XP (SP2 or greter), XP Professionl x64 Edition nd Windows Vist. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Importnt Before instlltion, if you re using personl firewll softwre (other thn Windows Firewll), nti-spywre or ntivirus pplitions, temporrily disle them. Unplug the mhine from the AC outlet. Connet the network le to the LAN soket mrked with symol. You will find the LAN soket inside the mhine on the left s shown elow. LAN USB Wired Network Windows Mintosh 2

Wired Network Windows Crefully route the network le through the trenh nd out the k of the mhine. Then, onnet the le to your network. 7 Connet the power ord Connet the power ord. If oth USB nd LAN les re eing used, guide oth les through the trenh with one on top of the other. Importnt Mke sure tht the le does not restrit the over from losing, or n error my our. d Lift the snner over to relese the lok. Gently push the snner over support down nd lose the snner over. 2 3 Importnt If you hve previously set up your mhine for wireless network nd then wnt to set it up on wired network, you should hek tht the mhine s Network I/F is set to Wired LAN. The wireless network interfe will eome intive with this setting. On your mhine, press Menu. Press or to hoose Network nd press OK. Press or to hoose Network I/F nd press OK. Press or to hoose Wired LAN nd press OK. Press Stop/Exit. 22

Wired Network Windows 8 Instll MFL-Pro Suite Put the supplied CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If this sreen ppers, lik OK nd restrt your omputer. If the instlltion does not ontinue utomtilly, open the min menu gin y ejeting nd then reinserting the CD-ROM or doule-lik the strt.exe progrm from the root folder, nd ontinue from to instll MFL- Pro Suite. For Windows Vist, when the User Aount Control sreen ppers, lik Allow. If the Brother sreen does not pper utomtilly, go to My Computer (Computer), doule-lik the CD-ROM ion, nd then doule-lik strt.exe. The CD-ROM min menu will pper. Clik Instll MFL-Pro Suite. d e When the SnSoft PperPort SE Liense Agreement window ppers, lik Yes if you gree to the Softwre Liense Agreement. The instlltion of SnSoft PperPort SE will utomtilly strt nd is followed y the instlltion of MFL-Pro Suite. When the Brother MFL-Pro Suite Softwre Liense Agreement window ppers, lik Yes if you gree to the Softwre Liense Agreement. Wired Network Windows Mintosh 23

Wired Network Windows f Choose Wired Network Connetion, nd then lik Next. If the mhine is onfigured for your network, hoose the mhine from the list, nd then lik Next. This window will not pper if there is only one mhine onneted on the network, it will e hosen utomtilly. g For Windows XP SP2/Windows Vist users, when this sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion nd ontinue with the instlltion. (Reommended) nd lik Next. If your mhine shows APIPA in the IP Address field, lik Configure IP Address nd enter n IP ddress for your mhine tht is suitle for your network. If the mhine is not yet onfigured for use on your network, the following sreen ppers. If you re using firewll other thn Windows Firewll or Windows Firewll is off, this sreen my pper. See the instrutions provided with your firewll softwre for informtion on how to dd the following network ports. For network snning, dd UDP port 54925. For network PC-Fx reeiving, dd UDP port 54926. If you still hve troule with your network onnetion, dd UDP port 37. h Clik OK. The Configure IP Address window will pper. Enter n IP ddress for your mhine tht is suitle for your network y following the on-sreen instrutions. The instlltion of the Brother drivers will utomtilly strt. The instlltion sreens pper one fter nother. Importnt DO NOT nel ny of the sreens during the instlltion. It my tke few seonds for ll sreens to pper. 24

Wired Network Windows For Windows Vist, when this sreen ppers, lik the hek ox nd lik Instll to omplete the instlltion orretly. 9 Finish nd restrt Clik Finish to restrt your omputer. After restrting the omputer, you must e logged on with Administrtor rights. i When the On-Line Registrtion sreen is displyed, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lose your we rowser to return to this window. Then lik Next. If n error messge ppers during the softwre instlltion, run the Instlltion Dignostis loted in Strt/All Progrms/Brother/ MFC-XXXX (where MFC-XXXX is your model nme). 20 Instll MFL-Pro Suite on dditionl omputers (If needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 8 on pge 23. Also see step 5- on pge 2 efore you instll. The MFL-Pro Suite Softwre Liense permits instlltion on up to 2 network omputers. if you wnt to instll MFL-Pro Suite on dditionl omputers, you n purhse dditionl NL-5 (five user) liense greements from your uthorized Brother deler or ontt Brother ustomer servie. Wired Network Windows Mintosh Finish The instlltion is now omplete. Now go to Proeed to Instll Optionl Applitions on pge 42. 25

Wired Network Mintosh For Wired Network Interfe Users (For M OS X 0.2.4 or greter) 5 Before you instll Mke sure your mhine is onneted to the power nd your Mintosh is ON. You must e logged on with Administrtor rights. Importnt For M OS X 0.2.0 to 0.2.3 users, upgrde to M OS X 0.2.4 or greter. (For the ltest informtion for M OS X, visit http://solutions.rother.om/) Mke sure there re no memory rds or USB Flsh memory drive inserted. If you hve previously set up your mhine for wireless network nd then wnt to set it up on wired network, you should hek tht the mhine s Network I/F is set to Wired LAN. The wireless network interfe will e intive with this setting. On your mhine, press Menu. Press or to hoose Network nd press OK. Press or to hoose Network I/F nd press OK. Press or to hoose Wired LAN nd press OK. Press Stop/Exit. Connet the network le to the LAN soket mrked with symol. You will find the LAN soket inside the mhine on the left s shown elow. LAN USB Crefully route the network le through the trenh nd out the k of the mhine.then, onnet the le to your network. 6 Connet the network le Using oth hnds, use the plsti ts on oth sides of the mhine to lift the snner over until it loks seurely into the open position. Importnt Mke sure tht the le does not restrit the over from losing, or n error my our. If oth USB nd LAN les re eing used, guide oth les through the trenh with one on top of the other. d Lift the snner over to relese the lok. Gently push the snner over support down nd lose the snner over. 2 3 26

Wired Network Mintosh 7 Instll MFL-Pro Suite Put the supplied CD-ROM into your CD-ROM drive. If the mhine is onfigured for your network, hoose the mhine from the list, nd then lik OK. This window will not pper if there is only one mhine onneted on the network, it will e hosen utomtilly. Go to e. Doule-lik the Strt Here OSX ion to instll. If this sreen ppers lik OK. Enter nme for your Mintosh in Disply Nme up to 5 hrters long nd lik OK. Go to e. d Choose Wired Network Connetion, nd then lik Next. Follow the on-sreen instrutions. Plese wit, it will tke few seonds for the softwre to instll. After the instlltion, lik Restrt to finish instlling the softwre. The Brother softwre will serh for the Brother devie. During this time the following sreen will pper. e If you wnt to use the mhine s Sn key to sn over the network you must hek the Register your omputer with the Sn To funtion on the mhine ox. The nme you enter will pper on the mhine s LCD when you press the Sn key nd hoose sn option. (For more informtion, see Network Snning in the Softwre User s Guide on the CD-ROM.) When this sreen ppers, lik OK. Wired Network Windows Mintosh For M OS X 0.3.x or greter, the instlltion of MFL-Pro Suite is now omplete. Go to step 8 on pge 28. 27

f g Wired Network For M OS X 0.2.4 to 0.2.8 users, lik Add. Mke the seletion shown elow. Mintosh 8 Instll Presto! PgeMnger When Presto! PgeMnger is instlled OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. Doule-lik the Presto! PgeMnger ion nd follow the on-sreen instrutions. h Choose XXX-XXXX (where XXX-XXXX is your model nme), nd then lik Add. For M OS X 0.2.4 to 0.3.8 users, when this sreen ppers, lik Go to downlod the softwre from the Brother Solutions Center wesite. i Clik Print Center, then Quit Print Center. 9 Instll MFL-Pro Suite on dditionl omputers (If needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 7 on pge 27. Also see step 5- on pge 26 efore you instll. Finish The instlltion is now omplete. The instlltion of MFL-Pro Suite is now omplete. Go to step 8 on pge 28. 28

For Wireless Network Users For Wireless Network Interfe Users 5 Before you egin First you must onfigure the wireless network settings of your mhine to ommunite with your network ess point (router). After the mhine is onfigured to ommunite with your ess point (router) omputers on your network will hve ess to the mhine. To use the mhine from these omputers, you will need to instll the drivers nd softwre. The following steps will guide you through the onfigurtion nd instlltion proess. To hieve optimum results with norml everydy doument printing, ple the Brother mhine s lose to the network ess point (router) s possile with miniml ostrutions. Lrge ojets nd wlls etween the two devies s well s interferene from other eletroni devies n ffet the dt trnsfer speed of your douments. Due to these ftors, wireless my not e the est method of onnetion for ll types of douments nd pplitions. If you re printing lrge files, suh s multi-pge douments with mixed text nd lrge grphis, you my wnt to onsider hoosing wired Ethernet for fster dt trnsfer or USB for the fstest throughput speed. Although the Brother MFC-490CW n e used in oth wired nd wireless network, only one of the onnetion methods n e used t time. Importnt If you hve previously onfigured the wireless settings of the mhine you must reset the network (LAN) settings efore you n onfigure the wireless settings gin. On your mhine, press Menu. Press or to hoose Network nd press OK. Press or to hoose Ftory Reset, nd then press OK. Press twie for Yes to ept the hnge. The following instrutions re for infrstruture mode. To set up your mhine in ny other wireless environment you n find instrutions in the Network User's Guide on the CD-ROM. You n view the Network User s Guide y following the instrutions elow. Turn on your omputer/mintosh. Insert the Brother CD-ROM into your CD-ROM drive. For Windows : 2 Choose your model nd the lnguge. The CD-ROM min menu will pper. 3 Clik Doumenttion, nd then lik HTML douments. For Mintosh : 2 Doule-lik Doumenttion, nd then doule-lik your lnguge folder. 3 Doule-lik top.html. Infrstruture Mode 4 3 2 Wireless Network Aess Point (router) Wireless Network mhine (your mhine) Wireless ple omputer onneted to the ess point d Wired omputer onneted to the ess point 29

For Wireless Network Users 6 Confirm your network environment (Infrstruture Mode) The following instrutions will offer two methods for instlling your Brother mhine in wireless network environment. Both methods re for infrstruture mode, using wireless router or ess point tht uses DHCP to ssign IP ddresses. Choose onfigurtion method nd proeed to the pge indited. If your wireless router/ess point does not support SeureEsySetup, Wi-Fi Proteted Setup or AOSS, write down the wireless network settings of your ess point or wireless router. Importnt If you do not know this informtion (Network Nme, WEP key or WPA2-PSK (Pre-Shred Key)), you nnot ontinue the wireless setup. You should see the doumenttion provided with your ess point or wireless router, onsult the router mnufturer, or your system dministrtor. SSID (Servie Set ID or Network nme) Authentition (Open System or Shred Key)/Enryption Type (None or WEP) WEP Key (if needed) WPA/WPA2-PSK Enryption type (TKIP or AES) (if needed) 2 WPA/WPA2-PSK (Pre-Shred Key) (if needed) 2 The WEP key is for 64-it enrypted networks or 28-it enrypted networks nd n ontin oth numers nd letters. If you do not know this informtion you should see the doumenttion provided with your ess point or wireless router. This key is 64- it or 28-it vlue tht must e entered in n ASCII or HEXADECIMAL formt. For exmple: 64-it ASCII: 64-it Hexdeiml: 28-it ASCII: 28-it Hexdeiml: Uses 5 text hrters e.g. Hello (this is se sensitive) Uses 0 digits of hexdeiml dt e.g. 7f2234 Uses 3 text hrters e.g. Wirelessomms (this is se sensitive) Uses 26 digits of hexdeiml dt e.g. 7f223456d709e5423 2 WPA/WPA2-PSK is Wi-Fi Proteted Aess Pre-Shred Key, whih lets the Brother wireless mhine ssoite with ess points using TKIP or AES enryption (WPA-Personl). WPA/WPA2-PSK (TKIP or AES) uses Pre-Shred Key (PSK) tht is 8 or more hrters in length, up to mximum of 63 hrters. Now go to pge 3 If your wireless router/ess point supports utomti wireless (one-push) setup (SeureEsySetup, Wi-Fi Proteted Setup or AOSS ) Now go to pge 33 30

For Wireless Network Users Conneting the Brother mhine to the wireless network 7 Configure the wireless settings (Typil Wireless Setup in infrstruture mode) On your mhine, press Menu. Press or to hoose Network nd press OK. Press or to hoose WLAN nd press OK. Press or to hoose Setup Wizrd nd press OK. When Network I/F swithed to Wireless is displyed, press OK to ept. This will strt the wireless setup wizrd. To nel, press Cler/Bk. The mhine will serh for ville SSIDs. If list of SSIDs is displyed, use the or keys to hoose the SSID you wrote down in step 6 on pge 30, then press OK. Go to f. It will tke severl seonds to disply list of ville SSIDs. d e If your ess point is set to not rodst the SSID you will hve to mnully dd the SSID nme. Go to. Press or to hoose <New SSID> nd press OK. Go to d. Enter the SSID you wrote down in step 6 on pge 30 using the dil pd to hoose eh letter or numer. You n use the d nd keys to move the ursor left nd right. For exmple, to enter the letter, press the 2 key on the dil pd one. To enter the numer 3, press the 3 key on the dil pd seven times. The letters pper in this order: lower se, upper se nd then numers. (For more informtion, see Entering Text for Wireless Settings on pge 46.) Press OK when you hve entered ll the hrters. Press or to hoose Infrstruture, then press OK. f g h Use the, nd OK keys to hoose one of the options elow: If your network is onfigured for Authentition nd Enryption you must mth the settings used for your network. No Authentition or Enryption: Choose Open System, press OK then hoose None for Enryption Type? nd press OK. Then press for Yes to pply your settings. Go to i. No Authentition with WEP Enryption: Choose Open System, press OK then use the or to hoose WEP for the Enryption Type? nd press OK. Go to g. Authentition with WEP Enryption: Choose Shred Key nd press OK. Go to g. Authentition with WPA/WPA2-PSK (TKIP or AES) Enryption: Choose WPA/WPA2-PSK nd press OK. Go to h. Choose the pproprite key numer nd press OK. Enter the WEP key you wrote down in step 6 on pge 30 using the dil pd to hoose eh letter or numer. You n use the d nd keys to move the ursor left nd right. For exmple, to enter the letter, press the 2 key on the dil pd one. To enter the numer 3, press the 3 key on the dil pd seven times. The letters pper in this order: lower se, upper se nd then numers. (For more informtion, see Entering Text for Wireless Settings on pge 46.) Press OK when you hve entered ll the hrters, then press for Yes to pply your settings. Go to i. Press or to hoose TKIP or AES for Enryption Type? nd press OK. Enter the WPA/WPA2-PSK pssword you wrote down in step 6 on pge 30 using the dil pd to hoose eh letter or numer. Wireless Network 3

For Wireless Network Users You n use the d nd keys to move the ursor left nd right. For exmple, to enter the letter, press the 2 key on the dil pd one. To enter the numer 3, press the 3 key on the dil pd seven times. The letters pper in this order: lower se, upper se nd then numers. (For more informtion, see Entering Text for Wireless Settings on pge 46.) i Press OK when you hve entered ll the hrters, then press for Yes to pply your settings. Go to i. Your mhine will now try to onnet to your wireless network using the informtion you hve entered. If suessful, Conneted will pper riefly on the LCD. If your mhine does not suessfully onnet to your network, verify your network settings olleted in step 6 on pge 30, then repet to h to mke sure you hve entered the orret informtion. If your ess point does not hve DHCP enled you will need to mnully onfigure the IP ddress, sunet msk nd gtewy of the mhine to suit your network. See the Network User s Guide for detils. Wireless setup is now omplete. A four level inditor t the top of your mhine s LCD will show the wireless signl strength of your ess point or router. To instll MFL-Pro Suite, ontinue to step 8. For Windows Users: Now go to Pge 35 For M OS Users: Now go to Pge 39 32

For Wireless Network Users 7 Configure the wireless settings using the utomti wireless (onepush) method Confirm your wireless router or ess point hs the SeureEsySetup, Wi-Fi Proteted Setup or AOSS symol s shown elow. e If the LCD shows Conneted, the mhine hs suessfully onneted to your router or ess point. You n now use your mhine in wireless network. If the LCD shows Setting WLAN, Conneting SES (Conneting WPS or Conneting AOSS), then Connetion Filed, the mhine hs not suessfully onneted to your router or ess point. Try strting from gin. If the sme messge is indited gin, reset the mhine k to the defult ftory settings nd try gin. For resetting, see Restore the network settings to ftory defult on pge 46. d Ple the Brother mhine within rnge of SeureEsySetup, Wi-Fi Proteted Setup or AOSS ess point/router. The rnge my differ depending on your environment. Refer to the instrutions provided with your ess point/router. Push the SeureEsySetup, Wi-Fi Proteted Setup or AOSS utton on your wireless router or ess point. See the user s guide for your wireless router or ess point for instrutions. On your mhine, press Menu. Press or to hoose Network nd press OK. Press or to hoose WLAN nd press OK. Press or to hoose SES/WPS/AOSS nd press OK. When Network I/F swithed to Wireless is displyed, press OK to ept. This will strt the wireless setup wizrd. To nel, press Cler/Bk. This feture will utomtilly detet whih mode (SeureEsySetup, Wi-Fi Proteted Setup or AOSS ) your ess point uses to onfigure your mhine. If your wireless ess point supports Wi-Fi Proteted Setup (PIN Method) nd you wnt to onfigure your mhine using the PIN (Personl Identifition Numer) Method, see Using the PIN Method of Wi-Fi Proteted Setup in the Network User s Guide on the CD-ROM. If the LCD shows Setting WLAN, then Connetion Filed or Inorret Mode, session overlp or onnetion filure ws deteted. (see the tle elow), the mhine hs deteted 2 or more routers or ess points on your network tht hve the SeureEsySetup, Wi-Fi Proteted Setup mode or AOSS mode enled. Mke sure tht only one router or ess point hs the SeureEsySetup, Wi-Fi Proteted Setup mode or AOSS mode enled nd try strting from gin. LCD messges when using the SES/WPS/AOSS ontrol pnel menu Setting WLAN Serhing or essing the ess point nd downloding settings from the ess point. Conneting SES/WPS/AOSS Connetion Filed Inorret Mode Conneted Conneting to the ess point. Connetion filed. If this is shown fter the LCD shows Conneting SES/WPS/AOSS, session overlp ws deteted. A session overlp ws deteted. The mhine hs suessfully onneted. If you enounter prolem during setup, temporrily ple your mhine loser to the wireless ess point, nd go k to. Wireless setup is now omplete. Wireless Network 33

For Wireless Network Users Wireless setup is now omplete. To instll MFL-Pro Suite, ontinue to step 8. For Windows Users: Pge 35 Now go to For M OS Users: Pge 39 Now go to 34

Wireless Network Windows Instll the Drivers & Softwre (For Windows 2000 Professionl/XP/XP Professionl x64 Edition/ Windows Vist ) 8 Before you instll MFL-Pro Suite Mke sure tht your omputer is ON nd you re logged on with Administrtor rights. Importnt If there re ny progrms running, lose them. Mke sure there re no memory rds or USB Flsh memory drive inserted. The sreens my differ depending on the operting system. The supplied CD-ROM inludes SnSoft PperPort SE. This softwre supports Windows 2000 (SP4 or greter), XP (SP2 or greter), XP Professionl x64 Edition nd Windows Vist. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Importnt Before instlltion, if you re using personl firewll softwre (other thn Windows Firewll), nti-spywre or ntivirus pplitions, temporrily disle them. 9 Instll MFL-Pro Suite Put the supplied CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to My Computer (Computer), doule-lik the CD-ROM ion, nd then doule-lik strt.exe. The CD-ROM min menu will pper. Clik Instll MFL-Pro Suite. Windows Mintosh Wireless Network 35

Wireless Network Windows If this sreen ppers, lik OK nd restrt your omputer. f Choose Wireless Network Connetion, nd then lik Next. If the instlltion does not ontinue utomtilly, open the min menu gin y ejeting nd then reinserting the CD-ROM or doule-lik the strt.exe progrm from the root folder, nd ontinue from to instll MFL- Pro Suite. For Windows Vist, when the User Aount Control sreen ppers, lik Allow. g Clik on Cheked nd onfirmed hek ox, nd then lik Next. When the SnSoft PperPort SE Liense Agreement window ppers, lik Yes if you gree to the Softwre Liense Agreement. h For Windows XP SP2/Windows Vist users, when this sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion nd ontinue with the instlltion. (Reommended) nd lik Next. If you re using firewll other thn Windows Firewll or Windows Firewll is off, this sreen my pper. d e The instlltion of SnSoft PperPort SE will utomtilly strt nd is followed y the instlltion of MFL-Pro Suite. When the Brother MFL-Pro Suite Softwre Liense Agreement window ppers, lik Yes if you gree to the Softwre Liense Agreement. See the instrutions provided with your firewll softwre for informtion on how to dd the following network ports. For network snning, dd UDP port 54925. For network PC-Fx reeiving, dd UDP port 54926. If you still hve troule with your network onnetion, dd UDP port 37. 36

Wireless Network Windows If the mhine is onfigured for your network, hoose the mhine from the list, nd then lik Next. This window will not pper if there is only one mhine onneted on the network, it will e hosen utomtilly. i The instlltion of the Brother drivers will utomtilly strt. The instlltion sreens pper one fter nother. Importnt DO NOT nel ny of the sreens during the instlltion. It my tke few seonds for ll sreens to pper. For Windows Vist, when this sreen ppers, lik the hek ox nd lik Instll to omplete the instlltion orretly. If your mhine shows APIPA in the IP Address field, lik Configure IP Address nd enter n IP ddress for your mhine tht is suitle for your network. If your wireless settings fil, n error messge will pper during the instlltion of MFL-Pro Suite nd the instlltion will e terminted. If you enounter this filure, go to step 6 on pge 30 nd setup the wireless onnetion gin. If you re using WEP nd the LCD displyed 'Conneted' ut your mhine is not found, mke sure you entered the WEP key orretly. The WEP key is se sensitive. j When the On-Line Registrtion sreen is displyed, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lose your we rowser to return to this window. Then lik Next. If the mhine is not yet onfigured for use on your network, the following sreen ppers. Clik OK. The Configure IP Address window will pper. Enter n IP ddress for your mhine tht is suitle for your network y following the on-sreen instrutions. Wireless Network Windows Mintosh 37

Wireless Network Windows 20 Finish nd restrt Clik Finish to restrt your omputer. After restrting the omputer, you must e logged on with Administrtor rights. If n error messge ppers during the softwre instlltion, run the Instlltion Dignostis loted in Strt/All Progrms/Brother/ MFC-XXXX (where MFC-XXXX is your model nme). 2 Instll MFL-Pro Suite on dditionl omputers (If needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 8 on pge 35. The MFL-Pro Suite Softwre Liense permits instlltion on up to 2 network omputers. if you wnt to instll MFL-Pro Suite on dditionl omputers, you n purhse dditionl NL-5 (five user) liense greements from your uthorized Brother deler or ontt Brother ustomer servie. Finish The instlltion is now omplete. Now go to Proeed to Instll Optionl Applitions on pge 42. 38

Wireless Network Mintosh Instll the Drivers & Softwre (For M OS X 0.2.4 or greter) 8 Before you instll MFL-Pro Suite Mke sure your mhine is onneted to the power nd your Mintosh is ON. You must e logged on with Administrtor rights. Choose Wireless Network Connetion, nd then lik Next. Importnt For M OS X 0.2.0 to 0.2.3 users, upgrde to M OS X 0.2.4 or greter. (For the ltest informtion for M OS X, visit http://solutions.rother.om/) Mke sure there re no memory rds or USB Flsh memory drive inserted. d Clik on the Cheked nd onfirmed hek ox, nd then lik Next. Follow the on-sreen instrutions. 9 Instll MFL-Pro Suite Put the supplied CD-ROM into your CD-ROM drive. Plese wit, it will tke few seonds for the softwre to instll. After the instlltion, lik Restrt to finish instlling the softwre. e The Brother softwre will serh for the Brother devie. During this time the following sreen will pper. Doule-lik the Strt Here OSX ion to instll. Windows Mintosh Wireless Network 39

Wireless Network Mintosh If the mhine is onfigured for your network, hoose the mhine from the list, nd then lik OK. This window will not pper if there is only one mhine onneted on the network, it will e hosen utomtilly. Go to f. f g When this sreen ppers, lik OK. For M OS X 0.3.x or greter, the instlltion of MFL-Pro Suite is now omplete. Go to step 20 on pge 4. For M OS X 0.2.4 to 0.2.8 users, lik Add. If your mhine is not deteted, go to step 6 on pge 30 nd setup the wireless onnetion gin. If you re using WEP nd the LCD displyed 'Conneted' ut your mhine is not found, mke sure you entered the WEP key orretly. The WEP key is se sensitive. h Mke the seletion shown elow. If this sreen ppers lik OK. Enter nme for your Mintosh in Disply Nme up to 5 hrters long nd lik OK. Go to f. i Choose XXX-XXXX (where XXX-XXXX is your model nme), nd then lik Add. If you wnt to use the mhine s Sn key to sn over the network you must hek the Register your omputer with the Sn To funtion on the mhine ox. The nme you enter will pper on the mhine s LCD when you press the Sn key nd hoose sn option. (For more informtion, see Network Snning in the Softwre User s Guide on the CD-ROM.) j Clik Print Center, then Quit Print Center. The instlltion of MFL-Pro Suite is now omplete. Go to step 20 on pge 4. 40

Wireless Network Mintosh 20 Instll Presto! PgeMnger When Presto! PgeMnger is instlled OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. Doule-lik the Presto! PgeMnger ion nd follow the on-sreen instrutions. For M OS X 0.2.4 to 0.3.8 users, when this sreen ppers, lik Go to downlod the softwre from the Brother Solutions Center wesite. 2 Instll MFL-Pro Suite on dditionl omputers (If needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 8 on pge 39. Finish The instlltion is now omplete. Windows Mintosh Wireless Network 4

Instll Optionl Applitions Windows Instll FeFilter Studio supported y Rellusion, In 2 Instll FeFilter Studio Help FeFilter Studio is n esy-to-use orderless photo printing pplition. FeFilter Studio lso lets you edit your photo dt nd dd photo effets suh s red eye redution or skin tone enhnement. Importnt The mhine must e ON nd onneted to the omputer. The omputer must e onneted to the Internet. Open the min menu gin y ejeting nd then reinserting the CD-ROM or y douleliking the strt.exe progrm from the root folder. The CD-ROM min menu will pper. Choose your lnguge nd then lik Additionl Applitions. To get instrutions on how to use FeFilter Studio, downlod nd instll FeFilter Studio Help. To run FeFilter Studio, go to Strt/All Progrms/Rellusion/ FeFilter Studio on your omputer. Clik the utton on the upper right orner of the sreen. d e Clik Chek for updtes to go to the Rellusion updte we pge. Clik the Downlod utton nd hoose folder to sve the file in. Close FeFilter Studio efore you strt the instller for FeFilter Studio Help. Doule-lik the downloded file from the folder you speified nd follow the on-sreen instrutions for instlltion. Clik the FeFilter Studio utton to instll. To view the omplete FeFilter Studio Help, hoose Strt/All Progrms/Rellusion/ FeFilter Studio/FeFilter Studio Help on your omputer. 42

Instll Optionl Applitions Windows 3 Instll BookSn&Whiteord Suite supported y Rellusion, In You n instll BookSn&Whiteord Suite. The BookSn Enhner softwre n orret your snned ook imges utomtilly. The Whiteord Enhner softwre lens up nd enhnes text nd imges from photos tken of your whiteord. (Internet ess required.) Importnt The mhine must e ON nd onneted to the omputer. The omputer must e onneted to the Internet. Open the min menu gin y ejeting nd then reinserting the CD-ROM or y douleliking the strt.exe progrm from the root folder. The CD-ROM min menu will pper. Choose your lnguge nd then lik Additionl Applitions. Clik the BookSn&Whiteord Suite utton to instll. 43

For Network Users BRAdmin Light utility (For Windows users) BRAdmin Light is utility for initil setup of Brother network onneted devies. It lso n serh for Brother produts on your network, view the sttus nd onfigure si network settings, suh s IP ddress. For more informtion on BRAdmin Light, visit us t http://solutions.rother.om/. If you require more dvned printer mngement, use the ltest Brother BRAdmin Professionl utility version tht is ville s downlod from http://solutions.rother.om/. Instll the BRAdmin Light onfigurtion utility Clik Advned nd then Network Utilities on the menu sreen. Set your IP ddress, Sunet Msk nd Gtewy using BRAdmin Light If you hve DHCP/BOOTP/RARP server in your network, you don t hve to do the following opertion. The mhine will utomtilly otin its own IP ddress. Strt BRAdmin Light. It will serh for new devies utomtilly. Doule-lik the unonfigured devie. Clik BRAdmin Light nd follow the on-sreen instrutions. Choose STATIC for the Boot Method. Enter the IP Address, Sunet Msk nd Gtewy, nd then lik OK. d The ddress informtion will e sved to the mhine. 44