Trailer Telematics BY KÄSSBOHRER Enginuity, since 1893
TRAILER TELEMATICS VALUE-ADDED SUPPLY-CHAIN MANAGEMENT Trailer Telematics is widely used in temperature-controlled transport, dangerous goods transport, intermodal transport, rental business and high value goods transport. The information regarding the location of trailer via GPS is the basic feature of any trailer telematics system. The telematics systems can be configured and installed according to your company needs. Relevant data for the fleet management will be transmitted in real time to the data servers where the data will be stored and archived for future uses. The most prefered features in a telematics system are: Data from EBS System like overload, axle load, speed, total mileage, next service, EBS status, roll stability support etc. Door status: door open/ close activity to control and secure the cargo during the transport Truck ID Data for the information on truck-trailer combinations Temperature Monitoring Data to monitor the temperature deviations, operating mode of the cooler unit, status of the cooler unit etc. Temperature data will be stored for 18 months
components 3 4 1 2 1- Telematics Control Unit Main board The control unit with integrated motion sensor embodies the necessary hard and software to transmit the information to the data servers. 2- CAN Cable Control area network The control area network line transmits the data generated in the ebs module into the telematics control units to be transmitted to the server. 3- Sensor Cable Interconnetion cable sensor cable gathers the data generated from different sensors like door sensor, temperature sensor, couple sensor etc. 4- Cooler Unit Connection Cable Temperature-controlled transport The cooler unit connection cable transmits the data from the cooler s unit data logger to telematics control unit. Enginuity, since 1893
REPORTING INFRASTRUCTURE PORTAL & WEB SERVICES DATA PORTAL TELEMATICS SERVICE PORTAL CUSTOMER ERP SYSTEM REPORTING TOOL
SOLUTION PARTNER idem GmbH idem transport solutions was founded in 2004, as part of idem GmbH, to provide transport operators with clear guidance in the areas of refrigeration, temperature recording, loading and telematics. With more than 10 years experience in these specific areas of the world of transport, idem offers comprehensive trailer telematics solution to the industry. İdem s business solutions may be utilised for all vehicle types such as trucks, trailers, swap bodies etc. and in a wide range of applications e.g. temperature control, positioning, historical driven routes, documentation of all door activities with alarm messages (SMS, email), collection of technical data from EBS systems. Whether as a stand-alone product for the trailer or as "total telematics" system by coupling with a tractor system (navigation, integration of job or driver communication) - idem makes available the necessary components to identify customer specific requirements and provide innovative solutions. Packages configurated based on the most demanded features in trailer telematics. idem s telematics system hardware is named as TControl. TControl unit size and features may change based on your identified package preference. The available two telematics hardware solutions are respectively, TControl Pos and TControl Cool. Basic package provides the essential information regarding the vehicle positioning. It enables you to control the location of your trailers in a,user-friendly web-based application that includes a user-friendly map. After a movement an update will be sent automatically, where the next update will follow 4 hours later. If the trailer does not move an update will be sent every 24 hour. idem GmbH is a member of BPW Group. Enginuity, since 1893
THE PACKAGES DEMANDED FEATURES IN TRAILER TELEMATICS The packages configurated based on the mostly demanded features in trailer telematics. TControl unit size and features may change based on your identified package preference. idem s telematics system hardware is named as TControl. The available two telematics hardware units are respectively, TControl Pos and TControl Cool. BASIC PACKAGE TO LOCATE THE TRAILER Basic package provides the essential information regarding the vehicle positioning. It enables you to control the location of your trailers in a,user-friendly web-based application that includes a user-friendly map. After a movement an update will be sent automatically, where the next update will follow 4 hours later. If the trailer does not move an update will be sent every 24 hour. TELEMATICS PACKAGES COMPONENTS 1-TControl POS inclusive battery pack for ca. 4 years. 2-GPS (predelivered SIM) ADVANCED PACKAGE TO SECURE THE GOODS In addition to intermediate package service offering, the advanced package offers the door sensor to control door activities and cargo integrity. Door sensors also enable the fleet manager to control time, place and duration of the loading and unloading activities. Advanced package enables the system to send alarm as well if unscheduled / unexpected door activity takes place. Advanced package offers coupling status, tire pressure condition and Truck ID as an option. ADVANCED PACKAGE COMPONENTS 1- TControl POS 2- GPS (predelivered SIM) 3- CAN CABLE 4- SENSOR CABLE INTERMEDIATE PACKAGE TO MANAGE OPERATION COST Intermediate package enables you to track your trailers in real time, in a user-friendly web-based application that includes a user-friendly map. This package also enables you to monitor the EBS data and the driven routes with clear fleet overviews and reporting. The data will be stored for 6 months. The stored data will enable you to conduct route optimization and vehicle utilization analyses. Furthermore, different geofencing options will enable you to control driven routes and to track route deviations on time, which will help you to optimize your operating costs. Information like: total mileage, driven km s per trip, next service needed, current speed, EBS-overload, ignition status, EBS status etc. is always available in real time for the fleet manager. Integrated motion sensor assures optimal internal battery usage and alarms you in case of unauthorised trailer movement or incorrect usage of EBS like, driving without ISO/EBS cable. Intermediate package offers door sensors, tire pressure condition, coupling status, and truck recognition as an option. COOL PACKAGE EXCELL IN PERISHABLE GOOD TRANSPORT Cool package provides 100% reliable data during temperaturecontrolled transport while providing one solution for all cooler models. Temperature data is recorded and archived for 18 months which is available in a user-friendly web-based application at any time. The system monitors temperature deviations and notifies the quality manager immediately if necessary. Reefer alarms and fuel tank sensor data are part of the package. Cool package offers coupling status, tire pressure condition, Truck ID and fuel tank display as an option. COOL PACKAGE COMPONENTS 1- TControl Cool 2- GPS (predelivered SIM) 3- CAN CABLE 4- SENSOR CABLE 5- COOLER CONNECTION CABLE INTERMEDIATE PACKAGE COMPONENTS 1- TControl POS 2- GPS (predelivered SIM) 3- CAN CABLE FOR EBS SYSTEM
PROVIDING COMPREHENSIVE CUSTOMER SUPPORT Kässbohrer Telematics systems offer both hardware and software services. Preconfigured hardware will be installed by Kässbohrer during production. Based on your own IT infrastrucuture and possibilities, Kässbohrer will provide you together with partner idem needed support regarding needed data integrations. Kässbohrer telematics is designed to enable data export to external systems. Kässbohrer portal is a web-based application and there is no additional software needed. The warranty period is 2 years after delivery of your semitrailer. More than 200 service points in Europe are trained and able to service Kässbohrer Telematics systems. Enginuity, since 1893
Kässbohrer Fahrzeugwerke GmbH Siemensstraße 74, 47574, Goch Deutschland T 0049 2823 9721-0 F 0049 2823 9721-21 info@kaessbohrer.com www.kaessbohrer.com